微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS A1436 | 充分粘結在基質上的涂層和片層的脫落能力的試驗方法 | Test methods for movement capability of coatings and sheets fully adhered on substrate |
| JIS A1902-3 | 建筑產品用揮發性有機化合物和醛的排放測定.取樣、試樣制備和試驗條件.第3部分:涂料和涂層材料 | Determination of the emission of volatile organic compounds and aldehydes for building products -- Sampling, preparation of test specimens and testing condition -- Part 3: Paints and coating materials |
| JIS A6021 | 建筑物防水薄膜涂層用液態使用的化合物 建築用塗膜防水材 | Liquid-applied compounds for waterproofing membrane coating of buildings |
| JIS A6021 AMD 1 | 建筑物防水薄膜涂層用液態使用的化合物（修改件1） 建築用塗膜防水材（追補１） | Liquid-applied compounds for waterproofing membrane coating of buildings (Amendment 1) |
| JIS A6111 | 房屋用涂層板 透濕防水シート | House wrapping sheets |
| JIS A6909 | 建筑物紋理精整用涂層材料 建築用仕上塗材 | Coating materials for textured finishes of buildings |
| JIS A6909 AMD 1 | 建筑物紋理精整用涂層材料（修改件1） 建築用仕上塗材（追補１） | Coating materials for textured finishes of buildings (Amendment 1) |
| JIS C8380 | 電纜溝道用塑料涂層鋼管 ケーブル保護用合成樹脂被覆鋼管 | Plastic coated steel pipes for cable-ways |
| JIS G3443-3 | 供水用鍍層鋼管.第3部分:外部塑料涂層 水輸送用塗覆裝鋼管―第３部：外面プラスチック被覆 | Coated steel pipes for water service -- Part 3: External plastic coatings |
| JIS G3443-4 | 供水用鍍層鋼管.第4部分:內部環氧涂層 水輸送用塗覆裝鋼管―第４部：內面エポキシ樹脂塗裝 | Coated steel pipes for water service -- Part 4: Internal epoxy coatings |
| JIS G3536 ERRATUM 1 | 用于預應力混凝土用無涂層的消除應力鋼絲和絞合鋼繩(勘誤 1) | Uncoated stress-relieved steel wires and strands for prestressed concrete (Erratum 1) |
| JIS G5528 | 球墨鑄鐵管道和配件內壁環氧粉末涂層 | Epoxy-powder coating for interior of ductile iron pipes and fittings |
| JIS H8402 | 熱噴涂層張力粘度的試驗方法 | Test methods of tensile adhesive strength for thermal-sprayed coatings |
| JIS H8602 AMD 1 | 鋁及鋁合金的陽極氧化和有機涂層的復合覆層（修改件1） | Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys (Amendment 1) |
| JIS H8602 | 鋁及鋁合金的陽極氧化和有機涂層的復合覆層 | Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys |
| JIS H8641 | 熱浸鍍鋅涂層 | Hot dip galvanized coatings |
| JIS H8667 | 金屬陶瓷噴鍍涂層的試驗方法 | Test methods for cermet sprayed coatings |
| JIS H8680-1 | 鋁和鋁合金陽極氧化涂層厚度的試驗方法.第1部分:顯微鏡法 | Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Microscopical method |
| JIS H8685-1 | 鋁及鋁合金的著色陽極氧化涂層耐光牢度的加速試驗方法.第1部分:耐人工光照色牢度試驗 | Accelerated test methods for light fastness of coloured anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Test for light fastness to artificial light |
| JIS H8686-2 | 鋁和鋁合金陽極氧化涂層顯像清晰度試驗方法.第2部分:儀表法 | Test methods for image clarity of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Instrumental method |
| JIS H9303 | 金屬陶瓷噴鍍涂層的推薦規程 | Recommended practice for cermet sprayed coatings |
| JIS K3151 | 為確保涂料、清漆和相關涂層良好的粘著性采用磷酸鹽轉化涂層的推薦標準 | Recommendations for phosphate conversion coatings to ensure good adhesion of paints, varnishes and related coatings |
| JIS K5500 | 涂層材料術語匯編 | Glossary of terms for coating materials |
| JIS K5600-5-4 ERRATUM 1 | 涂料的試驗方法.第5部分:涂層膜的機械特性.第4節:刮痕硬度(鉛筆方法)(勘誤 1) | Testing methods for paints -- Part 5: Mechanical property of film -- Section 4: Scratch hardness (Pencil method) (Erratum 1) |
| JIS K5600-8-1 ERRATUM 1 | 涂料試驗方法.第8部分:涂層老化評估.第1節:一般原則和額定值表(勘誤1) | Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 1: General principles and rating schemes (Erratum 1) |
| JIS K5600-8-2 ERRATUM 1 | 涂料試驗方法.第8部分:涂層老化評估.第2節:起泡程度標識(勘誤1) | Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 2: Designation of degree of blistering (Erratum 1) |
| JIS K5600-8-4 ERRATUM 1 | 涂料試驗方法.第8部分:涂層老化評估.第4節:開裂程度標識(勘誤1) | Testing methods for paints -- Part 8: Evaluation of degradation of paint coatings -- Section 4: Designation of degree of cracking (Erratum 1) |
| JIS K5970 | 室內地板涂層 | Interior floor coating |
| JIS K6404-2-2 | 橡膠或塑料涂層織物的測試方法.整卷特性測定.第2部分:單位面積總質量、單位面積涂層量和襯底單位面積質量的 | Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrate |
| JIS K6404-2-3 | 橡膠或塑料涂層織物的測試方法.整卷特性測定.第3部分:厚度的測定方法 | Testing methods for rubber-or plastics-coated fabrics -- Determination of roll characteristics -- Part 3: Method for determination of thickness |
| JIS K6744-1992 AMENDMENT:2007 | 聚氯乙烯涂層和層壓金屬板 ポリ塩化ビニル被覆金屬板 | Polyvinyl chloride coated and laminated metal sheets |
| JIS K6744 | ポリ塩化ビニル被覆金屬板（追補１） | Polyvinyl chloride coated and laminated metal sheets (Amendment 1) |
| JIS K6772 | 聚氯乙烯涂層織物 ビニルレザークロス | Polyvinylchloride coated fabric |
| JIS K6894 | 金屬基片的氟塑料涂層膜 | Fluoroplastic coating film on metal substrate |
| JIS M8016 | 紙張?zhí)盍虾屯繉拥脑囼灧椒? | Testing methods of filler and coating clay for paper |
| JIS Z1514 | 聚乙烯涂層紙 | Polyethylene coated paper |
| JIS Z1528 | 雙面涂層的壓敏膠帶 両面粘著テープ | Pressure sensitive adhesive double coated tapes |
| JIS Z1541 | 高位差壓敏雙面涂層膠粘帶 | High potential pressure sensitive adhesive double coated tapes |
| JIS Z1708 | 可噴涂、可剝塑料防護涂層 | Sprayable and strippable protective plastic coatings |
| 編號 | 中文名稱 | 英文名稱 |