微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60601-2-22 | 醫用電氣設備 第2-22部分:診斷和治療用激光設備安全的特殊要求 | Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment |
| IEC 60747-5-4 | 半導體器件.分立器件.第5-4部分:光電器件.半導體激光器 | Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices - Semiconductor lasers |
| IEC 60825-1 AMD 1 | 激光產品的安全 第1部分:設備分類、要求和用戶指南 修改1 | Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 1 |
| IEC 60825-1 AMD 2 Corrigendum 1 | 激光產品的安全.第1部分:設備分類、要求和用戶指南.修改件2 | Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2 |
| IEC 60825-1 AMD 2 | 激光產品的安全 第1部分:設備分類、要求和用戶指南 修改2 | Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2 |
| IEC 60825-1 Edition 1.2 | 激光產品的安全.第1部分:設備分類、要求和用戶指南 | Safety of laser products - Part 1: Equipment classification, requirements and user's guide |
| IEC 60825-1 | 激光產品的安全 第1部分:設備分類、要求和用戶指南 | Safety of laser products; part 1: equipment classification, requirements and user's guide |
| IEC 60825-12 | 激光產品的安全.第12部分:用于信息傳輸?shù)淖杂煽臻g光通信系統的安全 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| IEC 60825-2 | 激光產品的安全.第2部分:光纖通信系統的安全(OFCS) | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC 60825-4 | 激光產品的安全.第4部分:激光防護器 | Safety of laser products - Part 4: Laser guards |
| IEC 60856 AMD 1 | 預錄光學反射視盤系統 “激光視盤” 50Hz/625行 PAL制 修改1 | Pre-recorded optical reflective videodisk system; "laser vision" 50 Hz/625 lines; PAL; amendment 1 |
| IEC 60856 AMD 2 | 預錄光學反射視盤系統 “激光視盤” 50Hz/625行 PAL制 修改2 | Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL; Amendment 2 |
| IEC 60856 | 預錄光學反射視盤系統 “激光視盤” 50Hz/625行 PAL制 | Pre-recorded optical reflective videodisk system. "Laser vision" 50 Hz/625 lines - PAL |
| IEC 60857 AMD 1 | 預錄光學反射視盤系統 “激光視盤” 60Hz/525行 M/NTSC制 修改1 | Pre-recorded optical reflective videodisk system; "laser vision" 60 Hz/525 lines; M/NTSC; amendment 1 |
| IEC 60857 AMD 2 | 預錄光學反射視盤系統 “激光視盤” 60Hz/525行 M/NTSC制 修改2 | Pre-recorded optical reflective videodisk system - "Laser vision" 60 Hz/525 lines - M/NTSC; Amendment 2 |
| IEC 60857 | 預錄光學反射視盤系統 “激光視盤” 60Hz/525行 M/NTSC制 | Pre-recorded optical reflective videodisk system. "Laser vision" 60 Hz/525 lines - M/NTSC |
| IEC 61040 | 激光輻射用功率和能量測量探測器、儀器和設備 | Power and energy measuring detectors, instruments and equipment for laser radiation |
| IEC 61096 AMD 1 | 數字音頻激光唱盤重放設備特性的測量方法 修改1 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1 |
| IEC 61096 | 數字音頻激光唱盤重放設備特性的測量方法 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs |
| IEC 61280-1-4 | 纖維光學通信子系統試驗程序.第1-4部分:一般通信子系統.多模纖維激光發射機用二維近場數據的采集和換算 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters |
| IEC 61280-2-10 | 纖維光學通信子系統試驗程序.第2-10部分:數字系統.激光發射器的時間分辨線性調頻脈沖和α指數測量 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| IEC 61751 | 通信用激光模塊 可靠性評定 | Laser modules used for telecommunication - Reliability assessment |
| IEC 62107 | 高級激光視盤 光盤交換系統 規范 | Super Video Compact Disc - Disc-interchange system-specification |
| IEC 62148-11 | 光纖有源元件及器件.包裝和接口標準.第11部分:14針調制器集成激光二極管發射機 | Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters |
| IEC 62148-12 | 纖維光學有源元件和器件.包裝和接口標準.第12部分:帶同軸RF連接器的激光傳輸器 | Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector |
| IEC 62149-3 | 纖維光學有源元件和器件.性能標準.第3部分:2.5Gbit/s調制器-集成激光二極管發射機 | Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters |
| IEC/TR 60825-10 | 激光制品的安全性.第10部分:IEC 60825-1的應用導則和注釋 | Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1 |
| IEC/TR 60825-13 | 激光產品的安全.第13部分:激光產品分類測量 | Safety of laser products - Part 13: Measurements for classification of laser products |
| IEC/TR 60825-14 | 激光產品安全.第14部分:使用者指南 | Safety of laser products - Part 14: A user's guide |
| IEC/TR 60825-5 | 激光產品安全性.第5部分:IEC 60825-1的制造商檢查清單 | Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1 |
| IEC/TR 60825-8 | 激光產品的安全 第8部分:醫療激光設備安全使用指南 | Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment |
| IEC/TR 60825-9 | 激光產品的安全 第9部分:非相干光輻射最大允許曝光量的匯集 | Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation |
| IEC/TR3 60825-3 | 激光產品的安全 第3部分:激光顯示器和指示器指南 | Safety of laser products - Part 3: Guidance for laser displays and shows |
| ISO 10110-17 | 光學和光學儀器.光學元件和系統制圖準備.第17部分:激光輻射損害閾 | Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold |
| ISO 11145 | 光學和光子學.激光和激光設備.詞匯和符號 | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols |
| ISO 11146-1 | 激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第1部分:無象散和簡單象散束 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams |
| ISO 11146-2 | 激光和激光相關設備.激光束寬度、發散角和束擴散率的試驗方法.第2部分:一般像散束 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams |
| ISO 11151-1 | 激光和激光設備 標準光學元件 第1部分:紫外線、可見和近紅外光譜范圍用元件 | Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges |
| ISO 11151-2 | 激光和激光設備 標準光學元件 第2部分:紅外光譜范圍用元件 | Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range |
| ISO 11252 | 激光和激光設備.激光裝置.對文件的最低要求 | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation |
| ISO 11254-1 | 激光和激光設備 光學表面激光導致?lián)p傷閾值的測定 第1部分:1-on-1試驗 | Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test |
| ISO 11254-2 | 激光器和激光相關設備 激光導致光學表面損傷閾值的確定 第2部分：S-on-1 試驗 | Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test |
| ISO 11551 | 光學和光學儀器.激光和激光設備.光學激光組件光吸收性試驗方法 | Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components |
| ISO 11553-1 | 機械安全.激光加工機械.第1部分:一般安全要求 | Safety of machinery - Laser processing machines - Part 1: General safety requirements |
| ISO 11554 | 光學和光子學.激光和激光設備.激光束功率、能量和時間特征的試驗方法 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics |
| ISO 11670 Technical Corrigendum 1 | 激光和激光相關設備.激光束參數的試驗方法.束位置穩定性.技術勘誤1 | Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability; Technical Corrigendum 1 |
| ISO 11670 | 激光和激光設備.激光束參數的試驗方法.束定位穩定性 | Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability |
| ISO 11810-1 | 激光和激光相關設備.手術布單和/或病人保護覆蓋物耐激光性的試驗方法和分類.第1部分:基本點燃和穿透性 | Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration |
| ISO 11990 | 光學和光學儀器.激光和激光設備.氣管柄激光抗性的測定 | Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts |
| ISO 12005 | 激光和激光設備.激光束參數的試驗方法.偏振 | Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization |
| ISO 13320-1 | 粒度分析 激光衍射法 第1部分:一般原則 | Particle size analysis - Laser diffraction methods - Part 1: General principles |
| ISO 13694 Technical Corrigendum 1 | 光學和光學儀器.激光和激光設備.激光束能量密度分布的試驗方法.技術勘誤1 | Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1 |
| ISO 13694 | 光學和光學儀器 激光和激光設備 激光束能量密度分布的試驗方法 | Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution |
| ISO 13695 | 光學和光子學.激光及其相關設備.激光光譜特性的試驗方法 | Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers |
| ISO 13697 | 光學和光子學.激光和激光相關的設備.光學激光元件的鏡面反射率和正透視度的試驗方法 | Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components |
| ISO 13919-1 | 焊接 電子束和激光焊接頭 缺陷的質量分級指南 第1部分:鋼 | Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel |
| ISO 13919-2 | 焊接 電子束和激光束焊接接頭 缺陷質量等級指南 第2部分：鋁及其可焊合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys |
| ISO 14408 | 激光手術用氣管掐管.標識及附帶信息要求 | Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information |
| ISO 15367-1 | 激光及激光相關設備.激光束波前形狀測定用試驗方法.第1部分:術語和基礎領域 | Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects |
| ISO 15367-2 | 激光及激光相關設備.激光束波前形狀測定用試驗方法.第2部分:Shack-Hartmann傳感器 | Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors |
| ISO 15609-4 | 金屬材料的焊接程序規范和鑒定.焊接程序規范.第4部分:激光束焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding |
| ISO 15614-11 | 金屬材料焊接程序的規范和鑒定.焊接程序試驗.第11部分:電子和激光束焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding |
| ISO 15616-1 | 高質量焊接和切割用CO2激光射線機的驗收試驗.第1部分:通用原理和驗收條件 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions |
| ISO 15616-2 | 高質量焊接和切割用CO2激光射線機的驗收試驗.第2部分:靜態和動態準確度的測定 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy |
| ISO 15616-3 | 高質量焊接和切割用CO2激光射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure |
| ISO 16063-11 | 振動與沖擊傳感器的校準方法 第11部分:激光干涉法作主要的振動校準 | Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry |
| ISO 16063-13 | 振動和沖擊傳感器的校準方法 第13部分：用激光干涉法的基本校準 | Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry |
| ISO 17123-6 | 光學和光學儀器.大地測量和測繪儀器的現場試驗規程.第6部分:旋轉激光器 | Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers |
| ISO 17526 | 光學和光學儀器.激光器和激光相關設備.激光器的使用壽命 | Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers |
| ISO 17658 | 焊接.氧氣火焰切割、激光束切割和等離子體切割的缺陷 | Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology |
| ISO 18755 | 細陶瓷(高級陶瓷、高級工業陶瓷).用激光閃光法測定塊體陶瓷的熱擴散 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method |
| ISO 22826 | 金屬材料焊縫的破壞性試驗.激光和電子束焊接窄接頭的硬度試驗(維氏和努氏硬度試驗) | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| ISO 22827-1 | Nd:YAG激光射線焊接機器的加速試驗.帶光纖傳送的機器.第1部分:激光裝配 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly |
| ISO 22827-2 | Nd:YAG激光射線焊接機器的加速試驗.帶光纖傳送的機器.第2部分:移動裝置 | Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism |
| ISO 2971 | 卷煙和過濾嘴 公稱直徑的測定 使用激光束測量儀的方法 | Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus |
| ISO 6161 | 個人用護目鏡 防激光輻射的濾光鏡和護目鏡 | Personal eye-protectors; Filters and eye-protectors against laser radiation |
| ISO 8130-13 | 粉末涂料 第13部分：采用激光衍射的粒度分析 | Coating powders - Part 13: Particle size analysis by laser diffraction |
| ISO/TR 11146-3 Technical Corrigendum 1 | 激光和激光相關設備.激光束寬度、發散角度和束擴散率的試驗方法.第3部分:本征的和幾何的激光束分類、擴散和 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods; Technical Corrigendum 1 |
| ISO/TR 11146-3 | 激光和激光相關設備.激光束寬度、發散角度和束擴散率.第3部分:內在和幾何激光束分類、擴散和試驗方法細節 | Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods |
| ISO/TR 11552 | 激光和激光設備 激光材料處理機械 性能規范和金屬材料切削基準 | Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals |
| ISO/TR 11991 | 上呼吸道激光手術中通氣管理指南 | Guidance on airway management during laser surgery of upper airway |
| ISO/TR 17671-6 | 焊接.金屬材料焊接建議.第6部分:激光束焊接 | Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding |
| ISO/TR 22588 | 光學和光子學.激光和激光相關設備.激光光學元件感應吸收效應的測量和評估 | Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components |
| ISO/TS 17477 | 使用2維移動光學型激光器的焊接和切割用CO2激光束機器的驗收試驗 | Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type |
| 編號 | 中文名稱 | 英文名稱 |