微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS C1010-2-32 | 測量、控制和試驗室用電氣設備的安全要求.第2-32部分:電測量和試驗用手持電流夾具的特殊要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-32: Particular requirements for hand-held current clamps for electrical measurement and test |
| JIS C1102-2 | 直接動作指示模擬電氣測量?jī)x器及其附件.第2部分:電流表和電壓表的特殊要求 | Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters |
| JIS C1731-1 | 測試用和與一般儀器一起使用的儀器變壓器.第1部分:電流變壓器 | Instrument transformers for testing purpose and used with general instrument Part 1: Current transformers |
| JIS C2135 | 干燥固態絕緣材料.高壓低電流弧放電的阻尼試驗.試驗方法 | Dry, solid insulating materials -- Resistance test to high-voltage, low-current arc discharges -- Test methods |
| JIS C4602 | 可承受6.6KV的過電流繼電器 | Overcurrent relays for 6.6 kV receiving |
| JIS C5402-2-2 | 電子設備連接器.試驗和測量.第2-2部分:電連續性和接觸電阻試驗.試驗2b:接觸電阻.規定試驗電流法 | Connectors for electrical equipment -- Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests -- Test 2b: Contact resistance -- Specified test current method |
| JIS C5402-5-2 | 電子設備連接器.試驗和測量.第5-2部分:載流容量試驗.試驗5b:電流-溫度下降 | Connectors for electronic equipment -- Tests and measurements -- Part 5-2: Current-carrying capacity tests -- Test 5b: Current-temperature derating |
| JIS C60364-4-43 | 建筑物的電氣裝置.第4-43部分:安全防護.過電流防護 | Electrical installations of buildings -- Part 4-43: Protection for safety -- Protection against overcurrent |
| JIS C61000-3-2 | 電磁兼容性(EMC).第3-2部分:限值.諧波電流發射的限值(設備每相輸入電流<=20A) | Electromagnetic compatibility (EMC) -- Part 3-2: Limits -- Limits for harmonic current emissions (equipment input current <= 20 A per phase) |
| JIS C8201-2-2 | 低壓開關設備和控制設備.第2-2部分:帶剩余電流防護的斷路器 | Low-voltage switchgear and controlgear -- Part 2-2: Circuit-breakers incorporating residual current protection |
| JIS C8211 | 家用和類似裝置用過電流保護斷路器 | Circuit-breakers for overcurrent protection for household and similar installations |
| JIS C8221 | 家用和類似用途的無完整過電流保護的殘余電流操作斷路器(RCCBs) | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) |
| JIS C8222 | 家用和類似用途的有完整過電流保護的殘余電流操作斷路器(RCCBs) | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) |
| JIS C8371 AMD 1 | 殘余電流操作線路斷路器(補充件1) | Residual current operated circuit breakers (Amendment 1) |
| JIS C8371 | 剩余電流操作斷路器 | Residual current operated circuit breakers |
| JIS C8374 | 殘余電流感應和繼電設備 | Residual current sensing and relaying equipment |
| JIS C8916 AMD 1 | 晶系太陽能電池和模件的輸出電壓和電流的溫度系數測量方法(修改件1) | Temperature coefficient measuring methods of output voltage and output current for crystalline solar cells and modules (Amendment 1) |
| JIS C8916 AMD 1 | 晶體太陽能電池和模件的輸出電壓和電流的溫度系數測量方法(修改件1) | Temperature coefficient measuring methods of output voltage and output current for crystalline solar cells and modules (Amendment 1) |
| JIS C8916 | 晶狀太陽能電池和模塊的輸出電壓和輸出電流溫度系數的測量方法 | Temperature coefficient measuring methods of output voltage and output current for crystalline solar cells and modules |
| JIS C8937 AMD 1 | 非晶體太陽能電池和模件的輸出電壓和電流的溫度系數測量方法(修改件1) | Temperature coefficient measuring methods of output voltage and output current for amorphous solar cells and modules (Amendment 1) |
| JIS C8937 AMD 1 | 非晶體太陽能電池和模件的輸出電壓及輸出電流的溫度系數測量方法(修改件1) | Temperature coefficient measuring methods of output voltage and output current for amorphous solar cells and modules (Amendment 1) |
| JIS C8937 | 非晶體太陽能電池和組件的輸出電壓和輸出電流的溫度系數的測量方法 | Temperature coefficient measuring methods of output voltage and output current for amorphous solar cells and modules |
| JIS D5604 | 汽車電流表 | Ammeters for automobiles |
| JIS H7301 | 超導性.試驗方法.第1部分:臨界電流.第1部分:銅/鈮-鈦復合超導體 | Superconductivity -- Test method -- Part 1: Critical current -- Section 1: DC critical current of Cu/Nb-Ti composite superconductors |
| JIS H7302 | 超導性.第2部分:臨界電流測量.Nb3Sn復合超導體的直流臨界電流 | Superconductivity -- Part 2: Critical current measurement -- DC critical current of Nb3Sn composite superconductors |
| JIS H7305 | 超導性.第3部分:臨界電流測量.包銀的鉍-2212和鉍-2223氧化物超導體的臨界直流電流 | Superconductivity -- Part 3: Critical current measurement -- DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| JIS H8680-1 | アルミニウム及びアルミニウム合金の陽極酸化皮膜厚さ試験方法 ― 第１部：顕微鏡斷面測定法 | Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Microscopical method |
| JIS H8680-2 | 鋁和鋁合金的陽極氧化膜厚度試驗方法.渦流電流法 アルミニウム及びアルミニウム合金の陽極酸化皮膜厚さ試験方法 ― 第２部：渦電流式測定法 | Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Eddy current method |
| JIS H8680-3 | アルミニウム及びアルミニウム合金の陽極酸化皮膜厚さ試験方法 ― 第３部：スプリットビーム顕微鏡測定法 | Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Non-destructive measurement by split-beam microscope |
| JIS K0113 | 電位測定法、電流測定法、庫侖測定法和卡爾.費歇爾滴定法的一般規則 電位差?電流?電量?カールフィッシャー滴定方法通則 | General rules for methods of potentiometric, amperometric, coulometric, and Karl Fischer titrations |
| JIS K7131 | 塑料薄膜熱強化電流的測試方法 プラスチックフィルムの熱刺激電流試験方法 | Testing method for thermally stimulated current of plastic films |
| JIS K7244-10 | 塑料.動態力學性能的測定.第10部分:用平行板振蕩電流計測定復切變粘度 プラスチック―動的機械特性の試験方法―第１０部：平行平板振動レオメータによる複素せん斷粘度 | Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer |
| JIS T1161 | 視網膜電流描記器 | Electroretinographs |
| 編號 | 中文名稱 | 英文名稱 |