微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60191-6-13 | 半導體裝置的機械標準化.第6-13部分:小間距球柵陣列和小間距盤柵陣列(FBGA/FLGA)用頂部開口型插座的設計指 | Mechanical standardization of semiconductor devices - Part 6-13: Design guideline for open-top type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA) |
| IEC 60191-6-16 | 半導體器件的機械標準化.第6-16部分:半導體試驗術語表和BGA、LGA、FBGA和FLGA用老化插座 | Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA |
| IEC 60309-1 AMD 1 | 工業用插頭、插座和耦合器.第1部分:一般要求.修改件1 | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements; Amendment 1 |
| IEC 60309-1 Edition 4.1 | 工業用插頭、插座和耦合器.第1部分:一般要求 | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| IEC 60309-1 | 工業用插頭、插座和耦合器 第1部分:一般要求 | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| IEC 60309-2 AMD 1 | 工業用插頭、插座和耦合器.第2部分:插銷和插套附件的尺寸互換性要求.修改件1 | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories; Amendment 1 |
| IEC 60309-2 Edition 4.1 | 工業用插頭、插座和耦合器.第2部分:插銷和插套附件的尺寸互換性要求 | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories |
| IEC 60309-2 | 工業用插頭、插座和耦合器 第2部分:插銷和插套附件的尺寸互換性要求 | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories |
| IEC 60309-4 | 工業用插頭,插座和連接器.第4部分:有或沒有互鎖的開關插座和連接器 | Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock |
| IEC 60526 | 醫用X射線設備高壓電纜插頭插座的連接 | High-voltage cable plug and socket connections for medical X-ray equipment |
| IEC 60598-2-12 | 燈具.第2-12部分:特殊要求.安裝干線插座的通夜照明燈 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
| IEC 60603-12 | 印制板用頻率低于3MHz的連接器 第12部分:集成電路用系列插座的尺寸、一般要求和試驗的詳細規范 | Connectors for frequencies below 3 MHz for use with printed boards; part 12: detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
| IEC 60603-5 | 印制板用頻率低于3MHz的連接器 第5部分:間距為2.54 mm (0.1 in)雙面印制板用的邊緣插座連接器和兩件式連接 | Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (O.1 in) spacing |
| IEC 60603-6 | 印制板用頻率低于3MHz的連接器 第6部分:標稱厚度為1.6 mm (0.063 in)單面或雙面印制板用接觸件間距為2.54 m | Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge-socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm (0.063 in) nominal thickness. |
| IEC 60670-23 | 家用和類似用途固定電氣設施附件外殼.第23部分:地板插座與接線外殼的特殊要求 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures |
| IEC 60796-3 | 微處理機系統總線 8位和16位數據(MULTIBUS) 第3部分:采用插針和插座連接器(間接配合)作為歐洲卡配置的機械 | Microprocessor system BUS I, 8-bit and 16-bit data; part 3: mechanical and pin descriptions for the eurocard configuration with pin and socket (indirect) connectors |
| IEC 60884-1 AMD 1 | 家用和類似用途的插頭和插座引出線.第1部分:一般要求.修改件1 | Plugs and socket-outlets for household and similar purposes - Part 1: General requirements; Amendment 1 |
| IEC 60884-1 Edition 3.1 | 家用和類似用途的插頭和插座引出線.第1部分:通用要求 | Plugs and socket-outlets for household and similar purposes - Part 1: General requirements |
| IEC 60884-1 | 家用和類似用途的插頭和插座引出線.第1部分:一般要求 | Plugs and socket-outlets for household and similar purposes - Part 1: General requirements |
| IEC 60884-2-1 | 家用和類似用途的插頭插座.第2-1部分:熔斷器插頭的特殊要求 | Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs |
| IEC 60884-2-2 | 家用和類似用途的插頭插座.第2-2部分:電器插座的特殊要求 | Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances |
| IEC 60884-2-3 | 家用和類似用途的插頭插座.第2-3部分:固定設施用無聯鎖帶開關插座的特殊要求 | Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations |
| IEC 60884-2-4 | 家用和類似用途的插頭插座.第2-4部分:(SELV)安全特低電壓用插頭插座的特殊要求 | Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV |
| IEC 60884-2-5 | 家用和類似用途的插頭插座 第2-5部分:接線板的特殊要求 | Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors |
| IEC 60884-2-6 | 家用和類似用途的插頭插座 第2-6部分:固定設施用帶聯鎖帶開關插座的特殊要求 | Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed installations |
| IEC 60906-1 | 家用和類似用途插頭插座的IEC系統 第1部分:交流16A、250V插頭和插座 | IEC System of plugs and socket outlets for household and similar purposes. Part 1 : Plugs and socket-outlets 16 A 250 V a.c. |
| IEC 60906-2 | 家用和類似用途插頭插座的IEC系統 第2部分:交流15A、125V插頭和插座 | IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. |
| IEC 60906-3 | 家用和類似用途插頭插座的IEC系統 第3部分:交流和直流16A,6V、12V、24V、48V、安全特低電壓(SELV)插頭插座 | IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.c. and d.c. |
| IEC 61076-2-102 | 電氣設備連接器.第2-102部分:經質量評定的圓形連接器.外部低電壓電源用插頭和插座的分規范 | Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality; Detail specification for plugs and jacks for external low voltage power supply |
| IEC 61076-5 | 直流低頻模擬及數字高速數據應用系統用連接器 第5部分：經質量評定的成列插座 分規范 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification |
| IEC 61076-7-100 | 電子設備連接器.第7-100部分:電纜電源插座附件.由高負載矩形或圓形連接器罩和密封系統完整部件組成的米制電 | Connectors for electronic equipment - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
| IEC 62196-1 | 插頭、插座、車輛耦合器和引入線.電氣車輛傳導充電.第1部分:250A a.c 和400A d.c以下的電氣車輛的充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. |
| IEC/TR 60083 | IEC成員國中標準化的家用和類似用途的插頭和插座 | Plugs and socket-outlets for domestic and similar general use standardized in the member countries of IEC |
| ISO 3553-1 | 道路車輛 點火線圈和分電器的高壓接頭 第1部分:插座型 | Road vehicles; High-tension connections for ignition coils and distributors; Part 1 : Socket-type |
| ISO 46 | 航空器 燃油管嘴接地插頭和插座 | Aircraft; Fuel nozzle grounding plugs and sockets |
| ISO 518 | 攝影.閃光燈和電子閃光裝置的有電觸點和無電觸點的照相機附件插座.規范 | Photography - Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units - Specification |
| ISO 5866 | 航空器 有扁接頭的2型和3A型插座式的換向繼電器 間隙和固定尺寸 | Aircraft; 2 and 3A plug-in base change-over relays, Type II, with crimped connections; Clearance and fixing dimensions |
| ISO/TS 21108 | 手持式動力工具.脈沖扳手.電插座接口的尺寸和公差 | Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket |
| 編號 | 中文名稱 | 英文名稱 |