微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BIP 0026 | 實現ISMS BS ISO/IEC 27001文獻工具包CD-ROM.包括對數據安全和BS 7779/ISO 17799的管理者指南 | Complete ISMS BS ISO/IEC 27001 documentation toolkit CD-ROM - Including The Manager's guide to data security and BS 7779/ISO 17799 |
| BIP 3001 | 絕緣玻璃裝置的CE標記.生產者的成套工具 | CE marking of insulating glass units - Manufacturer's toolkit |
| BS 1660-1 | 機器用圓錐.第1部分:自動夾緊的(莫氏錐度和5%米制錐度)圓錐工具柄和套筒規范 | Machine tapers - Specification for shanks and sockets with self-holding tapers (Morse and metric 5%) |
| BS 1983-1 | 機床與便攜式電動工具用卡盤規范.刀具夾緊卡盤 | Specification for chucks for machine tools and portable power tools - Tool-holding chucks |
| BS 1983-3 | 機床與便攜電動工具用卡盤規范.第3部分:電動工件卡盤的底爪用彈性?shī)A頭墊尺寸規范 | Chucks for machine tools and portable power tools - Specification for dimensions of collet pads for base jaws of power operated workholding chucks |
| BS 1983-4 | 機床與便攜電動工具用卡盤規范.第4部分:影響電動工作狀態卡盤性能的準則說明規范 | Chucks for machine tools and portable power tools - Specification of criteria to be stated affecting performance of power operated workholding chucks at speed |
| BS 1983-5 | 機床與便攜式電動工具用卡盤規范.第5部分:車床工作狀態卡盤的安全操作實用規程 | Chucks for machine tools and portable power tools - Code of practice for the safe operation of workholding chucks used on lathes |
| BS 2769-2.14 | 手持電動工具.特殊要求.樹籬修整器及草坪剪刀規范. | Hand-held electric motor-operated tools - Particular requirements - Specification for hedge trimmers and scissor-type grass shears |
| BS 3066 | 工程用冷鑿及相關工具規范 | Specification for engineers' cold chisels and allied tools |
| BS 3087-10 | 夾扭鉗和剪斷鉗.第10部分:非ISO標準工具尺寸規范 | Pliers and nippers - Specification for dimensions of tools not standardized by ISO |
| BS 3486-1 | 農用機械.第1部分:工具用輪子的規格:車輪輪輞固定尺寸規格 | Specification for wheels for agricultural machinery, implements and trailers - Specification for wheel-to-hub fixing dimensions |
| BS 3821-1 | 硬質合金模具和配套硬質合金工具規范.第1部分:燒結模坯和精加工模名稱與標記 | Specification for hardmetal dies and associated hardmetal tools - Designation and marking of as-sintered pellets and finished dies |
| BS 3821-2 | 硬質合金模具和配套硬質合金工具規范.第2部分:拉制圓金屬絲用燒結模坯和精加工模 | Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round wire |
| BS 3821-3 | 硬質合金模具和配套硬質合金工具規范.第3部分:拉制圓棒材用燒結模坯和精加工模 | Specification for hardmetal dies and associated hardmetal tools - As-sintered pellets and finished dies for drawing round bar |
| BS 3821-4 | 硬質合金模具和配套硬質合金工具規范.第4部分:頂鍛模用硬質合金燒結模坯尺寸和公差 | Specification for hardmetal dies and associated hardmetal tools - Dimensions and tolerances of as-sintered hardmetal pellets used in heading dies |
| BS 3823 | 手工工具用槐木和山核桃木柄的分級 | Grading of ash and hickory wood handles for hand tools |
| BS 4078 Pt.2 | 火藥驅動射釘裝置.第2部分:工具規范 | Powder actuated fixing systems. Specification for tools |
| BS 4078-2 | 火藥作動固定系統.第2部分:工具規范 | Powder actuated fixing systems - Specification for tools |
| BS 4193-13 | 硬質合金鑲齒工具.第13部分:帶圓角可轉位硬質金屬鑲齒.部分圓柱型固定孔.尺寸 | Hardmetal insert tooling - Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions |
| BS 4361-25 | 木工機械.第25部分:萬能工具和刀具刃磨機命名 | Woodworking machines - Nomenclature for universal tool and cutter sharpeners |
| BS 5344 | 旋轉和沖擊氣動工具的性能試驗方法 | Methods for performance tests for rotary and percussive pneumatic tools |
| BS 5791-1 | 壓縮機、氣動工具和氣動機械術語.第1部分:總則 | Glossary of terms for compressors, pneumatic tools and machines - General |
| BS 5791-2 | 壓縮機、氣動工具和氣動機械術語.第2部分:壓縮機 | Glossary of terms for compressors, pneumatic tools and machines - Compressors |
| BS 5791-3 | 壓縮機、氣動工具和機械術語.第3部分:氣動工具與機械 | Glossary of terms for compressors, pneumatic tools and machines - Pneumatic tools and machines |
| BS 5G 178-1 | 飛機電纜和電線用壓合連接器.第1部分::元件和工具設計要求(包括試驗)規范 | Crimped joints for aircraft electrical cables and wires - Specification for design requirements (including tests) for components and tools |
| BS 6268 | 安裝螺紋緊固件用手持氣動裝配工具反作用扭矩及扭矩沖力測量方法 | Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners |
| BS 6416 | 螺釘與螺母裝配工具術語 | Nomenclature for assembly tools for screws and nuts |
| BS 673 | 氣動工具柄桿和夾盤套筒配合尺寸規范 | Specification for shanks for pneumatic tools and fitting dimensions of chuck bushings |
| BS 6911-2 | 運土機械試驗.第2部分:裝載機工具強度和翻倒載荷的測量 | Testing earth-moving machinery - Measurement of tool forces and tipping loads of loaders |
| BS 6911-3 | 運土機械試驗.第3部分:液壓挖掘機工具強度測量 | Testing earth-moving machinery - Measurement of tool forces of hydraulic excavators |
| BS 6913-1 | 運土機械的操作和維修.第1部分:普通維修和調節用工具指南 | Operation and maintenance of earth-moving machinery - Guide to common maintenance and adjustment service tools |
| BS 6913-15 | 運土機械的操作和維修.維修工具規范.拆卸器和推進器 | Operation and maintenance of earth-moving machinery - Specification for service tools - Mechanical pullers and pushers |
| BS 6942-2 | 氧燃料氣體焊接和相關工藝用成套小型工具的設計和建造.第2部分:使用可充氧氣和燃?xì)馊萜鞯某商坠ぞ咭?guī)范 | Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas |
| BS 7079-D3 | 涂料和有關產品應用前鋼基片的制備.表面制備方法.第D3部分:手持和電動工具清理 | Preparation of steel substrates before application of paints and related products. Methods for surface preparation. Hand- and power-tool cleaning |
| BS 7272 | 書寫工具和標記工具安全蓋規范 | Specification for safety caps for writing and marking instruments |
| BS 7272-2 | 書寫工具和標記工具.端蓋規范 | Writing and marking instruments - Specification for end closures |
| BS 7520 | 帶電作業工具的質量保證規劃指南 | Guide to quality assurance plans for tools for live working |
| BS 7564-10 | 制模工具.第10部分:支柱尺寸規范 | Tools for moulding - Specification for dimensions of support pillars |
| BS 7564-3 | 制模工具.直桿和有肩壓模導柱及有肩定位導柱 | Tools for moulding - Mould guide pillars, straight and shouldered , and locating guide pillars, shouldered |
| BS 7568-1 | 沖壓工具.第1部分:沖頭的命名和術語 | Press tools - Punches - Nomenclature and terminology |
| BS 7568-11 | 沖壓工具.第11部分:A型沖壓模用的抗磨板 | Press tools - Wear plates for press dies - Type A |
| BS 7568-12 | 沖壓工具.第12部分:彈性體壓力彈簧一般規范 | Press tools - Elastomer pressure springs - General specification |
| BS 7568-13 | 沖壓工具.第13部分:彈性體壓力彈簧.附件規范 | Press tools - Elastomer pressure springs - Specification of accessories |
| BS 7568-15 | 沖壓工具.第15部分:沖頭固定桿.C型 | Press tools - Punch holder shanks - Type C |
| BS 7568-16 | 沖壓工具.第16部分:沖頭固定桿.D型 | Press tools - Punch holder shanks - Type D |
| BS 7568 | 沖壓工具.導襯.1類普通球體襯套B型 | Press tools. Guide bushes. Form B, ball cage bushes, plain, type 1 |
| BS 7568-25 | 沖壓工具.導柱.類型 | Press tools - Guide pillars - Types |
| BS 7568-26 | 沖壓工具.導柱.A型直導柱 | Press tools - Guide pillars - Type A, straight pillars |
| BS 7568-27 | 沖壓工具.導柱.B型端鎖式導柱 | Press tools - Guide pillars - Type B, end-locking pillars |
| BS 7568-28 | 沖壓工具.導柱.C型帶錐度導程和套管的導柱 | Press tools - Guide pillars - Type C, pillars with taper lead and bush |
| BS 7568-29 | 沖壓工具.導柱.D型帶法蘭的端鎖式導柱 | Press tools - Guide pillars - Type D, end-locking pillars with flange |
| BS 7568-4 | 沖壓工具.矩形剖面壓縮彈簧.外殼的尺寸和色標編碼 | Press tools - Compression springs with rectangular section - Housing dimensions and colour coding |
| BS 7568-7 | 沖壓工具.帶60°圓錐頭和直桿的圓沖頭 | Press tools - Round punches with 60 ° conical head and straight shank |
| BS 7901 | 回收運載工具和車輛回收設備規范 | Specification for recovery vehicles and vehicle recovery equipment |
| BS 8020 | 帶電作業用工具.電壓交流1000V或直流1500V及以下的導電軌道系統或其附近工作時使用的絕緣手工工具 | Tools for live working - Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c |
| BS 869 | 工具制造操作平臺和高精度劃線平臺規范 | Specification for toolmakers' flats and high precision surface plates |
| BS CWA 15143 | 歐洲建筑軟件執行工具箱(EeS) | European econstruction software implementation toolset (EeS) |
| BS DD ISO/TS 13399-100 | 切削工具數據表示和交換.參考詞典的定義、原則和方法 | Cutting tool data representation and exchange - Definitions, principles and methods for reference dictionaries |
| BS DD ISO/TS 13399-3 | 切削工具數據表示和交換.工具項用參考字典 | Cutting tool data representation and exchange - Reference dictionary for tool items |
| BS DD ISO/TS 13399-4 | 切削工具數據表示和交換.適應項參考字典 | Cutting tool data representation and exchange - Reference dictionary for adaptive items |
| BS DD ISO/TS 13399-50 | 切削工具數據表示和交換.參考系統和一般概念用參考字典 | Cutting tool data representation and exchange - Reference dictionary for reference systems and common concepts |
| BS DD ISO/TS 13399-60 | 切削工具數據表示和交換.連接系統用參考字典 | Cutting tool data representation and exchange - Reference dictionary for connection systems |
| BS DD ISO/TS 17104 | 螺紋緊固件的旋轉刀具.液壓推動工具.性能試驗方法 | Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method |
| BS DD ISO/TS 21108 | 手持式動力工具.脈沖扳手.電插座接口的尺寸和公差 | Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket |
| BS DD ISO/TS 28923 | 農業機械.電力傳輸移動部件防護裝置.用工具打開的防護裝置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool |
| BS DD ISO/TS 28924 | 農業機械.電力傳輸移動部件防護裝置.不用工具打開的防護裝置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool |
| BS EN 1034-4 | 機械安全.造紙機械和精整機設計和結構的安全要求.碎漿機和裝載工具 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Pulpers and their loading facilities |
| BS EN 12101-6 | 煙和熱控制系統.壓差系統規范.工具箱 | Smoke and heat control systems - Specification for pressure differential systems - Kits |
| BS EN 12549 | 聲學.緊固件驅動工具的噪聲試驗法規.工程法 | Acoustics - Noise test code for fastener driving tools - Engineering method |
| BS EN 12561-1 | 鐵路工具.有軌車.危險貨物運輸油罐車標記 | Railway applications - Tank wagons - Marking of tank wagons for the carriage of dangerous goods |
| BS EN 12736 | 電力驅動的道路車輛.用運載工具車上帶的充電器充電過程中車輛在空中發出的噪聲.聲功率水平的測定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
| BS EN 13089 | 登山設備.攀冰工具.安全要求和試驗方法 | Mountaineering equipment - Ice tools - Safety requirements and test methods |
| BS EN 13204 | 消防和救生用雙動液壓救生工具.安全和性能要求 | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
| BS EN 13209-1 | 兒童使用和護理用品.嬰兒運載工具.安全要求和檢驗方法.后向有框架的運載工具 | Child use and care articles - Baby carriers - Safety requirements and test methods - Framed back carriers |
| BS EN 13209-2 | 兒童使用和護理用品.嬰兒運載工具.安全要求和檢驗方法.軟式運載工具 | Child use and care articles - Baby carriers - Safety requirements and test methods - Soft carrier |
| BS EN 13484 | 搖柄工具使用者的安全帽 | Helmets for users of luges |
| BS EN 13551 | 內路航行運載工具.詞匯 | Inland navigation vessels - Vocabulary |
| BS EN 14206 | 內河航行運載工具.客輪通道.要求和試驗 | Inland navigation vessels - Gangways for passenger vessels - Requirements, tests |
| BS EN 14372 | 兒童使用和護理用品.刀叉和喂養工具.安全要求和試驗 | Child use and care articles - Cutlery and feeding utensils - Safety requirements and tests |
| BS EN 14887 | 玻璃包裝.開啟軟木塞工具.一般要求 | Glass packaging — Cork removal devices — General requirements |
| BS EN 15266 | 建筑物中工作壓力等于0.5bar的氣體用不銹鋼柔性波管工具 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| BS EN 1756-2 | 尾部提升機.輪式運載工具上安裝的平臺提升機.安全要求.客用尾部提升機 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Tail lifts for passengers |
| BS EN 1889-1 | 地下采礦機械.移動式機械地下作業.安全.安裝橡膠輪胎的運載工具 | Machines for underground mines - Mobile machines working underground - Safety - Rubber tyred vehicles |
| BS EN 2591-506 | 電氣和光學連接連接元件.試驗方法.工具的使用 | Elements of electrical and optical connection - Test methods - Use of tools |
| BS EN 28662-1 | 手持便攜電動工具.手柄振動測量.總則 | Hand-held portable power tools - Measurement of vibrations at the handle - General |
| BS EN 28662-2 | 手持便攜電動工具.手柄振動測量.鑿錘和鉚錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Chipping hammers and riveting hammers |
| BS EN 28662-3 | 手持便攜電動工具.手柄振動測量.巖石鉆和旋轉錘頭 | Hand-held portable power tools - Measurement of vibrations at the handle - Rock drills and rotary hammers |
| BS EN 28662-5 | 手持便攜電動工具.手柄振動測量.施工用路面碎石機和汽錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Pavement breakers and hammers for construction work |
| BS EN 3545-008 | 航空航天系列.工作溫度為-55℃～175℃后部密封或非密封的、塑料殼鎖定裝置矩形電連接器.編碼的裝配/移除工 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °CC - Tools for assembly/removal of coding and attachment systems - Product standard |
| BS EN 4008-001 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第001部分:技術規范 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification |
| BS EN 4008-002 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第002部分:產品標準列表 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 002: List of product standards |
| BS EN 4008-005 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第005部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 005: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第006部分:M22520/7型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 006: Positioner for crimping tool M22520/7 - Product standard |
| BS EN 4008-007 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第007部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-008 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第008部分:M22520/7-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard |
| BS EN 4008-011 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第011部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 011: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-012 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第012部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 012: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-013 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-014 | 航空航天系列.電氣及光學連接部件.壓接工具及其附件.M22520/31-01型壓接工具用轉盤.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Turret for crimping tool M22520/31-01 - Product standard |
| BS EN 4008-017 | 航空航天系列.電氣及光學連接部件.壓接工具和相關部件.第017部分:M22520/41-01型壓接工具頭.產品標準 | Aerospace series — Elements of electrical and optical connection — Crimping tools and associated accessories — Part 017: Head for crimping tool M22520/4-01 — Product standard |
| BS EN 4057-407 | 導線電纜扎匝.試驗方法.第407部分:使用工具調整校驗 | Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings |
| BS EN 4165-022 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第022部分:模塊移除的插入/萃取工具.產品標準 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard |
| BS EN 4533-001 | 航空航天系列.纖維光學系統.手冊.終端法和工具 | Aerospace series - Fibre optic systems - Handbook - Termination methods and tools |
| BS EN 50109-1 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.一般要求和試驗 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - General requirements and tests |
| BS EN 50109-2-1 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.特殊要求.射頻連接器和同軸接觸點.有固定模開式工具,規 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes A to E, V and W |
| BS EN 50109-2-2 | 手工壓接工具.低頻和射頻用電纜和電線終端壓接工具.特殊要求.射頻連接器和同軸接觸點的手工壓接工具.有可拆 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with removable and interchangeable dies, sizes A to G, Q to T, V and W |
| BS EN 50109-2-3 | 手動壓接工具.低頻和高頻電線和電纜壓接連接工具.第2-3部分:電器插接件觸點專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Contacts of electrical connectors |
| BS EN 50109-2-4 | 手動壓接工具.低頻和高頻電線和電纜壓接連接工具.專門要求.SMZ系列高頻插接連接的中間接點專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Centre contacts of RF connectors, series SMZ |
| BS EN 50109-2-5 | 手動壓接工具.低頻和高頻用電線和電纜壓接連接用工具.專門要求.數據總線用帶2個內芯的電纜連接專門要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Termination of twin-ax cable for databus applications |
| BS EN 50144-2-15 | 手持電動工具的安全.樹籬修剪機的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for hedge trimmers |
| BS EN 50144-2-16 | 手持電動工具的安全.用平頭釘釘東西的工具的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for tackers |
| BS EN 50144-2-3 | 手持電動工具的安全.研磨機、圓盤砂輪機和拋光機的特殊要求 | Safety of hand-held electric motor operated tools - Particular requirements for grinders, disk type sanders and polishers |
| BS EN 50144-2-7 | 手持電動工具的安全性.噴槍專門要求 | Safety of hand-held electric motor operated tools - Particular requirements for spray guns |
| BS EN 50260-1 | 手持電池動力的電機驅動工具和電池組的安全性.一般要求 | Safety of hand-held battery-powered motor-operated tools and battery packs - General requirements |
| BS EN 50260-2-7 | 手持電池動力的電機驅動工具和電池組的安全性.噴槍的特殊要求 | Safety of hand-held battery-powered motor-operated tools and battery packs - Particular requirements for spray guns |
| BS EN 55014-1 | 電磁兼容性.家用電器、電動工具和類似器具的要求.輻射 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission |
| BS EN 55014-1 | 電磁兼容性.家用電器、電動工具和類似器具的要求.第1部分:發射 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| BS EN 55014-2 | 電磁兼容性.家用電動工具和類似加熱器具的要求.干擾性.產品系列標準 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Immunity - Product family standard |
| BS EN 60335-2-45 | 家用和類似用途電器的安全規范.特殊要求.便攜式電熱工具及類似電器的特殊要求 | Specification for safety of household and similar electrical appliances - Particular requirements - Particular requirements for portable heating tools and similar appliances |
| BS EN 60743 | 帶電作業.工具、設備和裝置術語 | Live working - Terminology for tools, equipment and devices |
| BS EN 60745-1 | 手持式電動工具.安全.一般要求 | Hand-held motor-operated electric tools - Safety - General requirements |
| BS EN 60745-1 | 手持式電動操作的電動工具.安全.一般要求 | Hand-held motor-operated electric tools - Safety - General requirements |
| BS EN 60745-2-1 | 手持式電動工具的安全.電鉆和沖擊鉆的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for drills and impact drills |
| BS EN 60745-2-11 | 手持式電動工具的安全.往復鋸(曲線鋸和刀鋸)的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for reciprocating saws (jig and sabre saws) |
| BS EN 60745-2-12 | 手持式電動工具的安全.混凝土振搗器的特殊要求 | Hand-held motor-operated electric tools - Safety Part 2-12:Particular requirements for concrete vibrators |
| BS EN 60745-2-13 | 手持式電動工具.安全.鏈鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for chain saws |
| BS EN 60745-2-14 | 手持式電動工具.安全.刨床的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for planers |
| BS EN 60745-2-15 | 手持電動工具.安全性.樹籬修剪器的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for hedge trimmers |
| BS EN 60745-2-17 | 手持式電動工具的安全.木銑和修整機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for routers and trimmers |
| BS EN 60745-2-18 | 手持式電動工具.安全性 | Hand-held motor-operated electric tools - Safety - Particular requirements of strapping tools |
| BS EN 60745-2-19 | 手持式電動工具.安全性.第2-19部分:連接件的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers |
| BS EN 60745-2-2 | 手持式電動工具的安全.電動旋具和沖擊扳手的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for screwdrivers and impact wrenches |
| BS EN 60745-2-20 | 手持式電動工具.安全.帶鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for band saws |
| BS EN 60745-2-21 | 手持式機動電動工具.安全.排水式清潔器的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for drain cleaners |
| BS EN 60745-2-3 | 手持式機動電動工具.安全.研磨機、拋光機和盤型砂輪機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for grinders, polishers and disk-type sanders |
| BS EN 60745-2-4 | 手持式電動工具的安全.盤式除外的砂輪機和拋光機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers other than disk type |
| BS EN 60745-2-5 | 手持式電動工具的安全.圓盤鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for circular saws |
| BS EN 60745-2-5 | 手持式機動電動工具.安全.圓盤鋸特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for circular saws |
| BS EN 60745-2-6 | 手持式機動電動工具.安全.電錘的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for hammers |
| BS EN 60745-2-8 | 手持式電動工具.安全.剪切機和步?jīng)_輪廓機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for shears and nibblers |
| BS EN 60745-2-9 | 手持式電動工具的安全.攻絲機的特殊要求 | Hand-held motor-operated electric tools - Safety - Particular requirements for tappers |
| BS EN 60832 | 帶電作業用絕緣棒及萬能工具配件規范 | Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| BS EN 60900 | 帶電作業.交流1000V和直流1500V及以下帶電作業用手持工具 | Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c |
| BS EN 61029-1 | 可運輸?shù)碾姍C(jī)控制工具的安全性.一般要求 | Safety of transportable motor-operated tools - General requirements |
| BS EN 61029-2-1 | 可移動的電機控制工具的安全性.圓盤鋸工作臺的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for circular saw benches |
| BS EN 61029-2-11 | 移動式電動工具的安全.組合橫切鋸和臺鋸的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for combined mitre and bench saws |
| BS EN 61029-2-4 | 移動式電動工具的安全.臺式磨床的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for bench grinders |
| BS EN 61029-2-5 | 可移動的電機控制工具的安全性.帶鋸的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for band saws |
| BS EN 61029-2-8 | 移動式電動工具的安全.單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for single spindle vertical moulders |
| BS EN 61029-2-9 | 移動式電動工具的安全.斜切鋸的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for mitre saws |
| BS EN 61477 | 帶電作業.工具、器件和設備的最低使用要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| BS EN 61499-2 | 功能塊.軟件工具要求 | Function blocks - Part 2: Software tools requirements |
| BS EN 62237 | 帶電作業.與液壓工具和設備一起使用的帶配件的絕緣軟管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| BS EN 792-1 | 手持非電動工具.安全性要求.無螺紋的機械緊固件用的裝配動力工具 | Hand-held non-electric power tools - Safety requirements - Assembly power tools for non-threaded mechanical fasteners |
| BS EN 792-10 | 手持非電動工具.安全性要求.壓縮動力工具 | Hand-held non-electric power tools - Safety requirements - Compression power tools |
| BS EN 792-11 | 手持非電動工具.安全性要求.步?jīng)_輪廓機和剪切機 | Hand-held non-electric power tools - Safety requirements - Nibblers and shears |
| BS EN 792-12 | 手持非電動工具.安全性要求.小圓盤鋸、小擺鋸和往復式鋸 | Hand-held non-electric power tools - Safety requirements - Small circular, small oscillating and reciprocating saws |
| BS EN 792-13 | 手持非電動工具.安全性要求.緊固件旋擰工具 | Hand-held non-electric power tools - Safety requirements - Fastener driving tools |
| BS EN 792-2 | 手持非電動工具.安全性要求.切割和卷邊動力工具 | Hand-held non-electric power tools - Safety requirements - Cutting-off and crimping power tools |
| BS EN 792-3 | 手持非電動工具.安全性要求.鉆頭和攻絲機 | Hand-held non-electric power tools - Safety requirements - Drills and tappers |
| BS EN 792-4 | 手持非電動工具.安全性要求.非旋轉沖擊動力工具 | Hand-held non-electric power tools - Safety requirements - Non-rotary percussive power tools |
| BS EN 792-5 | 手持非電動工具.安全性要求.旋轉沖擊鉆 | Hand-held non-electric power tools - Safety requirements - Rotary percussive drills |
| BS EN 792-6 | 手持非電動工具.安全性要求.帶螺紋緊固件用的裝配動力工具 | Hand-held non-electric power tools - Safety requirements - Assembly power tools for threaded fasteners |
| BS EN 792-7 | 手持式非電動工具.安全要求.第7部分:研磨機 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
| BS EN 792-8 | 手持非電動工具.安全性要求.砂輪機和拋光機 | Hand-held non-electric power tools - Safety requirements - Sanders and polishers |
| BS EN 792-9 | 手持非電動工具.安全性要求.沖壓磨床 | Hand-held non-electric power tools - Safety requirements - Die grinders |
| BS EN 847-1 | 木工工具.安全要求.銑刀和圓盤鋸片 | Tools for woodworking - Safety requirements - Milling tools, circular saw blades |
| BS EN 847-2 | 木工工具.安全性要求.刀柄安裝固定的銑刀的刀柄要求 | Tools for woodworking - Safety requirements - Requirements for the shank of shank-mounted milling tools |
| BS EN 847-3 | 木工工具.安全要求.夾緊裝置 | Tools for woodworking - Safety requirements - Clamping devices |
| BS EN ISO 11715-1 | 眼科光學.眼鏡鏡片剖面數據傳輸用數字?jǐn)?shù)據文件的格式.二維描繪工具 | Ophthalmic optics - Format of digital data files for data transfer for profiling of spectacle lenses - Two-dimensional tracers |
| BS EN ISO 15744 | 手持非電動工具.噪聲測量代碼.工程法(2級) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
| BS EN ISO 17776 | 石油和天然氣工業.海上開采裝置.危險識別和風險評定用工具和技術導則 | Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment |
| BS EN ISO 4957 | 工具鋼 | Tool steels |
| BS EN ISO 6789 | 螺釘和螺母用裝配工具.手動扭具.設計合格檢驗、質量合格檢驗和再校準程序的要求和試驗方法 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| BS EN ISO 8504-3 | 涂料和有關產品使用前鋼襯底的制備.表面制備方法.手工工具和電動工具清洗 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Hand- and power-tool cleaning |
| BS EN ISO 8662-10 | 便攜式手提動力工具.手柄振動測量.板料鋸切機和剪切機械 | Hand-held portable power tools - Measurement of vibrations at the handle - Nibblers and shears |
| BS EN ISO 8662-12 | 便攜式手提動力工具.手柄振動測量.有往復作用的鋸和銼和有旋轉或擺動作用的鋸 | Hand-held portable power tools - Measurement of vibrations at the handle - Saws and files with reciprocating action and saws with rotating or oscillating action |
| BS EN ISO 8662-13 | 便攜式手提動力工具.手柄振動測量.模具研磨機 | Hand-held portable power tools - Measurement of vibrations at the handle - Die grinders |
| BS EN ISO 8662-14 | 便攜式手提動力工具.手柄振動的測量.石工用工具和針式標定器 | Hand-held portable power tools - Measurement of vibrations at the handle - Stone-working tools and needle scalers |
| BS EN ISO 8662-4 | 便攜式手提動力工具.手柄振動的測量.第4部分:磨床 | Hand-held portable power tools - Measurement of vibrations at the handle - Grinding machines |
| BS EN ISO 8662-6 | 便攜式手提動力工具.手柄振動的測量.第6部分:沖擊式鉆機 | Hand-held portable power tools - Measurement of vibrations at the handle - Impact drills |
| BS EN ISO 8662-7 | 便攜式手提動力工具.手柄振動測量.扳手,旋具與具有沖擊,推力和棘齒作用的螺母旋具 | Hand-held portable power tools - Measurement of vibrations at the handle - Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
| BS EN ISO 8662-8 | 便攜式手提動力工具.手柄振動測量.拋光和旋轉,軌道和隨機軌道砂輪機 | Hand-held portable power tools - Measurement of vibrations at the handle - Polishers and rotary, orbital and random orbital sanders |
| BS EN ISO 8662-9 | 便攜式手提動力工具.手柄振動的測量.夯錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Rammers |
| BS ISO 10071-1 | 沖壓工具.球鎖緊的沖頭.輕型球鎖緊沖頭 | Tools for pressing - Ball-lock punches - Ball-lock punches for light duty |
| BS ISO 10071-2 | 沖壓工具.球形鎖緊沖床.用于重載荷的球形鎖緊沖床 | Tools for pressing - Ball-lock punches - Ball-lock punches for heavy duty |
| BS ISO 10072 | 模鑄工具.澆口套.尺寸 | Tools for moulding - Sprue bushes - Dimensions |
| BS ISO 10102 | 螺釘和螺母用裝配工具.工程用雙頭呆扳手.扳手長度和頭部厚度 | Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10103 | 螺釘和螺母用裝配工具.雙頭直頸和彎頸套筒扳手.扳手長度和頭部厚度 | Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10104 | 螺釘和螺母用裝配工具.雙頭高頸和矮頸套筒扳手.扳手長度和頭部厚度 | Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads |
| BS ISO 10242-1 | 沖壓工具.沖頭固定桿.A型 | Tools for pressing - Punch holder shanks - Type A |
| BS ISO 1085 | 螺釘和螺母用裝配工具.雙頭扳手.尺寸配對 | Assembly tools for screws and nuts - Double-ended wrenches - Size pairing |
| BS ISO 10914 | 螺釘和螺母用安裝工具.開鍵槽用套管扳手 | Assembly tools for screws and nuts - Sockets and wrenches for spline drive |
| BS ISO 11415 | 沖壓工具.模具 | Tools for pressing - Die sets |
| BS ISO 1173 | 螺釘和螺母用裝配工具.機動和手動旋具類的驅動端和連接部件.尺寸和扭矩試驗 | Assembly tools for screws and nuts - Drive ends for hand and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing |
| BS ISO 11900-1 | 沖壓工具.球緊鎖沖頭固定板.用于輕載荷的A型和B型(矩形和正方形)固定板 | Tools for pressing - Ball-lock punch retainers - Types A and B, rectangular and square for light duty |
| BS ISO 11900-2 | 沖壓工具.球鎖緊的沖頭固定板.輕型縮頸C和D型 | Tools for pressing - Ball-lock punch retainers - Types C and D, reduced for light duty |
| BS ISO 11900-3 | 沖壓工具.球鎖沖頭固定板.用于重負荷的E型固定板 | Tools for pressing - Ball-lock punch retainers - Type E, reduced for heavy duty |
| BS ISO 11901-1 | 沖壓工具.氣壓彈簧.總規范 | Tools for pressing - Gas springs - General specifications |
| BS ISO 11901-2 | 沖壓工具.氣壓彈簧.附件的規范 | Tools for pressing - Gas springs - Specification of accessories |
| BS ISO 11948-1 | 吸尿工具.第1部分:整體試驗 | Urine-absorbing aids - Whole-product testing |
| BS ISO 13399-1 | 切削工具數據表示和交換.基本原則和一般信息模式的概括 | Cutting tool data representation and exchange - Overview, fundamental principles and general information model |
| BS ISO 13628-9 | 石油和天然氣工業.海底開采系統的設計和運行.遠程操作工具(ROT)介入系統 | Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated tool (ROT) intervention systems |
| BS ISO 14303 | 航天系統.航天運載工具與航天器的接口 | Space systems - Launch-vehicle-to-spacecraft interfaces |
| BS ISO 14531-4 | 塑料管道和配件.氣體燃料運輸工具用交聯聚乙烯(PE-X)管道系統.米制系列.規范.系統設計和安裝指南 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - System design and installation guidelines |
| BS ISO 15600 | 模壓工具.注塑模具的隔熱板 | Tools for moulding - Thermal insulating sheets for injection moulds |
| BS ISO 15863 | 航天系統.航天飛機與運載工具間接口的控制文獻 | Space systems - Spacecraft-to-launch-vehicle interface control document |
| BS ISO 16004 | 飛機地面設備.乘客登機橋或運輸工具.與飛機艙門接口的要求 | Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Requirements for interface with aircraft doors |
| BS ISO 16366 | 沖壓工具.L形導向器 | Tools for pressing - L-shaped guides |
| BS ISO 16367 | 沖壓工具.導板.U形和V形塊 | Tools for pressing - Guide plates - U- and V-blocks |
| BS ISO 16915 | 鑄模用工具.直澆口拉出器 | Tools for moulding - Sprue pullers |
| BS ISO 16916 | 壓模工具.注模工具規格單 | Tools for moulding - Tool specification sheet for injection moulds |
| BS ISO 17567 | 農業和林業拖拉機和工具.超液壓動力 | Agriculture and forestry tractors and implements - Hydraulic power beyond |
| BS ISO 17776 | 石油和天然氣工業.近海生產裝置.危險識別和風險評估用工具和技術指南 | Petroleum and natural gas industries - Offshore production installations - Guidance on tools and techniques for hazard identification and risk assessment |
| BS ISO 2351-1 | 螺釘和螺母用裝配工具.機器驅動旋具頭.一字槽頭螺釘用旋具頭 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for slotted head screws |
| BS ISO 2351-2 | 螺釘和螺母的裝配工具.機器控制的改錐.十字槽凹頭螺釘用改錐 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for cross-recessed head screws |
| BS ISO 2351-3 | 螺釘和螺母用裝配工具.機器控制的改錐.六角內孔螺絲用改錐 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for hexagon socket screws |
| BS ISO 2725-3 | 螺釘和螺母用裝配工具.方形傳動套筒.機用套筒(無沖擊).尺寸 | Assembly tools for screws and nuts - Square drive sockets - Machine-operated sockets ("non-impact") - Dimensions |
| BS ISO 3875 | 機械工具.外圓無心磨床的試驗條件.精度檢驗 | Machine tools - Test conditions for external cylindrical centreless grinding machines - Testing of the accuracy |
| BS ISO 5391 | 氣動工具和機械.詞匯 | Pneumatic tools and machines - Vocabulary |
| BS ISO 603-16 | 粘合磨料產品.尺寸.手持動力工具的切削砂輪 | Bonded abrasive products - Dimensions - Grinding wheels for cutting-off on hand-held power tools |
| BS ISO 603-6 | 粘合磨料產品.尺寸.工具和工具室磨削用砂輪 | Bonded abrasive products - Dimensions - Grinding wheels for tool and toolroom grinding |
| BS ISO 6104 | 高強度磨料制品.金剛石或立方氮化硼旋轉磨削工具.一般評述、名稱和多種語言術語 | Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature |
| BS ISO 6105-2 | 超級研磨切割砂輪用坯件.建筑物和土木工程用手持式切割工具 | Blanks for superabrasive cutting-off wheels - Hand-held cutting-off in building and civil engineering |
| BS ISO 6751 | 制模工具.圓柱頭脫模銷 | Tools for moulding - Ejector pins with cylindrical head |
| BS ISO 6753-1 | 沖壓和模鑄工具.機加工板.沖壓工具的機加工板 | Tools for pressing and moulding - Machined plates - Machined plates for press tools |
| BS ISO 6753-2 | 模壓工具.機加工金屬板.第2部分:模具用機加工金屬板 | Tools for pressing and moulding - Machined plates - Machined plates for moulds |
| BS ISO 6787 | 螺釘和螺母用裝配工具.可調扳手 | Assembly tools for screws and nuts - Adjustable wrenches |
| BS ISO 7388-1 | 自動工具轉換用7/24錐度工具柄.A、AD、AF、U、UD和UF型柄的尺寸和標志 | Tool shanks with 7/24 taper for automatic tool changers - Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| BS ISO 7388-2 | 自動工具轉換用7/24錐度工具柄.J、JD和JF型柄的尺寸和標志 | Tool shanks with 7/24 taper for automatic tool changers - Dimensions and designation of shanks of forms J, JD and JF |
| BS ISO 7388-3 | 自動工具轉換用7/24錐度工具柄.AC、AD、 AF、 UC、UD、UF、JD和JF型柄保持按鈕 | Tool shanks with 7/24 taper for automatic tool changers - Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF |
| BS ISO 7738 | 螺釘和螺母用組合工具.組合扳手.扳手長度和頭部最大厚度 | Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads |
| BS ISO 8009-1 | 可重復使用的橡膠避孕工具.第1部分:分類、取樣和要求 | Reusable rubber contraceptive diaphragms - Classification, sampling and requirements |
| BS ISO 8009-10 | 可重復使用的橡膠避孕工具.第10部分:儲存的推薦標準 | Reusable rubber contraceptive diaphragms - Recommendations for storage |
| BS ISO 8009-2 | 可重復使用的橡膠避孕工具.第2部分:尺寸測定 | Reusable rubber contraceptive diaphragms - Determination of size |
| BS ISO 8009-3 | 可重復使用的橡膠避孕工具.第3部分:子宮帽厚度測定 | Reusable rubber contraceptive diaphragms - Determination of dome thickness |
| BS ISO 8009-4 | 可重復使用的橡膠避孕工具.第4部分:無明顯陷缺 | Reusable rubber contraceptive diaphragms - Freedom from visible defects |
| BS ISO 8009-5 | 可重復使用的橡膠避孕工具.第5部分:抗拉性能的測定 | Reusable rubber contraceptive diaphragms - Determination of tensile properties |
| BS ISO 8009-6 | 可重復使用的橡膠避孕工具.第6部分:加速老化后的變質測定 | Reusable rubber contraceptive diaphragms - Determination of deterioration after accelerated ageing |
| BS ISO 8009-7 | 可重復使用的橡膠避孕工具.第7部分:卷簧和板簧避孕工具耐壓縮性測定 | Reusable rubber contraceptive diaphragms - Determination of compression resistance of coil spring and flat spring diaphragms |
| BS ISO 8009-8 | 可重復使用的橡膠避孕工具.第8部分:卷簧和板簧避孕工具壓縮時的扭轉測定 | Reusable rubber contraceptive diaphragms - Determination of twisting during compression of coil spring and flat spring diaphragms |
| BS ISO 8009-9 | 可重復使用的橡膠避孕工具.第9部分:包裝和標簽 | Reusable rubber contraceptive diaphragms - Packaging and labelling |
| BS ISO 8018 | 模制工具.有頭的導套和有頭的定位導套 | Tools for moulding - Guide bushes, headed, and locating guide bushes, headed |
| BS ISO 8020 | 壓制加工用工具.帶圓頭和直的或縮小柄桿的沖頭 | Tools for pressing - Punches with cylindrical head and straight or reduced shank |
| BS ISO 8085-1 | 供應燃?xì)獾木垡蚁┕苌鲜褂玫木垡蚁┕芗?米制系列.規范.用加熱工具進行套筒熔融的管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Fittings for socket fusion using heated tools |
| BS ISO 8404 | 鑄模用工具.斜銷 | Tools for moulding - Angle pins |
| BS ISO 8694 | 制模工具.帶肩脫模銷 | Tools for moulding - Shouldered ejector pins |
| BS ISO 8977 | 沖壓工具.沖模 | Tools for pressing - Matrixes |
| BS ISO 9181 | 沖壓工具.60°錐頭縮徑的圓沖頭 | Tools for pressing - Round punches with 60 ° conical head and reduced shank |
| BS ISO 9449 | 模制工具.定心套 | Tools for moulding - Centring sleeves |
| BS ISO/TS 13399-2 | 切削工具數據表示和交換.切削項目的參考字典 | Cutting tool data representation and exchange - Reference dictionary for the cutting items |
| DD ENV 12314-1 | 公路運輸和交通遠程信息處理.自動交通工具和設備識別.基準建筑物和術語 | Road transport and traffic telematics. Automatic vehicle and equipment identification. Reference architectures and terminology |
| DD ENV 12315-1 | 交通和旅行者信息(TTI).第1部分:借助于專用短途通信的TTI信息.數據規范.下行線路(從路邊地帶到交通工具) | Traffic and traveller information (TTI). TTI messages via dedicated short-range communication. Data specification. Downlink (roadside to vehicle) |
| DD ENV 12315-2 | 交通與旅行者信息(TTI).借助于專用短途通信的TTI信息.數據規范.上行線路(從交通工具到路邊地帶) | Traffic and traveller information (TTI). TTI messages via dedicated short-range communication. Data specification. Uplink (vehicle to roadside) |
| DD ENV 658-4 | 高技術陶瓷.室溫下陶瓷復合材料的機械性能.第4部分:用帶鋸齒的工具加壓載荷法對剪切強度的測定 | Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of shear strength by compression loading of notched specimens |
| EP 526 | BSI電子書.信息安全管理工具箱 | BSI Electronic Book - Information Security Management Toolkit |
| KIT 117 | 有關累計和法的BS 5703系列工具 | BS 5703 Series Kit on Cusum Methods |
| KIT 119 | 混凝土鋪路工具 | Concrete paving kit |
| KIT 193 | 軟件工程.產品質量工具包 | Software engineering - Product quality kit |
| KIT 194 | BS ISO/IEC 18028 IT 網絡安全防護工具組件 | BS ISO/IEC 18028 IT network security Kit |
| KIT 48 | BSI電子圖書.質量管理2000第2版 (BS EN ISO 9000:2000 系列 CD-ROM 工具組) | Quality management systems (BS EN ISO 9000:2000 series) standards and guidance kit CD-ROM |
| RA Software Tool | RA軟件工具 | RA Software Tool |
| 編號 | 中文名稱 | 英文名稱 |