微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 10765 | 咖啡和咖啡制品的分析.磨碎焙炒咖啡粒度的測定.氣流噴射篩分法 | Analysis of coffee and coffee products; determination of particle size of ground roasted coffee, air-jet sieving method |
| DIN 18123 | 建筑地基.勘探和試驗.粒度分布的測定 | Soil, investigation and testing - Determination of grain-size distribution |
| DIN 1996-14 | 瀝青的檢驗.由瀝青中回收的礦物集料粒度組成的測定 | Testing of asphalt; determination of grading of mineral aggregate recovered from asphalt |
| DIN 22018 | 硬煤采礦原材料的勘測.用浮沉分析法測定粒度分布 | Investigations of the raw material in hard-coal-mining determation of the particle-density-distribution by float-and-sink-analysis |
| DIN 22019-1 | 硬煤采礦原料的勘測.篩分法測定大于20μm的粒度分布 | Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 20 ?m by sieve-analysis |
| DIN 22019-2 | 硬煤礦原材料調查.通過超聲微粉篩分析測定<60μm粒度的分布 | Investigations of the raw material in hard-coal-mining; determination of the particle-size-distribution 60 m by ultrasonic-microsieve-analysis |
| DIN 23006-5 | 選硬煤.選煤設備和工藝的評定.第5部分:粒度減小和分離 | Preparation of hard coal - Assessment of preparation equipment and processes - Part 5: Size reduction and dissociation |
| DIN 52098 | 集料試驗方法.用濕篩法測定粒度分布 | Aggregates test methods - Determination of particle size distribution by wet sieving |
| DIN 52115-2 | 巖石粒度試驗.沖擊試驗.第2部分:碎石沖擊試驗 | Testing of aggregates - Impact test - Part 2: Impact test on ballast |
| DIN 53206-1 | 顏料的檢驗.粒度分析.基本術語 | Testing of pigments; particle size analysis, basic terms |
| DIN 53325 | 皮革檢驗.用lastometer測定粒度膨脹能力和斷裂力的球壓試驗 | Testing of leather; ball compression test for determination of grain expansion capacity and the force of fracture with the lastometer |
| DIN 54407 | 離子交換樹脂的試驗.樹脂珠粒粒度分布的測定 | Testing of ion exchange resins - Determination of bead size distribution |
| DIN 66111 Bb.1 | 顆粒度分析.沉降分析.原理.離心力場中量測定的評定公式 | Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force |
| DIN 66111 | 粒度分析.沉降分析.原理 | Particle size analysis; sedimentation analysis; principles |
| DIN 66115 | 粒度分析.在重力場中的沉降分析.吸移管法 | Particle size analysis; sedimentation analysis in the gravitational field; pipette method |
| DIN 66116-1 | 粒度分析.第1部分:重力場的沉降分析.沉積平衡 | Particle size analysis; sedimentation analysis in the gravitational field, sedimentation balance |
| DIN 66118 | 粒度分析.用空氣分級法進行粒度分析.原理 | Particle size analysis; size analysis by air classification; fundamentals |
| DIN 66119 | 粒度分析.用重力逆流篩分機的風力分級法進行粒度分析 | Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator |
| DIN 66120 | 粒度分析.用離心逆流分粒器風力分級法進行粒度分析 | Particle size analysis; size analysis by air classification with centrifugal counterflow classifier |
| DIN 66135-4 | 粒度分析.用氣體吸收法進行微孔分析.第4部分:根據Horvath-Kawazoe和Saito-Foley測定孔徑分布 | Particle size analysis - Micropore analysis by gas adsorption - Part 4: Determination of pore distribution according to Horvath-Kawazoe and Saito-Foley |
| DIN 66143 | 粒度分布圖形表示法.冪函數網格 | Graphical representation of particle size distributions; power-function grid |
| DIN 66144 | 粒度分布圖形表示法.對數正態網格 | Graphical representation of particle size distributions; log-normal grid |
| DIN 66145 | 粒度分布圖形表示法.RRSB網格 | Graphical representation of particle size distributions; RRSB-grid |
| DIN 66161 | 粒度分析.公式符號、單位 | Particle size analysis; formula symbols, units |
| DIN 66165-1 | 粒度分析.篩析.基本原理 | Particle size analysis; sieve analysis; general principles |
| DIN 66165-2 | 粒度分析.篩析.程序 | Particle size analysis; sieve analysis; procedure |
| DIN CEN/TS 15149-1 | 固體生物燃料.粒度分布的測定方法.第1部分:篩孔為3.15 mm及以上的振動篩選法 | Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above; German version CEN/TS 15149-1:2006 |
| DIN CEN/TS 15149-2 | 固體生物燃料.粒度分布的測定方法.第2部分:篩孔為3.15 mm及以下的振動篩選法 | Solid biofuels - Methods for the determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below; German version CEN/TS 15149-2:2006 |
| DIN CEN/TS 15149-3 | 固體生物燃料.粒度分布的測定方法.第3部分:回轉篩選法 | Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method; German version CEN/TS 15149-3:2006 |
| DIN CEN/TS 15415 | 固體回收燃料.用篩分法測定粒度分布 | Solid recovered fuels - Determination of particle size distribution by screen method; German version CEN/TS 15415:2006 |
| DIN EN 1015-1 | 圬工用灰漿的試驗方法.第1部分:測定粒度分布(篩析法) | Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis); German version EN 1015-1:1998+A1:2006 |
| DIN EN 12192-1 | 混凝土構件的保護和檢修用產品和系統.粒度分析.第1部分:預混合灰漿干成份的檢驗方法; 德文版本 EN 12192-1: | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar; German version EN 12192-1:2002 |
| DIN EN 12192-2 | 混凝土支承結構防護和維修用產品和系統.粒度分析.第2部分;聚合物粘合劑填料檢驗方法 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents; German version EN 12192-2:1999 |
| DIN EN 12697-2 | 瀝青混合料.熱混瀝青的試驗方法.第2部分:粒度分布的測定 | Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution; German version EN 12697-2:2002+A1:2007 |
| DIN EN 12948 | 石灰材料.用干濕篩選法測定粒度分布 | Liming materials - Determination of size distribution by dry and wet sieving; German version EN 12948:2002 |
| DIN EN 15428 | 土壤改良劑和生長劑.粒度分布的測定 | Soil improvers and growing media - Determination of particle size distribution; German version EN 15428:2007 |
| DIN EN 451-2 | 飛灰檢驗方法.第2部分:通過濕法篩選測定粒度 | Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994 |
| DIN EN 481 | 工作場所環境.測量空氣中微粒粒度的定義 | Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993 |
| DIN EN 623-3 | 高級工業陶瓷.單片陶瓷.總則和結構特性.第3部分:粒度和粒度分布測定(用線性截斷法表征) | Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method); German version EN 623-3:2001 |
| DIN EN 725-5 | 高級技術陶瓷.陶瓷粉末試驗方法.第5部分:粒度分布測定 | Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution; German version EN 725-5:2007 |
| DIN EN 932-2 | 巖石粒度一般性能試驗方法.第2部分:實驗室試樣擠壓方法 | Test for general properties of aggregates - Part 2: Methods for reducing laboratory samples; German version EN 932-2:1999 |
| DIN EN 933-1 | 集料的幾何性能的試驗.第1部分:粒度分布的測定.篩分法 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:1997 + A1:2005 |
| DIN EN 933-2 | 集料幾何特性試驗.第2部分:粒度分布測定.篩孔公稱尺寸 | Test for geometrical properties of aggregates - Part 2: Determination of particle size distribution; test sieves, nominal size of apertures; German version EN 933-2:1995 |
| DIN EN 933-7 | 巖石粒度幾何特性試驗.第7部分:貝殼含量測定.粗巖顆粒中貝殼含量百分比 | Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998 |
| DIN EN 933-9 | 巖石粒度幾何特性試驗.第9部分:細粒評估.壓甲藍試驗 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines; methylene blue test; German version EN 933-9:1998 |
| DIN EN ISO 11125-2 | 使用涂料及相關產品前鋼材的預處理.噴丸處理金屬磨料試驗方法.第2部分:粒度分布測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997 |
| DIN EN ISO 11127-2 | 使用涂料及相關產品前鋼材的預處理.噴丸處理非金屬磨料試驗方法.第2部分:粒度分布測定 | Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997 |
| DIN EN ISO 643 | 鋼.表觀粒度的顯微照相測定法 | Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003 |
| DIN ISO 10076 | 金屬粉末.用液體中重力沉淀和衰減測量測定粒度分布(ISO 10076:1991) | Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement (ISO 10076:1991) |
| DIN ISO 13321 | 粒度分析.相關光子光譜學 | Particle size analysis - Photon correlation spectroscopy (ISO 13321:1996) |
| DIN ISO 4497 | 金屬粉末.用干篩法測定粒度 | Metallic powders; determination of particle size by dry sieving; identical with ISO 4497:1983 |
| DIN ISO 6106 | 磨料制品.超級磨料的磨料粒度的檢驗(ISO 6106-2005) | Abrasive products - Checking the grit size of superabrasives (ISO 6106:2005) |
| DIN ISO 6344-1 | 砂布.粒度分析.第1部分:粒度分布試驗 | Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998) |
| DIN ISO 6344-2 | 涂層磨料.粒度分析.第2部分:肉眼可見磨料為P12至P220的粒度分布測定 | Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P 12 to P 220 (ISO 6344-2:1998) |
| DIN ISO 6344-3 | 砂布.粒度分析.第3部分:P240至P2500粗磨粒的粒度分布測定 | Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P 240 to P 2500 (ISO 6344-3:1998) |
| DIN ISO 7708 | 空氣質量.衛生抽樣用懸浮灰塵粒度分布定義 | Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995) |
| DIN ISO 8130-1 | 粉末涂料.第1部分:用篩分法測定粒度分布 | Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992) |
| DIN ISO 8130-13 | 粉末涂料.第13部分:采用激光衍射的粒度分析 | Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001) |
| DIN ISO 8486-1 | 粘合磨料.粒度分布測定和標識.第1部分:F4至F220磨粒 | Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 (ISO 8486-1:1996) |
| DIN ISO 8486-2 | 粘合磨料.粒度分布測定和標識.第2部分:F230至F1200磨粒 | Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F1200 (ISO 8486-2:1996) |
| DIN ISO 9136-1 | 磨料粒度.堆積密度的測定.粗磨粒(ISO 9136-1-2004) | Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004) |
| DIN ISO 9136-2 | 磨料粒度.堆積密度的測定.粗磨粒 | Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999) |
| DIN ISO 9137 | 磨料粒度.毛細作用測定 | Abrasive macrograins - Determination of capillarity (ISO 9137:1990) |
| DIN ISO 9138 | 磨料粒度.取樣和分割 | Abrasive grains - Sampling and splitting (ISO 9138:1993) |
| DIN ISO 9276-1 | 粒度分析結果的表示.第1部分:圖形表示 | Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998) |
| DIN ISO 9276-2 | 粒度分析結果的表示.第2部分:平均粒度/直徑和粒度分布的力矩的計算(ISO 9276-2-2001) | Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001) |
| DIN ISO 9276-4 | 粒度分析結果的表示.第4部分:分類過程的特性(ISO 9276-4-2001) | Representation of results of particle size analysis - Part 4: Characterization of a classification process (ISO 9276-4:2001) |
| DIN ISO 9284 | 磨料粒度.篩分試驗機 | Abrasive grains - Test-sieving machines (ISO 9284:1992) |
| DIN ISO 9285 | 磨料粒度.電熔氧化鋁的化學分析 | Abrasive grains and crude - Chemical analysis of fused aluminium oxide (ISO 9285:1997) |
| DIN ISO 9286 | 磨料粒度.碳化硅的化學分析 | Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:1997) |
| DIN ISO/TS 17892-4 | 土工調查和試驗.土壤的實驗室試驗.第4部分:粒度大小分布的測定 | Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004); German version CEN ISO/TS 17892-4:2004 |
| 編號 | 中文名稱 | 英文名稱 |