微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 10288 | 岸上和海上管路鋼管及配件 外表兩層噴涂聚乙烯底化 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| EN 1274 | 熱噴涂 粉末、成份、交貨技術條件 | Thermal spraying - Powders - Composition - Technical supply conditions |
| EN 13214 | 熱噴涂 熱噴涂協作 任務和責任 | Thermal spraying - Thermal spray coordination - Tasks and responsibilities |
| EN 1395 | 熱噴涂 熱噴涂設備的驗收檢驗 | Thermal spraying - Acceptance inspection of thermal spraying equipment |
| EN 1953 | 涂覆材料的霧化和噴涂設備 安全要求 | Atomising and spraying equipment for coating materials - Safety requirements |
| EN 465-1995+A1 | 防護服 液態化學品防護 服裝不同部分間噴涂密封連接的化學品防護服的性能要求（4型設備） | Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing (Type 4 equipment) |
| EN 50053-1 | 使用易燃噴涂材料的靜電噴涂器的選擇、安裝和使用要求 第1部分：能量極限為0.24mJ的手持靜電噴漆槍及有關 | Requirements for the selection, installation and use of electrostatic spraying equipment for flammable spraying materials - Part 1: Hand-held electrostatic paint spray guns with an energy limit of O.24 mJ and their associated apparatus |
| EN 50053-2 | 使用易燃材料的靜電噴涂器的選擇、安裝和使用要求 第2部分：能量極限為5mJ的手持靜電噴粉槍及有關裝置 | Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - part 2: Hand-held electrostatic powder spray guns with an energy limit of 5 mJ and their associated apparatus |
| EN 50053-3 | 使用易燃材料的靜電噴涂器的選擇、安裝和使用要求 第3部分：能量極限為0.24mJ 或5mJ的手持靜電纖維填料噴 | Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - Part 3: Hand - held electrostatic flock spray guns with an energy limit of 0,24 mJ or 5 mJ and their associated apparatus |
| EN 50059 | 涂漆和飾面用不可燃材料手持靜電噴涂設備規范 | Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
| EN 50176 | 易燃液體噴涂材料用自動靜電噴涂裝置 | Automatic electrostatic spraying installations for flammable liquid spraying material |
| EN 50177 | 易燃噴涂粉末用自動靜電噴涂裝置 | Automatic electrostatic spraying installations for flammable coating powder |
| EN 582 | 熱噴涂層 抗拉粘附強度的測定 | Thermal spraying; determination of tensile adhesive strength |
| EN ISO 14918 | 熱噴涂 熱噴涂人員的資格考查 | Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998) |
| EN ISO 14919 | 熱噴涂 火焰噴涂和電弧噴涂用金屬絲、條及軟線 分類 技術交貨條件 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions (ISO 14919:2001) |
| EN ISO 14920 | 熱噴涂 自熔合金的噴涂及重熔 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999) |
| EN ISO 14921 | 熱噴涂 工程元件用熱噴涂料的應用程序 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2001) |
| EN ISO 14922-1 | 熱噴涂 熱噴涂結構的質量要求 第1部分：選擇和應用指南 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999) |
| EN ISO 14922-2 | 熱噴涂 熱噴涂結構的質量要求 第2部分：全面質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999) |
| EN ISO 14922-3 | 熱噴涂 熱噴涂結構的質量要求 第3部分：標準質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) |
| EN ISO 14922-4 | 熱噴涂 熱噴涂結構的質量要求 第4部分：基本質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999) |
| EN ISO 14923 | 熱噴涂 熱噴涂涂料的性能與試驗 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO/FDIS 14923:2002) |
| EN ISO 8028 | 真空噴涂漆用橡膠和／或塑料軟管和軟管組件 規范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) |
| prEN 10285 | 岸上和海上管路用鋼管及配件 外部三層噴涂聚乙烯底化 | Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coatings |
| prEN 10286 | 岸上和海上管路用鋼管及配件 外表三層噴涂聚丙烯底化 | Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings |
| prEN ISO 14924 | 熱噴涂 熱噴涂層的后處理及終飾 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO/DIS 14924:2002) |
| prEN ISO 17834 | 熱噴涂 高溫時防腐蝕及防氧化的保護涂料 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO/FDIS 17834:2003) |
| prEN ISO 17836 | 熱噴涂沉積效率的測定 | Determination of the deposition efficiency for thermal spaying (ISO/DIS 17836:2002) |
| 編號 | 中文名稱 | 英文名稱 |