微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DL 439-1991(2005) | 火力發電廠高溫緊固件技術導則 | () |
| DL/T 439 | 火力發電廠高溫緊固件技術導則 | () |
| DL/T 764.1 | 電力金具專用緊固件 六角頭帶銷孔螺栓 | () |
| DL/T 764.2 | 電力金具專用緊固件 閉口銷 | () |
| GB/T 10431 | 緊固件橫向振動試驗方法 | () |
| GB/T 11577 | 船用集裝箱緊固件 | Container securing fitting for ships |
| GB/T 1237 | 緊固件標記方法 | Designation system for fasteners |
| GB/T 13682 | 螺紋緊固件軸向載荷疲勞試驗方法 | Axial load fatigue testing for threadedfasteners |
| GB/T 13806.1 | 精密機械用緊固件十字槽螺釘 | Fasteners for fine mechanics--Cross recessed screws |
| GB/T 13806.2 | 精密機械用緊固件十字槽自攻螺釘刮削端 | Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point |
| GB/T 152.1 | 緊固件鉚釘用通孔 | Fasteners--Clearance holes for rivets |
| GB/T 152.2 | 緊固件沉頭用沉孔 | Fasteners--Countersinks for countersunk head screws |
| GB/T 152.3 | 緊固件圓柱頭用沉孔 | Fasteners--Counterbores for hexagon socket head screws and slotted cheese head screws |
| GB/T 152.4 | 緊固件六角頭螺栓和六角螺母用沉孔 | Fasteners--Counterbores for hexagonbolts and nuts |
| GB/T 16823.1 | 螺紋緊固件應力截面積和承載面積 | Stress area and bearing area for threaded fasteners |
| GB/T 16823.2 | 螺紋緊固件緊固通則 | General rules of tightening for threaded fasteners |
| GB/T 16823.3 | 螺紋緊固件擰緊試驗方法 | Method of tightening test for threaded fasteners |
| GB/T 16938 | 緊固件 螺栓、螺釘、螺柱和螺母 通用技術條件 | () |
| GB/T 18747.1 | 厭氧膠粘劑扭矩強度的測定(螺紋緊固件) | The determination of torque strength of anaerobic adhesives (Threaded fasteners) |
| GB/T 2 | 緊固件外螺紋零件的末端 | Fasteners--Ends of parts with external thread |
| GB/T 3098.1 | 緊固件機械性能螺栓、螺釘和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs |
| GB/T 3098.10 | 緊固件機械性能有色金屬制造的螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals |
| GB/T 3098.11 | 緊固件機械性能自鉆自攻螺釘 | Mechanical properties of fasteners--Drilling screws with tapping screw thread |
| GB/T 3098.12 | 緊固件機械性能螺母錐形保證載荷試驗 | Mechanical properties of fasteners--Cone proof load test on nuts |
| GB/T 3098.13 | 緊固件機械性能螺栓與螺釘?shù)呐ぞ卦囼?yàn)和破壞扭矩公稱直徑1～10mm | Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm |
| GB/T 3098.14 | 緊固件機械性能螺母擴孔試驗 | Mechanical properties of fasteners--Widening test on nuts |
| GB/T 3098.15 | 緊固件機械性能不銹鋼螺母 | Mechanical properties of fasteners--Nuts made of stainless-steel |
| GB/T 3098.16 | 緊固件機械性能不銹鋼緊定螺釘 | Mechanical properties of fasteners--Setscrews made of stainless-steel |
| GB/T 3098.17 | 緊固件機械性能檢查氫脆用預載荷試驗平行支承面法 | Mechanical properties of fasteners--Preloading test for the detection of hydrogen embrittlement--Parallel bearing surface method |
| GB/T 3098.18 | 緊固件機械性能盲鉚釘試驗方法 | Mechanical properties of fasteners--Blind rivets testing |
| GB/T 3098.19 | 緊固件機械性能抽芯鉚釘 | Mechanical properties of fasteners--Blind rivets with break pull mandrel |
| GB/T 3098.2 | 緊固件機械性能螺母粗牙螺紋 | Mechanical properties of fasteners--Nuts--Coarse thread |
| GB/T 3098.20 | 緊固件機械性能蝶形螺母保證扭矩 | Mechanical properties of fasteners--Wing nuts with specified proof torque |
| GB/T 3098.21 | 緊固件機械性能 不銹鋼自攻螺釘 | () |
| GB/T 3098.3 | 緊固件機械性能緊定螺釘 | Mechanical properties of fasteners--Set screws |
| GB/T 3098.4 | 緊固件機械性能螺母細牙螺紋 | Mechanical properties of fasteners--Nuts--Fine pitch thread |
| GB/T 3098.5 | 緊固件機械性能自攻螺釘 | Mechanical properties of fasteners--Tapping screws |
| GB/T 3098.6 | 緊固件機械性能不銹鋼螺栓、螺釘和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs made of stainless-steel |
| GB/T 3098.7 | 緊固件機械性能自擠螺釘 | Mechanical properties of fasteners--Thread rolling screws |
| GB/T 3098.8 | 緊固件機械性能耐熱用螺紋連接副 | Mechanical properties of fasteners--Components for bolted connections made mainly from materials with a high temperature strength |
| GB/T 3098.9 | 緊固件機械性能有效力矩型鋼六角鎖緊螺母 | Mechanical properties of fasteners--Prevailing torque type steel hesagon nuts |
| GB/T 3099.1 | 緊固件術語 螺紋緊固件、銷及墊圈 | () |
| GB/T 3099.2 | 緊固件術語盲鉚釘 | Terminology of fasteners--Blind rivets |
| GB/T 3103.1 | 緊固件公差螺栓、螺釘、螺柱和螺母 | Tolerances for fasteners--Bolts，screws，studs and nuts |
| GB/T 3103.2 | 緊固件公差用于精密機械的螺栓、螺釘和螺母 | Tolerances for fasteners--Bolts，screws and nuts for fine mechanics |
| GB/T 3103.3 | 緊固件公差平墊圈 | Tolerances for fasteners--Plain washers |
| GB/T 3103.4 | 緊固件公差耐熱用螺紋連接副 | Tolerances for fasteners--Components for bolted connections made mainly from materials with a high temperature strength |
| GB/T 3104 | 緊固件六角產品的對邊寬度 | Fasteners--Widths across flats of hexagon products |
| GB/T 4459.1 | 機械制圖螺紋及螺紋緊固件表示法 | Mechanical drawings--Representation of screw threads and threaded parts |
| GB/T 5267.1 | 緊固件電鍍層 | Fasteners--Electroplated coatings |
| GB/T 5267.2 | 緊固件非電解鋅片涂層 | Fasteners--Non-electrolytically applied zinc flake coatings |
| GB/T 5267.3 | 緊固件 熱浸鍍鋅層 | () |
| GB/T 5276 | 緊固件螺栓、螺釘、螺柱及螺母尺寸代號和標注 | Fasteners--Bolts，screws，studs and nuts--Symbols and designations of dimensions |
| GB/T 5277 | 緊固件螺栓和螺釘通孔 | Fasteners--Clearance holes for bolts and screws |
| GB/T 5278 | 緊固件開口銷孔和金屬絲孔 | Fasteners--Split pin holes and wireholes |
| GB/T 5779.1 | 緊固件表面缺陷螺栓、螺釘和螺柱一般要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements |
| GB/T 5779.2 | 緊固件表面缺陷螺母 | Fasteners--Surface discontinuities--Nuts |
| GB/T 5779.3 | 緊固件表面缺陷螺栓、螺釘和螺柱特殊要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements |
| GB/T 6189 | 緊固件用六角花形E型 | Hexagon lobular for fasteners--Type E |
| GB/T 8446.3 | 電力半導體器件用散熱器第3部分:絕緣件和緊固件 | Heat sink for power semiconductor device--Part 3:Insulators and fasteners |
| GB/T 90.1 | 緊固件驗收檢查 | Fasteners--Acceptance inspectiox |
| GB/T 90.2 | 緊固件標志與包裝 | Fasteners--Marking and packaging |
| GB/T 9125 | 管法蘭連接用緊固件 | Fasteners for pipe flange joints |
| HG 20613 | 鋼制管法蘭用緊固件（歐洲體系） | () |
| HG 20614 | 鋼制管法蘭、墊片、緊固件選配規定（歐洲體系） | () |
| HG 20634 | 鋼制管法蘭用緊固件（美洲體系） | () |
| HG 20635 | 鋼制管法蘭、墊片、緊固件選配規定（美洲體系） | () |
| JB/T 1308.2 | 緊固件測試方法 尺寸與幾何精度 木螺釘 | () |
| JB/T 2778 | 閥門零部件 高壓管件和緊固件溫度標記 | () |
| JB/T 4213 | 緊固件冷鐓模具 技術條件 | () |
| JB/T 58652 | 緊固件產品品種質量等級評定 | () |
| JB/T 7383 | 緊固件 十字槽精沖模 | () |
| JB/T 7384.1 | 緊固件 對角寬度止端檢驗?zāi)? | () |
| JB/T 7384.10 | 緊固件 桿部銷孔、頭部銷孔對稱度、開槽螺母對稱度及開口銷孔垂直度檢具 | () |
| JB/T 7384.11 | 緊固件 螺母螺紋垂直規 | () |
| JB/T 7384.12 | 緊固件 螺桿直線度檢驗?zāi)? | () |
| JB/T 7384.13 | 緊固件 自攻鎖緊螺釘外接圓直徑量規 | () |
| JB/T 7384.14 | 緊固件 木螺釘螺紋小徑卡尺 | () |
| JB/T 7384.15 | 緊固件 檢測開口銷兩腳的間隙和錯移量環規 | () |
| JB/T 7384.16 | 緊固件 鉚釘孔徑塞規 | () |
| JB/T 7384.17 | 緊固件 鉚釘孔深塞規 | () |
| JB/T 7384.18 | 緊固件 墊圈孔徑量規 | () |
| JB/T 7384.2 | 緊固件 沉頭及半沉頭部高度檢驗?zāi)? | () |
| JB/T 7384.3 | 緊固件 頭部高度及開槽與支承面間的厚度檢驗?zāi)? | () |
| JB/T 7384.4 | 緊固件 扳擰高度檢驗?zāi)? | () |
| JB/T 7384.5 | 緊固件 內六角量規 | () |
| JB/T 7384.6 | 緊固件 內六角對角寬度通端量規 | () |
| JB/T 7384.7 | 緊固件 開槽寬度塞規 | () |
| JB/T 7384.8 | 緊固件 開槽深度塞規 | () |
| JB/T 7384.9 | 緊固件 開槽螺母槽底與支承面間的厚度卡規 | () |
| JB/T 7912 | 商品緊固件的普通螺紋選用系列 | () |
| JB/T 9149 | 標準緊固件的重量 | () |
| JB/T 9151.1 | 緊固件測試方法 尺寸與幾何精度 螺栓、螺釘、螺柱和螺母 | () |
| JB/T 9151.3 | 緊固件測試方法 尺寸與幾何精度 自攻螺釘 | () |
| JB/T 9151.4 | 緊固件測試方法 尺寸與幾何精度 墊圈 | () |
| JB/T 9151.5 | 緊固件測試方法 尺寸與幾何精度 銷 | () |
| JB/T 9151.6 | 緊固件測試方法 尺寸與幾何精度 鉚釘 | () |
| JB/T 9151.7 | 緊固件測試方法 尺寸與幾何精度 擋圈 | () |
| MT/T 187.1 | 刮板輸送機緊固件 螺栓技術條件 | () |
| MT/T 187.10 | 刮板輸送機緊固件 E型螺栓 | () |
| MT/T 187.2 | 刮板輸送機緊固件 U型螺栓 | () |
| MT/T 187.3 | 刮板輸送機緊固件 棱頭螺栓A型 | () |
| MT/T 187.4 | 刮板輸送機緊固件 棱頭螺栓B型 | () |
| MT/T 187.5 | 刮板輸送機緊固件 長方頭螺栓 | () |
| MT/T 187.6 | 刮板輸送機緊固件 梯形頭螺栓 | () |
| MT/T 187.7 | 刮板輸送機緊固件 半圓頭方頸螺栓 | () |
| MT/T 187.8 | 刮板輸送機緊固件 非金屬嵌件六角鎖緊螺母 | () |
| MT/T 913 | 礦用液壓螺母及其高強度緊固件尺寸系列和技術條件 | () |
| QC/T 518 | 汽車用螺紋緊固件緊固扭矩 | Tightening torque for automotive threaded fasteners |
| QC/T 597-1999(2005) | 螺紋緊固件預涂微膠囊厭氧干膜膠 | () |
| 編號 | 中文名稱 | 英文名稱 |