微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI C37.06 | 開關裝置.對稱電流限定的交流高壓斷路器.優先額定值和相應要求性能 | Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C37.06.1 | 快速瞬時恢復壓升時間(非美國標準)用指定對稱電流基礎額定值的高壓斷路器試用指南 | Trial-Use Guide for High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Designated "Definite Purpose for Fast Transient Recovery Voltage Rise Times" (NOT AN AMERICAN NATIONAL STANDARD) |
| ANSI C37.06a | 開關裝置.對稱電流限定的交流高壓斷路器.優先額定值和相應要求性能 | Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C82.7 | 水銀燈變壓器.恒定電流(系列)供電型 | Mercury Lamp Transformers - Constant-Current (Series) Supply Type |
| ANSI C82.8 | 燈變壓器.白熾燈變壓器.恒定電流(系列)供電型 | Lamp Transformers - Incandescent Filament Lamp Transformers - Constant-Current (Series) Supply Type |
| ANSI T1.337 | 網絡電力傳輸系統的最大電壓、電流和功率級的要求 | Requirements for Maximum Voltage, Current, and Power Levels in Network-Powered Transport System |
| ANSI/ASTM A966 | 用交流電流檢驗鋼鍛件磁粒的試驗方法 | Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
| ANSI/ASTM D495 | 固體電絕緣的高壓、低電流和干電弧電阻試驗方法 | Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ANSI/AWWA D104 | 自動控制的鋼制水箱內部的外加電流陰極保護 | Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks |
| ANSI/EIA 364-70A | 電流對電連接器溫度升高影響的試驗程序 | Test Procedure for Current vs Temperature Rise of Electrical Connectors |
| ANSI/EIA 520F000-A | 已質量認證的旋轉式開關分規范(2安培或以下的低電流) | Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less) |
| ANSI/EIA 520FAAA | 已質量認證的(低電流)最大12位置的旋轉式開關的詳細規范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum |
| ANSI/EIA 520FAAB | 已質量認證的(低電流)最大16位置的旋轉式開關的詳細規范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum |
| ANSI/EIA-364-70A | 電連接器的電流與溫升關系的試驗程序 | Test Procedure for Current vs Temperature Rise of Electrical Connectors |
| ANSI/EIA-520F000-A | 質量認證的專用旋轉式開關分規范(低電流容量:2安培及2安培以下) | Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less) |
| ANSI/EIA-520FAAA | 質量認證的(低額定電流)最大12位旋轉式開關詳細規范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum |
| ANSI/EIA-520FAAB | 已獲質量認證的(低額定電流)16位置旋轉式開關詳細規范 | Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum |
| ANSI/IEEE C37.010 | 基于對稱電流的交流高壓斷路器應用指南 | Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.012 | 交流高壓斷路器用電容性電流開關的應用指南 | Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.015 | 并聯電抗器電流轉換用交流高壓斷路器的應用指南 | Application Guide for AC High Voltage Circuit Breakers for Shunt Reactor Current Switching |
| ANSI/IEEE C37.04 | 基于對稱電流的交流高壓斷路器額定結構 | Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.081a | 額定對稱電流基礎上的交流高壓斷路器的綜合故障試驗指南 | Guide for Synthetic Fault Testing of AC High Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.082 | 交流電流斷路器聲壓級的測量 | Sound Pressure Levels of AC Power Circuit Breakers, Measurement of |
| ANSI/IEEE C37.09 | 基于對稱電流的交流高壓斷路器試驗程序 | Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.09a | 基于對稱電流的交流(AC)高壓斷路器標準試驗程序.修改件1:電容電流開關 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching |
| ANSI/IEEE C37.11 | 對稱電流基礎上的AC高壓斷路器的電氣控制標準要求 | Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.110 | 保護繼電器用電流互感器使用指南 | Guide for the Application of Current Transformers Used for Protective Relaying Purposes |
| ANSI/IEEE C37.20.1a | 金屬殼密封的低壓電力線路斷路器開關設備標準.修改1:短時間和短路可耐電流測試;多電纜連接的最小區域 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections |
| ANSI/IEEE C37.36b | 有滅弧的空氣開關電流斷路指南 | Guide to Current Interruption with Horn Gap Air Switches |
| ANSI/IEEE C37.72 | 電流系統用的配有裝載/中斷開關和可分連接器的手工操作正面不帶電面板上安裝的開關設備標準 | Standard for Manually-Operated Dead-Front Padmounted Switchgear with Load/Interrupting Switches and Separable Connectors for Alternating-Current Systems |
| ANSI/IEEE C37.92 | 保護電壓和電流傳感器中繼電器的模擬輸入標準 | Standard for Analog Inputs to Protective Relays From Electronic Voltage and Current Transducers |
| ANSI/IEEE C57.109 | 液浸式變壓器穿越故障電流持續時間的指南 | Guide for Liquid-Immersed Transformer Through-Fault Current Duration |
| ANSI/IEEE C57.110 | 施加非正弦負載電流時變壓器性能確定的推薦實施規程 | Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents |
| ANSI/IEEE C57.12.59 | 干式變壓器全故障電流持續時間指南 | Guide for Dry-Type Transformer Through-Fault Current Duration |
| ANSI/IEEE C57.13.1 | 繼電器用的電流變壓器現場測試指南 | Field Testing of Relaying Current Transformers |
| ANSI/IEEE C62.23 | 發電廠電流波動保護裝置的應用指南 | Application Guide for Surge Protection of Electric Generating Plants |
| ANSI/IEEE C95.2 | 射頻能量和電流符號的標準 | Standard for Radio-Frequency Energy and Current-Flow Symbols |
| ANSI/ISA S82.02.04 | 測量、控制和實驗室用電氣設備的安全要求.第2-032部分:電測量和試驗用手持電流線夾的特殊要求 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test |
| ANSI/SAE J551/13 | 車輛電磁干擾.體電流輸入 | Vehicle Electromagnetic Immunity - Bulk Current Injection |
| ANSI/TIA/EIA 455-128 | 半導體激光器閾值電流的測定程序 | Procedures for Determining Threshold Current of Semiconductor Lasers |
| ANSI/UL 101 | 器具泄漏電流 | Leakage Current for Appliances |
| ANSI/VITA 1.7 | 96針及160針DIN/IEC連接器標準用增長的電流等級 | Increased Current Level for 96 Pin & 160 Pin DIN/IEC Connector Standard |
| ASTM A 772/A 772M | 正弦電流用材料的交流磁導率的標準試驗方法 | Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current |
| ASTM A 927/A 927M | 使用伏特計-電流計-瓦特計方法測試環形鐵芯試樣交流磁性能的標準試驗方法 | Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method |
| ASTM A 966/A 966M | 用交替電流檢驗鍛鋼磁性微粒的標準試驗方法 | Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
| ASTM B 714 | 復合超導體D-C臨界電流的試驗方法 | Test Method for D-C Critical Current of Composite Superconductors |
| ASTM D 3809 | 電容器用合成介電流體的標準試驗方法 | Standard Method for Testing Synthetic Dielectric Fluids For Capacitors |
| ASTM D 495 | 固體電絕緣材料的耐高壓低電流干電弧性能的測試方法 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 5089 | 用電磁電流儀測量明渠水流速度的標準試驗方法 | Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters |
| ASTM D 6208 | 通過電流靜態測量對鋁及其合金折回潛力測定的標準試驗方法 | Standard Test Method for repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM D 6888 | 用氣體擴散分離和電流計探測法對有效氰化物進行配位位移和流量注入分析的標準試驗方法 | Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM E 426 | 無縫焊接管形產品、奧氏體不銹鋼的類似合金的電磁(渦電流)檢驗 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys |
| ASTM E 566 | 黑色金屬的電磁(渦電流)分級 | Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals |
| ASTM E 571 | 鎳及鎳合金管形制品的電磁(渦電流)檢驗 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
| ASTM E 684 | 固體表面濺射深度仿形加工用大直徑離子束的電流密度近似測定的標準規程 | Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces |
| ASTM E 690 | 無磁熱交換管的現場電磁(渦電流)檢驗 | Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes |
| ASTM F 2550 | 通過電掃描電流流經管壁的振動確定下水管道漏洞方位的標準實施規程 | Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall |
| ASTM F 448 | 測量穩態原始光電流的標準試驗方法 | Test Method for Measuring Steady-State Primary Photocurrent |
| ASTM F 615M | 測定在半導體元件上噴鍍金屬的安全電流脈沖操作區域的標準實施規范(米制) | Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components [Metric] |
| ASTM F 676 | 測量不飽和的晶體管邏輯電路吸收電流的試驗方法 | Standard Test Method for Measuring Unsaturated TTL Sink Current |
| ASTM F769M | 測量晶體管和二極漏泄電流的標準試驗方法 | Standard Test Method for Measuring Transistor and Diode Leakage Currents Metric |
| ASTM G 100 | 循環電流梯級極化的測試方法 | Test Method for Conducting Cyclic Galvanostaircase Polarization |
| ASTM G 116 | 大氣電流腐蝕用繞線螺栓試驗 | Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion |
| ASTM G 71 | 電解液中電流腐蝕測試的實施和評定 | Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes |
| ASTM G 82 | 預測電流腐蝕特性用電流系列的制定和使用標準指南 | Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance |
| IEEE 1216 | 200A單相地下住宅分布用故障電流指示器的應用指南 | (Guide for the application of faulted circuit indicators for 200 A, single-phase underground residential distribution (URD)) |
| IEEE 1247 | 額定電壓在1000V以上選擇電流的斷路器開關 | (Interrupter switches for alternating current, rated above 1000 volts) |
| IEEE C 37.010 | 基于平衡電流的額定交流高壓斷路器應用指南 | (Application guide for AC high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.011 | 基于平衡電流的額定交流高壓斷路器瞬變恢復電壓應用指南 | (Application guide for transient recovery voltage for ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.012 | 基于平衡電流的額定交流高壓斷路器電容電流轉換的應用指南 | (Application guide for capacitance current switching for ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.013 | 基于平衡電流的交流高壓發電機斷路器 | (AC high-voltage generator circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.04a | 基于平衡電流的交流高壓斷路器的額定結構.修改件1:電容電流開關 | (Rating structure for AC high-voltage circuit breakers rated on an symmetrical current basis - Amendment 1: Capacitance current switching) |
| IEEE C 37.081 | 按平衡電流標定的交流高壓斷路器的綜合故障檢測指南 | (Guide for synthetic fault testing of ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.081a | 額定在均衡電流基礎上的交流高壓斷路器模擬故障試驗指南補充.8.3.2:終端故障恢復電壓.不平衡短路電流 | (Supplement to guide for synthetic fault testing of AC high-voltage circuit breakers rated on a symmetrical current basis - 8.3.2: Recovery voltage for terminal faults - Asymmetrical short-circuit curr) |
| IEEE C 37.09 | 基于平衡電流的額定交流高壓斷路器的試驗程序 | (Test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.11 | 對襯電流基礎上的AC高壓斷路器的電氣控制 | (Electrical control for AC high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.110 | 用于防護繼電的電流互感器使用指南 | (Guide for the application of current transformers used for protective relaying purposes) |
| IEEE C 57.110 | 施加非正弦負載電流的變壓器性能確定的推薦規程 | (Recommended practice for establishing transformer capability when supplying nonsinusoidal load currents) |
| IEEE C 57.12.59 | 干式變壓器直通故障電流持續時間指南 | (Guide for dry-type transformer through-fault current duration) |
| IEEE C 57.13.1 | 中繼電流變壓器現場試驗指南 | (Guide for field testing of relaying current transformers) |
| IEEE C 57.19.03 | 直流電流用套管的術語,要求和試驗規程 | (Requirements, terminology and test code for bushings for DC applications) |
| IEEE C 95.2 | 射頻能量和電流的符號 | (Radio-frequency energy and current-flow symbols) |
| UL 101 | 設備的泄漏電流 | (Leakage current for appliances ) |
| UL 1416 | 收音機和電視類設備用過電流和過溫度保護器 | (Overcurrent and overtemperature protectors for radio- and television-type appliances ) |
| UL 498A | 電流分接頭和適配器 | (Current taps and adapters ) |
| 編號 | 中文名稱 | 英文名稱 |