微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1486-1 | 潤滑脂管嘴.第1部分:機械與車輛用潤滑脂管嘴和適配器 | Lubricating nipples - Lubricating nipples and adaptors for use on machinery and vehicles |
| BS 1692 | 起重滑車規范 | Specification for gin blocks |
| BS 1717 | 自行車和摩托車用鋼管規范 | Specification for steel tubes for cycle and motor cycle purposes |
| BS 1727 | 電瓶驅動的車輛用電機規范 | Specification for motors for battery operated vehicles |
| BS 1802 | 一般工程與汽車用鋼彈簧墊圈規范 | Specification for steel spring washers for general engineering and automobile purposes |
| BS 1877-10 | 家用床上用品.第10部分:童床、搖籃童車及類似家用物品規范 | Domestic bedding - Specification for mattresses and bumpers for children's cots, perambulators and similar domestic articles |
| BS 1983-5 | 機床與便攜式電動工具用卡盤規范.第5部分:車床工作狀態卡盤的安全操作實用規程 | Chucks for machine tools and portable power tools - Code of practice for the safe operation of workholding chucks used on lathes |
| BS 2634-1 | 表面粗糙度比對試樣.第1部分:車、磨、鏜、銑、成形和刨削試樣規范 | Roughness comparison specimens - Specification for turned, ground , bored, milled, shaped and planed specimens |
| BS 2718 | 氣瓶小推車規范 | Specification for gas cylinder trolleys |
| BS 2853 | 架空吊車道鋼梁的設計與試驗規范 | Specification for the design and testing of steel overhead runway beams |
| BS 3214 | 電瓶驅動車輛的保險連接器(額定電流 320安)規范 | Specification for locking connectors for battery operated vehicles (320 ampere rating) |
| BS 3237 | 礦山礦物運輸用輕型和中型車輛規范 | Specification for light and medium rolling stock for mineral haulage in mines |
| BS 3486-1 | 農用機械.第1部分:工具用輪子的規格:車輪輪輞固定尺寸規格 | Specification for wheels for agricultural machinery, implements and trailers - Specification for wheel-to-hub fixing dimensions |
| BS 3492 | 公路和鐵路運輸石油產品（包括航空燃油）油罐車軟管及軟管組件規范 | Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels |
| BS 3539 | 機動車噪音測量用聲級計規范 | Specification for sound level meters for the measurement of noise emitted by motor vehicles |
| BS 3710 | 機車及鐵路車輛制動軟管連接器規范 | Specification for brake hose couplings for locomotives and rolling stock |
| BS 3726 | 平衡重叉車.穩定性.基本試驗 | Specification for counterbalanced lift trucks - stability - basic tests |
| BS 3810-1 | 材料裝卸術語.第1部分:托盤貨車、托盤搬運車、手推運貨車和機動運貨車術語 | Glossary of terms used in materials handling - Terms used in connection with pallets, stillages, hand and powered trucks |
| BS 3818 | 柴油機車及有軌內燃機車自動密封加油接頭規范 | Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
| BS 4040 | 機動車輛用加鉛汽油規范 | Specification for leaded petrol (gasoline) for motor vehicles |
| BS 4068 | 儀器、敷料及麻醉師用醫院手推車(包括活角形手推車)規范 | Specification for hospital trolleys for instruments, dressings and for anaesthetists' use including angular trolleys |
| BS 4073 | 礦山礦物運輸用重型全部車輛規范 | Specification for heavy rolling stock for mineral haulage in mines |
| BS 4110 | 車輛駕駛員護目鏡規范 | Specification for visors for vehicle users |
| BS 4193-7 | 硬質合金刀具.可轉位刀片車削和仿形用單刃刀具夾.尺寸 | Hardmetal insert tooling - Single point tool holders for turning and copying for indexable inserts - Dimensions |
| BS 4322 | 醫院用車輛(如手推車)減震器推薦標準 | Recommendations for buffering on hospital vehicles such as trolleys |
| BS 4361-2.13 | 木工機械規范.第2部分:精度試驗.第13節:車床 | Specification for woodworking machines. Accuracy tests. Turning lathes |
| BS 4361-21 | 木工機械 第21部分:車床規范 | Woodworking machines - Specification for turning lathes |
| BS 4430-2 | 工業機動車輛安全性推薦標準.第2部分:操作和維護 | Recommendations for the safety of powered industrial trucks - Operation and maintenance |
| BS 4436 | 可前后移動叉車和跨式叉車規范.穩定性試驗 | Specification for reach and straddle fork lift trucks - stability tests |
| BS 4442-1 | 車床軸頭及面板規范.第1部分:A 式和卡姆洛克式 | Specification for lathe spindle noses and faceplates - Types 'A' and 'Camlock' |
| BS 4464 | 普通工程和汽車用彈簧墊圈規范.米制系列 | Specification for spring washers for general engineering and automobile purposes - Metric series |
| BS 4521-1.1 | 私營鐵路道岔規范.第1部分:英國鐵路機車運行道岔.第1節:工字鋼軌道岔 | Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using bull head rails |
| BS 4521-1.2 | 私營鐵路道岔規范.第1部分:英國鐵路機車運行道岔.第2節:平底鋼軌道岔 | Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using flat bottom rail |
| BS 4521-2 | 私營鐵路道岔規范.第2部分:英國鐵路機車不運行的、軸負荷不超過10噸的輕型平底鋼軌岔道 | Specification for railway turnouts for private users - Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails |
| BS 4521-3.1 | 私營鐵路道岔規范.第3部分:英國鐵路機車不運行的、軸負荷不超過25噸的中型道岔.第1節:工字鋼軌道岔 | Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using bull head rail |
| BS 4521-3.2 | 私營鐵路道岔規范.第3部分:英國鐵路機車不運行的、軸負荷不超過25噸的中型道岔.第2節:平底鋼軌道岔 | Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using flat bottom rails |
| BS 4521-4 | 私營鐵路道岔規范.第4部分:英國鐵路機車不運行的、軸負荷可超過25噸的重型平底鋼軌岔道 | Specification for railway turnouts for private users - Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails |
| BS 4639 | 牽引式農用車輛制動器和制動系統規范 | Specification for brakes and braking systems for towed agricultural vehicles |
| BS 4656-1 | 機床精度及試驗方法.第1部分:普通車床規范 | Accuracy of machine tools and methods of test - Specification for lathes, general purpose type |
| BS 4656-2 | 機床精度和試驗方法.第2部分:仿形車床和仿形附件規范 | Accuracy of machine tools and methods of test - Specification for copying lathes and copying attachments |
| BS 4656-22 | 機床精度及試驗方法.第22部分:立式單柱和雙柱鏜車床規范 | Accuracy of machine tools and methods of test - Specification for vertical boring and turning lathes, single and double column types |
| BS 4656-28 | 機床精度及試驗方法.第28部分:車削直徑小于1500mm(含)的數控車床規范 | Accuracy of machine tools and methods of test - Specification for numerically controlled turning machines up to and including 1500 mm turning diameter |
| BS 4656-29 | 機床精度及試驗方法.第29部分:多軸(分度回輪)自動車床規范 | Accuracy of machine tools and methods of test - Specification for automatic lathes, multi-spindle (indexing drum) type |
| BS 4656-35 | 機床精度及試驗方法.第35部分:加工直徑小于25mm的單軸滑枕轉塔自動車床規范 | Accuracy of machine tools and methods of test - Specification for capstan, turret and automatic lathes, single spindle type less than 25 mm diameter capacity |
| BS 4676 | 防護服裝.熔態金屬鑄造車間中使用的鞋靴和護腿.要求和試驗方法 | Protective clothing - Footwear and gaiters for use in molten metal foundries - Requirements and test methods |
| BS 4742-3 | 農用機械液壓設備.第3部分:掛車用單動傾卸伸縮筒尺寸和額定壓力規范 | Hydraulic equipment for agricultural machinery - Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers |
| BS 4742-4 | 農用機械液壓設備.第4部分:掛車和機具用制動系統用液壓管接頭規范 | Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment |
| BS 4742-5 | 農用機械液壓設備.第5部分:掛車和機具用制動氣缸尺寸規范 | Hydraulic equipment for agricultural machinery - Specification for dimensions of braking cylinders for trailers and trailed equipment |
| BS 4742-7 | 農用機械液壓設備.第7部分:農用拖掛車輛液壓制動系統管接頭用油口連接規范 | Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings |
| BS 4840-1 | 硬聚氨脂(PUR)泡沫塑料塊.第1部分:運輸集裝箱和絕緣運輸車身用聚氨脂(PUR)泡沫塑料規范 | Rigid polyurethane (PUR) foam in slab form - Specification for PUR foam for use in transport containers and insulated vehicle bodies |
| BS 4854 | 礦用載人車規范 | Specification for cars for manriding in mines |
| BS 4875-5 | 家具的強度和穩定性.家用和定做用桌子及小臺車的強度、耐用性和穩定性要求 | Strength and stability of furniture - Requirements for strength, durability and stability of tables and trolleys for domestic and contract use |
| BS 5402 | 病人手推車規范 | Specification for patient trolleys |
| BS 5409-2 | 尼龍管規范.第2部分:主要用于汽車工業的11型及12型增塑或未增塑尼龍管 | Specification for nylon tubing - Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry |
| BS 5482-2 | 家用丁烷-丙烷燃?xì)庋b置.旅居車與非永久性住宅中的裝置 | Domestic butane- and propane-gas-burning installations - Installations in caravans and non-permanent dwellings |
| BS 5502-80 | 農用建筑物與筑構物.第80部分:車間、維修和檢查設施的設計與施工慣例 | Buildings and structures for agriculture - Code of practice for design and construction of workshops, maintenance and inspection facilities |
| BS 5576 | 野營帳篷、遮陽篷、拖車篷及大篷車車篷的防火安全性規范 | Specification for fire safety features of camping tents, awnings , trailer tents and caravan awnings |
| BS 5639-1 | 叉車貨叉.第1部分:鉤接式叉桿術語 | Fork arms for fork lift trucks - Vocabulary for hook-on type fork arms |
| BS 5777 | 托盤碼垛機和高升程平臺貨車穩定性驗證試驗方法 | Methods of test for verification of stability of pallet stackers and high lift platform trucks |
| BS 5778 | 工業用帶前傾起重桿的碼垛貨車特殊條件下工作穩定性驗證試驗方法 | Methods of test for verification of stability of industrial trucks operating in special condition of stacking with mast tilted forward |
| BS 5832 | 裝有卸下壓實廢棄物箱的車輛規范 | Specification for compacted waste containers for lift-off vehicles |
| BS 5853 | 醫用小推車規范 | Specification for medicine trolleys |
| BS 5892-2 | 鐵路車輛材料.第2部分:鍛造和軋制輪體規范 | Railway rolling stock materials - Specification for forged and rolled wheel centres |
| BS 5892-3 | 鐵路車輛材料.第3部分:牽引車輛及被拖客貨車輛單個車輪規范 | Railway rolling stock materials - Specification for monobloc wheels for traction and trailing stock |
| BS 5892-4 | 鐵路車輛材料.第4部分:煅造和軋制輪箍規范 | Railway rolling stock materials - Specification for forged and rolled tyres |
| BS 5892-5 | 鐵路車輛材料(米制).第5部分:輪箍式車輪扣環用鋼棒規范 | Railway rolling stock material (metric) - Specification for steel bars for retaining rings for tyred wheels |
| BS 5892-6 | 鐵路車輛材料.第6部分:牽引車輛及被拖客貨車輛輪組規范 | Railway rolling stock materials - Specification for wheelsets for traction and trailing stock |
| BS 5915 | 礦車種放射性礦石礦井口檢定和分選規范 | Specification for equipment for minehead assay and sorting radioactive ores in containers |
| BS 5942-11 | 高保真度音響設備及系統最低性能要求.第11部分:車輛(如汽車)用高保真度系統規范:一般要求 | High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); general requirements |
| BS 5942-13 | 高保真度音響設備及系統最低性能要求.第13部分:車輛(如汽車)用高保真系統規范.調頻無線電調諧裝置 | High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); FM radio tuner units |
| BS 6086 | 汽車內噪聲的測量方法 | Method of measurement of noise inside motor vehicles |
| BS 6102-1 | 自行車.第1部分:安全性要求規范 | Cycles - Specification for safety requirements for bicycles |
| BS 6102-10 | 自行車.第10部分:車叉頂部裝配用螺紋規范 | Cycles - Specification for screw threads used to assemble head fittings on bicycle forks |
| BS 6102-11 | 自行車.第11部分:車把主管和彎管組裝尺寸規范 | Cycles - Specification for assembly dimensions for stem and handlebar bend |
| BS 6102-12 | 自行車.第12部分:車把主管楔角規范 | Cycles - Specification for stem wedge angle |
| BS 6102-13 | 自行車.第13部分:花鍵轂和后鏈輪配合尺寸規范 | Cycles - Specification for mating dimensions for splined hub and sprocket |
| BS 6102-14 | 自行車.第14部分:帶方頭配件的底托架軸和曲柄組件尺寸規范 | Cycles - Specification for dimensions of bottom bracket axle and crank assembly with square end fittings |
| BS 6102-15 | 自行車.第15部分:輻條螺紋接頭尺寸規范 | Cycles - Specification for dimensions of spoke nipples |
| BS 6102-16 | 自行車.第16部分:更新制動塊規范 | Cycles - Specification for replacement brake blocks |
| BS 6102-2 | 自行車.第2部分:反光裝置光學要求和物理要求規范 | Cycles - Specification for photometric and physical requirements of reflective devices |
| BS 6102-3 | 自行車.第3部分:照明玻璃光度和物理要求規范 | Cycles - Specification for photometric and physical requirements of lighting equipment |
| BS 6102-4 | 自行車.第4部分:術語 | Cycles - Glossary of terms |
| BS 6102-5 | 自行車.第5部分:車輪命名及尺寸規范 | Cycles - Specification for bicycle tyre designations and dimensions |
| BS 6102-6 | 自行車.第6部分:腳踏車車輞規范 | Cycles - Specification for bicycle rims |
| BS 6102-8 | 自行車.自行車輪轂裝配飛輪用螺紋規范 | Cycles - Specifications for screw threads used to assemble freewheels on bicycle hubs |
| BS 6102-9 | 自行車.第9部分:底托組件用螺紋規范 | Cycles - Specification for screw threads used in bottom bracket assemblies |
| BS 6109-2 | 車尾部升降機、移動式升降機和車載式升降斜梯.第2部分:載客升降機和斜梯慣例 | Tail lifts, mobile lifts and ramps associated with vehicles - Code of practice for passenger lifts and ramps |
| BS 6113 | 運土用傾卸車車體容積額定值確定方法 | Method for volumetric rating of dumper bodies used for earth-moving |
| BS 6384 | 農業和林業車輛制動性能的測定方法 | Methods for determination of braking performance of agricultural and forestry vehicles |
| BS 6571-1 | 停車場控制設備.第1部分:投幣式停車計時表規范 | Vehicle parking control equipment - Specification for coin operated clockwork parking meters |
| BS 6571-2 | 停車場控制設備.第2部分:電動停車計時器規范 | Vehicle parking control equipment - Specification for electrically powered parking meters |
| BS 6571-4 | 停車場控制設備.第4部分:隔層型停車場控制設備規范 | Vehicle parking control equipment - Specification for barrier type parking control equipment |
| BS 6571-6 | 停車場控制設備.第6部分:停車開始付費控制設備規范 | Vehicle parking control equipment - Specification for pay-on-foot parking control equipment |
| BS 6571-7 | 停車場控制設備.第6部分:停車牌規范 | Vehicle parking control equipment - Specification for parking discs |
| BS 6571-8 | 停車控制設備.預購?fù)＼噾{單規范 | Vehicle parking control equipment - Specification for pre-purchased parking vouchers |
| BS 6586-1 | 采用壓注法制作的聚氨酯硬泡沫塑料.第1部分:運輸集裝箱和車身用隔離板的聚氨酯硬泡沫塑料規范 | Rigid polyurethane (PUR) foam produced by the press injection method - Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies |
| BS 6658 | 車輛司機用安全頭盔規范 | Specification for protective helmets for vehicle users |
| BS 6684 | 嬰兒在嬰兒車、折疊式小推車、高腳椅或步行時使用的保護安全帶(包括可拆卸式學步安全帶)規范. | Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking |
| BS 6762-2 | 休閑娛樂車輛和可移動娛樂車輛用裝置的使用.第2部分:公園療養院和可移動娛樂車輛固態燃料采暖安裝實用規程 | Services for leisure accommodation vehicles and transportable accommodation units - Code of practice for the installation of solid fuel fired heating in park homes and transportable accommodation units |
| BS 6765-4 | 休閑式房車.大篷車.第4部分:下部齒輪規范 | Leisure accommodation vehicles - Caravans - Specification for undergear |
| BS 6770 | 旅游居住車（活動居住車）、度假篷車和活動居住裝置的外部顏色指南 | Guide for exterior colours for park homes (mobile homes), holiday caravans and transportable accommodation units |
| BS 6794 | 陸地車輛測量的振動數據報告方法 | Method for reporting measured vibration data for land vehicles |
| BS 6853 | 客運列車的設計和建造中的防火措施實施規程 | Code of practice for fire precautions in the design and construction of passenger carrying trains |
| BS 6873 | 自行車用白熾燈規范 | Specification for filament lamps for cycles |
| BS 6911-9 | 運土機械試驗.第9部分:翻斗車和拖拉機刮板的減速器性能驗證 | Testing earth-moving machinery - Verification of retarder capability of dumpers and tractor-scrapers |
| BS 6912-16 | 運土機械的安全性.翻斗車身支架和司機室翻轉支架裝置規范 | Safety of earth-moving machinery - Specification for dumper body support and operator's cab tilt support devices |
| BS 6912-8 | 運土機械安全性.第8部分:鉸接式車架鎖緊裝置的性能要求規范 | Safety of earth-moving machinery - Specification for performance requirements of an articulated frame locking device |
| BS 7121-12 | 起重機安全操作實施規程.救援服務車和設備.實施規程 | Code of practice for safe use of cranes - Recovery vehicles and equipment - Code of practice |
| BS 7121-4 | 起重機安全使用實用規程.卡車式裝載機 | Code of practice for safe use of cranes - Lorry loaders |
| BS 7122 | 液化氣體道路運輸用的焊接鋼槽車規范 | Specification for welded steel tanks for the road transport of liquefiable gases |
| BS 7346-7 | 煙和熱控制系統部件.有頂棚停車場煙和熱控制系統的功能建議和計算方法的實施規程 | Components for smoke and heat control systems - Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks |
| BS 7376 | 工作臺或手推車結構中使用的玻璃.規范 | Inclusion of glass in the construction of tables and trolleys - Specification |
| BS 7407 | 直接用燃料能源驅動的兒童運送車輛規范 | Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children |
| BS 7464 | 近海移動式裝置的起錨絞車規范 | Specification for anchor winches for mobile offshore units |
| BS 7471 | 停泊絞車規范 | Specification for mooring winches |
| BS 7533-10 | 用粘土、天然石或混凝土鋪筑材料建造的路面.用天然石料建造的行車路面的結構設計指南 | Pavements constructed with clay, natural stone or concrete pavers - Guide for the structural design of trafficked pavements constructed of natural stone setts |
| BS 7615 | 摩托車鏈規范 | Specification for motor cycle chains |
| BS 7669-3 | 車輛阻尼系統.安全護欄的安裝、檢驗和維修指南 | Vehicle restraint systems - Guide to the installation, inspection and repair of safety fences |
| BS 7800 | 機動車燃料.高辛烷值無鉛汽油(超級).規范 | Automotive fuel - High octane (super) unleaded petrol - Specification |
| BS 7901 | 回收運載工具和車輛回收設備規范 | Specification for recovery vehicles and vehicle recovery equipment |
| BS 7961 | 掛車耦合點的靜態垂直質量(牽引桿施加于牽引車的垂直載荷)測量設備規范 | Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle |
| BS 7980 | 車輛舉升機.安裝、維護、完全檢驗及安全操作.實施規程 | Vehicle lifts - Installation, maintenance, thorough examination and safe use - Code of practice |
| BS 811 | 自行車(B.S.C.)螺紋規范(過去稱為C.E.I.螺紋) | Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads) |
| BS AU 114b | 大篷車和輕型拖車用牽引托架和聯軸節鋼球的強度要求規范 | Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers |
| BS AU 138b | 牽引車輛、掛車和半掛車氣動制動系統.“接觸”式連接器 | Towing vehicle, trailer and semi-trailer pneumatic braking systems - "Contact" type couplings |
| BS AU 141a | 道路車輛用柴油機性能規范 | Specification for the performance of diesel engines for road vehicles |
| BS AU 144f | 翻新汽車和商用車輛輪胎規范 | Specification for retreaded car and commercial vehicle tyres |
| BS AU 145d | 向后反光的汽車號碼牌規范 | Specification for retroreflecting number plates |
| BS AU 146b | 載重量不超過7.25噸的半掛車的標準自動滾柱式聯軸節規范 | Specification for standard automatic roller-type coupling for semi-trailers not exceeding 71/4 tons laden weight |
| BS AU 149a | 牽引車與掛車之間的6V或12V電氣設備的電氣連接件規范:12N型(普通) | Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal) |
| BS AU 152 | 車輛尾端標記牌規范 | Specification for rear marking plates for vehicles |
| BS AU 156 | 汽車前燈與輔助燈射向?qū)?zhǔn)推薦標準 | Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles |
| BS AU 159f | 用于公共高速公路機動車輪胎的檢修規范 | Specification for repairs to tyres for motor vehicles used on the public highway |
| BS AU 163a | 道路車輛用氣壓制動設備壓力試驗連接規范 | Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles |
| BS AU 164 | 道路車輛碰撞試驗的沖擊速度測量規范 | Specification for measurement of impact velocity in collision tests on road vehicles |
| BS AU 169a | 農業用和林業用道路車輛、拖拉機和機械的內部裝飾材料燃燒性能的測定方法 | Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry |
| BS AU 175-1b | 車輛識別號碼(VIN).第1b部分:要點與結構 | Vehicle identification numbers (VIN) - Specification for content and structure |
| BS AU 175-2b | 車輛識別號碼(VIN).第2b部分:世界制造商識別號碼(WMI)法規規范 | Vehicle identification numbers (VIN) - Specification for world manufacturer identifier (WMI) codes |
| BS AU 175-3b | 車輛識別號碼(VIN).第3b部分:定位和附件規范 | Vehicle identification numbers (VIN) - Specification for location and attachment |
| BS AU 175-4 | 車輛識別號碼.可視式車輛識別號碼規范 | Vehicle identification numbers (VIN) - Specification for a visible vehicle identification number |
| BS AU 175-4a | 車輛識別號碼(VIN).可視車輛識別號碼規范 | Vehicle identification numbers (VIN) - Specification for a visible vehicle identification number |
| BS AU 177a | 帶6V或12V電壓的電氣設備的牽引車和掛車之間電氣連接器規范:12S型(補充) | Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary) |
| BS AU 178a | 道路車輛用安全防碎玻璃規范 | Specification for road vehicle safety glass |
| BS AU 181 | 可拆卸車體系統界面尺寸規范 | Specification for interface dimensions for demountable vehicle body systems |
| BS AU 184 | 世界各地道路車輛制造商的標識符號(WMPI)規范 | Specification for world parts manufacturer identifier code (WPMI) for road vehicles |
| BS AU 187 | 牽引乘用車和輕型運貨車用牽引繩索組件 | Tow rope assemblies for towing passenger cars and light vans |
| BS AU 188 | 道路車輛用牽引繩、纜、桿的固定規范 | Specification for anchorages for towing ropes, cables or bars for road vehicles |
| BS AU 190 | 拖載達2000kg的掛車三角形拉桿上超限裝置安裝面尺寸和固定螺栓規范 | Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg |
| BS AU 192 | 大篷車質量與尺寸術語詞匯 | Glossary of terms for masses and dimensions of caravans |
| BS AU 193a | 摩托車和輕型摩托車排氣系統更換規范 | Specification for replacement motor cycle and moped exhaust systems |
| BS AU 194 | 牽引車和掛車之間電氣連接件性能規范 | Specification for performance of electrical connections between towing vehicles and trailers |
| BS AU 196 | 24V掛車防鎖制動系統和牽引車之間電氣連接件規范 | Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles |
| BS AU 197 | 牽引車和帶有24V電氣設備掛車之間的電氣連接件規范:24N型(普通) | Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal) |
| BS AU 198 | 牽引車和帶有24V電氣設備掛車之間的電氣連接件規范:24S型(補充) | Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary) |
| BS AU 199a | 乘用車手控裝置、指示器和信號燈位置規范 | Specification for location of hand controls, indicators and tell-tales in passenger cars |
| BS AU 1c | 半掛車第五輪大號銷釘"50"尺寸規范 | Specification for dimensions of '50' fifth wheel king pin for semi-trailers |
| BS AU 200-1a | 載重貨車用減少噴濺裝置.第1a部分:密封裝置的設計規范 | Spray reducing devices for heavy goods vehicles - Specification for design of containment devices |
| BS AU 200-2a | 載重貨車用減少噴濺裝置.第2a部分:滅火材料及設備和空氣/水分離材料及及設備性能規范 | Spray reducing devices for heavy goods vehicles - Specification for performance of suppression material and devices, and air/water separating material and devices |
| BS AU 201-2 | 繼電器和閃光燈.第2部分:道路車輛繼電器終端配置與功能屬性規范 | Relays and flashers - Specification for arrangement and functional attribution of relay terminals for road vehicles |
| BS AU 203a | 商用道路車輛的動力輸出裝置和輔助驅動裝置之間聯接器尺寸規范 | Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles |
| BS AU 205 | 道路車輛靜態轉彎角度性能制動效應試驗方法 | Method of test for effect of braking on steady state cornering behaviour of road vehicles |
| BS AU 206-1 | 道路車輛診斷系統.第1部分:術語詞匯 | Diagnostic systems for road vehicles - Glossary |
| BS AU 206-2 | 道路車輛診斷系統.第2部分:診斷測試器圖形符號規范 | Diagnostic systems for road vehicles - Specification for graphical symbols for diagnostic testers |
| BS AU 206-3 | 道路車輛診斷系統.第3部分:試驗點火系統的一般要求規范 | Diagnostic systems for road vehicles - Specification for general requirements for testing ignition systems |
| BS AU 206-4 | 道路車輛診斷系統.第4部分:試驗電子系統的一般要求規范 | Diagnostic systems for road vehicles - Specification for general requirements for testing electronic systems |
| BS AU 207 | 汽車收音機安裝空間尺寸規范 | Specification for dimensions of car radio installation space |
| BS AU 209-0 | 車輛安全性.車輛安全設備/系統應用指南 | Vehicle security - Guide to the application of security devices/systems to vehicles |
| BS AU 209-1a | 車輛安全性.乘用車和改型車鎖緊系統規范 | Vehicle security - Specification for locking systems for passenger cars and car derived vehicles |
| BS AU 209-2 | 車輛安全性.車內娛樂和通訊設備防盜安全系統規范 | Vehicle security - Specification for security systems against theft of in-car equipment for entertainment and communication purposes |
| BS AU 209-3 | 車輛安全性.第3部分:乘用車和改型車玻璃安裝用安全標記規范 | Vehicle security - Specification for security marking of glazing for passenger cars and car derived vehicles |
| BS AU 209-4a | 車輛安全性.乘用車和改型車輛用玻璃安裝安全性規范 | Vehicle security - Specification for security glazing for passenger cars and car derived vehicles |
| BS AU 209-5b | 車輛安全性.乘用車和改型汽車中心動力鎖死系統規范 | Vehicle security - Specification for central power locking systems for passenger cars and car derived vehicles |
| BS AU 209-6a | 車輛安全性.乘用車和改型汽車鎖死系統規范 | Vehicle security - Specification for dead locking systems for passenger cars and car derived vehicles |
| BS AU 209-7 | 車輛安全性.第7部分:貨車駕駛室的鎖定系統規范 | Vehicle security - Specification for locking systems for goods vehicle driver's compartments |
| BS AU 209-8 | 車輛安全性.貨車貨艙鎖緊系統規范 | Vehicle security - Specification for locking systems for goods vehicle load compartments |
| BS AU 210-1 | 大篷車和輕型掛車用掛鉤.第1部分:鋼掛鉤機械強度的計算方法 | Drawbars for caravans and light trailers - Method of calculation for the mechanical strength of steel drawbars |
| BS AU 210-2 | 大篷車和輕型掛車用拉桿.第2部分:鋁拉桿和底盤設計規范 | Drawbars for caravans and light trailers - Specification for the design of aluminium drawbars and chassis |
| BS AU 211 | 商用車輛和公共汽車齒輪傳動空氣壓縮機四孔法蘭尺寸規范 | Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses |
| BS AU 214-2 | 變速箱法蘭.第2部分:商用車輛和公共汽車A型齒輪箱法蘭尺寸規范 | Gearbox flanges - Specification for dimensions for type A gearbox flanges for commercial vehicles and buses |
| BS AU 214-3 | 變速箱法蘭.第3部分:商用車輛和公共汽車S型齒輪箱法蘭尺寸規范 | Gearbox flanges - Specification for dimensions for type S gearbox flanges for commercial vehicles and buses |
| BS AU 214a-1 | 變速箱法蘭.第1部分:T形、商用車輛和公共汽車用T型正交齒齒輪變速箱法蘭的尺寸規范 | Gearbox flanges - Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses |
| BS AU 215-1 | 動力輸出裝置.第1部分:商用道路車輛外廓尺寸規范 | Power take offs (PTOs) - Specification for dimensions for clearance envelope for commercial road vehicles |
| BS AU 215-2 | 動力輸出裝置.第2部分:商用道路車輛側面開口尺寸規范 | Power take offs (PTOs) - Specification for dimensions of side openings for commercial road vehicles |
| BS AU 215-3 | 動力輸出裝置.第3部分:商用道路車輛安裝在尾部的功率輸出裝置的連接件尺寸規范 | Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles |
| BS AU 216-1 | 道路車輛用石油基制動液的液壓制動系統.第1部分:石油基基準液規范 | Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid |
| BS AU 217-1a | 機動車輛用最大道路行駛速度限制器.第1a部分:安裝要求規范 | Maximum road speed limiters for motor vehicles - Specification for installed requirements |
| BS AU 217-2 | 機動車輛用最大公路行駛限速器.第2部分:系統和部件要求規范 | Maximum road speed limiters for motor vehicles - Specification for system and component requirements |
| BS AU 223a | 制作汽車和輕型面包車承重架的設計和結構性能.規范 | Design, construction performance and marking of vehicle support stands for cars and light vans - Specification |
| BS AU 224b | 汽車和輕型面包車用便攜式車輪坡道規范 | Specification for portable wheel ramps for cars and light vans |
| BS AU 225 | 商用道路車輛轉向球形接合件尺寸規范 | Specification for dimensions of steering ball joints for commercial road vehicles |
| BS AU 227 | 商用車輛和公共汽車交流發電機圓軸端頭和輪轂尺寸規范 | Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses |
| BS AU 228-1b | 道路車輛沖擊試驗.第1部分:測量技術和一般儀器規范 | Impact tests on road vehicles - Specification for measurement techniques and general instrumentation |
| BS AU 228-2 | 道路車輛碰撞試驗.第2部分:使用光學儀器的測量技術規范 | Impact tests on road vehicles - Specification for measurement techniques using optical instrumentation |
| BS AU 232 | 裝有調節器的道路車輛交流發電機的試驗和一般要求方法 | Methods of test and general requirements for road vehicle alternators with regulators |
| BS AU 233 | 乘用車起動電動機電氣連接件規范 | Specification for starter motor electrical connections for passenger cars |
| BS AU 234 | 道路車輛起動電動機一般要求試驗方法 | Methods of test and general requirements for road vehicle starter motors |
| BS AU 235-1 | 商用車輛第五輪耦合裝置.第1部分:試驗條件和強度要求規范 | Fifth wheel couplings for commercial vehicles - Specification for test conditions and strength requirements |
| BS AU 236 | 道路車輛圓形電子轉速表 | Specification for circular electronic tachographs for road vehicles |
| BS AU 237a | 汽車啟動用輕型家用跨接線引線裝置規范 | Specification for light domestic duty jumper lead sets for automotive starting |
| BS AU 238 | 道路車輛照明及燈光信號裝置術語詞匯 | Glossary of terms for road vehicle lighting and light signalling devices |
| BS AU 242a | 汽車擋風玻璃檢修.實用規程 | Automotive windscreen repair - Code of practice |
| BS AU 244 | 車輛動力學和道路定位能力的術語詞匯 | Glossary of terms for road vehicle dynamics and road holding ability |
| BS AU 245 | 3.5噸以上的商用車輛和公共汽車前牽引附件規范 | Specification for front towing attachments for commercial road vehicles and buses over 3.5 t |
| BS AU 246 | 雙軸道路車輛重心測定方法 | Method for determination of the centre of gravity of road vehicles with two axles |
| BS AU 24a | 總重量達5000kg掛車的牽引連接規范 | Specification for towing connections for trailers up to 5000 kg gross mass |
| BS AU 25 | 總重5-14噸的掛車和牽引車的牽引鉤規范 | Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle |
| BS AU 250 | 商業車輛和公共汽車1、2和3 型交流發電機安裝尺寸規范 | Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses |
| BS AU 251 | 汽車疊層擋風玻璃檢修器具的操作規范 | Specification for performance of automotive laminated windscreen repair systems |
| BS AU 252 | 道路車輛用經節起動器電動機小齒輪規范 | Specification for diametral pitch starter motor pinions for road vehicles |
| BS AU 255-1 | 道路車輛非屏蔽低壓電纜.厚壁絕緣電纜的導線大小和尺寸規范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables |
| BS AU 255-2 | 道路車輛非屏蔽低壓電纜.薄壁絕緣電欖的導線大小及尺寸規范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables |
| BS AU 259 | 商用車輛和公共汽車用部件規范.T型嚙合傳動軸法蘭 | Specification for components for commercial vehicles and buses - Cross-tooth propeller shaft flanges, type T |
| BS AU 26 | 總重5-16噸的掛車和牽引車的牽引爪規范 | Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle |
| BS AU 262-1 | 道路車輛.帶有圓錐形底座的護套型熱線點火塞及其汽缸蓋外殼.M14x1.25熱線點火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs |
| BS AU 262-2 | 道路車輛.帶有圓錐形底座的護套型熱線點火塞及其汽缸蓋外殼.M12x1.25熱線點火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs |
| BS AU 263 | 道路車輛.帶有圓錐形底座的M14x1.25壓實火花塞及其汽缸蓋外殼 | Road vehicles - M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing |
| BS AU 264 | 道路車輛.帶有圓錐形底座的M18x1.5火花塞及其汽缸蓋外殼 | Road vehicles - M18 X 1,5 spark-plugs with conical seating and their cylinder head housing |
| BS AU 265-2 | 道路車輛.點火系統.電子性能和功能的測試方法 | Road vehicles - Ignition systems - Electrical performance and function test methods |
| BS AU 268 | 小客車和輕型廂式貨車.商用牽引桿組件.規范 | Passenger cars and light vans - Commercial towing pole assemblies - Specification |
| BS AU 27 | 總重5-35噸掛車和牽引車的牽引鉤規范 | Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle |
| BS AU 28 | 總重5-35噸的掛車和牽引車的牽引爪規范 | Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle |
| BS AU 29 | 總重5-35噸的掛車和牽引車連接用牽引桿眼及前導輪架銷規范 | Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle |
| BS AU 2a | 超重型半掛車用直徑為3.5 - 4.5的第五輪大號銷釘尺寸規范 | Specification for dimensions of 31/2 - 41/2 in diameter fifth wheel king pin for use with extra heavy duty semi-trailers |
| BS AU 3 | 拖拉機和半掛車的間隙尺寸和牽引座的位置規范 | Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers |
| BS AU 30b | 裝載重量為7至14.25噸的半掛車用的標準自動滾柱式連接器規范 | Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 143/4 tons laden weight |
| BS AU 40-4a | 機動車輛照明及信號設備規范.第4a部分:密封式光束前照燈 | Specification for motor vehicle lighting and signalling equipment - Sealed beam headlamps |
| BS AU 50-1.0d | 輪胎和車輪.輪胎.綜述 | Tyres and wheels - Tyres - General |
| BS AU 50-1.1.2 | 輪胎和輪子.輪胎.汽車輪胎.滾動圓周測量法.加載的新輪胎 | Tyres and wheels - Tyres - Car tyres - Methods for measuring rolling circumference - Loaded new tyres |
| BS AU 50-1.1.3 | 輪胎和車輪.輪胎.汽車輪胎.滾動阻力測量法 | Tyres and wheels - Tyres - Car tyres - Method of measuring rolling resistance |
| BS AU 50-1.1.4b | 輪胎和輪子.輪胎.汽車輪胎.輪胎性能檢驗的試驗方法 | Tyres and wheels - Tyres - Car tyres - Method of test for verifying tyre capabilities |
| BS AU 50-1.2.1b | 輪胎和輪子.輪胎.商用汽車輪胎.輪胎 | Tyres and wheels - Tyres - Commercial vehicle tyres - Tyres |
| BS AU 50-1.2.2 | 輪胎和車輪.商用車輛輪胎.輪胎滾動周長的測量方法.負載型新輪胎 | Tyres and wheels - Tyres - Commercial vehicle tyres - Method of measuring tyre rolling circumference - Loaded new tyres |
| BS AU 50-1.2.3 | 輪胎和車輪.第1部分:輪胎.第2節:商業車輪胎.第3小節:滾動阻力測量法 | Tyres and wheels - Tyres - Commercial vehicle tyres - Method of measuring rolling resistance |
| BS AU 50-1.2.4 | 輪胎和車輪.第1部分:輪胎.第2節:商用車輛輪胎.第4小節:驗證輪胎性能的試驗方法 | Tyres and wheels - Tyres - Commercial vehicle tyres - Method of test for verifying tyre capabilities |
| BS AU 50-1.3.3 | 輪胎和車輪規范.輪胎.越野輪胎.移動式吊車和類似專用機械輪胎規范 | Specification for tyres and wheels - Tyres - Off-the-road tyres - Specification for tyres for mobile cranes and similar specialized machines |
| BS AU 50-1.4.3a | 輪胎和車輪.第1部分:輪胎.第4節:農用拖拉機和機械輪胎.第3a小節:層片額定標記系列輪胎的分類代碼和術語規范 | Tyres and wheels - Tyres - Agricultural tractor and machine tyres - Specification for classification codes and nomenclature for ply rating marked series tyres |
| BS AU 50-1.4.8 | 輪胎和車輪.農用拖拉機和機械的輪胎.農用拖拉機驅動輪滾動周邊的測量方法 | Tyres and wheels - Tyres - Agricultural tractor and machine tyres - Method of measuring tyre rolling circumference for agricultural tractor drive wheels |
| BS AU 50-1.5.1 | 輪胎和車輪.第1部分:輪胎.第5節:工業用車輛輪胎.第1小節:代碼指定系列輪胎規范 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for code-designated series tyres |
| BS AU 50-1.5.3 | 輪胎和車輪.輪胎.工業用車輛輪胎.5級錐度或平底輪輞充氣輪胎(公制系列)規范:負載額定值 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for pneumatic tyres (metric series) on 5 ° tapered or flat base rims: load ratings |
| BS AU 50-1.5.4a | 輪胎和輪子.輪胎.工業車輛輪胎.充氣輪胎輪輞用實心輪胎(米制系列)規范:命名、尺寸和標記 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for solid tyres (metric series) for pneumatic tyre rims: designation , dimensions and marking |
| BS AU 50-1.5.5 | 輪胎和輪子.輪胎.工業車輛輪胎.充氣輪胎輪輞用實心輪胎(公制系列)規范.額定負載 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for solid tyres (metric series) for pneumatic tyre rims - Load ratings |
| BS AU 50-1.5.6 | 輪胎和車輪.第1部分:輪胎.第5節:工業用車輛輪胎.第6小節:圓柱形和圓錐形底基橡膠實心輪胎(公制系列)、牌號 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for cylindrical and conical base rubber solid tyres (metric series), designation, dimensions and marking |
| BS AU 50-1.6.3a | 輪胎和車輪.輪胎.摩托車輪胎.代碼指定系列(直徑代碼為4～12)輪胎的標記、尺寸和載荷額定值規范 | Tyres and wheels - Tyres - Motorcycle tyres - Specifications for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres |
| BS AU 50-1.6.6a | 輪胎和輪子.輪胎.摩托車輪胎.檢驗輪胎性能的試驗方法 | Tyres and wheels. Tyres. Motorcycle tyres. Method of test for verifying tyre capabilities |
| BS AU 50-1.6.7 | 輪胎和輪子.輪胎.摩托車輪胎.滾動阻力測量試驗方法 | Tyres and wheels - Tyres - Motorcycle tyres - Method of test for measuring rolling resistance |
| BS AU 50-1.6.8 | 輪胎和輪子.輪胎.摩托車輪胎.在負載條件下新輪胎的輪胎滾動圓周的測量方法 | Tyres and wheels - Tyres - Motorcycle tyres - Method of measuring tyre rolling circumference for new tyres under loaded conditions - Section 6: Motorcycle tyres Subsection 6.8: Method for measuring tyre rolling circumference for new tyres under loaded conditions |
| BS AU 50-1.7.1 | 輪胎和車輪.第1部分:輪胎.第7節:機動自行車輪胎.第1小節:輪胎牌號、尺寸和載重額定規范 | Tyres and wheels - Tyres - Moped tyres - Specification for tyre designations, dimensions and load ratings |
| BS AU 50-1.8 | 輪胎和車輪.第1部分:輪胎.第8節:輪胎、內胎和墊帶保存實用規程 | Tyres and wheels - Tyres - Code of practice for the storage of tyres, inner tubes and flaps |
| BS AU 50-2.2a | 輪胎和車輪.第2部分:車輪及輪輞.第2a節:商用車輛輪轂和輪轂中心尺寸規范 | Tyres and wheels - Wheels and rims - Specification for dimensions of wheel naves and hub centres for commercial vehicles |
| BS AU 50-2.3 | 輪胎和車輪.第2部分:車輪和輪輞.第3節:商用車輛的道路車輪螺母、雙頭螺栓和螺栓規范 | Tyres and wheels - Wheels and rims - Specification for road-wheel nuts, studs and bolts for commercial vehicles |
| BS AU 50-2.5c | 輪胎和車輪.車輪和輪輞.乘用車全部用或部分用輕鑄合金制造的道路車輪規范 | Tyres and wheels - Wheels and rims - Specification for road wheels manufactured wholly or partly of cast light alloy for passenger cars |
| BS AU 50-2.6a | 輪胎和車輪.第2部分:車輪和輪輞.第6節:機動自行車和摩托車全部用或部分用輕質合金制造的道路車輪規范 | Tyres and wheels - Wheels and rims - Specification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles |
| BS AU 50-2.7a | 輪胎和車輪.第2部分:車輪和輪輞.第7節:商用車輛輪胎和車輪的選擇和維護實用規程 | Tyres and wheels - Wheels and rims - Code of practice for the selection and care of tyres and wheels for commercial vehicles |
| BS AU 50-2.8a | 輪胎和車輪.第2部分:車輪及輪輞.第8節:乘用車車輪的選擇與保養實用規程(包括大篷車和輕型掛車) | Tyres and wheels - Wheels and rims - Code of practice for the selection and care of wheels for passenger cars (including caravans and light trailers) |
| BS AU 50-3.1e | 輪胎和車輪.閥門.尺寸、名稱與符號、使用中閥門壓力等級和夾緊閥門扭矩 | Tyres and wheels - Valves - Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves |
| BS AU 50-3.7 | 輪胎和車輪.氣門.乘用車(含大篷車和輕型拖車)輪胎充氣氣門的選擇和保養實用規程 | Tyres and wheels - Valves - Code of practice for the selection and care of tyre inflation valves for passenger cars (including caravans and light trailers) - Section 7: Code of practice for the selection and care of tyre inflation valves for passenger cars (including cartavens and light vehicles |
| BS AU 50-3.8 | 輪胎和車輪.氣門.商用車輛輪胎充氣氣門的選擇和保養實用規程 | Tyres and wheels - Valves - Code of practice for the selection and care of tyre inflation valves for commercial vehicles - Section 8a: Code of practice for the selection and care of tyre inflation valves for commercial vehicles |
| BS AU 50-4.2.1a | 輪胎和輪子.輪輞的外形和尺寸.商用車輛輪輞.米制系列輪輞規范 | Tyres and wheels - Rim profiles and dimensions - Commercial vehicle rims - Specification for metric series rims - Section 2: Commercial vehicle rims Subsection 2.1a: Specification for metric series rims |
| BS AU 50-4.5.1 | 輪胎和車輪.第4部分:輪輞外廓和尺寸.第5節:工業用車輪輞.第1小節:代碼制定系列輪胎用輪輞外廓和尺寸規范 | Tyres and wheels - Rim profiles and dimensions - Industrial vehicle rims - Specification for rim profiles and dimensions for code-designated series tyres |
| BS AU 50-4.5.2 | 輪胎和車輪.輪輞外廓和尺寸.工業用車輛輪輞.充氣輪胎用輪輞的公制系列充氣輪胎和實心輪胎的輪輞外廓和尺寸 | Tyres and wheels - Rim profiles and dimensions - Industrial vehicle rims - Specification for rim profiles and dimensions for metric series pneumatic tyres and solid tyres for pneumatic tyre rims |
| BS AU 50-4.6.3 | 輪胎和車輪.輪輞外廓和尺寸.摩托車輪輞.代碼指定系列輪輞(直徑代碼4-12)規范 | Tyres and wheels - Rim profiles and dimensions - Motorcycle rims - Specification for code designated series (diameter codes 4 to 12) rims |
| BS AU 50-4.7.1 | 輪胎和車輪.輪輞外廓和尺寸.機動自行車輪輞.機動自行車輪輞規范 | Tyres and wheels - Rim profiles and dimensions - Moped rims - Specification for moped rims |
| BS AU 7a | 道路車輛電纜的顏色標志規范 | Specification for colour code for road vehicle electrical cables |
| BS AU 88a | 汽車用輕型電纜額定容量推薦標準 | Recommendations for ratings for light duty cables for automobile use |
| BS AU 91 | 起動蓄電池圓錐形接線端子的電纜接頭尺寸(用正極接地部件的汽車和輕便商用汽車)規范 | Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) |
| BS C 15 | 航空用牽引車桿連接件的連接尺寸規范 | Specification for coupling dimensions for aircraft-to-tractor tow bar connections |
| BS CWA 15145 | 機動車燃料.內燃機用柴油乳劑中的水.要求和試驗方法 | Automotive fuels - Water in diesel fuel emulsions for use in internal combustion engines - Requirements and test methods |
| BS CWA 15293 | 機動車燃料.乙醇E85.要求和試驗方法 | Automotive fuels - Ethanol E85 - Requirements and test methods |
| BS CWA 15539 | 列車的編號和代碼系統 | Numbering of and coding system for trains |
| BS DD 203-1 | 工業自動化:車間生產.確定要求的標準化和方法學參照模型 | Industrial automation: shop floor production - Reference model for standardization and a methodology for identification of requirements |
| BS DD 203-2 | 工業自動化:車間生產.標準化和方法學參照模型的應用 | Industrial automation: shop floor production - Application of the reference model for standardization and methodology |
| BS DD CEN ISO/TS 17261 | 智能運輸系統.自動車輛和設備識別.聯運貨物運輸體系和術語 | Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology |
| BS DD CEN ISO/TS 17262 | 自動車輛和設備識別.聯運貨物運輸.編號和數據結構 | Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures |
| BS DD CEN ISO/TS 17263 | 自動車輛和設備識別.聯運貨物運輸.系統參數 | Automatic vehicle and equipment identification - Intermodal goods transport - System parameters |
| BS DD CEN ISO/TS 17573 | 道路運輸和運輸量遠程信息管理.電子費用收集(EFC).與運輸業務有關的車輛的系統結構 | Road transport and traffic telematics - Electronic fee collection (EFC) - System architecture for vehicle related transport services |
| BS DD CEN/TS 13149-3 | 公共運輸.道路車輛調度和控制系統.WorldFIP文電內容 | Public transport - Road vehicle scheduling and control systems - WorldFIP message content |
| BS DD CEN/TS 13149-6 | 公共運輸.道路車輛調度和控制系統.CAN文電內容 | Public transport - Road vehicle scheduling and control systems - CAN message content |
| BS DD CEN/TS 14778-2 | 固體生物燃料.抽樣.卡車運輸?shù)念w粒物質的取樣方法 | Solid biofuels - Sampling - Methods for sampling particulate material transported in lorries |
| BS DD CEN/TS 14906 | 皮革.裝飾用皮革特性.車輛用皮革的選擇指南 | Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive |
| BS DD CEN/TS 15213-1 | 道路運輸和交通遠程信息處理.防止自行車偷竊的竊后系統參考結構和術語 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Reference architecture and terminology |
| BS DD CEN/TS 15213-2 | 道路運輸和交通遠程信息處理.防止自行車偷竊的竊后系統參考結構和術語.通用情況信息單元 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Common status message elements |
| BS DD CEN/TS 15213-3 | 道路運輸和交通遠程信息處理.被盜車輛回收或歸還用盜后紀錄系統.近程通訊用接口和系統要求 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Interface and system requirements for short range communication |
| BS DD CEN/TS 15213-4 | 道路運輸和交通遠程信息處理.被盜車輛回收或歸還用盜后紀錄系統.遠程通訊用接口和系統要求 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Interface and system requirements for long range communication |
| BS DD CEN/TS 15213-5 | 道路運輸和交通遠程信息處理.被盜車輛回收或歸還用盜后紀錄系統.信息接口 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Messaging interface |
| BS DD CEN/TS 15504 | 公共運輸.道路車輛.車輛中明顯的可變的乘客信息裝置 | Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle |
| BS DD CLC/TS 50502 | 鐵路設施.鐵路車輛.無軌電車上的電氣設備.安全要求和連接系統 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems |
| BS DD ENV 12315-1 | 交通和旅行信息(TTI).通過專用短程通信的TTI信息.數據規范.下行線路(路邊對車輛) | Traffic and traveller information (TTI) - TTI messages via dedicated short-range communication - Data specification - Downlink (roadside to vehicle) |
| BS DD ENV 12315-2 | 交通和旅行信息(TTI).通過專用短程通信的TTI信息.數據規范.上行線路(車輛對路邊) | Traffic and traveller information (TTI) - TTI messages via dedicated short-range communication - Data specification - Uplink (vehicle to roadside) |
| BS DD ENV 12694 | 公共運輸.道路車輛.可調的電子外部信號的尺寸要求 | Public transport - Road vehicles - Dimensional requirements for variable electronic external signs |
| BS DD ENV 13093 | 公交運輸.道路車輛.司機操縱臺機械接口的要求.小型顯示器和小鍵盤區參數 | Public transport - Road vehicles - Driver's console mechanical interface requirements - Minimum display and keypad parameters |
| BS DD ENV 13149-2 | 公共運輸.道路車輛調度表和控制系統.WORLDFIP電纜線路規范 | Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications |
| BS DD ENV 13563 | 交通控制設備.車輛檢測器 | Traffic control equipment - Vehicle detectors |
| BS DD IEC/PAS 62437 | 道上車輛、船舶和設備上用接收機保護的無線電干擾特性.限值和測量方法.有源天線規范 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Specifications for active antennas |
| BS DD ISO/PAS 11154 | 道路車輛.車頂載物架 | Road vehicles - Roof load carriers |
| BS DD ISO/PAS 22574 | 道路車輛.制動襯面摩擦材料.目視檢驗 | Road vehicles - Brake linings friction materials - Visual inspection |
| BS DD ISO/PAS 27145-1 | 道路車輛.全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求的執行.通用信息和用例定義 | Road vehicles - Implementation of WWH-OBD communication requirements - General information and use case definition |
| BS DD ISO/PAS 27145-2 | 道路車輛.全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求的執行.與普通排放相關的數據詞典 | Road vehicles - Implementation of WWH-OBD communication requirements - Common emissions-related data dictionary |
| BS DD ISO/PAS 27145-3 | 道路車輛.全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求的執行.通用信息詞典 | Road vehicles - Implementation of WWH-OBD communication requirements - Common message dictionary |
| BS DD ISO/PAS 27145-4 | 道路車輛.全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求的執行.車輛和試驗設備間連接 | Road vehicles - Implementation of WWH-OBD communication requirements - Connection between vehicle and test equipment |
| BS DD ISO/TS 11155-2 | 道路車輛.乘客艙內空氣過濾器.氣體過濾試驗 | Road vehicles - Air filters for passenger compartments - Test for gaseous filtration |
| BS DD ISO/TS 15827 | 道路車輛.試驗程序.小型女性假人手臂和大臂與司機前氣囊和側氣囊相互作用的評估 | Road vehicles - Test procedures - Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags |
| BS DD ISO/TS 16553 | 道路車輛.數據電纜.試驗方法和要求 | Road vehicles - Data cables - Test methods and requirements |
| BS EN 10240 | 鋼管內外保護覆層.用于自動化車間的熱浸鍍鋅規范 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| BS EN 1078 | 騎自行車的人和滑板及旱冰鞋使用者用的防護帽 | Helmets for pedal cyclists and for users of skateboards and roller skates |
| BS EN 1175-1 | 工業貨車安全.電氣要求.電池供電貨車的一般要求 | Safety of industrial trucks - Electrical requirements - General requirements for battery powered trucks |
| BS EN 1175-2 | 工業貨車安全.電氣要求.裝有內燃機貨車的一般要求 | Safety of industrial trucks - Electrical requirements - General requirements for internal combustion engine powered trucks |
| BS EN 1175-3 | 工業貨車安全.電氣要求.裝有內燃機貨車的供電系統特殊要求 | Safety of industrial trucks - Electrical requirements - Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| BS EN 12053 | 工業貨車安全.噪聲輻射測量試驗方法 | Safety of industrial trucks - Test methods for measuring noise emissions |
| BS EN 12080 | 鐵路設施.車箱體.滾動軸承 | Railway applications - Axleboxes - Rolling bearings |
| BS EN 12081 | 鐵路設施.車箱體.潤滑脂 | Railway applications - Axleboxes - Lubricating greases |
| BS EN 12082 | 鐵路設施.車箱體.性能測試 | Railway applications - Axleboxes - Performance testing |
| BS EN 12184 | 電動輪椅、小型摩托車及其充電器.要求和試驗方法 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| BS EN 12195-1 | 道路車輛上的裝載物固定組件.安全.捆綁力的計算 | Load restraint assemblies on road vehicles - Safety - Calculation of lashing forces |
| BS EN 12195-2 | 道路車輛的負載限動組件.安全性.人造纖維網繩 | Load restraint assemblies on road vehicles - Safety - Web lashing made from man-made fibres |
| BS EN 12195-3 | 道路車輛上物件的系固用具.安全.捆綁鏈 | Load restraint assemblies on road vehicles - Safety - Lashing chains |
| BS EN 12195-4 | 道路車輛上負荷系固組件.安全性.第4部分:捆綁鋼絲繩 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| BS EN 12252 | 液化石油氣(LPG)設備和附件.液化石油氣公路槽車裝備 | LPG equipment and accessories - Equipping of LPG road tankers |
| BS EN 12312-11 | 航空器地面支持設備.特殊要求.第11部分:容器/集裝箱推車和可拆卸載重拖車 | Aircraft ground support equipment - Specific requirements - Container/pallet dollies and loose load trailers |
| BS EN 12312-14 | 航空器地面支持設備.特殊要求.傷殘的/喪失勞動能力的乘客登機車輛 | Aircraft ground support equipment - Specific requirements - Disabled/incapacitated passenger boarding vehicles |
| BS EN 12312-2 | 飛行器地面支持設備.特殊要求.餐飲車 | Aircraft ground support equipment - Specific requirements - Catering vehicles |
| BS EN 124 | 車輛和行人道區域的排水溝蓋和人孔蓋.設計要求、型號試驗、標志、質量控制 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| BS EN 12414 | 車輛停泊控制設備.付款和出票機器.技術和功能要求 | Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements |
| BS EN 12415 | 機床安全性.小型數控車床和車削中心 | Safety of machine tools - Small numerically controlled turning machines and turning centres |
| BS EN 12424 | 工業、商業和汽車庫門.抗風力.分類 | Industrial, commercial and garage doors and gates - Resistance to wind load - Classification |
| BS EN 12425 | 工業、商業和汽車庫門.防水滲透性.分類 | Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification |
| BS EN 12426 | 工業、商業和汽車庫門.透氣率.分類 | Industrial, commercial and garage doors and gates - Air permeability - Classification |
| BS EN 12427 | 工業、商業和汽車庫門.透氣率.試驗方法 | Industrial, commercial and garage doors and gates - Air permeability - Test method |
| BS EN 12428 | 工業、商業和汽車庫門.熱傳遞.計算要求 | Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation |
| BS EN 12433-1 | 工業、商業和車庫用門.術語.門的類型 | Industrial, commercial, and garage doors and gates - Terminology - Types of doors |
| BS EN 12433-2 | 工業、商業和車庫用門.術語.門的零件 | Industrial, commercial, and garage doors and gates - Terminology - Parts of doors |
| BS EN 12444 | 工業、商業和車庫門.抗風載荷性.試驗和計算 | Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation |
| BS EN 12445 | 工業、商業和車庫用門.動力操縱門的使用安全性.試驗方法 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
| BS EN 12453 | 工業、商業和車庫門.動力操縱門的使用安全.要求 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements |
| BS EN 12478 | 機床的安全.大型數控車床和車削中心 | Safety of machine tools - Large numerically controlled turning machines and turning centres |
| BS EN 12489 | 工業、商業和汽車用門.抗水滲透性.試驗方法 | Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method |
| BS EN 12493 | 液化石油氣(LPG)用焊接鋼罐.槽罐車.設計和生產 | Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture |
| BS EN 12561-1 | 鐵路工具.有軌車.危險貨物運輸油罐車標記 | Railway applications - Tank wagons - Marking of tank wagons for the carriage of dangerous goods |
| BS EN 12561-2 | 鐵路設施.油罐車.包括回流蒸氣的液體產品用底部卸料裝置 | Railway applications - Tank wagons - Bottom emptying devices for liquid products including vapour return |
| BS EN 12561-3 | 鐵路設施.油罐車.壓力下液化氣用底部裝卸裝置 | Railway applications - Tank wagons - Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN 12561-4 | 鐵路設施.油罐車.液態產品用頂部裝卸裝置 | Railway applications - Tank wagons - Top devices for top emptying and filling of liquid products |
| BS EN 12561-5 | 鐵路設施.油罐車.液態產品用頂部裝填和底部卸料頂部裝置 | Railway applications - Tank wagons - Top devices for bottom emptying and top filling of liquid products |
| BS EN 12561-6 | 鐵路設施.油罐車.人孔 | Railway applications - Tank wagons - Manholes |
| BS EN 12561-7 | 鐵路設施.油罐車.月臺和梯子 | Railway applications - Tank wagons - Platforms and ladders |
| BS EN 12561-8 | 鐵路設施.油罐車.加熱連接件 | Railway applications - Tank wagons - Heating connections |
| BS EN 12604 | 工業,商業和車間門.機械性能.要求 | Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements |
| BS EN 12605 | 工業,商業和車間門.機械性能.試驗方法 | Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods |
| BS EN 12635 | 工業、商業和車庫的門和大門.安裝與使用 | Industrial, commercial and garage doors and gates - Installation and use |
| BS EN 12640 | 貨物和道路車輛的安全.貨物運輸用商業車輛的掛車點.最低要求和試驗 | Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing |
| BS EN 12641-1 | 可換式車箱和商用車輛.防水油布.最低要求 | Swap bodies and commercial vehicles - Tarpaulins - Part 1: Minimum requirements |
| BS EN 12641-2 | 互換車體和商用車輛.防水油布.第2部分:布簾廂式車輛的最低要求 | Swap bodies and commercial vehicles — Tarpaulins — Part 2: Minimum requirements for curtainsiders |
| BS EN 12642 | 道路車輛上貨物安全.商用車輛的車體結構.最低要求 | Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements |
| BS EN 12645 | 壓力量規.機動車輪胎膨脹和/或壓力檢驗設備.計量學,要求和試驗 | Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 12663 | 鐵路設施.鐵路車輛車身結構要求 | Railway applications - Structural requirements of railway vehicle bodies |
| BS EN 12674-2 | 車載集裝箱.一般設計和安全性原則 | Roll containers - General design and safety principles |
| BS EN 1273 | 兒童使用和護理用品.嬰兒學步車.安全性要求和試驗方法 | Child use and care articles - Baby walking frames - Safety requirements and test methods |
| BS EN 12736 | 電力驅動的道路車輛.用運載工具車上帶的充電器充電過程中車輛在空中發出的噪聲.聲功率水平的測定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
| BS EN 12757-1 | 涂層材料用攪拌機械.安全要求.車輛表面整修用的攪料機械 | Mixing machinery for coating materials - Safety requirements - Mixing machinery for use in vehicle refinishing |
| BS EN 12805 | 汽車用液化石油氣部件.容器 | Automotive LPG components - Containers |
| BS EN 12806 | 機動車用液化石油氣部件.不包括容器 | Automotive liquefied petroleum gas components - Other than containers |
| BS EN 12895 | 工業貨車.電磁兼容性 | Industrial trucks - Electromagnetic compability |
| BS EN 12929-2 | 載人用索道裝置的安全要求.一般要求.不帶重貨運輸車式剎車的雙向雙線架空索道的附加要求 | Safety requirments for cableways installations designed to carry persons - General requirements - Additional reqirments for reversible bicable aerial ropeways without carrier truck brakes |
| BS EN 12978 | 工業、商業和車庫用門.電動門的安全裝置.要求和試驗方法 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| BS EN 12979 | 汽車液化石油氣設備.安裝要求 | Automotive LPG systems - Installation requirements |
| BS EN 13043 | 道路、機場和其他行車區域用的瀝青混合物和表面處理用集料 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| BS EN 13059 | 工業用車輛的安全性.振動測量的試驗方法 | Safety of industrial trucks - Test methods for measuring vibration |
| BS EN 13103 | 鐵路設施.輪副和行車機構.非動力軸.設計方法 | Railway applications - Wheelsets and bogies - Non-powered axles - Design method |
| BS EN 13104 | 鐵路設施.輪副和行車機構.動力軸.設計方法 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
| BS EN 13129-1 | 鐵路設施.主干線鐵路機車車輛用空調.舒適度參數 | Railway applications - Air conditioning for main line rolling stock - Comfort parameters |
| BS EN 13129-2 | 鐵路設施.主干線鐵路車輛用空調.典型試驗 | Railway applications - Air conditioning for main line rolling stock - Type tests |
| BS EN 13149-1 | 公共交通.道路車輛調度和控制系統.車載數據傳輸?shù)腤ORLDFIP定義和應用規則 | Public transport - Road vehicle scheduling and control systems - WORLDFIP definition and application rules for onboard-data transmission |
| BS EN 13149-4 | 公共運輸.道路車輛調度和控制系統.CANopen運輸車的一般應用規則 | Public transport - Road vehicle scheduling and control systems - General application rules for CANopen transmission buses |
| BS EN 13149-5 | 公共運輸.道路車輛調度和控制系統.CANopen電纜敷設規范 | Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications |
| BS EN 1317-5 | 道路限制系統.車輛限制系統用產品要求和合格評估 | Road restraint systems - Product requirements and evaluation of conformity for vehicle restraint systems |
| BS EN 13178 | 人眼保護.雪地汽車使用者用護目器 | Personal eye protection - Eye protectors for snowmobile users |
| BS EN 13232-3 | 鐵路設施.軌道.鐵路側線和道岔口.車輪/鋼軌相互作用要求 | Railway applications - Track - Switches and crossings - Requirements for wheel/rail interaction |
| BS EN 13241-1 | 工業、商業和車庫門及大門.產品標準.不耐火產品或具有煙控特性的產品 | Industrial, commercial and garage doors and gates - Product standard - Products without fire resistance or smoke control characteristics |
| BS EN 13262 | 鐵路設施.輪副和行車機構.輪子.生產要求 | Railway applications - Wheelsets and bogies - Wheels - Product requirement |
| BS EN 13272 | 鐵路設施.公共運輸系統中機車車輛用電力照明 | Railway applications - Electrical lighting for rolling stock in public transport systems |
| BS EN 13308 | 危險物品運輸用槽罐車.槽罐車用輔助設備.無壓力平衡底閥 | Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve |
| BS EN 13314 | 危險物品運輸用槽罐車.槽罐車用輔助設備.裝填孔蓋 | Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover |
| BS EN 13316 | 危險物品運輸用槽罐車.槽罐車用輔助設備.壓力平衡底閥 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
| BS EN 13317 | 危險物品運輸用槽罐車.槽罐車用輔助設備.人孔蓋組件 | Tanks for transport of dangerous goods - Service equipment for Tanks - Manhole cover assembly |
| BS EN 13367 | 陶瓷機器.安全.傳送平臺和傳送車 | Ceramic machines - Safety - Transfer platforms and cars |
| BS EN 13375 | 防水用柔性薄板.混凝土船橋甲板和其他可通過車輛的混凝土表面的防水性.樣品制備 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation |
| BS EN 13385 | 可運輸氣瓶.永久的和液化的氣體(乙炔除外)用蓄電池驅動車輛.灌裝時的檢驗 | Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling |
| BS EN 13406 | 農用機械.淤泥槽車和噴撒裝置.環保.噴撒精度的要求和試驗方法 | Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision |
| BS EN 13423 | 壓縮天然氣車輛的使用 | Compressed natural gas vehicle operations |
| BS EN 13444-1 | 電動道路車輛.復合式車輛排放測量.熱電復合車輛 | Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Thermal electric hybrid vehicles |
| BS EN 13447 | 電動道路車輛.術語 | Electrically propelled road vehicles - Terminology |
| BS EN 13490 | 機械振動.工業貨車.駕駛員座椅振動的實驗室評定和規范 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
| BS EN 13594 | 專業摩托車駕駛者用防護手套.要求和試驗方法 | Protective gloves for professional motorcycle riders - Requirements and test methods |
| BS EN 13595-1 | 專業摩托車駕駛者用防護手套.夾克、長褲、單件或套服.一般要求 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - General requirements |
| BS EN 13595-2 | 摩托車專業駕駛者用的防護手套.夾克、長褲、單件或分離的套服.測定抗撞擊摩擦力的試驗方法 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Test method for determination of impact abrasion resistance |
| BS EN 13595-3 | 專業摩托車駕駛者用防護手套.夾克、長褲、單件或套服.撕裂強度的測試方法 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Test method for determination of burst strength |
| BS EN 13595-4 | 專業摩托車駕駛者用防護手套.夾克、長褲、單件或套服.沖擊切割阻力的試驗方法 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Test methods for the determination of impact cut resistance |
| BS EN 13596 | 防水用柔性薄板.混凝土船橋甲板和其他可通過車輛的混凝土表面的防水性.粘結強度的測定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength |
| BS EN 13634 | 專業摩托車駕駛者用防護鞋襪.要求和試驗方法 | Protective footwear for professional motorcycle riders - Requirements and test methods |
| BS EN 13653 | 防水用柔性薄板.混凝土船橋甲板和其他可通過車輛的混凝土表面的防水性.剪切強度的測定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength |
| BS EN 13674-1 | 鐵路設施.軌道.鋼軌.46kg/m及以上(列車)用丁字形鐵軌 | Railway applications - Track - Rail - Vignole railway rails 46 kg/m and above |
| BS EN 13715 | 鐵路設施.輪副和轉向架.車輪.車輪踏板 | Railway applications - Wheelsets and bogies - Wheels - Wheels tread |
| BS EN 13718-1 | 航空、水域和困難地形區域用救護車.連續救護患者用醫療器械接口要求 | Air, water and difficult terrain ambulances - Medical devices interface requirements for the continuity of patient care |
| BS EN 13718-2 | 航空、水域和困難地形區域用救護車.連續救護患者的操作和技術要求 | Air, water and difficult terrain ambulances - Operational and technical requirements for the continuity of patient care |
| BS EN 13760 | 輕型和重型車輛用機動車液化石油氣填充系統.噴油嘴試驗要求和尺寸 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
| BS EN 13775-1 | 鐵路設施.新型和改造的貨運車輛的測量.測量原則 | Railway applications - Measuring of new and modified freight wagons - Measuring principles |
| BS EN 13775-2 | 鐵路設施.新型和改造的貨運車輛的測量.帶轉向架的貨運車 | Railway applications - Measuring of new and modified freight wagons - Freight wagons with bogies |
| BS EN 13775-3 | 鐵路設施.新型和改造的貨運車輛的測量.帶2個輪副的貨運車 | Railway applications - Measuring of new and modified freight wagons - Freight wagons with 2 wheelsets |
| BS EN 13775-4 | 鐵路設施.新型和改造的貨運車輛的測量.帶兩個輪幅的轉向架 | Railway applications - Measuring of new and modified freight wagons - Bogies with 2 wheelsets |
| BS EN 13775-5 | 鐵路設施.新型和改造的貨運車輛的測量.帶3個輪副的貨運車 | Railway applications - Measuring of new and modified freight wagons - Bogies with 3 wheelsets |
| BS EN 13775-6 | 鐵路設施.新型和改造的貨運車輛的測量.多用和絞接貨運車輛 | Railway applications - Measuring of new and modified freight wagons - Multiple and articulated freight wagons |
| BS EN 13776 | 液化石油氣道路運輸罐裝車的灌裝和卸料程序 | Filling and discharge procedures for LPG road tankers |
| BS EN 13788 | 機床.安全性.多軸自動立式車床 | Machine tools - Safety - Multi-spindle automatic turning machines |
| BS EN 13796-1 | 載人纜索裝置的安全要求.運載裝置.夾緊裝置、運載車、車載制動器、艙、椅、車架、維修車、纜車架 | Safety requirements for cableway installations designed to carry persons - Carriers - Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
| BS EN 13807 | 移動式氣瓶.蓄電池車輛.設計、制造、標識和檢驗 | Transportable gas cylinders - Battery vehicles - Design, manufacture, identification and testing |
| BS EN 13848-2 | 鐵路設施.軌道.軌道幾何質量.測量系統.軌道檢查記錄車 | Railway applications - Track - Track geometry quality - Measuring systems - Track recording vehicles |
| BS EN 13856 | 汽車用液化石油氣系統用戶使用說明書內容的最低要求 | Minimum requirements for the content of the user manual for automotive LPG systems |
| BS EN 13878 | 休閑度假用旅行房車.術語和定義 | Leisure accommodation vehicles - Terms and definitions |
| BS EN 13920-12 | 鋁和鋁合金.廢料.單一合金的車床切屑 | Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy |
| BS EN 13920-13 | 鋁和鋁合金.廢料.含兩種或多種合金的混合車床切屑 | Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys |
| BS EN 13977 | 鐵路設施.軌道.建造和維修用便攜式機械和手搖車的安全要求 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| BS EN 13978-1 | 預制混凝土產品.預制混凝土車庫.房屋尺寸大小的整體式或連續單塊式加筋車庫的要求 | Precast concrete products - Precast concrete garages - Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
| BS EN 14010 | 機械安全.摩托車的動力傳動停車設備.設計、生產、裝配和交付使用階段的安全和EMC要求 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| BS EN 14021 | 防石頭和瓦礫的越野摩托車車手保護用防石護罩.要求和試驗方法 | Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods |
| BS EN 14116 | 危險物品運輸用槽罐車.產品識別裝置用數字接口 | Tanks for transport of dangerous goods - Digital interface for the product recognition device |
| BS EN 14198 | 鐵路設施.制動.被機車牽引的列車的制動系統要求 | Railway applications - Braking - Requirements for the brake systems of trains hauled by a locomotive |
| BS EN 14214 | 機動車燃料.柴油發動機用脂肪酸甲脂.要求和試驗方法 | Automotive fuels - Fatty acid methylesters (FAME) for diesel engines - Requirements and test methods |
| BS EN 14223 | 防水用軟薄板.混凝土船橋甲板和其他車輛可通過的混凝土表面的防水.吸水率的測定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption |
| BS EN 14224 | 防水柔性薄板材.混凝土橋甲板和其他車輛可通過的混凝土表面的防水.斷裂搭接能力的測定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability |
| BS EN 14274 | 石油及其產品的試驗方法.車用燃料.汽油及柴油質量的評估.燃料質量監測系統(FQMS) | Methods of test for petroleum and its products - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) |
| BS EN 14275 | 車用燃料.汽油及柴油質量的評估.零售點油泵及商業點燃料自動售貨機的抽樣 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
| BS EN 14327 | 皮革.物理和機械試驗.汽車皮革耐磨性的測定 | Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
| BS EN 1433 | 行車區域和行人區域用排水溝.分類、設計和試驗要求、標記和合格性評定 | Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
| BS EN 14334 | LPG槽罐車的檢驗和試驗 | Inspection and testing of LPG road tankers |
| BS EN 14344 | 兒童使用和護理用品.自行車用兒童座椅.安全要求和試驗方法 | Child use and care articles - Child seats for cycles - Safety requirements and test methods |
| BS EN 14363 | 鐵路設施.鐵路車輛運行特性的驗收試驗.運行性能試驗和穩定性試驗 | Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests |
| BS EN 14420-6 | 帶夾件的軟管配件.第6部分:TW油槽車聯接器 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| BS EN 14458 | 個人護眼設備.消防員用面罩和護目鏡及消防員、救護車和急救服務用高性能工業安全頭盔 | Personal eye-equipment - Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
| BS EN 14535-1 | 鐵路設施.鐵路車輛的制動盤.加壓或熱套到軸或驅動軸的制動盤的尺寸和質量要求 | Railway applications - Brake discs for railway rolling stock - Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
| BS EN 1459 | 工業用卡車的安全性.可變延伸機動卡車 | Safety of industrial trucks - Self-propelled variable reach trucks |
| BS EN 14619 | 滾輪運動設備.腳蹬踏板車.安全要求和試驗方法 | Roller sports equipment - Kick scooters - Safety requirements and test methods |
| BS EN 14678-1 | 液化石油氣(LPG)設備和附件.汽車罐裝設備用LPG設備的結構和性能.分配器 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Dispensers |
| BS EN 14691 | 防水用柔性薄板.車輛可通過的混凝土船橋甲板和其他混凝土表面的防水.通過熱調節測定兼容性 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning |
| BS EN 14692 | 防水用柔性薄板.車輛可通過的混凝土船橋甲板和其他混凝土表面的防水.瀝青層耐壓性測定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer |
| BS EN 14693 | 防水用柔性薄板.機動車行駛的混凝土橋面和其他混凝土路面的防水層.測定應用瀝青砂膠的瀝青薄板特性 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt |
| BS EN 14694 | 防水用柔性薄板.車輛可通過的混凝土船橋甲板和其他混凝土路面的防水.預處理產生損壞后耐動態水壓的測定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment |
| BS EN 14750-1 | 鐵路設施.城市和郊區全部車輛的空氣調節裝置.舒適參數 | Railway applications - Air conditioning for urban and suburban rolling stock - Comfort parameters |
| BS EN 14750-2 | 鐵路設施.城市和郊區全部車輛的空氣調節裝置.類型試驗 | Railway applications - Air conditioning for urban and suburban rolling stock - Type tests |
| BS EN 14752 | 鐵路設施.車廂側門系統 | Railway applications - Body entrance systems |
| BS EN 14764 | 城市和遠足自行車.安全要求和試驗方法 | City and trekking bicycles - Safety requirements and test methods |
| BS EN 14765 | 兒童自行車.安全要求和試驗辦法 | Bicycles for young children - Safety requirements and test methods |
| BS EN 14766 | 山地車.安全和試驗要求 | Mountain-bicycles - Safety requirements and test methods |
| BS EN 14781 | 賽車.安全要求和試驗方法 | Racing bicycles - Safety requirements and test methods |
| BS EN 14813-1 | 鐵路設施.機車駕駛室用空調.舒適參數 | Railway applications - Air conditioning for driving cabs - Comfort parameters |
| BS EN 14813-2 | 鐵路設施.機車駕駛室用空調.類型試驗 | Railway applications - Air conditioning for driving cabs - Type tests |
| BS EN 14841 | 液化石油氣(LPG)設備和附件.LPG罐車的卸料程序 | LPG equipment and accessories - Discharge procedures for LPG rail tankers |
| BS EN 14865-2 | 鐵路設施.軸套潤滑油.確保機車速度達到200km/h的機械穩定性試驗的方法 | Railway applications - Axlebox lubricating greases - Method to test the mechanical stability to cover vehicle speeds up to 20 0 km/h |
| BS EN 14872 | 自行車.自行車附件.行李架 | Bicycles - Accessories for bicycles - Luggage carriers |
| BS EN 1493 | 車輛升降機 | Vehicle lifts |
| BS EN 1501-1 | 垃圾收集車及其相關提升裝置.一般要求和安全性要求.后部裝載的垃圾收集車 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Rear-end loaded refuse collection vehicles |
| BS EN 1501-2 | 垃圾收集運輸車及其相關提升裝置.一般要求和安全要求.側面裝載的垃圾收集運輸車 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Side loaded refuse collection vehicles |
| BS EN 15020 | 鐵路設施.救援車掛鉤.性能要求、專用連接體幾何尺寸和試驗方法 | Railway Applications. Rescue Coupler. Performance Requirements, Specific Interface Geometry and Test Methods |
| BS EN 15033 | 利用LPG(液化石油氣)生產車輛和小船用衛生熱水的密封型貯水式熱水器 | Room sealed storage water heaters for the production of sanitaryhot water using LPG for vehicles and boats |
| BS EN 15152 | 鐵路設施.火車駕駛室用前擋風玻璃 | Railway applications - Front windscreens for train cabs |
| BS EN 15153-1 | 鐵路設施.高速火車用外部可視和聽得見的警告裝置.頭部、標記和尾燈 | Railway applications - External visible and audible warning devices for high speed trains - Head, marker and tail lamps |
| BS EN 15153-2 | 鐵路設施.高速火車用外部可視和聽得見的警告裝置.警告喇叭 | Railway applications - External visible and audible warning devices for high speed trains - Warning horns |
| BS EN 1525 | 工業貨車的安全性.無人駕駛貨車及其系統 | Safety of industrial trucks - Driverless trucks and their systems |
| BS EN 1526 | 工業貨車的安全性.貨車自動功能的附加要求 | Safety of industrial trucks - Additional requirements for automated functions on trucks |
| BS EN 15380-1 | 鐵路設施.鐵路車輛用命名系統.一般原則 | Railway applications - Designation system for railway vehicles - Part 1: General principles |
| BS EN 1551 | 工業用卡車的安全性.載重能力在10，000 kg 以上的自推進式卡車 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
| BS EN 1621-1 | 摩托車駕駛員防機械沖擊的防護服.沖擊防護的試驗方法和要求 | Motorcyclists' protective clothing against mechanical impact - Requirements and test methods for impact protectors |
| BS EN 1621-2 | 摩托車駕駛員防機械沖擊的防護服.摩托車駕駛員背部防護裝置.試驗方法和要求 | Motorcyclists' protective clothing against mechanical impact - Motorcyclists back protectors - Requirements and test methods |
| BS EN 1645-1 | 休閑旅居車輛.居住掛車.與健康和安全性有關的居住要求 | Leisure accommodation vehicles - Caravans - Habitation requirements relating to health and safety |
| BS EN 1645-2 | 休閑旅居車輛.旅居掛車.使用有效載荷 | Leisure accommodation vehicles - Caravans - User payloads |
| BS EN 1646-1 | 休閑居住車.電動旅居掛車.與健康和安全有關的居住要求 | Leisure accommodation vehicles - Motor caravans - Habitation requirements relating to health and safety |
| BS EN 1646-2 | 休閑旅居車輛.旅居機動掛車.使用有效載荷 | Leisure accommodation vehicles - Motor caravans - User payloads |
| BS EN 1647 | 休閑居住車.休假旅居掛車.與健康和安全有關的居住要求 | Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety |
| BS EN 1648-1 | 休閑旅居車輛.12V直流超低壓電器裝置.旅居掛車 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Caravans |
| BS EN 1648-2 | 休閑旅居車輛.12V直流超低壓電器裝置.機動旅居掛車 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Motor caravans |
| BS EN 1726-1 | 工業貨車的安全.荷載能力至10000Kg的自行貨車和拉桿拉力至20000N的工業牽引車.一般要求 | Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements |
| BS EN 1726-2 | 工業貨車的安全.荷載能力至10000Kg的自行貨車和拉桿拉力至20000N的工業牽引車.帶高架駕駛位的貨車和專為超 | Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| BS EN 1755 | 工業用卡車的安全.在潛在爆炸氣體環境下的工作.在可燃?xì)怏w,蒸氣,潮濕和灰塵下使用 | Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
| BS EN 1756-1 | 后置提升機.輪式車輛上安裝的平臺提升機.安全性要求.運貨用的車輛后置提升機 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Tail lifts for goods |
| BS EN 1757-1 | 工業貨車安全.腳踏貨車.叉車 | Safety of industrial trucks - Pedestrian propelled trucks - Stacker trucks |
| BS EN 1757-2 | 工業貨車安全.腳踏貨車.托盤貨車 | Safety of industrial trucks - Pedestrian propelled trucks - Pallet trucks |
| BS EN 1757-3 | 工業貨車安全.腳踏貨車.平板車 | Safety of industrial trucks - Pedestrian propelled trucks - Platform trucks |
| BS EN 1757-4 | 工業貨車安全.腳踏貨車.杠桿式升降機貨盤式貨車 | Safety of industrial trucks - Pedestrian propelled trucks - Scissor lift pallet-trucks |
| BS EN 1761 | 燃料卡車交付的橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| BS EN 1789 | 醫療車輛和其設備.道路救護車 | Medical vehicles and their equipment - Road ambulances |
| BS EN 1821-1 | 電動道路車輛.道路運力測量.純電動車輛 | Electrically propelled road vehicles - Measurement of road operating ability - Pure electric vehicles |
| BS EN 1821-2 | 電動道路車輛.道路通行能力的測量.熱電動復合動力車 | Electrically propelled road vehicles - Measurement of road operating ability - Thermal electric hybrid vehicles |
| BS EN 1846-1 | 消防車和救援車.名稱與命名符號 | Firefighting and rescue service vehicles - Nomenclature and designation |
| BS EN 1846-2 | 消防車和救援車.通用要求.安全性和性能 | Firefighting and rescue service vehicles - Common requirements - Safety and performance |
| BS EN 1846-3 | 消防車和救援車.固定安裝設備.安全和性能 | Firefighting and rescue service vehicles - Permanently installed equipment - Safety and performance |
| BS EN 1853 | 農業機械.帶傾卸車身的掛車.安全 | Agricultural machinery - Trailers with tipping body - Safety |
| BS EN 1865 | 道路救護車用的擔架和其它病人處理設備的規范 | Specifications for stretchers and other patient handling equipment used in road ambulances |
| BS EN 1888 | 護理兒童用品.輪式兒童車輛.安全要求和試驗方法 | Child care articles - Wheeled child conveyances - Safety requirements and test methods |
| BS EN 1889-2 | 地下采礦機械.移動式機械地下作業.安全.軌式機車 | Machines for underground mines - Mobile machines working underground - Safety - Rail locomotives |
| BS EN 1929-1 | 籃式推車.帶或不帶兒童乘坐設備的籃式推車的試驗和要求 | Basket trolleys - Requirements and tests for basket trolleys with or without a child carrying facility |
| BS EN 1929-2 | 籃式手推車.用于載客傳送帶的有或無兒童乘坐設備的籃式手推車的要求、試驗和檢驗 | Basket trolleys - Requirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors |
| BS EN 1929-3 | 籃式手推車.有或無兒童乘坐設備的帶附加載貨設施的籃式手推車的要求和試驗 | Basket trolleys - Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility |
| BS EN 1929-4 | 籃式手推車.用于載客傳送帶的有或無兒童乘坐設備的帶附加載貨設施的籃式手推車的要求和試驗 | Basket trolleys - Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors |
| BS EN 1929-7 | 籃式手推車.帶嬰兒或兒童乘坐設備的籃式手推車的要求和試驗 | Basket trolleys - Requirements and tests for basket trolleys with baby and child carrying facilities |
| BS EN 1938 | 個人眼睛保護.摩托車和機動腳踏兩用車護目鏡 | Personal eye protection - Goggles for motorcycle and moped users |
| BS EN 1947 | 消防軟水管.消防泵和車用半剛性輸送軟水管和水管組件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| BS EN 1949 | 休閑旅居活動車和其他道路車內居住用的石油液化氣系統的安裝規范 | Specification for the installation of LPG systems for habitation purpose s in leisure accommodation vehicles and in other vehicles |
| BS EN 1986-1 | 電動道路車輛.能量特性測定.純電動車 | Electrically propelled road vehicles - Measurement of energy performances - Pure electric vehicles |
| BS EN 1986-2 | 電動道路車輛.能量特性測定.熱電復式動力車 | Electrically propelled road vehicles - Measurement of energy performances - Thermal electric hybrid vehicles |
| BS EN 1987-1 | 電車.特殊安全要求.儲能板 | Electrically propelled road vehicles - Specific requirements for safety - On board energy storage |
| BS EN 1987-2 | 電車.特殊安全要求.功能安全措施和失效防護 | Electrically propelled road vehicles - Specific requirements for safety - Functional safety means and protection against failures |
| BS EN 1987-3 | 電車.特殊安全要求.乘客電傷害防護措施 | Electrically propelled road vehicles - Specific requirements for safety - Protection of users against electrical hazards |
| BS EN 228 | 機動車燃料.無鉛汽油.要求和試驗方法 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| BS EN 286-2 | 裝空氣或氮氣用簡單不用火加熱的壓力容器.汽車和拖車氣動剎車和輔助系統用壓力容器規范 | Simple unfired pressure vessels designed to contain air or nitrogen - Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| BS EN 286-3 | 裝空氣或氮氣用的不用火加熱的一般壓力容器.第3部分:用于鐵路運輸車輛空氣制動和輔助氣動設備的鋼制壓力容 | Simple unfired pressure vessels designed to contain air or nitrogen - Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS EN 286-4 | 裝空氣或氮氣用的不點火加熱的一般壓力容器.第4部分:用于鐵路運輸車輛空氣制動和輔助氣動設備的鋁合金壓力 | Simple unfired pressure vessels designed to contain air or nitrogen - Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS EN 29367-1 | 滾裝船汽車?yán)壓凸潭ㄑb置一般要求.第1部分:商業用車輛和車輛組合(半掛車除外). | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Commercial vehicles and combinations of vehicles, semi-trailers excluded |
| BS EN 29367-2 | 滾裝船汽車?yán)壓凸潭ㄑb置一般要求.第2部分:半掛車 | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Semi-trailers |
| BS EN 30326-1 | 機械振動.車座振動實驗室評定方法.基本要求 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Basic requirements |
| BS EN 474-6 | 土方機械.安全性.翻斗車的要求 | Earth-moving machinery - Safety - Requirements for dumpers |
| BS EN 474-6 | 土方機械.安全.第6部分:垃圾傾倒車的要求 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers- |
| BS EN 50066 | 道路車輛交流電源供電設備用小型連接器規范 | Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| BS EN 50121-3-1 | 鐵路設施.電磁兼容性.機車車輛.火車及配套車輛 | Railway applications - Electromagnetic compatibility - Rolling stock - Train and complete vehicle |
| BS EN 50121-3-2 | 鐵路設施.電磁兼容性.機車車輛.儀表 | Railway applications - Electromagnetic compatibility - Rolling stock - Apparatus |
| BS EN 50125-1 | 鐵路設施.設備環境條件.平板車載設備 | Railway applications - Environmental conditions for equipment - Equipment on board rolling stock |
| BS EN 50148 | 出租車電子計程表 | Electronic taximeters |
| BS EN 50153 | 鐵路設施.鐵路車輛.有關電氣事故的防護措施 | Railway applications - Rolling stock - Protective provisions relating to electrical hazards |
| BS EN 50155 | 鐵路設施.鐵道車輛用電子設備 | Railway applications - Electronic equipment used on rolling stock |
| BS EN 50194-2 | 家庭房屋中可燃?xì)怏w檢測用電氣設備.第2部分:娛樂車輛和類似經營場所中固定裝置連續運轉用電氣設備.附加試驗 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements |
| BS EN 50206-1 | 鐵路設施.軌道車輛.集電器:特征和試驗.干線車輛的集電器 | Railway applications - Rolling stock - Pantographs: characteristics and tests - Pantographs for main line vehicles |
| BS EN 50206-2 | 鐵路設施.軌道車輛.集電器:特征和試驗.城市鐵路和輕軌車輛用的集電器 | Railway applications - Rolling stock - Pantographs: characteristics and tests - Pantographs for metros and light rail vehicles |
| BS EN 50215 | 鐵路設施.竣工后投入使用前機車車輛的檢驗 | Railway applications - Testing of rolling stock after completion of construction and before entry into service |
| BS EN 50238 | 鐵路設施.機車車輛和列車檢測系統間的兼容性 | Railway applications - Compatibility between rolling stock and train detection systems |
| BS EN 50239 | 鐵路設施.貨運牽引車輛無線電遙控系統 | Railway applications - Radio remote control system of traction vehicle for freight traffic |
| BS EN 50264-1 | 鐵路設施.有特殊防火性能的鐵路機車車輛電纜.標準壁厚.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements |
| BS EN 50264-2 | 鐵路設施.有特殊防火性能的鐵路機車車輛電纜.標準壁厚.單芯電纜 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables |
| BS EN 50264-3 | 鐵路設施.有特殊防火性能的鐵路機車車輛電纜.標準壁厚.多芯電纜 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables |
| BS EN 50305 | 鐵道設施.具有特別防火性能的鐵道機車車輛.試驗方法 | Railway applications - Railway rolling stock cables having special fire performance - Test methods |
| BS EN 50306-1 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements |
| BS EN 50306-2 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.單芯電纜 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables |
| BS EN 50306-3 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.單芯和多芯電纜(雙芯、三芯和四芯)的屏障及薄壁護套 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
| BS EN 50306-4 | 鐵路設施.有專門防火性能的鐵路機車車輛電纜.薄壁.標準壁護套的多芯和多對電纜 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed |
| BS EN 50311 | 鐵路設施.機車車輛.照明熒光燈用直流電子鎮流器 | Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps |
| BS EN 50343 | 鐵路設施.鐵路車輛.電纜敷設的安裝規則 | Railway applications - Rolling stock - Rules for installation of cabling |
| BS EN 50355 | 鐵路設施.有特殊防火效能的鐵路機車電纜.薄壁和標準壁.使用指南 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use |
| BS EN 50374 | 導向車 | Conductor cars |
| BS EN 50388 | 鐵路設施.電源設備和鐵路車輛.為達到互操作性的電源設備(變電站)和鐵路車輛間配合的技術標準 | Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
| BS EN 50436-1 | 酒精聯動裝置.試驗方法和性能要求.檢查酒后駕車肇事者的儀器 | Alcohol interlocks - Test methods and performance requirements - Instruments for drink-driving-offender programs |
| BS EN 55012 | 車輛,船舶,內燃機驅動裝置.無線電干擾特性.（不包括那些在車輛/小船/驅動裝置中自身安裝的接收機或其附近車 | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices |
| BS EN 55025 | 車載、船載和設備上的接收機抗無線電干擾特征.限值和測量方法 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement |
| BS EN 589 | 機動車用燃料.液化石油氣(LPG).要求和試驗方法 | Automotive fuels - LPG - Requirements and test methods |
| BS EN 590 | 機動車燃料.柴油.要求和試驗方法 | Automotive fuels - Diesel - Requirements and test methods |
| BS EN 60034-2 | 旋轉電機.旋轉電機械的損耗和效率的試驗測定方法(不包括牽引車輛用電機) | Rotating electrical machines - Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) |
| BS EN 60077-1 | 鐵路設施.機車車輛用電氣設備.一般服務條件和一般規則 | Railway applications - Electric equipment for rolling stock - General service conditions and general rules |
| BS EN 60077-2 | 鐵路設施.機車車輛用電氣設備.電氣元件.一般規則 | Railway applications - Electric equipment for rolling stock - Electrotechnical components - General rules |
| BS EN 60077-3 | 鐵路設施.機車車輛用電氣設備.電氣部件.直流斷路器規則 | Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for d.c. circuit-breakers |
| BS EN 60077-4 | 鐵路設施.機車車輛用電氣設備.電工元件.交流斷路器規則 | Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for AC circuit-breakers |
| BS EN 60077-5 | 鐵路設施.鐵路車輛用電氣設備.電工元件.HV熔斷器規則 | Railway applications - Electrotechnical equipment for rolling stock - Electrotechnical components - Rules for HV fuses |
| BS EN 60095-4 | 鉛酸啟動蓄電池組.第4部分:重型商用車輛用蓄電池組的尺寸 | Lead-acid starter batteries - Dimensions of batteries for heavy commercial vehicles |
| BS EN 60310 | 鐵路設施.鐵道車輛上的牽引變壓器和電感器 | Railway applications - Traction transformers and inductors on board rolling stock |
| BS EN 60322 | 鐵路.鐵道車輛電氣設備.開放結構電源電阻器規則 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
| BS EN 60335-2-95 | 家用和類似用途電器.安全.住宅用垂直移動汽車庫門驅動裝置的特殊要求 | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| BS EN 60349-1 | 鐵路用途.鐵路與公路車輛用旋轉電機.用于除電子變換器饋電交流電動機之外的機器 | Railway applications - Rotating electrical machines for rail and road vehicles - Machines other than electronic convertor-fed alternating current motors |
| BS EN 60349-2 | 鐵路設施.鐵路和公路車輛用旋轉電機.電子變流器饋電交流電動機 | Railway applications - Rotating electrical machines for rail and road vehicles - Electronic convertor-fed alternating current motors |
| BS EN 60357 | 鹵鎢燈(非車輛用).性能規范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| BS EN 60432-3 | 白熾燈安全規范.鹵鎢燈(非車用) | Incandescent lamps - Safety specifications - Tungsten-halogen lamps (non-vehicle) |
| BS EN 60721-3-5 | 環境條件分類.第3部分:環境參數組及其嚴酷程度分類.第5節:地面車輛裝配 | Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Ground vehicle installations |
| BS EN 60809 | 道路車輛用白熾燈.尺寸、電氣性能和照度要求 | Lamps for road vehicles - Dimensional, electrical and luminous requirements |
| BS EN 60810 | 道路車輛用燈.性能要求 | Lamps for road vehicles - Performance requirements |
| BS EN 61287-1 | 鐵路設施.安裝在鐵路機車上的功率變換器.第1部分:特征和試驗方法 | Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods |
| BS EN 61373 | 鐵路設施.機車車輛設備.沖擊和振動試驗 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| BS EN 61377-1 | 鐵路設施.機車車輛.反向供電交流電動機及其控制系統的聯合測試 | Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control system |
| BS EN 61377-2 | 鐵路設施.機車車輛.聯合試驗.斷路直流牽引電動機及其控制設備 | Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control |
| BS EN 61377-3 | 鐵路設施.鐵路車輛.由間接變流器饋電的交流電動機及其控制系統的聯合檢驗 | Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| BS EN 61851-1 | 電動車輛感應加載系統.一般要求 | Electric vehicle conductive charging system - General requirements |
| BS EN 61851-21 | 電動車輛導電充電系統.導電連接至交流/直流的電動車輛要求.電源 | Electric vehicle conductive charging system - Electric vehicle requirements for conductive connection to an a.c./d.c - supply |
| BS EN 61851-22 | 電動車輛導電充電系統.交流電動車輛充電站 | Electric vehicle conductive charging system - A.C. electric vehicle charging station |
| BS EN 61881 | 鐵路設施.機車車輛設備.電源電子裝置電容器 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| BS EN 61982-1 | 電動道路車輛推進用蓄電池.第1部分:試驗參數 | Secondary batteries for the propulsion of electric road vehicles -Part 1: Test parameters |
| BS EN 61982-2 | 電動道路車輛驅動用二次電池.動態放電性能試驗和動態耐久試驗 | Secondary batteries for the propulsion of electric road vehicles - Dynamic discharge performance test and dynamic endurance test |
| BS EN 61982-3 | 道路電氣車輛推進用的二次蓄電池.性能和壽命試驗(與交通相容的城市車輛) | Secondary batteries for the propulsion of electric road vehicles - Performance and life testing (traffic compatible, urban use vehicles) |
| BS EN 62022 | 由車輛運輸?shù)目裳h(huán)利用或不可循環利用材料中γ輻射的控制和檢測用已安裝的監測器 | Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
| BS EN 62196-1 | 電氣機車輸入端和機車連接器用插頭和插座.電氣機車傳導沖電.250A交流和400A直流及以下的電氣機車充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c |
| BS EN 624 | 專用液化石油氣器具規范.車輛和小船中安裝的房間用密封式液化石油氣空間加熱設備 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| BS EN 721 | 休閑住宿車輛.安全通風要求 | Leisure accommodation vehicles - Safety ventilation requirements |
| BS EN 722-1 | 休閑旅居車輛.液體燃料加熱系統.居住掛車和休閑居住車 | Leisure accommodation vehicles - Liquid fuel heating systems - Caravans and caravan holiday homes |
| BS EN 957-10 | 固定的訓練器材.帶固定輪或無活動輪的訓練用自行車的附加特定安全要求和試驗方法 | Stationary training equipment - Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods |
| BS EN 957-6 | 固定的訓練器材.踏車.補充特殊安全要求和試驗方法 | Stationary training equipment - Treadmills, additional specific safety requirements and test methods |
| BS EN ISO 11439 | 氣瓶.車上貯存機動車用天然氣燃料用高壓氣瓶 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS EN ISO 11446 | 道路車輛.牽引車和掛車的電氣連接用連接器.標稱電源電壓為12V的車輛用13極連接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage |
| BS EN ISO 12215-4 | 小艇.船體構造和船材尺寸.車間和生產 | Small craft - Hull construction and scantlings - Workshop and manufacturing |
| BS EN ISO 14460 | 賽車駕駛員的防護服.對熱和火焰的防護.性能要求和試驗方法 | Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods |
| BS EN ISO 14505-2 | 熱環境的人類工效學.車輛熱環境評估.等效溫度測定 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Determination of equivalent temperature |
| BS EN ISO 14505-3 | 熱環境人類工效學.車輛的熱環境評估.人類熱舒適性評估 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Evaluation of thermal comfort using human subjects |
| BS EN ISO 14814 | 道路運輸和交通遠程信息處理.自動車輛和設備識別.參考體系結構和術語 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology |
| BS EN ISO 14815 | 道路運輸與交通遠程信息處理.自動車輛和設備識別.系統規范 | Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications |
| BS EN ISO 14816 | 道路運輸和交通遠程信息處理.自動車輛和設備識別.編號和數據結構 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure |
| BS EN ISO 15005 | 道路車輛.運輸信息和控制系統的人類工效學特性.對話管理原則和一致性程序 | Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures |
| BS EN ISO 15006 | 道路車輛.交通信息和控制系統的人類工程學方面.車內聲音信號表示規范和聲順性規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation |
| BS EN ISO 15007-1 | 道路車輛.與運輸信息和控制系統有關的司機目視行為的測量.定義和參數 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters |
| BS EN ISO 15008 | 道路車輛.運輸信息和控制系統的人類工效學.車內視力表達規范和一致性規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation |
| BS EN ISO 17287 | 道路車輛.運輸信息和控制系統的工效學.駕駛時適用性的評定規程 | Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving |
| BS EN ISO 20566 | 涂料和清漆.實驗室洗車測定涂層系統的耐劃痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS EN ISO 20847 | 石油及其產品的試驗方法.BS 2000-496:石油產品.機動車燃料的硫含量的測定.能量分散X-射線熒光光譜法 | Methods of test for petroleum and its products - BS 2000-496: Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry |
| BS EN ISO 20884 | 石油及其產品的試驗方法.BS 2000-497:石油產品.機動車燃料的硫含量的測定.波長分散X-射線熒光光譜法 | Methods of test for petroleum and its products - BS 2000-497: Determination of sulfur content of automotive fuels - Wavelength- dispersive X-ray fluorescence spectrometry |
| BS EN ISO 21281 | 自行式乘坐控制工業貨車的踏板結構和布局.踏板結構和布局的原則 | Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals |
| BS EN ISO 3095 | 鐵路設施.聲學.有軌車輛發出的噪音測量 | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles |
| BS EN ISO 3381 | 鐵路設施.聲學.有軌車內噪聲的測量 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles |
| BS EN ISO 3450 | 土方機械的安全.剎車系統規范和橡膠輪胎機械的性能要求和檢驗程序 | Safety of earth-moving machinery - Specification for braking systems and performance requirements and test procedures for rubber-tyred machines |
| BS EN ISO 4165 | 道路車輛.電氣連接裝置.雙極連接 | Road vehicles - Electrical connections - Double-pole connection |
| BS EN ISO 6115 | 造船.拖網絞車 | Shipbuilding - Trawl winches |
| BS EN ISO 7284 | 電阻焊設備.汽車工業用多點點焊的兩個單獨副線圈的變壓器詳細規范 | Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry |
| BS EN ISO 8092-1 | 道路車輛.車上電氣布線線束的連接.單極連接接頭用接線片.尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements |
| BS EN ISO 8092-2 | 道路車輛.車載電氣線束用連接器.定義、試驗方法和一般性能要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Definitions, test methods and general performance requirements |
| BS EN ISO 8092-3 | 道路車輛.車上安裝電線束的連接.多極連接的標記.尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for multi-pole connections - Dimensions and specific requirements |
| BS EN ISO 8092-4 | 道路車輛.車上安裝電線束的連接.單極和多極連接用銷釘.尺寸和特定要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Pins for single- and multi-pole connections - Dimensions and specific requirements |
| BS EN ISO 8795 | 用于輸送供人消耗用水的塑料管道系統.析出物滲移量的車測定.塑料管道、管件和連接件的析出物滲移量的測定 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints |
| BS EN ISO 9785 | 船舶和海上技術.可行駛內燃機機動車的貨艙空間的通風.需要的總氣流量的理論計算 | Ship and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required |
| BS ISO 10056 | 機械振動.鐵路車輛里乘客和乘務員全身振動的測量和分析 | Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| BS ISO 10231 | 摩托車輪胎.檢驗輪胎負荷的試驗方法 | Motorcycle tyres - Test methods for verifying tyre capabilities |
| BS ISO 10326-2 | 機械振動.評價車輛座椅振動的實驗室方法.用于鐵路車輛 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Application to railway vehicles |
| BS ISO 10521-1 | 道路車輛.道路阻力加載.在參照大氣條件下的測定 | Road vehicles - Road load - Determination under reference atmospheric conditions |
| BS ISO 10521-2 | 道路車輛.道路阻力加載.底盤測功機上的再現 | Road vehicles - Road load - Reproduction on chassis dynamometer |
| BS ISO 10525 | 長6m(20ft)及大于6m(20ft)的貨運集裝箱裝卸用平衡式卡車.附加穩定性試驗 | Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests |
| BS ISO 10542-3 | 殘疾人或行動障礙人用技術設備和輔助裝置.輪椅系固裝置和乘車人安全束護系統.對接型系固裝置 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Docking-type tiedown systems |
| BS ISO 10542-4 | 殘疾人或行動障礙人用技術系統和輔助設備.輪椅系固裝置和乘車人安全束護系統.夾緊式系固裝置 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant restraint systems - Clamping-type tiedown systems |
| BS ISO 10542-5 | 殘疾人或行動障礙人用技術設備和輔助裝置.輪椅系固裝置和乘車人安全束護系統.專用輪椅設備 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Systems for specific wheelchairs |
| BS ISO 10658 | 用電動設備橫向碼放貨物的特殊條件下的工業用卡車.附加的穩定性試驗 | Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices - Additional stability test |
| BS ISO 10815 | 機械振動.列車通過鐵路隧道產生振動的測量 | Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains |
| BS ISO 10844 | 聲學.測量道路車輛發出噪音用試驗車道規范 | Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles |
| BS ISO 1103 | 道路車輛.居住掛車和輕型掛車的聯接球.尺寸 | Road vehicles - Coupling balls for caravans and light trailers - Dimensions |
| BS ISO 11096 | 道路車輛.行人保護.步行者的大腿、小腿和膝的撞擊試驗方法 | Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee |
| BS ISO 11157 | 道路車輛.制動襯片組件.慣性測功機試驗方法 | Road vehicles - Brake lining assemblies - Inertia dynamometer test method |
| BS ISO 11425 | 機動車動力轉向裝置用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| BS ISO 11451-1 | 道路車輛.窄帶輻射的電磁能量產生的電子干擾的車輛試驗方法.一般原則和術語 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - General principles and terminology |
| BS ISO 11451-3 | 道路車輛.窄帶輻射電磁能量的電干擾車輛試驗方法.車載發射機模擬 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - On-board transmitter simulation |
| BS ISO 11451-4 | 道路車輛.窄帶輻射電磁能量電器干擾的車輛試驗方法.大電流量注入法(BCI) | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Bulk current injection (BCI) |
| BS ISO 11452-4 | 道路車輛.窄帶輻射電磁能量產生的電干擾用部件試驗方法.大容量電流注入(BCI) | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Bulk current injection (BCI) |
| BS ISO 11452-8 | 道路車輛.窄帶輻射電磁能量的電干擾元部件試驗方法.磁場抗擾性 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Immunity to magnetic fields |
| BS ISO 11460 | 兩輪摩托車.照明和光信號裝置的位置控制 | Two-wheeled motorcycles - Positioning of lighting and light-signalling devices |
| BS ISO 11486 | 摩托車.用底盤測力計確定運行阻力的方法 | Motorcycles - Methods for setting the running resistance on a chassis dynamometer |
| BS ISO 11565 | 道路車輛.火花塞.試驗方法和要求 | Road vehicles - Spark-plugs - Test methods and requirements |
| BS ISO 11783-7 | 農業和林業用牽引車和機械裝置.系列控制和通信數據網.實施電文應用層 | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Implement messages application layer |
| BS ISO 11841-1 | 道路車輛和內燃發動機.濾清器詞匯.濾清器和濾清器元件定義 | Road vehicles and internal combustion engines - Filter vocabulary - Definitions of filters and filter components |
| BS ISO 11841-2 | 道路車輛和內燃發動機.濾清器詞匯.濾清器及其元件特性的定義 | Road vehicles and internal combustion engines - Filter vocabulary - Definitions of characteristics of filters and their components |
| BS ISO 11898-3 | 道路車輛.控制器區域網(CAN).低速、耐故障、依賴媒介的界面 | Road vehicles - Controller area network (CAN) - Low-speed, fault-tolerant, medium-dependent interface |
| BS ISO 11898-5 | 道路車輛.控制器局域網絡(CAN).低功率模式的高速媒體訪問單元 | Road vehicles - Controller area network (CAN) - High-speed medium access unit with low-power mode |
| BS ISO 11992-4 | 道路車輛.牽引和被牽引車輛之間電氣連接的數字信息的交換.診斷 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Diagnostics |
| BS ISO 12097-1 | 道路車輛.氣囊部件.詞匯 | Road vehicles - Airbag components - Vocabulary |
| BS ISO 12097-3 | 道路車輛.氣囊零部件.充氣機組件的檢驗 | Road vehicles - Airbag components - Testing of inflator assemblies |
| BS ISO 12103-1 | 道路車輛.過濾器評估用試驗粉塵.第1部分:亞利桑那試驗粉塵 | Road vehicles - Test dust for filter evaluation - Arizona test dust |
| BS ISO 12103-2 | 道路車輛.過濾器評估用試驗粉塵.氧化鋁試驗粉塵 | Road vehicles - Test dust for filter evaluation - Aluminium oxide test dust |
| BS ISO 12140 | 農業機械.農用掛車和拖掛設備.牽引桿插孔 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| BS ISO 12161 | 道路車輛.電動機車和拖車耐制動系統.試驗方法 | Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures |
| BS ISO 12214 | 道路車輛.汽車手控裝置的轉向指示器 | Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
| BS ISO 12353-1 | 道路車輛.交通事故分析.詞匯 | Road vehicles - Traffic accident analysis - Vocabulary |
| BS ISO 12353-2 | 道路車輛.交通事故分析.嚴重沖擊測量法的使用指南 | Road vehicles - Traffic accident analysis - Guidelines for the use of impact severity measures |
| BS ISO 12368 | 農用車輛.牽引車輛上機械掛鉤式連接件.試驗方法和要求 | Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements |
| BS ISO 1275 | 傳動和輸送機用雙節距的精密滾子鏈、連接件和相關的車鏈齒輪 | Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors |
| BS ISO 13041-1 | 數控立式車床和旋轉中心的試驗條件.帶水平工件夾緊軸的機床的幾何試驗 | Test conditions for numeriaclly controlled turning machines and turning centres - Geometric tests for machines with a horizontal workholding spindle |
| BS ISO 13041-4 | 數控立式車床和旋轉中心的試驗條件.平直和旋轉軸定位的精確性和反復性 | Test conditions for numerically controlled turning machines and turning centres - Accuracy and repeatability of positioning of linear and rotary axes |
| BS ISO 13041-6 | 數控立式車床和轉向中心的試驗條件.試樣成品的精確度 | Test conditions for numerically controlled turning machines and turning centres - Accuracy of a finished test piece |
| BS ISO 13041-7 | 數控立式車床和轉向中心的試驗條件.坐標平面上等高線特性評價 | Test conditions for numerically controlled turning machines and turning centres - Evaluation of contouring performance in the coordinate planes |
| BS ISO 13041-8 | 數控立式車床和旋轉中心的試驗條件.熱畸變的評價 | Test conditions for numerically controlled turning machines and turning centres - Evaluation of thermal distortions |
| BS ISO 13215-1 | 道路車輛.降低兒童約束系統的誤用風險.現場學習形式 | Road vehicles - Reduction of misuse risk of child restraint systems - Forms for field studies |
| BS ISO 13215-2 | 道路車輛.減少兒童約束系統的誤用危險.正確裝配的要求和試驗規程(平板法) | Road vehicles - Reduction of misuse risk of child restraint systems - Requirements and test procedures for correct installation (panel method) |
| BS ISO 13215-3 | 道路車輛.減少兒童約束系統的誤用危險.使用誤用模式和效果分析(MMEA)對誤用的預測和評估 | Road vehicles - Reduction of misuse risk of child restraint systems - Prediction and assessment of misuse by misuse mode and effect analysis (MMEA) |
| BS ISO 13216-1 | 道路車輛.兒童約束系統在車內固定點及主固定電的安裝.座椅座面和靠背之間的固定點及其安裝 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Seat bight anchorages and attachments |
| BS ISO 13216-2 | 道路車輛.兒童約束系統在車內的固定點及主固定點的安裝.頂部系留的固定點及其連接 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Top tether anchorages and attachments |
| BS ISO 13216-3 | 道路車輛.固定兒童約束系統用機動車和附屬裝置內的固定方式.兒童約束尺寸和車內空間的分類 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Classification of child restraint dimensions and space in vehicle |
| BS ISO 13218 | 道路車輛.兒童約束系統.有關兒童乘客事故的報告格式 | Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
| BS ISO 13232-1 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.定義、符號和一般考慮 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Definitions, symbols and general considerations |
| BS ISO 13232-2 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.與事故數據相關的碰撞條件定義 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Definition of impact conditions in relation to accident data |
| BS ISO 13232-3 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.摩托車手仿真碰撞假人 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Motorcyclist anthropometric impact dummy |
| BS ISO 13232-4 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.被測量的變量、儀器儀表和測量規程 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Variables to be measured, instrumentation and measurement procedures |
| BS ISO 13232-5 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.傷害指數和風險/利益分析 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Injury indices and risk/benefit analysis |
| BS ISO 13232-6 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.實車碰撞試驗規程 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Full-scale impact-test procedures |
| BS ISO 13232-7 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.實施計算機模擬摩托車碰撞試驗的標準化規 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Standardized procedures for performing computer simulations of motorcycle impact tests |
| BS ISO 13232-8 | 摩托車.適用于摩托車駕駛員防碰撞裝置的研究評價的試驗和分析程序.文件和報告 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Documentation and reports |
| BS ISO 13284 | 叉式裝卸車.叉形臂擴展部分和能自由伸縮的叉形臂.技術特性和強度要求 | Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements |
| BS ISO 13476 | 道路車輛.點火線圈.電氣特性和試驗方法 | Road vehicles - Ignition coils - Electrical characteristics and test methods |
| BS ISO 13486-1 | 道路車輛.液壓制動系統.雙擴口管,螺紋孔,外螺紋接頭和管座 | Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats |
| BS ISO 13556 | 道路車輛.排氣系統泄漏位置的確定和設備規范 | Road vehicles - Localization of exhaust system leaks and equipment specifications |
| BS ISO 13562-1 | 伸縮臂式工業車輛.穩定性試驗 | Industrial variable-reach trucks - Stability tests |
| BS ISO 13562-2 | 伸縮臂式工業車輛.6米及以上長度的貨運集裝箱叉車附加穩定性試驗 | Industrial variable-reach trucks - Additional stability tests for trucks handling freight containers of length 6m and above |
| BS ISO 13563-1 | 單側負載叉車.穩定性試驗 | Single side loading fork-lift trucks - Stability tests |
| BS ISO 13674-1 | 道路車輛.沿中心駕駛的定量試驗.搖擺試驗 | Road vehicles - Test method for the quantification of on-centre handling - Weave test |
| BS ISO 13674-2 | 道路車輛.沿中心駕駛的鑒定試驗方法.搖擺試驗 | Road vehicles - Test method for the quantification of on-centre handling - Transition test |
| BS ISO 13775-1 | 汽車用熱塑管和軟管.非燃料應用 | Thermoplastic tubing and hoses for automotive use - Non-fuel applications |
| BS ISO 13775-2 | 汽車用熱塑管和軟管.石油類燃料用 | Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications |
| BS ISO 13985 | 液態氫.地面車輛燃料箱 | Liquid hydrogen - Land vehicle fuel tanks |
| BS ISO 14229 | 道路車輛.統一診斷設備(UDS).要求和規范 | Road vehicles - Unified diagnostic services (UDS) - Specification and requirements |
| BS ISO 14400 | 道路車輛.輪子和輪輞.使用、一般維護和安全要求及失效條件 | Road vehicles - Wheels and rims - Use, general maintenance and safetyrequi rements and out-of-service conditions |
| BS ISO 14469-3 | 道路車輛.壓縮天然氣(CNG)填充連接器.25 MPa (250 bar)連接器 | Road vehicles - Compressed natural gas (CNG) refuelling connector - 25 MPa (250 bar) connector |
| BS ISO 14508 | 道路車輛.火花塞.終端 | Road vehicles - Spark plugs - Terminals |
| BS ISO 14512 | 乘用車.具有裂口摩擦系數的正向前方地面制動系統.開環試驗方法 | Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| BS ISO 14513 | 道路車輛.行人保護.頭的撞擊試驗方法 | Road vehicles - Pedestrian protection - Head impact test method |
| BS ISO 14572 | 道路車輛.圓形、非屏蔽60V和600V多芯鎧裝電纜.基本和高性能電纜試驗方法和要求 | Road vehicles - Round, screened and unscreened, 60 V and 600 V multi-core sheathed cables - Test methods and requirements for basic and high-performance cables |
| BS ISO 14792 | 道路車輛.重型商用車輛和公共汽車.穩態循環試驗 | Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests |
| BS ISO 14793 | 道路車輛.重型商用車輛和公共汽車.橫向瞬態響應試驗方法 | Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods |
| BS ISO 14794 | 大型商用車輛和客車.轉彎制動.開環試驗方法 | Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods |
| BS ISO 15031-4 | 道路車輛.與排放相關的診斷用車輛和外部設備之間通信.外部試驗設備 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - External test equipment |
| BS ISO 15031-5 | 道路車輛.與排放相關的診斷用車輛和外部設備之間通信.與排放相關的診斷服務 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Emissions-related diagnostic services |
| BS ISO 15031-6 | 道路車輛.車輛和發射相關診斷用外部設備之間的通信.故障診斷編碼定義 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Diagnostic trouble code definitions |
| BS ISO 15037-1 | 道路車輛.車輛動力學試驗方法.乘用車的一般條件 | Road vehicles - Vehicle dynamics test methods - General conditions for passenger cars |
| BS ISO 15037-2 | 道路車輛.車輛動力學試驗方法.重型車輛和公共汽車的一般條件 | Road vehicles - Vehicle dynamics test methods - General conditions for heavy vehicles and buses |
| BS ISO 15403 | 天然氣.作為車輛壓縮燃料使用的天然氣質量牌號 | Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles |
| BS ISO 15794 | 雙向和多向叉車卡車.穩定性試驗 | Bi-directional and multi-directional fork-lift trucks - Stability tests |
| BS ISO 15828 | 道路車輛.車前斜撞試驗規程 | Road vehicles - Offset frontal impact test procedure |
| BS ISO 15829 | 道路車輛.由桿沖擊模擬進行有側面氣囊時乘客互相影響的評價的側面沖擊試驗過程 | Road vehicles - Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation |
| BS ISO 15830-1 | 道路車輛.World SID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.術語學和基本原理 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Terminology and rationale |
| BS ISO 15830-2 | 道路車輛.World SID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.機械子系統 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Mechanical subsystems |
| BS ISO 15830-3 | 道路車輛.World SID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.電子子系統 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Electronic subsystems |
| BS ISO 15830-4 | 道路車輛.World SID 50th percentile側面碰撞(試驗)男性假人的設計和性能規范.用戶手冊 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - User's manual |
| BS ISO 15870 | 工業用機動卡車.安全標志和危險圖示.一般原則 | Powered industrial trucks - Safety signs and hazard pictorials - General principles |
| BS ISO 15871 | 工業用貨車.集裝箱搬運和抓鉤臂操操作指示燈規范 | Industrial trucks - Specification for indicator lights for container handling and grappler arm operations |
| BS ISO 16121-1 | 道路車輛.專用線公共汽車駕駛員工作地點的人體工效學要求.一般描述和基本要求 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - General description, basic requirements |
| BS ISO 16121-2 | 道路車輛.專用線公共汽車駕駛員工作地點的人體工效學要求.能見度 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Visbility |
| BS ISO 16121-3 | 道路車輛.專用線公共汽車駕駛員工作場所的人體工效學要求.信息設備和控制器 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Information devices and controls |
| BS ISO 16121-4 | 道路車輛.專用線公共汽車駕駛員工作地點的人類功效學要求.駕駛室要求 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Cabin environment |
| BS ISO 16183 | 重型機車.未處理排氣的氣體排放測量和瞬變試驗條件下用部分流體稀釋系統測量粒子排放 | Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| BS ISO 16232-1 | 道路車輛.液壓管路部件清潔度.詞匯 | Road vehicles - Cleanliness of components of fluid circuits - Vocabulary |
| BS ISO 16232-10 | 道路車輛.液壓管路部件清潔度.結果表達 | Road vehicles - Cleanliness of components of fluid circuits - Expression of results |
| BS ISO 16232-2 | 道路車輛.液壓管路部件清潔度.攪拌萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by agitation |
| BS ISO 16232-3 | 道路車輛.液壓管路部件清潔度.壓力漂洗萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by pressure rinsing |
| BS ISO 16232-4 | 道路車輛.液壓管路部件清潔度.超聲波技術萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by ultrasonic techniques |
| BS ISO 16232-5 | 道路車輛.液壓管路部件清潔度.在功能試驗臺上萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants on functional test bench |
| BS ISO 16232-6 | 道路車輛.液壓管路部件清潔度.重量分析法測定顆粒質量 | Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis |
| BS ISO 16232-7 | 道路車輛.液壓管路部件清潔度.顯微分析測量粒徑和計數 | Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by microscopic analysis |
| BS ISO 16232-8 | 道路車輛.液壓管路部件清潔度.顯微分析測定顆粒性質 | Road vehicles - Cleanliness of components of fluid circuits - Particle nature determination by microscopic analysis |
| BS ISO 16232-9 | 道路車輛.液壓管路部件清潔度.自動消光顆粒計數器測量粒徑和計數 | Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by automatic light extinction particle counter |
| BS ISO 16234 | 重型商用車輛和客車.具有裂口摩擦系數的正向前方地面制動系統.開環試驗方法 | Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| BS ISO 16246 | 道路車輛.M12 x 1.25帶扁平座和14mm六角的火花塞及其氣缸蓋 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| BS ISO 16247 | 道路車輛.排氣系統泄漏的檢測.氦試驗方法和探測裝置規范 | Road vehicles - Detection of exhaust systems leaks - Helium test method and detection device specification |
| BS ISO 16673 | 道路車輛.運輸信息和控制系統的人類工效學方面.阻塞法評定使用車內系統產生的視覺需求 | Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems |
| BS ISO 16750-1 | 道路車輛.電氣和電氣設備環境條件和試驗.總則 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - General |
| BS ISO 16750-2 | 道路車輛.電氣和電子設備的環境條件和試驗.電負荷 | Road vehicles - Environmental conditions and testing for electrical & electronic equipment - Electrical loads |
| BS ISO 16750-3 | 道路車輛.電氣和電子設備的環境條件和測試.機械載荷 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Mechanical loads |
| BS ISO 16750-4 | 道路車輛.電氣和電子設備的環境條件和試驗.氣候負荷 | Road vehicles - Environmental conditions and testing for electrical & electronic equipment - Climatic loads |
| BS ISO 16833 | 道路車輛.輪子.徑向和側邊跳動的測量 | Road vehicles - Wheels - Measurement of radial and lateral run-out |
| BS ISO 16850 | 道路車輛.行人保護.兒童頭部撞擊試驗方法 | Road vehicles - Pedestrian protection - Child head impact test method |
| BS ISO 16992 | 乘用車輪胎.備用裝置代用設備(SUSE) | Passenger car tyres - Spare unit substitutive equipment (SUSE) |
| BS ISO 1726-2 | 道路車輛.拖拉機和半掛車之間的機械連接.低耦合拖拉機和高容量半掛車之間的互換性 | Road vehicles - Mechanical couplings between tractors and semi-trailers - Interchangeability between low-coupling tractors and high-volume semi-trailers |
| BS ISO 17268 | 壓縮氫路面車輛加添油連接裝置 | Compressed hydrogen surface vehicle refuelling connection devices |
| BS ISO 1728 | 道路車輛.電動車和拖車之間的氣動制動連接器 | Road vehicles - Pneumatic braking connections between motor vehicles and towed vehicles - Interchangeability |
| BS ISO 17288-1 | 乘用車.無級駕駛.操縱斷開回路試驗方法 | Passenger cars - Free-steer behaviour - Steering-release open-loop test method |
| BS ISO 17288-2 | 乘用車.無級變速性能.轉向脈沖開環試驗方法 | Passenger cars - Free-steer behaviour - Steering-pulse open-loop test method |
| BS ISO 17356-2 | 道路車輛.嵌入式機動車裝置用開放式界面.連接OS、COM和NM的OSEK/VDX規范 | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX specifications for binding OS, COM and NM |
| BS ISO 17356-3 | 道路車輛.嵌入式機動車裝置用開放式界面.OSEK/VDX操作系統(OS) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX operating system (OS) |
| BS ISO 17356-4 | 道路車輛.嵌入式機動車裝置用開放式界面.OSEK/VDX通信(COM) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX Communication (COM) |
| BS ISO 17356-5 | 道路車輛.嵌入式機動車裝置用開放式界面.OSEK/VDX網絡管理(NM) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX Network Management (NM) |
| BS ISO 17356-6 | 道路車輛.嵌入式機動車裝置用開放式界面.OSEK/VDX執行語言(OIL) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX implementation language (OIL) |
| BS ISO 17373 | 道路車輛.在低速追尾情況下帶座椅/頭枕設計的車輛的乘客頭部與頸部相互作用評估的滑板碰撞試驗程序 | Road vehicles - Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact |
| BS ISO 17591 | 林業機械.關節式吊桿原木裝車機.識別術語、分類和元件命名 | Machinery for forestry - Knuckleboom log loaders - Identification, terminology, classification and component nomenclature |
| BS ISO 17900 | 農用掛車.平衡半懸掛式掛車.有效載荷、垂直靜載荷和軸向載荷的測定 | Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| BS ISO 18164 | 乘用車、卡車、公共汽車和摩托車輪胎.滾動阻力測量方法 | Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance |
| BS ISO 18207 | 道路車輛.3.5噸以下拖車在疲勞試驗后聯軸節球體用焊接牽引支撐架的控制 | Road vehicles - Trailers up to 3,5 t. Control of welded towing brackets for coupling ball after fatigue testing |
| BS ISO 19072-1 | 道路車輛.點火裝置、兩通和三通連接接口.袋形接口定義 | Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Pocket interface definition |
| BS ISO 19072-2 | 道路車輛.點火裝置、兩通和三通連接接口.試驗方法和一般性能要求 | Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Test methods and general performance requirements |
| BS ISO 19078 | 儲氣瓶.機動車輛用天然氣道上燃料儲氣瓶裝置檢驗和高壓儲氣瓶的合格鑒定 | Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS ISO 1919 | 道路車輛.平底座M14×1.25火花塞及其汽缸蓋外殼 | Road vehicles - M14 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 19472 | 林業機械.絞車.性能要求 | Machinery for forestry - Winches - Dimensions, performance and safety |
| BS ISO 19812 | 道路車輛. M10 x 1型帶16mm六角平座小型火花塞及其汽缸蓋安裝孔 | Road vehicles - M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| BS ISO 19813 | 道路車輛.點火系統.塞頂線圈和筆形線圈上高壓引出線罩用試驗方法和要求 | Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils |
| BS ISO 20176 | 道路車輛.H點機械(HPM II).H點測定的規范和程序 | Road vehicles - H-Point machine (HPM II) - Specifications and Procedure for H-point determination |
| BS ISO 20566 | 色漆和清漆.通過實驗室洗車測定涂層系統的耐劃痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS ISO 20653 | 道路車輛.防護等級(IP代碼).防護電氣設備受外來物、水和通道的破壞 | Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access |
| BS ISO 20683-1 | 飛行器地面設備.帶前起落架的無牽引桿牽引車輛(TLTV)的設計、試驗和維修.干線飛行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Main-line aircraft |
| BS ISO 20683-2 | 航空地面設備.帶前起落架的無牽引桿的牽引車輛(TLTV)的設計、試驗和維護.區域飛行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Regional aircraft |
| BS ISO 20826 | 車載液化石油氣裝置部件.容器 | Automotive LPG components - Containers |
| BS ISO 20828 | 道路車輛.安全認證管理 | Road vehicles - Security certificate management |
| BS ISO 21308-2 | 道路車輛.底盤和車身制造商(BEP)之間的產品數據交換.車體尺寸交換參數 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Dimensional bodywork exchange parameters |
| BS ISO 21750 | 道路車輛.有關增進輪胎充氣壓力監控的安全 | Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoring |
| BS ISO 21848 | 道路車輛.電源電壓42 V的電氣和電子設備.電負載 | Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads |
| BS ISO 21994 | 乘用車.ABS直線制動停車距離.開環試驗方法 | Passenger cars - Stopping distance at straight-line braking with ABS - Open-loop test method |
| BS ISO 22168 | 道路車輛.影響來自光源的光色的覆層保持試驗.試驗方法 | Road vehicles - Holding test of coatings influencing the colour of light emitted by light sources) - Test methods |
| BS ISO 22628 | 道路車輛.可循環和可恢復性.計算方法 | Road vehicles - Recyclability and recoverability - Calculation method |
| BS ISO 22877 | 腳輪和車輪.詞匯、符號和多種語言術語 | Castors and wheels - Vocabulary, symbols and multilingual terminology |
| BS ISO 22896 | 道路車輛.安全系統部署和客車裝備傳感器 | Road vehicles - Deployment and sensor bus for occupant safety systems |
| BS ISO 22902-1 | 道路車輛.車用多媒體接口.通用技術綜述 | Road vehicles - Automotive multimedia interface - General technical overview |
| BS ISO 22902-2 | 道路車輛.車用多媒體接口.使用情況 | Road vehicles - Automotive multimedia interface - Use cases |
| BS ISO 22902-3 | 道路車輛.車用多媒體接口.系統要求. | Road vehicles - Automotive multimedia interface - System requirements |
| BS ISO 22902-4 | 道路車輛.車用多媒體接口.車輛接口信道的網絡協議要求 | Road vehicles - Automotive multimedia interface - Network protocol requirements for vehicle interface access |
| BS ISO 22902-5 | 道路車輛.車用多媒體接口.共用文集 | Road vehicles - Automotive multimedia interface - Common message set |
| BS ISO 22902-6 | 道路車輛.車用多媒體接口.車輛接口設備 | Road vehicles - Automotive multimedia interface - Vehicle interface requirements |
| BS ISO 22902-7 | 道路車輛.汽車多媒體接口.物理規范 | Road vehicles - Automotive multimedia interface - Physical specification |
| BS ISO 22977 | 道路車輛.帶14mm十二角平座及其氣缸蓋的M12x1,25火花塞 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| BS ISO 23273-1 | 燃料電池道路車輛.安全規范.車輛功能安全 | Fuel cell road vehicles - Safety specifications - Vehicle functional safety |
| BS ISO 23273-2 | 燃料電池道路車輛.安全規范.以壓縮氫為車輛燃料的防止氫爆炸的保護 | Fuel cell road vehicles - Safety specifications - Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| BS ISO 23273-3 | 燃料電池道路車輛.安全規范.人員電擊防護 | Fuel cell road vehicles - Safety specifications - Protection of persons against electric shock |
| BS ISO 23274 | 混合動力道路車輛.廢氣排放和燃料消耗測量.非外表可充電車輛 | Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles |
| BS ISO 2328 | 叉車.鉤接式叉形臂和叉形臂托架.安裝尺寸 | Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions |
| BS ISO 2330 | 叉式起重車.叉形臂.技術特性和試驗 | Fork-lift trucks - Fork arms - Technical characteristics and testing |
| BS ISO 2344 | 道路車輛.M14×1.25錐座火花塞及其汽缸蓋外殼 | Road vehicles - M14 x 1,25 spark plugs with conical seating and their cylinder head housings |
| BS ISO 2346 | 道路車輛.帶平底座的19mm六角形的M14×1.25小型火花塞及其汽缸蓋外罩 | Road vehicles - M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| BS ISO 23671 | 乘用車輪胎.測量相對濕度下夾具性能的辦法.負載下的新輪胎 | Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres |
| BS ISO 24134 | 工業用卡車.卡車自動功能附加要求 | Industrial trucks - Additional requirements for automated functions on trucks |
| BS ISO 24347 | 農業車輛.牽引車輛和被牽引車輛之間的機械連接器.測定球形連接裝置(80mm) | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of ball-type coupling device (80 mm) |
| BS ISO 2534 | 道路車輛.發動機試車法規.總功率 | Road vehicles - Engine test code - Gross power |
| BS ISO 2575 | 道路車輛.操縱件、指示器和信號裝置的符號 | Road vehicles - Symbols for controls, indicators and tell-tales |
| BS ISO 2704 | 道路車輛.平底座M10×1火花塞及其汽缸蓋外殼 | Road vehicles - M10 x 1 spark plugs with flat seating and their cylinder head housings |
| BS ISO 2705 | 道路車輛.M12×1.25平座火花塞和汽缸蓋外殼 | Road vehicles - M12 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 2790 | 帶傳動.汽車工業用V帶及帶輪.尺寸 | Belt drives - V-belts for the automotive industry and corresponding pulleys - Dimensions |
| BS ISO 2929 | 油槽車放油用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification |
| BS ISO 3287 | 機動工業貨車.駕駛員控制符號及其它顯示符號 | Powered industrial trucks - Symbols for operator controls and other displays |
| BS ISO 3463 | 農業和林業用拖拉機.翻車防護結構(ROPS).動態試驗方法和驗收條件 | Tractors for agriculture and forestry - Roll-over protective structures (ROPS) - Dynamic test method and acceptance conditions |
| BS ISO 3553-2 | 道路車輛.點火線圈和配電器的高壓連接.第2部分:插頭型 | Road vehicles - High tension connectors for ignition coils and distributors - Plug types |
| BS ISO 362 | 聲學.道路車輛加速的噪音排放測量.工程測量法 | Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method |
| BS ISO 3808 | 道路車輛.無屏蔽高電壓點火電纜.總規范、試驗方法和要求 | Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements |
| BS ISO 3842 | 道路車輛.備用輪.互換性 | Road vehicles - Fifth wheels - Interchangeability |
| BS ISO 3888-1 | 客車.急劇改變車道的操縱用試驗車道.第1部分:兩車道變換 | Passenger cars - Test track for a severe lane-change manoeuvre - Double-lane change |
| BS ISO 3888-2 | 乘用車.車道急劇改變演習用試驗車道.故障免除 | Passenger cars - Test track for a severe lane-change manoeuvre - Obstacle avoidance |
| BS ISO 3894 | 道路車輛.商用車輛的車輪/輪輞.試驗方法 | Road vehicles - Wheels/rims for commercial vehicles - Test methods |
| BS ISO 3911 | 充氣輪胎用車輪和輪輞.詞匯、標識和標記 | Wheels and rims for pneumatic tyres - Vocabulary, designation and marking |
| BS ISO 3929 | 道路車輛.在檢驗或維修過程中廢氣排放量的測量方法 | Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance |
| BS ISO 3984 | 道路車輛.后部移動障礙壁沖擊試驗過程 | Road vehicles - Rear moving barrier impact test procedure |
| BS ISO 4000-1 | 乘用車輪胎和輪輞.輪胎(米制系列) | Passenger car tyres and rims - Tyres (metric series) |
| BS ISO 4000-2 | 乘用車輪胎和輪輞.輪輞 | Passenger car tyres and rims - Rims |
| BS ISO 4008-3 | 道路車輛.噴油泵試驗.應用和試驗程序 | Road vehicles - Fuel injection pump testing - Application and test procedures |
| BS ISO 4020 | 道路車輛.柴油發動機的燃油濾清器.試驗方法 | Road vehicles - Fuel filters for diesel engines.Test methods |
| BS ISO 4138 | 道路車輛.恒速環行駕駛.開環試驗方法 | Passenger cars - Steady-state circular driving behaviour - Open-loop test methods |
| BS ISO 4141-1 | 道路車輛.多芯連接電纜.基本性能鎧裝電纜的試驗方法和要求 | Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables |
| BS ISO 4141-2 | 道路車輛.多芯連接電纜.高性能鎧裝電纜試驗方法和要求 | Road vehicles - Multi-core connecting cables - Test methods and requirements for high performance sheathed cables |
| BS ISO 4141-3 | 道路車輛.多芯連接電纜.非屏蔽鎧裝低壓電纜的結構、尺寸和標記 | Road vehicles - Multi-core connecting cables - Construction, dimensions and marking of unscreened sheathed low-voltage cables |
| BS ISO 4148 | 道路車輛.專用警示信號燈.尺寸 | Road vehicles - Special warning lamps - Dimensions |
| BS ISO 4249-3 | 摩托車輪胎和輪輞(代號規格系列).輪輞 | Motorcycle tyres and rims (code-designated series) - Rims |
| BS ISO 4925 | 道路車輛.液壓系統用非石油基制動液規范 | Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems |
| BS ISO 4926 | 道路車輛.液壓制動系統.非石油基基準液 | Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids |
| BS ISO 4927 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度120℃) | Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.) |
| BS ISO 4928 | 道路車輛.使用非石油基液制動液的液壓制動系統液壓缸的彈性皮碗和密封圈(最高工作溫度120℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| BS ISO 4930 | 道路車輛.非石油基液壓制動液的液壓制動盤式液壓缸用彈性密封墊(最高工作溫度150℃) | Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.) |
| BS ISO 5057 | 工業用卡車.叉式卡車叉桿運行的檢驗和維修 | Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks |
| BS ISO 5130 | 聲學.穩定道路車輛發射聲壓級的測量 | Acoustics - Measurements of sound pressure level emitted by stationary road vehicles |
| BS ISO 5287 | 皮帶傳動.汽車工業用窄V帶.疲勞試驗 | Belt drives - Narrow V-belts for the automotive industry - Fatigue test |
| BS ISO 5692-1 | 農用車輛.拖掛車輛的機械連接裝置.掛接環的尺寸 | Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch-rings |
| BS ISO 5751-1 | 摩托車輪胎和輪輞(米制系列).設計指南 | Motorcycle tyres and rims (metric series) - Design guides |
| BS ISO 5751-2 | 摩托車輪胎和輪輞(米制系列).輪胎尺寸和載荷能力 | Motorcycle tyres and rims (metric series) - Tyre dimensions and load-carrying capacities |
| BS ISO 5751-3 | 摩托車輪胎和輪輞(米制系列).配套輪輞輪廓范圍 | Motorcycle tyres and rims (metric series) - Range of approved rim contours |
| BS ISO 6055 | 工業用貨車.護頂架.規范和試驗 | Industrial trucks - Overhead guards - Specification and testing |
| BS ISO 611 | 道路車輛.機動車輛及其拖車的制動.詞匯 | Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary |
| BS ISO 6117 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度100℃) | Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.) |
| BS ISO 6118 | 道路車輛.使用非石油基制動液的液壓制動促動缸的彈性皮碗和密封圈(最高工作溫度70℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.) |
| BS ISO 6155 | 機床.臥式主軸六角自動車床和臥式單軸自動車床的試驗條件.精度試驗 | Machine tools - Test conditions for horizontal spindle turret and single spindle automatic lathes - Testing of the accuracy |
| BS ISO 6292 | 機動工業用卡車和牽引車.制動性能和部件強度 | Powered industrial trucks and tractors - Brake performance and component strength |
| BS ISO 6452 | 橡膠或塑料涂層織物.汽車內裝飾材料霧氣凝結特征的測定 | Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles |
| BS ISO 6460-1 | 摩托車.廢氣排放和燃料消耗的測量方法.一般試驗要求 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - General test requirements |
| BS ISO 6460-2 | 摩托車.廢氣排放和燃料消耗測量方法.試驗車和特殊試驗條件 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Test cycles and specific test conditions |
| BS ISO 6460-3 | 摩托車.廢氣排放和燃料消耗測量方法.恒速下的燃料消耗測量 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed |
| BS ISO 6489-1 | 農用車輛.牽引車和拖車間的機械連接.掛勾尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of hitch-hooks |
| BS ISO 6489-2 | 農用車輛.被牽引和牽引車輛間的機械連接裝置.第2部分:40號 U型鉤接頭的規范 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Specifications for clevis coupling 40 |
| BS ISO 6489-3 | 農用車輛.被牽引和牽引車之間的機械連接裝置.拖拉機牽引桿 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Tractor drawbar |
| BS ISO 6489-4 | 農用車輛.被牽引與牽引車之間的機械連接裝置.測定楔式耦合尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of piton-type coupling |
| BS ISO 6518-1 | 道路車輛.點火系統.詞匯 | Road vehicles - Ignition systems - Vocabulary |
| BS ISO 6550-3 | 道路車輛.帶錐形座和汽缸蓋罩的鎧裝加熱塞.第3部分:M10加熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs |
| BS ISO 6550-4 | 道路車輛.帶錐座封閉型電熱塞及其汽缸蓋安裝孔尺寸.M8 x 1電熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M8 x 1 glow-plugs |
| BS ISO 6722 | 道路車輛.60V和600V單芯電纜.尺寸、試驗方法和要求 | Road vehicles - 60 V and 600 V single-core cables - Dimensions, test methods and requirements |
| BS ISO 6813 | 道路車輛.碰撞分類.術語 | Road vehicles - Collision classification - Terminology |
| BS ISO 6856 | 道路車輛.非屏蔽高壓點火電纜組件.試驗方法和一般要求 | Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements |
| BS ISO 6969 | 道路車輛.聲音信號設備.車輛安裝后的試驗 | Road vehicles - Sound signalling devices - Tests after mounting on vehicle |
| BS ISO 7132 | 土方機械.自動傾卸車.術語和商業規范 | Earth-moving machinery - Dumpers - Terminology and commercial specifications |
| BS ISO 7141 | 道路車輛.輕合金輪.碰撞試驗 | Road vehicles - Light alloy wheels - Impact test |
| BS ISO 7176-21 | 輪椅.電動輪椅和小型摩托車電磁兼容性的要求和試驗方法 | Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
| BS ISO 7176-4 | 輪椅.理論測距用電動輪椅和踏板車的能耗 | Wheelchairs - Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
| BS ISO 7401 | 道路車輛.橫向瞬態響應的試驗方法.開路試驗法 | Road vehicles - Lateral transient response test methods - Open-loop test methods |
| BS ISO 7588-1 | 道路車輛.電氣/電子開關設備.繼電器和閃光器 | Road vehicles - Electrical/electronic switching devices - Relays and flashers |
| BS ISO 7588-2 | 道路車輛.電氣/電子開關設備.第2部分:電子設備 | Road vehicles - Electrical/electronic switching devices - Electronic devices |
| BS ISO 7588-3 | 道路車輛.電氣/電子開關設備.微繼電器 | Road vehicles - Electrical/electronic switching devices - Microrelays |
| BS ISO 7634 | 道路車輛.壓縮空氣制動系統.試驗程序 | Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures |
| BS ISO 7635 | 道路車輛.包括電控功能的機動車輛用氣壓或氣動/液壓制動系統.試驗規程 | Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures |
| BS ISO 7637-3 | 道路車輛.傳導和耦合引起的電干擾.通過電容耦合和電感耦合經由非電源線線路的瞬間電傳輸 | Road vehicles - Electrical disturbances from conduction and coupling - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| BS ISO 7654 | 道路車輛.柴油發動機用離心式燃油過濾器.安裝和連接尺寸 | Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| BS ISO 7859 | 機動腳踏兩用車.燃料消耗量的測量 | Mopeds - Fuel consumption measurements |
| BS ISO 7862 | 道路車輛.通過模擬前面碰撞評價約束系統的滑板碰撞試驗規程 | Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions |
| BS ISO 8066-2 | 汽車空調器用橡膠和塑料軟管及軟管配件.規范.冷卻劑134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Refrigerant 134a |
| BS ISO 8178-11 | 往復式內燃機.廢氣排放測量.瞬態試驗條件下非道路車輛排氣和顆粒排放量現場測量 | Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| BS ISO 8349 | 道路車輛.測量道路表面摩擦力 | Road vehicles - Measurement of road surface friction |
| BS ISO 8379 | 越野卡車.穩定性試驗 | Industrial trucks - Rough terrain trucks - Stability tests |
| BS ISO 8470 | 道路車輛.六角對邊16mm的M14×1.25平座火花塞及其氣缸蓋安裝孔 | Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| BS ISO 8705 | 機動腳踏兩用車.重心位置的測量方法 | Mopeds - Measurement methods for location of centre of gravity |
| BS ISO 8789 | 機動車輛運送石油液化氣用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| BS ISO 8820-2 | 道路車輛.熔斷器.用戶指南 | Road vehicles - Fuse-links - User's guide |
| BS ISO 8820-5 | 道路車輛.熔斷體.SF 30和SF 51類型的帶軸向引線的熔斷體(帶狀熔斷體)和試驗裝置 | Road vehicles - Fuse-links - Fuse-links with axial terminals (strip fuse-links) types SF 30 and SF 51 and test fixtures |
| BS ISO 8820-6 | 道路車輛.熔斷體.單螺栓熔斷體 | Road vehicles - Fuse-links - Single-bolt fuse-links |
| BS ISO 8820-7 | 道路車輛.熔斷體.:額定電壓為450V帶焊片(G型)的熔斷體 | Road vehicles - Fuse-links - Fuse-links with tabs (Type G) with rated voltage of 450 V |
| BS ISO 8936 | 休閑旅居車輛用遮篷.要求和試驗方法 | Awnings for leisure accommodation vehicles - Requirements and test methods |
| BS ISO 9128 | 道路車輛.制動液類型圖形符號 | Road vehicles - Graphical symbols to designate brake fluid types |
| BS ISO 9130 | 摩托車.重心位置的測量方法 | Motorcycles - Measurement method for location of centre of gravity |
| BS ISO 9633 | 自行車鏈條.特性和試驗方法 | Cycle chains - Characteristics and test methods |
| BS ISO 9815 | 道路車輛.乘用車和掛車列車.橫向穩定性試驗 | Road vehicles - Passenger-car and trailer combinations - Lateral stability test |
| BS ISO 9816 | 乘用車.車輛轉彎時的停車反作用力.開環試驗方法 | Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method |
| BS ISO 9981 | 帶傳動.汽車工業用帶輪和V型楔帶.PK輪廓:尺寸 | Belt drives - Pulleys and V-ribbed belts for the automotive industry - PK profile:dimensions |
| BS ISO2790 | 皮帶傳動.汽車工業及相應皮帶輪用V形皮帶.尺寸 | Belt drives - V-belts for the automotive industry and corresponding pulleys - Dimensions |
| BS M 73 | 航空.自動推進式廁所服務車.功能要求 | Aircraft - Self-propelled lavatory-servicing vehicle - Functional requirements |
| BS M 77 | 自動推進式除冰/防冰車輛.功能要求 | Self-propelled de-icing/anti-icing vehicles - Functional requirements |
| BS M 87 | 航空地面支持設備.大容量飛機用供膳車.功能要求 | Aircraft ground support equipment - Catering vehicle for large capacity aircraft - Functional requirements |
| BS MA 47 | 船舶用吊貨滑車實施規程 | Code of practice for ships' cargo blocks |
| BS PAS 125 | 汽車保養.車身修理.規范 | Automotive services - Vehicle body repair - Specification |
| BS PAS 43 | 車輛拆卸、回收和移動操作的安全工作.管理系統規范 | Safe working of vehicle breakdown, recovery and removal operations - Management system specification |
| BS PAS 68 | 機動車防撞圍欄的規范 | Specification for vehicle security barriers |
| BS PAS 69 | 機動車防撞圍欄安裝和規范指南 | Guidelines for the specification and installation of vehicle security barriers |
| BS PAS 80 | 汽車修理車間服務.車輛保養和維修.技術服務和客戶服務.規范 | Automotive garage services - Service and repair of vehicles - Technical and customer service - Specification |
| BS PAS 90 | 工業貨車現場保養和維修安全操作實施規范 | Specification for safe working practice for on-site maintenance and repair of industrial trucks |
| DD 203-1 | 工業自動化.車間地板生產.第1部分:標準化基準模型和標記要求方法 | Industrial automation: shop floor production. Reference model for standardization and a methodology for identification of requirements |
| DD 203-2 | 工業自動化:車間生產.標準化和方法學基準模型的應用 | Industrial automation: shop floor production. Application of the reference model for standardization and methodology |
| DD 235 | 車載式信息系統導則 | Guide to in-vehicle information systems |
| DD ENV 12694 | 公共運輸.道路車輛.可變電子外部信號標志的尺寸要求 | Public transport. Road vehicles. Dimensional requirements for variable electronic external signs |
| DD ENV 13093 | 公共運輸.道路車輛.駕駛員儀表盤機械界面要求.最低顯示及鍵盤參數 | Public transport. Road vehicles. Driver's console mechanical interface requirements. Minimum display and keypad parameters |
| DD ENV 13149-1 | 公共運輸.道路車輛調度安排和控制系統.車上數據傳輸?shù)?WORLDFIP 定義和應用規則 | Public transport. Road vehicle scheduling and control systems. WORLDFIP definition and application rules for onboard data transmission |
| DD ENV 13149-2 | 公共運輸.道路車輛調度安排和控制系統.WORLDFIP敷設電纜規范 | Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications |
| DD ENV 13563 | 交通控制設備.車輛探測器 | Traffic control equipment. Vehicle detectors |
| DD ENV ISO 14815 | 道路運輸和交通遠程信息處理技術.自動車輛和設備識別.系統規范 | Road transport and traffic telematics. Automatic vehicle and equipment identification. System specification |
| DD ENV ISO 14816 | 道路運輸和交通遠程信息處理技術.自動車輛和設備識別.編號和數據結構 | Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structures |
| PD 6634-2 | 車輛約束系統.高速公路約束系統基礎原理 | Vehicle restraint systems. Fundamentals of highway restraint systems |
| PD 6634-5 | 車輛約束系統.路障轉換和終端設置 | Vehicle restraint systems. Development of barrier transitions and terminals |
| PD 6634-6 | 車輛約束系統.路沿防撞設施.撞擊衰減裝置 | Vehicle restraint systems. Crashworthy roadside features. Impact attenuators |
| PD IEC TR 60721-4-5 | 環境條件分類.IEC 60721-3的環境條件等級與IEC 60068的環境試驗的相互關系和換算導則.地面車輛裝置 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Ground vehicle installations |
| QGN/95008 | 汽車工業質量管理體系應用BS EN ISO 9002標準的指南注釋 | Guidance notes on the application of BS EN ISO 9002 for quality management systems in the automotive industry |
| QSP/6510/92001 | 舊車銷售質量管理體系應用BS EN ISO 9002標準規范 | Specification for the application of BS EN ISO 9002 to quality management systems relating to the sale of used vehicles |
| TH 42043 | 機動車及設備.EC、ECE和國家批準方案應用的國際指南 | Motor Vehicles and Equipment - An international guide to the application of EC, ECE and national approval schemes |
| 編號 | 中文名稱 | 英文名稱 |