微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 12330 | 熔融石英和熔融氧化硅材料制實驗室器具.熔融石英玻璃燒杯 | Laboratory ware made from fused quartz and fused silica; beakers made from fused quartz |
| DIN 12353 | 熔融石英和熔融硅石制實驗室儀器.熔融石英燒瓶、圓底燒瓶、平底燒瓶和錐形燒瓶 | Laboratory ware made from fused quartz and fused silica; boiling flasks made from fused quartz; round bottom flasks, flat bottom flasks and conical flasks |
| DIN 12542 | 熔融石英和硅石制的實驗室儀器.熔融石英制成的直孔旋塞. | Laboratory ware made from fused quartz and fused silica; straight bore stopcocks made from fused quartz |
| DIN 12543 | 熔融石英和硅石制實驗儀器.熔融石英制三通旋塞. | Laboratory ware made from fused quartz and fused silica; T-bore stopcocks made from fused quartz |
| DIN 52342-1 | 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第1部分:一般報告和指南 | Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, general statements and guidelines |
| DIN 52342-2 | 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第2部分:測定 Al<下標2>O<下標3>、 Fe< | Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, fusion process for the determination of Al<(Index)2>O<(Index)3>, Fe<(Index)2>O<(Index)3> and TiO<(Index)2> as we-ll as CaO, MgO, Na<(Index)2>O and K<(Index)2>O |
| DIN 52342-3 | 玻璃生產原料的檢驗.二氧化硅含量最低為 98% 石英砂的化學分析.第3部分:Al<下標2>O<下標3> 測定 | Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica; determination of Al<(Index)2>O<(Index)3> |
| DIN 52342-4 | 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第4部分:以氧化鐵(III) Fe<下標2>O<下標 | Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of the total content calculated as iron(III)-oxide Fe<(Index)2>O<(Index)3> |
| DIN 52342-5 | 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第5部分:氧化鈦(IV) TiO<下標2> 的測定 | Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of titanium(IV)-oxide TiO<(Index)2> |
| DIN 52342-6 | 玻璃生產用原料的檢驗.第6部分:二氧化硅最低含量為98%的石英砂的化學分析、測定 CaO 和 MgO | Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of CaO and MgO |
| DIN 52342-7 | 玻璃生產用原料的檢驗.二氧化硅最低含量為 98% 的石英砂的化學分析.第7部分: NA<下標2>O and K<下標2>O 的 | Testing of raw materials for the production of glass; chemical analysis of arenaceous quartz with at least 98 % silica, determination of NA<(Index)2>O and K<(Index)2>O |
| DIN 55626-19 | 紙和紙板用填充劑和顏料.規范和試驗方法.第19部分:沉淀二氧化硅(石英) | Extenders and pigments for paper and board - Specifications and methods of test - Part 19: Precipitated silica |
| DIN 55626-20 | 紙和紙板用填充劑和顏料.規范和試驗方法.第20部分:氣相二氧化硅(石英) | Extenders and pigments for paper and board - Specifications and methods of test - Part 20: Fumed silica |
| DIN 8325-1 | 大型石英鐘.要求、檢驗、標志 | Quartz-clocks; requirements, testing, marking |
| DIN 8325-2 | 石英鐘.鬧鐘.要求、檢驗 | Quartz clocks; alarm clocks; requirements, testing |
| DIN 8326-1 | 石英手表.第1部分:要求、檢驗、標記 | Quartz wrist watches; requirements, testing, marking |
| DIN EN 12904 | 人類生活用水處理用制品.石英砂和石英礫石 | Products used for treatment of water intended for human consumption - Silica sand and silica gravel; German version EN 12904:2005 |
| DIN EN 168100 | 分規范:石英晶體裝置(性能批準) | Sectional specification: quartz crystal units (capability approval) (includes amendments A1 and A2:1993); German version EN 168100:1993 |
| DIN EN 168101 | 空白詳細規范.石英振蕩器(性能批準) | Blank detail specification; quartz crystal units (capability approval); german version EN 168101:1992 |
| DIN EN 168200 | 分規范.石英晶體裝置(合格認定) | Sectional specification; quartz crystal units (qualification approval); German version EN 168200:1993 |
| DIN EN 168201 | 空白詳細規范.石英振蕩器(合格批準) | Blank detail specification; quartz crystal units (qualification approval); german version EN 168201:1992 |
| DIN EN 169200 | 分規范:石英受控振蕩器(合格鑒定) | Sectional specification: Quartz crystal controlled oscillators (Qualification approval); German version EN 169200:1995 |
| DIN EN 169201 | 空白詳細規范:石英受控振蕩器(合格鑒定) | Blank detail specification: Quartz crystal controlled oscillators (Qualification approval); German version EN 169201:1995 |
| DIN EN 60122-1 | 經質量評定的石英晶體元件.第1部分:總規范 | Quartz crystal units of assessed quality - Part 1: Generic specification (IEC 60122-1:2002); German version EN 60122-1:2002 |
| DIN EN 60122-3 | 經質量評估的石英晶體元件.第3部分:標準外形和引線連結件 (IEC 60122-3:2001); 德文版本 EN 60122-3:2001 | Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections (IEC 60122-3:2001); German version EN 60122-3:2001 |
| DIN EN 60444-1 | 用π型網絡的零相位技術測量石英晶體單元的參數.第1部分:用π型網絡的零相位技術測量石英晶體單元的諧振頻 | Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network (IEC 60444-1:1986 + A1:1999); German version EN 60444-1:1997 + A1:1999 |
| DIN EN 60444-2 | 用π型網絡的零相位技術測量石英晶體元件參數.第2部分:相位偏離法測量石英晶體元件動態電容 | Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units (IEC 60444-2:1980); German version EN 60444-2:1997 |
| DIN EN 60444-3 | 用π型網絡零相位技術測量石英諧振器參數.第3部分:用與并聯電容量Co補償相連的π網絡相位技術測量不超過200 | Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the parallel capacitance C<(Index)o> (IEC 60444-3:1986); German version EN 60444-3:1997 |
| DIN EN 60444-4 | 用π型網絡的零相位技術測量石英晶體元件參數.第4部分:頻率達30MHz石英晶體元件負載諧振頻率fL和負載諧振電 | Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency f<(Index)L>, load resonance resistance R<(Index)L> and the calculation of other derived values of quartz crystal units, up to 30 MHz (IEC 60444-4:1988); German version EN 60444-4:1997 |
| DIN EN 60444-5 | 石英晶體元件參數測量.第5部分:自動網絡分析儀和誤差修正技術評定電氣參數的測量方法 | Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German version EN 60444-5:1997 |
| DIN EN 60444-6 | 石英晶體元件參數測量.第6部分:激勵電平相關性測量 | Measurement of quartz crystal unit parameters - Part 6: Measurement of drive level dependence (DLD) (IEC 60444-6:1995); German version EN 60444-6:1997 |
| DIN EN 60444-7 | 石英晶體元件參數的測量.第7部分:石英晶體元件的活性和頻率下降的測量 | Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units (IEC 60444-7:2004); German version EN 60444-7:2004 |
| DIN EN 60444-8 | 石英晶體元件參數的測量.第8部分:表面安裝的石英晶體元件用測試工具 | Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2003); German version EN 60444-8:2003 |
| DIN EN 60444-9 | 石英晶體元件參數的測量.第9部分:壓電晶體元件諧振的測量 | Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units (IEC 60444-9:2007); German version EN 60444-9:2007 |
| DIN EN 60455-3-2 | 電氣絕緣用樹脂基反應性復合物.第3部分:單項材料規范.活頁2:填石英的環氧樹脂復合物 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds (IEC 60455-3-2:2003); German version EN 60455-3-2:2003 |
| DIN EN 60679-1 | 經質量評定的石英晶體振蕩器.第1部分:總規范 | Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification (IEC 60679-1:1997 + A1:2002 + A2:2003); German version EN 60679-1:1998 + A1:2002 + A2:2003 |
| DIN EN 60679-3 | 經質量評估的石英晶體受控振蕩器.第3部分:標準外形和引線連接件 (IEC 60679-3:2001); 德文版本 EN 60679-3: | Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections (IEC 60679-3:2001); German version EN 60679-3:2001 |
| DIN EN 60679-4-1 | 經質量評定的石英晶體控制振蕩器.第4-1部分:空白詳細規范.能力認可 | Quartz crystal controlled oscillators of assessed quality - Part 4-1: Blank detail specification; capability approval (IEC 60679-4-1:1998); German version EN 60679-4-1:1998 |
| DIN EN 60679-4 | 經質量評定的石英晶體控制振蕩器.第4部分:分規范.能力認可 | Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional specification - Capability approval (IEC 60679-4:1997); German version EN 60679-4:1998 |
| DIN EN 60679-5-1 | 經過質量評定的石英晶體控振蕩器.第5-1部分:空白詳細規范.合格鑒定 | Quartz crystal controlled oscillators of assessed quality - Part 5-1: Blank detail specification; qualification approval (IEC 60679-5-1:1998); German version EN 60679-5-1:1998 |
| DIN EN 60679-5 | 經過質量評定的石英晶體控制振蕩器.第5部分:分規范.合格鑒定 | Quartz crystal controlled oscillators of assessed quality - Part 5: Sectional specification; qualification approval (IEC 60679-5:1998); German version EN 60679-5:1998 |
| DIN EN 60682 | 測量石英鹵鎢燈夾封部溫度的標準方法 | Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps (IEC 60682:1980 + A1:1987); German version EN 60682:1993 |
| DIN EN 60682/A2 | 石英玻璃燈具擠壓溫度的測量方法.修改件2 (IEC 60682:1980/A2:1997); 德文版本 EN 60682:1993/A2:1997 | Method of measuring the pinch temperature of quartz glass lamps; Amendment A2 (IEC 60682:1980/A2:1997); German version EN 60682:1993/A2:1997 |
| DIN EN 60758 | 人造石英晶體.規范和使用指南 | Synthetic quartz crystal - Specifications and guide to the use (IEC 60758:2004); German version EN 60758:2005 |
| DIN EN ISO 10650-1 | 牙科學.動力聚合活化劑.第1部分:石英鎢鹵素?zé)? | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004); German version EN ISO 10650-1:2005 |
| DIN EN ISO 3262-13 | 涂料的填充料.規范和試驗方法.第13部分:天然石英(已磨碎) | Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997); German version EN ISO 3262-13:1998 |
| DIN EN ISO 3262-15 | 涂料用填充劑.規范和試驗方法.第15部分:透明石英 | Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000); German version EN ISO 3262-15:2000 |
| DIN EN ISO 3262-19 | 涂料用填充劑.規范和試驗方法.第19部分:沉淀石英 | Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000); German version EN ISO 3262-19:2000 |
| DIN EN ISO 3262-20 | 涂料用填充劑.規范和試驗方法.第20部分:煙化石英 | Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000); German version EN ISO 3262-20:2000 |
| DIN EN ISO 3262-21 | 涂料用填充劑.規范和試驗方法.第21部分:石英砂(地下天然石英) | Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); German version EN ISO 3262-21:2000 |
| DIN IEC 60122-2-1 | 頻率控制和選擇用石英晶體元件.第2部分:頻率控制和選擇用石英晶體元件使用導則.第1節:微處理機脈沖源用石英 | Quartz crystal units for frequency control and selection; part 2: guide to use of quartz crystal units for frequency control and selection; Section one: quartz crystal units for microprocessor clock supply; identical with IEC 60122-2-1:1991 |
| DIN IEC 60122-2 | 穩率控制和選擇用石英晶體元件.第2部分:頻率控制和選擇用石英晶體元件使用導則 | Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; identical with IEC 60122-2:1983 |
| DIN IEC 60122-3 | 頻率控制和選擇用石英晶體元件.第3部分:標準外形和引線連接 | Quartz crystal units for frequency control and selection; part 3: standard outlines and lead connections; identical with IEC 60122-3:1977 (status as of 1991) |
| DIN IEC 60368-2-1 | 壓電濾波器.第2部分:壓電濾波器使用指南.第1節:石英晶體濾波器 | Piezoelectric filters; part 2: guide to the use of piezoelectric filters; section 1: quartz crystal filters; identical with IEC 60368-2-1:1988 |
| DIN IEC 60679-2 | 石英晶體受控振蕩器.第2部分:石英晶體受控振蕩器使用導則 | Quartz crystal controlled oscillators - Part 2: Guide to the use of quartz crystal controlled oscillators (IEC 60679-2:1981) |
| DIN IEC 61080 | 石英振蕩器等效電參數測量指南 | Guide to the measurement of equivalent electrical parameters of quartz crystal units; identical with IEC 61080:1991 |
| DIN IEC 61178-2-1 | IEC電子元器件質量評定體系規范(IECQ).石英晶體組件.第2部分:分規范:能力認可.第1節:空白詳細規范 | A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 2: Sectional specification, capability approval; section 1: Blank detail specification; identical with IEC 61178-2-1:1993 |
| DIN IEC 61178-2 | IEC電子元器件質量評定體系規范(IECQ).石英晶體組件.第2部分:分規范:能力批準 | A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 2: Sectional specification, capability approval; identical with IEC 61178-2:1993 |
| DIN IEC 61178-3-1 | 石英晶體單元.IEC電子元器件質量評定體系規范(IECQ).第3部分:分規范:合格驗收.第1節:空白詳細規范 | A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 3: Sectional specification, qualification approval; section 1: Blank detail specification; identical with IEC 61178-3-1:1993 |
| DIN IEC 61178-3 | IEC電子元器件質量評定體系規范(IECQ).石英晶體組件.第3部分:分規范:合格鑒定批準 | A specification in the IEC quality assessment system for electronic components (IECQ) - Quartz crystal units - Part 3: Sectional specification, qualification approval; identical with IEC 61178-3:1993 |
| 編號 | 中文名稱 | 英文名稱 |