微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| 05/30111735 DC | ISO 4141-2:道路車輛.多芯電纜.第2部分:高性能鎧裝電纜的試驗方法和要求 | ISO 4141-2: Road vehicles - Multi-core cables - Part 2: Test methods and requirements for high performance sheathed cables |
| IEC 60034-2 AMD 1 | 旋轉電機 第2部分:旋轉電機損耗和效率的試驗測定方法(不包括牽引車輛用電機) 修改1 | Rotating electrical machines - Part 2: Methods of determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles); Amendment 1 |
| IEC 60034-2 AMD 2 | 旋轉電機 第2部分:旋轉電機損耗和效率的試驗測定方法(不包括牽引車輛用電機) 修改2 | Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles); Amendment 2 |
| IEC 60034-2-1 | 旋轉電機.第2-1部分:試驗(不包括牽引車輛用電機)中損失和功效的測定用標準方法 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| IEC 60034-2A | 旋轉電機 第2部分:旋轉電機損耗和效率的試驗測定方法(不包括牽引車輛用電機) 補充1:用量熱法測定損耗 | Rotating electrical machines; part 2: methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicules); first supplement: measurement of losses by the calorimetric method |
| IEC 60077-1 | 鐵路應用 機車車輛用電氣設備 第1部分:一般運行條件和一般規則 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| IEC 60077-2 | 鐵路應用 機車車輛用電氣設備 第2部分:電工元件 一般規則 | Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules |
| IEC 60077-3 | 鐵路應用 機車車輛用電氣設備 第3部分：電工元件 直流斷路器用規則 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components; Rules for d.c. circuit-breakers |
| IEC 60077-4 | 鐵路設施.機車車輛用電氣設備.第4部分:電工元件.交流斷路器規則 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components; Rules for AC circuit-breakers |
| IEC 60077-5 | 鐵路設施.機車車輛用電氣設備.第5部分:電工元件.HV熔斷器規則 | Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components; Rules for HV fuses |
| IEC 60095-4 AMD 1 | 鉛酸起動蓄電池組 第4部分:重型卡車用的蓄電池組尺寸 修改1 | Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy trucks; Amendment 1 |
| IEC 60095-4 | 鉛酸起動蓄電池組 第4部分:重型卡車用的蓄電池組尺寸 | Lead-acid starter batteries; part 4: dimensions of batteries for heavy trucks |
| IEC 60310 | 鐵路設施.鐵路車輛用牽引變壓器和電感器 | Railway applications - Traction transformers and inductors on board rolling stock |
| IEC 60322 | 鐵路應用 機車車輛的電氣設備 開敞式結構電力電阻器的規則 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
| IEC 60335-2-95 AMD 1 | 修改件1.家用和類似用途電器.安全.第2-95部分:住宅用垂直移動汽車庫門驅動裝置的特殊要求 | Amendment 1 - Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| IEC 60335-2-95 Edition 2.1 | 家用和類似用途電器的安全.第2-95部分:住宅用垂直移動汽車庫門驅動裝置的特殊要求 | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| IEC 60335-2-95 | 家用和類似用途電器的安全.第2-95部分:住宅用垂直移動汽車庫門驅動裝置的特殊要求 | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| IEC 60349-1 AMD 1 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子交流器供電的交流電動機之外的旋轉電機.修改1 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors; Amendment 1 |
| IEC 60349-1 Edition 1.1 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-1 | 電力牽引 鐵路與道路車輛用旋轉電機 第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-2 | 電力牽引.鐵路與道路車輛用旋轉電機.第2部分:電子變流器供電的交流電動機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current motors |
| IEC 60357 AMD 1 | 鹵鎢燈(非車輛用).性能規范.修改件1 | Tungsten halogen lamps (non-vehicle) - Performance specifications; Amendment 1 |
| IEC 60357 | 鹵鎢燈(非車輛用).性能規范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| IEC 60364-7-708 | 低壓電氣設施.第7-708部分:特殊設施或場所的要求.旅游車停車場、野營停車場和類似場所 | Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations |
| IEC 60364-7-721 | 低壓電氣裝置.第7-721部分:特殊裝置或位置的要求.居住掛車和電動居住掛車的電氣裝置 | Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans |
| IEC 60432-3 AMD 1 | 修改件1.白熾燈.安全規范.第3部分:鎢鹵燈(非車用) | Amendment 1 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3 Edition 1.1 | 白熾燈.安全規范.第3部分:鎢鹵燈(非車用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60432-3 | 白熾燈.安全規范.第3部分:鹵鎢燈(非車用) | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| IEC 60494-1 | 鐵路設施.機車車輛.受電弓.特征和試驗.第1部分:干線車輛用受電弓 | Railway applications - Rolling stock; Pantographs; Characteristics and tests - Part 1: Pantographs for mainline vehicles |
| IEC 60494-2 | 鐵路設施.機車車輛.導電弓架.特性和試驗.第2部分:地下鐵路和輕軌車輛用導電弓架 | Railway applications - Rolling stock; Pantographs; Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
| IEC 60571 AMD 1 | 鐵路機車用電子設備.修改件1 | Electronic equipment used on rail vehicles; Amendment 1 |
| IEC 60571 Edition 2.1 | 用于有軌機動車上的電子設備 | Electronic equipment used on rail vehicles |
| IEC 60571 | 鐵路車輛用電子設備 | Electronic equipment used on rail vehicles |
| IEC 60600 | 坑口品位分析和礦車中放射性礦物分類用設備 | Equipment for minehead assay and sorting radioactive ores in containers |
| IEC 60721-3-5 | 環境條件分類 第3部分:環境參數組及其嚴酷程度的分類分級 第5節:地面車輛上的設備 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
| IEC 60809 AMD 1 | 道路機動車輛用鎢絲燈 尺寸、電及光的要求 修改1 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 1 |
| IEC 60809 AMD 2 | 道路車輛用燈.尺寸、電和照明要求.修改2 | Lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 2 |
| IEC 60809 AMD 3 | 道路車輛用燈.尺寸、電及光的要求.修改件3 | Lamps for road vehicles - Dimensional, electrical and luminous requirements; Amendment 3 |
| IEC 60809 Edition 2.2 | 道路車輛燈.尺寸,電氣和亮度要求 | Lamps for road vehicles - Dimensional, electrical and luminous requirements |
| IEC 60809 Edition 2.3 | 道路車輛用燈.尺寸、電及光的要求 | Lamps for road vehicles - Dimensional, electrical and luminous requirements |
| IEC 60809 | 道路車輛用白熾燈.尺寸、電氣和照明要求 | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements |
| IEC 60810 | 道路車輛用燈.性能要求 | Lamps for road vehicles - Performance requirements |
| IEC 60839-10-1 | 報警系統 第10部分:道路車輛用報警系統 第1節:客車 | Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars |
| IEC 61133 | 鐵道設施.鐵道車輛.車輛組裝后和運行前的整車試驗 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| IEC 61287-1 | 鐵路設施.安裝在鐵路機車上的電力變流器.第1部分:特性和試驗方法 | Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 61373 | 鐵路應用 機車車輛設備 沖擊和振動試驗 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 61375-1 | 電氣鐵路設備.列車總線.第1部分:列車通信網絡 | Electric railway equipment - Train bus - Part 1: Train communication network |
| IEC 61375-2 | 道路電氣設備.列車總線.第2部分:列車通信網的合格測試 | Electric railway equipment - Train bus - Part 2: Train communication network conformance testing |
| IEC 61377-1 | 鐵路設施.鐵路車輛.逆變器供電的交流電動機及其控制系統的聯合試驗 | Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system |
| IEC 61377-2 | 鐵路設施.機車車輛.聯合試驗.第2部分:反向直流牽引電動機及其控制設備 | Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control |
| IEC 61377-3 | 鐵路設施.鐵路車輛.第3部分:交流電動機,間接變流器及其他控制系統的聯合檢驗 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| IEC 61851-1 | 電動車輛充電系統 第1部分：一般要求 | Electric vehicle conductive charging system - Part 1: General requirements |
| IEC 61851-21 | 電動車輛導電充電系統 第21部分：導電連接至交流/直流電源的電動車輛要求 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| IEC 61851-22 | 電動車輛導電充電系統 第22部分：交流電動車輛充電站 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| IEC 61881 | 鐵路應用 機車車輛設備 電力電子設備用電容器 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| IEC 61982-1 | 電動道路車輛推進用蓄電池.第1部分:試驗參數 | Secondary batteries for the propulsion of electric road vehicles - Part 1: Test parameters |
| IEC 61982-2 | 電動道路車輛驅動用二次電池.第2部分:動態放電性能試驗和動態耐久試驗 | Secondary batteries for the propulsion of electric road vehicles - Part 2: Dynamic discharge performance test and dynamic endurance test |
| IEC 61982-3 | 電動道路車輛的推進器用蓄電池組 第3部分：性能和壽命試驗（交通適合的，市區用車輛） | Secondary batteries for the propulsion of electric road vehicles - Part 3: Performance and life testing (traffic compatible, urban use vehicles) |
| IEC 61991 | 鐵路應用 機車車輛 防電氣危險的保護措施 | Railway applications - Rolling stock - Protective provisions against electrical hazards |
| IEC 62022 | 由車輛運輸?shù)目稍倮没虿豢稍倮貌牧现笑幂椛涞目刂坪蜋z測用已裝好的監測器 | Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
| IEC 62196-1 | 插頭、插座、車輛耦合器和引入線.電氣車輛傳導充電.第1部分:250A a.c 和400A d.c以下的電氣車輛的充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. |
| IEC 62209-1 | 人暴露于手持和車載無線通信設備產生的射頻場.人體模型、儀器和規程.第1部分:緊貼耳朵使用的手持設備(頻率 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) |
| IEC 62236-3-1 | 鐵路設施.電磁兼容性.第3-1部分:鐵道車輛.列車和成套車輛 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
| IEC 62236-3-2 | 鐵路設施.電磁兼容性.第3-2部分:鐵道車輛.裝置 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock; Apparatus |
| IEC 62236-4 | 鐵路設施.電磁兼容性.第4部分:鐵道車輛.信號傳輸及遠程通信裝置的電磁輻射和抗擾性 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
| IEC 62236-5 | 鐵路設施.電磁兼容性.第5部分:鐵道車輛.固定式電源設備和裝置的輻射和抗擾性 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| IEC 62427 | 鐵路設施.全部車輛和火車探測系統間的兼容性 | Railway applications - Compatibility between rolling stock and train detection systems |
| IEC/TR 60721-4-5 AMD 1 | 環境條件分類.第4-5部分:IEC 60721-3的環境條件類別與IEC 60068的環境試驗的相互關系及轉換的指南.地面車輛 | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Ground vehicle installations; Amendment 1 |
| IEC/TR 60721-4-5 Edition 1.1 | 環境條件分類.第4-5部分:IEC 60721-3的環境條件類別與IEC 60068的環境試驗的相互關系及轉換的指南.地面車輛 | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Ground vehicle installations |
| IEC/TR 60721-4-5 | 環境條件分類 第4 5部分：IEC60721 3的環境條件類別與IEC60068的環境試驗的相互關系及轉換的指南 地面 | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Ground vehicle installations |
| IEC/TR 60783 | 電動汽車的布線和連接器 | Wiring and connectors for electric road vehicles |
| IEC/TR 60784 | 電動汽車用儀器儀表 | Instrumentation for electric road vehicles |
| IEC/TR 60785 | 電動汽車用旋轉電機 | Rotating machines for electric road vehicles |
| IEC/TR 60786 | 電動汽車用控制器 | Controllers for electric road vehicles |
| IEC/TR2 60349-3 | 電力牽引 鐵路和道路車輛用旋轉電機 第3部分:用組件損耗總和確定變流器供電的交流電動機的總損耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses |
| IEC/TR2 61382-1 | 電動汽車動力設備用鎳鎘可充電電池和蓄電池組 第1部分:動態放電性能試驗(DPPT)和動態耐久性試驗(DET) | Nickel/cadmium rechargeable cells and batteries for electric road vehicle propulsion applications - Part 1: Dynamic discharge performance test (DDPT) and dynamic endurance test (DET) |
| IEC/TS 61287-2 | 安裝在鐵路機車車輛上的電力變流器 第2部分：增補技術信息 | Power convertors installed on board rolling stock - Part 2: Additional technical information |
| ISO 1005-1 | 鐵路車輛材料 第1部分:牽引和拖動的粗軋車輪 交貨技術條件 | Railway rolling stock material - Part 1: Rough-rolled tyres for tractive and trailing stock; technical delivery conditions |
| ISO 1005-2 | 鐵路車輛材料 第2部分:牽引和拖動的車輪、輪體和輪箍 尺寸、平衡和組裝要求 | Railway rolling stock material; Part 2 : Tyres, wheel centres and tyred wheels for tractive and trailing stock; Dimensional, balancing and assembly requirements |
| ISO 1005-3 | 鐵路車輛材料 第3部分:牽引和拖動的輪軸 質量要求 | Railway rolling stock material; Part 3 : Axles for tractive and trailing stock; Quality requirements |
| ISO 1005-4 | 鐵路車輛材料 第4部分:牽引和拖動的車輪的軋制或鍛造的輪體 質量要求 | Railway rolling stock material; Part 4 : Rolled or forged wheel centres for tyred wheels for tractive and trailing stock; Quality requirements |
| ISO 1005-6 | 鐵路車輛材料 第6部分:牽引和拖動車輪實心輪 交貨技術條件 | Railway rolling stock material - Part 6: Solid wheels for tractive and trailing stock; technical delivery conditions |
| ISO 1005-7 | 鐵路車輛材料 第7部分:牽引和拖動的輪副 質量要求 | Railway rolling stock material; Part 7 : Wheelsets for tractive and trailing stock; Quality requirements |
| ISO 1005-8 | 鐵路車輛材料 第8部分:牽引和拖動的車輪實心輪 尺寸和平衡要求 | Railway rolling stock material; Part 8 : Solid wheels for tractive and trailing stock; Dimensional and balancing requirements |
| ISO 1005-9 | 鐵路車輛材料 第9部分:牽引和拖動的輪軸 尺寸要求 | Railway rolling stock material; Part 9 : Axles for tractive and trailing stock; Dimensional requirements |
| ISO 10056 | 機械振動 有軌車輛中乘客和乘務員全身振動的測量和分析 | Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| ISO 10190 | 摩托車鏈條 特性和試驗方法 | Motor cycle chains; characteristics and test methods |
| ISO 10191 AMD 1 | 乘用車輪胎 檢驗輪胎負荷 實驗室試驗法 修改1 | Passenger car tyres - Verifying tyre capabilities - Laboratory test methods; Amendment 1 |
| ISO 10191 | 乘用車輪胎 檢驗輪胎負荷 實驗室試驗法 | Passenger car tyres - Verifying tyre capabilities - Laboratory test methods |
| ISO 10230 | 自行車 鍵槽后軸身和飛輪 配合尺寸 | Cycles; splined hub and sprocket; mating dimensions |
| ISO 10231 | 摩托車輪胎.驗證輪胎性能的試驗方法 | Motorcycle tyres - Test methods for verifying tyre capabilities |
| ISO 10245-2 | 起重機 限制器和指示器 第2部分:汽車起重機 | Cranes - Limiting and indicating devices - Part 2: Mobile cranes |
| ISO 10268 | 土方機械 自卸車和拖式鏟運機的減速器 性能試驗 | Earth-moving machinery; retarders for dumpers and tractor-scrapers; performance tests |
| ISO 10326-1 AMD 1 | 機械振動.車輛座椅振動評估用實驗室方法.第1部分:基本要求.修改件1 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements; Amendment 1 |
| ISO 10326-1 | 機械振動 評價車輛座椅振動的實驗室方法 第1部分:基本要求 | Mechanical vibration; laboratory method for evaluating vehicle seat vibration; part 1: basic requirements |
| ISO 10326-2 | 機械振動 車輛座位振動的實驗室評價方法 第2部分：在鐵路車輛中的應用 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 2: Application to railway vehicles |
| ISO 10333-4 | 人員墜落救護系統.第4部分:垂直下落和滑動型下落救護車連接的垂直升降索道 | Personal fall-arrest systems - Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester |
| ISO 10355 | 輕便摩托車.照明和光信號裝置的定位 | Mopeds - Positioning of lighting and light-signalling devices |
| ISO 10392 | 雙軸道路車輛 重力中心測定 | Road vehicles with two axles; determination of centre of gravity |
| ISO 1044 | 工業車輛 電動車輛牽引用鉛酸蓄電池 優先選用的電壓 | Industrial trucks; lead-acid traction batteries for electric trucks; preferred voltages |
| ISO 10454 | 載重汽車和公共汽車輪胎 檢驗輪胎負荷 實驗室試驗法 | Truck and bus tyres; verifying tyre capabilities; laboratory test methods |
| ISO 10455 | 道路車輛 采用旋轉式高壓分電器的干燥點火線圈 | Road vehicles; dry ignition coils using rotating high-voltage distributor |
| ISO 10483-1 | 道路車輛.智能動力開關.第1部分:高側智能動力開關 | Road vehicles - Intelligent power switches - Part 1: High-side intelligent power switch |
| ISO 10483-2 | 道路車輛 智能動力開關 第2部分:低側智能動力開關 | Road vehicles - Intelligent power switches - Part 2: Low-side intelligent power switch |
| ISO 10486 | 乘用車 轎車無線電設備識別號(CRIN) | Passenger cars; car radio identification number (CRIN) |
| ISO 10487-1 | 乘用車收音機連接 第1部分:尺寸及一般要求 | Passenger car radio connections; part 1: dimensions and general requirements |
| ISO 10487-2 | 乘用車 車用收音機連接 第2部分:性能要求 | Passenger cars - Connections for car radios - Part 2: Performance requirements |
| ISO 10499-1 Technical Corrigendum 1 | 工業車輛輪胎和輪輞 充氣輪胎輪輞用實心輪胎(米制系列) 名稱、尺寸和標志 技術勘誤1 | Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking; Technical Corrigendum 1 |
| ISO 10499-1 | 工業車輛輪胎和輪輞 充氣輪胎輪輞用實心輪胎(米制系列) 名稱、尺寸和標志 | Industrial tyres and rims - Solid tyres (metric series) for pneumatic tyre rims - Part 1: Designation, dimensions and marking |
| ISO 10499-2 | 工業車輛輪胎和輪輞 充氣輪胎輪輞用實心輪胎(米制系列) 第2部分:額定荷載值 | Industrial tyres and rims - Rubber solid tyres (metric series) for pneumatic tyre rims - Part 2: Load ratings |
| ISO 10500 | 工業車輛輪胎和輪輞 圓柱和斜底橡膠實心輪胎(米制系列) 名稱、尺寸和標志 | Industrial tyres and rims; cylindrical and conical base rubber solid tyres (metric series); designation, dimensions and marking |
| ISO 10521-1 | 道路車輛.道路負荷.第1部分:在參照大氣壓狀態測定道路負荷 | Road vehicles - Road load - Part 1: Determination under reference atmospheric conditions |
| ISO 10521-2 | 道路車輛.道路負荷.第2部分:框架測力計再現 | Road vehicles - Road load - Part 2: Reproduction on chassis dynamometer |
| ISO 10525 | 6m及6m以上長度平衡重式貨運集裝箱搬運車 附加穩定性試驗 | Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests |
| ISO 10542-1 | 殘疾人或行動障礙人用技術系統和設備 輪椅鉗制和乘車人固定系統 第1部分：對所有系統的要求和試驗方法 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems |
| ISO 10542-2 | 殘疾人或行動障礙人用技術系統和設備 輪椅鉗制和乘車人固定系統 第2部分：4點帶型鉗制系統 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 2: Four-point strap-type tiedown systems |
| ISO 10542-3 | 殘疾人或行動障礙人用技術系統和輔助設備.輪椅鉗制和乘車人固定系統.第3部分:對接式鉗制系統 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 3: Docking-type tiedown systems |
| ISO 10542-4 | 殘疾人或行動障礙人用技術系統和輔助設備.輪椅系固裝置和乘車人約束系統.第4部分:夾緊式系固裝置 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 4: Clamp-type tiedown systems |
| ISO 10542-5 | 殘疾人或行動障礙人用技術設備和輔助裝置.輪椅系固裝置和乘車人安全束護系統.第5部分:專門輪椅設備 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 5: Systems for specific wheelchairs |
| ISO 10570 | 土方機械.鉸接車架鎖定裝置.性能要求 | Earth-moving machinery - Articulated frame lock - Performance requirements |
| ISO 10597 | 道路車輛.商用車輛用平面連接固定螺母.試驗方法 | Road vehicles - Flat attachment fixing nuts for commercial vehicles - Test methods |
| ISO 10599-1 | 轎車收音機 同軸天線連接器 第1部分:尺寸 | Car radios; coaxial aerial connectors; part 1: dimensions |
| ISO 10599-2 Technical Corrigendum 1 | 轎車收音機.同軸天線連接器.第2部分:特征值、性能要求和試驗.技術勘誤1 | Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests; Technical Corrigendum 1 |
| ISO 10599-2 | 轎車收音機 同軸天線連接器 第2部分:特征評定、性能要求和試驗 | Car radios - Coaxial aerial connectors - Part 2: Characteristic values, performance requirements and tests |
| ISO 10604 | 道路車輛 前照燈光束定位測量設備 | Road vehicles; measurement equipment for orientation of headlamp luminous beams |
| ISO 10605 | 道路車輛 靜電放電產生的電干擾的測試方法 | Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
| ISO 10658 | 工業車輛在由動力裝置側移載荷條件下堆垛作業 附加穩定性試驗 | Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices - Additional stability test |
| ISO 1074 | 平衡式叉車 穩定性試驗 | Counterbalanced fork-lift trucks; stability tests |
| ISO 10815 | 機械振動 列車通過鐵路隧道時的振動測量 | Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains |
| ISO 10841 | 航空器 大型飛機用餐飲服務車 功能要求 | Aircraft - Catering vehicle for large capacity aircraft - Functional requirements |
| ISO 10844 | 聲學 測量道路車輛發射的噪聲用的試驗車道的規范 | Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles |
| ISO 10997 | 乘用車 與可變形障礙壁的側碰撞 實車試驗 | Passenger vehicles - Side impact with deformable moving barrier - Full scale test |
| ISO 1102 | 商用道路車輛 直徑50mm的牽引桿連接器 互換性 | Commercial road vehicles - 50 mm drawbar eye - Interchangeability |
| ISO 1103 | 道路車輛.旅居掛車和輕型掛車的連接球.尺寸 | Road vehicles - Coupling balls for caravans and light trailers - Dimensions |
| ISO 11041 | 車間空氣 砷、砷化合物懸浮粒子和三氧化二砷蒸氣的測定 氫化法和原子吸收光譜法 | Workplace air - Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour - Method by hydride generation and atomic absorption spectrometry |
| ISO 11077 | 航空航天 自行式除冰和防冰車 功能要求 | Aerospace; self-proppelled de-icing/anti-icing vehicles; functional requirements |
| ISO 11096 | 道路車輛.行人防護.行人的大腿,腿和膝蓋的沖擊試驗方法 | Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee |
| ISO 11157 | 道路車輛.制動襯片組件.慣性功率計試驗方法 | Road vehicles - Brake lining assemblies - Inertia dynamometer test method |
| ISO 11174 | 車間空氣和鎘化合物懸浮粒子的測定 燃燒和電熱原子吸收光譜法 | Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electrothermal atomic absorption spectrometric method |
| ISO 11243 | 自行車 自行車衣架 術語、分類和試驗 | Cycles - Luggage carriers for bicycles - Concepts, classification and testing |
| ISO 11406 Technical Corrigendum 1 | 商用道路車輛.帶尾部連接器的牽引車輛和牽引桿式掛車間的機械連接.互換性.技術勘誤1 | Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability; Technical Corrigendum 1 |
| ISO 11406 | 商用道路車輛 帶尾部連接器的牽引車輛和牽引桿式掛車間的機械連接 互換性 | Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability |
| ISO 11407 | 商用道路車輛.尾部帶向前和向下連接器的牽引車和中軸掛車間的機械連接.互換性 | Commercial road vehicles - Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers - Interchangeability |
| ISO 11425 | 機動車液壓轉向裝置用橡膠軟管和軟管組件 規范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| ISO 11439 | 氣瓶 車上貯存機動車用天然氣燃料用高壓氣瓶 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| ISO 11446 | 道路車輛.牽引車和受牽引車輛間的電氣連接用連接器.具有12V標定電源電壓的車輛用13極連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage |
| ISO 11451-1 | 道路車輛.窄帶輻射的電磁能量產生的電子干擾的車輛試驗方法.第1部分:一般原則和術語 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology |
| ISO 11451-2 | 道路車輛.窄帶輻射的電磁能量產生的電干擾的車輛試驗方法.第2部分:車外輻射源 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation sources |
| ISO 11451-3 | 道路車輛 窄帶輻射的電磁能量產生的電干擾 車輛試驗方法 第3部分:車載發射器模擬 | Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 3: On-board transmitter simulation |
| ISO 11451-3 | 道路車輛.窄帶輻射電磁能量的電干擾車輛試驗方法.第3部分:車載發射機模擬 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation |
| ISO 11451-4 | 道路車輛.窄帶輻射的電磁能量的電磁干擾車輛試驗方法.第4部分:大電流量注入(BCI)法 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) |
| ISO 11452-1 | 道路車輛.窄帶輻射的電磁能量產生的電干擾的部件試驗方法.第1部分:總則和術語 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology |
| ISO 11452-2 | 道路車輛.窄帶輻射的電磁能量產生的電干擾的部件試驗方法.第2部分:吸波屏蔽外殼 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure |
| ISO 11452-3 | 道路車輛 窄帶輻射的電磁能量產生的電干擾 部件試驗方法 第3部分:橫向電磁模式(TEM)元件 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromgnetic energy - Part 3: Transverse electromagnetic (TEM) cell |
| ISO 11452-4 | 道路車輛.窄帶輻射電磁能量產生的電子干擾用部件試驗方法.第4部分:大容量電流注入(BCI) | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) |
| ISO 11452-5 | 道路車輛.用窄帶發射的電磁能量進行電干擾的元件試驗方法.第5部分:微波帶狀線 | Road vehicles - Component test methods for electrical disturbances by narrowband radiated electromagnetic energy - Part 5: Stripline |
| ISO 11452-7 | 道路車輛.窄帶輻射的電磁能量產生的電干擾的部件試驗方法.第7部分:直流射頻(RF)能注入 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection |
| ISO 11452-8 | 道路車輛.窄帶輻射電磁能量的電干擾元部件試驗方法.第8部分:磁場抗擾性 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields |
| ISO 11460 | 兩輪摩托車.照明和光信號裝置的定位 | Two-wheeled motorcycles - Positioning of lighting and light-signalling devices |
| ISO 11486 | 摩托車.底盤功率計測定滑行阻力的方法 | Motorcycles - Methods for setting running resistance on a chassis dynamometer |
| ISO 11519-1 | 道路車輛 低速串行數據通信 第1部分:總則和定義 | Road vehicles - Low-speed serial data communication - Part 1: General and definitions |
| ISO 11519-3 AMD 1 | 道路車輛 低速串行數據通信 第3部分:車輛局域網絡(VAN) 修改1 | Road vehicles - Low-speed serial data communication - Part 3: Vehicle area network (VAN); Amendment 1 |
| ISO 11519-3 | 道路車輛 低速串行數據通信 第3部分:車輛局域網絡(VAN) | Road vehicles - Low-speed serial data communication - Part 3: Vehicle area network (VAN) |
| ISO 11530 | 道路車輛 液壓千斤頂 規范 | Road vehicles; hydraulic jacks; specifications |
| ISO 11555-1 | 道路車輛.旅居掛車和輕型掛車用穩定裝置.第1部分:整體式穩定桿 | Road vehicles - Stabilizing devices for caravans and light trailers - Part 1: Integrated stabilizers |
| ISO 11565 Technical Corrigendum 1 | 道路車輛.火花塞.試驗方法和要求.技術勘誤1 | Road vehicles - Spark-plugs - Test methods and requirements; Technical Corrigendum 1 |
| ISO 11565 | 道路車輛.火花塞.試驗方法和要求 | Road vehicles - Spark-plugs - Test methods and requirements |
| ISO 11601 | 推車式滅火器 性能和結構 | Wheeled fire extinguishers - Performance and construction |
| ISO 11602-1 | 消防 手提式和推車式滅火器 第1部分:選擇和安裝 | Fire protection - Portable and wheeled fire extinguishers - Part 1: Selection and installation |
| ISO 11602-2 | 消防 手提式和推車式滅火器 第2部分:檢查和維修 | Fire protection - Portable and wheeled fire extinguishers - Part 2: Inspection and maintenance |
| ISO 11630 | 起重機 車輪位置的測量 | Cranes - Measurement of wheel alignment |
| ISO 11748-1 | 道路車輛 電氣和電子系統的技術文件編制 第1部分：交換文件的內容 | Road vehicles - Technical documentation of electrical and electronic systems - Part 1: Content of exchanged documents |
| ISO 11748-2 | 道路車輛 電氣和電子系統的技術文件編制 第2部分：文件編制協議 | Road vehicles - Technical documentation of electrical and electronic systems - Part 2: Documentation agreement |
| ISO 11748-3 | 道路車輛.電氣和電子系統的技術文件.第3部分:應用實例 | Road vehicles - Technical documentation of electrical and electronic systems - Part 3: Application example |
| ISO 11749 | 帶傳動 汽車工業用多楔帶 疲勞試驗 | Belt drive - V-ribbed belts for the automotive industry - Fatigue test |
| ISO 1176 | 道路車輛 質量 詞匯和代碼 兩種語言版 | Road vehicles; masses; vocabulary and codes |
| ISO 11783-13 | 農業和林業用牽引車和機械.串行控制和通信數據網.第13部分:文件服務器 | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 13: File server |
| ISO 11838 | 摩托車和摩托車駕駛員運動學 詞匯 | Motorcycle and motorcycle-rider kinematics - Vocabulary |
| ISO 11841-1 | 道路車輛和內燃發動機 濾清器詞匯 第1部分:濾清器和濾清器部件定義 兩種語言版 | Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components |
| ISO 11841-2 | 道路車輛和內燃發動機 濾清器詞匯 第2部分:濾清器及其部件特性的定義 兩種語言版 | Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components |
| ISO 1185 | 道路車輛.牽引車和掛車之間電氣連接用連接器.帶24V標稱電源電壓的車輛用24N(標準)型7極連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage |
| ISO 11898-1 Technical Corrigendum 1 | 道路車輛.控制器局域網絡.第1部分:數據鏈層和物理信令.技術勘誤1 | Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling; Technical Corrigendum 1 |
| ISO 11898-1 | 道路車輛.控制器局域網絡.第1部分:數據鏈層和物理信令 | Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signalling |
| ISO 11898-2 | 道路車輛.控制器局域網絡.第2部分:高速媒體存取單元 | Road vehicles - Controller area network (CAN) - Part 2: High-speed medium access unit |
| ISO 11898-3 Technical Corrigendum 1 | 道路車輛.控制器局域網絡(CAN).第3部分:低速、耐故障、依賴媒介的界面.技術勘誤1 | Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface; Technical Corrigendum 1 |
| ISO 11898-3 | 道路車輛.控制器局域網絡(CAN).第3部分:低速、耐故障、依賴媒介的界面 | Road vehicles - Controller area network (CAN) - Part 3: Low-speed, fault-tolerant, medium-dependent interface |
| ISO 11898-4 | 道路車輛.控制器局域網絡.第4部分:時間觸發通信 | Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication |
| ISO 11898-5 | 道路車輛.控制器區域網絡(CAN).第5部分:低功率模式的高速媒體訪問單元 | Road vehicles - Controller area network (CAN) - Part 5: High-speed medium access unit with low-power mode |
| ISO 11992-1 | 道路車輛.牽引車和拖掛車之間電氣連接數字信息的交換.第1部分:物理層和數據鏈層 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1: Physical and data-link layer |
| ISO 11992-2 AMD 1 | 道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第2部分:制動器和傳動裝置用應用層.修改件1 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear; Amendment 1 |
| ISO 11992-2 | 道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第2部分:制動和傳動裝置用應用層 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear |
| ISO 11992-3 | 道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第3部分:不包括制動和傳動裝置的設備用應用層 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3: Application layer for equipment other than brakes and running gear |
| ISO 11992-4 Technical Corrigendum 1 | 道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第4部分:診斷.技術勘誤1 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics; Technical Corrigendum 1 |
| ISO 11992-4 | 道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第4部分:診斷 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics |
| ISO 12021-1 | 道路車輛 對側向風的敏感度 第1部分:利用生風輸入進行的開環試驗方法 | Road vehicles - Sensitivity to lateral wind - Part 1: Open-loop test method using wind generator input |
| ISO 12046 | 同步帶傳動 汽車用帶 物理性能測定 | Synchronous belt drives - Automotive belts - Determination of physical properties |
| ISO 12097-1 | 道路車輛.安全氣球零部件.第1部分:詞匯 | Road vehicles - Airbag components - Part 1: Vocabulary |
| ISO 12097-2 | 道路車輛 氣囊組件 第2部分:氣囊組件的試驗 | Road vehicles - Airbag components - Part 2: Testing of airbag modules |
| ISO 12097-3 | 道路車輛.空氣囊零部件.第3部分:充氣機組合件的檢驗 | Road vehicles - Airbag components - Part 3: Testing of inflator assembly |
| ISO 12098 | 公路車輛.牽引車和掛車之間電氣連接用連接器.具有24V標稱電源電壓的車輛用15極連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage |
| ISO 12103-1 | 道路車輛 用于濾清器評價的粉塵試驗 第1部分:亞利桑那州試驗粉塵 | Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust |
| ISO 12103-2 | 道路車輛 用于濾清器評價的粉塵試驗 第2部分:氧化鋁試驗粉塵 | Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust |
| ISO 12140 | 農業機械 農用掛車和被牽引設備牽引桿千斤頂 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| ISO 12161 | 道路車輛.電動機車和拖車耐摩擦制動系統.試驗方法 | Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures |
| ISO 12166 | 電阻焊設備 汽車工業中多點焊接用帶一個副線圈的變壓器的特殊規范 | Resistance welding equipment - Particular specifications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry |
| ISO 12214 | 道路車輛.汽車手控裝置的轉向指示器 | Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
| ISO 12215-4 | 小艇.船體結構和尺寸.第4部分:車間和制造 | Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing |
| ISO 12353-1 | 道路車輛.交通事故分析.第1部分:詞匯 | Road vehicles - Traffic accident analysis - Part 1: Vocabulary |
| ISO 12353-2 | 道路車輛.交通事故分析.沖擊嚴酷度測量法的使用指南 | Road vehicles - Traffic accident analysis - Part 2: Guidelines for the use of impact severity measures |
| ISO 12357 Technical Corrigendum 1 | 商用道路車輛.剛性牽引桿用牽引聯結器和牽引桿掛鉤孔.強度試驗.技術勘誤1 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests; Technical Corrigendum 1 |
| ISO 12357-1 | 商用道路車輛.剛性牽引桿用牽引裝置和牽引桿掛鉤孔.第1部分:一般貨運中心軸掛車的強度試驗 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Part 1: Strength tests for general cargo centre-axle trailers |
| ISO 12357 | 商用道路車輛 剛性牽引桿用牽引裝置和牽引桿掛鉤孔 強度試驗 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests |
| ISO 12357-2 | 商用道路車輛.剛性牽引桿用牽引聯結器和牽引桿掛鉤孔.第2部分:專用強度試驗 | Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Part 2: Strength tests for special applications |
| ISO 12364 | 兩輪摩托車 防抱死系統（ABS） 試驗和測量方法 | Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12366 | 兩輪輕便摩托車 防抱死系統（ABS） 試驗和測量方法 | Two-wheeled mopeds - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12368 | 農業車輛 拖掛車輛的機械鉤掛式連接裝置 試驗方法和要求 | Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements |
| ISO 12667 | 商用車輛和公共汽車 十字齒轉動軸法蘭、T型 | Commercial vehicles and buses; cross-tooth propeller shaft flanges, type T |
| ISO 13041-1 | 數控立式車床和轉向中心的試驗條件.第1部分:有水平工件夾緊軸的機床的幾何試驗 | Test conditions for numerically controlled turning machines and turning centres - Part 1: Geometric tests for machines with a horizontal workholding spindle |
| ISO 13041-4 | 數控立式車床和轉向中心的試驗條件.第4部分:線性和旋轉軸定位的精確度和可重復性 | Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes |
| ISO 13041-5 | 數控車床和車削中心的試驗條件.第5部分:進給量、速率排檔和內插的精確度 | Test conditions for numerically controlled turning machines and turning centres - Part 5: Accuracy of feeds, speeds and interpolations |
| ISO 13041-6 | 數控立式車床和轉向中心的試驗條件.第6部分:試驗樣本成品的精確度 | Test conditions for numerically controlled turning machines and turning centres - Part 6: Accuracy of a finished test piece |
| ISO 13041-7 | 數控立式車床和轉向中心的試驗條件.第7部分:坐標平面上等高線特性評價 | Test conditions for numerically controlled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes |
| ISO 13041-8 | 數控立式車床和轉向中心的試驗條件.第8部分:熱變形的評價 | Test conditions for numerically controlled turning machines and turning centres - Part 8: Evaluation of thermal distortions |
| ISO 13215-1 | 道路車輛.降低兒童約束系統的誤用風險.第1部分:現場學習形式 | Road vehicles - Reduction of misuse risk of child restraint systems - Part 1: Forms for field studies |
| ISO 13215-2 | 道路車輛 減少兒童約束系統的誤用風險 第2部分:正確裝配的要求和試驗規程(薄板法) | Road vehicles - Reduction of misuse risk of child restraint systems - Part 2: Requirements and test procedures for correct installation (panel method) |
| ISO 13215-3 | 道路車輛 減少兒童約束系統的誤用風險 第3部分:使用誤用模式和效果分析(MMEA)對誤用的預測和評估 | Road vehicles - Reduction of misuse risk of child restraint systems - Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) |
| ISO 13216-1 AMD 1 | 道路車輛.兒童約束系統在車內的固定點及主固定點的安裝.第1部分:座椅座面與靠背之間的固定點及其連接.修改 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments - Amendment 1: CRF reduced height specification |
| ISO 13216-1 AMD 3 | 道路車輛.兒童限制器系統用車輛錨具和錨具附件.座位彎曲錨具及附件.修改件3.使用ISOFIX CRS的檢測規范 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments; Amendment 3: Specifications for the detection of use of ISOFIX CRS |
| ISO 13216-1 | 道路車輛 兒童約束系統在車內的固定點及主固定點的安裝 第1部分:座椅座面與靠背之間的固定點及其連接 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments |
| ISO 13216-2 | 道路車輛.兒童約束系統在車內的固定點及主固定點的安裝.第2部分:頂部系留的固定點及其連接 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 2: Top tether anchorages and attachments |
| ISO 13216-3 | 道路車輛.兒童約束系統在車內用固定件及固定件安裝.第3部分:兒童固定范圍和車內空間分類 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 3: Classification of child restraint dimensions and space in vehicle |
| ISO 13218 | 道路車輛 兒童約束系統 涉及兒童乘客的事故報告格式 | Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
| ISO 13232-1 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第1部分:定義、符號和一般考慮 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations |
| ISO 13232-2 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第2部分:與事故數據有關的碰撞條件的定義 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data |
| ISO 13232-3 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第3部分:摩托車手仿真碰撞假人 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Motorcyclist anthropometric impact dummy |
| ISO 13232-4 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第4部分:被測量的變量、儀器儀表和測量規 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures |
| ISO 13232-5 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第5部分:傷害值和風險/利益分析 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis |
| ISO 13232-6 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第6部分:實車碰撞試驗規程 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures |
| ISO 13232-7 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第7部分:摩托車碰撞試驗的計算機模擬的標 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests |
| ISO 13232-8 | 摩托車.用于摩托車駕駛員碰撞保護設備的研究性評估試驗和分析程序.第8部分:文件和報告 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports |
| ISO 13284 | 叉車.叉形臂擴展部分和能自由伸縮的叉形臂.技術特性和強度要求 | Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements |
| ISO 13328 | 摩托車輪胎 輪胎滾動圓周長的測量方法 負載下的新輪胎 | Motorcycle tyres - Measurement of tyre rolling circumference - Loaded new tyres |
| ISO 13331 | 道路車輛 摩托車燃料箱的開口和注油管 蒸發回收系統 | Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system |
| ISO 13333 | 土方機械 自卸車車身支承裝置和司機室翻轉支承裝置 | Earth-moving machinery - Dumper body support and operator's cab tilt support devices |
| ISO 13459 | 土方機械 自卸車 教練員座椅/工作空間 | Earth-moving machinery - Dumpers - Trainer seat/enclosure |
| ISO 13476 Technical Corrigendum 1 | 道路車輛 點火線圈 電氣特性和試驗方法 技術勘誤1 | Road vehicles - Ignition coils - Electrical characteristics and test methods; Technical Corrigendum 1 |
| ISO 13476 | 道路車輛 點火線圈 電氣特性和試驗方法 | Road vehicles - Ignition coils - Electrical characteristics and test methods |
| ISO 13486-1 | 道路車輛 液壓制動系統 第1部分:雙喇叭口管、螺紋孔、陽螺紋管接頭和管座 | Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats |
| ISO 13556 | 道路車輛 排氣系統泄漏位置的確定和裝置的技術規范 | Road vehicles - Localization of exhaust system leaks and equipment specifications |
| ISO 13562-1 | 伸縮臂式工業車輛 第1部分:穩定性試驗 | Industrial variable-reach trucks - Part 1: Stability tests |
| ISO 13562-2 | 伸縮臂式工業車輛 第2部分:6m及以上長度貨運集裝箱叉車附加穩定性試驗 | Industrial variable-reach trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 13563-1 | 單邊負載叉車 第1部分：穩定性試驗 | Single side loading fork-lift trucks - Part 1: Stability tests |
| ISO 13563-2 | 單邊負載叉車 第2部分：搬運6m及以上長度集裝箱的叉車的附加穩定性試驗 | Single side loading fork-lift trucks - Part 2: Additional stability tests for trucks handling freight containers of 6 m length and above |
| ISO 13674-1 | 道路車輛.沿中心駕駛的鑒定試驗.第1部分:搖擺試驗 | Road vehicles - Test method for the quantification of on-centre handling - Part 1: Weave test |
| ISO 13674-2 | 道路車輛.沿中心駕駛的鑒定試驗方法.第2部分:轉向試驗 | Road vehicles - Test method for the quantification of on-centre handling - Part 2: Transition test |
| ISO 13775-1 | 汽車用熱塑管和軟管 第1部分:非燃料上應用 | Thermoplastic tubing and hoses for automotive use - Part 1: Non-fuel applications |
| ISO 13775-2 | 汽車用熱塑管和軟管 第2部分:石油類燃料上應用 | Thermoplastic tubing and hoses for automotive use - Part 2: Petroleum-based-fuel applications |
| ISO 13984 | 液壓 道路車輛燃油系統界面 | Liquid hydrogen - Land vehicle fuelling system interface |
| ISO 13985 | 液態氫.地面車輛燃油箱 | Liquid hydrogen - Land vehicle fuel tanks |
| ISO 14229-1 | 道路車輛.統一診斷設備(UDS).第1部分:規范和要求 | Road vehicles - Unified diagnostic services (UDS) - Part 1: Specification and requirements |
| ISO 14229 | 道路車輛.統一診斷設備(UDS).要求和規范 | Road vehicles - Unified diagnostic services (UDS) - Specification and requirements |
| ISO 14230-1 | 道路車輛 診斷系統 關鍵詞協議2000 第1部分:物理層 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 1: Physical layer |
| ISO 14230-2 | 道路車輛 診斷系統 關鍵詞協議2000 第2部分:數據鏈路層 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 2: Data link layer |
| ISO 14230-3 | 道路車輛 診斷系統 關鍵詞協議2000 第3部分:應用層 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 3: Application layer |
| ISO 14230-4 | 道路車輛 診斷系統 關鍵詞協議2000 第4部分:對與排放有關系統的要求 | Road vehicles - Diagnostic systems; Keyword protocol 2000 - Part 4: Requirements for emission-related systems |
| ISO 14400 | 道路車輛.輪子和輪輞.使用、一般維護、安全要求和失效條件 | Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions |
| ISO 14460 AMD 1 | 賽車手用防護服.熱防護和火焰防護.性能要求和試驗方法.修改件1: 改進的彎曲試驗 | Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods; Amendment 1: Modified flexion test |
| ISO 14460 | 賽車駕駛員的防護服 對熱和火焰的防護 性能要求和試驗方法 | Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods |
| ISO 14469-1 | 道路車輛.壓縮天然氣(CNG)加添油連接器.第1部分:20 MPa (200 bar)連接器 | Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 1: 20 MPa (200 bar) connector |
| ISO 14469-3 | 道路車輛.壓縮天然氣(CNG)填充連接器.第3部分:25 MPa (250 bar)連接器 | Road vehicles - Compressed natural gas (CNG) refuelling connector - Part 3: 25 MPa (250 bar) connector |
| ISO 14505-2 Technical Corrigendum 1 | 熱環境的人類工效學.車內熱環境評定.第2部分:等效溫度測定.技術勘誤1 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature; echnical Corrigendum 1 |
| ISO 14505-2 | 熱環境的人類工效學.車內熱環境的評估.第2部分:等效溫度的測定 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature |
| ISO 14505-3 | 熱環境的人類工效學.車輛的熱環境評估.第3部分:人用熱舒適評估 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 3: Evaluation of thermal comfort using human subjects |
| ISO 14508 | 道路車輛.火花塞.接線端子 | Road vehicles - Spark-plugs - Terminals |
| ISO 14512 | 乘用車 在具有兩個不同摩擦系數的路面上進行的正前方制動 開環試驗方法 | Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| ISO 14513 Technical Corrigendum 1 | 道路車輛.行人保護.頭的撞擊試驗方法.技術勘誤1 | Road vehicles - Pedestrian protection - Head impact test method; Technical Corrigendum 1 |
| ISO 14513 | 道路車輛.行人防護.頭部沖擊試驗方法 | Road vehicles - Pedestrian protection - Head impact test method |
| ISO 14572 | 道路車輛.圓形屏蔽和非屏蔽60V和600V多芯鎧裝電纜.基本和高性能電纜的試驗方法和要求 | Road vehicles - Round, screened and unscreened 60 V and 600 V multi-core sheathed cables - Test methods and requirements for basic and high-performance cables |
| ISO 14649-12 | 工業自動化系統和集成.機械裝置控制.計算機數控器用數據模型.第12部分:車削用過程數據 | Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 12: Process data for turning |
| ISO 14649-121 | 工業自動化系統和集成.機械裝置控制.計算機數控器用數據模型.第121部分:車床用工具 | Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 121: Tools for turning machines |
| ISO 14722 | 輕便摩托車及其駕駛員運動學 詞匯 | Moped and moped-rider kinematics - Vocabulary |
| ISO 14791 | 道路車輛 重型商用列車和鉸接式大客車 橫向穩定性試驗方法 | Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods |
| ISO 14792 | 道路車輛.重型商用車輛和公共汽車.穩態循環試驗 | Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests |
| ISO 14793 | 道路車輛.重型商用車輛和汽車.橫向瞬態響應試驗方法 | Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods |
| ISO 14794 | 重型商用車輛和客車.轉向制動.開環試驗方法 | Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods |
| ISO 14814 | 道路運輸和交通遠程信息處理.自動車輛和設備識別.參考體系結構和術語 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology |
| ISO 14815 | 道路運輸和交通遠程信息處理.自動車輛和設備識別.系統規范 | Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications |
| ISO 14816 | 道路運輸和運輸量遠程信息處理.自動車輛和設備的識別.編號和數據結構 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure |
| ISO 14829 | 貨運集裝箱.貨運集裝箱搬運用跨運車.穩定性的計算 | Freight containers - Straddle carriers for freight container handling - Calculation of stability |
| ISO 15005 | 道路車輛.運輸信息和控制系統的人類工效學特性.對話管理原則和一致性程序 | Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures |
| ISO 15006 | 道路車輛.交通信息和控制設備的人類工效學方面.車輛中聲音信號表示規范和性能規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation |
| ISO 15007-1 | 道路車輛.與運輸信息和控制系統有關的司機目視行為的測定.第1部分: 定義和參數 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters |
| ISO 15008 | 道路車輛.傳輸信息和控制系統的人類工效學方面.車內目視顯示規范和一致性規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation |
| ISO 15031-1 | 道路車輛 車輛與發射相關診斷的外部設備之間的通信 第1部分：一般信息 | Road vehicles - Communication between vehicle and external equipment for emmissions-related diagnostics - Part 1: General information |
| ISO 15031-3 | 道路車輛.排放相關的診斷用車輛和外部設備之間的通信.第3部分:診斷連接器和相關電路的規范及使用 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits, specification and use |
| ISO 15031-4 | 道路車輛.排放相關的診斷用車輛和外部設備之間的通信.第4部分:外部試驗設備 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment |
| ISO 15031-5 | 道路車輛.排放相關診斷用車輛和外部設備之間的通信.第5部分:排放相關的診斷服務 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services |
| ISO 15031-6 | 道路車輛.車輛與發射相關診斷用外部設備間的通信.第6部分:故障診斷編碼定義 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions |
| ISO 15031-7 | 道路車輛 車輛與發射相關診斷用外部設備間的通信 第7部分：數據鏈路的安全 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security |
| ISO 15037-1 Technical Corrigednum 1 | 道路車輛 車輛動力學試驗方法 第1部分:客車的一般條件 技術勘誤1 | Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars - Technical Corrigendum 1 |
| ISO 15037-1 | 道路車輛.車輛動態試驗方法.第1部分:乘用車一般條件 | Road vehicles - Vehicle dynamics test methods - Part 1: General conditions for passenger cars |
| ISO 15037-2 | 道路車輛.車輛動力學試驗方法.第2部分:重型車輛和公共汽車的一般條件 | Road vehicles - Vehicle dynamics test methods - Part 2: General conditions for heavy vehicles and buses |
| ISO 15075 | 運輸信息和控制系統.車載導航系統.通信信息集要求 | Transport information and control systems - In-vehicle navigation systems - Communications message set requirements |
| ISO 15082 | 道路車輛 剛性塑料安全玻璃材料的試驗 | Road vehicles - Tests for rigid plastic safety glazing materials |
| ISO 15170-1 | 道路車輛 帶有插銷和螺旋鎖的4柱電連接器 第1部分：尺寸和應用等級 | Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 1: Dimensions and classes of applications |
| ISO 15170-2 | 道路車輛 帶有插銷和螺旋鎖的4柱電連接器 第2部分：試驗和要求 | Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements |
| ISO 15172 | 道路車輛.輪子.螺母支承面強度試驗 | Road vehicles - Wheels - Nut seat strength tests |
| ISO 15202-1 | 車間空氣 等離子體原子發射光譜法對顆粒物中金屬及非金屬的測定 第1部分:采樣 | Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling |
| ISO 15202-3 | 車間空氣.感應耦合等離子體原子發射光譜法對氣載顆粒物中金屬及類金屬的測定.第3部分:分析 | Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis |
| ISO 15403-1 | 天然氣.汽車用壓縮性燃料天然氣.第1部分:質量標記 | Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality |
| ISO 15500-1 AMD 1 | 道路車輛.壓縮天然氣(CNG)燃料系統元部件.第1部分:一般要求和定義.修改1 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions; Amendment A1 |
| ISO 15500-1 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第1部分:一般要求和定義 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 1: General requirements and definitions |
| ISO 15500-10 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第10部分:氣流調節器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster |
| ISO 15500-11 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第11部分:天然氣/空氣混合器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 11: Gas/air mixer |
| ISO 15500-12 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第12部分:減壓閥 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV) |
| ISO 15500-13 | 道路車輛 壓縮天然氣（CNG）燃料系統部件 第13部分：減壓器（PRD） | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD) |
| ISO 15500-14 | 道路車輛.壓縮天然氣(CNG)燃料系統部件.第14部分:溢流閥 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 14: Excess flow valve |
| ISO 15500-15 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第15部分:防氣罩和通風軟管 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 15: Gas-tight housing and ventilation hose |
| ISO 15500-16 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第16部分:硬質燃料管線 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 16: Rigid fuel line |
| ISO 15500-17 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第17部分:柔性燃料管線 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 17: Flexible fuel line |
| ISO 15500-18 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第18部分:濾清器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 18: Filter |
| ISO 15500-19 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第19部分:配件 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 19: Fittings |
| ISO 15500-2 | 道路車輛 壓縮天然氣（CNG）燃料系統部件 第2部分：性能和一般試驗方法 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 2: Performance and general test methods |
| ISO 15500-20 | 道路車輛.壓縮天然氣(CNG)燃料系統部件.第20部分:非不銹鋼制的硬質燃料管線 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 20: Rigid fuel line in material other than stainless steel |
| ISO 15500-3 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第3部分:防逆閥 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve |
| ISO 15500-4 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第4部分:控閥 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve |
| ISO 15500-5 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第5部分:手控氣缸閥 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve |
| ISO 15500-6 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第6部分:自動閥 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 6: Automatic valve |
| ISO 15500-7 | 道路車輛.壓縮天然氣(CNG)燃料系統元部件.第7部分:氣體噴射器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 7: Gas injector |
| ISO 15500-8 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第6部分:壓力指示器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 8: Pressure indicator |
| ISO 15500-9 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第9部分:調壓器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator |
| ISO 15501-1 | 道路車輛 壓縮天然氣燃料系統 第1部分：安全要求 | Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements |
| ISO 15501-2 | 道路車輛、壓縮天然氣(CNG)燃料系統.第2部分:試驗方法 | Road vehicles - Compressed natural gas (CNG) fuel systems - Part 2: Test methods |
| ISO 15622 | 運輸信息和控制系統.自適配式車速控制系統.性能要求和試驗程序 | Transport information and control systems - Adaptive Cruise Control systems - Performance requirements and test procedures |
| ISO 15623 | 運輸信息和控制系統.前方車輛碰撞警告系統.性能要求和試驗程序 | Transport information and control systems - Forward vehicle collision warning systems - Performance requirements and test procedures |
| ISO 15763 | 道路車輛.容許的最大總質量大于3.5噸公共汽車和營運車輛的報警系統 | Road vehicles - Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
| ISO 15764 | 道路車輛.擴展數據鏈接安全 | Road vehicles - Extended data link security |
| ISO 15765-1 | 道路車輛.控制器區域網絡(CAN)診斷.第1部分:一般信息 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 1: General information |
| ISO 15765-2 | 道路車輛.控制器區域網絡(CAN)的診斷.第2部分:網絡層服務 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 2: Network layer services |
| ISO 15765-3 | 道路車輛.控制器區域網絡(CAN)的診斷.第3部分:統一標準診斷服務的實施 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 3: Implementation of unified diagnostic services (UDS on CAN) |
| ISO 15765-4 | 道路車輛.控制器區域網絡(CAN)診斷.第4部分:相關發射系統的要求 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 4: Requirements for emissions-related systems |
| ISO 15794 | 雙向和多向升降叉車 穩定性試驗 | Bi-directional and multi-directional fork-lift trucks - Stability tests |
| ISO 15828 | 道路車輛.斜撞試驗規程 | Road vehicles - Offset frontal impact test procedure |
| ISO 15829 | 道路車輛.利用桿沖擊模擬評價有側面氣囊時乘客間相互作用的側面沖擊試驗過程 | Road vehicles - Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation |
| ISO 15830-1 | 道路車輛.WorldSID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.第1部分:術語和基本原理 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 1: Terminology and rationale |
| ISO 15830-2 | 道路車輛.WorldSID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.第3部分:機械子系統 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 2: Mechanical subsystems |
| ISO 15830-3 | 道路車輛.WorldSID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.第3部分:電子子系統 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 3: Electronic subsystems |
| ISO 15830-4 | 道路車輛.WorldSID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.第4部分:用戶手冊 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side impact dummy - Part 4: User's manual |
| ISO 1585 | 道路車輛 發動機試驗規程 凈功率 | Road vehicles; engine test code; net power |
| ISO 15870 | 機動工業車輛 安全標志和危險圖示 一般原則 | Powered industrial trucks - Safety signs and hazard pictorials - General principles |
| ISO 15871 | 工業車輛 集裝箱搬運和抓斗臂操作用指示燈規范 | Industrial trucks - Specification for indicator lights for container handling and grappler arm operations |
| ISO 16121-1 | 道路車輛.專線公共汽車駕駛員工作地點的人類功效學要求.第1部分:一般描述和基本要求 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 1: General description, basic requirements |
| ISO 16121-2 | 道路車輛.專線公共汽車駕駛員工地點的人類功效學要求.第2部分:能見度 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 2: Visibility |
| ISO 16121-3 | 道路車輛.專線公共汽車駕駛員工作地點的人類功效學要求.第3部分:信息設備和控制裝置 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 3: Information devices and controls |
| ISO 16121-4 | 道路車輛.專線公共汽車駕駛員工作地點的人類功效學要求.第4部分:駕駛室環境 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Part 4: Cabin environment |
| ISO 16183 | 重型機車.未處理排氣的氣體排放測量和瞬變試驗條件下用部分流體稀釋系統測量粒子排放 | Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| ISO 16185 | 道路車輛 由尾氣排放確定重型車輛的發動機系列 | Road vehicles - Engine families for certification of heavy-duty vehicles - Exhaust emissions |
| ISO 16200-2 | 車間空氣質量 采用溶劑解析/氣相色譜法對揮發性有機物進行采樣和分析 第2部分:擴散采樣法 | Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 2: Diffusive sampling method |
| ISO 16232-1 | 道路車輛.液壓管路部件清潔度.第1部分:詞匯 | Road vehicles - Cleanliness of components of fluid circuits - Part 1: Vocabulary |
| ISO 16232-10 | 道路車輛.液壓管路部件清潔度.第10部分:結果表達 | Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results |
| ISO 16232-2 | 道路車輛.液壓管路部件清潔度.第2部分:攪拌萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 2: Method of extraction of contaminants by agitation |
| ISO 16232-3 | 道路車輛.液壓管路部件清潔度.第3部分:壓力漂洗萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 3: Method of extraction of contaminants by pressure rinsing |
| ISO 16232-4 | 道路車輛.液壓管路部件清潔度.第4部分:超聲技術萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques |
| ISO 16232-5 | 道路車輛.液壓管路部件清潔度.第5部分:在功能試驗臺上萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Part 5: Method of extraction of contaminants on functional test bench |
| ISO 16232-6 | 道路車輛.液壓管路部件清潔度.第6部分:重量分析法測量顆粒質量 | Road vehicles - Cleanliness of components of fluid circuits - Part 6: Particle mass determination by gravimetric analysis |
| ISO 16232-7 | 道路車輛.液壓管路部件清潔度.第7部分:顯微分析測量粒徑和計數 | Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis |
| ISO 16232-8 | 道路車輛.液壓管路部件清潔度.第8部分:顯微分析測定顆粒性質 | Road vehicles - Cleanliness of components of fluid circuits - Part 8: Particle nature determination by microscopic analysis |
| ISO 16232-9 | 道路車輛.液壓管路部件清潔度.第9部分:用自動消光顆粒計數器測量粒徑和計數 | Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter |
| ISO 16234 | 重型商用車輛和客車.具有裂口摩擦系數的正向前方地面制動系統.開環試驗方法 | Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| ISO 16246 | 道路車輛.帶平座和14 mm六角的M12 x 1.25火花塞及其氣缸蓋 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| ISO 16247 | 道路車輛.排氣系統泄漏的檢測.氦試驗方法和探測裝置規范 | Road vehicles - Detection of exhaust system leaks - Helium test method and detection device specification |
| ISO 16333 | 大型商用車輛和客車.穩態傾翻閾.傾斜臺試驗方法 | Heavy commercial vehicles and buses - Steady-state rollover threshold - Tilt-table test method |
| ISO 16673 | 道路車輛.運輸信息和控制系統的人類工效學方面.阻塞法評定使用車內系統產生的視覺需求 | Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems |
| ISO 16750-1 | 道路車輛.電氣和電子設備的環境條件和試驗.第1部分:總則 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General |
| ISO 16750-2 | 道路車輛.電氣和電子設備的環境條件和試驗.第2部分:電力負載 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads |
| ISO 16750-3 | 道路車輛.電氣和電子設備的環境條件和測試.第3部分:機械載荷 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads |
| ISO 16750-4 | 道路車輛.電氣和電子設備的環境條件和試驗.第4部分:氣候荷載 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads |
| ISO 16750-5 | 道路車輛.電氣和電子設備的環境條件和試驗.第5部分:化學荷載 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads |
| ISO 16833 | 道路車輛.輪子.徑向和橫向跳動的測量 | Road vehicles - Wheels - Measurement of radial and lateral run-out |
| ISO 16844-1 Technical Corrigendum 1 | 道路車輛.速度記錄器系統.第1部分:電連接器.技術勘誤1 | Road vehicles - Tachograph systems - Part 1: Electrical connectors; Technical Corrigendum 1 |
| ISO 16844-1 | 道路車輛 速度記錄器系統 第1部分：電連接器 | Road vehicles - Tachograph systems - Part 1: Electrical connectors |
| ISO 16844-2 | 道路車輛.轉速表系統.第2部分:記錄設備電子接口 | Road vehicles - Tachograph systems - Part 2: Recording unit, electrical interface |
| ISO 16844-3 Technical Corrigendum 1 | 道路車輛.速度記錄器系統.第3部分:動作傳感器接口 | Road vehicles - Tachograph systems - Part 3: Motion sensor interface |
| ISO 16844-3 | 道路車輛.速度記錄器系統.第3部分:動作傳感器接口 | Road vehicles - Tachograph systems - Part 3: Motion sensor interface |
| ISO 16844-4 | 道路車輛.速度記錄器系統.第4部分:CAN接口 | Road vehicles - Tachograph systems - Part 4: CAN interface |
| ISO 16844-5 | 道路車輛.速度記錄器系統.第5部分:安全的CAN接口 | Road vehicles - Tachograph systems - Part 5: Secured CAN interface |
| ISO 16844-6 | 道路車輛.速度記錄器系統.第6部分:診斷 | Road vehicles - Tachograph systems - Part 6: Diagnostics |
| ISO 16844-7 | 道路車輛.速度記錄器系統.第7部分:參數 | Road vehicles - Tachograph systems - Part 7: Parameters |
| ISO 16845 | 道路車輛.控制器區域網(CAN).合格試驗計劃 | Road vehicles - Controller area network (CAN) - Conformance test plan |
| ISO 16850 | 道路車輛.行人保護.兒童頭部沖擊試驗方法 | Road vehicles - Pedestrian protection - Child head impact test method |
| ISO 16992 | 乘用車輪胎.備用設備代替設備(SUSE) | Passenger car tyres - Spare unit substitutive equipment (SUSE) |
| ISO 17076 | 皮革.物理和機械試驗.汽車皮革的耐磨性測定 | Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
| ISO 1708 | 臥式車床驗收條件 精度檢驗 | Acceptance conditions for general purpose parallel lathes; testing of the accuracy |
| ISO 1724 | 道路車輛.牽引車和掛車之間電氣連接用連接器.帶12V標稱電源電壓的車輛用12N(標準)型7極連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage |
| ISO 1726 Technical Corrigendum 1 | 道路車輛.拖拉機和半掛車之間的機械連接.互換性.技術勘誤1 | Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability; Technical Corrigendum 1 |
| ISO 1726-2 | 道路車輛.拖拉機和半掛車之間的機械連接.第2部分:低耦合拖拉機和高容量半掛車之間的互換性 | Road vehicles - Mechanical couplings between tractors and semi-trailers - Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers |
| ISO 1726 | 道路車輛.拖拉機和半掛車之間的機械連接.一般貨運用拖拉機和半掛車之間的互換性 | Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability between tractors and semi-trailers for general cargo |
| ISO 17268 | 壓縮氫路面車輛加油連接設備 | Compressed hydrogen surface vehicle refuelling connection devices |
| ISO 17269 | 乘用車輪胎 測量滾動周長的方法 負載下的新輪胎 | Passenger car tyres - Methods for measuring rolling circumference - Loaded new tyres |
| ISO 1728 | 道路車輛.機動車和掛車之間的氣壓制動連接裝置.互換性 | Road vehicles - Pneumatic braking connections between motor vehicles and towed vehicles - Interchangeability |
| ISO 17287 | 道路車輛.運輸信息和控制系統的工效學.駕駛時適用性的評定規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving |
| ISO 17288-1 | 乘用車.自由控制性能.第1部分:轉向釋放開環試驗方法 | Passenger cars - Free-steer behaviour - Part 1: Steering-release open-loop test method |
| ISO 17288-2 | 乘用車.無級變速性能.第2部分:轉向脈沖開環試驗方法 | Passenger cars - Free-steer behaviour - Part 2: Steering-pulse open-loop test method |
| ISO 17356-1 | 道路車輛.嵌入式機動車裝置用開放式界面.第1部分:一般結構、術語、定義和縮寫術語 | Road vehicles - Open interface for embedded automotive applications - Part 1: General structure and terms, definitions and abbreviated terms |
| ISO 17356-2 | 道路車輛.嵌入式機動車裝置用開放式界面.第2部分:連接OS, COM和NM的OSEK/VDX規范 | Road vehicles - Open interface for embedded automotive applications - Part 2: OSEK/VDX specifications for binding OS, COM and NM |
| ISO 17356-3 | 道路車輛.嵌入式機動車裝置用開放式界面.第3部分:OSEK/VDX操作系統(OS) | Road vehicles - Open interface for embedded automotive applications - Part 3: OSEK/VDX Operating System (OS) |
| ISO 17356-4 | 道路車輛.嵌入式機動車裝置用開放式界面.第4部分:OSEK/VDX通訊(COM) | Road vehicles - Open interface for embedded automotive applications - Part 4: OSEK/VDX Communication (COM) |
| ISO 17356-5 | 道路車輛.嵌入式機動車裝置用開放式界面.第5部分:OSEK/VDX網絡管理(NM) | Road vehicles - Open interface for embedded automotive applications - Part 5: OSEK/VDX Network Management (NM) |
| ISO 17356-6 | 道路車輛.嵌入式機動車裝置用開放式界面.第5部分:OSEK/VDX執行語言(OIL) | Road vehicles - Open interface for embedded automotive applications - Part 6: OSEK/VDX Implementation Language (OIL) |
| ISO 17373 | 道路車輛.在低速尾部碰撞情況下帶座椅/頭枕設計的乘客頭部和頸部相互影響評估的滑板碰撞試驗過程 | Road vehicles - Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact |
| ISO 1756 | 工業車輛 托盤尺寸 連接裝置 | Industrial trucks; Dimensions of stillages; Connection gauge |
| ISO 17612 | 農業和林業用牽引車和機械.操縱臺用輔助動力傳輸連接器 | Tractors and machinery for agriculture and forestry - Auxiliary-power-transmission connector for the operator station |
| ISO 17733 | 車間空氣.汞和無機汞化合物的測定.低溫蒸氣原子吸收分光光度測定法或原子熒光分光光度測定法 | Workplace air - Determination of mercury and inorganic mercury compounds - Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| ISO 17900 | 農用掛車.帶平衡裝置的半懸掛式掛車.有效負載,垂直靜止負載及軸載的測定 | Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| ISO 18164 | 乘用車、卡車、公共汽車和摩托車輪胎.滾動阻力測量方法 | Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance |
| ISO 18207 | 道路車輛.3.5噸拖車.控制疲勞試驗后聯軸球焊接牽引支架 | Road vehicles - Trailers up to 3,5 t - Control of welded towing brackets for coupling ball after fatigue testing |
| ISO 19072-1 | 道路車輛.點火裝置、兩通和三通連接接口.第1部分:袋形接口定義 | Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 1: Pocket interface definition |
| ISO 19078 | 儲氣瓶.氣瓶安裝檢測和天然氣作燃料機動車路上儲存用高壓儲氣瓶鑒定 | Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| ISO 1919 Technical Corrigendum 1 | 道路車輛 M14×1.25平座火花塞及氣缸蓋安裝孔 技術勘誤1 | Road vehicles - M14 × 1,25 spark-plugs with flat seating and their cylinder head housings; Technical corrigendum 1 |
| ISO 1919 | 道路車輛 M14×1.25平座火花塞及氣缸蓋安裝孔 | Road vehicules - M14 × 1,25 spark-plugs with flat seating and their cylinder head housings |
| ISO 19472 Technical Corrigendum 1 | 林業機械.絞車.尺寸、性能和安全.技術勘誤1 | Machinery for forestry - Winches - Dimensions, performance and safety; Technical Corrigendum 1 |
| ISO 19472 | 林業用機械.絞車.尺寸、性能和安全 | Machinery for forestry - Winches - Dimensions, performance and safety |
| ISO 19812 | 道路車輛.帶16mm六角形平底座的M10 x 1小型火花塞及其汽缸蓋外罩 | Road vehicles - M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| ISO 19813 | 道路車輛.點火系統.火花塞點火線圈和石墨線圈上高壓點火器的要求和試驗方法 | Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils |
| ISO 20019 Technical Corrigendum 1 | 農用車輛.拖掛車輛的機械連接.連接環的尺寸.技術勘誤 | Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch rings; Technical Corrigendum 1 |
| ISO 20019 | 農業車輛 被牽引車輛的機械聯接裝置 掛接環尺寸 | Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch rings |
| ISO 20176 | 道路車輛.H點機械(HPM II).H點測定的規范程序 | Road vehicles - H-point machine (HPM II) - Specifications and procedure for H-point determination |
| ISO 20566 | 色漆和清漆.用實驗室洗車臺測定涂層系統耐劃痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| ISO 20653 | 道路車輛.防護等級(IP-編碼).電子設備對外來物體、水和通道的防護 | Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access |
| ISO 20683-1 | 飛行器地面設備.帶前起落架的無牽引桿的牽引車輛(TLTV)的設計、試驗和維修.第1部分:干線飛行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Part 1: Main-line aircraft |
| ISO 20683-2 | 航空地面設備.帶前起落架的無牽引桿的牽引車輛(TLTV)的設計、試驗和維護.第2部分:區域性飛行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Part 2: Regional aircraft |
| ISO 20826 | 車載液化石油汽裝置部件.容器 | Automotive LPG components - Containers |
| ISO 20828 | 道路車輛.安全性認證管理 | Road vehicles - Security certificate management |
| ISO 20846 | 石油制品.機動車燃料的硫含量的測定.紫外線熒光法 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method |
| ISO 20847 | 石油制品.機動車燃料的硫含量的測定.能量分散X射線熒光光譜法 | Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry |
| ISO 20884 | 石油制品.機動車燃料的硫含量的測定.波長色散X射線熒光光譜法 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry |
| ISO 20957-10 | 固定的訓練器材.第10部分:帶固定輪或無自由飛輪的訓練自行車、附加特定安全要求和試驗方法 | Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods |
| ISO 20957-6 | 固定式訓練設備.第6部分:腳踏車附加的特殊安全要求和試驗方法 | Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods |
| ISO 21069-1 | 道路車輛.使用輥式制動試驗器的最大容許總質量超過3.5 t的車輛上制動系統的試驗.第1部分:氣壓制動系 | Road vehicles - Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester - Part 1: Pneumatic braking systems |
| ISO 21281 | 自行式乘坐控制工業用貨車的踏板結構和布局.踏板結構和布局的原則 | Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals |
| ISO 21308-2 | 道路車輛.底盤和車身制造商(BEP)之間的產品數據交換.第2部分:尺寸車體交換參數 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 2: Dimensional bodywork exchange parameters |
| ISO 21308-3 | 道路車輛.底盤和車身制造商(BEP)之間的產品數據交換.第3部分:通用質量管理交換參數 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 3: General, mass and administrative exchange parameters |
| ISO 21750 | 道路車輛.有關增進輪胎充氣壓力監控的安全 | Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoring |
| ISO 21848 | 道路車輛.42V電源電壓的電氣和電子設備.電荷載 | Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V - Electrical loads |
| ISO 21994 | 乘用車.防抱死制動系統(ABS)直線制動停車距離.開環試驗方法 | Passenger cars - Stopping distance at straight-line braking with ABS - Open-loop test method |
| ISO 22168 | 道路車輛.影響光源光色的涂層的保持試驗.試驗方法 | Road vehicles - Holding test of coatings influencing the colour of light emitted by light source(s) - Test methods |
| ISO 22628 | 道路車輛.可循環和可恢復性.計算方法 | Road vehicles - Recyclability and recoverability - Calculation method |
| ISO 22896 | 道路車輛.使用者安全系統開發和傳感器總線 | Road vehicles - Deployment and sensor bus for occupant safety systems |
| ISO 22902-1 | 道路車輛.車用多媒體接口.第1部分:通用技術綜述 | Road vehicles - Automotive multimedia interface - Part 1: General technical overview |
| ISO 22902-2 | 道路車輛.車用多媒體接口.第2部分:使用情況 | Road vehicles - Automotive multimedia interface - Part 2: Use cases |
| ISO 22902-3 | 道路車輛.車用多媒體接口.第3部分:系統要求 | Road vehicles - Automotive multimedia interface - Part 3: System requirements |
| ISO 22902-4 | 道路車輛.車用多媒體接口.第4部分:車輛接口準入的網絡協議要求 | Road vehicles - Automotive multimedia interface - Part 4: Network protocol requirements for vehicle interface access |
| ISO 22902-5 | 道路車輛.車用多媒體接口.第5部分:公共電文集 | Road vehicles - Automotive multimedia interface - Part 5: Common message set |
| ISO 22902-6 | 道路車輛.車用多媒體接口.第6部分:車輛接口要求 | Road vehicles - Automotive multimedia interface - Part 6: Vehicle interface requirements |
| ISO 22902-7 | 道路車輛.車用多媒體接口.第7部分:物理規范 | Road vehicles - Automotive multimedia interface - Part 7: Physical specification |
| ISO 22977 | 道路車輛.帶14 mm十二角平座及其氣缸蓋的M12 1,25火花塞 | Road vehicles - M12 × 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| ISO 23273-1 | 燃料電池道路車輛.安全規范.第1部分:車輛功能安全 | Fuel cell road vehicles - Safety specifications - Part 1: Vehicle functional safety |
| ISO 23273-2 | 燃料電池道路車輛.安全規范.第2部分:以壓縮氫為車輛燃料的防止氫爆炸的保護 | Fuel cell road vehicles - Safety specifications - Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| ISO 23273-3 | 燃料電池道路車輛.第3部分:人員電擊防護 | Fuel cell road vehicles - Safety specifications - Part 3: Protection of persons against electric shock |
| ISO 23274 | 混合動力道路車輛.廢氣排放和燃料消耗測量.非外表可充電車輛 | Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles |
| ISO 2328 | 叉車.鉤接式叉形臂和叉形臂托架.安裝尺寸 | Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions |
| ISO 2330 | 叉式起重車.叉臂.技術特性和試驗 | Fork-lift trucks - Fork arms - Technical characteristics and testing |
| ISO 2331 | 叉車 掛鉤型貨叉 術語 三種語言版 | Fork lift trucks; Hook-on type fork arms; Vocabulary Trilingual edition |
| ISO 2344 | 道路車輛 M14×1.25錐座火花塞及氣缸蓋安裝孔 | Road vehicles - M14 × 1,25 spark-plugs with conical seating and their cylinder head housings |
| ISO 2345 | 道路車輛 M18×1.5錐座火花塞及氣缸蓋安裝孔 | Road vehicles - M18×1,5 spark-plugs with conical seating and their cylinder head housing |
| ISO 2346 | 道路車輛 M14×1.25矮型平座火花塞及氣缸蓋安裝孔 | Road vehicles - M14 × 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| ISO 2347 | 道路車輛 M14×1.25矮型錐座火花塞及氣缸蓋安裝孔 | Road vehicles - M14×1,25 compact spark-plugs with conical seating and their cylinder head housing |
| ISO 23671 | 乘用車輪胎.測量相對濕度下夾具性能的辦法.負載下的新輪胎 | Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres |
| ISO 241 | 車刀和刨刀的刀柄 截面的類型和尺寸 | Shanks for turning and planing tools - Shapes and dimensions of the section |
| ISO 24135-1 | 工業用貨車.司機固定系統.第1部分:圍式座位皮帶 | Industrial trucks - Specifications and test methods for operator restraint systems - Part 1: Lap-type seat belts |
| ISO 2416 | 乘用車 質量分布 | Passenger cars; mass distribution |
| ISO 242 | 硬質合金焊接車刀片 | Carbide tips for brazing on turning tools |
| ISO 24254 | 潤滑劑、工業用油和相關產品(L級).E族(內燃機油).四沖程循環摩托車汽油發動機和相關動力傳動系統用油的規范 | Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB) |
| ISO 243 | 硬質合金車刀 外圓車刀 | Turning tools with carbide tips; External tools |
| ISO 24347 | 農用車輛.被牽引和牽引車輛間的機械連接.球狀聯結器設備尺寸(80mm) | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of ball-type coupling device (80 mm) |
| ISO 24535 | 智能運輸系統.自動車輛識別.基本電子注冊識別(基本ERI) | Intelligent transport systems - Automatic vehicle identification - Basic electronic registration identification (Basic ERI) |
| ISO 2534 | 道路車輛 發動機試驗規程 總功率 | Road vehicles - Engine test code - Gross power |
| ISO 2575 AMD 1 | 道路車輛.操縱件、指示器和信號裝置的符號.修改件1 | Road vehicles - Symbols for controls, indicators and tell-tales; Amendment 1 |
| ISO 2575 AMD 2 | 道路車輛.控制裝置、指示器和信號裝置用符號.修改件2 | Road vehicles - Symbols for controls, indicators and tell-tales; Amendment 2 |
| ISO 2575 | 道路車輛.操縱件、指示器和信號裝置的符號 | Road vehicles - Symbols for controls, indicators and tell-tales |
| ISO 2704 | 道路車輛.M10×1平座火花塞及氣缸蓋安裝孔 | Road vehicles - M10 × 1 spark-plugs with flat seating and their cylinder head housings |
| ISO 2705 | 道路車輛.M12×1.25平座火花塞及其氣缸蓋安裝孔 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and their cylinder head housings |
| ISO 2790 | 帶傳動.汽車工業用V帶及帶輪.尺寸 | Belt drives - V-belts for the automotive industry and corresponding pulleys - Dimensions |
| ISO 2929 | 油槽車排吸油用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification |
| ISO 2958 | 道路車輛 乘用車的外部保護 | Road vehicles; Exterior protection for passenger cars |
| ISO 298 | 機床 車床頂尖 互換性尺寸 | Machine tools; Lathe centres; Sizes for interchangeability |
| ISO 3006 | 道路車輛.道路用乘用車車輪.試驗方法 | Road vehicles - Passenger car wheels for road use - Test methods |
| ISO 303 Technical Corrigendum 1 | 道路車輛.汽車及其掛車的照明和光信號裝置的安裝.技術勘誤1 | Road vehicles - Installation of lighting and light signalling devices for motor vehicles and their trailers; Technical Corrigendum 1 |
| ISO 303 | 道路車輛.汽車及其掛車的照明和光信號裝置的安裝 | Road vehicles - Installation of lighting and light signalling devices for motor vehicles and their trailers |
| ISO 3078 | 造船 起貨絞車 | Shipbuilding; Cargo winches |
| ISO 3095 | 鐵路設施.聲學.有軌車輛發出的噪音的測量 | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles |
| ISO 3184 Technical Corrigendum 1 | 前移式和插腿式叉車 穩定性試驗 技術勘誤1 | Reach and straddle fork-lift trucks - Stability tests; Corrigendum 1 |
| ISO 3184 | 前移式和插腿式叉車 穩定性試驗 | Reach and straddle fork-lift trucks - Stability tests |
| ISO 3208 | 道路車輛 乘用車內部凸出物的評價 | Road vehicles; Evaluation of protrusions inside passenger cars |
| ISO 3265 | 松散物料連續搬運設備 鐵路貨車翻車機(回轉式、側卸式和端部卸載式) 安全規則 | Continuous mechanical handling equipment for loose bulk materials; Wagon tipplers handling rail-borne wagons (rotary, side discharge and end discharge); Safety code |
| ISO 3267 | 道路車輛 前照燈清洗器 | Road vehicles; headlamp cleaners |
| ISO 3285 | 道路車輛.點火線圈安裝托架 | Road vehicles; Ignition coil mounting brackets |
| ISO 3287 | 機動工業車輛 操作控制符號和其他圖示符號 | Powered industrial trucks - Symbols for operator controls and other displays |
| ISO 337 Technical Corrigendum 1 | 道路車輛 半掛車牽引座50號連接銷 基本尺寸和裝配尺寸、互換性尺寸 技術勘誤1 | Road vehicles; 50 semi-trailer fifth wheel coupling pin; basic and mounting/interchangeability dimensions; technical corrigendum 1 |
| ISO 337 | 道路車輛 半掛車牽引座50號連接銷 基本尺寸和裝配尺寸、互換性尺寸 | Road vehicles; 50 semi-trailer fifth wheel coupling pin; Basic and mounting/ interchangeability dimensions |
| ISO 3381 | 鐵路設施.聲學.有軌車輛內部噪音的測量 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles |
| ISO 3409 | 乘用車 腳操縱件的橫向空間 | Passenger cars; Lateral spacing of foot controls |
| ISO 3412 | 道路車輛 屏蔽和防水火花塞及其連接 1A和1B型 | Road vehicles; screened and waterproof spark-plugs and their connections; types 1A and 1B |
| ISO 3468 | 乘用車 風擋玻璃除霜系統 試驗方法 | Passenger cars; windscreen defrosting systms; test methods |
| ISO 3469 AMD 1 | 乘用車.風擋玻璃清洗系統.試驗方法.修改件1 | Passenger cars - Windscreen washing systems - Test methods; Amendment 1 |
| ISO 3469 | 乘用車 風擋玻璃清洗系統 試驗方法 | Passenger cars; windscreen washing systems; test methods |
| ISO 3470 | 乘用車 風擋玻璃除霧系統 試驗方法 | Passenger cars - Windscreen demisting systems - Test method |
| ISO 3471 AMD 1 | 土方機械 翻車保護結構 實驗室試驗和性能要求 修改1 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements; Amendment 1 |
| ISO 3471 Technical Corrigendum 1 | 土方機械 翻車保護結構 實驗室試驗和性能要求 技術勘誤1 | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements; Technical Corrigendum 1 |
| ISO 3471 | 土方機械 翻車保護結構 實驗室試驗和性能要求 | Earth-moving machinery; roll-over protective structures; laboratory tests and performance requirements |
| ISO 3536 | 道路車輛 安全玻璃材料 詞匯 兩種語言版 | Road vehicles - Safety glazing materials - Vocabulary |
| ISO 3537 | 道路車輛 安全玻璃材料 力學性能試驗 | Road vehicles - Safety glazing materials - Mechanical tests |
| ISO 3538 | 道路車輛 安全玻璃材料 光學性能試驗方法 | Road vehicles - Safety glazing materials - Test methods for optical properties |
| ISO 3539 | 道路車輛 8型和10型帶有法蘭的噴油器及9型和11型帶緊固平面的噴油器 | Road vehicles; Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11 |
| ISO 3553-1 | 道路車輛 點火線圈和分電器的高壓接頭 第1部分:插座型 | Road vehicles; High-tension connections for ignition coils and distributors; Part 1 : Socket-type |
| ISO 3553-2 | 道路車輛 點火線圈和分電器的高壓接頭 第2部分:插頭型 | Road vehicles - High-tension connectors for ignition coils and distributors - Part 2: Plug-types |
| ISO 3559 | 道路車輛 裝在機動車及其掛車上的燈具的工作電壓 | Road vehicles; Working voltages for lights fitted to motor vehicles and to their trailers |
| ISO 3560 | 道路車輛 正面固定障礙壁或柱體碰撞試驗程序 | Road vehicles - Frontal fixed barrier or pole impact test procedures |
| ISO 3583 | 道路車輛 氣壓制動裝置的壓力試驗連接 | Road vehicles; Pressure test connection for compressed-air pneumatic braking equipment |
| ISO 3584 | 道路車輛 牽引桿連接 互換性 | Road vehicles - Drawbar couplings - Interchangeability |
| ISO 362-1 | 加速道路車輛發出噪聲的測量.工程法.第1部分:M和N分類 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories |
| ISO 362 | 聲學 加速中的道路車輛發射的噪聲測量 工程法 | Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method |
| ISO 3652 | 造船 內河船舶 繩索卷車 | Shipbuilding; Inland vessels; Rope reels |
| ISO 3655 | 帶固定式或移動式工作臺的單柱或雙柱立式車鏜床驗收條件 總論和精度檢驗 | Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table; General introduction and testing of the accuracy |
| ISO 3685 | 單刃車刀的壽命試驗 | Tool-life testing with single-point turning tools |
| ISO 3691 AMD 1 | 機動工業車輛 安全規則 修改1 | Powered industrial trucks; safety code; amendment 1 |
| ISO 3691 | 機動工業車輛 安全規則 | Powered industrial trucks; Safety code |
| ISO 3731 | 道路車輛.牽引車和掛車之間電氣連接用連接器.帶24V標稱電源電壓的車輛用24S(補充)型7極連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage |
| ISO 3732 | 道路車輛.牽引車和掛車之間電氣連接用連接器.帶12V標稱電源電壓的車輛用12S(補充)型7極連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage |
| ISO 3739-2 | 工業車輛輪胎和輪輞.第2部分:5°或平底輪輞的充氣輪胎(米制系列).額定負荷 | Industrial tyres and rims; part 2: pneumatic tyres (metric series) on 5° tapered or flat base rims; load ratings |
| ISO 3739-3 | 工業車輛輪胎和輪輞 第3部分:輪輞 | Industrial tyres and rims - Part 3: Rims |
| ISO 3779 | 道路車輛 車輛識別號碼(VIN) 內容和結構 | Road vehicles; Vehicle identification number (VIN); Content and structure |
| ISO 3780 | 道路車輛 世界制造廠商識別代碼(WMI) | Road vehicles; World manufacturer identifier (WMI) code |
| ISO 3784 | 道路車輛 碰撞試驗中沖擊速度的測量 | Road vehicles; Measurement of impact velocity in collision tests |
| ISO 3795 | 農林用道路車輛、拖拉機和機械 內部材料燃燒性能的測定 | Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials |
| ISO 3803 | 道路車輛 制動裝置的液壓試驗連接 | Road vehicles; Hydraulic pressure test connection for braking equipment |
| ISO 3808 | 道路車輛.無屏蔽高電壓點火電纜.總規范、試驗方法和要求 | Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements |
| ISO 3833 | 道路車輛 類型 術語和定義 | Road vehicles; Types; Terms and definitions |
| ISO 3842 | 道路車輛.(半掛牽引車)牽引座.互換性 | Road vehicles - Fifth wheels - Interchangeability |
| ISO 3853 | 道路車輛 牽引或輕型掛車的牽引車連接裝置 機械強度試驗 | Road vehicles - Towing vehicle coupling device to tow caravans or light trailers - Mechanical strength test |
| ISO 3871 | 道路車輛 石油基或非石油基制動液容器的標記 | Road vehicles - Labelling of containers for petroleum or non-petroleum base brake fluid |
| ISO 3874 AMD 3 | 系列1集裝箱.裝卸與加固.修改件3:雙垛軌道車操作 | Series 1 freight containers - Handling and securing; Amendment 3: Double stack rail car operations |
| ISO 3888-1 | 乘用車 急劇改變車道的操縱用試驗車道 第1部分:兩車道變換 | Passenger cars - Test track for a severe lane-change manoeuvre - Part 1: Double-lane change |
| ISO 3888-2 | 乘用車.車道急劇改變操縱用試驗車道.第2部分:故障免除 | Passenger cars - Test track for a severe lane-change manoeuvre - Part 2: Obstacle avoidance |
| ISO 3894 | 道路車輛.商用車輛的車輪/輪輞.試驗方法 | Road vehicles - Wheels/rims for commercial vehicles - Test methods |
| ISO 3895 | 道路車輛 屏蔽和防水火花塞及其連接 2型 | Road vehicles; Screened and waterproof spark-plug and its connection; Type 2 |
| ISO 3896 | 道路車輛 屏蔽和防水火花塞及其連接 3型 | Road vehicles; Screened and waterproof spark-plug and its connection; Type 3 |
| ISO 3911 | 充氣輪胎用車輪和輪輞.詞匯、標識和標記 | Wheels and rims for pneumatic tyres - Vocabulary, designation and marking |
| ISO 3917 | 道路車輛 安全玻璃材料 耐輻射、耐高溫、耐濕度、耐燃燒和耐模擬氣候的試驗方法 | Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
| ISO 3929 | 道路車輛.在檢驗或維修過程中廢氣排放量的測量方法 | Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance |
| ISO 3930 AMD 1 | 機動車排氣的測量儀器.修改件1 | Instruments for measuring vehicle exhaust emissions; Amendment 1 |
| ISO 3930 | 測量車輛廢氣排放的儀器 | Instruments for measuring vehicle exhaust emissions |
| ISO 3958 | 乘用車 駕駛員手控活動范圍 | Passenger cars - Driver hand-control reach |
| ISO 3984 | 道路車輛.后部移動障礙壁沖擊試驗過程 | Road vehicles - Rear moving barrier impact test procedure |
| ISO 3996 | 道路車輛 使用非石油基制動液的液壓制動系統軟管組件 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| ISO 4000-1 | 乘用車輪胎和輪輞.第1部分:輪胎(米制系列) | Passenger car tyres and rims - Part 1: Tyres (metric series) |
| ISO 4000-2 | 乘用車輪胎和輪輞.第2部分:輪輞 | Passenger car tyres and rims - Part 2: Rims |
| ISO 4008-1 | 道路車輛 噴油泵試驗 第1部分:動態條件 | Road vehicles; Fuel injection pump testing; Part 1 : Dynamic conditions |
| ISO 4008-2 | 道路車輛 噴油泵試驗 第2部分:靜態條件 | Road vehicles; Fuel injection pump testing; Part 2 : Static conditions |
| ISO 4008-3 AMD 1 | 道路車輛.噴油泵試驗.第3部分:應用和試驗程序.修改1 | Road vehicles - Fuel injection pump testing - Part 3: Application and test procedures; Amendment 1 |
| ISO 4008-3 | 道路車輛 噴油泵試驗 第3部分:應用和試驗程序 | Road vehicles; Fuel injection pump testing; Part 3 : Application and test procedures |
| ISO 4009 | 商業車輛 牽引車和掛車之間電氣和氣動連接的配置 | Commercial vehicles - Location of electrical and pneumatic connections between towing vehicles and trailers |
| ISO 4020 | 道路車輛 柴油機過濾器 試驗方法 | Road vehicles - Fuel filters for diesel engines - Test methods |
| ISO 4024 | 道路車輛.點火線圈.低壓電纜連接 | Road vehicles; ignition coils; low-tension cable connections |
| ISO 4030 | 道路車輛 車輛識別代碼(VIN) 位置和固定 | Road vehicles; Vehicle identification number (VIN); Location and attachment |
| ISO 4038 | 道路車輛 液壓制動系統 單喇叭口管、螺孔和陽螺紋接頭和軟管管端接頭 | Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings |
| ISO 4039-1 | 道路車輛 氣壓制動系統 第1部分:有平面密封面的管、陽螺紋管接頭和螺紋孔 | Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface |
| ISO 4039-2 | 道路車輛 氣壓制動系統 第2部分:有錐形密封面的管、陽螺紋管接頭和螺紋孔 | Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface |
| ISO 4040 | 道路車輛 機動車輛中的手操縱件、指示器和信號裝置的位置 | Road vehicles - Location of hand controls, indicators and tell-tales in motor vehicles |
| ISO 4082 | 道路車輛 機動車 閃光裝置 | Road vehicles; Motor vehicles; Flasher units |
| ISO 4086 | 道路車輛 半掛車牽引座的90號連接銷 互換性 | Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability |
| ISO 4091 | 道路車輛.牽引車和掛車之間電氣連接用連接器.定義、試驗和要求 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements |
| ISO 4100 | 道路車輛 世界零部件制造廠商識別代碼(WPMI) | Road vehicles; World parts manufacturer identifier (WPMI) code |
| ISO 4106 | 摩托車.發動機試驗規程.凈功率 | Motorcycles - Engine test code - Net power |
| ISO 4107 | 商用車輛 輪轂安裝尺寸 | Commercial vehicles - Wheel hub attachment dimensions |
| ISO 4113 | 道路車輛 柴油機噴油泵的校泵油 | Road vehicles; calibration fluid for diesel injection equipment |
| ISO 4129 | 機動腳踏兩用車 操縱件、指示器和信號裝置的符號 | Mopeds; symbols for controls, indicators and tell-tales |
| ISO 4130 | 道路車輛 三維基準系統和基準符號 定義 | Road vehicles; Three-dimensional reference system and fiducial marks; Definitions |
| ISO 4131 | 道路車輛 乘用車的尺寸代碼 | Road vehicles; Dimensional codes for passenger cars |
| ISO 4138 | 乘用車.穩態環行駕駛.開環試驗程序 | Passenger cars - Steady-state circular driving behaviour - Open-loop test methods |
| ISO 4141-1 | 道路車輛.多芯連接電纜.第1部分:基本性能鎧裝電纜的試驗方法和要求 | Road vehicles - Multi-core connecting cables - Part 1: Test methods and requirements for basic performance sheathed cables |
| ISO 4141-2 | 道路車輛.多芯連接電纜.第2部分:高性能鎧裝電纜的試驗方法和要求 | Road vehicles - Multi-core connecting cables - Part 2: Test methods and requirements for high performance sheathed cables |
| ISO 4141-3 | 道路車輛.多芯連接電纜.第3部分:非屏蔽鎧裝低壓電纜的結構、尺寸和標記 | Road vehicles - Multi-core connecting cables - Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables |
| ISO 4141-4 | 道路車輛 多芯連接電纜 第4部分：鉸鏈試驗方法和對裝芯電纜組件的要求 | Road vehicles - Multi-core connecting cables - Part 4: Articulation test methods and requirements for coiled cable assemblies |
| ISO 4148 | 道路車輛.專用警示信號燈.尺寸 | Road vehicles - Special warning lamps - Dimensions |
| ISO 4151 | 道路車輛 輕便摩托車 操縱件的型式、定位和功能 | Road vehicles; Mopeds; Type, location and functions of controls |
| ISO 4164 | 道路車輛 輕便摩托車 發動機試驗規程 凈功率 | Road vehicles; Mopeds; Engine test code; Net power |
| ISO 4165 | 道路車輛 電氣連接 雙極接線盒 | Road vehicles - Electrical connections - Double-pole connection |
| ISO 4182 | 汽車 變暗光束前照燈角度隨載荷變化的測量 | Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load |
| ISO 4209-1 | 貨車和公共汽車輪胎和輪輞(米制系列) 第1部分:輪胎 | Truck and bus tyres and rims (metric series) - Part 1: Tyres |
| ISO 4209-2 | 貨車和公共汽車輪胎和輪輞(米制系列) 第2部分:輪輞 | Truck and bus tyres and rims (metric series) - Part 2: Rims |
| ISO 4210 | 自行車 自行車的安全要求 | Cycles - Safety requirements for bicycles |
| ISO 4249-1 | 摩托車輪胎和輪輞(代號規格系列) 第1部分:輪胎 | Motorcycle tyres and rims (Code designated series); Part 1 : Tyres |
| ISO 4249-2 | 摩托車輪胎和輪輞(代號規格系列) 第2部分:輪胎額定載荷值 | Motorcycle tyres and rims (code-designated series); part 2: tyre load ratings |
| ISO 4249-3 | 摩托車輪胎和輪輞(代號規格系列).第3部分:輪輞 | Motorcycle tyres and rims (code-designated series) - Part 3: Rims |
| ISO 4513 | 道路車輛.能見度.駕駛員眼睛位置的眼睛活動范圍的確定方法 | Road vehicles - Visibility - Method for establishment of eyellipses for driver's eye location |
| ISO 4925 | 道路車輛.液壓系統用非石油基制動液的規范 | Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems |
| ISO 4926 | 道路車輛.液壓制動系統.非石油基基準液 | Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids |
| ISO 4927 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度120℃) | Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| ISO 4928 | 道路車輛.使用非石油基液壓制動液的液壓制動系統液壓缸的彈性皮碗和密封圈(最高工作溫度120℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| ISO 4929 | 道路車輛 使用非石油基液壓制動液的液壓制動主液壓缸儲油器的膜片密封墊 | Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
| ISO 4930 | 道路車輛.使用非石油基液壓制動液的液壓制動盤式液壓缸的彈性密封墊(最高工作溫度150℃) | Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.) |
| ISO 504 | 硬質合金車刀 名稱和標志 | Turning tools with carbide tips; Designation and marking |
| ISO 5053 | 機動工業車輛 術語 兩種語言版 | Powered industrial trucks; Terminology Bilingual edition |
| ISO 5057 | 工業車輛 叉車貨叉在使用中的檢查和修復 | Industrial trucks; inspection and repair of fork arms in service on fork-lift trucks |
| ISO 509 | 托盤搬運車 基本尺寸 | Pallet trucks - Principal dimensions |
| ISO 5128 | 聲學 汽車內的噪聲的測量 | Acoustics; Measurement of noise inside motor vehicles |
| ISO 5130 | 聲學.平穩道路車輛發射聲壓級的測量 | Acoustics - Measurements of sound pressure level emitted by stationary road vehicles |
| ISO 514 | 硬質合金車刀 內圓車刀 | Turning tools with carbide tips; Internal tools |
| ISO 5287 | 皮帶傳動.汽車工業用窄V帶.疲勞試驗 | Belt drives - Narrow V-belts drives for the automotive industry - Fatigue test |
| ISO 5422 | 道路車輛 拖繩、拖纜或拖棒的固定 | Road vehicles; Anchorages for towing ropes, cables or bars |
| ISO 5608 | 可轉位刀片的車削和仿形切削刀夾和刀夾頭 名稱 | Turning and copying tool holders and cartridges for indexable inserts - Designation |
| ISO 5610 DAM 1 | 可轉位的刀片的車刀和仿形刀桿.尺寸.第1次修改:帶菱V型轉位刀片的H、J和V型刀片座 | Single-point tool holders for turning and copying, for indexable inserts; dimensions; amendment 1: tool holders style H, J and V, with rhombic V-shape indexable inserts |
| ISO 5610 | 帶可轉位刀片的車削和仿形切削用單刃刀夾 尺寸 | Single-point tool holders for turning and copying, for indexable inserts - Dimensions |
| ISO 5669 | 農業掛車和掛車設備 制動液壓缸 規范 | Agricultural trailers and trailed equipment; Braking cylinders; Specifications |
| ISO 5670 | 農業掛車 單向作用的伸縮傾翻式液壓缸 25 MPa(250巴)系列 1、2和3型 互換性尺寸 | Agricultural trailers; Single-acting telescopic tipping cylinders; 25 MPa (250 bar) series; Types 1, 2 and 3; Interchangeability dimensions |
| ISO 5692-1 | 農用車輛.拖掛車輛的機械連接裝置.第1部分:掛接環的尺寸 | Agricultural vehicles - Mechanical connections on towed vehicles - Part 1: Dimensions for hitch rings |
| ISO 5692-2 Technical Corrigendum 1 | 農用車輛.拖掛車輛的機械連接裝置.第2部分:帶座孔的連接環40.技術勘誤1 | Agricultural vehicles - Mechanical connections on towed vehicles - Part 2: Coupling ring 40 with socket; Technical Corrigendum 1 |
| ISO 5692-2 | 農用車輛.拖掛車輛的機械連接裝置.第2部分: 帶40座孔的連接環 | Agricultural vehicles - Mechanical connections of towed vehicles - Part 2: Coupling ring 40 with socket |
| ISO 5696 | 牽引式農業車輛 制動器和制動裝置 實驗室試驗方法 | Trailed agricultural vehicles; Brakes and braking devices; Laboratory test method |
| ISO 5697 | 農林車輛 制動性能的測定 | Agricultural and forestry vehicles; Determination of braking performance |
| ISO 5740 | 道路車輛 后視鏡 測定反射率的試驗方法 | Road vehicles; Rear view mirrors; Test method for determining reflectance |
| ISO 5751-1 Technical Corrigendum 1 | 摩托車輪胎和輪輞(米制系列).第1部分:設計指南.技術勘誤1 | Motorcycle tyres and rims (metric series) - Part 1: Design guides; Technical Corrigendum 1 |
| ISO 5751-1 | 摩托車輪胎和輪輞(米制系列).第1部分:設計指南 | Motorcycle tyres and rims (metric series) - Part 1: Design guides |
| ISO 5751-2 | 摩托車輪胎和輪輞(米制系列).第2部分:輪胎尺寸和載荷能力 | Motorcycle tyres and rims (metric series) - Part 2: Tyre dimensions and load-carrying capacities |
| ISO 5751-3 | 摩托車輪胎和輪輞(米制系列).第3部分:配套輪輞輪廓范圍 | Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours |
| ISO 5766 | 托盤堆碼車和高起升平臺車 穩定性試驗 | Pallet stackers and high-lift platform trucks; stability tests |
| ISO 5767 AMD 1 | 工業車輛在門架前傾條件下堆垛作業 附加穩定性試驗 修改1 | Industrial trucks operating in special condition of stacking with mast tilted forward - Additional stability test; Amendment 1 |
| ISO 5767 | 工業車輛在門架前傾條件下堆垛作業 附加穩定性試驗 | Industrial trucks operating in special condition of stacking with mast tilted forward; additional stability test |
| ISO 5775-1 | 自行車輪胎和輪輞 第1部分:輪胎名稱和尺寸 | Bicycle tyres and rims - Part 1: Tyre designations and dimensions |
| ISO 5775-2 AMD 1 | 自行車輪胎和輪輞 第2部分:輪輞 修改1 | Bicycle tyres and rims - Part 2: Rims; Amendment 1 |
| ISO 5775-2 | 自行車輪胎和輪輞 第2部分:輪輞 | Bicycle tyres and rims - Part 2: Rims |
| ISO 5897 | 乘用車 后車窗除霧系統 試驗方法 | Passenger cars - Rear-window demisting system - Test method |
| ISO 5898 | 乘用車 后車窗除霜系統 試驗方法 | Passenger cars - Rear-window defrosting system - Test method |
| ISO 5948 | 鐵路車輛材料 超聲波驗收檢驗 | Railway rolling stock material - Ultrasonic acceptance testing |
| ISO 6054-1 | 摩托車輪胎和輪輞(代號規格系列) 4-12直徑代號 第1部分:輪胎 | Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12 - Part 1: Tyres |
| ISO 6054-2 | 摩托車輪胎和輪輞(代號規格系列) 4～12直徑代號 第2部分:輪輞 | Motorcycle tyres and rims (code-designated series); diameter codes 4 to 12; part 2: rims |
| ISO 6055 | 工業用貨車.護頂架.規范和檢驗 | Industrial trucks - Overhead guards - Specification and testing |
| ISO 611 | 道路車輛.機動車及其掛車的制動.詞匯 | Road vehicles - Braking of automative vehicles and their trailers - Vocabulary |
| ISO 6115 | 造船 拖網絞車 | Shipbuilding; trawl winches |
| ISO 6117 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度100℃) | Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.) |
| ISO 6118 | 道路車輛.使用非石油基制動液的液壓制動促動缸的彈性皮碗和密封圈(最高工作溫度70℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.) |
| ISO 6119 | 道路車輛.使用非石油基液壓制動液的液壓盤式制動液壓缸的彈性密封墊(最高工作溫度120℃) | Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| ISO 612 | 道路車輛 機動車和掛車的尺寸 術語和定義 | Road vehicles; Dimensions of motor vehicles and towed vehicles; Terms and definitions |
| ISO 6120 | 道路車輛.使用石油基液壓液的液壓制動系統制動軟管總成 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid |
| ISO 6155 | 機床 臥式轉塔車床和單軸自動車床檢驗條件 精度檢驗 | Machine tools - Test conditions for horizontal spindle turret and single spindle automatic lathes - Testing of the accuracy |
| ISO 6182-10 | 消防.自動噴水滅火系統.第10部分:家用灑水車的要求和試驗方法 | Fire protection - Automatic sprinkler systems - Part 10: Requirements and test methods for domestic sprinklers |
| ISO 6219 | 造船 內河船舶 起錨機和起錨絞車 | Shipbuilding; Inland vessels; Windlasses and anchor capstans |
| ISO 6255 | 乘用車 乘用車后窗洗滌和刮刷系統 試驗方法 | Passenger cars - Rear-window washing and wiping systems - Test methods |
| ISO 6292 | 機動工業車輛和牽引車 制動器性能和零件強度 | Powered industrial trucks and tractors - Brake performance and component strength |
| ISO 6310 | 道路車輛 制動襯片 壓縮應力試驗方法 | Road vehicles - Brake linings - Compressive strain test method |
| ISO 6311 | 道路車輛 制動襯片 襯片材料的內剪切強度 試驗程序 | Road vehicles; Brake linings; Internal shear strength of lining material; Test procedure |
| ISO 6312 | 道路車輛 制動襯片 盤式制動塊和鼓式制動蹄組件的剪切試驗程序 | Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies |
| ISO 6313 | 道路車輛 制動襯片 盤式制動塊尺寸和形狀的熱效應 試驗程序 | Road vehicles; Brake linings; Effects of heat on dimensions and form of disc brake pads; Test procedure |
| ISO 6314 | 道路車輛 制動襯片 耐水、耐鹽溶液、耐油和耐制動液的性能 試驗程序 | Road vehicles; Brake linings; Resistance to water, saline solution, oil and brake fluid; Test procedure |
| ISO 6315 | 道路車輛 制動襯片 腐蝕引起的襯片鐵質結合面的粘結 試驗程序 | Road vehicles; Brake linings; Seizure to ferrous mating surface due to corrosion; Test procedure |
| ISO 6452 | 橡膠或塑料涂層織物.汽車內裝飾材料霧氣凝結特征的測定 | Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 6460-1 | 摩托車.廢氣排放和燃料消耗測量方法.第1部分:一般試驗要求 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements |
| ISO 6460-2 | 摩托車.廢氣排放和燃料消耗測量方法.第2部分:試驗循環和特殊試驗條件 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions |
| ISO 6460-3 | 摩托車.廢氣排放和燃料消耗測量方法.第3部分:恒速下的燃料消耗測量 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed |
| ISO 6469-1 | 道路電氣車輛 安全規范 第1部分：車載電能儲存 | Electric road vehicles - Safety specifications - Part 1: On-board electrical energy storage |
| ISO 6469-2 | 道路電氣車輛 安全規范 第2部分：功能安全方法和失效防護 | Electric road vehicles - Safety specifications - Part 2: Functional safety means and protection against failures |
| ISO 6469-3 Technical Corrigendum 1 | 電動道路車輛.安全性規范.第3部分:人員的電危險防護.技術勘誤1 | Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards; Technical Corrigendum 1 |
| ISO 6469-3 | 道路電氣車輛 安全規范 第3部分：使人免受電氣傷害的保護 | Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards |
| ISO 6483 Technical Corrigendum 1 | 土方機械.自卸車車廂.容量標定.技術勘誤1 | Earth-moving machinery - Dumper bodies - Volumetric rating; Technical Corrigendum 1 |
| ISO 6483 | 土方機械 自卸車車廂 容量標定 | Earth-moving machinery; Dumper bodies; Volumetric rating |
| ISO 6487 | 道路車輛.沖擊試驗測量技術.儀器設備 | Road vehicles - Measurement techniques in impact tests - Instrumentation |
| ISO 6489-1 | 農業車輛 被牽引和牽引車之間的機械連接裝置 第1部分:掛勾尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 1: Dimensions of hitch-hooks |
| ISO 6489-2 | 農用車輛.機械連接裝置間拖繩和牽引車輛.第2部分:40 U型鉤規范 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2: Specifications for clevis coupling 40 |
| ISO 6489-3 | 農業車輛.被牽引和牽引車之間的機械連接裝置.第3部分:拖拉機牽引桿 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 3: Tractor drawbar |
| ISO 6489-4 | 農用車輛.被牽引和牽引車間的機械連接裝置.第4部分:楔式耦合裝置的尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 4: Dimensions of piton-type coupling |
| ISO 65 | 按照ISO 7/1 車螺紋的碳素鋼管 | Carbon steel tubes suitable for screwing in accordance with ISO 7/1 |
| ISO 6518-1 | 道路車輛.點火系統.第1部分:詞匯 | Road vehicles - Ignition systems - Part 1: Vocabulary |
| ISO 6518-2 Technical Corrigendum 1 | 道路車輛 點火系統 第2部分:電氣性能和功能試驗方法 技術勘誤1 | Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods; Technical Corrigendum 1 |
| ISO 6518-2 | 道路車輛 點火系統 第2部分:電氣性能和功能試驗方法 | Road vehicles - Ignition systems - Part 2: Electrical performance and function test methods |
| ISO 6546 | 道路車輛.乘車人約束性能評價用事故數據的收集 | Road vehicles - Collection of accident data for evaluation of occupant restraint performance |
| ISO 6549 | 道路車輛 H-和R-點(臀)測定規程 | Road vehicles - Procedure for H- and R-point determination |
| ISO 6550-1 | 道路車輛 帶錐座的封閉型電熱塞及其氣缸蓋安裝孔尺寸 第1部分:M14×1.25電熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 1: M14 × 1,25 glow-plugs |
| ISO 6550-2 | 道路車輛 帶錐座的封閉型電熱塞及其氣缸蓋安裝孔尺寸 第2部分:M12×1.25電熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 × 1,25 glow-plugs |
| ISO 6550-3 | 道路車輛.帶錐形座的罩型熱線點火塞及其汽缸蓋.第3部分:M10熱線點火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs |
| ISO 6550-4 | 道路車輛.帶錐座的封閉型電熱塞及其汽缸蓋.第4部分:M8 x 1電熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs |
| ISO 6555 | 造船 頂索定位絞車 | Shipbuilding; topping winches |
| ISO 6597 | 道路車輛.機動車用帶有電子控制功能的液壓制動系統.試驗過程 | Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures |
| ISO 6661 | 新鮮水果和蔬菜 陸路運輸車輛上平行六面體包裝件的排列 | Fresh fruits and vegetables; Arrangement of parallelepipedic packages in land transport vehicles |
| ISO 6692 | 自行車 零部件標記 | Cycles; Marking of cycle components |
| ISO 6695 | 自行車 方榫中軸和曲柄的配合 裝配尺寸 | Cycles; pedal axle and crank assembly with square end fitting; assembly dimensions |
| ISO 6696 | 自行車 用于中接頭裝配的螺紋 | Cycles; screw threads used in bottom bracket assemblies |
| ISO 6697 | 自行車 前、后軸和飛輪 裝配尺寸 | Cycles - Hubs and freewheels - Assembly dimensions |
| ISO 6698 | 自行車 飛輪與自行車后軸身的裝配螺紋 | Cycles; screw threads used to assemble freewheels on bicycle hubs |
| ISO 6699 | 自行車 把橫管和把立管接頭 裝配尺寸 | Cycles; stem and handlebar bend; assembly dimensions |
| ISO 6701 | 自行車 輻條條母的外形尺寸 | Cycles; external dimensions of spoke nipples |
| ISO 6722 | 道路車輛.60V和600V單芯電纜.尺寸、試驗方法和要求 | Road vehicles - 60 V and 600 V single-core cables - Dimensions, test methods and requirements |
| ISO 6725 | 道路車輛 兩輪輕便摩托車和摩托車的尺寸 術語和定義 | Road vehicles; Dimensions of two-wheeled mopeds and motorcycles; Terms and definitions |
| ISO 6726 | 兩輪輕便摩托車和摩托車 質量 詞匯 兩種語言版 | Mopeds and motorcycles with two wheels; masses; vocabulary |
| ISO 6727 | 道路車輛 摩托車 操縱件、指示器和信號裝置的符號 | Road vehicles; Motorcycles; Symbols for controls, indicators and telltales |
| ISO 6742-1 | 自行車 照明和反射裝置 光學和物理要求 第1部分:照明設備 | Cycles; Lighting and retro-reflective devices; Photometric and physical requirements; Part 1 : lighting equipment |
| ISO 6742-2 | 自行車 照明和反射裝置 光學和物理要求 第2部分:反射裝置 | Cycles; Lighting and retro-reflective devices; Photometric and physical requirements; Part 2 : Retro-reflective devices |
| ISO 6786 | 道路車輛 氣壓制動系統 各分總成連接的識別 | Road vehicles; Air braking systems; Identification of connections on units |
| ISO 6797 | 道路車輛 機動車 對閃光器的生產一致性的要求 | Road vehicles; Motor vehicles; Production conformity requirements for flasher units |
| ISO 6813 | 道路車輛 碰撞分類 術語 兩種語言版 | Road vehicles - Collision classification - Terminology |
| ISO 6855 | 道路車輛 裝有控制點火發動機裝置的機動自行車排出氣體污染物的測量方法 | Road vehicles; Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine |
| ISO 6856 | 道路車輛.非屏蔽高電壓點火電纜組件.試驗方法和一般要求 | Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements |
| ISO 6933 | 鐵路車輛材料 磁粉驗收檢驗 | Railway rolling stock material; magnetic particle acceptance testing |
| ISO 6969 | 道路車輛.音響信號裝置.裝車后的試驗 | Road vehicles - Sound signalling devices - Tests after mounting on vehicle |
| ISO 6970 | 摩托車和輕便摩托車 污染試驗 底盤測功機臺架 | Motorcycles and mopeds - Pollution tests - Chassis dynamometer bench |
| ISO 7030 | 道路車輛 12、13、14、15、16、17、18和19型螺旋擰入式噴嘴器件 | Road vehicles; Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 |
| ISO 7072 | 農林用拖拉機和機械 車軸銷和彈簧銷 尺寸和要求 | Tractors and machinery for agriculture and forestry; linch pins and spring pins; dimensions and requirements |
| ISO 7116 | 輕便摩托車 最大速度的測量 | Mopeds - Measurement of maximum speed |
| ISO 7117 | 摩托車 最大速度的測量 | Motorcycles - Measurement of maximum speed |
| ISO 7132 | 土方機械.自動傾卸車.術語和商業規范 | Earth-moving machinery - Dumpers - Terminology and commercial specifications |
| ISO 7141 | 道路車輛.輕合金輪.碰撞試驗 | Road vehicles - Light alloy wheels - Impact test |
| ISO 7152 AMD 1 | 野營帳蓬和大蓬車蓬布.術語和等效術語表.修改件1 | Camping tents and caravan awnings - Vocabulary and list of equivalent terms; Amendmen 1 |
| ISO 7152 | 野營帳篷和旅居車天篷 詞匯和等效術語表 兩種語言版 | Camping tents and caravan awnings - Vocabulary and list of equivalent terms |
| ISO 7176-19 | 輪椅 第19部分：機動車輛用有輪移動設備 | Wheelchairs - Part 19: Wheeled mobility devices for use in motor vehicles |
| ISO 7176-21 | 輪椅.第21部分:電動輪椅和小型電動摩托車的電磁兼容性要求和試驗方法 | Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
| ISO 7176-4 | 輪椅 第4部分:確定電動輪椅和小型摩托車?yán)碚撔旭偩嚯x范圍的能量消耗 | Wheelchairs - Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
| ISO 7227 AMD 1 | 道路車輛.照明和光信號裝置.詞匯.修改件1 | Road vehicles - Lighting and light signalling devices - Vocabulary; Amendment 1 |
| ISO 7227 | 道路車輛 照明和光信號裝置 詞匯 三種語言版 | Road vehicles; Lighting and light signalling devices; Vocabulary Trilingual edition |
| ISO 7237 AMD 1 | 旅居車 質量和尺寸 詞匯 兩種語言版 修改1 | Caravans - Masses and dimensions - Vocabulary; Amendment 1 |
| ISO 7237 | 旅居車 質量和尺寸 詞匯 兩種語言版 | Caravans; masses and dimensions; vocabulary |
| ISO 7284 | 電阻焊設備 汽車工業用多點點焊的兩個單獨副線圈的變壓器的特殊技術條件 | Resistance welding equipment; particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry |
| ISO 7308 | 道路車輛 儲能液壓制動用的石油基制動液 | Road vehicles; Petroleum-based brake-fluid for stored-energy hydraulic brakes |
| ISO 7309 | 道路車輛 液壓制動系統 ISO標準石油基液 | Road vehicles; Hydraulic braking systems; ISO reference petroleum base fluid |
| ISO 7364 | 造船及海上結構物 甲板機械 舷梯絞車 | Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches |
| ISO 7365 | 造船及海上結構物 甲板機械 深海用拖纜絞車 | Shipbuilding and marine structures; Deck machinery; Towing winches for deep sea use |
| ISO 7375-1 | 道路車輛 牽引車和掛車之間氣壓制動連接用蛇形管組件 第1部分:尺寸 | Road vehicles; Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles; Part 1 : Dimensions |
| ISO 7375-2 | 道路車輛 牽引車和掛車之間氣壓制動連接用蛇形管組件 第2部分:性能要求 | Road vehicles - Coiled tube assemblies for air brake connection between towing and towed vehicles - Part 2: Performance requirements |
| ISO 7397-1 | 乘用車 駕駛員直接視野的驗證 第1部分:車輛靜態測量定位 | Passenger cars; verification of driver's direct field of view; part 1: vehicle positioning for static measurement |
| ISO 7397-2 | 乘用車 駕駛員直接視野的驗證 第2部分:試驗方法 | Passenger cars; verification of driver's direct field of view; part 2: test method |
| ISO 7398 | 摩托車 直流閃光器 | Motorcycles; direct current flasher units |
| ISO 7399 | 摩托車 交流閃光器 | Motorcycles; alternating current flasher units |
| ISO 7400 | 輕便摩托車 交流閃光器 | Mopeds; alternating current flasher units |
| ISO 7401 | 道路車輛.橫向瞬態響應的試驗方法.開路試驗方法 | Road vehicles - Lateral transient response tests methods - Open-loop test methods |
| ISO 7440-1 | 道路車輛 噴油泵試驗臺 第1部分:標準噴油器總成 | Road vehicles; fuel injection equipment testing; part 1: calibration nozzle and holder assemblies |
| ISO 7440-2 | 道路車輛 噴油泵試驗臺 第2部分:孔板流量測量 | Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement |
| ISO 7575 | 商用道路車輛 平面連接的車輪固定螺母 | Commercial road vehicles; flat attachment wheel fixing nuts |
| ISO 7576 | 道路車輛 壓燃式發動機的兩級燃油濾清器 裝配和連接尺寸 | Road vehicles; two-stage fuel filters for compression-ignition engines; mounting and connecting dimensions |
| ISO 7578 | 道路車輛 封閉型電熱塞 一般要求和試驗方法 | Road vehicles - Sheath-type glow-plugs - General requirements and test methods |
| ISO 7588-1 | 道路車輛 電氣/電子開關設備 第1部分:繼電器和閃光器 | Road vehicles - Electrical/electronic switching devices - Part 1: Relays and flashers |
| ISO 7588-2 | 道路車輛 電氣/電子開關設備 第2部分:電子裝置 | Road vehicles - Electrical/electronic switching devices - Part 2: Electronic devices |
| ISO 7588-3 | 道路車輛 電氣/電子開關設備 第3部分:微繼電器 | Road vehicles - Electrical/electronic switching devices - Part 3: Microrelays |
| ISO 7591 | 道路車輛 機動車和掛車的反光注冊牌照 規范 | Road vehicles; Retro-reflective registration plates for motor vehicles and trailers; Specification |
| ISO 7598 | 適于按照ISO 7/1車螺紋用不銹鋼管 | Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 7628-1 | 道路車輛 氣壓制動系統用熱塑管材 第1部分:尺寸和標記 | Road vehicles - Thermoplastics tubing for air braking systems - Part 1: Dimensions and marking |
| ISO 7628-2 Technical Corrigendum 1 | 道路車輛 氣壓制動系統用熱塑管材 第2部分:車輛上的安裝和試驗方法 技術勘誤1 | Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods; Technical Corrigendum 1 |
| ISO 7628-2 | 道路車輛 氣壓制動系統用熱塑管材 第2部分:車輛上的安裝和試驗方法 | Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods |
| ISO 7629 | 道路車輛 制動襯片 盤式制動塊 試驗后表面和材料傷殘的評定 | Road vehicles; Brake linings; Disc brake pads; Evaluation of surface and material flaws after testing |
| ISO 7630 | 道路車輛 使用石油基液壓制動液的鼓式制動輪缸的彈性O(shè)形密封圈(最高工作溫度120℃) | Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7631 | 道路車輛 使用石油基液壓制動液的液壓制動系統液壓缸的彈性皮碗和密封墊圈(最高工作溫度120℃) | Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7632 | 道路車輛 使用石油基液壓制動液的液壓盤式制動液壓缸的彈性密封墊圈(最高工作溫度120℃) | Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7633 | 道路車輛 使用石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度120℃) | Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7634 | 道路車輛.包括具有電子制動控制功能的受牽引車輛用壓縮空氣制動系統 | Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions - Test procedures |
| ISO 7635 | 道路車輛.包括有電子控制功能的機動車輛在內的機動車輛用氣壓或氣動/液壓制動系統.試驗規程 | Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures |
| ISO 7637-1 | 道路車輛.由傳導和耦合引起的電干擾.第1部分:定義和總則 | Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations |
| ISO 7637-2 | 道路車輛.傳導和耦合引起的電干擾.第2部分:僅沿電源線瞬間電導 | Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only |
| ISO 7637-3 | 道路車輛.傳導和耦合引起的電干擾.第3部分:通過電容耦合和電感耦合經由非電源線線路的瞬間電傳輸 | Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 7638-1 | 道路車輛.牽引車和掛車的電氣連接用連接器.第1部分:具有24V標稱電源電壓的車輛的制動系統和行駛系用連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage |
| ISO 7638-2 | 道路車輛.牽引車和掛車的電氣連接用連接器.第2部分:具有12V標稱電源電壓的車輛的制動系統和行駛系用連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage |
| ISO 7639 | 道路車輛 診斷系統 圖形符號 兩種語言版 | Road vehicles; Diagnostic systems; Graphical symbols Bilingual edition |
| ISO 7641-1 | 道路車輛 旅居車和輕型掛車 牽引桿的機械強度計算 第1部分:鋼牽引桿 | Road vehicles; Caravans and light trailers; Calculation of the mechanical strength of the drawbar; Part 1 : Steel drawbars |
| ISO 7642 | 旅居掛車和輕型掛車 帶有防撞擊主車的制動器的01類和02類掛車 制動器慣性臺架試驗方法 | Caravans and lights trailers; trailers of categories O<(Index)1> and O<(Index)2> with overrun brakes; inertia bench test methods for brakes |
| ISO 7643 | 旅居掛車和輕型掛車 帶有防撞擊主車的制動器的O1類和O2類掛車 制動控制器的線性臺架試驗法 | Caravans and light trailers; trailers of categories O<(Index)1> and O<(Index)2> with overrun brakes; linear bench test methods for brake controls |
| ISO 7646 | 商用車輛和公共汽車 齒輪箱法蘭 A型 | Commercial vehicles and buses; Gearbox flanges; Type A |
| ISO 7647 | 商用車輛和公共汽車 齒輪箱法蘭 S型 | Commercial vehicles and buses; Gearbox flanges; Type S |
| ISO 7650 AMD 1 | 商用車輛和公共汽車 1、2、3和4型起動電機的裝配尺寸 修改1 | Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4; Amendment 1 |
| ISO 7650 | 商用車輛和公共汽車 1、2、3和4型起動電機的裝配尺寸 | Commercial vehicles and buses; Mounting dimensions for starter motors of types 1, 2, 3 and 4 |
| ISO 7651 | 商用車輛和公共汽車 1、2、3型交流發電機安裝尺寸 | Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3 |
| ISO 7653 | 道路車輛 商用車輛 動力輸出裝置(PTO)和輔助傳動組件之間的聯結器 | Road vehicles; Commercial vehicles; Couplings between power take-offs (PTO) and ancillary driven units |
| ISO 7654 | 道路車輛 柴油發動機用旋裝式燃油濾清器 裝配和連接尺寸 | Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| ISO 7656 | 商用道路車輛 尺寸代碼 | Commercial road vehicles; dimensional codes |
| ISO 7707 | 商用道路車輛 后置式動力輸出裝置(PTO)的連接 | Commercial road vehicles; Connections for rear-mounted power take-offs (PTO) |
| ISO 7716 | 航空貨運設備 集裝單元裝置的運輸車輛(UTV) 功能要求 | Air cargo equipment; Unit load devices transport vehicle (UTV); Functional requirements |
| ISO 7717 | 航空器 四輪驅動牽引車 設計考慮的性能要求因素 | Aircraft; Four-wheel-drive tow tractors; Performance requirements factors for design |
| ISO 7718 | 飛機.主艙客艙門.與航空旅客橋或轉運車輛連接的接口要求 | Aircraft - Main-deck passenger doors - Interface requirements for connection with passenger-boarding bridge or transfer vehicle |
| ISO 7736 | 道路車輛 前端安裝的轎車無線電接收機 包括連接裝置的裝配空間 | Road vehicles; Car radio for front installation; Installation space including connections |
| ISO 7747 | 道路車輛 全流式潤滑油濾清器的濾芯 尺寸 | Road vehicles; Filter elements for full flow oil filters; Dimensions |
| ISO 7750-1 | 商業車輛 空氣濾清器濾芯尺寸 第1部分:A型和B型 | Commercial vehicles; dimensions of air filter elements; part 1: types A and B |
| ISO 7750-2 | 道路車輛 商用車輛用空氣濾清器濾芯 尺寸 第2部分:C型和D型 | Road vehicles; Air filter elements for commercial vehicles; Dimensions; Part 2 : Types C and D |
| ISO 7803 | 商用道路車輛 轉向球接頭 | Commercial road vehicles; Steering ball joints |
| ISO 7804 | 商用道路車輛 載貨車動力輸出裝置的側口 | Commercial road vehicles; Side openings for truck power take-offs |
| ISO 7859 | 輕便摩托車 燃料消耗測量 | Mopeds - Fuel consumption measurements |
| ISO 7862 | 道路車輛.通過模擬正面碰撞評價約束系統的滑車試驗過程 | Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions |
| ISO 7975 | 乘用車.轉向時制動.開環試驗法 | Passenger cars - Braking in a turn - Open-loop test method |
| ISO 7987 | 木工機械 木工車床 術語和驗收條件 | Woodworking machines; Turning lathes; Nomenclature and acceptance conditions |
| ISO 8002 | 機械振動 地面車輛 測量數據的報告方法 | Mechanical vibrations; Land vehicles; Method for reporting measured data |
| ISO 8016 | 農用機械 整體輪轂的車輪 | Machinery for agriculture; Wheels with integral hub |
| ISO 8035 | 超過3.5t的商用車輛和公共汽車 前牽引裝置 | Commercial road vehicles and buses over 3,5 t; front towing attachments |
| ISO 8052 | 輕便摩托車 直流閃光器 | Mopeds; direct current flasher units |
| ISO 8066-2 | 汽車空調器用橡膠和塑料軟管和軟管組件 規范 第2部分：制冷劑134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Part 2: Refrigerant 134a |
| ISO 8090 | 自行車 術語 兩種語言版 | Cycles; terminology |
| ISO 8092-1 | 道路車輛 車載電氣線束的連接 第1部分:單極聯接接頭 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections; dimensions and specific requirements |
| ISO 8092-2 | 道路車輛.車載電氣線束的聯結.第2部分:定義、試驗方法和一般性能要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements |
| ISO 8092-3 | 道路車輛 車載電氣線束的連接 第3部分:多極連接接頭 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections; dimensions and specific requirements |
| ISO 8092-4 | 道路車輛 車載電氣線束的連接 第4部分:單極和多極連接插頭 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 4: Pins for single- and multi-pole connections - Dimensions and specific requirements |
| ISO 8093 | 道路車輛 電子系統的故障診斷試驗 | Road vehicles; Diagnostic testing of electronic systems |
| ISO 8098 | 兒童自行車安全要求 | Safety requirements for bicycles for young children |
| ISO 8123 | 道路車輛 起動電機徑節小齒輪 | Road vehicles; diametral pitch starter motor pinions |
| ISO 8178-11 | 往復式內燃機.廢氣排放測量.第11部分:瞬態試驗條件下非道路車輛發動機排氣和顆粒廢物排放量現場測量 | Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| ISO 8218 | 道路車輛 前照燈近光光束水平調節裝置 | Road vehicles; levelling devices for headlamp dipped beam |
| ISO 8314 | 造船及海上結構物 千斤座和導向滑車座的眼板 | Shipbuilding and marine structures; Trunnion pieces for span bearings and lead block bearings |
| ISO 8349 | 道路車輛. 測量道路表面摩擦力 | Road vehicles - Measurement of road surface friction |
| ISO 8356 | 道路車輛 柴油機 22型螺旋擰入式噴油器 | Road vehicles; Diesel engines; Screw-in injector, type 22 |
| ISO 8379 AMD 1 | 越野叉車 穩定性試驗 修改1 | Rough terrain trucks - Stability tests; Amendment 1 |
| ISO 8379 | 越野叉車 穩定性試驗 | Rough terrain trucks - Stability tests |
| ISO 8470 DAM 1 | 道路車輛.帶平座和16mm六角體的M14×1.25火花塞及其缸頭蓋.第1次修改 | Road vehicles; M14 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housing; amendment 1 |
| ISO 8470 | 道路車輛.六角對邊16mm的M14×1.25平座火花塞及其氣缸蓋安裝孔 | Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| ISO 8488 | 自行車 自行車前叉上用于裝配前叉合件的螺紋 | Cycles; Screw threads used to assemble head fittings on bicycle forks |
| ISO 8518 | 車間空氣 鉛顆粒及鉛化合物的測定 火焰原子吸收光譜法 | Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method |
| ISO 8562 | 自行車 把芯螺楔的角度 | Cycles; stem wedge angle |
| ISO 8644 | 摩托車.輕質合金鋼輪.試驗方法 | Motorcycles - Light-alloy wheels - Test method |
| ISO 8645 | 輕便摩托車 輕合金輪 試驗方法 | Mopeds; light-alloy wheels; test method |
| ISO 8667 | 商用車輛和公共汽車 十字齒形齒輪箱法蘭 T型 | Commercial vehicles and buses; cross-tooth gearbox flanges; type T |
| ISO 8686-2 | 起重機.載荷和載荷組合的設計原則.第2部分:汽車起重機 | Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes |
| ISO 8705 | 機動腳踏兩用車.重心位置的測量方法 | Mopeds - Measurement method for location of centre of gravity |
| ISO 8706 | 二輪輕便摩托車 側支架和中間支架的停車穩定性 | Two-wheeled mopeds; parking stability of side- and centre-stands |
| ISO 8709 Technical Corrigendum 1 | 輕便摩托車 制動器和制動裝置 試驗和測量方法 技術勘誤1 | Mopeds - Brakes and braking devices - Tests and measurement methods; Technical Corrigendum 1 |
| ISO 8709 | 輕便摩托車 制動器和制動裝置 試驗和測量方法 | Mopeds - Brakes and braking devices - Tests and measurement methods |
| ISO 8710 | 摩托車 制動器和制動裝置 試驗及測量方法 | () |
| ISO 8713 | 電動道路車輛.詞匯 | Electric road vehicles - Vocabulary |
| ISO 8714 | 電動道路車輛.標準耗能和范圍.承用車和輕型商用車輛的試驗規程 | Electric road vehicles - Reference energy consumption and range - Test procedures for passenger cars and light commercial vehicles |
| ISO 8715 | 道路電氣車輛 道路運行特性 | Electric road vehicles - Road operating characteristics |
| ISO 8716 | 道路車輛 牽引銷 強度試驗 | Road vehicles - Fifth wheel kingpins - Strength test |
| ISO 8717 | 商用道路車輛 牽引連接器 強度試驗 | Commercial road vehicles - Fifth wheel couplings - Strength tests |
| ISO 8718 | 道路車輛 牽引桿牽引裝置和用于鉸接式牽引桿的掛鉤孔 強度試驗 | Road vehicles - Drawbar couplings and eyes for hinged drawbars - Strength tests |
| ISO 8720 | 乘用車 機械式千斤頂規范 | Passengers cars; specifications for mechanical jacks |
| ISO 8721 | 道路車輛 碰撞試驗測量技術 光學儀器設備 | Road vehicles; Measurement techniques in impact tests; Optical instrumentation |
| ISO 8755 | 商用道路車輛 40mm牽引掛鉤孔 互換性 | Commercial road vehicles - 40 mm drawbar eye - Interchangeability |
| ISO 8760 | 車間空氣 一氧化碳質量濃度的測定 帶直接指示的快速取樣用檢測管法 | Work-place air; determination of mass concentration of carbon monoxide; method using detector tubes for short-term sampling with direct indication |
| ISO 8761 | 車間空氣 二氧化氮質量濃度的測定 帶直接指示的快速取樣用檢測管法 | Work-place air; determination of mass concentration of nitrogen dioxide; method using detector tubes for short-term sampling with direct indication |
| ISO 8762 | 車間空氣 氯乙烯的測定 活性碳管/氣相色譜法 | Workplace air; determination of vinyl chloride; charcoal tube/gas chromatographic method |
| ISO 8789 | 摩托車輸送液化石油氣用橡膠軟管和軟管組件 規范 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| ISO 8818 | 旅游居住車 旅居掛車 12 V 直流超低壓電器設施 | Leisure accommodation vehicles; caravans; 12 V direct current extra low voltage electrical installations |
| ISO 8820-1 | 道路車輛.熔斷器.第1部分:定義和一般試驗要求 | Road vehicles - Fuse-links - Part 1: Definitions and general test requirements |
| ISO 8820-2 | 道路車輛.熔斷器.第2部分:用戶指南 | Road vehicles - Fuse-links - Part 2: User's guide |
| ISO 8820-3 | 道路車輛.熔斷體.第3部分:帶接頭的熔斷體(刀閘) | Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) |
| ISO 8820-4 | 道路車輛.熔斷器.第4部分:陰性接觸(類型A)、螺栓接觸(類型B) 及其試驗夾具熔斷器 | Road vehicles - Fuse links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures |
| ISO 8820-5 | 道路車輛.熔斷器.第5部分:SF 30和SF 51類型的帶軸向引線的熔斷器(帶狀熔斷器)和試驗裝置 | Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures |
| ISO 8820-6 | 道路車輛.熔斷器.第6部分:單螺栓連接熔斷器 | Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links |
| ISO 8820-7 | 道路車輛.熔斷器.第7部分:額定電壓為450V帶焊片(G型)的熔斷器 | Road vehicles - Fuse-links - Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V |
| ISO 8853 | 賽車駕駛員的安全帶 要求和測試方法 | Safety harnesses for competition drivers; requirements and test methods |
| ISO 8854 | 道路車輛 帶調節器的交流發電機 試驗方法和一般要求 | Road vehicles; alternators with regulators; test methods and general requirements |
| ISO 8855 ADD 1 | 道路車輛 車輛動力學和道路保持能力 詞匯 補充1 | Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary - Addendum 1 |
| ISO 8855 | 道路車輛 車輛動力學和道路保持能力 詞匯 兩種語言版 | Road vehicles; vehicle dynamics and road-holding ability; vocabulary |
| ISO 8936 | 休閑旅居車輛用遮篷.要求和試驗方法 | Awnings for leisure accommodation vehicles - Requirements and test methods |
| ISO 8956 | 整體式或非整體式車床用仿形裝置驗收條件 精度檢驗 | Acceptance conditions for copying attachments, integral or otherwise, for lathes; testing of the accuracy |
| ISO 9010 | 同步帶傳動 汽車用帶 | Synchronous belt drives - Automotive belts |
| ISO 9011 | 同步帶傳動 汽車用帶輪 | Synchronous belt drives - Automotive pulleys |
| ISO 9021 | 摩托車 操縱件 型式、位置和功能 | Motorcycles; Controls; Types, positions and functions |
| ISO 9043 | 輕便摩托車 慣性矩測量方法 | Mopeds; measurement method for moments of inertia |
| ISO 9089 | 海上結構物 移動式近海裝置 錨絞車 | Marine structures; mobile offshore units; anchor winches |
| ISO 9103 | 道路車輛 壓燃式發動機 23型螺紋擰入式噴油器 | Road vehicles; Compression-ignition engines; Screw-in injection nozzle holder, type 23 |
| ISO 9112 | 載重汽車和公共汽車輪胎 測量輪胎滾動周長的方法 承載新輪胎 | Truck and bus tyres; method of measuring tyre rolling circumference; loaded new tyres |
| ISO 9128 | 道路車輛.表示制動液類型的圖形符號 | Road vehicles - Graphical symbols to designate brake fluid types |
| ISO 9129 | 摩托車 慣性矩的測量方法 | Motorcycles; measurement methods for moments of inertia |
| ISO 9130 | 摩托車.重心位置的測量方法 | Motorcycles - Measurement method for location of centre of gravity |
| ISO 9131 | 三輪輕便摩托車和摩托車 尺寸 詞匯 | Three wheeled mopeds and motorcycles; dimensions; vocabulary |
| ISO 9132 | 二輪輕便摩托車和摩托車 質量 詞匯 | Three-wheeled mopeds and motorcycles; masses; vocabulary |
| ISO 9141 | 道路車輛 診斷系統 對數字信息交換的要求 | Road vehicles - Diagnostic systems - Requirements for interchange of digital information |
| ISO 9141-2 AMD 1 | 道路車輛 診斷系統 第2部分:交換數字信息的 CARB 要求 修改1 | Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information; Amendment 1 |
| ISO 9141-2 | 道路車輛 診斷系統 第2部分:交換數字信息的 CARB 要求 | Road vehicles; diagnostic systems; part 2: CARB requirements for interchange of digital information |
| ISO 9141-3 | 道路車輛 診斷系統 第3部分:車輛和OBDⅡ掃描工具之間通信的檢驗 | Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool |
| ISO 9158 | 道路車輛 無鉛汽油用管嘴 | Road vehicles; nozzle spouts for unleaded gasoline |
| ISO 9159 | 道路車輛 含鉛汽油和柴油用管嘴 | Road vehicles; nozzle spouts for leaded gasoline and diesel fuel |
| ISO 9258 | 乘用車 刮刷系統 刮水片長度 | Passenger cars; wiper systems; wiper blade length |
| ISO 9259 AMD 1 | 乘用車 風擋玻璃刮刷系統 刷臂與刮水片的連接 修改1 | Passenger cars - Windscreen wiper systems - Wiper arm-to-blade connections; Amendment 1 |
| ISO 9259 | 乘用車 風擋玻璃刮刷系統 刷臂與刮水片的連接 | Passenger cars; windscreen wiper systems; wiper arm-to-blade connections |
| ISO 9310 | 道路車輛 壓燃式(柴油)發動機的煙度測量 對快速路檢的概括 | Road vehicles; Smoke measurement of compression-ignition (diesel) engines; Survey of short in-service tests |
| ISO 9367-1 | 滾裝船上道路車輛捆綁和固定裝置 一般要求 第1部分:商用車輛和車輛列車(半掛車除外) | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 1: commercial vehicles and combinations of vehicles, semi-trailers excluded |
| ISO 9367-2 | 滾裝船上道路車輛捆綁和固定裝置 一般要求 第2部分:半掛車 | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships; general requirements; part 2: semi-trailers |
| ISO 938 | 手動托盤搬運車 基本尺寸 | Hand-operated stillage trucks; Principal dimensions |
| ISO 9457-1 | 道路車輛 米制起動電機小齒輪 第1部分:通常使用的小齒輪 | Road vehicles; metric starter motor pinions; part 1: currently used pinions |
| ISO 9457-2 | 道路車輛.米制起動電機小齒輪.第2部分:具有20度壓力角的小齒輪 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle |
| ISO 9458 | 乘用車 起動機的電氣連接 | Passenger cars; Starter motor electrical connections |
| ISO 9486 | 車間空氣 揮發性氯化烴的測定 活性碳管/溶劑解析/氣相色譜法 | Workplace air; determination of vaporous chlorinated hydrocarbons; charcoal tube/solvent desorption/gas chromatographic method |
| ISO 9487 | 車間空氣 揮發性芳香烴的測定 活性碳管/溶劑解析/氣相色譜法 | Workplace air; determination of vaporous aromatic hydrocarbons; charcoal tube/solvent desorption/gas chromatographic method |
| ISO 9534 | 道路車輛 燃油泵的電氣連接 | Road vehicles; fuel pump electric connections |
| ISO 9565 | 兩輪摩托車 側支架和中間支架的停車穩定性 | Two-wheeled motorcycles; parking stability of side- and centre-stands |
| ISO 9619 AMD 1 | 客車.擋風玻璃刮水系統.試驗方法.修改件1 | Passenger cars - Windscreen wiping systems - Test methods; Amendment 1 |
| ISO 9619 | 客車.擋風玻璃刮水系統.試驗方法 | Passenger cars; windscreen wiping systems; test method |
| ISO 9633 | 自行車鏈條 特性和試驗方法 | Cycle chains - Characteristics and test methods |
| ISO 9645 | 聲學 運動中的雙輪機動自行車發射噪聲的測量 工程法 | Acoustics; measurement of noise emitted by two-wheeled mopeds in motion; engineering method |
| ISO 9678 | 航空器 自行式飲用水運送車 | Aircraft; self-propelled potable-water vehicle |
| ISO 9704 | 乘用車 刮刷系統 軸端和臂孔 | Passenger cars; wiper systems; shaft ends and arm-holes |
| ISO 9785 | 船舶和海上技術.可行駛內燃機車輛的貨艙的通風.氣流總需量的理論計算 | Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required |
| ISO 9815 | 道路車輛.承用車和掛車列車.橫向穩定性試驗 | Road vehicles - Passenger-car and trailer combinations - Lateral stability test |
| ISO 9816 | 乘用車.車輛轉彎時的停車反作用力.開環試驗方法 | Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method |
| ISO 9817 | 乘用車 發動機冷卻系統 注水口上的帶限壓閥加水口蓋及其斜面座的尺寸 | Passenger cars; engine cooling systems; dimensions of pressure caps and their ramp seats on filler necks |
| ISO 9818 | 乘用車 發動機冷卻系統 帶限壓閥加水口蓋的試驗方法和標志 | Passenger cars; engine cooling systems; test methods and marking of pressure caps |
| ISO 9928-2 | 起重機.起重機操作手冊.第2部分:汽車起重機操作者 | Cranes - Crane driving manual - Part 2: Mobile crane operators |
| ISO 9981 | 帶傳動 汽車工業用帶輪和多楔帶 PK型尺寸 | Belt drives - Pulleys and V-ribbed belts for the automotive industry - PK profile: Dimensions |
| ISO 9987 | 摩托車 會車光束隨載荷變化的測量 | Motorcycles; measurement of variation of dipped beam inclination as a function of load |
| ISO/PAS 11154 | 道路車輛.車頂載物架 | Road vehicles - Roof load carriers |
| ISO/PAS 12158 | 道路車輛.制動系統.溫度的測量方法 | Road vehicles - Braking systems - Temperature mesuring methods |
| ISO/PAS 17684 | 交通信息和控制系統.車載導航系統.將ITS消息集轉換成ASB.1格式定義 | Transport information and control systems - In-vehicule navigation systems - ITS message set translator to ASN.1 format definitions |
| ISO/PAS 21308-1 | 道路車輛.底盤和車身制造商(BEP)之間的產品數據交換.第1部分:一般原則 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Part 1: General principles |
| ISO/PAS 22574 | 道路車輛.制動襯面摩擦材料.目視檢驗 | Road vehicles - Brake linings frictions materials - Visual inspection |
| ISO/PAS 26183 | 全球汽車工業的SASIG產品數據質量導則 | SASIG Product data quality guidelines for the global automotive industry |
| ISO/PAS 27145-1 | 道路車輛.實施全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求.第1部分:總說明和應用定義 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 1: General information and use case definition |
| ISO/PAS 27145-2 | 道路車輛.實施全球統一重型發動機認證規程(WWH-OBD)要求.第2部分:與普通排放相關的數據詞典 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 2: Common emissions-related data dictionary |
| ISO/PAS 27145-3 | 道路車輛.全球統一的重型發動機認證規程(WWH-OBD)要求的實施.第3部分:通用信息詞典 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 3: Common message dictionary |
| ISO/PAS 27145-4 | 道路車輛.實施全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求.第4部分:車輛和試驗設備間連接 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 4: Connection between vehicle and test equipment |
| ISO/TR 10305-1 | 道路車輛.電磁場強度測量設備的校正.第1部分:頻率大于0Hz的電磁場測量設備 | Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies 0 Hz |
| ISO/TR 10305-2 | 道路車輛.電磁場強度測量設備的校正.第2部分:9kHz-40GHz的電磁場傳感器和探針(不包括天線)的校正用IEEE標準 | Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz |
| ISO/TR 10314-1 | 工業自動化 車間生產 第1部分:標準參考模型和要求識別的方法論 | Industrial automation; shop floor production; part 1: reference model for standardization and a methodology for identification of requirements |
| ISO/TR 10314-2 | 工業自動化 車間生產 第2部分:標準參考模型和方法論的應用 | Industrial automation; shop floor production; part 2: application of the reference model for standardization and methodology |
| ISO/TR 10603 | 道路車輛 關于照明和光信號裝置的法規情況 | Road vehicles; legal situation concerning lighting and light-signalling devices |
| ISO/TR 10982 | 道路車輛 評估發生位移的車輛乘員與展開氣囊的相互影響的試驗程序 | Road vehicles - Test procedures for evaluation out-of-position vehicle occupant interactions with deploying air bags |
| ISO/TR 11842 | 道路車輛 各國照明裝置法定配光要求的比較 | Road vehicles - Comparison of statutory photometric requirements in various countries for lighting devices |
| ISO/TR 12155 | 商用車輛 倒車的障礙物探測裝置 要求及試驗 | Commercial vehicles - Obstacle detection device during reversing - Requirements and tests |
| ISO/TR 12343 | 道路車輛 電工技術圖示符號 | Road vehicles - Symbols for electrotechnical diagrams |
| ISO/TR 12349-1 | 道路車輛 約束系統試驗用假人 第1部分:成年假人 | Road vehicles - Dummies for restraint system testing - Part 1: Adult dummies |
| ISO/TR 12349-2 | 道路車輛 約束系統試驗用假人 第2部分:兒童假人 | Road vehicles - Dummies for restraint system testing - Part 2: Child dummies |
| ISO/TR 12350 | 道路車輛.評價側向碰撞中乘員保護的傷害風險曲線 | Road vehicles - Injury risk curves for evaluation of occupant protection in side impact |
| ISO/TR 12351 | 道路車輛 在碰撞試驗中頭部觸點和持續時間的測定 | Road vehicles - Determination of head contact and duration in impact tests |
| ISO/TR 13214 | 道路車輛 兒童約束系統 法規和標準的匯編 | Road vehicles - Child restraint systems - Compilation of regulations and standards |
| ISO/TR 13219 | 道路車輛 由于肩帶的負荷造成的與Ⅲ型假人的胸部變形相關聯的胸部傷害風險 | Road vehicles - Risk of thoracic injury associated with Hybrid III sternal deflection due to shoulder belt loading |
| ISO/TR 13487 | 道路車輛的制動 對平均滿發展減速度定義的考慮 | Braking of road vehicles - Considerations on the definition of mean fully developed deceleration |
| ISO/TR 1417 | 汽車 座椅安全帶固定點 | Automobiles; Anchorages for seat belts |
| ISO/TR 14645 | 道路車輛 評估兒童約束系統與展開氣囊相互作用的試驗規程 | Road vehicles - Test procedures for evaluating child restraint system interactions with deploying air bags |
| ISO/TR 14933 | 道路車輛 評價乘客對側面撞擊氣袋的反應用的試驗程序 | Road vehicles - Test procedures for evaluating occupant interactions with deploying side impact airbags |
| ISO/TR 15031-2 | 道路車輛.與排放相關的診斷用車輛和外部設備間的通信.第2部分:術語、定義、縮略語和縮語 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Terms, definitions, abbreviations and acronyms |
| ISO/TR 15409 | 道路車輛.火花塞的熱量額定值 | Road vehicles - Heat rating of spark plugs |
| ISO/TR 15497 | 道路車輛 車輛軟件開發指南 | Road vehicles - Development guidelines for vehicle based software |
| ISO/TR 15766 | 道路車輛 行人保護 行人腿部試驗裝置的生物仿真度評定目標 | Road vehicles - Pedestrian protection - Targets for the assessment of the biofidelity of the pedestrian-leg test devices |
| ISO/TR 16352 | 道路車輛.運輸信息和控制系統車上指示的人類工程學特性.警報系統 | Road vehicles - Ergonomic aspects of in-vehicle presentation for transport information and control systems - Warning systems |
| ISO/TR 19961 | 起重機.汽車起重機的安全規范 | Cranes - Safety code on mobile cranes |
| ISO/TR 4114 | 道路車輛 旅居車和輕型掛車 球形連接器的靜態載荷 | Road vehicles; Caravans and light trailers; Static load on ball couplings |
| ISO/TR 7861 | 道路車輛.評價乘客防正面沖擊用傷害風險曲線 | Road vehicles - Injury risk curves for evaluation of occupant protection in frontal impact |
| ISO/TR 7882 | 道路車輛 制動襯片 擋熱板裝置的熱傳導率測定 | Road vehicles; Brake linings; Determination of thermal conductivity by guarded hot-plate apparatus |
| ISO/TR 8357 | 道路車輛 為車輛識別代碼(VIN)系統和世界零部件制造廠商識別代碼(WPMZ)分配世界制造廠商識別碼(WMZ)的實施 | Road vehicles - Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicles identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes |
| ISO/TR 8725 | 道路車輛 一個周期正弦輸入的瞬態開環響應的試驗方法 | Road vehicles; transient open-loop response test method with one period of sinusoidal input |
| ISO/TR 8726 | 道路車輛 使用偽隨機轉向輸入的瞬態開環響應的試驗方法 | Road vehicles; transient open-loop response test method with pseudo-random steering input |
| ISO/TR 9511 | 道路車輛 駕駛員手控范圍 車內檢驗規程 | Road vehicles; driver hand-control reach; in-vehicle checking procedure |
| ISO/TR 9790 | 道路車輛 仿真人側面碰撞假人 評定假人生物仿真度的橫向碰撞反應要求 | Road vehicles - Anthropomorphic side impact dummy - Lateral impact response requirements to assess the biofidelity of the dummy |
| ISO/TR 9819 | 道路車輛 光信號裝置配光要求的法規比較表 | Road vehicles; comparison tables of regulations on photometric requirements of light signalling devices |
| ISO/TS 11155-1 | 道路車輛 乘員艙內空氣濾清器 第1部分:顆粒過濾試驗 | Road vehicles - Air filters for passenger compartments - Part 1: Test for particle filtration |
| ISO/TS 11155-2 | 道路車輛.乘員艙內空氣濾清器.第2部分:氣體過濾試驗 | Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration |
| ISO/TS 12104 | 道路車輛.變速器類型.助力換檔手動變速器和帶手動換檔模式的自動變速器 | Road vehicles - Gearshift patterns - Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode |
| ISO/TS 13499 | 道路車輛.沖擊試驗用多媒體數據交換格式 | Road vehicles - Multimedia data exchange format for impact tests |
| ISO/TS 14505-1 | 熱環境人類工效學.評估機動車內熱環境.第1部分:評估熱應力的原理和方法 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 1: Principles and methods for assessment of thermal stress |
| ISO/TS 15007-2 | 道路車輛 駕駛員對交通情況和控制系統的目視行為的測量 第2部分：設備和程序 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures |
| ISO/TS 16553 | 道路車輛.數據電纜.試驗方法和要求 | Road vehicles - Data cables - Test methods and requirements |
| ISO/TS 16949 | 質量管理體系.汽車生產和有關服務的部分組織應用ISO 9001-2000的特殊要求 | Quality management systems - Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
| ISO/TS 16951 | 道路車輛.交通信息和控制系統的人類工效學方面.提供給司機的車載信息的優先度測定規程 | Road vehicles - Ergonomic aspects of transport information and control systems (TICS) - Procedures for determining priority of on-board messages presented to drivers |
| ISO/TS 17261 Technical Corrigendum 1 | 智能運輸系統.自動車輛和設備識別.聯運貨物運輸體系和術語.技術勘誤1 | Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology; Technical Corrigendum 1 |
| ISO/TS 17261 | 智能運輸系統.自動車輛和設備識別.聯運貨物運輸體系和術語 | Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal good transport architecture and terminology |
| ISO/TS 17262 | 自動車輛和設備識別.貨物聯運.編號結構和數據結構 | Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures |
| ISO/TS 17263 | 自動車輛和設備識別.貨物聯運.系統參數 | Automatic vehicle and equipment identification - Intermodal goods transport - System parameters |
| ISO/TS 17573 | 道路運輸和運輸量遠程信息管理.電子收費(EFC).車輛相關的運輸服務的系統體系結構 | Road Transport and Traffic Telematics--Electronic Fee Collection (EFC)--Systems architecture for vehicle related transport services |
| ISO/TS 20119 | 道路車輛.中心管理量化的試驗方法.直線驅動離差矩陣的測定 | Road vehicles - Test methods for the quantification of on-centre handling - Determination of dispersion metrics for straight-line driving |
| ISO/TS 20825 | 道路車輛.拉桿連接件、拉桿眼、轉盤主銷、鉤連接件和環形眼.使用中的機械連接件的磨損極限值 | Road vehicles - Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes - Wear limits for in-use mechanical couplings |
| ISO/TS 21609 | 道路車輛.配件市場射頻傳輸設備安裝用EMC指南 | Road vehicles - EMC guidelines for installation of aftermarket radio frequency transmitting equipment |
| JIS D0108 | 汽車排放廢氣污染控制的相關術語匯編 | Glossary of terms relating to control of air pollutions from automobile emissions |
| JIS D0110 | 汽車裝備相關術語匯編 | Glossary of terms relating to equipments of automobiles |
| JIS D1019 | 汽車牽引力的試驗方法 | Traction test method of automobiles |
| JIS E4045 | 貨車.組裝后檢查的通用要求 | Freight cars -- General requirements for the inspection on completion of construction |
| 編號 | 中文名稱 | 英文名稱 |