微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1600 | 石油工業用鋼管尺寸規范 | Specification for dimensions of steel pipe for the petroleum industry |
| BS 1640-1 | 石油工業用鋼對焊管管件規范.第1部分:鍛制碳鋼與鐵素體合金鋼管件 | Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings |
| BS 1640-4 | 石油工業用鋼對焊管管件規范.第4部分:鍛造和鑄造奧氏體鉻鎳鋼管件:米制單位 | Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units |
| BS 1717 | 自行車和摩托車用鋼管規范 | Specification for steel tubes for cycle and motor cycle purposes |
| BS 2633 | 輸送流體用鐵素體鋼管道工程的一級電弧焊規范 | Specification for Class I arc welding of ferritic steel pipework for carrying fluids |
| BS 2971 | 輸送流體用碳鋼管道二級電弧焊規范 | Specification for class II arc welding of carbon steel pipework for carrying fluids |
| BS 2T 57 | 4/1鎳-鉻鋼管材規范(1150 N/mm<上標2>) | Specification for 4/1 nickel-chromium steel tube (1150 N/mm2) |
| BS 2T 66 | 19/10鉻-鎳耐腐蝕鋼管材規范(鈮穩定的:550MPa)(可焊接) | Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable) |
| BS 2T 68 | 冷拉18/10鉻-鎳耐腐蝕鋼管材規范(鈮穩定的:800MPa)(可焊接) | Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable) |
| BS 3293 | 石油工業用碳素鋼管法蘭(標稱尺寸24英寸以上)規范 | Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry |
| BS 3604-2 | 承壓鋼管.具有規定高溫特性的鐵合金鋼.第2部分:縱向電弧焊接管規范 | Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes |
| BS 3799 | 石油工業用鋼管配件、螺旋管接頭和套管焊接規范 | Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry |
| BS 3868 | 預制排水用鍍鋅鋼管件規范 | Specification for prefabricated drainage stack units in galvanized steel |
| BS 3T 53 | 鉻-鉬鋼管材規范(700MPa)(管外徑不小于12.5mm)(可焊接) | Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable) |
| BS 3T 60 | 鉻-鉬鋼管材規范(1150MPa)(最大厚度8mm） | Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm) |
| BS 4204 | 承壓鋼管的閃光焊規范 | Specification for flash welding of steel tubes for pressure applications |
| BS 4515-1 | 陸地和近海鋼管道焊接規范.碳及碳錳鋼管 | Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines |
| BS 4515-2 | 陸地和近海鋪設的鋼管焊接規范.雙聯法不銹鋼管道 | Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines |
| BS 4677 | 輸送液體用奧氏體不銹鋼管件的電弧焊規范 | Specification for arc welding of austenitic stainless steel pipework for carrying fluids |
| BS 4825-1 | 食品工業及其他衛生設施用不銹鋼管及接頭.第1部分:管規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for tubes |
| BS 4825-2 | 食品工業及其他衛生設施用不銹鋼管及接頭.第2部分:彎頭和三通規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for bends and tees |
| BS 4825-3 | 食品工業及其他衛生設施用不銹鋼管及配件.夾緊型連接件規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for clamp type couplings |
| BS 4825-4 | 食品工業及其他衛生設施用不銹鋼管及接頭.第4部分:螺紋(IDF型)管接頭規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for threaded (IDF type) coupling |
| BS 4825-5 | 食品工業及其他衛生設施用不銹鋼管及接頭.第5部分:凹環形連接管接頭規范 | Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for recessed ring joint type couplings |
| BS 4T 100 | 無縫鋼管和管材的檢驗、試驗和驗收程序 | Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock |
| BS 4T 45 | 碳-錳鋼管材規格(700 N/mm<上標2>)(管外徑大于或等于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable) |
| BS 5242-1 | 液壓動力流體氣缸筒用管材.第1部分:特別精加工表面的鋼管規范 | Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces |
| BS 5383 | 采用連續字符標記法的鋼鎳合金及鈦合金管材標志與鋼管顏色編碼規范 | Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes |
| BS 5482-1 | 家用丁烷和丙烷燃?xì)庋b置的操作規程.永久性住宅、居住區公園和商業化處所中的鋼管尺寸不超過DN25和波紋不銹 | Code of practice for domestic butane- and propane-gas-burning installations - Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper |
| BS 5S 100 | 鍛鋼制品(鋼板、薄鋼板、鋼帶和鋼管除外)檢驗、試驗和驗收程序 | Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube) |
| BS 5T 2 | 4/1鎳-鉻鋼管材規范(1300 N/mm<上標2>) | Specification for 4/1 nickel-chromium steel tube (1300 N/mm2) |
| BS 6362 | 按BS21 "帶壓密接合螺紋接頭的管及配件管螺紋" 攻絲的不銹鋼管規范 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads' |
| BS 6990 | 含有工藝流體或其殘留物的鋼管焊接實用規程 | Code of practice for welding on steel pipes containing process fluids or their residuals |
| BS 7416 | 液壓動力系統用精密無縫冷拔低碳鋼管規范 | Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems |
| BS 778 | 液壓用鋼管與接頭規范 | Specification for steel pipes and joints for hydraulic purposes |
| BS 7873 | 鐵管和鋼管熱搪瓷和/或內度層應用和試驗實用規程 | Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes |
| BS 879-1 | 水井套管.第1部分:井套管用鋼管規范 | Water well casing - Specification for steel tubes for casing |
| BS EN 10208-1 | 可燃性液體管路用鋼管.技術交貨條件.A級要求管 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class A |
| BS EN 10208-2 | 可燃流體用鋼管.技術交付條件.B級管要求 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class B |
| BS EN 10216-1 | 承壓用的無縫鋼管.交付技術狀態.規定了室溫特性的非合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions |
| BS EN 10216-2 | 承壓用的無縫鋼管.交付技術狀態.規定了高溫特性的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10216-3 | 承壓用的無縫鋼管.交付技術狀態.合金細晶粒鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes |
| BS EN 10216-4 | 承壓用的無縫鋼管.交付技術狀態.規定了低溫特性的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions |
| BS EN 10216-5 | 壓力無縫鋼管.交貨技術條件.無縫鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes |
| BS EN 10217-1 | 承壓用焊接鋼管.交付技術狀態.規定室溫特性的非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties |
| BS EN 10217-2 | 承壓用的焊接鋼管.交付技術狀態.規定了高溫特性的非合金和合金電焊鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10217-3 | 承壓用的焊接鋼管.交付技術狀態.合金細晶粒鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes |
| BS EN 10217-4 | 承壓用的焊接鋼管.交付技術狀態.規定了低溫特性的非合金和合金電焊鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties |
| BS EN 10217-5 | 承壓用的焊接鋼管.交付技術狀態.規定了高溫特性的非合金和合金埋弧焊接鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 10217-6 | 承壓用的焊接鋼管.交付技術條件.規定了低溫特性的非合金埋弧焊接鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| BS EN 10217-7 | 壓力用途焊接鋼管.交貨技術條件.不銹鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes |
| BS EN 10220 | 無縫和焊接鋼管.尺寸和每單位長度的質量 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| BS EN 10224 | 包括生活用水在內的含水液的輸送用非合金鋼管和配件.交貨技術條件 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions |
| BS EN 10240 | 鋼管內外保護覆層.用于自動化車間的熱浸鍍鋅規范 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| BS EN 10241 | 螺紋鋼管配件 | Steel threaded pipe fittings |
| BS EN 10246-1 | 鋼管的無損檢驗.證明液壓系統密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 | Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10246-10 | 鋼管無損檢驗.缺陷探測用自動熔融電弧焊鋼管焊縫的射線檢驗 | Non-destructive testing of steel tubes - Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| BS EN 10246-11 | 鋼管的無損檢驗.對無縫和焊接鋼管進行液體滲透試驗以檢測其表面缺陷 | Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
| BS EN 10246-12 | 鋼管的無損檢驗.對無縫和焊接鐵磁鋼管進行磁粉檢驗以檢測其表面缺陷 | Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| BS EN 10246-13 | 鋼管的無損檢驗.無縫和焊接鋼管(埋弧焊除外)的全外圍自動超聲波厚度檢測 | Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
| BS EN 10246-14 | 鋼管的無損檢驗.層狀缺陷探測用無縫和焊接(埋弧焊接除外)鋼管的自動超聲波檢驗 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| BS EN 10246-15 | 鋼管的無損檢驗.無縫和焊接鋼管(埋弧焊除外)的全外圍自動超聲波厚度檢測 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| BS EN 10246-16 | 鋼管的無損檢驗.對焊接鋼管焊縫臨近區域進行自動超聲波檢驗以檢測其層狀缺陷 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
| BS EN 10246-17 | 鋼管的無損檢驗.對無縫和焊接鋼管管端部進行超聲波檢驗以檢測其層狀缺陷 | Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
| BS EN 10246-18 | 鋼管的無損檢驗.對無縫和焊接鐵磁鋼管管端部進行磁粉檢驗以檢測其層狀缺陷 | Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
| BS EN 10246-2 | 鋼管的無損檢驗.驗證水密封性能用的無縫和焊接的(埋弧焊除外)奧氏體鐵素體鋼管的自動渦流試驗 | Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| BS EN 10246-3 | 鋼管的無損檢驗.缺陷探測用無縫和焊接(埋弧焊除外)鋼管的自動渦流檢驗 | Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| BS EN 10246-4 | 鋼管的無損檢驗.橫向缺陷探測用無縫鐵磁性鋼管的自動全周界磁力換能器/磁力線滲漏檢驗 | Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
| BS EN 10246-5 | 鋼管的無損檢驗.縱向缺陷探測用無縫和焊接(埋弧焊除外)的鐵磁性鋼管的自動全周界磁力換能器/磁力線滲漏檢驗 | Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| BS EN 10246-6 | 鋼管的無損檢驗.橫向缺陷探測用無縫鋼管的自動全周界超聲波檢驗 | Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
| BS EN 10246-7 | 鋼管的無損檢驗.縱向缺陷探測用無縫焊接鋼管(埋弧焊除外)的自動全周界超聲波檢驗 | Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
| BS EN 10246-8 | 鋼管的無損試驗.縱向缺陷探測用電焊鋼管焊縫的自動超聲波檢驗 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| BS EN 10246-9 | 鋼管的無損檢驗.檢測縱向或橫向缺陷用的焊接和埋弧焊鋼管的自動超聲波試驗 | Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS EN 10255 | 焊接或加螺紋的非合金鋼管.交貨技術條件 | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| BS EN 10256 | 鋼管無損檢驗.1級和2級無損檢驗師的資質及能力 | Non-destructive testing on steel tubes - Qualification and competence of level 1 and level 2 non-destructive testing personnel |
| BS EN 10266 | 鋼管、配件和結構空心型材.產品標準中術語的符號和定義 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| BS EN 10288 | 岸上和近海管道用鋼管及配件.外部的雙層擠壓聚乙烯基涂層 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| BS EN 10289 | 岸上和近海管道用鋼管和配件.外用液體涂刷的環氧涂料及環氧改性的涂料 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| BS EN 10290 | 岸上和近海輸油管用鋼管和配件.用于外部液體的聚氨酯和改性聚氨酯脂涂層 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| BS EN 10296-1 | 機械和一般工程用焊接圓鋼管.技術交貨條件.非合金和合金鋼管 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes |
| BS EN 10296-2 | 機械和一般工程用焊接圓鋼管.技術交貨條件.不銹鋼 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel |
| BS EN 10297-1 | 機械和普通工程用無縫圓形鋼管.技術交貨條件.非合金和合金鋼管 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes |
| BS EN 10297-2 | 機械和一般工程用無縫圓鋼管.技術交貨條件.不銹鋼 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel |
| BS EN 10298 | 岸上和海底管路用鋼管和管件.水泥灰漿內襯 | Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar |
| BS EN 10300 | 近岸和海上管道用鋼管和配件.外涂層用瀝青熱涂覆材料 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| BS EN 10301 | 岸上及海底管道用鋼管及配件.非腐蝕性氣體的輸送用減少摩擦的內涂層 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| BS EN 10305-1 | 精密儀器用鋼管.交貨技術條件.無縫冷拔鋼管 | Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes |
| BS EN 10305-2 | 精密儀器用鋼管.交貨技術條件.焊接冷拔鋼管 | Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes |
| BS EN 10305-3 | 精密儀器用鋼管.交貨技術條件.焊接冷精加工鋼管 | Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes |
| BS EN 10305-4 | 精密儀器用鋼管.技術交貨條件.液壓和氣動系統用無縫冷拉管 | Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10305-5 | 精密設備用鋼管.交貨技術條件.焊接和冷精加工的方形及矩形鋼管 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes |
| BS EN 10305-6 | 精密儀器用鋼管.交貨技術條件.液壓和氣動動力系統用焊接冷拉管材 | Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 10310 | 岸上和海底管路用鋼管和配件.聚酰胺粉末基內外涂層 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| BS EN 10311 | 水和其他含水液體傳送用鋼管和配件的連接用接頭 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| BS EN 10312 | 包括人生活用水在內的水成液輸送用焊接不銹鋼管.交貨技術條件 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions |
| BS EN 10329 | 海上或離岸管道用鋼管和管件.外部連接包覆層 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| BS EN 10339 | 陸上和海上輸水管道用鋼管.防腐蝕用內部液體環氧襯里 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| BS EN 1123-1 | 污水系統用插接管的縱向焊接熱浸鍍鋅鋼管及配件.要求、試驗和質量控制 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
| BS EN 1123-2 | 廢水系統用帶龍頭和插接套管的縱向焊接熱浸鍍鋅鋼管的管道和管件.第2部分:尺寸 | Pipes and fittings of longitudinally welded hot-dip galvanized steeltube with spigot and socket for waste water systems — Part 2: Dimensions |
| BS EN 1123-3 | 污水系統用帶插接套的縱向焊接熱浸鍍鋅鋼管及配件.真空排水系統以及造船用排水系統的尺寸和特殊要求 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| BS EN 1124-1 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.要求、測試和質量控制 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control |
| BS EN 1124-2 | 廢水系統用插接式縱向焊接不銹鋼管道和配件.系統5.尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S. Dimensions |
| BS EN 1124-3 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.系統X、尺寸 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions |
| BS EN 1124-4 | 污水系統用帶套管和孔座的縱向焊接不銹鋼管和配件.真空排水系統和船上排水系統用部件 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| BS EN 12068 | 陰極保護.埋于地下的或浸于水中的鋼管外部防腐有機涂層.磁帶和可縮材料 | Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials |
| BS EN 12732 | 供氣系統.焊接鋼管.功能要求 | Gas supply systems - Welding steel pipework - Functional requirements |
| BS EN 253 | 區域供暖管道.直埋式熱水供應網用預先絕熱包覆的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層的鋼管用組件 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 39 | 管及聯結腳手架用空心鋼管.交貨技術條件 | Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions |
| BS EN 448 | 區域供暖管道.直埋式熱水供應網用預先絕熱包覆的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層鋼管用成套配 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 488 | 區域供暖管道.直埋式熱水供應網用預先絕熱包覆的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層鋼管用鋼閥門 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 489 | 區域供暖管道.直埋式熱水管網用預先絕熱有包覆管層的管道系統.聚氨基甲酸乙酯熱絕緣和聚乙烯外覆層的鋼管用 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN ISO 11120 | 氣瓶.1501升-30001升水容量的可再填充的無縫鋼管.設計,結構和試驗 | Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l - Design, construction and testing |
| BS EN ISO 1127 | 不銹鋼管.尺寸、公差和單位長度的常規質量 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length |
| BS EN ISO 11960 | 石油和天然氣工業.油井套管或油管用鋼管 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells |
| BS EN ISO 11961 | 石油和天然氣工業.鉆探管用鋼管.規范 | Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification |
| BS EN ISO 13680 | 石油和天然氣工業.用作套管、油管和接箍的防腐合金無縫鋼管.交貨技術條件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
| BS EN ISO 9455-12 | 軟釬焊劑.試驗方法.鋼管耐腐蝕試驗 | Soft soldering fluxes - Test methods - Steel tube corrosion test |
| BS ISO 15741 | 油漆和清漆.岸上和近海鋪設的無腐蝕氣體鋼管道內側的減小摩擦涂層 | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 16172 | 波紋鋼管用連續熱浸金屬涂層鋼板 | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
| BS ISO 8535-1 | 柴油發動機.高壓注射燃油管道用鋼管.無縫冷拔單壁管要求 | Diesel engines - Steel tubes for high-pressure fuel injection pipes - Requirements for seamless cold-drawn single-wall tubes |
| BS ISO 8535-2 | 壓燃式發動機.高壓燃油噴管用鋼管.合成管的要求 | Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for composite tubes |
| BS T 64 | 碳-錳鋼管材規范(550 N/mm<上標2>)(管外徑小于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable) |
| BS T 67 | 18/10鉻-鎳耐腐蝕鋼管材規范(鈦穩定的:550 N/mm<上標2>)(可焊接) | Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm2) (weldable) |
| BS T 69 | 冷拉18/10鉻-鎳耐腐蝕鋼管材規范(鈦穩定的:800 N/mm<上標2>)(可焊接) | Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm2) (weldable) |
| BS T 72-T 73 | 液壓用18/10鉻-鎳耐腐蝕鋼管規范(鈮/鈦穩定;550MPa) | Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa) |
| BS T 74 | 低碳18/10鉻-鎳耐腐蝕鋼管規范(550牛頓/平方毫米) | Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel tube (500 N/mm2) |
| BS T 75 | 低碳17/12鉻-鎳-鉬耐腐蝕鋼管規范(550牛頓/平方毫米) | Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel tube (500 N/mm2) |
| BS T 76 | 鉻-鉬鋼管規范(770MPa)(可焊接) | Specification for chromium-molybdenum steel tube (770 MPa) (weldable) |
| BS T 77 | 鉻-鉬鋼管材規范(900MPa)(可焊接) | Specification for chromium-molybdenum steel tube (900 MPa) (weldable) |
| BS T 78 | 2<1/2>%鎳-鉻-鉬鋼管規范(1390Mpa) | Specification for 21/2% nickel-chromium-molybdenum steel tubes (1390 Mpa) |
| BS T 79 | 2<1/2>%鎳-鉻-鉬鋼管規范(1160Mpa) | Specification for 21/2% nickel-chromium-molybdenum steel tubes (1160 MPa) |
| BS T 80 | 12%鉻耐腐蝕鋼管規范(770Mpa) | Specification for 12% chromium corrosion-resisting steel tubes (770 MPa) |
| DD ENV 10220 | 無縫鋼管和焊接鋼管.尺寸及單位長度質量 | Seamless and welded steel tubes. Dimensions and masses per unit length |
| KIT 159 | 鋼管技術交付條件匯編 | Steel tubes technical delivery conditions kit |
| 編號 | 中文名稱 | 英文名稱 |