微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI PH3.58 | 攝影用大功率立方閃光燈(電池控制)的尺寸 | Dimensions for Photographic High-Power Cubes (Battery Operated) |
| ANSI PH7.3 | 用于演講的教學視聽設備的有效輸出功率頻帶寬度的測量方法 | Method for Measuring Effective Output Power Bandwidth for Institutional Audio-Visual Equipment Used Primarily for Speech |
| ANSI S12.12 | 根據聲音強度測定噪聲源聲功率級的工程方法 | Engineering method for the determination of sound power levels of noise sources using sound intensity |
| ANSI S12.23 | 機械和設備發出的聲功率的表示方法 | Method for the Designation of Sound Power Emitted by Machinery and Equipment |
| ANSI S12.30 | 聲功率標準的使用導則和噪聲試驗規程的制定導則 | Guidelines for the use of sound power standards and for the preparation of noise test codes |
| ANSI S12.50 | 聲學.噪聲源的聲功率級的測定.基本標準使用指南 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
| ANSI S12.53/1 | 聲學.測定噪聲源的聲功率級.混響場內小型可移動聲源的工程法.第1部分:硬壁試驗室中的比較法 | Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 1: Comparison Method for Hard-Walled Test Rooms |
| ANSI S12.53/2 | 聲學.測定噪聲源的聲功率級.混響聲場內小型可移動聲源的工程法.第2部分:專用混響試驗室法 | Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 2: Methods for Special Reverberation Test Rooms |
| ANSI S12.54 | 聲學.聲壓法測定噪聲源的聲功率級.反射面上近似自由場的工程法 | Acoustics - Determination of Sound Power Levels of Noise Sources using Sound Pressure - Engineering Method in an Essentially Free Field over a Reflecting Plane |
| ANSI S12.56 | 聲學.聲壓法測定噪聲源聲功率級.反射面上包絡測量表面的測量方法 | Acoustics - Determination of Sound Power Levels of Noise Sources using Sound Pressure - Survey Method using an Enveloping Measurement Surface over a Reflecting Plane |
| ANSI S12.57 | 聲學.聲壓法測定聲源的聲功率級.現場比較法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ |
| ANSI T1.337 | 網絡電力傳輸系統的最大電壓、電流和功率級的要求 | Requirements for Maximum Voltage, Current, and Power Levels in Network-Powered Transport System |
| ANSI/AGMA 6035 | 工業球面蝸桿傳動機構的設計、額定功率和用途 | Design, Rating and Application of Industrial Globoidal Wormgearing |
| ANSI/AGMA 6135 | 工業球面蝸桿傳動機構的設計、額定功率和用途(米制版本) | Design, Rating and Application of Industrial Globoidal Wormgearing (Metric Edition) |
| ANSI/ANS 5.1 | 輕水反應堆衰變熱功率 | Light Water Reactors, Decay Heat Power in |
| ANSI/ASHRAE 68 | 風扇風道內測試聲功率測量程序的實驗室方法 | Laboratory Method of Testing In-Duct Sound Power Measurement Procedure for Fans (also designated ANSI/AMCA 330-86) |
| ANSI/ASTM D6201 | 進油閥沉積物形成用無鉛火花點火發動機燃料的功率計評價用試驗方法 | Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation |
| ANSI/CAGI ADF300 | 干塔（非回?zé)崾剑┟撍畨嚎s空氣干燥器.額定功率和試驗方法 | Single Tower (Non-Regenerative) Desiccant Compressed Air Dryers - Methods for Testing and Rating |
| ANSI/CAGI ADF700 | 膜式壓縮空氣干燥器.額定功率和試驗方法 | Membrane Compressed Air Dryers - Methods for Testing and Rating |
| ANSI/CEA 426-B | 全頻帶揚聲器功率額定值 | Loudspeakers, Power Rating, Full Range |
| ANSI/EIA 401 | 功率半導體設備用紙介質和紙/薄膜介質電容器 | Paper, Paper/Film Dielectric Capacitors for Power Semiconductor Applications |
| ANSI/EIA 426-B | 全頻程額定功率的揚聲器 | Loudspeakers, Power Rating, Full Range |
| ANSI/EIA 526-2 | 接入單模光纜的OFSTP-2發送器有效輸出功率 | OFSTP-2, Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable |
| ANSI/EIA 700BAAD | 通用系列總線加功率連接器系列"A"用屏蔽矩形連接器的詳細規范 | Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series "A" |
| ANSI/EIA 700BAAE | 通用系列總線加功率連接器系列"B"用屏蔽矩形連接器的詳細規范 | Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series"B" |
| ANSI/EIA-700BAAD | 通用系列總線插頭功率連接器系列"A"用屏蔽矩形連接器的詳細規范 | Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series "A" |
| ANSI/EIA-700BAAE | 通用系列總線插頭功率連接器系列"B"用屏蔽矩形連接器的詳細規范 | Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series"B" |
| ANSI/IEC/ASQ D1123 | 可靠性試驗.符合性試驗計劃的成功率 | Reliability Testing - Compliance Test Plans for Success Ratio |
| ANSI/IEEE 1573 | 電子大功率子系統的推薦規程:參數、接口、元件和性能 | Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance |
| ANSI/IEEE 388 | 電子功率變換設備中的變壓器和感應線圈 | Transformers and Inductors in Electronic Power Conversion Equipment |
| ANSI/IEEE 664 | 單根導線風吹震動阻尼器功率耗散特性的實驗室測量 | Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors |
| ANSI/IEEE 802.11h | 信息技術標準.系統間遠程通信和信息交換.局域網和城域網.特殊要求.第11部分:無線局域網媒體訪問控制(MAC)和 | Standard [for] Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Spectrum and Transmit Power Management Extensions in the 5 GHz Band in Europe |
| ANSI/IEEE 841 | 化學工業.功率達500hp及以下的全封閉扇冷卻式重載(TEFC)鼠籠式感應電動機 | Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 500 hp |
| ANSI/IEEE C37.26 | 低壓感應測試電路功率因數的測量方法 | Methods of Power-Factor-Measurement for Low-Voltage Inductive Test Circuits |
| ANSI/IEEE C57.136 | 額定功率大于500kVA的油浸式電力變壓器和并聯電抗器的聲級抑制和測定指南 | Guide for Sound Level Abatement & Determination for Liquid-Immersed Power Transformers & Shunt Reactors Rated Over 500 kVA |
| ANSI/INCITS/ISO/IEC 14443-2AMD 1 | 識別卡.無接觸點集成電路卡.近似卡.第2部分:射頻功率和信號.修改1:fc/64, fc/32 and fc/16畢特速率 | Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface - Amendment 1: Bit rates of fc/64, fc/32 and fc/16 |
| ANSI/ISO 3743-2 | 聲學.聲壓法測定噪聲源聲功率級.混響聲場中小型可移動聲源的工程檢測法.第2部分:專用混響試驗室法 | Acoustics - Determination of Sound Power Levels of Noise Sources - Engineering Methods for Small, Movable Sources in Reverberant Fields - Part 2: Methods for Special Reverberation Test Rooms |
| ANSI/ISO 3744 | 聲學.聲壓法測定噪聲源聲功率級.聲音反射平面上近似自由場中的工程檢測法 | Acoustics - Determination of Sound Power Levels of Noise Sources using Sound Pressure - Engineering Method in an Essentially Free Field over a Reflecting Plane |
| ANSI/ISO 3746 | 聲學.聲壓法測定噪聲源聲功率級.對聲音反射平面進行曲面包絡線測量方法 | Acoustics - Determination of Sound Power Levels of Noise Sources using Sound Pressure - Survey Method using an Enveloping Measurement Surface over a Reflecting Plane |
| ANSI/NEMA C119.1 | 額定功率600V 的密封絕緣地下連接器系統 | Sealed Insulated Underground Connector System Rated 600 Volts |
| ANSI/NEMA WC53 | 試驗用擠壓介電功率、控制、儀器儀表和輕便電纜的標準試驗方法 | Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
| ANSI/NFPA 1127 | 大功率火箭 | High Power Rocketry |
| ANSI/NSF 8(i4r2) | 大功率食品加工設備 | Comercial Powered Food Preparation Equipment |
| ANSI/SAE J1343 | 關于卡車和公共汽車發動機附件的負載循環和平均功率要求的信息 | Truck and Bus Engine Accessories, Information Relating to Duty Cycles and Average Power Requirements of |
| ANSI/SAE J2458 | 排氣閘功率計試驗和能力評級程序 | Exhaust Brake Dynamometer Test and Capability Rating Procedure |
| ANSI/SAE J721 | 拖拉機和功率輸出傳動的農機具的操縱要求 | Operating Requirements for Tractors and Power Take-Off Driven Implements |
| ANSI/SAE J820 | 起重機提升線速度和功率試驗規程 | Crane Hoist Line Speed and Power Test Code |
| ANSI/TIA-455-208 | FOTP208.IEC 61290-1-3.光纖放大器.基礎規范.第1-3部分:增益參數的測試方法.光功率計 | FOTP208- IEC 61290-1-3 - Optical Fibre Amplifiers - Basic Specification - Part 1-3: Test Methods for Gain Parameters - Optical Power Meter |
| ANSI/TIA-455-209 | FOTP209.IEC 61290-2-1.光纖放大器.基礎規范.第2-1部分:光功率參數的測試方法.光譜分析儀 | FOTP209 - IEC 61290-2-1 - Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer |
| ANSI/TIA-455-210 | FOTP209.IEC 61290-2-1.光纖放大器.基礎規范.第2-2部分:光功率參數的測試方法.電頻譜分析儀 | FOTP210-IEC 61290-2-2 - Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer |
| ANSI/TIA-455-211 | FOTP211.IEC 61290-2-3.光纖放大器.基礎規范.第2-3部分:光功率參數的測量方法.光功率計多路分解器 | FOTP211 - IEC 61290-2-3- Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter demultiplexer |
| ANSI/TIA-455-213 | FOTP213.IEC 61290-7-1.光纖放大器.基礎規范.第7-1部分:頻帶外插入損耗的測試方法.濾光光學功率計 | FOTP213 - IEC 61290-7-1 - Optical Fibre Amplifiers -Basic Specification - Part 7-1: Test Methods for Out-of-Band Insertion Losses - Filtered Optical Power Meter |
| ANSI/TIA-455-231 | IEC 61315.纖維光學功率計的校準 | IEC 61315 - Calibration of Fibre-Optic Power Meters |
| ANSI/TIA-455-80-C | 用傳輸功率測量未用電纜固定的單模光纖的截止波長 | Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA-455-95A | 光纖和光纜的絕對光功率試驗 | Absolute Optical Power Test for Optical Fibers and Cables |
| ANSI/TIA/EIA 455-208 | FOTP208-IEC 61290-1-3-光纖放大器. 基本規范 .第1-3部分: 增益參數測試方法.光功率計 | FOTP208- IEC 61290-1-3 - Optical Fibre Amplifiers - Basic Specification - Part 1-3: Test Methods for Gain Parameters - Optical Power Meter |
| ANSI/TIA/EIA 455-209 | FOTP209-IEC 61290-2-1-光纖放大器. 基本規范 .第2-1部分: 光功率參數測試方法.光頻譜分析儀 | FOTP209 - IEC 61290-2-1 - Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters - Optical Spectrum Analyzer |
| ANSI/TIA/EIA 455-210 | FOTP210-IEC 61290-2-2-光纖放大器. 基本規范 .第2-2部分: 光功率參數測試方法.電頻譜分析儀 | FOTP210-IEC 61290-2-2 - Optical Fibre Amplifiers - Basic Specification - Part 2-2: Test Methods for Optical Power Parameters - Electrical Spectrum Analyzer |
| ANSI/TIA/EIA 455-211 | FOTP211-IEC 61290-2-3-光纖放大器. 基本規范.第2-3部分: 光功率參數測試方法.光功率計多路分配器 | FOTP211 - IEC 61290-2-3- Optical Fibre Amplifiers - Basic Specification - Part 2-3: Test Methods for Optical Power Parameters - Optical Power Meter demultiplexer |
| ANSI/TIA/EIA 455-213 | FOTP213-IEC 61290-7-1-光纖放大器. 基本規范.第7-1部分:頻帶外插入損耗的測試方法.濾波光功率計 | FOTP213 - IEC 61290-7-1 - Optical Fibre Amplifiers -Basic Specification - Part 7-1: Test Methods for Out-of-Band Insertion Losses - Filtered Optical Power Meter |
| ANSI/TIA/EIA 455-80-C | 用傳輸功率測量未敷設的單模光纖電纜的截止波長 | Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA/EIA 455-80B | 用傳輸功率測量散單模纖維的截止波長 | Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA/EIA 455-95A | 光纖和電纜絕對光功率試驗 | Absolute Optical Power Test for Optical Fibers and Cables |
| ANSI/UL 13 | 有功率限制的電路電纜的安全標準 | Standard for Safety for Power-Limited Circuit Cables |
| ANSI/UL 1424 | 有限功率火災報警線路用電纜的安全標準 | Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits |
| ANSI/UL 508C | 功率轉換設備的安全性標準 | Standard for Safety for Power Conversion Equipment |
| ASME 3977-2 | 燃?xì)廨啓C(jī).采購.第2部分:標準參考條件和額定功率 | (Gas turbines - Procurement - Part 2: Standard reference conditions and ratings) |
| ASME PTC 19.8 | 裝置和儀器.第8部分:指示功率測量 | (Instruments and apparatus - Part 8: Measurement of indicated power) |
| ASTM B 77 | 電阻合金的熱電功率的測試方法 | Test Method for Thermoelectric Power of Electrical-Resistance Alloys |
| ASTM D 2758 | 使用發動機功率計測試發動機冷卻劑的標準試驗方法 | Standard Test Method for Engine Coolants by Engine Dynamometer |
| ASTM D 4336 | 測定機械泵計量器每行程輸出功率的標準試驗方法 | Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser |
| ASTM D 6201 | 進油閥沉積物形成用火花點燃式發動機無鉛燃料的功率計評定標準試驗方法 | Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 924 | 電絕緣液體的損耗因數(或功率因數)和相對電容率(介電常數)的標準試驗方法 | Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids |
| ASTM E 1124 | 用雙面法現場測量聲功率級的標準試驗方法 | Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method |
| ASTM E 387 | 用不透明濾光器評估色散分光光度計雜散輻射功率的標準試驗方法 | Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method |
| ASTM F 1334 | 測定真空吸塵器A-加重聲音功率級的標準試驗方法 | Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
| ASTM F 466 | 在0.2至2.0千兆赫頻率范圍內小功率晶體管的小信號散射參數的試驗方法 | Test Method for Small-Signal Scattering Parameters of Low-Power Transistors in the 0.2 to 2.0-GHz Frequency Range |
| IEEE 1158 | 高壓直流變電站功率損失測定用推薦規范 | (Recommended practice for determination of power losses in high-voltage direct current (HVDC) converter stations) |
| IEEE 1481 | 集成電路(IC)延遲和功率計算系統 | (Integrated Circuit (IC) delay and power calculation system) |
| IEEE 1515 | 電子大功率子系統的推薦規程:參數定義、試驗條件和方法 | (Recommended practice for electronic power subsystems: Parameter definitions, test conditions, and test methods) |
| IEEE 286 | 電機定子線圈絕緣的功率因數tip-up測量的推薦實施規程 | (Recommended practice for measurement of power factor tip-up of electric machinery stator coil insulation) |
| IEEE 388 | 電子功率轉換設備中的變壓器和電感線圈 | (Transformers and inductors in electronic power conversion equipment) |
| IEEE 510 | 高電壓及高功率安全性推薦規程 | (Recommended practices for safety in high-voltage and high-power testing) |
| IEEE C 37.26 | 低電壓電感試驗電路功率因數的測量方法指南 | (Guide for methods of power-factor measurement for low-voltage inductive test circuits) |
| IEEE C 57.136 | 額定功率大于500kVA的液浸式電力變壓器和并聯電抗器的聲級抑制和測定 | (Sound level abatement and determination for liquid-immersed power transformers and shunt reactors rated over 500 kVA) |
| UL 13 | 有功率限制的電路電纜 | (Power-limited circuit cables ) |
| 編號 | 中文名稱 | 英文名稱 |