微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 18366 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).墻和天花板裝飾涂層的應用 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Application of decorative coverings on walls and ceilings |
| DIN 18556 | 合成樹脂灰漿涂層材料和合成樹脂灰漿的檢驗 | Testing of coating material for synthetic resin plasters and of synthetic resin plasters |
| DIN 19306-2 | 紙.印刷紙.第2部分:白色涂層和無涂層膠版印刷紙的交貨技術規范 | Paper - Printing paper - Part 2: Technical delivery specifications for offset-paper, coated and uncoated, white |
| DIN 19307 | 紙和紙板.無涂層辦公用紙.要求和試驗 | Paper and board - Office paper, uncoated - Requirements, test methods |
| DIN 22100-6 | 地下礦井用合成器材和材料.薄板、涂層和非涂層織物.隔板材料和墊板.安全要求.檢驗.標識 | Articles and materials from synthetic for use in underground mines; sheeting, coated/uncoated tissue, brattice materials and lagging mats; safety requirements, testing, marking |
| DIN 22115 | 地下煤礦開采用帶式輸送機.托輥的涂層.要求和檢驗 | Belt conveyors for underground coalmining - Coating on idlers - Requirements and testing |
| DIN 28052-5 | 化工設備.工藝技術設備中混凝土構件非金屬材料表面處理.第5部分:合成涂層 | Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings |
| DIN 28125-3 | 具有保護環和表面涂層的圓形絞鏈式閘板.第3部分:額定直徑 DN 500 和 DN 600 | Hinged covers; circular shape with protection ring and surface coated; DN 500 and DN 600 |
| DIN 29597 | 航空航天.液體涂層材料的應用 | Aerospace - Application of liquid coating materials |
| DIN 29970 | 航空航天.酚醛樹脂涂層的聚酰胺紙制蜂窩芯.技術規范 | Aerospace - Honeycomb cores of polyamide paper, phenolic resin coated - Technical specification |
| DIN 30672 | 持續工作溫度不超過50℃的地下和水下管道外部有機防腐涂層.帶材和可收縮材料 | External organic coatings for the corrosion protection of buried and immersed pipelines for continuous operating temperatures up to 50 °C - Tapes and shrinkable materials |
| DIN 30674-2 | 球墨鑄鐵管用水泥砂漿涂層.要求和檢驗 | Cement mortar coatings for ductile iron pipes; requirements and testing |
| DIN 30677-1 | 埋設管道的腐蝕保護.第1部分:公稱要求的涂層 | Corrosion protection of burried valves; coating for normal requirement |
| DIN 30677-2 | 埋設管件的外部防腐處理.第2部分:加厚式熱固性塑料涂層 | External corrosion protection of buried valves; heavy-duty thermoset plastics coatings |
| DIN 30678 | 鋼管的聚丙烯涂層 | Polypropylene coatings for steel pipes |
| DIN 4681-3 | 地下安裝用鋼制固定點增壓式液化氣儲罐.第3部分:具有抗化學和機械侵蝕特殊性能的外部防腐涂層 | Steel fixed site pressurized LPG tanks for underground installation; exterior corrosion protecting coating with special performance against chemical and mechanical attacks |
| DIN 4753-10 | 飲用水和服務性用水的熱水器和水加熱裝置.第10部分:無涂層的鋼容器陰極的防腐要求和檢驗 | Water heating installations for drinking water and service water; cathodic corrosion protection of uncoated steel vessels; requirements and testing |
| DIN 4753-4 | 飲用水和服務性用水的熱水器和水加熱裝置.第4部分:采用高溫固化的硬塑料涂層材料作觸水面的防腐保護.要求和 | Water heaters and water heating installations for drinking water and service water - Part 4: Corrosion protection on the water side by means of hot-setting, duroplastic coating materials; requirements and testing |
| DIN 4753-5 | 飲用水和服務性用水的熱水器和水加熱裝置.第5部分:采用天然或合成橡膠制成的箔片涂層作觸水面的防腐保護.要 | Water heaters and water heating installations for drinking water and service water - Part 5: Corrosion protection on the water side by means of foil coating made from natural or synthetic rubber; requirements and testing |
| DIN 4945-1 | 抽水用帶抗拉套管的出水豎管.第1部分：DN 50至 DN 200的塑料涂層鋼管 | Rising pipes with tension proof socket for water raising - Part 1: Steel pipes DN 50 to DN 200, plastic coated |
| DIN 50022 | 金屬和其它無機涂層.多層鎳鍍層中單層的同步厚度和電極電勢測定(STEP試驗) | Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP Test) |
| DIN 50453-2 | 半導體工藝材料的檢驗.蝕刻混合劑浸蝕率的測定.第2部分:二氧化硅涂層.光學法 | Testing of materials for semiconductor technology; determination of etch rates of etching mixtures; silicium-dioxid coating; optical method |
| DIN 50455-1 | 半導體工藝材料的檢驗.表示光致抗蝕劑特性的方法.第1部分:用光學測量法對涂層厚度的測定 | Testing of materials for semiconductor technology; methods for characterizing photoresists; determination of coating thickness with optical methods |
| DIN 50903 | 金屬涂層.氣孔，夾雜，氣泡與裂紋.定義 | Metallic Coatings; Pores, Inclusions, Blisters and Cracks, Definitions |
| DIN 50923 | 電鍍層.鐵或鋼上帶有機涂層的鋅或鋅合金涂層的雙涂層 | Electroplated coatings - Duplex coatings of zinc or zinc alloy coatings with organic coatings on iron or steel |
| DIN 50928 | 金屬腐蝕.對與含水腐蝕劑接觸的涂層金屬材料防腐檢驗和評定 | Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents |
| DIN 50933 | 涂層厚度測量.使用觸針儀器以差動測量法測量涂層厚度 | Measurement of coating thickness by differential measurement using a stylus instrument |
| DIN 50938 | 鐵和鋼的黑色氧化涂層.要求和試驗方法 | Black oxide coatings on iron or steel - Requirements and test methods |
| DIN 50960-2 | 電鍍涂層.第2部分:技術圖紙的說明 | Electroplated coatings - Part 2: Indications on technical drawings |
| DIN 50962 | 電鍍涂層.鐵和鋼件上鋅合金鉻酸鈍化涂層 | Electrodeposited coatings - Chromated coatings of zinc alloys on iron and steel |
| DIN 50986 | 涂層厚度的測量.測量涂層及類似的涂覆層厚度的楔式切割法 | Measurement of coating thickness; Wedge cut method for measuring the thickness of paints and related coatings |
| DIN 50988-2 | 涂層厚度測量.用涂層材料溶解作用測量鐵素體材料上涂層的單位面積鋅和錫的重量.容量分析法 | Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method |
| DIN 50990 | 涂層厚讀的測量.用原子吸收光譜法測量金屬鍍層單位面積的質量 | Measurement of coating thickness; determination of the mass per unit area of metallic coatings by atomic absorption spectrometric method; flame method, F AAS |
| DIN 50991 | 電解涂層.鍍鉻槽三氧化鉻.要求和試驗 | Electroplated coatings - Chromtrioxide for chromium baths - Requirements and testing |
| DIN 52006-1 | 瀝青和瀝青粘合劑.水對粘合劑涂層作用的測定試驗方法.第1部分:乳化瀝青粘合劑涂層 | Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 1: Bitumen emulsion binder coating |
| DIN 52006-2 | 瀝青和瀝青粘合劑.水對粘合劑涂層作用的測定試驗方法.第2部分:石油輕制粘合劑涂層 | Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 2: Petroleum cutback binder coating |
| DIN 52006-3 | 瀝青和瀝青粘合劑.水對粘合劑涂層作用的測定試驗方法.第3部分:軟制瀝青粘合劑涂層 | Bitumen and bituminous binders - Test methods for the determination of the effect of water on binder coatings - Part 3: Fluxed bitumen binder coating |
| DIN 52452-4 | 建筑結構用密封材料的檢驗.密封材料的兼容性.與其他防護涂層材料的可混用性 | Testing of sealing compounds in building constructions; compatibility of sealing products; compatibility with other protection coatings |
| DIN 53100 | 金屬凃?qū)?塑料材料上鎳鉻的電鍍涂層和銅鎳鉻的電鍍涂層 | Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials |
| DIN 53150 | 涂料和清漆.涂層干燥度的測定(修訂的Bandow-Wolff方法) | Paints and varnishes - Determination of the drying stage of coatings (modified Bandow-Wolff method) |
| DIN 53154 | 色漆、清漆和類似的涂覆材料的檢驗.對涂層和類似涂層進行的落球面試驗 | Testing of paints, varnishes and similar coating materials; falling ball test on paint coatings and similar coatings |
| DIN 53159 | 油漆和清漆.用KEMPF法測定漆料涂層的白堊度 | Paints and varnishes - Determination of the degree of chalking of paint coatings by the Kempf method |
| DIN 53174-2 | 漆及類似涂層材料用溶劑.溶劑混合物的分析方法.氣相色譜分析法 | Solvents for paints, varnishes and similar coating materials; methods of analysis for solvent mixtures; gas chromatographic method |
| DIN 53215 | 瀝青和瀝青粘合劑.瀝青涂層材料中不揮發物質含量的測定. | Bitumen and bituminous binders - Determination of the non-volatile matter content of bituminous coating materials |
| DIN 53229 | 油漆、清漆和類似涂層材料.用旋轉式粘度計測定在剪切率下的粘度 | Paints, varnishes and similar coating materials; determination of viscosity at high shear rates using rotational viscometers |
| DIN 53236 | 著色劑的檢驗.測定色漆涂敷層、類似涂層和塑料色差的測量和評價條件 | Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics |
| DIN 53350 | 用塑料制造的塑料薄膜和涂層的紡織織物的檢驗.用Ohlsen法測定彎曲剛度 | Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending, method according to Ohlsen |
| DIN 53362 | 帶或不帶涂層織物的塑料薄膜和紡織物(無紡織物除外)的試驗.抗彎強度的測定.懸臂式試驗法 | Testing of plastics films and textile fabrics (excluding nonwovens), coated or not coated fabrics - Determination of stiffness in bending - Method according to Cantilever |
| DIN 53528 | 橡膠涂層的紡織物的試驗.耐磨試驗.用Frank-Hauser儀進行的質量損失測定 | Testing of rubber-coated textiles; abrasion test; determination of loss in mass by the Frank Hauser apparatus |
| DIN 53781 | 涂層材料.核設備涂層抗電離輻射試驗方法 | Coating materials - Methods for testing the resistance of coatings to ionizing radiation in nuclear plants |
| DIN 55607 | 顏料和填充劑.施用后粉末涂層中填充劑的分散及其比色評估 | Pigments and extenders - Dispersion of pigments in powder coatings and their colorimetric evaluation after application |
| DIN 55664 | 涂料和清漆.涂層缺陷的目視評估 | Paints and varnishes - Visual assessment of coating defects |
| DIN 55665 | 涂料和清漆.涂層的自然風化.防腐蝕性能的測定 | Paints and varnishes - Natural weathering of coatings - Determination of corrosion protection performance |
| DIN 55666 | 涂層材料、三聚氰胺泡沫材料和紡織物甲醛排放檢驗.在小型試驗室內對甲醛均衡化濃度的測定 | Testing of formaldehyde-emitting coating materials, melamin foams and textiles - Determination of the equalization concentration of formaldehyde in a small test chamber |
| DIN 55670 | 油漆和清漆.用高電壓對油漆涂層和類似涂層進行氣孔和裂紋試驗 | Paints and varnishes; method for testing paint coatings and similar coatings for pores and cracks, using high-voltage |
| DIN 55682 | 色漆和清漆溶劑.在水里可以稀釋的涂層材料中的溶劑測定.氣相色譜法 | Solvents for paints and varnishes - Determination of solvents in waterthinnable coating materials - Gas chromatographic method |
| DIN 55683 | 顏料和清漆用溶劑.只含有機溶劑的涂層材料溶劑的測定.氣相色譜分析法 | Solvents for paints and varnishes - Determination of the solvents in coating materials containing organic solvents only - Gaschromatographic method |
| DIN 55900-1 | 散熱器的涂層.第1部分:底層涂料和工業用底漆的術語、要求和試驗 | Coatings for radiators - Part 1: Terms, requirements and tests for primers and industrially applied priming coats |
| DIN 55900-2 | 散熱器的涂層.第2部分:精制漆和工業用精制漆的術語、要求和試驗 | Coatings for radiators - Part 2: Terms, requirements and tests for finishing paints and industrially applied finishing coats |
| DIN 55991-1 | 涂層材料.核設施涂層.第1部分:要求和試驗方法 | Coating materials - Coatings for nuclear facilities - Part 1: Requirements and test methods |
| DIN 55991-2 | 涂料.核設施用涂層.涂層材料的鑒定檢驗 | Coating materials; coatings for nuclear facilities; identity testing of coating materials |
| DIN 55991-3 | 涂料.核設施涂層.第3部分:涂覆作業、計劃和程序 | Coating materials - Coatings in nuclear facilities - Part 3: Coating work, planning and procedure |
| DIN 55996-3 | 涂料和清漆.涂層耐石頭劃的試驗.第3部分:帶自由飛行沖擊體的單一沖擊試驗 | Paints and varnishes - Stone chip resistance test for coatings - Part 3: Single impact test with free flying impact body |
| DIN 58196-5 | 光學涂層.第5部分:用布進行耐磨性試驗 | Optical coatings - Part 5: Testing of the abrasion resistance with cloth |
| DIN 58196-6 | 光學涂層.第6部分:用膠帶作粘附力的檢驗(膠帶試驗法) | Optical coatings - Part 6: Testing of the adhesion with a tape (tape test) |
| DIN 58197-1 | 光學涂層.第1部分:抗反射涂層的最低要求 | Optical coatings - Part 1: Minimum requirements for antireflection coatings |
| DIN 58197-2 | 光學涂層.第2部分:反射鏡涂層的最低要求 | Optical coatings - Part 2: Minimum requirements for mirror coatings |
| DIN 58197-4 | 光學涂層.第4部分:激光光學用涂層的最低要求 | Optical coatings - Part 4: Minimum requirements for coatings used for laser optics |
| DIN 65046-2 | 航空航天. 表面保護涂層的試驗方法.油漆和清漆.第2部分:試樣.試樣的制備和干燥 | Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 2: Specimens, preparation of specimens, drying |
| DIN 65046-3 | 航空航天.表面保護涂層的試驗方法.油漆和清漆.第3部分:按交貨條件進行的試驗 | Aerospace - Methods of test for surface protective coatings; paints and varnishes - Part 3: Tests in as-delivered condition |
| DIN 65046-4 | 航空航天.表面保護涂層的試驗方法.尤其和清漆.第4部分:涂層試驗 | Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 4: Testing of coatings |
| DIN 65046-5 | 航空航天.表面保護涂層的試驗方法.油漆和清漆.第5部分:涂層阻力試驗 | Aerospace - Methods of test for surface protective coatings; paints, varnishes - Part 5: Coating resistance tests |
| DIN 65099-6 | 航空和航天.專用工藝設施的分類.E類工藝.涂層 | Aerospace; classification of special workshop facilities; process group E; coating |
| DIN 65183 | 航空航天.為測定有機涂層耐侵蝕性能進行的雨水試驗 | Aerospace; rain testing of organic coatings for the determination of the resistance to erosion |
| DIN 65591 | 航空航天.非涂層的寬幅織物.技術規范 | Aerospace - Broad woven fabric, uncoated - Technical specification |
| DIN 6723-1 | 數據處理用紙.文件分類閱讀機用90克/平方米紙.第1部分:無覆面無涂層.要求和試驗要求 | Papers for data processing - Paper for document reader sorter 90-g/m<(hoch)2>-substance - Part 1: Uncoated, untreated; requirements, test requirements |
| DIN 6723-2 | 數據處理用紙.文件分類閱讀機用90克/平方米紙.第1部分:帶覆面帶涂層自復寫.要求和試驗方法 | Papers for data processing - Paper for document reader sorter 90-g/m<(hoch)2>-substance - Part 2: Coated, treated, self copying; requirements, test method |
| DIN 6724-1 | 數據處理紙.文件分類閱讀機用65-85克/平方米紙.第1部分:無覆面無涂層.要求、試驗 | Papers for data processing - Paper for document reader sorter 65- to 85-g/m<(hoch)2>-substance - Part 1: Uncoated, untreated; requirements, test method |
| DIN 6724-2 | 數據處理紙.文件分類閱讀機用65-85克/平方米紙.第2部分:帶覆面帶涂層自復寫.要求、試驗 | Papers for data processing - Paper for document reader sorter 65- to 85-g/m<(hoch)2>-substance - Part 2: coated, treated, self copying; requirements, test method |
| DIN 7868-3 | 橡膠和塑料涂層輥子.第3部分:尺寸公差和形位公差 | Rubber and plastics covered rollers; dimensional and geometrical tolerances |
| DIN 80200 | 造船用鋼制部件.表面預處理、預涂底漆和底漆涂層用符號 | Steel components for shipbuilding - Symbols used for surface preparations, shop primers and priming coats |
| DIN 8541-3 | 焊接、切割和相關工藝用橡膠軟管.第3部分:特殊要求用有涂層和無涂層的氧化橡膠軟管.安全要求和檢驗 | Rubber hoses for welding, cutting and allied processes - Part 3: Oxygen rubber hoses with and without coatings for special requirements; safety requirements and testing |
| DIN CEN/TS 1071-10 | 高級工業陶瓷.陶瓷涂層的試驗方法.第10部分:由橫切法測定涂層厚度 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning; German version CEN/TS 1071-10:2004 |
| DIN CEN/TS 1071-11 | 高級工業陶瓷.陶瓷涂層的試驗方法.第11部分:用Stoney公式測定內壓 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula; German version CEN/TS 1071-11:2005 |
| DIN CEN/TS 1071-7 | 高級工業陶瓷.陶瓷涂層的試驗方法.第7部分:通過裝有測量儀器的壓痕試驗測定硬度和楊氏模量 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 7: Determination of hardness and Young's modulus by instrumented indentation testing; German version CEN/TS 1071-7:2003 |
| DIN CEN/TS 1071-8 | 高級工業陶瓷.陶瓷涂層的試驗方法.第8部分:粘性評價的洛氏亞痕試驗 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 8: Rockwell indentation test for evaluation of adhesion; German version CEN/TS 1071-8:2004 |
| DIN CEN/TS 1071-9 | 高級工業陶瓷.陶瓷涂層的試驗方法.第9部分:斷裂應變的測定 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain; German version CEN/TS 1071-9:2004 |
| DIN CEN/TS 14234 | 接觸食品的材料和制品.紙和紙板的聚合涂層.總遷移的條件和試驗方法的選擇指南 | Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14234:2002 |
| DIN CEN/TS 14235 | 接觸食品的材料和制品.金屬基片的聚合涂層.全遷移條件和試驗方法的選擇指南; 德文版本 CEN/TS 14235:2002 | Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration; German version CEN/TS 14235:2002 |
| DIN EN 10051 | 無涂層連續熱軋非合金和合金鋼板材、薄板材和帶材.尺寸和外形公差 (包括修改件 A1:1997); 德文版本 EN 1005 | Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances of dimensions and shape (includes Amendment A1:1997); German version EN 10051:1991 + A1:1997 |
| DIN EN 10139 | 冷成形加工用無涂層低碳鋼冷軋窄帶材.技術交貨條件 | Cold rolled uncoated mild steel narrow steel strip for cold forming - Technical delivery conditions; German version EN 10139:1997 |
| DIN EN 10202 | 冷軋錫產品.電解錫板和電解鉻/氧化鉻涂層鋼 | Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; German version EN 10202:2001 |
| DIN EN 10223-1 | 柵欄用鋼絲和鋼絲制品.第1部分:鋅和鋅合金涂層的帶刺鋼絲 | Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire; German version EN 10223-1:1997 |
| DIN EN 10240 | 鋼管的內部和/或外部防護涂層.自動裝置的熱浸鍍鋅涂層規范 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997 |
| DIN EN 10244-1 | 鋼絲和鋼絲產品.鋼絲有色金屬涂層.第1部分:一般規則 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; German version EN 10244-1:2001 |
| DIN EN 10244-2 | 鋼絲和鋼絲產品.鋼絲有色金屬涂層.第2部分:鋅和鋅合金涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; German version EN 10244-2:2001 |
| DIN EN 10244-3 | 鋼絲和鋼絲產品.鋼絲有色金屬涂層.第3部分:鋁涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; German version EN 10244-3:2001 |
| DIN EN 10244-4 | 鋼絲和鋼絲產品.鋼絲有色金屬涂層.第4部分:錫涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; German version EN 10244-4:2001 |
| DIN EN 10244-5 | 鋼絲和鋼絲產品.鋼絲有色金屬涂層.第5部分:鎳涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; German version EN 10244-5:2001 |
| DIN EN 10244-6 | 鋼絲和鋼絲產品.鋼絲有色金屬涂層.第6部分:銅、青銅和黃銅涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; German version EN 10244-6:2001 |
| DIN EN 10245-1 | 鋼絲和鋼絲產品.鋼絲有機涂層.第1部分:一般規則 | Steel wire and wire products - Organic coatings on wire - Part 1: General rules; German version EN 10245-1:2001 |
| DIN EN 10245-2 | 鋼絲和鋼絲產品.鋼絲有機涂層.第2部分:PVC 涂層絲 | Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; German version EN 10245-2:2001 |
| DIN EN 10245-3 | 鋼絲和鋼絲產品.鋼絲有機涂層.第3部分:聚乙烯(PE)涂層絲 | Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; German version EN 10245-3:2001 |
| DIN EN 10245-4 | 鋼絲和鋼絲產品.鋼絲上的有機涂層.第4部分:聚酯涂層絲 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2003 |
| DIN EN 10257-1 | 鎧裝電力和通信電纜用鋅或鋅合金涂層的低碳鋼絲.第1部分:陸地鋪設的電纜 | Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 1: Land cables; German version EN 10257-1:1998 |
| DIN EN 10257-2 | 鎧裝電力和通信電纜用鋅或鋅合金涂層的低碳鋼絲.第2部分:海底鋪設電纜 | Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 2: Submarine cables; German version EN 10257-2:1998 |
| DIN EN 10271 | 電解分離鋅-鎳(ZN)涂層的平板鋼制品.交貨技術條件 | Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions; German version EN 10271:1998 |
| DIN EN 10288 | 岸上和近海管線用鋼管及配件.外部雙層擠壓聚乙烯基涂層 | Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings; German version EN 10288:2002 |
| DIN EN 10300 | 近岸和海上管線用鋼管和配件.外涂層用瀝青熱涂覆材料.德文版本 EN 10300 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating; German version EN 10300:2005 |
| DIN EN 10301 | 海上和近海管道用鋼管和配件.降低無腐蝕氣體運輸摩擦的內涂層 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas; German version EN 10301:2003 |
| DIN EN 10310 | 近海和海上管道用鋼管和配件.內外部聚酰胺粉末基涂層 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings; German version EN 10310:2003 |
| DIN EN 10318 | 鋅和鋁基金屬涂層的厚度和化學成分的測定.常規法 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005 |
| DIN EN 10329 | 岸上和海上管道用鋼管和配件.外部連接涂層;德文版本EN 10329 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings; German version EN 10329:2006 |
| DIN EN 1062-1 | 色漆和清漆.外部磚石和混凝土用涂層材料和涂層系統.第1部分:分類 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification; German version EN 1062-1:2004 |
| DIN EN 1062-3 | 油漆和清漆.外部砌磚體和混凝土用涂層材料和涂層系統.第3部分:液體－水傳輸(滲透)率的測定和分類 | Paints and varnishes - Coating materials and coating system for exterior masonry and concrete - Part 3: Determination and classification of liquid-water transmission rate (permeability); German version EN 1062-3:1998 |
| DIN EN 1062-6 | 涂料和清漆.外墻磚石和混凝土用涂層材料和涂覆系統.第6部分:二氧化碳滲透性測定 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability; German version EN 1062-6:2002 |
| DIN EN 1062-7 | 清漆和涂料.外部磚石和混凝土用涂層材料和涂層系統.第7部分:裂縫遮避性能的測定 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties; German version EN 1062-7:2004 |
| DIN EN 1071-4 | 高級工業陶瓷.陶瓷涂層的試驗方法.第4部分:使用電探針微量分析(EPMA)測量化學成分 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) English version of DIN EN 1071-4:2006-05 |
| DIN EN 1096-1 | 建筑業玻璃.涂層玻璃.第1部分:定義和分率 | Glass in building - Coated glass - Part 1: Definitions and classification; German version EN 1096-1:1998 |
| DIN EN 1096-2 | 建筑物玻璃.涂層玻璃.第2部分:A、B、S級涂層要求和試驗方法 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings; German version EN 1096-2:2001 |
| DIN EN 1096-3 | 建筑物玻璃.涂層玻璃.第3部分:C、D類涂層的要求和試驗方法 | Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings; German version EN 1096-3:2001 |
| DIN EN 1096-4 | 建筑物用玻璃.涂層玻璃.第4部分:合格評價/產品標準 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard; German version EN 1096-4:2004 |
| DIN EN 12206-1 | 色漆和清漆.建筑用鋁和鋁合金涂層.第1部分:從涂料粉制備的涂層 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder; German version EN 12206-1:2004 |
| DIN EN 12280-2 | 橡膠和塑料涂層織物.加速老化試驗.第2部分:光和風化作用的物理老化; 德文版本 EN 12280-2:2001 | Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering; German version EN 12280-2:2001 |
| DIN EN 12280-3 | 橡膠或塑料涂層織物.加速老化試驗.第3部分:環境老化; 德文版本 EN 12280-3:2002 | Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002 |
| DIN EN 12332-1 | 橡膠或塑料涂層的紡織物.破裂強度的測定.第1部分:鋼球法 | Rubber or plastic coated fabrics - Determination of bursting strength - Part 1: Steel ball method; German version EN 12332-1:1998 |
| DIN EN 12332-2 | 橡膠或塑料涂層織物.破裂強度測定.第2部分:液壓法 | Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method; German version EN 12332-2:2002 |
| DIN EN 12373-10 | 鋁和鋁合金.陽極處理.第10部分:用噴砂試驗測量陽極化氧化涂層的特定平均耐磨性能 | Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998 |
| DIN EN 12373-2 | 鋁和鋁合金.陽極處理.第2部分:陽極處理氧化涂層單位面積質量(與面積相關的質量)的測定.重力法 | Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass par unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998 |
| DIN EN 12373-3 | 鋁和鋁合金.陽極處理.第3部分:陽極的氧化涂層厚度的測定.用裂隙梁顯微鏡進行無損測量 | Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings; non-destructive measurement by split-beam-microscope; German version EN 12373-3:1998 |
| DIN EN 12373-4 | 鋁和鋁合金.陽極處理.第4部分:采用在酸處理之前用著色點滴試驗密封后陽極化氧化涂層的吸收力損失量的估計 | Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998 |
| DIN EN 12373-5 | 鋁和鋁合金.陽極處理.第5部分:用測量公差方法對密封的陽極處理氧化涂層進行質量評定 | Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998 |
| DIN EN 12373-6 | 鋁和鋁合金.陽極處理.第6部分:在預先未進行酸處理情況下涂層在鉻酸/磷酸溶液中浸漬以后通過測定質量損耗對 | Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 12373-6:1998 |
| DIN EN 12373-7 | 鋁及鋁合金.陽極氧化.第7部分:通過磷酸和鉻酸溶液浸漬酸處理后測量質量損失評估密封陽極氧化涂層的質量; 德 | Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373-7:2002 |
| DIN EN 12373-8 | 鋁和鋁合金.陽極處理.第8部分:著色陽極氧化處理氧化涂層的耐紫外線和熱影響比較牢度的測定 | Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings; German version EN 12373-8:1998 |
| DIN EN 12373-9 | 鋁和鋁合金.陽極化處理.第9部分:用砂輪磨損試驗測量陽極處理氧化涂層的耐磨損性和磨損指數 | Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998 |
| DIN EN 1244 | 膠粘劑.在光線作用下粘接涂層的顏色和/或顏色變化的測定 | Adhesives - Determination of the colour and/or colour changes of adhesives coats under the influence of light; German version EN 1244:1998 |
| DIN EN 12472 | 對涂層零部件上脫離的鎳進行檢測時使用的磨損和腐蝕模擬試驗方法 | Method for the simulation of wear and corrosion for the detection of nickel release from coated items; German version EN 12472:2005 |
| DIN EN 12476 | 金屬的磷酸鹽轉化涂層.規定要求的方法 | Phosphate conversion coatings of metals - Method of specifying requirements; German version EN 12476:2000 |
| DIN EN 12487 | 金屬的腐蝕防護.鋁和鋁合金上經清洗和未清洗的鉻酸鹽轉化涂層 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; German version EN 12487:2007 |
| DIN EN 12508 | 金屬和合金的腐蝕防護.金屬和其它非有機涂層的表面處理.詞匯 | Corrosion protection of metals and alloys - Surface treatment, metallic and other non-organic coatings - Vocabulary; German version EN 12508:2000 |
| DIN EN 12581 | 涂料.有機液體涂層材料的浸涂和電沉積用機械.安全要求.德文版本 EN 12581 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements; German version EN 12581:2005 |
| DIN EN 12621 | 壓力下涂層材料的供應和循環用機器.安全性要求 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements English version of DIN EN 12621:2006-05 |
| DIN EN 12629-5-4 | 生產混凝土和硅酸鹽建筑產品用機器.安全.第5-4部分:混凝土管道涂層機械 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003 |
| DIN EN 12757-1 | 涂層材料用攪拌機械.安全要求.第1部分:車輛表面整修用的攪拌機械 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing; German version EN 12757-1:2005 |
| DIN EN 12759 | 橡膠或塑料涂層織物.耐液體性能測定 | Rubber- or plastic-coated fabrics - Determination of resistance to liquids; German version EN 12759:2001 |
| DIN EN 12981 | 涂層設備.噴涂有機粉末涂層材料的噴涂室.安全要求 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements; German version EN 12981:2005 |
| DIN EN 13113 | 制革機.輥筒涂層機.安全要求 | Tannery machines - Roller coating machines - Safety requirements; German version EN 13113:2002 |
| DIN EN 13143 | 金屬和其他無機涂層.孔隙率.孔隙測試的定義和規定 | Metallic and other inorganic coatings - Porosity - Definitions and conventions of the testing of pores; German version EN 13143:2003 |
| DIN EN 13300 | 涂料和清漆.內墻和天花板用水溶涂層材料和涂層系統.分類; 德文版本 EN 13300:2001 + AC:2002 | Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification; German version EN 13300:2001 + AC:2002 |
| DIN EN 13438 Berichtigung 1 | 涂料和清漆.建筑用鍍鋅或鍍鋅粉鋼產品用的粉末有機涂層 | Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; German version EN 13438:2005, Corrigenda to DIN EN 13438:2006-01 |
| DIN EN 13438 | 色漆和清漆.建筑用鍍鋅或粉末鍍鋅鋼產品用的粉末有機涂層 | Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes; German version EN 13438:2005 |
| DIN EN 13494 | 建筑物隔熱產品.隔熱材料基底涂層和粘合劑拉伸連接強度測定 | Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material; German version EN 13494:2002 |
| DIN EN 13523-15 | 卷材涂層金屬.試驗方法.第15部分:位變異構; 德文版本 EN 13523-15:2002 | Coil coated metals - Test methods - Part 15: Metamerism; German version EN 13523-15:2002 |
| DIN EN 13523-18 | 卷材涂層金屬.試驗方法.第18部分:耐染污性; 德文版本 EN 13523-18:2002 | Coil coated metals - Test methods - Part 18: Resistance to staining; German version EN 13523-18:2002 |
| DIN EN 13523-23 | 卷材涂層金屬.試驗方法.第23部分:在含有二氧化硫濕氣環境中的顏色的穩定性; 德文版本 EN 13523-23:2002 | Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide; German version EN 13523-23:2002 |
| DIN EN 13523-6 | 卷材涂層金屬.試驗方法.第6部分:壓痕后的粘合力 (深拉試驗); 德文版本 EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test); German version EN 13523-6:2002 |
| DIN EN 13523-8 | 卷材涂層金屬.試驗方法.第8部分:耐鹽霧性; 德文版本 EN 13523-8:2002 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog); German version EN 13523-8:2002 |
| DIN EN 13603 | 銅和銅合金.電力用拉絲圓形銅導線保護錫涂層評估的試驗方法; 德文版本 EN 13603:2002 | Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes; German version EN 13603:2002 |
| DIN EN 13858 | 金屬的防腐蝕.鐵或鋼部件上非電解鍍鋅薄涂層 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components; English version of DIN EN 13858:2007-02 |
| DIN EN 13920-15 | 鋁和鋁合金.廢料.第15部分:去除涂層的用過的鋁包裝物廢料 | Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings; German version EN 13920-15:2003 |
| DIN EN 13938-6 | 民用爆炸物.推進劑和火箭推進劑.第6部分:固態火箭推進劑.抑制劑涂層完整性測定指南 | Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings; German version EN 13938-6:2004 |
| DIN EN 13966-1 Berichtigung 1 | 液體涂層材料用霧化和噴射設備轉換效率的測定.第1部分:平板 | Determination of the transfer effeciency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels; German version EN 13966-1:2003, Corrigenda to DIN EN 13966-1:2003-09 |
| DIN EN 13966-1 | 液態涂層材料用霧化及噴涂設備輸送效率的測定.第1部分:平板條 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels; German version EN 13966-1:2003 |
| DIN EN 1403 | 金屬防腐蝕.電鍍涂層.規范一般要求的方法 | Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements; German version EN 1403:1998 |
| DIN EN 14099 | 航空航天.航天產品保證.帶壓敏膠粘帶的涂層和裝飾層的剝離和拉脫強度的測量; 德文和英文版本 EN 14099:2001 | Aerospace - Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes with pressure-sensitive tapes; German and English version EN 14099:2001 |
| DIN EN 14135 | 涂層.防火能力的測定 | Coverings - Determination of fire protection ability; German version EN 14135:2004 |
| DIN EN 14431 | 釉和搪瓷.用于建筑鋼板的瓷釉涂層的特性 | Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture; German version EN 14431:2004 |
| DIN EN 14628 | 球墨鑄鐵管、配件和附件.管外層聚乙烯涂層.要求和試驗方法 | Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods; German version EN 14628:2005 |
| DIN EN 14854 | 氣溶膠容器.玻璃容器.瓶頸涂層尺寸.德文版本 EN 14854 | Aerosol containers - Glass containers - Dimensions of the neck finish; German version EN 14854:2005 |
| DIN EN 14879-1 | 工業裝置和設備用防腐蝕劑引起腐蝕的有機涂層系統和襯料.第1部分：襯底的術語、設計和準備.德文版本 EN 148 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate; German version EN 14879-1:2005 |
| DIN EN 14879-2 | 防侵蝕物體引起腐蝕的工業裝置和設備用有機涂層系統和襯料.第2部分:金屬構件涂層 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components; English version of DIN EN 14879-2:2007-02 |
| DIN EN 14879-3 | 防侵蝕物體引起腐蝕的工業裝置和設備用有機涂層系統和襯料.第3部分:混凝土構件涂層 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components; English version of DIN EN 14879-3:2007-02 |
| DIN EN 14879-5 | 防止侵蝕物體腐蝕工業裝置和設備用有機涂層系統和襯料.第5部分:混凝土構件襯料 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components; German version EN 14879-5:2007 |
| DIN EN 14901 | 球墨鑄鐵管、配件和附件.球墨鑄鐵配件及附件的環氧涂層(重載).要求和試驗方法 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods English version of DIN EN 14901:2006-08 |
| DIN EN 15042-1 | 涂層厚度測量和有表面波的表面特性化.第1部分:采用激光感應表面聲波法對各膜層的彈性常數、密度和厚度的測 | Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves English version of DIN EN 15042-1:2006-06 |
| DIN EN 15060 | 色漆和清漆.內部使用的家具的木基材料的涂層系統的分類和選擇指南 | Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use; English version of DIN EN 15060:2006-10 |
| DIN EN 15189 | 球墨鑄鐵管、配件和附件.管道外部聚亞安酯涂層.要求和試驗方法 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods; English version of DIN EN 15189:2007-02 |
| DIN EN 15311 | 熱噴涂.帶熱噴涂涂層的部件.技術提供條件 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions; German version EN 15311:2007 |
| DIN EN 15340 | 熱噴涂.熱噴涂涂層耐剪切負荷的測定 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings; German version EN 15340:2007 |
| DIN EN 15457 | 涂料和清漆.防霉菌涂層中薄膜防腐劑功效的測試用實驗室方法 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi; German version EN 15457:2007 |
| DIN EN 15458 | 涂料和清漆.防藻類涂層中薄膜防腐劑功效的測試用實驗室方法 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae; German version EN 15458:2007 |
| DIN EN 1734 | 帶橡膠和塑料涂層的織物.水密性測定.低壓法 | Rubber- or plastics coated fabrics - Determination of resistance to water penetration - Low pressure method; German version EN 1734:1996 |
| DIN EN 1735 | 帶橡膠和塑料涂層的織物.柔韌性測定 | Rubber- or plastics coated fabrics - Determination of flexibility; German version EN 1735:1996 |
| DIN EN 1816 | 地板彈性鋪覆物.帶泡沫材料涂層的均質和非均質平面地板彈性鋪覆物規范 | Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing; German version EN 1816:1998 |
| DIN EN 1875-3 | 橡膠或塑料涂層的織物.撕裂強度的測定.第3部分:梯形試樣法 | Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method; German version EN 1875-3:1997 |
| DIN EN 1953 | 涂層材料用噴霧器和噴射器.安全性要求 | Atomising and spraying equipment for coating materials - Safety requirements; German version EN 1953:1998 |
| DIN EN 2068 | 航空航天系列.帶關節軸承和自潤滑涂層的吊環端頭.交貨技術條件 | Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996 |
| DIN EN 2437 | 航空航天系列.鋁及鋁合金鉻酸鹽轉化涂層(黃色) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001 |
| DIN EN 2591-508 | 航空航天系列.光電連接元件.試驗方法.第508部分:觸點涂層厚度測量 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 508: Measurement of thickness of coating on contacts; German and English version EN 2591-508:2001 |
| DIN EN 2591-509 | 航空航天系列.光電連接元件.試驗方法.第509部分:觸點涂層附著力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 509: Adhesion of coating on contacts; German and English version EN 2591-509:2001 |
| DIN EN 25978 | 橡膠或塑料涂層織物.抗堵塞性的測定 | Rubber- or plastics-coated fabrics; determination of blocking resistance (ISO 5978:1990); German version EN 25978:1993 |
| DIN EN 28094 | 鋼纜輸送機帶.纜索芯線涂層的粘合強度試驗 | Steel cord conveyor belts; adhesion strength test of the cover to the core layer (ISO 8094:1984); German version EN 28094:1994 |
| DIN EN 2828 | 航空航天.用拋光法試驗金屬涂層的粘附強度 | Aerospace series; adhesion test for metallic coatings by burnishing; german version EN 2828:1993 |
| DIN EN 2829 | 航空航天系列.采用噴丸處理法對金屬涂層進行附著強度試驗; 德文版本 EN 2829:1994 | Aerospace series - Adhesion test for metallic coatings by shot peening; German version EN 2829:1994 |
| DIN EN 2830 | 航空航天.用切剪法試驗金屬涂層的粘附強度 | Aerospace series; adhesion test for metallic coatings by shearing action; german version EN 2830:1993 |
| DIN EN 3720 | 航空航天系列.加 MoS<下標2> 涂層的耐高溫鋼 FE-PA92HT(A286) 自鎖十二角螺母.等級:1100 MPa (室溫)/425℃; | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3720:1995 |
| DIN EN 3721 | 航空航天系列.加 MoS<下標2> 涂層的耐高溫鋼 FE-PA92HT(A286) 深沉孔自鎖十二角螺母.等級:1100 MPa (室溫)/ | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3721:1995 |
| DIN EN 3722 | 航空航天系列.加 MoS<下標2> 涂層的耐高溫鋼FE-PA92HT(A286)自鎖鉚釘體螺母.等級:1100MPa(室溫)/425℃; 德 | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS<(Index)2> coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3722:1995 |
| DIN EN 4312 | 航空和航天系列.鈍化鋁合金涂層耐腐蝕耐熱中長螺紋粗公差遞減柄螺栓.等級:1100MPa(室溫下)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4312:2006 |
| DIN EN 4402 | 航空航天系列.米制有鋁色涂層鈦合金TI-P64001緊公差剪切式100°埋頭標準釘鎖緊螺栓.等級:1100 MPa (常溫)/3 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006 |
| DIN EN 4458 | 航空航天系列.帶耐腐鋼制鋸齒型鎖環的MoS2涂層的TI-P64001型鈦合金制MJ螺紋螺柱.強度分類:1100 MPa（周圍環 | Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1100 MPa (at ambient temperature) - Technical specification; German and English version EN 4458:2005 |
| DIN EN 4495 | 航空和航天系列.鈍化鋁合金涂層陽極電鍍鈦合金短螺紋緊配合標準柄正十二頭螺栓.等級:1100MPa(室溫下)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006 |
| DIN EN 4497 | 帶鋁有色涂層陽極電鍍鈦合金短螺紋緊公差標稱柄偏位十字凹槽平頭螺釘.分類:1100MPa(室溫)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005 |
| DIN EN 4508 | 航空航天系列.涂料和清漆.防滑涂層的試驗方法.滑動摩擦性能的測定 | Aerospace series - Paints and varnishes - Test method for anti slip coatings - Determination of the sliding friction behaviour; German and English version EN 4508:2006 |
| DIN EN 50177 | 易燃涂層粉末用自動靜電噴涂設備 | Automatic electrostatic spraying equipment for flammable coating powder; German version EN 50177:2006 |
| DIN EN 60317-13 | 特定型號繞組線規范.第13部分:用聚酰胺-酰亞胺涂層的聚酯或聚酰胺酯漆包圓銅線,200級 | Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 (IEC 60317-13:1990); German version EN 60317-13:1994 |
| DIN EN 60317-13/A1 | 特種繞組線規范.第13部分:用聚酰胺-酰亞胺額外涂層的聚酯或聚酰胺酯的上釉圓銅線.200級.修改件A1 (IEC 6031 | Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200; Amendment A1 (IEC 60317-13:1990/A1:1997); German version EN 60317-13/A1:1997 |
| DIN EN 60317-24 | 特定型號繞組線的規范.第24部分:聚酰胺涂層的聚酯或聚酯亞胺漆包圓鋁線,180級 | Specifications for particular types of winding wires - Part 24: Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180 (IEC 60317-24:1990); German version EN 60317-24:1995 |
| DIN EN 60317-25 | 特定型號繞組線的規范.第25部分:聚酰胺-酰亞胺酯涂層的聚亞酰胺酯漆包圓鋁線,200級 | Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC 60317-25:1990); German version EN 60317-25:1996 |
| DIN EN 60317-29 | 特定型號繞組線的規范.第29部分:聚酰胺-酰亞胺涂層的聚酯或聚酰胺酯漆包扁銅線,200級 | Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 (IEC 60317-29:1990); German version EN 60317-29:1996 |
| DIN EN 60603-6 | 頻率 3 MHZ以下印制電路插接件.第6部分:額定厚度為1,6mm(0,063 in)觸點間距2,54mm(0,1 in)單面或雙面涂層印 | Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 60603-6:1987); German version EN 60603-6:1998 |
| DIN EN 60664-3 | 低壓系統內設備的絕緣配合.第3部分:防污染用涂層、罐封或模塑件的使用 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2003); German version EN 60664-3:2003 |
| DIN EN 60684-3-300 | 絕緣軟管.第3部分:各型軟管規范.300節:無涂層玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 |
| DIN EN 60684-3-343 bis 345 | 絕緣軟管.第3部分:各型軟管規范.343至345節:無涂層可擴張乙烯三氟氯乙烯纖維編織軟管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 |
| DIN EN 60684-3-400 bis 402 | 絕緣軟管.第3部分:各型軟管規范.400至402節:帶硅彈性涂層的玻璃纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002 |
| DIN EN 60684-3-406 bis 408 | 絕緣軟管.第3部分:各種型號軟管規范.活頁406-408:帶PVC涂層的玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003 |
| DIN EN 60684-3-409 | 絕緣軟套管.第3部分:套管專用型規范.活頁409:帶聚氨酯基涂層的玻璃織物套管 (IEC 60684-3-409:1999); 德文 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating (IEC 60684-3-409:1999); German version EN 60684-3-409:1999 |
| DIN EN 60793-1-32 | 光纖.第1-32部分:測量方法和試驗過程.涂層的可剝離性 | Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability (IEC 60793-1-32:2001, modified); German version EN 60793-1-32:2003 |
| DIN EN 61249-5-1 | 連接結構材料.第5部分:帶和不帶涂層的導電箔和薄膜分規范.第1節:銅箔(用于生產覆銅基材) | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings; section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995); German version EN 61249-5-1:1996 |
| DIN EN 61249-5-4 | 連接結構材料.第5部分:帶或不帶涂層的導電箔和薄膜分規范.第4節:導電油墨 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings; section 4: Conductive inks (IEC 61249-5-4:1996); German version EN 61249-5-4:1996 |
| DIN EN 61249-8-7 | 連接結構材料.第8部分:非導電薄膜和涂層用分規范.第7節:打印油墨 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; section 7: Marking legend inks (IEC 61249-8-7:1996); German version EN 61249-8-7:1996 |
| DIN EN 61249-8-8 | 互連結構用材料.第8部分:非導電薄膜和涂層分規范集.第8節:非永久性聚合物涂層 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings; Section 8: Temporary polymer coatings (IEC 61249-8-8:1997); German version EN 61249-8-8:1997 |
| DIN EN 868-7 | 計劃進行消毒醫療裝置的包裝材料和包裝系統.第7部分:用環氧乙烷或射線方法進行消毒時使用的可熱密封的醫藥 | Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-7:1999 |
| DIN EN 927-1 | 漆和涂料.外部用木材的涂料和涂層系統.第1部分:分類和選用 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection; German version EN 927-1:1996 |
| DIN EN 927-2 | 涂料和清漆.室外木料涂料和涂層系統.第2部分:性能規范 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification; English version of DIN EN 927-2:2006-07 |
| DIN EN 927-3 | 涂料和清漆.室外木料涂層和涂層系統.第3部分:自然風蝕試驗 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test; English version of DIN EN 927-3:2007-03 |
| DIN EN 927-5 | 涂料和清漆.室外木料涂層和涂層系統.第5部分:液態水滲透性評定 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability; English version of DIN EN 927-5:2007-03 |
| DIN EN ISO 10111 | 金屬和其它無機涂層.單位面積質量的測量.重量測定法和化學分析法述評(ISO 10111:2000); 德文版本 EN ISO 10 | Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000); German version EN ISO 10111:2001) |
| DIN EN ISO 105-X10 | 紡織品.色牢度試驗.第X010部分:織物顏色向聚氯乙烯涂層遷移的評定 | Textiles - Tests for colour fastness - Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings (ISO 105-X10:1993); German version EN ISO 105-X10:1995 |
| DIN EN ISO 10684 | 緊固件.熱浸鍍鋅涂層 | Fasteners - Hot dip galvanized coatings (ISO 10684:2004); German version EN ISO 10684:2004 |
| DIN EN ISO 11507 | 涂料和清漆.涂層暴露于人工風蝕.暴露于熒光紫外燈和水 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007); English version of DIN EN ISO 11507:2007-05 |
| DIN EN ISO 11644 | 皮革.涂層粘著牢度測定方法 | Leather - Test for adhesion of finish (ISO 11644:1993); German version EN ISO 11644:2003 |
| DIN EN ISO 11998 | 涂料和清漆.涂層耐濕洗和清潔度測定(ISO 11998-2006) | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006); English version of DIN EN ISO 11998:2006-10 |
| DIN EN ISO 12683 | 機械鍍鋅涂層.規范和試驗方法 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004); German version EN ISO 12683:2004 |
| DIN EN ISO 12687 | 金屬涂層.孔隙率試驗.濕硫硫磺(硫華)試驗 | Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996); German version EN ISO 12687:1998 |
| DIN EN ISO 12944-7 | 涂料和清漆.用防護涂料系統對鋼結構件進行的防腐蝕保護.第7部分:涂層工作的實施和監督 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998); German version EN ISO 12944-7:1998 |
| DIN EN ISO 1421 | 橡膠和塑料涂層的織物.抗拉強度和延伸率的測定 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:1998); German version EN ISO 1421:1998 |
| DIN EN ISO 1460 | 金屬鍍層.鋼鐵材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量 (ISO 1460:1992); 德文版本 EN ISO 1460:1 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992); German version EN ISO 1460:1994 |
| DIN EN ISO 14713 | 鐵和鋼結構件的防腐.鋅和鋁涂層.指南 | Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999); German version EN ISO 14713:1999 |
| DIN EN ISO 15720 | 金屬涂層.孔隙率試驗.膠材料電版術法測定金屬底材上金或鈀涂層的孔隙率 | Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001); German version EN ISO 15720:2001 |
| DIN EN ISO 15721 | 金屬涂層.孔隙率試驗.用亞硫酸和二氧化硫蒸氣測定金或鈀涂層的孔隙率 | Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001); German version EN ISO 15721:2001 |
| DIN EN ISO 16276-1 | 防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂強度)的評定和驗收標準.第1部分:脫落測試(ISO 16276-1- | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007); German version EN ISO 16276-1:2007 |
| DIN EN ISO 16276-2 | 防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂強度)的評定和驗收標準.第2部分:劃格測試和X切割測試(I | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007); German version EN ISO 16276-2:2007 |
| DIN EN ISO 17233 | 皮革.物理和機械試驗.表面涂層冷裂溫度的測定 | Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002); German version EN ISO 17233:2002 |
| DIN EN ISO 17834 | 熱噴鍍.防高溫腐蝕和氧化的涂層 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003 |
| DIN EN ISO 17872 | 涂料和清漆.腐蝕測試用金屬板涂層上劃線標志的入門指南 | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007); German version EN ISO 17872:2007 |
| DIN EN ISO 20566 | 涂料和清漆.用實驗室洗車臺測定涂層系統耐劃痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash (ISO 20566:2005); English version of DIN EN ISO 20566:2006-01 |
| DIN EN ISO 20567-1 | 涂料和清漆.涂層的耐石片劃痕的測定.第1部分:多沖擊試驗(ISO 20567-1-2005) | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing (ISO 20567-1:2005); English version of DIN EN ISO 20567-1:2007-04 |
| DIN EN ISO 20567-2 | 涂料和清漆.涂層的耐石片劃痕的測定.第2部分:帶導向沖擊體單沖擊試驗(ISO 20567-2-2005) | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body (ISO 20567-2:2005); English version of DIN EN ISO 20567-2:2007-01 |
| DIN EN ISO 2063 | 熱噴涂.金屬和其他無機涂層.鋅、鋁及其合金 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005); German version EN ISO 2063:2005 |
| DIN EN ISO 21227-3 | 涂料和清漆.用光學成像評估涂層表面缺陷.第3部分:劃痕周圍剝離和腐蝕的評估 | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007); German version EN ISO 21227-3:2007 |
| DIN EN ISO 21968 | 金屬和非金屬基材的非磁性金屬涂層.涂層厚度測量.相敏渦流法 | Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005); German version EN ISO 21968:2005 |
| DIN EN ISO 2231 | 橡膠或塑料涂層織物.環境作用和檢驗用標準大氣壓 (ISO 2231:1989); 德文版本 EN ISO 2231:1995 | Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989); German version EN ISO 2231:1995 |
| DIN EN ISO 2286-1 | 橡膠或塑料涂層的織物.卷織物特性的測定.第1部分:長度、寬度和凈質量的測定 | Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Method for determination of the length, width and net mass (ISO 2286-1:1998); German version EN ISO 2286-1:1998 |
| DIN EN ISO 2286-2 | 橡膠或塑料涂層的織物.卷織物特性的測定.第2部分:單位面積總質量、單位面積涂層質量和基布的單位面積質量的 | Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1998 |
| DIN EN ISO 2286-3 | 橡膠或塑料涂層的織物.卷織物特性的測定.第3部分:單位面積的整體的質量,單位面積涂層的質量和單位面積基布 | Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998 |
| DIN EN ISO 2411 | 橡膠或塑料涂覆織物.涂層粘合強度的測定 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000); German version EN ISO 2411:2000 |
| DIN EN ISO 2810 | 涂料和清漆.涂層的自然老化.暴露和評估 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004); German version EN ISO 2810:2004 |
| DIN EN ISO 3543 | 金屬和非金屬涂層.鍍層厚度測量.β射線反向散射法 | Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000); German version EN ISO 3543:2000 |
| DIN EN ISO 3868 | 金屬鍍層和其它無機物涂層.涂層厚度測量.菲索(Fizeau)多光束干涉測量法 (ISO 3868:1976); 德文版本 EN ISO | Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method (ISO 3868:1976); German version EN ISO 3868:1994 |
| DIN EN ISO 3892 | 金屬材料轉化涂層.單位面積涂層質量測定.稱重法 | Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001 |
| DIN EN ISO 4536 | 金屬基質的金屬和無機物涂層.鹽液滴腐蝕試驗(SD 試驗) (ISO 4536:1985); 德文版本 EN ISO 4536:1995 | Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985); German version EN ISO 4536:1995 |
| DIN EN ISO 4541 | 金屬鍍層和其它無機物涂層.柯洛科特(Corrodkote)耐腐蝕試驗(CORR 試驗) (ISO 4541:1978); 德文版本 EN ISO | Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978); German version EN ISO 4541:1994 |
| DIN EN ISO 4543 | 金屬鍍層和其它無機物涂層.儲存條件的一般規則 (ISO 4543:1981); 德文版本 EN ISO 4543:1994 | Metallic and other non-organic coatings - General rules for storage conditions (ISO 4543:1981); German version EN ISO 4543:1994 |
| DIN EN ISO 4628-6 | 涂料和清漆.涂層降解的評估.缺陷的數量和大小及外表一致變化飽和度的標識.第6部分:用粘膠帶法評估粉化等級 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2007); German version EN ISO 4628-6:2007 |
| DIN EN ISO 4674-2 | 橡膠或塑料涂層的織物.抗撕裂強度的測定.第2部分:沖擊擺試驗法 | Rubber or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998); German version EN ISO 4674-2:1998 |
| DIN EN ISO 5470-2 | 橡膠或塑料涂層織物.耐磨性測定.第2部分:馬丁代爾研磨器 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003); German version EN ISO 5470-2:2003 |
| DIN EN ISO 6158 | 金屬涂層.工程用鉻電鍍層 | Metallic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2004); German version EN ISO 6158:2004 |
| DIN EN ISO 6179 | 硫化或熱塑橡膠.橡膠薄板和橡膠涂層織物.揮發性液體滲透速度測定(重力測定技術) | Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:1998); German version EN ISO 6179:2000 |
| DIN EN ISO 6988 | 金屬涂層和其它無機物涂層.普通水分冷凝二氧化硫試驗 | Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985); German version EN ISO 6988:1994 |
| DIN EN ISO 7854 | 橡膠或塑料涂層織物.抗折曲損壞性測定 | Rubber- or plastics-coated fabrics - Determination of resistance to damage by flexing (ISO 7854:1995); German version EN ISO 7854:1997 |
| DIN EN ISO 8130-9 | 涂層粉.第9部分:取樣 | Coating powders - Part 9: Sampling (ISO 8130-9:1992); German version EN ISO 8130-9:1999 |
| DIN EN ISO 8502-4 | 使用涂層材料前鋼基材表面清理準備.表面清潔度評定檢驗.第4部分:涂層前凝露概率估算指南 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993); German version EN ISO 8502-4:1999 |
| DIN EN ISO 8980-4 | 眼科光學.未切邊成品眼鏡片.第4部分:防反射涂層的試驗方法和規范(ISO 8980-4-2006) | Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings (ISO 8980-4:2006); English version of DIN EN ISO 8980-4:2006-11 |
| DIN IEC 60404-12 | 磁性材料.第12部分:層間絕緣涂層的溫度穩定性的評定方法指南 | Magnetic materials - Part 12: Guide to methods of assessment of temperature capability of interlaminar insulation coatings (IEC 60404-12:1992) |
| DIN ISO 6344-2 | 涂層磨料.粒度分析.第2部分:肉眼可見磨料為P12至P220的粒度分布測定 | Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998) |
| DIN ISO 9211-1 | 光學和光學儀器.光學涂層.第1部分:定義(ISO 9211-1:1994) | Optics and optical instruments - Optical coatings - Part 1: Definitions (ISO 9211-1:1994) |
| DIN ISO 9211-2 | 光學和光學儀器.光學涂層.第2部分:光學特性 (ISO 9211-2:1994) | Optics and optical instruments - Optical coatings - Part 2: Optical properties (ISO 9211-2:1994) |
| DIN ISO 9211-3 | 光學和光學儀器.光學涂層.第3部分:環境穩定性 | Optics and optical instruments - Optical coatings - Part 3: Environmental durability (ISO 9211-3:1994) |
| DIN V ENV 1071-5 | 高技術陶瓷.陶瓷涂層的試驗方法.第5部分:孔隙度測定; 德文版本 ENV 1071-5:1995 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 5: Determination of porosity; German version ENV 1071-5:1995 |
| DIN V VDE V 0341-9005 | 絕緣軟套管.第9005部分:熱收縮元件.無內涂層套管的詳細規范 | Flexible insulating sleeving - Part 9005: Heat shrinkable components - Sleevings without inner coating, detail specification |
| DIN V VDE V 0341-9012 | 絕緣軟套管.第9012部分:熱收縮元件.有內涂層套管的詳細規范 | Flexible insulating sleeving - Part 9012: Heat shrinkable components - Sleevings with inner coating, detail specification |
| DIN-Fachbericht 28 | 采用保護漆系統對鋼結構作腐蝕保護.不能目視檢測污染物涂層材料表面的用前試驗 | Corrosion protection of steel structures by protective paint systems - Testing of surfaces before application of coating materials for containments that cannot be detected visually |
| 編號 | 中文名稱 | 英文名稱 |