微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 1268-2 | 纖維增強塑料 試驗板的制備方法 第2部分：接觸和噴涂壓塑法 | Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding |
| ISO 14231 | 熱噴涂 熱噴涂設備的驗收檢查 | Thermal spraying - Acceptance inspection of thermal spraying equipment |
| ISO 14232 | 熱噴涂 粉末 成分和交貨技術條件 | Thermal spraying - Powders - Composition and technical supply conditions |
| ISO 14916 | 熱噴涂 抗拉結合強度的測定 | Thermal spraying - Determination of tensile adhesive strength |
| ISO 14917 | 熱噴涂 術語、分類 | Thermal spraying - Terminology, classification |
| ISO 14918 | 熱噴涂 熱噴涂人員的資格考查 | Thermal spraying - Approval testing of thermal sprayers |
| ISO 14919 | 熱噴涂 火焰和弧光噴涂用金屬線、金屬棒和金屬纜 分類 交貨技術條件 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions |
| ISO 14920 | 熱噴涂 自熔合金的噴涂及重熔 | Thermal spraying - Spraying and fusing of self-fluxing alloys |
| ISO 14921 | 熱噴涂 加工部件中使用熱噴涂覆蓋物的程序 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components |
| ISO 14922-1 | 熱噴涂 熱噴涂結構的質量要求 第1部分:選擇和應用指南 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use |
| ISO 14922-2 | 熱噴涂 熱噴涂結構的質量要求 第2部分:全面質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements |
| ISO 14922-3 | 熱噴涂 熱噴涂結構的質量要求 第3部分:標準質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements |
| ISO 14922-4 | 熱噴涂 熱噴涂結構的質量要求 第4部分:基本質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements |
| ISO 14923 | 熱噴涂.熱噴涂層的表征和試驗 | Thermal spraying - Characterization and testing of thermally sprayed coatings |
| ISO 14924 | 熱噴涂.熱噴涂層的后處理和加工 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings |
| ISO 17834 | 熱噴涂.高溫下抗腐蝕耐氧化保護涂層 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures |
| ISO 17836 | 熱噴涂.熱噴涂熔敷效率的測定 | Thermal spraying - Determination of the deposition efficiency for thermal spraying |
| ISO 20182 | 耐火試樣制備.用氣壓調節混合型槍噴涂耐火板 | Refractory test piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns |
| ISO 8028 | 真空噴涂漆用橡膠和/或塑料軟管和軟管組件 規范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification |
| ISO 8873-1 | 硬質泡沫塑料.用于熱絕緣的噴涂聚氨酯泡沫塑料.第1部分:材料規范 | Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 1: Material specifications |
| ISO 8873-2 | 硬質泡沫塑料.隔熱噴涂的聚氨酯泡沫塑料.第2部分:應用 | Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 2: Application |
| ISO 8873-3 | 硬質泡沫塑料.隔熱噴涂的聚氨酯泡沫塑料.第3部分:試驗方法 | Rigid cellular plastics - Spray-applied polyurethane foam for thermal insulation - Part 3: Test methods |
| 編號 | 中文名稱 | 英文名稱 |