微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1438 | 集料.生物滲透濾器介質用單一粒度集料 | Aggregates - Single-sized aggregates for use as a medium in biological percolating filters |
| BS 3406-1 | 粒度分布測定方法.第1部分:粉末取樣指南 | Methods for determination of particle size distribution - Guide to powder sampling |
| BS 3406-8 | 粒度分布測定方法.第8部分:光子相干譜 | Methods for determination of particle size distribution - Photon correlation spectroscopy |
| BS 3406-9 | 粒度分布測定法.第9部分:過濾器阻塞(死網眼)法推薦標準 | Methods for determination of particle size distribution - Recommendations for the filter blockage method (mesh obscuration) |
| BS 3482-7 | 干燥劑試驗方法.第7部分:粒度測定 | Methods of test for desiccants - Determination of particle size |
| BS 3625 | 粉末粒度測定用目鏡和網格分度鏡規范 | Specification for eyepiece and screen graticules for the determination of the particle size of powders |
| BS 4140-24 | 氧化鋁試驗方法.第24部分:粒度分布測定(電鑄篩分法) | Methods of test for aluminium oxide - Determination of fine particle size distribution (method using electroformed sieves) |
| BS 4427-5 | 工業用三磷酸鈉(三磷酸五鈉)和焦磷酸鈉(焦磷酸四鈉)的試驗方法.粒度分布的測定 | Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use - Determination of particle size distribution |
| BS 5663-2 | 鐵礦石試驗方法.第2部分:用篩分法測定粒度分布 | Methods of testing iron ores - Determination of size distribution by sieving |
| BS 5688-13 | 工業用硼酸、氧化硼、四硼酸二鈉、高硼酸鈉與粗硼酸鈉的試驗方法.用機械篩分法測定過硼酸鈉粒度分布 | Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of particle size distribution of sodium perborates by mechanical sieving |
| BS 5752-10 | 咖啡與咖啡制品試驗方法.第10部分:速溶咖啡.粒度分析 | Methods of test for coffee and coffee products - Instant coffee: size analysis |
| BS 5752-5 | 咖啡與咖啡制品試驗方法.第5部分:生咖啡手工篩分粒度分析 | Methods of test for coffee and coffee products - Green coffee: size analysis by manual sieving |
| BS 6043-2.12 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第12節:碎焦粒度分布測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution of fine coke |
| BS 6043-2.9 | 制鋁工業用含碳材料的取樣和試驗方法.電極焦炭.粒度分布的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution |
| BS EN 12012-2 | 橡膠和塑料機.粒度減小機.多芯鉸線的安全要求 | Rubber and plastics machines - Size reduction machines - Safety requirements for strand pelletisers |
| BS EN 12192-1 | 混凝土結構的防護和修整用產品和系統.粒度分析.預混合泥漿干組分的試驗方法 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Test method for dry components of premixed mortar |
| BS EN 12192-2 | 混凝土結構的防護和修整用產品和系統.粒度分析.聚合物粘合劑用填料的試驗方法 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Test method for fillers for polymer bonding agents |
| BS EN 12948 | 石灰材料.用干濕篩選法對粒度分布進行的測定 | Liming materials - Determination of size distribution by dry and wet sieving |
| BS EN 24497 | 金屬粉末.用干篩法測定粒度 | Metallic powders - Determination of particle size by dry sieving |
| BS EN 481 | 工作場所氣氛.空氣中微粒測量的粒度級定義 | Workplace atmospheres - Size fraction definitions for measurement of airborne particles |
| BS EN 623-3 | 高級工程陶瓷.單片陶瓷.一般和紋理特性.粒度和粒度分布的測定(線性截取法表征) | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of grain size and size distribution (characterized by the linear intercept method) |
| BS EN 933-1 | 集料的幾何特性試驗.粒度分布測定.篩法 | Tests for geometrical properties of aggregates - Determination of particle size distribution - Sieving method |
| BS EN ISO 11125-2 | 涂料和相關產品使用前鋼基體的預處理.噴射金屬清理磨料的試驗方法.粒度分布測定 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Determination of particle size distribution |
| BS EN ISO 18395 | 動植物脂肪和油.用高效粒度排除色譜法(HPSEC)測定單酰甘油、二酰甘油、三酰甘油和丙三醇 | Animal and vegetable fats and oils - Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) |
| BS EN ISO 2624 | 銅及銅合金.平均粒度估計 | Copper and copper alloys - Estimation of average grain size |
| BS EN ISO 643 | 鋼.表面粒度的縮微照相測定 | Steels - Micrographic determination of the apparent grain size |
| BS ISO 11286 | 茶.用粒度分析法進行等級分類 | Tea - Classification of grades by particle size analysis |
| BS ISO 13317-1 | 用重力液體沉淀法測定粒度分布.通用原則和指南 | Determination of particle size distribution by gravitational liquid sedimentation methods - General principles and guidelines |
| BS ISO 13317-2 | 用重力液體沉淀法測定粒度分布.固定移液管法 | Determination of particle size distribution by gravitational liquid sedimentation methods - Fixed pipette method |
| BS ISO 13317-3 | 用重力液體沉淀法測定粒度分布.X射線重力技術 | Determination of particle size distribution by gravitational liquid sedimentation methods - X-ray gravitational technique |
| BS ISO 13318-2 | 離心液體沉淀法測定粒度分布.光致離心法 | Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method |
| BS ISO 13318-3 | 用離心液體沉淀法測定粒度分布.離心X射線法 | Determination of particle size distribution by centrifugal liquid sedimentation methods - Centrifugal X-ray method |
| BS ISO 13319 | 粒度分布的測定.電感線圈法 | Determination of particle size distributions - Electrical sensing zone method |
| BS ISO 13320-1 | 粒度分析.激光衍射方法.一般規則 | Particle size analysis - Laser diffraction methods - General principles |
| BS ISO 13322-1 | 粒度分析.圖象分析方法.靜態圖象分析方法 | Particle size analysis - Image analysis methods - Static image analysis methods |
| BS ISO 13322-2 | 粒度分析.圖像分析法.靜態圖像分析法 | Particle size analysis - Image analysis methods - Dynamic image analysis methods |
| BS ISO 15825 | 橡膠配合材料.炭黑.用盤式離心沉淀攝影法測定集料粒度分布 | Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentory |
| BS ISO 16014-1 | 塑料.用粒度排除色譜法測定聚合物中平均分子量和分子量的分布.一般原則 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - General principles |
| BS ISO 16014-2 | 塑料.用粒度排除色譜法測定聚合物的平均分子量和分子量的分布.通用校準法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Universal calibration method |
| BS ISO 16014-3 | 塑料.用粒度排除色譜法測定聚合物中平均分子量和分子量的分布.低溫法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Low-temperature method |
| BS ISO 16014-4 | 塑料.用粒度排除色譜法測定平均分子量和分子量分布.高溫法 | Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - High-temperature method |
| BS ISO 16564 | 天然橡膠.用粒度分離色譜法測定平均分子質量和分子質量分布 | Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) |
| BS ISO 18395 | 動植物脂肪和油.用高效粒度排除色譜法(HPSEC)測定單酰甘油、二酰甘油、三酰甘油和丙三醇 | Animal and vegetable fats and oils - Determination of monoacylglycerols, diacylglycerols, triacylglycerols and glycerol by high-performance size-exclusion chromatography (HPSEC) |
| BS ISO 20203 | 鋁生產用碳素材料.煅燒焦炭.用X射線衍射法測定煅燒石油焦炭的晶體粒度 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
| BS ISO 22498 | 塑料.氯乙烯均聚物和共聚物樹脂.采用機械篩分法進行的粒度測定 | Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving |
| BS ISO 2926 | 主要用于鋁生產的氧化鋁.45 μm至150 μm范圍內的粒度分析.電刻篩分法 | Aluminium oxide used for the production of primary aluminium - Particle size analysis for the range 45 ?m to 150 ?m - Method using electroformed sieves |
| BS ISO 4365 | 明渠水流.河、河渠泥沙.含沙量、粒度分布和相對密度的測定 | Liquid flow in open channels - Sediment in streams and canals - Determination of concentration, particle size distribution and relative density |
| BS ISO 6106 | 磨料制品.超級磨料的磨料粒度的檢驗 | Abrasive products - Checking the grit size of superabrasives |
| BS ISO 6344-1 | 砂布.粒度分析.粒度分布試驗 | Coated abrasives - Grain size analysis - Grain size distribution test |
| BS ISO 6344-2 | 砂布.粒度分析.第2部分:P12-P220粗磨料粒度分布測定 | Coated abrasives - Grain size analysis - Determination of grain size distribution of macrogrits P12 to P220 |
| BS ISO 6344-3 | 砂紙.粒度分析.P240-P2500粗磨料粒度分布測定 | Coated abrasives - Grain size analysis - Determination of grain size distribution of microgrits P240 to P2500 |
| BS ISO 8486-1 | 粘合磨料.粒徑分布的測定和標記.第1部分:粒度范圍為F4-F220 | Bond abrasives - Determination and designation of grain size distribution - Macrogrits F4 to F220 |
| BS ISO 8486-2 | 粘合磨料.粒度分布的測定和標記.F230到F2000微磨粉 | Bonded abrasives - Determination and designation of grain size distribution - Microgrits F230 to F2000 |
| BS ISO 9136-2 | 磨料粒度.堆積密度的測定.細磨粒 | Abrasive grains - Determination of bulk density - Microgrits - Part 2 : Microgrits |
| BS ISO 9276-1 | 粒度分析結果表述.圖形表述 | Representation of results of particle size analysis - Graphical representation |
| BS ISO 9276-2 | 粒度分析結果的表示.從粒度分布計算平均粒度/直徑和力矩 | Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions |
| BS ISO 9276-4 | 粒度分析結果的表示.分類過程的特征說明 | Representation of results of particle size analysis - Characterization of a classification process |
| BS ISO 9276-5 | 粒度分析結果的表示.使用對數正態概率分布的粒度分析相關計算方法 | Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution |
| 編號 | 中文名稱 | 英文名稱 |