微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A35-556 | 冶金產品.供金屬構件用的外螺紋緊固件用熱處理后的特殊鋼. | (Iron and steel. Heat treatable steels for externally threaded fasteners for structural purposes.) |
| NF A35-557 | 冶金產品.高性能機械制造用的外螺紋緊固件用熱處理后特殊鋼. | (Iron and steel. Heat treatable steels for externally threaded, high performance fasteners for engineering purposes.) |
| NF A35-558 | 具有特殊高溫和/或低溫性能的緊固件用鋼和鎳合金 | (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.) |
| NF B51-166 | 人造木板.緊固件取出能力的測定 | (Wood-based panels - Determination of withdrawal capacity of fasteners.) |
| NF E25-001 | 緊固件.質量保證體系 | (Fasteners - Quality assurance system.) |
| NF E25-004 | 緊固件.簡單標記 | (Fasteners. Short notations.) |
| NF E25-006 | 緊固件.驗收檢驗 | (Fasteners - Acceptance inspection.) |
| NF E25-007 | 緊固件.定貨和供貨條件 | (Fasteners. Order and delivery specifications.) |
| NF E25-009 | 緊固件.電鍍層 | (Fasteners - Electroplated coatings.) |
| NF E25-011 | 緊固件的機械特性.由非亞鐵金屬制造的螺栓,螺釘,柱螺栓和螺母 | (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).) |
| NF E25-019 | 緊固件.ISO米制外螺紋部件的端頭 | (Fasteners - Ends of parts with external ISO metric screw thread.) |
| NF E25-022-1 | 緊固件公差.螺栓、螺釘、雙頭螺栓和螺母.第1部分:產品等級A、B及C | (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.) |
| NF E25-022 | 緊固件.Ｆ級螺釘和螺帽公差（精密機械）.螺紋直徑1到3mm | (FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.) |
| NF E25-023 | 緊固件.螺栓和螺釘?shù)淖杂沙叽缈? | (Fasteners. Clearance hole for bolts and screws.) |
| NF E25-035 | 緊固件.不銹鋼螺紋連接件.試驗方法.使用合格證 | (FASTENERS. STAINLESS STEEL THREADED CONNECTIONS. TEST METHODS. FITNESS FOR USE.) |
| NF E25-040 | 緊固件.非電解用鋅片覆層 | (Fasteners - Non-electrolytically applied zinc flake coatings.) |
| NF E25-042 | 耐腐蝕不銹鋼緊固件的鈍化 | (Passivation of corrosion-resistant stainless-steel fasteners.) |
| NF E25-100-1 | 碳鋼合金制成的緊固件的機械性能.第1部分:螺栓、螺釘和螺柱 | (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.) |
| NF E25-100-3 | 緊固件.表面不連續性.第1部分:一般要求的螺栓、螺釘和螺柱 | (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).) |
| NF E25-100-4 | 緊固件.表面不連續性.第3部分:特殊要求的螺栓、螺釘和螺柱 | (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).) |
| NF E25-100-5 | 碳鋼和不銹鋼制緊固件的機械性能.第5部分:不處在拉伸應力下的固定螺釘和類似螺紋緊固件 | (Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.) |
| NF E25-100-6 | 不銹鋼緊固件耐腐蝕的機械特性.螺栓,螺絲和雙端螺栓 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.) |
| NF E25-100-7 | 緊固件的機械性能.第7部分:公稱直徑1-10mm的螺栓和螺釘?shù)呐ちυ囼灪妥钚∨ぞ? | (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) |
| NF E25-100-8 | 不銹鋼緊固件耐腐蝕的機械特性.不低于拉伸應力下配套螺釘和類似緊固件 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.) |
| NF E25-113 | 緊固件.六角頭螺栓.B級、縮桿制品 | (Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).) |
| NF E25-133 | 緊固件.螺桿千斤頂用的金屬螺釘.短六角頭長制動端螺釘.Ａ和Ｂ級.符號ＨＺ | (Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.) |
| NF E25-134 | 緊固件.螺桿千斤頂用的金屬螺釘.短方頭短制動端螺釘.Ａ和Ｂ級.符號ＱＺ | (Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.) |
| NF E25-136 | 緊固件.螺桿.A和B級產品 | (Fasteners. Threaded rods. Product grades A and B.) |
| NF E25-139 | 緊固件.金屬用螺釘.Ｚ十字槽寬凸圓柱形頭.Ａ級.符號ＣＢＬＺＳ | (FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.) |
| NF E25-140 | 緊固件.電弧焊接雙端螺栓.符號SA.尺寸和物理化學特性.拉制電弧焊接螺栓系統 | (FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.) |
| NF E25-142 | 緊固件.電阻焊金屬螺釘.縮小頭 | (FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.) |
| NF E25-143 | 緊固件.電容器電焊全螺紋螺柱 | (FASTENERS. WELDINGSTUDS BY CONDENSOR DISCHARGE. SYMBOL SD.) |
| NF E25-144 | 緊固件.電弧焊全螺紋螺柱 | (FASTENERS. ENTIRELY THREADED ARC WELDING STUDS. SYMBOL SF.) |
| NF E25-145 | 緊固件.電弧焊不完全螺紋螺柱 | (FASTENERS. PARTIALLY THREADED ARC WELDING STUDS. SYMBOL SF.) |
| NF E25-400-1 | 緊固件的機械性能.第2部分:有規定的檢驗載荷值的螺母.粗牙螺紋 | (Mechanical properties of fasteners. Part 2 : nuts with specified proof load values. Coarse thread.) |
| NF E25-400-3 | 緊固件.表面不連續性.螺母 | (Fasteners. Surface discontinuities. Nuts.) |
| NF E25-418 | 電阻焊接用六角形螺母.符號HSR緊固件 | (FASTENERS. RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.) |
| NF E25-501 | 緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.A級和C級 | (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.) |
| NF E25-540 | 緊固件.螺母鎖緊 | (Fasteners - Nut lock.) |
| NF E25-600 | 緊固件.木螺釘系列標準 | (FASTENERS. WOOD SCREWS FAMILY STANDARD.) |
| NF E25-651 | 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘 | (Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws.) |
| NF E25-666 | 緊固件.自攻螺釘.Z形十字槽和一字槽平圓頭螺釘.符號CBL ZS | (FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. SYMBOL CBL ZS.) |
| NF E25-800-0 | 緊固件.波紋鋼管用螺栓.第0部分:按要求所制的螺栓 | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).) |
| NF E25-800-1 | 緊固件.波紋鋼管用螺栓.第1部分:帶法蘭或不帶法蘭,帶尖或不帶尖的六角頭螺釘.產品等級A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-800-2 | 緊固件.波紋鋼管用螺栓.第2部分:帶尖或不帶尖的圓頭螺釘.產品等級A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-800-3 | 緊固件.波紋鋼管用螺栓.第3部分:不帶法蘭的凸形六角螺母.產品等級C | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.) |
| NF E25-800-4 | 緊固件.波紋鋼管用螺栓.第4部分:帶法蘭的凸形螺母.產品等級C | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.) |
| NF E25-850 | 緊固件.直角彎鉤 | (FASTENERS. SQUARE BEND HOOKS.) |
| NF E25-851 | 緊固件.滾制螺釘(ISO米制螺紋).特性 | (FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.) |
| NF E27-009 | 緊固件.軸向負荷疲勞試驗 | (FASTENERS. FATIGUE TEST UNDER AXIAL LOAD.) |
| NF E27-156 | 緊固件.結構安裝用圓頭鉚釘 | (Fasteners. Structural round head rivets.) |
| NF E27-191 | 緊固件.有肩固定螺釘 | (FASTENERS. SHOULDERED RETAINING SCREWS.) |
| NF E27-355 | 緊固件.底板受力器材.輕微磨損零件固定用的雙耳埋頭螺栓 | (FASTENERS. EQUIPMENT FOR WORKING THE SOIL. COUNTERSUNK HEAD NIB BOLTS FOR FASTENING THIN WEAR PARTS.) |
| NF E51-361 | 螺紋緊固件用旋轉式氣動裝配工具.性能試驗 | (Rotary tools for threaded fastners. Performance test method.) |
| NF E65-100-1 | 手持非電動工具.安全要求.第1部分:非螺紋機器緊固件的組件動力工具 | (Hand-held non-electric power tools - Safety requirements - Part 1 : assembly power tools for non-threaded mechanical fasteners.) |
| NF E65-100-6 | 手持非電動工具.安全要求.第6部分:螺紋緊固件組件動力工具 | (Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners.) |
| NF E65-115 | 聲學.緊固件傳動工具用噪聲試驗規范.工程法 | (Acoustics - Noise test code for fastener driving tools - Engineering method.) |
| NF H50-010-1 | 托盤連接件的檢驗方法.第1部分:托盤用釘子、其它榫釘型緊固件和U形釘抗彎曲性的測定 | (Methods of test for pallet joints. Part 1 : determination of bending resistance of pallet nails, other dowel-type fasteners and staples.) |
| NF L20-010 | 航空和航天.設備.NFE系列緊固件的選擇 | (AEROSPACE SERIES. EQUIPMENT. CHOICE OF FASTENERS,NF E SERIES.) |
| NF L21-215 | 緊固件.實心萬向頭鉚釘 | (Fasteners - Rivets, solid, universal head.) |
| NF L21-250 | 緊固件.管形鉚釘 | (Fasteners - Rivets, tubular.) |
| NF L21-271 | 緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的凸頭鎖緊螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-272 | 緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的100°埋頭鎖緊螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-273 | 緊固件.緊公差T-A６V鋁合金桿并有XC１０鋼環凸頭鎖緊螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-274 | 緊固件.緊公差T-A６V鈦合金桿并有XC１０鋼環１００°埋頭鎖緊螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L22-023 | 飛行器緊固件標準一覽表.符合B.N.A.E.公差的ISO螺紋 | (LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO B.N.A.E. TOLERANCES.) |
| NF L22-024 | 飛行器緊固件標準一覽表.符合ISO公差的ISO螺紋 | (LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO ISO TOLERANCES.) |
| NF L22-030 | 飛行器緊固件.鋼號和機械特性.(RECH.) | (AIRCRAFT FASTENERS. STEEL GRADES AND MECHANICAL PROPERTIES. (RECH.).) |
| NF L22-031 | 緊固件.金屬材料的選擇 | (Fasteners - Selection of metallic materials.) |
| NF L22-035 | 飛行器緊固件.標志.(RECH.) | (AIRCRAFT FASTENERS. MARKING. (RECH.).) |
| NF L22-062 | 用扳手操作的緊固件的ISO對邊 | (ISO ACROSS FLATS FOR FASTENERS WITH SPANNER DRIVE.) |
| NF L22-500 | 緊固件.最高使用溫度小于或等于425℃的自鎖緊螺母.技術要求 | (Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 o - Technical requirements.) |
| NF L22-721 | 飛行器緊固件.帶開口銷孔的實心螺紋銷.ISO螺紋.(RECH.) | (AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-722 | 飛行器緊固件.帶開口銷孔的空心螺紋銷.ISO螺紋.(RECH.) | (AIRCRAFT FASTENERS. HOLLOW PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L22-723 | 飛行器緊固件.無開口銷孔的實心螺紋銷.ISO螺紋.(RECH.) | (AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITHOUT SPLIT PIN HOLE. (ISO THREAD). (RECH.).) |
| NF L23-142 | 航空飛行器緊固件.斜面厚墊圈 | (AIRCRAFT FASTENERS. THICK CHAMFERED WASHERS.) |
| NF L23-310 | 航空飛行器緊固件.開口銷 | (AIRCRAFT FASTENERS. SPLIT PINS.) |
| NF L23-350 | 飛行器緊固件.鋼板制帶耳的止動墊圈.平型 | (AIRCRAFT FASTENERS. TAB WASHERS MADE OF STEEL PLATE,FLAT TYPE.) |
| NF L23-351 | 飛行器緊固件.鋼板制外部帶耳的止動墊圈 | (AIRCRAFT FASTENERS. EXTERNAL TAB WASHERS MADE OF STEEL PLATE.) |
| NF P21-205-1 | DTU31.3.與金屬板緊固件和聯接板相關的木結構框架.第1部分:建筑規則 | (DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 1 : CONSTRUCTION RULES.) |
| NF P21-205-2 | DTU31.3.與金屬板緊固件或聯接板相關的木材結構.第2部分:設計規則 | (DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 2 : DESIGN RULES.) |
| NF P21-205-3 | DTU31.3.與金屬板緊固件和聯接板相關的木結構框架.第3部分:特別規范手冊 | (DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 3 : PARTICULAR SPECIFICATIONS BOOK.) |
| NF P21-303 | 木材構件.試驗方法.暗銷形緊固件基座值和嵌入強度測定 | (TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF EMBEDDING STRENGTH AND FOUNDATION VALUES FOR DOWEL TYPE FASTENERS. (EUROPEAN STANDARD EN 383).) |
| NF P21-312 | 木結構.試驗方法.用穿孔金屬板緊固件進行組裝 | (Timber structures - Test methods - Joints made with punched metal plate fasteners.) |
| NF P21-380 | 木結構.試驗方法.機械緊固件用接頭的循環試驗 | (Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners.) |
| NF P21-384 | 木材構件.試驗方法.暗銷形緊固件屈服力矩.釘子 | (TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF THE YIELD MOMENT OF DOWEL TYPE FASTENERS. NAILS. (EUROPEAN STANDARD EN 409).) |
| NF P21-385 | 木緊固件.木連接件規范 | (Timber fasteners - Specifications for connectors for timber.) |
| NF P21-388 | 木質緊固件.負載電容器的特性和連接件的滑動系數 | (Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints.) |
| NF T47-131 | 輸送機皮帶.機械緊固件的強度測定.靜態試驗法 | (Conveyor belts - Determination of strength of mechanical fastenings - Static test method.) |
| P21-205 | DTU 31-3.與金屬板緊固件或結點板相連接的木構件.第1部分:技術規范.第2部分:特別條款 | (DTU 31-3 - Timber structures connected with metal plate fasteners or gussets - Part 2 : design rules - Part 3 : particular specifications book.) |
| 編號 | 中文名稱 | 英文名稱 |