微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10124 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 層狀缺陷檢測用超聲檢驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections |
| ISO 10332 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 驗證液壓防泄漏用超聲波檢驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness |
| ISO 10543 | 壓力用無縫及熱拉伸焊接鋼管 全周邊超聲波厚度檢測 | Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing |
| ISO 10763 | 液壓傳動 端面平齊的無縫和焊接型精密鋼管 尺寸及標稱工作壓力 | Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures |
| ISO 11120 | 氣瓶 150升～3000升水容量的可重復充裝無縫鋼管氣瓶 設計、結構和試驗 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing |
| ISO 1127 | 不銹鋼管 尺寸、公差和單位長度的公稱質量 | Stainless steel tubes; dimensions, tolerances and conventional masses per unit length |
| ISO 1129 | 鍋爐、過熱器和熱交換器用鋼管 尺寸、公差和單位常用重量 | Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length |
| ISO 11484 | 壓力用途鋼管 無損檢驗人員的資格及認證 | Steel tubes for pressure purposes - Qualification and certification of non-destructive testing (NDT) personnel |
| ISO 11496 | 壓力用途的承壓無縫和焊接鋼管 層間不完整性檢查的管端超聲波檢測 | Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections |
| ISO 11960 Technical Corrigendum 1 | 石油和天然氣工業.油井套管或油管用鋼管.技術勘誤1 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1 |
| ISO 11960 | 石油和天然氣工業.油井套管和油管用鋼管 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells |
| ISO 11961 | 石油和天然氣工業 鉆井桿用鋼管 規范 | Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification |
| ISO 12094 | 壓力用途的承壓焊接鋼管 焊接鋼管用鋼帶/鋼板分層缺陷檢測用超聲波試驗 | Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
| ISO 12095 | 壓力用途的承壓無縫和焊接鋼管 液體滲透試驗 | Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing |
| ISO 12096 | 壓力用途的承壓埋弧焊接鋼管 焊縫缺陷檢測用X射線檢查 | Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections |
| ISO 13663 | 壓力用途的承壓焊接鋼管 焊縫周圍分層缺陷檢測用超聲波試驗 | Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections |
| ISO 13664 | 壓力用途的承壓無縫和焊接鋼管 管端分層組織缺陷探測用磁粉檢驗 | Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections |
| ISO 13665 | 壓力用途的承壓無縫和焊接鋼管 管身表面缺陷探測用磁粉檢驗 | Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections |
| ISO 13680 Technical Corrigendum 2 | 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件.技術勘誤2 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2 |
| ISO 13680 | 石油和天然氣工業 用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
| ISO 15741 | 色漆和清漆 海上和近海的非腐蝕氣體鋼管內側的減小摩擦涂層 | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases |
| ISO 16172 | 波紋鋼管用連續熱浸金屬涂層鋼板 | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
| ISO 2037 | 食品工業用不銹鋼管 | Stainless steel tubes for the industry |
| ISO 2937 | 機械用光端無縫鋼管 | Plain end seamless steel tubes for mechanical application |
| ISO 3183 | 石油和天然氣工業.管道運輸系統用鋼管 | Petroleum and natural gas industries - Steel pipe for pipeline transportation systems |
| ISO 3183-3 Technical Corrigendum 1 | 石油和天然氣工業.管道鋼管.交貨技術條件.第3部分:C級鋼管的要求.技術勘誤1 | Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1 |
| ISO 3304 | 光端精密無縫鋼管 交貨技術條件 | Plain end seamless precision steel tubes; Technical conditions for delivery |
| ISO 3305 | 光端焊接精密鋼管 交貨技術條件 | Plain end welded precision steel tubes; Technical conditions for delivery |
| ISO 3306 | 焊后定徑光端精密鋼管 交貨技術條件 | Plain end as-welded and sized precision steel tubes; Technical conditions for delivery |
| ISO 3545-1 | 鋼管和管件 規范中使用的符號 第1部分:圓形截面的管和管狀附件 | Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section |
| ISO 3545-2 | 鋼管和管件 規范中使用的符號 第2部分:正方形和矩形中空截面 | Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections |
| ISO 3545-3 | 鋼管和管件 規范中使用的符號 第3部分:圓形截面管件 | Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section |
| ISO 4200 | 光端焊接和無縫鋼管 管的尺寸和單位長度重量的一覽表 | Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length |
| ISO 4394-1 | 流體傳動系統和元件.缸筒.第1部分:對特殊精加工內徑的鋼管的要求 | Fluid power systems and components-- Cylinder barrels; Part 1 : Requirements for steel tubes with specially finished bores |
| ISO 5252 | 鋼管 公差系列 | Steel tubes; tolerance systems |
| ISO 5256 | 地下或水下管路用鋼管和管件 管內外涂瀝青或瀝青油衍生物 | Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials |
| ISO 5625 | 造船 鋼管管路法蘭焊接通艙管 PN6、PN10和PN16 | Shipbuilding; Welded bulkhead pieces with flanges for steel pipework; PN 6, PN 10 and PN 16 |
| ISO 65 | 按照ISO 7/1 車螺紋的碳素鋼管 | Carbon steel tubes suitable for screwing in accordance with ISO 7/1 |
| ISO 6758 | 熱交換器用焊接鋼管 | Welded steel tubes for heat exchangers |
| ISO 6759 | 熱交換器用無縫鋼管 | Seamless steel tubes for heat exchangers |
| ISO 6761 | 鋼管 焊接用管端和配件的預處理 | Steel tubes; Preparation of ends of tubes and fittings for welding |
| ISO 7598 | 適于按照ISO 7/1車螺紋用不銹鋼管 | Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
| ISO 8535-1 | 柴油發動機.高壓噴射燃油管用鋼管.第1部分:無縫冷拉制單壁鋼管的要求 | Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes |
| ISO 8535-2 | 壓燃式發動機.高壓燃油噴管用鋼管.第2部分:組合管的要求 | Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes |
| ISO 9095 | 鋼管 鑒別材料用連續符號標志和顏色碼 | Steel tubes; continuous character marking and colour coding for material identification |
| ISO 9302 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 液壓密封驗證電磁試驗法 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness |
| ISO 9303 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測縱向缺陷用全周邊超聲波試驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections |
| ISO 9304 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測缺陷用渦流電流試驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections |
| ISO 9305 | 壓力用途的無縫鋼管 橫向缺陷全周邊超聲電流檢驗 | Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections |
| ISO 9329-1 | 壓力用途的無縫鋼管 交貨技術條件 第1部分:規定室溫性能的非合金鋼 | Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties |
| ISO 9329-2 | 壓力用途的無縫鋼管 交貨技術條件 第2部分:規定高溫性能的非合金鋼和合金鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
| ISO 9329-3 | 壓力用途的無縫鋼管 交貨技術條件 第3部分:規定低溫性能的非合金鋼和合金鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties |
| ISO 9329-4 | 壓力用途的無縫鋼管 交貨技術條件 第4部分:奧氏體不銹鋼 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels |
| ISO 9330-1 | 壓力用途的焊接鋼管 交貨技術條件 第1部分:規定室溫性能的非合金鋼管 | Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties |
| ISO 9330-2 | 壓力用途的焊接鋼管 交貨技術條件 第2部分:規定高溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| ISO 9330-3 | 壓力用途的焊接鋼管 交貨技術條件 第3部分:規定低溫性能的電阻焊接和感應焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
| ISO 9330-4 | 壓力用途的焊接鋼管 交貨技術條件 第4部分:規定高溫性能的埋弧焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
| ISO 9330-5 | 壓力用途的焊接鋼管 交貨技術條件 第5部分:規定低溫性能的埋弧焊接非合金鋼管和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
| ISO 9330-6 | 壓力用途的焊接鋼管 交貨技術條件 第6部分:奧氏體不銹鋼管的焊接長度 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes |
| ISO 9402 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 檢測縱向缺陷用鐵磁鋼管全周邊磁轉換/磁鏈試驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections |
| ISO 9455-12 | 軟釬焊劑 試驗方法 第12部分:鋼管腐蝕試驗 | Soft soldering fluxes; test methods; part 12: steel tube corrosion test |
| ISO 9598 | 壓力用途的無縫鋼管 檢測橫向缺陷用鐵磁鋼管全周邊磁轉換/磁鏈試驗 | Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
| ISO 9764 | 壓力用途的電阻焊和感應焊鋼管 焊縫的縱向缺陷超聲波檢驗 | Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections |
| ISO 9765 | 壓力用途的埋弧焊鋼管 焊縫的縱向和/或橫向缺陷超聲波檢測 | Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections |
| 編號 | 中文名稱 | 英文名稱 |