微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2067 | 絕緣材料的功率因子與電容率的測定(哈特遜和瓦德法) | Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method) |
| BS 2692-3 | 1000V以上交流電熔斷器.第3部分:短路功率因數測定指南 | Fuses for voltages exceeding 1000 V a.c. Guide to the determination of short circuit power factor |
| BS 4409-3 | 螺旋輸送機.第3部分:傳動功率計算方法 | Screw conveyors - Method for calculating drive power |
| BS 5000-11 | 特種或?qū)Ｓ眯D(zhuǎn)電機.第11部分:小功率電動機和發電機 | Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators |
| BS 5410-1 | 燃油規范.第1部分:輸出功率小于等于45KW的環流供暖及熱水供應鍋爐裝置 | Code of practice for oil firing - Installations up to 45 kW output capacity for space heating and hot water supply purposes |
| BS 5410-2 | 燒油慣例.第2部分:輸出功率大于等于45kW的空間加熱、熱水和蒸汽供應設備 | Code of practice for oil firing - Installations of 45 kW and above output capacity for space heating, hot water and steam supply services |
| BS 5514-7 | 往復式內燃機性能.第7部分:發動機功率規程 | Reciprocating internal combustion engines: performance - Codes for engine power |
| BS 5654-2 | 直流輸出穩壓電源.第2部分:額定功率與性能規定方法 | Stabilized power supplies, d.c. output - Method of specifying rating and performance |
| BS 5760-10.5 | 系統、設備和部件可靠性.第10部分:可靠性試驗指南.第5節:成功率合格試驗方案 | Reliability of systems, equipment and components - Guide to reliability testing - Compliance test plans for success ratio |
| BS 5944-4 | 液壓動力系統和部件空氣噪音測量.第4部分:流量和壓力控制閥聲功率級測定方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure |
| BS 5944-5 | 液壓系統和部件氣動噪音測量.第5部分:使消聲室測定液壓泵聲功率等級的簡易方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber |
| BS 5986 | 熱輸入功率為60kW到2MW的燃氣對流式加熱器的電安全性和性能規范 | Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW |
| BS 6347-2 | 農用拖拉機性能評定.第2部分:液壓功率和提升能力測定方法 | Performance assessment of agricultural tractors - Methods for determination of hydraulic power and lifting capacity |
| BS 6347-7 | 農用拖拉機性能評定.第7部分:軸功率測定方法 | Performance assessment of agricultural tractors - Method for determination of axle power |
| BS 6583 | 中央通風裝置風機區額定功率的體積測定試驗方法(包括功率分級指南) | Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating) |
| BS 6590 | 機械的開式壓力機的額定功率和尺寸規范 | Specification for capacity ratings and dimensions of power presses, mechanical open front type |
| BS 6644 | 額定輸入功率在70 kW(凈功率)和1.8 MW(凈功率)之間(2類和3類家用煤氣)的燃氣熱水鍋爐的安裝規范 | Specification for Installation of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases) |
| BS 6798 | 額定輸入功率不超過70kW的燃氣鍋爐的安裝規范 | Specification for installation of gas-fired boilers of rated input not exceeding 70 kW net |
| BS 6880-1 | 輸出功率大于45kW的低溫熱水加熱系統實用規程.基本原理和設計 | Code of practice for low temperature hot water heating systems of output greater than 45 kW - Fundamental and design considerations |
| BS 6880-2 | 輸出功率大于45kW的低溫熱水加熱系統實用規程.設備選擇 | Code of practice for low temperature hot water heating systems of output greater than 45 kW - Selection of equipment |
| BS 6880-3 | 輸出功率大于45kW的低溫熱水加熱系統實用規程.安裝、交付使用和維護 | Code of practice for low temperature hot water heating systems of output greater than 45 kW - Installation, commissioning and maintenance |
| BS 6911-4 | 運土機械試驗.發動機試驗法規.凈功率 | Testing earth-moving machinery - Engine test code - Net power |
| BS 6999 | 最大輸出功率為45kW的固體燃料設備用搪瓷低碳鋼煙道管、其他部件和附件的規范 | Specification for vitreous-enamelled low-carbon-steel flue pipes , other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW |
| BS 7036-4 | 行人用動力門安全性實用規程.低功率旋轉門 | Code of practice for safety at powered doors for pedestrian use - Low energy swing doors |
| BS 7698-8 | 往復式內燃機驅動的交流發電機組.低功率發電機組要求和試驗 | Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets |
| BS 7821-4 | 小于36KV設備的帶有最高電壓值50Hz、50-2500KVA三相油浸式配電變壓器.載有非正弦電流的變壓器額定功率測定 | Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal currents |
| BS 7844-3 | 小于36KV設備的最高電壓值為50Hz、100-2500KVA三相干式配電變壓器.負載非正弦電流的變壓器額定功率的測定 | Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal current |
| BS 7854-3 | 機械振動.通過測量非旋轉零件對機械振動的評估.現場測量標稱功率在15kW以上、標稱轉速在120轉/分和15000轉/ | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ |
| BS 7854-6 | 機械振動.對非旋轉零件測量的機械振動評估.額定功率大于100KW的往復式機械 | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Reciprocating machines with power ratings above 100 kW |
| BS 7856 | 交流電設計實用規程,有功功率(1級和2級)瓦時表 | Code of practice for design of alternating current, watthour meters for active energy (classes 1 and 2) |
| BS 848-2.4 | 工業用風扇.標準化實驗室條件下的風扇聲功率級的測定.聲強法 | Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Sound intensity method |
| BS 89-3 | 直接指示模擬電工測量儀表及其輔助設備.第3部分:瓦特表和無功功率表的特殊要求規范 | Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for wattmeters and varmeters |
| BS 89-5 | 直接指示模擬電工測量儀表及其輔助設備.第5部分:相位表、功率因數表和同步指示器的特殊要求規范 | Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for phase meters, power factor meters and synchroscopes |
| BS 9133 N001 to 003 | 單旋非線繞小功率旋轉電位器詳細規范.與電阻元件絕緣的主軸、主軸和密封儀表板或容器、主軸和密封儀表板.全 | Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full assessment level |
| BS 9133 | 經質量評定的單匝小功率旋轉式電位器詳細規范編制規則 | Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality |
| BS 9300 C379-388 | 安裝于硅螺桿上的大功率整流器二極管詳細規范 | Detail specifications for silicon stud mounted, power rectifier diodes |
| BS 9364 N007 and N009 | 小功率硅N-P-N型開關晶體管詳細規范.20V、平面外延、額定環境條件、密封封裝.全面附加評定級 | Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 9364 N008 and N010 | 小功率硅N-P-N型開關晶體管詳細規范.20V、平面外延、額定環境條件、密封封裝(長引線型).全面附加評定級 | Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level |
| BS 9364 N011 | 小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝、全面附加評定級 | Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 9364 N012 | 小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝(長引線型).全面和附加評估級 | Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level |
| BS 9364 N013 | 小功率硅P-N-P型開關晶體管詳細規范.25V、平面外延、額定環境條件、密封封裝、全面附加評定級 | Detail specification for low power silicon p-n-p switching transistors - 25 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 9364 N016 | 小功率硅P-N-P型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝.全面附加評定級 | Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level |
| BS 9364 N017 | 小功率硅n-p-n型開關晶體管詳細規范.65V、平面外延、額定環境條件、密封封裝(長引線型).全面附加評定級 | Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level |
| BS 9925-03.0 | 電子元器件用經質量評估的協調體系.通信用電感器和變壓器磁心.第3部分:分規范:功率用變壓器和扼流圈的磁氧 | Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: Magnetic oxide cores for transformers and chokes for power applications |
| BS 9925-03.01 | 電子元器件用質量評估協調體系.通信用電感器和變壓器磁心.第3部分:空白詳細規范:功率用變壓器和扼流圈磁氧 | Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for transformers and chokes for power applications - Assessment level A |
| BS 9940-01.0 | 電子元器件用質量評估協調體系.電子設備用固定電阻器. 第1部分:分規范:低功率非線繞固定電阻器 | Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed low power non-wirewound resistors |
| BS 9940-01.01 | 電子元器件用質量評估協調體系.電子設備用固定電阻器.第1部分:空白詳細規范:低功率非線繞固定電阻器.第1節: | Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed low power non-wirewound resistors - Assessment level E |
| BS AU 215-3 | 動力輸出裝置.第3部分:商用道路車輛安裝在尾部的功率輸出裝置的連接件尺寸規范 | Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles |
| BS CECC 25300 | 電子元器件用質量評估協調體系.分規范.功率用磁性氧化物磁心 | Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for power applications |
| BS CECC 40101 019 | 固定小功率非繞線絕緣電阻器詳細規范.螺旋形切割金屬氧化物薄膜.全面評定級 | Detail specification for fixed low power non-wirewound insulated resistors - Metal oxide film, helically cut - Full assessment level |
| BS CECC 41200 | 電子元器件用質量評估協調體系.分規范.功率電位器 | Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers |
| BS CECC 41201 | 電子元器件用質量評估協調體系規范.空白詳細規范:功率電位器(S級評估) | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: power potentiometers (assessment level S) |
| BS CECC 41202 | 電子元器件用質量評估協調體系規范.空白詳細規范:功率電位器(M級評估) | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: power potentiometers (assessment level M) |
| BS CECC 41300 | 電子元器件用質量評估協調體系.分規范.小功率單圈旋轉電位器 | Harmonized system of quality assessment for electronic components - Sectional specification: low power single-turn rotary potentiometers |
| BS CECC 41301 | 電子元器件用質量評估協調體系規范.空白詳細規范:小功率單圈旋轉電位器(S級評估) | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: low power single turn rotary potentiometers (assessment level S) |
| BS CECC 41302 | 電子元器件用質量評估協調體系規范.空白詳細規范:小功率單圈旋轉電位器(M級評估) | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: low power single turn rotary potentiometers (assessment level M) |
| BS CECC 45004 | 電子元器件用質量評估協調體系規范.空白詳細規范:盤形密封功率管 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: disc seal power tubes |
| BS CECC 90103 | 電子元件質量評定的協調系統規范.類規范.54LS、64LS、74LS、84LS 系列的 數字式集成TTL小功率SCHOTTKY電路 | Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS |
| BS DD ENV 12102 | 帶電驅動壓縮機的空調、加熱泵和除濕器.空氣噪聲的測量.聲功率水平的測定 | Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level |
| BS DD IEC/TS 61400-14 | 風輪機.表面聲功率級和音調值聲明 | Wind turbines - Declaration of apparent sound power level and tonality values |
| BS E9065 | 電子元器件用質量評估協調體系規范.空白詳細規范.陽極消耗可達1kW的小功率發射管 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW |
| BS EN 1020 | 借助風扇傳輸燃氣和/或燃燒產物的空間加熱凈加熱輸入功率不超過300KW的非家用燃氣強制對流空氣加熱器 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products |
| BS EN 12736 | 電力驅動的道路車輛.用運載工具車上帶的充電器充電過程中車輛在空中發出的噪聲.聲功率水平的測定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
| BS EN 135001 | 電子元器件質量保證協調體系.空白詳細規范.功率小于500瓦的C、W功率行波管放大器 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: CW power amplifier travelling wave tubes up to 500 watts |
| BS EN 140101 | 電子元器件質量評定協調體系.低功率非線繞固定電阻器空白詳細規范(評定等級 S) | Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wire wound resistors (assessment level S) |
| BS EN 140102 | 電子元器件質量評定協調體系.空白詳細規范:固定低功率非線繞電阻器(評定等級M) | Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wirewound resistors (assessment level M) |
| BS EN 140103 | 電子元器件質量評定協調體系.空白詳細規范:固定低功率非線繞電阻器(評定等級P) | Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed low power non-wirewound resistors (Assessment level P) |
| BS EN 140104 | 電子元器件質量評定協調體系.空白詳細規范:固定低功率非線繞電阻器(評定等級SB和SC) | Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wirewound resistors (Assessment levels SB and SC) |
| BS EN 140211 | 電氣元器件質量評定協調體系規范.空白詳細規范.固定功率電阻.能力鑒定 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed power resistors - Capability approval |
| BS EN 140400 | 電子元器件質量評定協調系統.分規范.低功率表面安裝的固定電阻器 | Harmonized system of quality assessment for electronic components - Sectional specification - Fixed low power surface mount (SMD) resistors |
| BS EN 140401 | 空白詳細規格:低功率非線繞表面安裝的固定電阻器 | Blank detail specification - Fixed low power non wire-wound surface mount (SMD) resistors |
| BS EN 140401-801 | 詳細規范.低功率非線繞表面安裝電阻器.矩形. 0.1、0.25、0.5和1級別的穩定性 | Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5 ; 1 |
| BS EN 140401-802 | 詳細規范.低功率非線繞表面安裝的固定電阻器.矩形.1和2級別的穩定性 | Detail Specification: Fixed low power non wire-wound surface mount(SMD) resistors - Rectangular - Stability classes 1; 2 |
| BS EN 140401-803 | 詳細規范.低功率非線繞表面安裝的固定電阻器.矩形.0.05、0.1、0.25、0.5、1和2級別的穩定性 | Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0 ,25; 0,5; 1; 2 |
| BS EN 140402 | 電子元器件質量評定協調系統.空白詳細規范:低功率線繞表面安裝(SMD) 固定電阻器 | Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power wire wound surface mounting (SMD) resistors |
| BS EN 140402-801 | 詳細規范:固定低功率線繞表面安裝(SMD)電阻器.矩形.穩定性等級0.5、1、2 | Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 |
| BS EN 190103 | 電子元器件質量評定協調體系規范.系列規范:數字集成TTL小功率肖特基電路系列54LS、64LS、74LS、84LS | Specification for harmonized system of quality assessment for electronic components - Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS |
| BS EN 190106 | 電子元器件質量評定協調體系規范.系列規范:TTL改進的小功率肖特基數字集成電路系列54ALS、74ALS | Specification for harmonized system of quality assessment for electronic components - Family specification - TTL advanced low power SCHOTTKY digital integrated circuits series 54 ALS, 74 ALS |
| BS EN 2591-603 | 電氣和光學連接元件.試驗方法.光學元件.功率分配的變化 | Elements of electrical and optical connection - Test methods - Optical elements - Change of power distribution |
| BS EN 29775 | 小船.15KW-40KW功率單外舷電動機遠程操縱系統 | Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power |
| BS EN 45510-2-4 | 發電站設備采購指南.電氣設備.高功率靜態轉換器.第4部分:高功率靜態轉換器 | Guide for the procurement of power station equipment - Electrical equipment - High power static convertors - Section 4: High power static convertors |
| BS EN 50294 | 鎮流管電路的全部輸入功率的測量方法 | Measurement method of total input power of ballast-lamp circuits |
| BS EN 50324-2 | 陶瓷材料和元件的壓電性能.測量方法.低功率 | Piezoelectric properties of ceramic materials and components - Methods of measurement - Low power |
| BS EN 50324-3 | 陶瓷材料和元件的壓電性能.測量方法.高功率 | Piezoelectric properties of ceramic materials and components - Methods of measurement - High power |
| BS EN 50328 | 鐵路設施.固定式裝置.變電站用電子功率變換器 | Railway applications - Fixed installations - Electronic power convertors for substations |
| BS EN 50371 | 證明與暴露在電磁場(10 MHz - 300 GHz)中人體有關的有基本限制的低功率電子和電氣設備合格的通用標準.一般 | Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public |
| BS EN 55016-1-3 | 無線電干擾和抗擾測量儀器和方法規范.無線電干擾和抗擾測量儀器.輔助設備.干擾功率 | Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power |
| BS EN 55016-2-2 | 無線電干擾和抗擾測量儀器和方法規范.干擾和抗擾測量方法.干擾功率測量 | Specification for radio disturbance and immunity measuring apparatus and methods - Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| BS EN 60204-11 | 機械的安全性.機器的電氣設備.電壓大于1000V交流電或1500V直流電和功率不超過36KV的高壓設備的要求 | Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV |
| BS EN 60268-16 | 音響系統設備.用語音傳輸系數測定語音清晰度的目標額定功率 | Sound system equipment - Objective rating of speech intelligibility by speech transmission index |
| BS EN 60654-2 | 工業過程測量和控制設備工作條件.功率 | Operating conditions for industrial-process measurement and control equipment - Power |
| BS EN 60835-3-6 | 數字微波無線電發射系統使用設備測量方法.衛星地面站測量.大功率放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Measurements on satellite earth stations - High-power amplifiers |
| BS EN 61000-4-30 | 電磁兼容性(EMC).試驗和測量技術.功率等級測量方法 | Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods |
| BS EN 61040 | 激光輻射功率和能量探測器、儀表和設備規范 | Specification for power and energy measuring detectors, instruments and equipment for laser radiation |
| BS EN 61161 | 液體頻率范圍為0.5MHz-25MHz的超聲波功率測量規范 | Specification for ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz |
| BS EN 61173 | 光電功率發生系統過壓保護導則 | Overvoltage protection for photovoltaic (PV) power generating systems - Guide |
| BS EN 61277 | 地面光電功率發生裝置.總則和指南 | Terrestial photovoltaic (PV) power generating systems - General and guide |
| BS EN 61280-1-1 | 光纖放大器.基本光譜分析儀.單模光纖電纜用發射機光輸出功率測量 | Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable |
| BS EN 61290-1-3 | 光學放大器.試驗方法.功率和增益參數.光功率計法 | Optical amplifiers — Test methods — Part 1-3: Power and gain parameters — Optical power meter method |
| BS EN 61300-3-31 | 光纖互連器件和無源元件.基本試驗和測量程序.檢驗和測量.光纖光源的耦合功率比測量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Coupled power ratio measurement for fibre optic sources |
| BS EN 61307 | 工業微波加熱裝置.輸出功率測定的試驗方法 | Industrial microwave heating installations - Test methods for the determination of power output |
| BS EN 61315 | 光纖功率計校正 | Calibration of fibre-optic power meters |
| BS EN 61523-1 | 延遲計算和功率計算標準.集成電路延遲計算和功率計算系統 | Delay and power calculation standards - Integrated circuit delay and power calculation systems |
| BS EN 61523-2 | 延遲計算和功率計算標準.CMOS集成電路子程序庫.預布局延遲計算規范 | Delay and power calculation standards - Pre-layout delay calculation specification for CMOS ASIC libraries |
| BS EN 61580-8 | 波導管測量方法.波導管功率保持性 | Methods of measurement for waveguides - Waveguide power holding capability |
| BS EN 61683 | 光電系統.電功率調節器.效能測量程序 | Photovoltaic systems - Power conditioners - Procedure for measuring efficiency |
| BS EN 61803 | 高壓直接電流(HVDC)轉換站功率損失的測定 | Determination of power losses in high-voltage direct current (HVDC) converter stations |
| BS EN 61922 | 高頻感應加熱裝置.測定發生器功率輸出的試驗方法 | High-frequency induction heating installations - Test methods for the determination of power output of the generator |
| BS EN 62018 | 信息技術設備的功率消耗.測量方法 | Power consumption of information technology equipment - Measurement methods |
| BS EN 621 | 不用風扇傳輸燃氣和/或燃燒產物的空間加熱凈加熱輸入功率不超過300KW的非家用燃氣強制對流空氣加熱器 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 778 | 不用風扇傳輸燃氣和/或燃燒產物的空間凈加熱輸入功率不超過70kW的家用燃氣強制對流空氣加熱器 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN ISO 11203 | 聲學.機械裝置及設備發出的噪聲.在工作地點和其它試驗場所從聲功率級測量聲壓級 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| BS EN ISO 11592 | 小于8米長艇身的小艇.最大推動功率的測定 | Small craft less than 8 m length of hull - Determination of maximum propulsion power rating |
| BS EN ISO 3741 | 聲學.用聲壓測定噪聲源聲音功率級.混響室內的精密方法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms |
| BS EN ISO 3743-1 | 聲學.噪聲源聲功率級的測定.在混響聲場中小聲源和移動聲源的工程測量方法.第1部分:硬墻試驗室的比較分析法 | Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Comparison for hard-walled test rooms |
| BS EN ISO 3743-2 | 聲學.噪聲源的聲功率級測定.在混響場中對可移動聲源的工程測量方法.用專用混響試驗室的測量方法 | Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms |
| BS EN ISO 3744 | 聲學.用聲壓力測定噪聲源的聲功率級.在聲音反射平面上基本自由場中的測量方法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane |
| BS EN ISO 3745 | 聲學.用聲壓法測定噪聲源聲功率級.消聲室和半消聲室精密法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms |
| BS EN ISO 3746 | 聲學.用噪聲壓力測定噪聲功率級.在反射平面上利用包封測量表面的測量法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
| BS EN ISO 3747 | 聲學.聲壓法測定噪聲源的聲功率級.現場比較法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ |
| BS EN ISO 5135 | 聲學.通過混響室測定空調終端設備、空調終端裝置、阻尼器和閥門噪音的聲音功率級 | Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
| BS EN ISO 5136 | 聲學.風機和其他鼓風裝置吹到管道中的聲功率的測定.管道法 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method |
| BS EN ISO 6185-1 | 充氣艇.電機最大額定功率為4.5KW的小艇 | Inflatable boats - Boats with a maximum motor power rating of 4,5 kW |
| BS EN ISO 6185-2 | 充氣艇.電動機最大額定功率為4.5KW至15KW的小艇 | Inflatable boats - Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive |
| BS EN ISO 6185-3 | 充氣艇.最大電動機功率為15KW及其以上的小氣艇 | Inflatable boats - Boats with maximum motor power rating of 15 kW and greater |
| BS EN ISO 6926 | 聲學.聲功率級測定用基準聲源的性能和校正要求 | Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels |
| BS EN ISO 9614-1 | 聲學.利用聲音強度測定噪聲源功率級.第1部分:離散點測量 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement at discrete points |
| BS EN ISO 9614-2 | 聲學.利用聲強度對噪聲源聲功率級別的測定.使用掃描測量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement by scanning |
| BS EN ISO 9614-3 | 聲學.利用聲強度對噪聲源聲功率級別進行的測定.使用掃描精確測量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Precision method for measurement by scanning |
| BS G 248 | 混合式遙控功率控制器規范.一般要求 | Specification for hybrid remote power controllers - General requirements |
| BS G 249 | 固態遙控功率控制器規范.一般要求 | Specification for solid-state remote power controllers - General requirements |
| BS IEC 60747-8 | 分立半導體器件和集成電路.場效應晶體管.電源轉換場效應晶體管測量方法中附加功率、特性和amds | Discrete semiconductor devices and integrated circuits - Field-effect transistors - Additional ratings and characteristics and amds in the measuring methods for power switching field effect transistors |
| BS IEC 61523-3 | 延遲和功率計算標準.電子設計過程用標準延遲格式(SDF) | Delay and power calculation standards - Standard delay formaty (SDF) for the electronic design process |
| BS ISO 13347-1 | 工業風扇.標準實驗室條件下風扇聲功率級的測定.總論 | Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - General overview |
| BS ISO 13347-2 | 工業風扇.標準實驗室條件下風扇聲功率級的測定.混響室法 | Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Reverberant room method |
| BS ISO 13347-3 | 工業風扇.標準實驗室條件下風扇聲功率級的測定.包絡面法 | Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Enveloping surface method |
| BS ISO 13347-4 | 工業用風扇.標準化實驗室條件下風扇聲功率級的測定.聲強法 | Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Sound intensity method |
| BS ISO 14396 | 往復式內燃機.內燃機功率的測定和內燃機功率測量的試驗方法.符合ISO 8178的廢氣排放試驗的補充要求 | Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178 |
| BS ISO 15550 | 內燃機.測量發動機功率的測定方法.總要求 | Internal combustion engines - Determination and method for the measurement of engine power - General requirements |
| BS ISO 16902-1 | 液壓傳動.用聲強法測定聲功率級的試驗規程.工程法.泵 | Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps |
| BS ISO 2534 | 道路車輛.發動機試車法規.總功率 | Road vehicles - Engine test code - Gross power |
| BS ISO 3046-1 | 往復式內燃機.性能.功率、燃料消耗量和潤滑油消耗量和試驗方法說明.通用內燃機的附加要求 | Reciprocating internal combustion engines - Performance - Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use |
| BS ISO 6926 | 聲學.聲功率級測定用基準聲源的性能和校正要求 | Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels |
| BS ISO 7919-2 | 非往復式機器的機械振動.旋轉軸的測量和評定標準.陸地安裝,功率超過50MW,正常運轉速度為1500r/min、1800r/m | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 8528-1 | 往復式內燃機驅動的交流發電機組.應用、額定功率和性能 | Reciprocating internal combustion engine driven alternating current generating sets - Application, ratings and performance |
| BS QC 400102 | 電子元器件質量評估協調體系規范.電子設備用固定電阻器.空白詳細規范.低功率非線繞固定電阻器.評估等級F | Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification - Fixed low-power non-wirewound resistors - Assessment level F |
| BS QC 400200 | 電子元器件質量評估的協調體系.電氣設備用固定電阻.分規范:固定式功率電阻器 | Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed power resistors |
| BS QC 400201 | 電子元件質量評估協調系統.電氣設備用固定電阻器.空白細則規范:固定式功率電阻器.評估等級E | Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed power resistors - Assessment level E |
| BS QC 400202 | 電子元器件質量評估協調體系規范.電子設備用固定電阻器.空白詳細規范.固定式功率電阻器.評估等級F | Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification - Fixed power resistors - Assessment level F |
| BS QC 400203 | 電子設備用固定電阻器規范.空白詳細規范.固定功率電阻器、散熱片型.評估等級H | Specification for fixed resistors for use in electronic equipment - Blank detail specification - Fixed power resistors, heat-sink types - Assessment level H |
| BS QC 410200 | 電子元器件質量評估協調體系.電子設備用電位器.單匝旋轉功率電位器分規范 | Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification for single-turn rotary power potentiometers |
| BS QC 410203 | 電子元器件質量評估協調體系規.電子設備用電位器.空白詳細規范:單匝旋轉功率電位計.評估等級E | Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary power potentiometers - Assessment level E |
| BS QC 410204 | 電子元器件質量評估協調體系規.電子設備用電位器.空白詳細規范:單匝旋轉功率電位計.評估等級F | Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary power potentiometers - Assessment level F |
| BS QC 410300 | 電子元器件質量評估協調體系.電子設備用電位器.單匝旋轉低功率線繞和非線繞電位器分規范 | Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification for single-turn rotary low-power wirewound and non-wirewound potentiometers |
| BS QC 410301 | 電子元器件質量評估協調體系規.電子設備用電位計.空白詳細規范:單匝旋轉功率電位計.評估等級E | Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary low-power potentiometers - Assessment level E |
| BS QC 410302 | 電子元器件質量評估協調體系規.電子設備用電位計.空白詳細規范:單匝旋轉低功率電位計.評估等級F | Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary low-power potentiometers - Assessment level F |
| BS QC 750106 | 電子元器件質量評估協調體系規范.半導體分立器件.空白詳細規范.用于外殼額定功率放大器應用的場效應晶體管 | Specification for harmonized system of quality assessment for electronic components - Semiconductor discrete devices - Blank detail specification - Field-effect transistors for case-rated power amplifier applications |
| BS QC 750112 | 電子元器件質量評估協調體系.空白詳細規范.半導體器件.分立器件.場效應晶體管.功率達5W和1GHz的單柵場效應 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Semiconductor devices - Discrete devices - Field-effect transistors - Blank detail specification for single-gate field-effect transistors, up to 5 W and 1 GHz |
| 編號 | 中文名稱 | 英文名稱 |