微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10099 | 氣壓傳動 缸筒 最終檢驗和驗收準則 | Pneumatic fluid power - Cylinders - Final examination and acceptance criteria |
| ISO 10100 | 液壓傳動 缸筒 驗收試驗 | Hydraulic fluid power - Cylinders - Acceptance tests |
| ISO 10360-1 Technical Corrigendum 1 | 產品幾何量技術規范(GPS).坐標式測量設備(CMM)的驗收和再鑒定試驗.第1部分:詞匯.技術勘誤1 | Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary; Technical Corrigendum 1 |
| ISO 10360-1 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第1部分:詞匯 兩種語言版 | Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary |
| ISO 10360-2 | 產品幾何量技術規范（GPS） 坐標測量機（CMMs）的驗收和復檢 第2部分：用于測量尺寸的CMM | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size |
| ISO 10360-3 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第3部分:旋轉臺的軸線作為第四軸線的坐標測量機 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis |
| ISO 10360-4 Technical Corrigendum 1 | 產品幾何量技術規范(GPS).坐標測量機(CMM)的驗收和復檢試驗.第4部分:用于掃描型坐標機.技術勘誤1 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode; Technical Corrigendum 1 |
| ISO 10360-4 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第4部分:用于掃描型坐標機 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode |
| ISO 10360-5 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第5部分:使用多觸針探測系統的坐標測量機 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems |
| ISO 10360-6 | 產品幾何量技術規范（GPS） 坐標測量機（CMMs）的驗收和復檢 第6部分：對計算高斯相關特性誤差的估計 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features |
| ISO 10425 | 石油和天然氣工業用鋼絲繩.最低要求和驗收條件 | Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance |
| ISO 10545-1 | 陶瓷磚 第1部分:抽樣和驗收條件 | Ceramic tiles - Part 1: Sampling and basis for acceptance |
| ISO 10725 | 散料驗收抽樣檢驗程序和抽樣方案 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| ISO 11474 | 金屬與合金的腐蝕 人工環境中的腐蝕試驗 采用鹽溶液間歇式噴射的加速戶外驗收試驗(疤點試驗) | Corrosion of metals and alloys - Corrosion test in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) |
| ISO 11970 | 鋼鑄件制造焊接焊接工藝的規范和驗收 | Specification and approval of welding procedures for production welding of steel castings |
| ISO 1217 | 容積式壓縮機 驗收試驗 | Displacement compressors - Acceptance tests |
| ISO 13448-1 | 基于優先分配原則(APP)的驗收取樣規程.第1部分:APP法指南 | Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach |
| ISO 13448-2 | 基于優先分配原則的驗收取樣規程.第2部分:按屬性驗收取樣用協調單個取樣方案 | Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| ISO 14231 | 熱噴涂 熱噴涂設備的驗收檢查 | Thermal spraying - Acceptance inspection of thermal spraying equipment |
| ISO 14560 | 按屬性驗收取樣規程.每百萬不合格產品中規定的質量等級 | Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million |
| ISO 14744-1 | 焊接 電子束焊接機的驗收檢驗 第1部分:原理和驗收條件 | Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions |
| ISO 14744-2 | 焊接 電子束焊接機的驗收檢驗 第2部分:加速電壓特性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics |
| ISO 14744-3 | 焊接 電子束焊接機的驗收檢驗 第3部分:電子束電流特性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics |
| ISO 14744-4 | 焊接 電子束焊接機的驗收檢驗 第4部分:焊接速度的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed |
| ISO 14744-5 | 焊接 電子束焊接機的驗收檢驗 第5部分:偏轉精度的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy |
| ISO 14744-6 | 焊接 電子束焊接機的驗收檢驗 第6部分:焊點位置穩定性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position |
| ISO 14982 | 農林機械 電磁兼容性 試驗方法和驗收標準 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria |
| ISO 15616-1 | 高質量焊接和切割用CO2激光射線機的驗收試驗.第1部分:通用原理和驗收條件 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions |
| ISO 15616-2 | 高質量焊接和切割用CO2激光射線機的驗收試驗.第2部分:靜態和動態準確度的測定 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy |
| ISO 15616-3 | 高質量焊接和切割用CO2激光射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure |
| ISO 16622 | 氣象學.聲吶風速計/溫度計.平均風速測量計的驗收試驗方法 | Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements |
| ISO 1708 | 臥式車床驗收條件 精度檢驗 | Acceptance conditions for general purpose parallel lathes; testing of the accuracy |
| ISO 17101 | 農業機械.旋轉和甩刀式割草機.投擲對象試驗和驗收標準 | Agricultural machinery - Rotary and flail mowers - Thrown-object test and acceptance criteria |
| ISO 17103 | 農用機械.旋轉式和甩刀式割草機.防護圍裙的試驗方法和驗收標準 | Agricultural machinery - Rotary and flail mowers - Test methods and acceptance criteria for protective skirts |
| ISO 17613-1 | 飲用水人工操作泵.選擇和驗收.第1部分:東南亞 | Manually operated pumps for drinking water - Selection and acceptance - Part 1: Southeast Asia |
| ISO 1834 | 起重用短環鏈 驗收總則 | Short link chain for lifting purposes - General conditions of acceptance |
| ISO 18414 | 按屬性驗收取樣規程.基于控制出廠質量信用原則的驗收零取樣系統 | Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality |
| ISO 19840 | 色漆和清漆.用防護漆系統對鋼結構的腐蝕防護.粗面上干膜厚度的測量和驗收標準 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
| ISO 21247 | 產品驗收的組合接受零點抽樣系統和過程控制規程 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| ISO 23079 | 鎂和鎂合金.回爐料.要求、分類和驗收 | Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance |
| ISO 2314 AMD 1 | 燃?xì)廨啓C(jī) 驗收試驗 修改1:聯合循環動力設備的驗收試驗 | Gas turbines - Acceptance tests; Amendment 1: Acceptance test for combined-cycle power plants |
| ISO 2314 Technical Corrigendum 1 | 燃?xì)廨啓C(jī) 驗收試驗 技術勘誤1 | Gas turbines - Acceptance tests; Technical Corrigendum 1 |
| ISO 2314 | 燃?xì)廨啓C(jī).驗收試驗 | Gas turbines; acceptance tests |
| ISO 2423 | 搖臂鉆床驗收條件 精度檢驗 | Acceptance conditions for radial drilling machines with the arm adjustable in height; Testing of accuracy |
| ISO 2701 | 一般用途非合金鋼絲繩用拉撥鋼絲 驗收條件 | Drawn wire for general purpose non-alloy steel wire ropes; Terms of acceptance |
| ISO 3189-1 Technical Corrigendum 1 | 通用鋼絲繩套.第1部分:一般特性和驗收條件.技術勘誤1 | Sockets for wire ropes for general purposes - Part 1: General characteristics and conditions of acceptance; Technical Corrigensdum 1 |
| ISO 3189-1 | 普通鋼絲繩用套管 第1部分:一般特性和驗收條件 | Sockets for wire ropes for general purposes; Part 1 : General characteristics and conditions of acceptance |
| ISO 3269 | 緊固件 驗收檢查 | Fasteners - Acceptance inspection |
| ISO 3408-3 | 滾珠絲杠.第3部分:驗收條件和驗收檢驗 | Ball screws - Part 3: Acceptance conditions and acceptance tests |
| ISO 3443-6 | 建筑公差 第6部分:驗收標準及根據尺度公差規定和統計控制進行驗收的一般原則 方法1 | Tolerances for building; Part 6 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control; Method 1 |
| ISO 3443-7 | 建筑公差 第7部分:驗收標準及根據尺度公差規定和統計控制進行驗收的一般原則 方法2(統計控制方法) | Tolerances for building; part 7: general principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control; method 2 (statistical control method) |
| ISO 3463 AMD 1 | 農林用輪式拖拉機 防護裝置 動態試驗方法和驗收條件 修改1 | Wheeled tractors for agriculture and forestry - Protective structures - Dynamic test method and acceptance conditions; Amendment 1 |
| ISO 3463 | 農林用輪式拖拉機 防護裝置 動態試驗方法和驗收條件 | Wheeled tractors for agriculture and forestry; protective structures; dynamic test method and acceptance conditions |
| ISO 3601-3 | 流體動力系統.O型密封圈.第3部分:質量驗收準則 | Fluid power systems - O-rings - Part 3: Quality acceptance criteria |
| ISO 3655 | 帶固定式或移動式工作臺的單柱或雙柱立式車鏜床驗收條件 總論和精度檢驗 | Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table; General introduction and testing of the accuracy |
| ISO 4094 | 紙、紙板和紙漿.試驗儀器的國際間校準.標準化和授權實驗室的驗收和任命 | Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories |
| ISO 4463-1 | 建筑物的測量方法 定線和測量 第1部分:計劃和組織、測量程序、驗收標準 | Measurement methods for building; setting-out and measurement; part 1: planning and organization, measuring procedures, acceptance criteria |
| ISO 5022 | 定型耐火制品 取樣和驗收試驗 | Shaped refractory products; Sampling and acceptance testing |
| ISO 5674 | 農林用拖拉機和機械.動力輸出軸護罩.強度和磨損試驗及驗收標準 | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria |
| ISO 5700 AMD 1 | 農林用輪式拖拉機 防護裝置 靜態試驗方法和驗收條件 修改1 | Wheeled tractors for agriculture and forestry - Protective structures - Static test method and acceptance conditions; Amendment 1 |
| ISO 5700 | 農林用輪式拖拉機 防護裝置 靜態試驗方法和驗收條件 | Wheeled tractors for agriculture and forestry; protective structures; static test method and acceptance conditions |
| ISO 5734 | 機床用機械分度頭驗收條件 精度檢驗 | Acceptance conditions of mechanical dividing heads for machine tools; Testing of accuracy |
| ISO 5948 | 鐵路車輛材料 超聲波驗收檢驗 | Railway rolling stock material - Ultrasonic acceptance testing |
| ISO 6361-1 | 加工鋁和鋁合金薄板、帶、厚板 第1部分:交貨和驗收的技術條件 | Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for inspection and delivery |
| ISO 6362-1 | 加工鋁和鋁合金擠壓棒/條材、管材和型材 第1部分:驗收和交貨的技術條件 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical conditions for inspection and delivery |
| ISO 6363-1 | 加工鋁和鋁合金冷拉棒/條材和管材 第1部分:驗收及交貨的技術條件 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions for inspection and delivery |
| ISO 6365-1 | 加工鋁和鋁合金冷拉線材 第1部分:驗收及交貨的技術條件 | Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection and delivery |
| ISO 6480 | 臥式內拉床驗收條件 精度檢驗 | Conditions of acceptance for horizontal internal broaching machines; Testing of the accuracy |
| ISO 6481 | 立式外拉床驗收條件 精度檢驗 | Acceptance conditions for vertical surface type broaching machines; Testing of accuracy |
| ISO 6545 | 滾齒機驗收條件 精度檢驗 | Acceptance conditions for gear hobbing machines; testing of the accuracy |
| ISO 6779 | 立式內拉床驗收條件 精度檢驗 | Acceptance conditions for broaching machines of vertical internal type; Testing of accuracy |
| ISO 6899 | 開式機械動力壓力機驗收條件 精度檢驗 | Acceptance conditions of open front mechanical power presses; Testing of the accuracy |
| ISO 6933 | 鐵路車輛材料 磁粉驗收檢驗 | Railway rolling stock material; magnetic particle acceptance testing |
| ISO 7007 | 木工機械 細木工帶鋸機 術語和驗收條件 | Woodworking machines; Table bandsawing machines; Nomenclature and acceptance conditions |
| ISO 7008 | 木工機械 有或無移動平臺的單片圓鋸機 術語和驗收條件 | Woodworking machines; Single blade circular saw benches with or without travelling table; Nomenclature and acceptance conditions |
| ISO 7009 | 木工機械 單軸銑機 術語和驗收條件 | Woodworking machines; Single spindle moulding machines; Nomenclature and acceptance conditions |
| ISO 7363 | 起重機和起重機械 技術性能和驗收文件 | Cranes and lifting appliances; Technical characteristics and acceptance documents |
| ISO 7568 | 木工機械 單面木工壓刨床 術語和驗收條件 | Woodworking machines; Thickness planing machines with rotary cutterblock for one-side dressing; Nomenclature and acceptance conditions |
| ISO 7569 | 木工機械 二、三、四面木工壓刨床 術語和驗收條件 | Woodworking machines; Planing machines for two-, three- or four-side dressing; Nomenclature and acceptance conditions |
| ISO 7570 | 木工機械 木工平壓兩用刨床 術語和驗收條件 | Woodworking machines; Surface planing and thicknessing machines; Nomenclature and acceptance conditions |
| ISO 7571 | 木工機械 單面木工平刨床 術語和驗收條件 | Woodworking machines; Surface planing machines with cutterblock for one-side dressing; Nomenclature and acceptance conditions |
| ISO 7722 | 重力鑄造、砂型鑄造、冷硬鑄造或由有關工藝生產的鋁合金鑄件 驗收和交貨的一般條件 | Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes; General conditions for inspection and delivery |
| ISO 7945 | 木工機械 立式單軸鉆床 術語和驗收條件 | Woodworking machines; Single spindle boring machines; Nomenclature and acceptance conditions |
| ISO 7946 | 木工機械 榫槽機 術語和驗收條件 | Woodworking machines; Slot mortising machines; Nomenclature and acceptance conditions |
| ISO 7947 | 木工機械 二、三、四面木工銑床 術語和驗收條件 | Woodworking machines; Two-, three- and four-side moulding machines; Nomenclature and acceptance conditions |
| ISO 7948 | 木工機械 鏤銑機 術語和驗收條件 | Woodworking machines; Routing machines; Nomenclature and acceptance conditions |
| ISO 7949 | 木工機械 膠合板板疊切邊機 術語和驗收條件 | Woodworking machines; Veneer pack edge shears; Nomenclature and acceptance conditions |
| ISO 7950 | 木工機械 單鏈鏈?zhǔn)介静蹤C(jī) 術語和驗收條件 | Woodworking machines; Single chain mortising machines; Nomenclature and acceptance conditions |
| ISO 7957 | 木工機械 搖臂式木工圓鋸機 術語和驗收條件 | Woodworking machines; Radial circular saws; Nomenclature and acceptance conditions |
| ISO 7958 | 木工機械 單鋸片往復木工鋸板機 術語和驗收條件 | Woodworking machines; Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels; Nomenclature and acceptance conditions |
| ISO 7959 | 木工機械 多鋸片縱剖木工圓鋸機 術語和驗收條件 | Woodworking machines; Double edging precision circular sawing machines; Nomenclature and acceptance conditions |
| ISO 7966 | 驗收控制圖 | Acceptance control charts |
| ISO 7983 | 木工機械 帶移動工作臺木工圓鋸機 術語及驗收條件 | Woodworking machines; single blade circular sawing machines with travelling table; nomenclature and acceptance conditions |
| ISO 7987 | 木工機械 木工車床 術語和驗收條件 | Woodworking machines; Turning lathes; Nomenclature and acceptance conditions |
| ISO 7988 | 木工機械 雙頭開榫機 術語和驗收條件 | Woodworking machines; double-end tenoning machines; nomenclature and acceptance conditions |
| ISO 8206 | 氧氣切割機驗收試驗 重復精度 工作特性 | Acceptance tests for oxygen cutting machines; reproducible accuracy; operational characteristics |
| ISO 8579-1 | 齒輪裝置驗收規程.第1部分:空氣載聲的試驗規程 | Acceptance code for gear units - Part 1: Test code for airborne sound |
| ISO 8579-2 | 齒輪驗收規則 第2部分:驗收試驗中齒輪裝置機械振動測定 | Acceptance code for gears; part 2: determination of mechanical vibrations of gear units during acceptance testing |
| ISO 8636-1 | 機床 龍門銑床的驗收條件 精度檢驗 第1部分:固定式龍門銑床 | Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 1: Fixed bridge (portal-type) machines |
| ISO 8636-2 | 龍門銑床的驗收條件 精度檢驗 第2部分:移動龍門銑床 | Acceptance conditions for plano-milling machines; testing of the accuracy; part 2: gantry-type machines |
| ISO 8956 | 整體式或非整體式車床用仿形裝置驗收條件 精度檢驗 | Acceptance conditions for copying attachments, integral or otherwise, for lathes; testing of the accuracy |
| ISO 9906 | 回轉動力泵 液壓性能驗收試驗 等級1和2 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 |
| ISO/IEC TR 14763-3 | 信息技術 用戶建筑群布纜的實現和操作 第3部分:光纜縛設的驗收測試 | () |
| ISO/TS 10303-1012 | 工業自動化系統和集成.產品數據表示和交換.第1012部分:應用模式:驗收 | Industrial automation systems and integration - Product data representation and exchange - Part 1012: Application module: Approval |
| ISO/TS 17477 | 使用2維移動光學型激光器的焊接和切割用CO2激光束機器的驗收試驗 | Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type |
| 編號 | 中文名稱 | 英文名稱 |