微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1363-1 | 13 A 插頭、插座和適配器.可重接和不可重接帶熔斷器底插頭規范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for rewirable and non-rewirable 13 A fused plugs |
| BS 1363-2 | 13 A 插頭、插座和適配器.13 A 有開關和無開關插座規范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for 13 A switched and unswitched socket-outlets |
| BS 1363-3 | 13 A 插頭、插座和適配器.適配器規范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for adaptors |
| BS 1363-4 | 13A 插頭、插座和適配器.第4部分:13A 熔斷連接組件開關設備規范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for 13 A fused connection units switched and unswitched |
| BS 196 | 電壓達250V單相交流電路用帶接地線的保護式不可反轉插頭、插座電纜藕合器與設備藕合器規范 | Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
| BS 3101 | 主要用于煤礦與防爆式限動插頭插座聯用的控制電路和聯鎖電路規范 | Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines |
| BS 4573 | 兩銷可換向的插頭和剃須刀輸出插座規范 | Specification for 2-pin reversible plugs and shaver socket-outlets |
| BS 5125 | 煤礦用50A 650V阻燃、保險和螺栓連接插頭和插座規范 | Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines |
| BS 546 Supplement No. 1 | 兩極和接地銷插頭、插座和插座適配器規范.補充件1:彈性材料插頭規范 | Specification for plugs made of resilient material |
| BS 546 | 規范.兩極和接地插針插頭、插座和插座底殼 | Specification - Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors |
| BS 5550-7.5.4 | 電影技術.第7部分:制片與放映.第 5節:電影和電視場地照明.第4小節:單極高電流插頭和插座連接器規范 | Cinematography - Production and presentation - Film and television location lighting - Specification for single pole high current plugs and socket connectors |
| BS 5620 | 礦山用1100V、200A安全防火與螺栓連接的插頭與插座規范 | Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines |
| BS 6312-2.1 | 模擬電信接口連接器.第2部分:符合BS 6312 Pt.1專用插頭插座.第1節:插座規范.一般要求 | Connectors for analogue telecommunication interfaces - Sockets for use with plugs specified in BS 6312:Part 1: Specification for sockets - General requirements |
| BS 6312-2.2 | 模擬電信接口用連接器.與BS 6312第1部分:永久接線設備用固定電氣插座的特殊要求中規定的插頭配套使用的插座 | Connectors for analogue telecommunication interfaces - Sockets for use with plugs specified in BS 6312-1: Particular requirements for fixed socket-outlets used in permanent wiring installations |
| BS 7288 | 插座插入剩余電流設備(S.R.C.D.S)規范 | Specification for socket outlets incorporating residual current devices (S.R.C.D.s) |
| BS 91 | 電纜焊接插座.規范 | Electric cable soldering sockets - Specification |
| BS 9526 N0001 | 多觸點邊緣插座電氣連接器詳細規范.單面或雙面、閉端、可替換觸點、穿板焊接或線繞終端.全面評估級 | Detail specification for multi-contact edge socket electrical connectors - Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level |
| BS 9526 N0002 | 多觸點邊緣插座電氣連接器詳細規范.單面或雙面、開式端、金屬固定法蘭、 導鍵定位、可替換觸點、穿板焊接或 | Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, metal fixing flanges , guide key location, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level |
| BS 9526 N0003 | 多觸點邊緣插座插接器詳細規范.單面或雙面、開式端、導鍵定位、可替換觸點、穿板焊接或線繞終端.全面評估級 | Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level |
| BS CECC 75101 | 電子元器件用質量評估協調體系.實例詳細規范/空白詳細規范.印制電路板用二件式和邊緣插座連結器 | Specification for harmonized system of quality assessment for electronic components - Example detail specification/blank detail specification - Two-part and edge socket connectors for printed board application |
| BS DD ISO/TS 21108 | 手持式動力工具.脈沖扳手.電插座接口的尺寸和公差 | Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket |
| BS EN 14638-1 | 可運輸?shù)臍馄?容量＜150升的可再充氣焊接插座.用實驗方法證明設計制成的焊接奧氏體不銹鋼氣瓶 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| BS EN 147000 | 電子元器件質量評定協調體系.通用規范.經過質量評定的繼電器插座 | Harmonized system of quality assessment for electronic components - Generic specification - Sockets for use with electrical relays of assessed quality |
| BS EN 147100 | 電子元器件質量評定協調體系.分規范:經過質量評定的繼電器插座 | Harmonized system of quality assessment for electronic components - Sectional specification: relay sockets of assessed quality |
| BS EN 147101 | 電子元器件質量評定協調體系規范.評估質量繼電器插座空白詳細規范 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: relay sockets of assessed quality |
| BS EN 15207 | 危險物品運輸罐.危險區域中用24V標稱電源電壓設備用插頭/插座連接和電源特征 | Tanks for transport of dangerous goods — Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
| BS EN 175100 | 電子元器件質量評定協調體系.部分規范.印刷電路板用雙件式印制板插座 | Harmonized system of quality assessment for electronic components - Sectional specification - Two part and edge socket connectors for printed board applications |
| BS EN 2997-003 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 003: Square flange receptacle - Product standard |
| BS EN 2997-004 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard |
| BS EN 2997-005 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 005: Hermetic square flange receptacle - Product standard |
| BS EN 2997-006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard |
| BS EN 2997-007 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard |
| BS EN 2997-011 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 011: Dummy receptacle - Product standard |
| BS EN 3155-003 | 航空航天系列.連接部件中用電連接器.第003部分: S級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-005 | 航天航天系列.連接部件中用電連接器.T級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard |
| BS EN 3155-009 | 航空航天系列.用于連接部件的電接觸器.第009部分:S級、壓褶、A型電接觸器插座的產品標準 | Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-015 | 航空航天系列.連接部件用電連結器.第015部分:A型、壓接、S級插座電連結器.產品標準 | Aerospace series — Electrical contacts used in elements of connection — Part 015: Contacts, electrical, female, type A, crimp, class S — Product standard |
| BS EN 3155-019 | 航空航天系列.連接部件中用電連接器.第019部分: S級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-023 | 航空航天系列.連接部件中用電連接器.第023部分: R級、壓緊、A型電連接器矩形插座.產品標準 | Electrical contacts used in elements of connection - Part 023: Contacts, electrical, rectangular, female, type A, crimp , class R. Product standard |
| BS EN 3155-025 | 航空航天系列.用于連接部件的電接觸器.第025部分:S級、壓褶、D型、尺寸為8、三軸電接觸器插座的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard |
| BS EN 3155-027 | 航空航天系列.連接部件中用電連接器.第027部分:R級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R. Product standard |
| BS EN 3155-031 | 航空航天系列.部件連接用電觸點.第031部分:R級、壓接、D型、插座、尺寸12的同軸屏蔽電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Product standard |
| BS EN 3155-035 | 航空航天系列.部件連接用電觸點.第035部分:R級、壓接、D型、插座、尺寸08、三軸電接點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard |
| BS EN 3155-043 | 航空航天系列.連接部件中用電連接器.第043部分:P級、焊接、D型、043插座、尺寸08mm三軸電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard |
| BS EN 3155-045 | 航空航天系列.連接部件中用電連接器.第045部分:T級、雙壓緊、A型插座電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard |
| BS EN 3155-055 | 航空航天系列.部件連接用電觸點.T級、壓接、C型、NiAl熱電偶插座電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T. Product standard |
| BS EN 3155-057 | 航空航天系列.部件連接用電觸點.T級、壓接、C型、NiCr熱電偶插座電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T. Product standard |
| BS EN 3155-059 | 航空航天系列.部件連接用電觸點.第059部分:R級、釬焊、D型、插座、尺寸16的同軸電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard |
| BS EN 3155-061 | 航空航天系列.部件連接用電觸點.R級、釬焊、D型、插座、尺寸12、屏蔽、同軸、電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, shielded, size 12, female , type D, solder, class R. Product standard |
| BS EN 3155-066 | 航空航天系列.部件連接用電觸點.尺寸8、S級、壓接、A型、插座電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S, size 8. Product standard |
| BS EN 3372-003 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Square flange receptacle - Product standard |
| BS EN 3372-005 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard |
| BS EN 3372-006 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for receptacle - Product standard |
| BS EN 3372-009 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, jam nut mounting - Product standard |
| BS EN 3372-011 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Dummy receptacle - Product standard |
| BS EN 3645-003 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第003部分:方形法蘭安裝插 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 003: Receptacle square flange mounting — Product standard |
| BS EN 3645-004 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第004部分:方形法蘭密封插 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 004: Receptacle, hermetic, square flange mounting — Product standard |
| BS EN 3645-005 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第005部分:brasage 安裝圓 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 005: Receptacle, hermetic, round flange, brasage mounting — Product standard |
| BS EN 3645-006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第006部分:插座保護蓋.產品 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 006: Protective cover for receptacle — Product standard |
| BS EN 3645-009 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第009部分:防松螺母安裝圓 | Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 009: Receptacle, round flange, jam nut mounting — Product standard |
| BS EN 3645-010 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第010部分:防松螺母安裝圓 | Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 010: Receptacle, hermetic, round flange, jam nut mounting — Product standard |
| BS EN 3645-013 | 航空航天系列.連續操作溫度175℃或200℃、3層起動螺紋聯接、防碰擦、圓形電連接器.虛擬插座.產品標準 | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Dummy receptacle - Product standard |
| BS EN 3646-003 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電器連接件.第003部分:方形法蘭安裝插座.產品標準. | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 003: Receptacle, square flange mounting - Product standard |
| BS EN 3646-005 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電連接器.第005部分:方形法蘭安裝密封插座.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard |
| BS EN 3646-006 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電器連器.第006部分:鎖緊螺母安裝密封插座.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 006: Receptacle, hermetic jam-nut mounting - Product standard |
| BS EN 3646-007 | 航空航天系列.175℃～200℃溫度工作的圓形卡口耦合電連接器.第007部分:圓形法蘭密封焊接或銅焊接的密封插座 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard |
| BS EN 3682-001 | 航空航天系列.連續工作溫度150℃、裝在板上可互換插入式矩形電插頭和插座連接器.技術規范 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Technical specification |
| BS EN 3682-002 | 航空航天系列.150℃連續工作溫度、機架到面板、可互換插入式、矩形的插頭與插座連接器.第002部分:性能和接 | Aerospace series — Connectors, plug and receptacle, electrical,rectangular, interchangeable insert type, rack to panel, operatingtemperature 150 °C continuous — Part 002: Specification of performance and contact arrangements |
| BS EN 3682-004 | 航空航天系列.150 ℃連續工作溫度、支架式到板式可互換插入式矩形插頭和插座電連接器.尺寸2插座.產品標準 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 004: Size 2 receptacle - Product standard |
| BS EN 3682-005 | 航空航天系列.150℃連續工作溫度、機架到面板、可互換插入式、矩形的插頭與插座連接器.尺寸2插頭.產品標準 | Aerospace Series - Connectors, plug and receptacle, electrical ,rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 005: Size 2 plug - Product standard |
| BS EN 3682-006 | 航空航天系列.150 ℃連續工作溫度、支架式到板式可互換插入式矩形插頭和插座電連接器.第006部分:尺寸3插座. | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 006: Size 3 receptacle - Product standard |
| BS EN 3682-008 | 航空航天系列.150 ℃連續工作溫度、支架式到板式可互換插入式矩形插頭和插座電連接器.第008部分:尺寸4插座. | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 008: Size 4 receptacle - Product standard |
| BS EN 3682-009 | 航空航天系列.連續工作溫度150 ℃支架式到板式可互換插入式矩形插頭和插座電連接器.尺寸4插頭.產品標準 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 009: Size 4 plug - Product standard |
| BS EN 3716-005 | 航空航天系列.數字傳輸用三極接口單路連接器.第005部分:壓接插座.產品標準 | Aerospace series — Connector, single-way with triaxial interface,for transmission of digital data — Part 005: Crimp receptacle — Product standard |
| BS EN 4165-012 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第012部分:系列3模塊2和4的法蘭安裝插座.產品標準 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard |
| BS EN 60169-23 | 射頻連接器.外導體內徑為3.5mm(0.1378in)3.5mm精密同軸線路用插針和插座連接器 | Radio-frequency connectors - Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) |
| BS EN 60309-1 | 工業用插頭、插座輸出口和耦合器.一般要求 | Plugs, socket-outlets and couplers for industrial purposes - General requirements |
| BS EN 60309-2 | 工業用插頭、插座輸出口和耦合器.管腳和接觸導管附件尺寸互換性要求 | Plugs, socket-outlets and couplers for industrial purposes - Dimensional interchangeability requirements for pin and contact-tube accessories |
| BS EN 60309-4 | 工業用插頭、插座端口和連接件.有或沒有互鎖的開關插座端口和連接器 | Plugs, socket-outlets and couplers for industrial purposes - Switched socket-outlets and connectors, with or without interlock |
| BS EN 60526 | 醫用X射線設備高壓電纜插頭和插座的連接 | High-voltage cable plug and socket connections for medical X-ray equipment |
| BS EN 60603-12 | 印制板用頻率低于3MHz的連接器.設計用于集成電路的插座系列尺寸、一般要求和試驗的詳細規范 | Connectors for frequencies below 3 MHz for use with printed boards - Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
| BS EN 60603-5 | 印制板用頻率低于3MHz的連接器.有2·54mm(0·10in)間距為2.54mm的雙面印制板插座和兩件連接器 | Connectors for frequencies below 3 MHz for use with printed boards - Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing |
| BS EN 60603-6 | 印制板用頻率低于3MHz的連接器.標稱厚度1.6mm(0.063in)的單面或雙面印制板用間隔距離為2·54mm(0·1in)插座 | Connectors for frequencies below 3 MHz for use with printed boards - Edge-socket connectors and printed board connectors with 2 ,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness |
| BS EN 61076-2-102 | 電子設備連接器.圓形連接器.質量評定的圓形連接器.室外低電源用插頭和插座的詳細規范 | Connectors for electronic equipment - Circular connectors - Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
| BS EN 61076-5 | 直流低頻率模擬及高速數據數字設備用連接器.經過質量評定的串聯插座.分規范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification |
| BS EN 61754-4-1 | 光纖連接器接口.SC型連接器系列.簡易SC-PC插座連接器接口 | Fibre optic connector interfaces - Type SC connector family - Simplified receptacle SC-PC connector interfaces |
| BS EN 61754-6-1 | 光纖連接器接口.MU型連接器系列.簡易MU-PC插座連接器接口 | Fibre optic connector interfaces - Type MU connector family - Simplified receptacle MU-PC connector interfaces |
| BS EN 62196-1 | 電氣機車輸入端和機車連接器用插頭和插座.電氣機車傳導沖電.250A交流和400A直流及以下的電氣機車充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c |
| BS G 175 | 航空用燃油嘴接地插頭和插座 | Aircraft fuel nozzle grounding plugs and sockets |
| BS IEC 796-3 | 微處理機系統8位和16位數據多路總線Ⅰ.具有插腳和插座連接器(間接式)的歐洲卡配置用機械和插腳描述 | Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors |
| BS PAS 003 | 有塑料插座開起桿的不可再布線的13A插頭 | Non-rewireable 13 A plugs with plastic socket shutter opening pins |
| 編號 | 中文名稱 | 英文名稱 |