微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A04-302 | 鋼鐵產品.用斷裂法對奧氏體晶粒放大傾向和對工具鋼淬火深度的測定(謝佛特氏試驗) | (Iron and steel. Determination using fracture test pieces of the austenitic grain growth tendency and of the hardness depth in tool steels (shepherd test).) |
| NF A35-590 | 鋼鐵產品.工具鋼 | (IRON AND STEEL. TOOL STEELS.) |
| NF A45-103 | 鐵和鋼.工具鋼軋制鋼棒和扁鋼.尺寸和公差 | (Iron and steel. Rolled tools steel bars and flat. Dimensional tolerances.) |
| NF A45-104 | 冶金產品.工具鋼鍛造的棒鋼和扁鋼.尺寸公差 | (Iron and steel. Forged tool steel bars and flats. Dimensional tolerances.) |
| NF A92-118 | 搪瓷.搪瓷器皿耐碰撞測定.焊接工具試驗 | (VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF THE RESISTANCE OF ENAMELLED ARTICLES TO IMPACT. PISTOL TEST.) |
| NF B54-500 | 木材.工具柄.質量分類 | (WOOD. TOOL HANDLES. QUALITATIVE CLASSIFICATION.) |
| NF B54-501 | 木材.工具柄.園藝用耙柄 | (WOOD. TOOL HANDLES. GARDEN RAKE HANDLES.) |
| NF B54-502 | 木材.工具柄.鋤柄 | (WOOD. TOOL HANDLES. HOE HANDLES.) |
| NF B54-503 | 木材.工具柄.帶套筒的草叉柄 | (WOOD. TOOL HANDLES. HANDLES OF HAYFORKS,SLEEVE TYPE.) |
| NF B54-504 | 木材.工具柄.帶曲柄頸的草叉柄 | (WOOD. TOOL HANDLES. HANDLES OF HAYFORKS,TONGUE TYPE.) |
| NF B54-505 | 木材.工具柄.帶套筒鏟叉柄、鋤柄 | (WOOD. TOOL HANDLES. HANDLES OF GARDEN FORKS,SPADE HANDLES,SLEEVE TYPE.) |
| NF B54-506 | 木材.工具柄.長柄鐵鍬的柄 | (WOOD. TOOL HANDLES. SPADE HANDLES.) |
| NF B54-507 | 木材.工具柄.帶曲柄頸的鏟叉柄、鋤柄 | (WOOD. TOOL HANDLES. HANDLES OF GARDEN FORKS,SPADE HANDLES,TONGUE TYPE.) |
| NF B54-508 | 木材.工具柄.帶插筒的糞叉柄 | (WOOD. TOOL HANDLES. HANDLES OF MANURE FORKS,SLEEVE TYPE.) |
| NF B54-509 | 木材.工具柄.帶曲柄頸的糞叉柄 | (WOOD. TOOL HANDLES. HANDLES OF MANURE FORKS,TONGUE TYPE.) |
| NF B54-510 | 木材.工具柄.帶插筒的石子或道渣叉柄 | (WOOD. TOOL HANDLES. HANDLES OF PEBBLE AND BALLAST FORKS,SLEEVE TYPE.) |
| NF B54-511 | 木材.工具柄.帶曲柄頸的石子或道渣叉柄 | (WOOD. TOOL HANDLES. HANDLES OF PEBBLE AND BALLAST FORKS,TONGUE TYPE.) |
| NF B54-512 | 木材.工具柄.斧柄、鋤柄、鎬柄 | (WOOD. TOOL HANDLES. HANDLES OF WEEDING HOES,COMBINED HOES/FORKS,HOES.) |
| NF B54-513 | 木材.工具柄.帶橢圓眼的斧柄 | (WOOD. TOOL HANDLES. OVAL EYED PICK HANDLES.) |
| NF B54-514 | 木材.工具柄.帶圓眼的斧柄 | (WOOD. TOOL HANDLES. ROUND EYED PICK HANDLES.) |
| NF B54-515 | 木材.工具柄.鉆子柄 | (WOOD. TOOL HANDLES. AUGER HANDLES.) |
| NF B54-516 | 木材.工具柄.刀柄 | (WOOD. TOOL HANDLES. FILE HANDLES.) |
| NF B54-517 | 木材.工具柄.鵝頸鉸柄 | (WOOD. TOOL HANDLES. GOOSENECK SHOVEL HANDLES.) |
| NF B54-521 | 木材.工具柄.木制錘柄 | (WOOD. TOOL HANDLES. DOGWOOD SLEDGEHAMMER HANDLES.) |
| NF B54-522 | 木材.工具柄.木制手錘柄 | (WOOD. TOLL HANDLES. HAND HAMMER HANDLES MADE OF DOGWOOD.) |
| NF C18-400 | 在交流電1000V和直流電1500V的情況下帶電作業用的手工工具 | (Hand tools for live working up to 1000 A.C. And 1500 V D.C.) |
| NF C18-400/A2 | 交流1000V和直流1500V以下帶電作業用手持工具 | (Hand tools for live working up to 1 000 V a.c. and 1 500 V d.c.) |
| NF C18-402 | 帶電作業用絕緣棒和萬能工具配件 | (Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working.) |
| NF C18-403 | 帶電作業.工具,設備和器械術語 | (Live working - Terminology for tools, equipment and devices.) |
| NF C75-100 | 手提式電動工具.第1部分：一般規則 | (Hand-held motor operated tools. Part 1 : general requirements.) |
| NF C75-200 | 可移動式自動操作電氣工具的安全.第1部分:一般要求 | (Safety of transportable motor-operated electric tools. Part 1 : general requirements.) |
| NF C75-300 | 手持電動工具的安全.第1部分:一般要求 | (SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 144-1).) |
| NF C75-301 | 手提式電動工具安全性.第2-1部分:電鉆的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-1 : particular requirements for drills.) |
| NF C75-302 | 手提式電動工具安全性.第2-2部分:電動旋具和電動套筒扳手的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-2 : particular requirements for screwdrivers and impact wrenches.) |
| NF C75-304 | 手提式電動工具安全性.第2-4部分:噴砂機的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-4 : particular requirements for sanders.) |
| NF C75-305 | 手提式電動工具的安全.第2-5部分:圓盤鋸和圓盤刀 | (Safety of hand-held electric motor operated tools. Part 2-5 : particular requirements for circular saws and circular knives.) |
| NF C75-306 | 手提式電動工具安全性.第2-6部分:電錘的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-6 : particular requirements for hammers.) |
| NF C75-307 | 手提式電動工具安全性.第2-7部分:電噴槍的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-7 : particular requirements for spray guns.) |
| NF C75-308 | 手提式電動工具安全性.第2-8部分:電動金屬皮剪刀和下料剪的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-8 : particular requirements for sheet metal shears and nibblers.) |
| NF C75-309 | 手提式電動工具安全性.第2-9部分:電動攻絲機的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-9 : particular requirements for tappers.) |
| NF C75-310 | 手提式電動工具安全性.第2-10部分:電動細鋸的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-10 : particular requirements for jig saws.) |
| NF C75-311 | 手提式電動工具安全性.第2-11部分:戰刀形手持電動鋸和雙面往復式鋸的特殊要求 | (SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS. PART 2-11 : PARTICULAR REQUIREMENTS FOR SABRE SAWS AND DOUBLE BLADE RECIPROCATING SAWS. (EUROPEAN STANDARD EN 50 144-2-11).) |
| NF C75-314 | 手提式電動工具安全性.第2-14部分:手持電動刨的特殊要求 | (Safety of hand-held electric motor operated tools. Part 2-14 : particular requirements for planers.) |
| NF C75-315 | 手提式電動工具安全性.第2-15部分:樹籬修剪機的特殊要求 | (Safety of hand-held electric motor operated tools - Part 2-15 : particular requirements for hedge trimmers.) |
| NF C91-014-1 | 電磁兼容性.家用器具、電動工具和類似電器的要求.第1部分:輻射 | (Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : emission.) |
| NF C91-014-1/A1 | 電磁兼容性.家用電器、電動工具和類似電器的性能要求.第1部分:發射 | (Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : emission.) |
| NF C91-014-1/A2 | 電磁兼容性.家用器具、電動工具和類似電器的要求.第1部分:輻射 | (Electromagnetic compatibility - Requirements for household appliances, electric tool and similar apparatus - Part 1 : emission.) |
| NF C91-014-2 | 電磁兼容性(EMC).家用電器,電動工具和類似設備的要求.第2部分:抗擾性.產品系列標準 | (Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 2 : immunity. Product family standard.) |
| NF C91-014-2/A1 | 電磁兼容性.家用設備、電動工具和類似器具的要求.第2部分:抗干擾性.產品系列標準 | (Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : immunity - Product family standard.) |
| NF C93-400-15-8 | 電子設備用機電元件.基本試驗過程和測量方法.第15部分:觸點和終端的機械試驗.第8節:試驗15h:對所用工具有阻 | (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 15 : mechanichal tests on contacts and terminations. Section 8 : test 15h : contact retention system resistance to tool application.) |
| NF C93-470-8 | 電子設備的電機元件.基本試驗過程和測量方法.第15部分:接點和終端的機械試驗.第8節:試驗15H:對工具應用的接 | () |
| NF E26-030 | 起重工具用短環和特短環校準負載鏈.表面硬化鏈 | (SHORT-LINK AND VERY SHORT-LINK CALIBRATED LOADING CHAINS FOR HOISTING BEAR. CHAINS WITH A HERDENED SURFACE.) |
| NF E29-577 | 管道.工具和氣動機械用的螺紋連接管 | (PIPEWORKS. SCREWED CONNECTIONS FOR PNEUMATIC TOOLS AND MACHINES.) |
| NF E29-791 | 可移動儲氣瓶.乙炔蓄電池運載工具的灌裝條件 | (Transportable gas cylinders - Filling conditions for acetylene battery vehicles.) |
| NF E51-200 | 壓縮機,氣壓工具和機械.常用詞匯 | (Compressors, pneumatic tools and machines. General vocabulary.) |
| NF E51-201 | 壓縮機.工具和氣壓機械.壓縮機詞匯 | (Compressors, pneumatic tools and machines. Vocabulary of compressors.) |
| NF E51-202 | 壓縮機、風動工具和機械.詞匯.風動工具和機械 | (Compressors, pneumatic tools and machines. Vocabulary. Pneumatic tools and machines.) |
| NF E51-361 | 螺紋緊固件用旋轉式氣動裝配工具.性能試驗 | (Rotary tools for threaded fastners. Performance test method.) |
| NF E60-021 | 機床切削工具.速度和走刀量 | (Machine-tools. speeds and feeds.) |
| NF E60-023 | 人工換刀7:24錐度工具錐柄 | (7/24 tapers for tool skanks for manual changing.) |
| NF E60-096 | 機械工具試驗規程.第4部分:數字型控制機械工具循環試驗 | (TEST CODE FOR MACHINE-TOOLS. PART 4 : CIRCULAR TESTS FOR NUMERICALLY CONTROLLED MACHINE TOOLS.) |
| NF E60-097 | 實驗規則和機械工具.第2部分:數控軸位置的精度和重復性的測定 | (Test code for machine tools. Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes.) |
| NF E60-134-1 | 機械工具.沖模放電機器的試驗條件.術語和精度試驗.第1部分:單柱機 | (Machines tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1 : single column machines (cross slide table type and fixed table type).) |
| NF E60-134-2 | 機械工具.沖模放電機器的試驗條件.術語和精度試驗.第2部分:雙柱機 | (Machines tools - Test conditions for die sinking electro-discharge machines (EDM) -Terminology and testing of the accuracy - Part 2 : two column machines (slide-head type and cross-slide table type).) |
| NF E60-172-9 | 組合加工中心機床的試驗條件.第9部分:工具和墊板轉換的操作時間的評價 | (Test conditions for machining centres - Part 9 : evaluation of the operating times of tool change and pallet change.) |
| NF E62-110 | 車床切削工具.軸頭和面板.可互換性尺寸.第2部分:凸輪鎖型 | (Machine-tools. Spindle noses and face plates . Sizes for interchangeability. Part 2 : camlock type.) |
| NF E62-208 | 機床切削工具結構用標準化構件.圓柱用翅基 | (Modular units for machine-tools construction. Wing base for columns.) |
| NF E62-209 | 機床切削工具結構用標準化構件.安裝多軸頭用榫舌驅動和法蘭 | (Modular units for machines-tools construction. Tenon drive and flanges for mounting multi-spindle heads.) |
| NF E62-522 | 桿傳動帶７／２４錐度工具用外錐度為７／２４轉接器 | (REDUCTION SLEEVES WITH TENON DRIVE WITH EXTERNAL AND INTERNAL 7/24 TAPER.) |
| NF E62-528 | 帶桿的莫氏錐度工具用外錐度為７／２４轉接器 | (REDUCTION SLEEVES WITH EXTERNAL 7/24 TAPER FOR TOOLS WITH TANGED MORSE TAPER SHANKS.) |
| NF E62-541 | 工具自動變換工具用的連接錐.錐體Ｎ度４０，４５，５０的７／２４錐度工具柄的拉制接頭 | (Tool shank taper rate 7/24 for automatic tool changer. Retention knobs for shanks no 40, 45, 50.) |
| NF E62-550 | 錐度為7/24的自動更換工具用的工具手柄.圓錐形主軸突出部分 | (7/24 tapers for tool shanks for automatic changing. Taper for spindle noses.) |
| NF E63-052 | 壓力機配套工具.柱上的環形件 | (PRESS TOOLS. PILLAR KEEPER RING.) |
| NF E63-053 | 壓力機配套工具.中間定位柱的法蘭盤 | (PRESS TOOLS.FLANGE FOR MIDDLE LOCATING PILLAR.) |
| NF E63-054 | 壓力機配套工具.連接導環 | (PRESS TOOLS.PILLAR GUIDE BUSH.) |
| NF E63-055 | 壓力機配套工具.安裝在底座上的連接導環 | (PRESS TOOLS.PILLAR GUIDE BUSH FOR MOUNTING IN BOLSTER.) |
| NF E63-056 | 壓力機配套工具.密封導環 | (PRESS TOOLS.FIXED GUIDE BUSH.) |
| NF E63-057 | 壓力機配套工具.連接環的止動法蘭盤 | (PRESS TOOLS.RETAINING FLANGE FOR GUIDE BUSH.) |
| NF E63-060 | 壓制用工具.抗模板.通用規范 | (TOOLS FOR PRESSING. WEAR PLATES. GENERAL SPECIFICATIONS.) |
| NF E63-076 | 壓力機配套工具.導向部件.自動潤滑油環 | (PRESS TOOLS - GUIDING ELEMENTS - SELF-OILING RINGS.) |
| NF E63-080 | 沖壓工具.沖模 | (Tools for pressing - Matrixes.) |
| NF E63-081 | 壓力機配套工具.各種型孔模型 | (PRESS TOOLS. DIES FOR SHAPE HOLES.) |
| NF E63-090 | 壓力工具.壓實件 | (TOOLS FOR PRESSING. DIE SETS.) |
| NF E63-100 | 沖壓工具.有圓柱頭和直桿或者縮徑柄的沖頭 | (Tools for pressing - Punches with cylindrical head and straight or reduced shank.) |
| NF E63-101 | 壓力機配套工具.有凸緣的陽模凹座 | (PRESS TOOLS-COLLAR PUNCH HOUSINGS.) |
| NF E63-102-1 | 壓印工具.球鎖式?jīng)_壓.第1部分:輕型球鎖式?jīng)_壓 | (Tools for pressing - Ball-lock punches - Part 1 : ball-lock punches for light duty.) |
| NF E63-109 | 壓力機配套工具.６０°錐形頭沖切模 | (Press tools. Punches with 60 degrees conical head.) |
| NF E63-113 | 沖壓工具.帶凸緣沖頭矩形固定板和擋板 | (PRESS TOOLS. RECTANGULAR RETAINERS AND PERCUSSION PLATE FOR FLANGED PUNCHES. TOP FIXING.) |
| NF E63-114 | 沖壓工具.帶凸緣沖頭正方形固定板和擋板 | (PRESS TOOLS. SQUARE RETAINERS AND PERCUSSION PLATES FOR FLANGED PUNCHES. TOP FIXING.) |
| NF E63-115 | 壓機配套工具.帶60°錐形頭和凸肩的圓沖頭 | (TOOLS FOR PRESSING. ROUND PUNCHES WITH 60 DEGREES C CONICAL HEAD AND REDUCED SHANK.) |
| NF E63-119 | 壓力機配套工具.陽模.定義.陽模的主要型號.術語 | (PRESS TOOLS. PUNCHES. DEFINITIONS OF PRINCIPAL TYPES OF PUNCH. TERMINOLOGY.) |
| NF E63-120 | 壓力機配套工具.滾珠導套.滾珠導套的安裝 | (PRESS TOOLS. BALL GUIDES. BALL GUIDE MOUNTING.) |
| NF E63-123 | 壓力機配套工具.滾珠導套和滑動導套.凸緣肩軸襯和螺紋凸肩環 | (Press tools. Guide bushing. Shouldered clamping and shouldered threaded bushes.) |
| NF E63-124 | 壓力機配套工具.滾珠導套.滾珠軸承隔離套 | (PRESS TOOLS. BALL GUIDES. BALL CAGE.) |
| NF E63-125 | 壓力機配套工具.滾珠導套.配件 | (PRESS TOOLS. BALL GUIDES. ACCESSORIES.) |
| NF E63-131-2 | 壓力工具.氣壓彈簧.第2部分:附屬規范 | (Tools for pressing. Gas springs. Part 2 : specification of accessories.) |
| NF E63-132 | 壓機配套工具.調整桿.尺寸 | (TOOLS FOR PRESSING. RING BOLT. DIMENSIONS.) |
| NF E63-134 | 壓制工具.合成橡膠壓力彈簧.第1部分:一般規范 | (Tools for pressing. Elastomer pressure springs. Part 1 : general specification.) |
| NF E63-135 | 壓制工具.合成橡膠壓力彈簧.第2部分:附件的規范 | (Tools for pressing. Elastomer pressure springs. Part 2 : specification of accessories.) |
| NF E63-136 | 壓制工具.矩形截面壓力彈簧.骨架尺寸和色彩編碼 | (Tools for pressing. Compression springs with rectangular section. Housing dimensions and colour coding.) |
| NF E63-137 | 沖壓工具.中壓預壓縮裝置.一般規范 | (PRESS-TOOLS. PRECOMPRESSED ASSEMBLIES FOR MEDIUM RATE. GENERAL SPECIFICATIONS.) |
| NF E63-141 | 壓力工具.彈簧拆卸器 | (TOLLS FOR PRESSING. SPRING EJECTOR.) |
| NF E63-376 | 鑄模用工具.鑄模基座.圓形定位元件和墊片 | (Tools for moulding - Mould bases - Round locating elements and spacers.) |
| NF E63-502 | 鑄造和壓力工具.機械薄板.第一部分:機械壓力薄板.選礦器和固定物 | (Tools for pressing and moulding. Machined plates. Part 1 : machined plates for press tools, jigs and fixtures.) |
| NF E63-509-2 | 鑄模工具.定位環狀物.第2部分:在小型或中型模子中無鑲嵌隔熱板的定位環狀物.C型和D型 | (Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - Types C and D.) |
| NF E63-510 | 模壓工具.澆道套.尺寸 | (Tools for moulding. Sprue bushes. Dimensions.) |
| NF E63-516 | 鑄造工具.中心套筒 | (Tools for moulding. Centring sleeves.) |
| NF E63-518 | 模壓工具.支承柱 | (Tools for moulding. Support pillars.) |
| NF E63-521 | 注模工具.壓縮元件和注模和沖壓注模.術語和符號 | (Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols.) |
| NF E63-522 | 模制工具.噴模用熱絕緣薄板材 | (Tools for moulding - Thermal insulating sheets for injection moulds.) |
| NF E64-114 | 木材加工機械.擺動工具開榫機.術語 | (WOODWORKING MACHINES. MORTISING MACHINES WITH OSCILLATING TOOL ACTION. NOMENCLATURE.) |
| NF E64-601-1 | 木材加工機械的安全.帶有旋轉工具的單邊制模機械.第1部分:單轉軸垂直制模機(歐洲標準 EN 848-1) | (Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines.) |
| NF E64-601-1/A1 | 木材加工機械的安全.帶有旋轉工具的單邊注模機器.第1部分:單心軸垂直注模機 | (Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines.) |
| NF E65-100-1 | 手持非電動工具.安全要求.第1部分:非螺紋機器緊固件的組件動力工具 | (Hand-held non-electric power tools - Safety requirements - Part 1 : assembly power tools for non-threaded mechanical fasteners.) |
| NF E65-100-10 | 手持非電動工具.安全要求.第10部分:壓縮動力工具 | (Hand-held non electric power tools - Safety requirements - Part 10 : compression power tools.) |
| NF E65-100-11 | 手持非電動工具.安全要求.第11部分:毛坯下料機和剪切機 | (Hand-held non-electric power tools - Safety requirements - Part 11 : nibblers and shears.) |
| NF E65-100-12 | 手持非電動工具.安全要求.第12部分:小型環形擺動往復鋸 | (Hand-held non-electric power tools - Safety requirements - Part 12 : small circular, small oscillating and reciprocating saws.) |
| NF E65-100-13 | 手持非電動工具.安全要求.第13部分:緊固工具 | (Hand-held non-electric power tools - Safety requirements - Part 13 : fastener driving tools.) |
| NF E65-100-2 | 手持非電動工具.安全要求.第2部分:切割和彎折工具 | (Hand-held non-electric power tools - Safety requirements - Part 2 : cutting-off and crimping power tools.) |
| NF E65-100-3 | 手持非電動工具.安全要求.第3部分:鉆孔機和攻絲機 | (Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers.) |
| NF E65-100-4 | 手持非電動工具.安全要求.第4部分:非旋轉敲擊動力工具 | (Hand-held non-electric power tools - Safety requirements - Part 4 : non-rotary percussive power tools.) |
| NF E65-100-5 | 手持非電動工具.安全要求.第5部分:旋轉敲擊動力鉆 | (Hand-held non-electric power tools - Safety requirements - Part 5 : rotary percussive drills.) |
| NF E65-100-6 | 手持非電動工具.安全要求.第6部分:螺紋緊固件組件動力工具 | (Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners.) |
| NF E65-100-7 | 手持非電動工具.安全要求.第7部分:磨床 | (Hand-held non-electric power tools - Safety requirements - Part 7 : grinders.) |
| NF E65-100-8 | 手持非電動工具.安全要求.第8部分:打磨器和拋光器 | (Hand-held non-electric power tools - Safety requirements - Part 8 : sanders and polishers.) |
| NF E65-100-9 | 手持式非電動工具.安全要求.第9部分:模研磨機 | (Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders.) |
| NF E65-110 | 手持非電動工具.噪聲測量規定.工程法(2級) | (Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2).) |
| NF E65-115 | 聲學.緊固件傳動工具用噪聲試驗規范.工程法 | (Acoustics - Noise test code for fastener driving tools - Engineering method.) |
| NF E66-322 | 車床工具.帶硬金屬釬焊刀片的自動車刀 | (Turning tools. Tools with hardmetal inserts for turning on automatic machines.) |
| NF E66-405 | 空氣錘工具的連接 | (Shanks for pneumatic hammers.) |
| NF E66-500 | 切削工具.高速鋼組名稱與符號 | (Cutting tools. Designation of high speed steel groups.) |
| NF E66-502 | 切削和研磨的基本量.第一部分:切削工具工作部分幾何結構.一般術語:參照系統、工作角度、斷屑臺 | (Basic quantities in cutting and grinding. Part 1 : geometry of the active part of cutting tools. General tems, reference systems, tool and working angles, chip breakers.) |
| NF E66-520-7 | 切割工具的工作帶.雙工具材料.第7部分:對固態鉆孔技術的應用 | (Working zones of cutting tools - Couple tool-material - Part 7 : application to drilling technology on solid.) |
| NF E66-520-8 | 切割工具的工作帶.雙工具材料.第8部分:在平面上鉆孔的雙工具材料方法學 | (Working zones of cutting tools - Couple tool-material - Part 8 : couple tool-material methodology in drilling on plain.) |
| NF E66-531 | 機床.工具手柄自動夾緊拔銷 | (Machine tools. Self-holding tapers for tool shanks.) |
| NF E66-533 | 機床切削工具.莫氏錐度柄.帶斜鍵的銷槽 | (Machine-tools. Morse taper shanks. Cotter slots with taper keys.) |
| NF E66-550-1 | 帶圓柱柄的工具夾.第1部分:圓柱狀柄,定位鏜孔.技術交貨條件 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 1 : CYLINDRICAL SHANK, LOCATION BORE. TECHNICAL DELIVERY CONDITIONS.) |
| NF E66-550-2 | 帶圓柱柄的工具夾.第2部分:A型,特殊設計的工具夾柄 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 2 : TYPE A, SHANKS FOR TOOL HOLDERS OF SPECIAL DESIGNS.) |
| NF E66-550-3 | 帶圓柱柄的工具夾.第3部分:B型帶矩形放射狀底座的工具夾 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 3 : TYPE B WITH RECTANGULAR RADIAL SEAT.) |
| NF E66-550-4 | 帶圓柱柄的工具夾.第4部分:C型帶矩形軸狀底座的工具夾 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 4 : TYPE C WITH RECTANGULAR AXIAL SEAT.) |
| NF E66-550-5 | 帶圓柱柄的工具夾.第5部分:帶多于一個矩形底座的D型工具夾 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 5 : TYPE D WITH MORE THAN ONE RECTANGULAR SEAT.) |
| NF E66-550-6 | 帶圓柱柄的工具夾.第6部分:帶圓柱狀底座的E型工具夾 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 6 : TYPE E WITH CYLINDRICAL SEAT.) |
| NF E66-550-7 | 帶圓柱柄的工具夾.第6部分:帶錐形底座的F型工具夾 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 7 : TYPE F WITH TAPER SEAT.) |
| NF E66-550-8 | 帶圓柱柄的工具夾.第8部分:Z型,附件 | (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 8 : TYPE Z, ACCESSORIES.) |
| NF E71-001 | 錘打和鉚接工具.術語.名稱 | (TOOLS FOR HAMMERING,HITTING AND RIVETTING. TERMINOLOGY. NOMENCLATURE.) |
| NF E71-213 | 鍛造和有關成套工具.沖子.尺寸.規范 | (TOOLS FOR HAMMERING,HITTING AND RIVETING. WALL-DRILLS. DIMENSIONS. SPECIFICATIONS.) |
| NF E73-201 | 木工工具.鑿子和半圓鑿 | (Woodworking tools. Chisels and gouges.) |
| NF E73-303 | 木工工具.木體刨 | (Woodworking tools. Wooden bodied planes.) |
| NF E73-304 | 木工工具.金屬臺刨、刨刀和蓋鐵 | (Woodworking tools. Metal-bodied bench planes, plane cutters and cap irons.) |
| NF E73-521-2 | 木工工具.安全要求.第2部分:支架固定銑刀的支架要求 | (Tools for woodworking - Safety requirements - Part 2 : requirements for the shank of shank mounted milling tools.) |
| NF E74-300 | 螺栓和螺母用裝配工具.扳手和套筒扳手的開口.通用公差 | (Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.) |
| NF E74-303 | 螺釘和螺母組裝工具.鍛造的和管形套筒扳手.頭部外形最大尺寸 | (Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.) |
| NF E74-304 | 螺釘和螺母裝配工具.雙頭開口扳手、雙頭環形扳手和多用扳手.端部最大寬度 | (Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.) |
| NF E74-305 | 螺釘和螺母裝配工具.雙頭扳手.尺寸選配 | (Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.) |
| NF E74-307 | 螺釘和螺母用裝配工具.組合扳手.扳手長度和端口最大厚度 | (Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.) |
| NF E74-310 | 螺釘和螺母用裝配工具.工程用雙頭開口扳手.扳手長度和端口厚度 | (Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-311 | 螺釘和螺母用裝配工具.雙頭平直套筒扳手和斜口套筒扳手.扳手長度和端口厚度 | (Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-313 | 螺釘和螺母用裝配工具.雙頭深斜口套筒扳手和改進的斜口套筒扳手.扳手長度和端口厚度 | (Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-321 | 螺釘和螺母用裝配工具.十字形套筒扳手.尺寸和扭矩試驗 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.) |
| NF E74-322 | 螺釘螺帽緊固工具.齒條式扳手 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.) |
| NF E74-323 | 螺釘螺帽緊固工具.開槽螺帽用單鉤扳手 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES) |
| NF E74-324 | 螺釘和螺母用裝配工具.可調扳手 | (Assembly tools for screws and nuts - Adjustable wrenches.) |
| NF E74-325 | 螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法 | (Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.) |
| NF E74-331 | 螺釘和螺母用裝配工具.內六角扳手 | (Assembly tools for screws and nuts - Hexagon socket screw keys.) |
| NF E74-351 | 螺釘和螺母用裝配工具.一字槽頭螺釘用旋具.第2部分:手工操作旋具的一般要求、刀刃長度和標記 | (Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.) |
| NF E74-352 | 螺釘和螺母用裝配工具.槽螺釘用旋具.第1部分:手工及機械操作用的旋具頭 | (Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.) |
| NF E74-353-1 | 螺釘和螺母用裝配工具.機動旋轉頭.第1部分:一字槽螺釘旋具 | (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.) |
| NF E74-353-2 | 螺釘和螺母用裝配工具.機動旋轉頭.第2部分:十字槽螺釘旋具頭 | (Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.) |
| NF E74-353-3 | 螺釘和螺母用裝配工具.機動旋轉頭.第3部分:內六角螺釘用旋具頭 | (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.) |
| NF E74-354 | 螺釘和螺母用裝配工具.螺旋棘輪螺釘旋具頭.尺寸 | (Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.) |
| NF E74-360 | 螺釘和螺母用裝配工具.手動和機動螺絲刀的驅動端和連接部件.尺寸和扭矩試驗 | (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.) |
| NF E74-361 | 螺釘和螺母用裝配工具.方形旋具.第1部分:手動套筒工具用方形旋具 | (Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.) |
| NF E74-362 | 螺釘和螺母用裝配工具.方形旋具.第2部分:電動套筒工具用方形旋具 | (Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.) |
| NF E74-363-1 | 螺釘和螺母用裝配工具.方形傳動套筒.第1部分:手動套筒.尺寸 | (Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.) |
| NF E74-363-2 | 螺釘和螺母用裝配工具.方形傳動套筒.第2部分:機動“沖擊“套筒.尺寸 | (Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.) |
| NF E74-363-3 | 螺釘和螺母用組合工具.方形驅動套筒.第3部分:機器驅動套筒(無沖擊).尺寸 | (Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.) |
| NF E74-365 | 螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的傳動件.尺寸和試驗 | (Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-366 | 螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的附件.尺寸和試驗 | (Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-367 | 螺釘和螺母用裝配工具.機動插頭扳手的方塊傳動加長六角插頭 | (Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.) |
| NF E74-381 | 螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒 | (Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.) |
| NF E78-003 | 工具柄.鏟和圓眼鎬 | (TOOL FIT. ROUND HOLED SHOVELS AND PICK AXES.) |
| NF E90-320 | 便攜式手提電動工具.手柄振動的測量.第1部分:總則 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 1 : general.) |
| NF E90-321-1 | 手持便攜式動力工具.測量手柄的顫動.第四部分:磨床 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 4 : grinders.) |
| NF E90-321-2 | 便攜式手提動力工具.手柄振動測量.第8部分:軌道和隨機軌道拋光及旋轉砂輪機 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 8 : polishers and rotary, orbital and random orbital sanders.) |
| NF E90-321-3 | 便攜式手提動力工具.第321部分:手柄振動測量.第3節:模具研模機 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 13 : die grinders.) |
| NF E90-322-1 | 便攜式手提動力工具.手柄振動的測量.第2部分:鑿錘和鉚釘錘 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 2 : chipping hammers and riveting hammers.) |
| NF E90-322-1/A2 | 便攜式手提動力工具.手柄振動的測量.第2部分:鑿錘和鉚釘錘 | (Hand-held portable power tools - Measurement of vibrations at the handle - Part 2 : chipping hammers and riveting hammers.) |
| NF E90-322-2 | 便攜式手提動力工具.手柄振動的測量.第5部分:施工用路面軋碎機和錘 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 5 : pavement breakers and hammers for construction work.) |
| NF E90-322-2/A2 | 便攜式手提電動工具.手柄振動的測量.第5部分:建筑工程用柏油路破碎機和鏨平錘 | (Hand-held portable power tools - Measurement of vibrations at the handle - Part 5 : pavement breakers and hammers for construction work.) |
| NF E90-322-3 | 便攜式手提電動工具.手柄振動的測量.第9部分:夯實機 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 9 : rammers.) |
| NF E90-323 | 便攜式手提電動工具.手柄振動的測量.第3部分:巖石鉆頭和旋轉錘 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 3 : rock drills and rotary hammers.) |
| NF E90-323/A2 | 便攜式手提動力工具.手柄振動的測量. 第3部分:巖石鉆頭和旋轉錘 | (Hand-held portable power tools - Measurement of vibrations at the handle - Part 3 : rock drills and rotary hammers.) |
| NF E90-324 | 便攜式手提動力工具.手柄振動的測量.第六部分:沖擊鉆孔 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 6 : impact drills.) |
| NF E90-325 | 便攜式手提動力工具.手柄振動測量.第7部分:扳手,旋具與具有沖擊,沖力和刻踞齒作用的螺紋滾子 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 7 : wrenches, screwdrivers and nut runners with impact, impulse or ratchet action.) |
| NF E90-326 | 便攜式手提動力工具.手柄振動的測量.第14部分:石工用具和針式定標器 | (Hand-held portable power tools. Measurement of vibrations at the hangle. Part 14 : stone-working tools and needle scalers.) |
| NF E90-327 | 便攜式手提動力工具.手柄振動測量.第10部分:步?jīng)_輪廓機和剪切機械 | (Hand-held portable power tools - Measurement of vibrations at the handle - Part 10 : nibblers and shears.) |
| NF E90-328 | 便攜式手提動力工具.手柄振動測量.第12部分:有往復作用的鋸和銼及有擺動或旋轉作用的鋸 | (Hand-held portable power tools. Measurement of vibrations at the handle. Part 12 : saws and files with reciprocating action and saws with oscillating or rotating action.) |
| NF F11-910-2 | 鐵路設施.制動.公共交通工具制動系統.第2部分:試驗方法 | (Railway applications - Braking - Mass transit brake systems - Part 2 : methods of test.) |
| NF F19-510 | 鐵路工具.軸箱.潤滑油 | (Railway applications. Axleboxes. Lubricating greases.) |
| NF F76-003 | 鐵路固定設備.道路用工具.枕木鉗 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. SLEEPER LIFTER.) |
| NF F76-006 | 鐵路固定設備.軌道設備和修理工具.軌道移動杠桿 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. RAIL MOVING LEVER.) |
| NF F76-008 | 鐵路固定設備.軌道設備和修理工具.短打夯機 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. SHORT TAMPING RAMMER.) |
| NF F78-001 | 鐵路運輸器材.F ７８運營專用工具索具.桶和客車用楔 | (RAILWAY TRANSPORT EQUIPMENT. GENERAL TACKLE. CHOCKS FOR BARRELS AND VEHICLES.) |
| NF F79-001 | 通用鐵路設備.F ７９多種用道工具信號旗.三角旗鐵路用金屬產品和半成品 | (Railway material in general. Signal flags. Pennants.) |
| NF H34-015 | 塑料包裝.消費品塑料袋（工具袋和安全帶袋除外）規范和試驗 | (PLASTIC PACKAGING. BAGS FOR CONSUMER PRODUCTS (EXCEPT CARRIER AND SHOPPING BAGS). SPECIFICATIONS AND TESTS.) |
| NF J83-206 | 內河航行運載工具.客輪通道.要求和試驗 | (Inland navigation vessels - Gangways for passenger vessels - Requirements, tests.) |
| NF L09-101 | 航空和航天.制造和檢驗.工具分類計劃和鑒定標準 | (Aircraft and space vehicles. Manufacture and control. Part number and classification plan of toolings.) |
| NF L54-002-076 | 航空航天系列.電氣及光學連接元件.試驗方法.第506部分:工具的使用 | (Aerospace series - Elements of electrical and optical connection - Test methods - Part 506 : use of tools.) |
| NF L54-131 | 電接觸點插拔工具 | (INSERTION AND EXTRACTION TOOL FOR ELECTRICAL CONTACTS.) |
| NF L91-002-3 | 航空器地面保障設備.特殊要求.第3部分:傳送帶運載工具 | (Aircraft ground support equipment - Specific requirements - Part 3 : conveyor belt vehicles.) |
| NF M82-011 | 煤礦器材和工具.煤礦器材.風扇型通風管軟管道.規范 | (Mining equipment. Flexible venting ducts. Ventubes of the blowing type. Specifications.) |
| NF M82-013 | 煤礦器材和工具.煤礦器材.吸入型通風管軟管道.規范 | (MINING EQUIPMENT. FLEXIBLE VENTING DUCTS. VENTUBES OF THE SUCTION TYPE. SPECIFICATIONS.) |
| NF M82-237 | 煤礦器材和工具.煤礦器材和工具.壓縮空氣管.變徑管接頭 | (MINING EQUIPMENT. COMPRESSED AIR PIPES. CONICAL REDUCTION COUPLINGS.) |
| NF P94-430-1 | 巖石.巖石磨耗性的測定.第1部分:使用指定工具的schratching試驗 | (Rock - Determination of the rock abrasiveness - Part 1 : schratching-test with a pointed tool.) |
| NF P94-430-2 | 巖石.巖石磨耗性的測定.第2部分:使用旋轉工具的試驗 | (Rock - Determination of the rock abrasiveness - Part 2 : test with a rotating tool.) |
| NF P98-737 | 道路結構和維修設備.壓實工具.額定壓實性能 | (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. COMPACTOR. RATING COMPACTION PERFORMANCES.) |
| NF R63-201 | 道路車輛.汽車車庫工具.測量和檢驗工具 | (ROAD VEHICLES. GARAGE EQUIPMENT. ENGINE TESTING AND MEASURING EQUIPMENT.) |
| NF R63-202 | 道路車輛.汽車車庫工具.發動機RPM轉速計.總規范 | (Road vehicles - Garage equipment - Engine RPM tachometer - General specifications.) |
| NF R63-301 | 道路車輛.汽車車庫工具.推進裝置幾何測量設備 | (ROAD VEHICLES. GARAGE EQUIPMENT. GEOMETRY CONTROL DEVICES FOR RUNNING GEAR.) |
| NF R63-304 | 道路車輛.汽車車庫工具.轉動平臺 | (ROAD VEHICLES. GARAGE EQUIPMENT. SWIVEL-PLATE.) |
| NF R63-703 | 道路車輛.車庫工具.步數計 | (ROAD VEHICLES. GARAGE EQUIPMENT. PEDOMETERS.) |
| NF R63-705 | 道路車輛.汽車車庫工具.自錄式減速計 | (ROAD VEHICLES. GARAGE EQUIPMENT. RECORDING DECELEROMETERS.) |
| NF R63-801 | 道路車輛.汽車車庫工具.照明燈校正設備 | (ROAD VEHICLES. GARAGE EQUIPMENT. EQUIPMENT FOR CHECKING AND ADJUSTING LIGHTS.) |
| NF S61-509-3 | 消防和援救用運載工具.第3部分:永久性安裝設備.安全和性能 | (Firefighting and rescue service vehicles - Part 3 : permanently installed equipment - Safety and performance.) |
| NF S61-571 | 救護和消防的設備.液壓?jiǎn)蝿?dòng)器具和切割工具.特性.尺寸、功能和試驗 | (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED DOUBLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.) |
| NF S61-572 | 救護和消防的設備.液壓?jiǎn)蝿?dòng)器具和切割工具.特性.尺寸、功能和試驗 | (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED SINGLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.) |
| NF S71-601 | 救生衣和專用浮力工具.浮力工具.50N(歐洲標準EN 393) | (Lifejackets and personal buoyancy aids. Buoyancy aids 50 N.) |
| NF S71-602 | 救生衣和專用浮力工具.附加零件 | (Lifejackets and personal buoyancy aids. Additional items.) |
| NF S71-604 | 救生衣和專用浮力工具.150N救生衣 | (Lifejackets and personal buoyancy aids. Lifejackets 150 N.) |
| NF S71-605 | 救生衣和專用浮力工具.275N救生衣 | (LIFEJACKETS AND PERSONAL BUOYANCY AIDS. LIFEJACKETS. 275 N. (EUROPEAN STANDARD EN 399).) |
| NF S91-130 | 牙科用旋轉器械.切割工具.第3部分:銑床用硬質合金實驗室刀具 | (Dental rotary instruments. Cutters. Part 3 : carbide laboratory cutters for milling machines.) |
| NF S94-002 | 用于有關非活性外科植入物的工具 | (Instrumentation to be used in association with non-active surgical implants. General requirements.) |
| NF T35-013 | 涂料和清漆涂刷和干燥器具.涂料制備和使用工具用清潔設備的打開裝置和關閉機械.設計、工作性能和測量方法 | (INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. OPEN EQUIPMENTS AND CLOSED MACHINES FOR CLEANING EQUIPMENTS FOR PREPARATION AND APPLICATION OF PAINTS. DESIGN,WORKING,CHARACTERISTICS AND MEASUREMENT METHODS.) |
| NF T35-504-3 | 涂料和有關產品使用前鋼襯底的制備.表面制備方法.第3部分:手工工具和電動工具清洗 | (Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3 : hand- and power-tool cleaning.) |
| NF T60-509 | 潤滑劑、工業潤滑油和類似產品(L級).分類.第11部分:P類(風動工具) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 11 : FAMILY P (PNEUMATIC TOOLS).) |
| NF U14-505 | 農用拖拉機和全套工具.四點剛性聯結器規范 | (Agricultural tractors and implements. Four-point rigid hitch. Specifications.) |
| NF U34-136 | 林業機械.動力桿式修枝鋸的安全要求和試驗.第2部分:帶有背裝電源裝置的切削工具 | (Machinery for forestry - Safety requirements and testing for pole mounted powered pruners - Part 2 : units for use with a back pack power unit.) |
| NF X50-711 | 商品的標準化過程.工具目錄和描述 | (The standardization process in firm. Inventory and description of tools.) |
| NF Z71-357 | 信息技術.TED.網絡協議.通過電子郵件系統的應用工具軟件之間的文件轉換 | (INFORMATION TECHNOLOGY. TED.NET PROTOCOL. FILES EXCHANGE BETWEEN APPLICATIONS BY ELECTRONIC MAIL SYSTEMS.) |
| NF Z82-132 | 綜合業務數字網(ISDN).電信業務中用的加密工具(SET) | (Integrated Services Digital Network (ISDN) - Security tools (SET) for use within telecommunication services.) |
| NF Z82-502-1 | 綜合業務數字網(ISDN).安全工具(SET)程序.數字用戶信令系統No.1(DSS1)協議.第1部分:協議規范 | (Integrated Services Digital Network (ISDN) - Security tools (SET) procedures - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1 : protocol specification.) |
| 編號 | 中文名稱 | 英文名稱 |