微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60404-12 | 磁性材料 第12部分:層間絕緣涂層的溫度能力的評定方法的指南 | Magnetic materials; part 12: guide to methods of assessment of temperature capability of interlaminar insulation coatings |
| IEC 60664-3 | 低壓系統內設備的絕緣配合.第3部分:防污染用鑄封或壓模涂層的使用 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| IEC 60684-3-300 | 絕緣軟管.第3部分:各種型號軟管規范.第300篇:無涂層的玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated |
| IEC 60684-3-343 to 345 | 絕緣軟管.第3部分:各種型號軟管規范.第343至345篇:無涂層可擴張編織的乙烯三氟氯乙烯纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated |
| IEC 61249-5-1 | 互連結構用材料 第5部分:有或無涂層的導電箔和薄膜分規范集 第1節:銅箔(用于生產覆銅基材) | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
| IEC 61249-5-4 | 互連結構用材料 第5部分:有或無涂層的導電箔和薄膜分規范集 第4節:導電油墨 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks |
| IEC 61249-8-7 | 互連結構用材料 第8部分:非導電薄膜和涂層分規范集 第7節:打印油墨 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks |
| IEC 61249-8-8 | 互連結構用材料 第8部分:非導電薄膜和涂層分規范集 第8節:非永久高聚物涂層 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings |
| IEC/TR 60344 | 低頻電纜和電線未涂層和涂層銅導線的直流電阻計算.應用指南 | Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide |
| ISO 10247 AMD 1 | 傳送帶.涂層特性.分類.修改件1 | Conveyor belts - Characteristics of covers - Classification; Amendment 1 |
| ISO 105-X10 | 紡織品 色牢度試驗 第X10部分:紡織品顏色向聚氯乙烯涂層遷移的評定 | Textiles; tests for colour fastness; part X10: assessment of migration of textile colours into polyvinyl chloride coatings |
| ISO 10684 | 緊固件.熱浸鍍鋅涂層 | Fasteners - Hot dip galvanized coatings |
| ISO 11507 | 色漆和清漆.暴露涂層到人工風化環境.暴露在熒光紫外線燈和水環境 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water |
| ISO 11644 | 皮革 涂層粘著牢度測定方法 | Leather; test for adhesion of finish |
| ISO 11950 | 冷軋電鍍鉻/氧化鉻涂層鋼板 | Cold-reduced electrolytic chromium/chromium oxide-coated steel |
| ISO 11998 | 色漆和清漆.測定涂層的耐濕性和清潔度 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings |
| ISO 12683 | 機械鍍鋅涂層.規范和試驗方法 | Mechanically deposited coatings of zinc - Specification and test methods |
| ISO 13779-2 | 外科植入物 羥基磷灰石 第2部分:羥基磷灰石覆涂層 | Implants for surgery - Hydroxyapatite - Part 2: Coatings of hydroxyapatite |
| ISO 13779-4 | 外科植入物.羥磷灰石.第4部分:涂層粘結強度的測定 | Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength |
| ISO 14373 | 電阻焊接.無涂層和有涂層低碳鋼的點焊程序 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels |
| ISO 14654 | 鋼筋混凝土用環氧樹脂涂層鋼 | Epoxy-coated steel for the reinforcement of concrete |
| ISO 14655 | 預應力混凝土用環氧樹脂涂層鋼絞線 | Epoxy-coated strand for the prestressing of concrete |
| ISO 14656 | 鋼筋混凝土用環氧樹脂涂層鋼的環氧樹脂粉末和密封材料 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| ISO 14788 | 連續熱浸鍍鋅(5%)鋁合金涂層鋼薄板 | Continuous hot-dip zinc-5% aluminium alloy coated steel sheet |
| ISO 14923 | 熱噴涂.熱噴涂層的表征和試驗 | Thermal spraying - Characterization and testing of thermally sprayed coatings |
| ISO 14924 | 熱噴涂.熱噴涂層的后處理和加工 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings |
| ISO 15234 | 色漆和清漆 甲醛涂層和三聚氰胺涂層的試驗 小型試驗室中甲醛濃度的測定 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber |
| ISO 15720 | 金屬涂層 孔隙率檢測 用涂膠塊陽極電解法檢測基體上金或鈀涂層的孔隙率 | Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography |
| ISO 15721 | 金屬涂層 孔隙率檢測 用硫酸/二氧化硫蒸汽法檢測基體上金或鈀涂層的孔隙率 | Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour |
| ISO 15741 | 色漆和清漆 海上和近海的非腐蝕氣體鋼管內側的減小摩擦涂層 | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases |
| ISO 16053 | 涂料和清漆.外部木材用涂層材料和涂覆系統.自然老化試驗 | Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test |
| ISO 16172 | 波紋鋼管用連續熱浸金屬涂層鋼板 | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
| ISO 16276-1 | 防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂應力)的評定和驗收標準.第1部分:脫落測試 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing |
| ISO 16276-2 | 防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂應力)的評定和驗收標準.第2部分:劃格測試和X切割測試 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing |
| ISO 16773-1 | 涂料和清漆.高阻抗涂層樣品的電化學阻抗頻譜(EIS).第1部分:術語和定義 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 1: Terms and definitions |
| ISO 16773-2 | 油漆及清漆.高阻抗涂層試樣的電化學阻抗譜(EIS).第2部分:數據采集 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2: Collection of data |
| ISO 16962 | 表面化學分析.用輝光放電光發射光譜測定法分析鋅和/或鋁基金屬涂層 | Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| ISO 17233 | 皮革.物理和機械試驗.表面涂層冷裂溫度的測定 | Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings |
| ISO 17834 | 熱噴涂.高溫下抗腐蝕耐氧化保護涂層 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures |
| ISO 17872 | 色漆和清漆.腐蝕試驗用金屬板涂層劃痕標記導則 | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| ISO 17925 | 鋼上鋅和/或鋁基涂層.單位面積涂層質量和化學組分的測定.重量分析法、感應耦合等離子體原子輻射光譜測定法 | Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
| ISO 20502 | 細陶瓷(高級陶瓷、高級工業陶瓷).用劃痕試驗測定陶瓷涂層的粘附性 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing |
| ISO 20566 | 色漆和清漆.用實驗室洗車臺測定涂層系統耐劃痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| ISO 20567-1 | 色漆和清漆.涂層的耐石片劃性的測定.第1部分:多沖擊試驗 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing |
| ISO 20567-2 | 色漆和清漆.涂層的耐石片劃性的測定.第2部分:導向沖擊體單沖擊試驗 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body |
| ISO 2063 | 熱噴鍍.金屬涂層和其他無機覆層.鋅、鋁及其合金 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys |
| ISO 22168 | 道路車輛.影響光源光色的涂層的保持試驗.試驗方法 | Road vehicles - Holding test of coatings influencing the colour of light emitted by light source(s) - Test methods |
| ISO 22778 | 金屬涂層.在鐵和鋼表面上物理蒸發鎘沉淀涂層.規范和試驗方法 | Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods |
| ISO 22779 | 金屬涂層.鋁的物理蒸汽沉積涂層法.規范和試驗方法 | Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods |
| ISO 2411 | 橡膠或塑料涂覆織物 涂層粘合強度的測定 | Rubber- or plastics-coated fabrics - Determination of coating adhesion |
| ISO 2810 | 色漆與清漆.涂層的自然風化.暴露和評定 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment |
| ISO 3185 | 航空航天 強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型的普 | Aerospace; bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3186 | 航空航天 強度等級1250 MPa～1800 MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、大徑 | Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions |
| ISO 3193 Technical Corrigendum 1 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPA; dimensions; technical corrigendum 1 |
| ISO 3193 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3202 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、帶內偏高扭矩十字槽或不打滑扳動結 | Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| ISO 3203 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通雙 | Aerospace; bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 5470-2 | 橡膠或塑料涂層織物.耐磨損性測定.第2部分:馬丁代爾研磨器 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader |
| ISO 5856 | 航空航天 強度等級小于或等于1100 MPa、金屬材料制成、有涂層或無涂層、帶有中或短長度MJ螺紋、大徑桿型及 | Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 6451 | 塑料涂覆織物 聚氯乙烯涂層 熔融快速檢驗法 | Plastics coated fabrics; Polyvinyl chloride coatings; Rapid method for checking fusion |
| ISO 6452 | 橡膠或塑料涂層織物.汽車內裝飾材料霧氣凝結特征的測定 | Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 7590 | 鋼絲繩芯輸送帶 總粗度及涂層厚度測定方法 | Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness |
| ISO 7623 | 鋼絲繩芯輸送帶 繩芯與涂層之間粘合力試驗 原始試驗和熱處理 | Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment |
| ISO 7989-1 | 鋼絲和鋼絲制品.鋼絲的有色金屬涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles |
| ISO 7989-2 | 鋼絲和鋼絲制品.鋼絲的有色金屬涂層.第2部分:鋅或鋅合金涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating |
| ISO 8078 | 航空航天工藝 鋁合金的陽極化處理 無著色涂層的硫酸工藝規程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, undyed coating |
| ISO 8079 | 航空航天工藝 鋁合金的陽極化處理 帶著色涂層的硫酸工藝規程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, dyed coating |
| ISO 8094 | 鋼絲繩芯輸送帶 繩芯與涂層間粘合強度試驗 | Steel cord conveyor belts; Adhesion strength test of the cover to the core layer |
| ISO 8096 Technical Corrigendum 1 | 防水服用橡膠或塑料涂層織物.規范.技術勘誤1 | Rubber- or plastics-coated fabrics for water-resistant clothing - Specification; Technical Corrigendum 1 |
| ISO 8179-2 | 球墨鑄鐵管 外部鍍鋅 第2部分:終飾層用富鋅涂層 | Ductile iron pipes - External zinc coating - Part 2: Zinc rich paint with finishing layer |
| ISO 8501-1 | 涂料和相關產品使用前鋼襯底的制備.表面清潔度的目測評估.第1部分:未涂覆鋼襯底和徹底清除原有涂層后鋼襯底 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 8501-2 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分:局部去除原有涂層后鋼材的除銹等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8980-4 | 眼科光學.半成品眼鏡片.第4部分:防反射涂層的規范和試驗方法 | Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings |
| ISO 9211-1 | 光學和光學儀器 光學涂層 第1部分:定義 | Optics and optical instruments - Optical coatings - Part 1: Definitions |
| ISO 9211-2 | 光學和光學儀器 光學涂層 第2部分:光學特性 | Optics and optical instruments - Optical coatings - Part 2: Optical properties |
| ISO 9211-3 | 光學和光學儀器 光學涂層 第3部分:環境穩定性 | Optics and optical instruments - Optical coatings - Part 3: Environmental durability |
| ISO 9211-4 | 光學和光學儀器.光學涂層.第4部分:規定的試驗方法 | Optics and optical instruments - Optical coatings - Part 4: Specific test methods |
| ISO 9254 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通在 | Aerospace; bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9255 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、普通在 | Aerospace; bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9256 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、大六角 | Aerospace; bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9514 | 色漆和清漆.多組分涂層系統適用期測定.樣品的制備和處理以及試驗指南 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing |
| 編號 | 中文名稱 | 英文名稱 |