微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 12266-1 | 工業閥門 閥門試驗 第1部分：壓力試驗、試驗程序和驗收標準、強制要求 | Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria; Mandatory requirements |
| EN 12266-2 | 工業閥門 閥門試驗 第2部分：試驗、試驗程序和驗收標準 補充要求 | Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements |
| EN 12484-4 | 灌溉技術 自動草坪灌溉系統 第4部分：驗收和安裝 | Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance |
| EN 12517 | 焊縫的無損檢驗 焊接接頭放射線檢驗 驗收等級 | Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels |
| EN 1289-1998+A1 | 焊接的無損檢驗 焊接的熔深試驗 驗收等級 | Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels |
| EN 1291-1998+A1 | 焊接的無損檢驗 焊接的磁性粒子試驗 驗收等級 | Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels |
| EN 12952-15 | 水管鍋爐及附屬設備 第15部分：驗收試驗 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| EN 12953-11 | 殼式鍋爐 第11部分：驗收試驗 | Shell boilers - Part 11: Acceptance tests |
| EN 13121-1 | 地上使用的GRP罐和容器 第1部分：原材料 驗收條件和規格條件 | GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions |
| EN 1317-2 | 道路防護系統 第2部分：安全屏障的性能等級、碰撞試驗、驗收標準和試驗方法 | Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers |
| EN 1317-2/prA1 | 道路防護系統 第2部分：安全屏障的性能等級、碰撞試驗、驗收標準和試驗方法 修改A1 | Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers; Amendment A1 |
| EN 1317-3 | 道路防護系統 第3部分：碰撞防護墊的性能等級、碰撞試驗、驗收標準和試驗方法 | Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions |
| EN 1395 | 熱噴涂 熱噴涂設備的驗收檢驗 | Thermal spraying - Acceptance inspection of thermal spraying equipment |
| EN 13975 | 體外診斷用醫療設備驗收試驗的取樣方法 統計法 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| EN 1712 | 焊接無損檢驗 焊接接頭超聲波檢測 驗收水平 | Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels |
| EN 28206 | 氧氣切割機的驗收試驗 重復精度 工作特性 | Acceptance tests for oxygen cutting machines- Reproducible accuracy- Operational characteristics (ISO 8206:1991) |
| EN 60041 | 測定水輪機、蓄能泵和水泵-水輪機水力性能的現場驗收試驗 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines (IEC 60041:1991, modified) |
| EN 60193 | 水輪機、蓄能泵和水泵水輪機 模型驗收試驗 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (IEC 60193:1999) |
| EN 60383-1-1996+A11 | 標稱電壓1KV以上的架空線用絕緣子 第1部分：交流系統用陶瓷或玻璃絕緣子單元定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria (IEC 60383-1:1993) |
| EN 60383-2 | 標稱電壓高于1000V以上的架空線路用絕緣子 第2部分：交流電路系統絕緣子串和絕緣子組 定義、試驗方法和驗 | Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria (IEC 60383-2:1993) |
| EN 60514 | 2級交流電度表的驗收方法 | Acceptance inspection of class 2 alternating-current watthour meters (IEC 60514:1975, modified) |
| EN 60953-1 | 汽輪機熱力驗收試驗規范 第１部分：方法Ａ 適用于大容量凝汽式汽輪機的高精度規范 | Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines (IEC 60953-1:1990) |
| EN 60953-2 | 汽輪機熱力驗收試驗規范 第２部分：方法Ｂ 適用于各種類型和容量汽輪機的較寬精度和規范 | Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines (IEC 60953-2:1990) |
| EN 60953-3 | 汽輪機熱力驗收試驗規范 第３部分： | Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines (IEC 60953-3:2001) |
| EN 61064 | 汽輪機速度控制系統驗收試驗 | Acceptance tests for steam turbine speed control systems (IEC 61064:1991) |
| EN 61223-3-1 | 醫用成像部門的評定及例行試驗 第3-1部分：驗收試驗 X-射線攝影和X射線透視設備的圖像性能 | Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999) |
| EN 61223-3-2 | 醫用成像部門的評定及例行試驗 第3-2部分：驗收試驗 乳腺攝影X-射線設備圖像性能 | Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996) |
| EN 61223-3-3 | 醫用成像部門的評定及例行試驗 第3-3部分：驗收試驗 數字減影血管造影X-射線設備的圖像性能 | Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA) (IEC 61223-3-3:1996) |
| EN 61223-3-4 | 醫用成像部門的評定及例行試驗 第3-4部分：驗收試驗 牙科X射線設備的圖像性能 | Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance test- Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000) |
| EN 61325 | 標稱電壓1000V以上的架空線用絕緣子 直流系統用陶瓷或玻璃絕緣子單元 定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995) |
| EN 61358 | 直接接入靜止式交流有功瓦時計(1級和2級)的驗收檢驗 | Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) (IEC 61358:1996) |
| EN 818-1-1996+AC | 提升用短節鏈條 安全 第1部分：一般驗收條件 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
| EN ISO 10360-1-2000+AC | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第1部分：詞匯 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000) |
| EN ISO 10360-2 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第2部分：所用的坐標測量機械或測量尺寸 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used or measuring size (ISO 10360-2:2001) |
| EN ISO 10360-3 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第3部分：旋轉臺的軸線作為第四軸線的坐標測 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with a axis of a rotary table as the fourth axis (ISO 10360-3:2000) |
| EN ISO 10360-4-2000+AC | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第4部分：用于掃描型坐標機 | Geometrical Product Specifications (GPS) - Aceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000) |
| EN ISO 10360-5 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第5部分：使用多觸針探測系統的坐標測量機 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems (ISO 10360-5:2000) |
| EN ISO 10360-6 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第6部分：計算高斯相關特性中誤差的評估 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001) |
| EN ISO 10545-1 | 陶瓷磚 第1部分：抽樣和驗收條件 | Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995) |
| EN ISO 11546-2 | 聲學 隔聲罩隔聲性能的測定 第2部分：現場測量(驗收和鑒定用) | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| EN ISO 14744-1 | 焊接 電子束焊接機的驗收檢驗 第1部分：原理和驗收條件 | Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000) |
| EN ISO 14744-2 | 焊接 電子束焊接機的驗收檢驗 第2部分：加速電壓特性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000) |
| EN ISO 14744-3 | 焊接 電子束焊接機的驗收檢驗 第3部分：電子束電流特性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000) |
| EN ISO 14744-4 | 焊接 電子束焊接機的驗收檢驗 第4部分：焊接速度的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000) |
| EN ISO 14744-5 | 焊接 電子束焊接機的驗收檢驗 第5部分：偏轉精度的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000) |
| EN ISO 14744-6 | 焊接 電子束焊接機的驗收檢驗 第6部分：焊點位置穩定性的測量 | Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000) |
| EN ISO 14982 | 農林機械 電磁兼容性 試驗方法和驗收標準 | Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| EN ISO 15609-2 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第2部分：氣焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001) |
| EN ISO 15614-11 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第11部分：電子和激光束焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
| EN ISO 15614-8 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第8部分：管對管板接頭焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) |
| EN ISO 15616-1 | 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第1部分：一般原則、驗收條件 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003) |
| EN ISO 15616-2 | 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第2部分：靜止及動態精度的測量 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003) |
| EN ISO 15616-3 | 高質量焊接及切割用二氧化碳激光束機的驗收試驗 第3部分：氣流量及氣壓測量儀的校正 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003) |
| EN ISO 3269 | 緊固件 驗收檢查 | Fasteners - Acceptance inspection (ISO 3269:2000) |
| EN ISO 9906 | 回轉動力泵 液壓性能驗收試驗 等級1和2 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999) |
| ENV 1317-4 | 道路防護系統 第4部分：安全屏障的終端和過度性能等級、碰撞試驗、驗收標準和試驗方法 | Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers |
| prEN 12266-3 | 工業閥門 交貨技術條件 第3部分：試驗程序和驗收標準 | Industrial valves - Technical conditions of delivery - Part 3: Test procedures and acceptance criteria |
| prEN 13231-1 | 鐵路設備 軌道 工程驗收 第1部分：軌道工程 | Railway applications - Track; Acceptance of works - Part 1: Work on track; Plain line |
| prEN 13231-2 | 鐵路設備 軌道 工程驗收 第2部分：道岔和通口工程 | Railway applications - Track; Acceptance of works - Part 2: Work on switches and crossings |
| prEN 13231-3 | 鐵路設備 軌道 工程驗收 第3部分：鐵軌磨光、銑削和軌道噴鍍工程驗收 | Railway applications - Track; Acceptance of works - Part 3: Acceptance of rail grinding, milling and plaining work in track |
| prEN 1358 | 木地板(包括拼花地板)和木鑲板及包層木板 一般驗收、標志和交貨規則 | Wood flooring (including parquet) and wood pannelling and cladding; general acceptance; marking and delivery rules |
| prEN 13741 | 機械通風管組水冷塔的熱能驗收試驗 | Thermal performance acceptance testing of mechanical draught series wet cooling towers |
| prEN 13979-1 | 鐵路設備 輪副及轉向架，輪子，技術驗收程序 第1部分：鍛制輪和軋制輪 | Railway applications - Wheelsets and bogies, Monobloc wheels; Technical approval procedure - Part 1: Forged and rolled wheels |
| prEN 14343 | 容積泵 驗收性能試驗 | Rotary positive displacement pumps - Performance tests for acceptance |
| prEN ISO 15607 | 金屬焊接工藝的規范及驗收 一般規則 | Specification and qualification of welding procedures for metallic materials - General rules (ISO/FDIS 15607:2003) |
| prEN ISO 15609-1 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第1部分：電弧焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO/DIS 15609-1:2000) |
| prEN ISO 15609-3 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第3部分：電子束焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO/DIS 15609-3:2000) |
| prEN ISO 15609-4 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第4部分：激光束焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000) |
| prEN ISO 15609-5 | 金屬焊接工藝的規范和驗收 焊接工藝規范 第5部分：電阻焊 | Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO/DIS 15609-5:2000) |
| prEN ISO 15610 | 金屬焊接工藝的規范和驗收 用經批準的焊接消耗材料驗收 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO/FDIS 15610:2003) |
| prEN ISO 15611 | 金屬焊接工藝的規范和驗收 用焊接經驗進行驗收 | Specification and qualification of welding procedures for metallic materials - AQualification based on previous welding experience (ISO/FDIS 15611:2003) |
| prEN ISO 15612 | 金屬焊接工藝的規范和驗收 用標準焊接工藝進行驗收 | Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure (ISO/DIS 15612:2000) |
| prEN ISO 15613 | 金屬焊接工藝的規范和驗收 用試生產試驗進行驗收 | Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO/FDIS 15613:2003) |
| prEN ISO 15614-1 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第1部分：鋼的電弧焊和氣焊及鎳和鎳合金的焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/FDIS 15614-1:2003) |
| prEN ISO 15614-10 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第10部分：超基干焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbasic dry welding (ISO/DIS 15614-10:2000) |
| prEN ISO 15614-12 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第12部分：點焊、縫焊及凸焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, sean and projection welding (ISO/DIS 15614-12:2000) |
| prEN ISO 15614-2 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第2部分：鋁及其合金的電弧焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000) |
| prEN ISO 15614-5 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第5部分：鈦、鋯及其合金的電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2003) |
| prEN ISO 15614-9 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第9部分：水下超基濕焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 9: Underwater hyperbasic wet welding (ISO/DIS 15614-9:2000) |
| prEN ISO 19840 | 油漆和清漆 用防護漆對鋼結構粗表面進行防腐 干膜厚度的測量及驗收標準 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness of coatings on rough surfaces (ISO/FDIS 19840:2003) |
| prENV 14033-1 | 鐵路設備 軌道裝置 維修和鋪設機械的驗收條件 第1部分：軌道車輛的運行 | Railway applications - Track - Approval conditions for construction and maintenance machines - Part 1: Running of railbound machines |
| SY/T 4103 | 鋼質管道焊接及驗收 | Welding and acceptance standard for steel Pipings and pipelines |
| 編號 | 中文名稱 | 英文名稱 |