    
返回首頁 | 公司簡介 | 人才招聘 | 在線報價 | 聯系我們 | 區域合作 |
|
返回首頁 | 公司簡介 | 人才招聘 | 在線報價 | 聯系我們 | 區域合作 |
相關查詢：
| 編號 | 中文名稱 | 英文名稱 |
| BS 185-9-1970 | .航空和航天術語詞匯.第9節:推進器 | (Glossary of aeronautical and astronautical terms - Propellers) |
| BS 1853-2-1995 | 普通照明用管形熒光燈.第2部分:除BS EN 60081, BS EN 60901, BS EN 61195 and BS EN 61199熒光燈外的英國國 | (Tubular fluorescent lamps for general lighting service - Specification for lamps used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS EN 61199) |
| BS 1858-2002 | 電纜.附件.瀝青基填充混合物 | (Electric cables - Accessories - Bitumen-based filling compounds) |
| BS 1868-1975 | 石油、石油化學及有關工業用鋼單向閥(有法蘭及對焊端)規范 | (Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
| BS 187-1978 | 硅酸鈣磚(灰砂磚和燧石磚)規范 | (Specification for calcium silicate (sandlime and flintlime) bricks) |
| BS 1872-1984 | 錫電鍍層規范 | (Specification for electroplated coatings of tin) |
| BS 1873-1975 | 石油、石油化學及有關工業用鋼球形閥、球形截止閥與單向閥(有法蘭及對接焊端)規范 | (Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
| BS 1876-1990 | 小便池自動沖洗水箱規范 | (Specification for automatic flushing cisterns for urinals) |
| BS 1877-10-1997 | 家用床上用品.第10部分:童床、搖籃童車及類似家用墊子規范 | (Domestic bedding - Specification for mattresses and bumpers for Children’s cots, perambulators and similar domestic articles) |
| BS 1877-8-1974 | 家庭床上用品規范.第8部分:家用枕頭和長枕頭(微孔橡膠枕頭和長枕頭除外) | (Domestic bedding - Pillows and bolsters for domestic use (excluding cellular rubber pillows and bolsters)) |
| BS 188-1976 | 液體粘度測定方法 | (Methods for determination of the viscosity of liquids) |
| BS 1881-112-1983 | 混凝土試驗.第112部分:立方體試塊的加速養護方法 | (Testing concrete - Methods of accelerated curing of test cubes) |
| BS 1881-113-1983 | 混凝土試驗.第113部分:無細料混凝土立方體試塊的制作和養護方法 | (Testing concrete - Method for making and curing no-fines test cubes) |
| BS 1881-119-1983 | 混凝土試驗.第119部分:用部分彎曲斷裂梁測定抗壓強度的方法(與立方體方法等效) | (Testing concrete - Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)) |
| BS 1881-121-1983 | 混凝土試驗.第121部分:靜態壓縮彈性模量的測定方法 | (Testing concrete - Method for determination of static modulus of elasticity in compression) |
| BS 1881-122-1983 | 混凝土試驗.第122部分:吸水性的測定方法 | (Testing concrete - Method for determination of water absorption) |
| BS 1881-124-1988 | 混凝土試驗.第124部分:硬結混凝土的分析方法 | (Testing concrete - Methods for analysis of hardened concrete) |
| BS 1881-125-1986 | 混凝土試驗.第125部分:實驗室新拌混凝土的拌合和取樣方法 | (Testing concrete - Methods for mixing and sampling fresh concrete in the laboratory) |
| BS 1881-127-1990 | 混凝土試驗.第127部分:采用比較立方體試驗法的混凝土立方體壓縮機的性能檢驗方法 | (Testing concrete - Method of verifying the performance of a concrete cube compression machine using the comparative cube test) |
| BS 1881-128-1997 | 混凝土試驗.第128部分:新攪拌混凝土的分析方法 | (Testing concrete - Methods for analysis of fresh concrete) |
| BS 1881-129-1992 | 混凝土試驗.第129部分:部分壓實半干新拌混凝土稠密度的測定方法 | (Testing concrete - Method for determination of density of partially compacted semi-dry fresh concrete) |
| BS 1881-130-1996 | 混凝土試驗.第130部分:混凝土試樣固化溫度對比方法 | (Testing concrete - Method for temperature-matched curing of concrete specimens) |
| BS 1881-131-1998 | 混凝土試驗.混凝土試樣中水泥含量的測試方法 | (Testing concrete - Methods for testing cement in a reference concrete) |
| BS 1881-201-1986 | 混凝土試驗.第201部分:硬結混凝土的無損試驗方法指南 | (Testing concrete - Guide to the use of non-destructive methods of test for hardened concrete) |
| BS 1881-203-1986 | 混凝土試驗.第203部分:混凝土的超聲波脈沖速度測量的推薦方法 | (Testing concrete - Recommendations for measurement of velocity of ultrasonic pulses in concrete) |
| BS 1881-204-1988 | 混凝土試驗.第204部分:電磁式保護層厚度計使用的推薦方法 | (Testing concrete - Recommendations on the use of electromagnetic covermeters) |
| BS 1881-205-1986 | 混凝土試驗.第205部分:混凝土的射線照相術推薦標準 | (Testing concrete - Recommendations for radiography of concrete) |
| BS 1881-206-1986 | 混凝土試驗.第206部分:混凝土應力測定的推薦方法 | (Testing concrete - Recommendations for determination of strain in concrete) |
| BS 1881-207-1992 | 混凝土試驗.第207部分:用接近面層試驗法對混凝土強度評定的推薦方法 | (Testing concrete - Recommendations for the assessment of concrete strength by near-to-surface tests) |
| BS 1881-208-1996 | 混凝土試驗.第208部分:混凝土的初期表面吸水性測定的推薦方法 | (Testing concrete - Recommendations for the determination of the initial surface absorption of concrete) |
| BS 1881-209-1990 | 混凝土試驗.第209部分:動態彈性模量測定的推薦方法 | (Testing concrete - Recommendations for the measurement of dynamic modulus of elasticity) |
| BS 1892-2.11-1989 | 體育館器械.特殊要求.訓練和比賽用網和支承滑軌規范 | (Gymnasium equipment - Particular requirements - Specification for practice and games netting and supporting trackways) |
| BS 1892-2.6-1986 | 體育館器械.第2部分:特殊要求.第6節:拳擊臺規范 | (Gymnasium equipment - Particular requirements - Specification for boxing rings) |
| BS 1892-2.9-1986 | 體育館器械.第2部分:特殊要求.第9節:舉重訓練設備規范 | (Gymnasium equipment - Particular requirements - Specification for weight training equipment) |
| BS 1892-3-2003 | 體育館器械.運動墊.體操用墊子、氣墊和落地處的防火安全要求規范 | (Gymnasium equipment - Sports mats - Specification for fire safety requirements for mats, mattresses and landing areas) |
| BS 1892-4-2003 | 體育館器械.運動墊.格斗用墊子規范 | (Gymnasium equipment - Sports mats - Specification for combat mats) |
| BS 1895-1973 | 醫院用有輪的金屬架屏風規范 | (Specification for metal-framed wheeled screens for use in hospitals) |
| BS 1896-1972 | 印相紙的尺寸規范 | (Specification for sizes of reprographic papers) |
| BS 1900-1976 | 副基準溫度計規范 | (Specification for secondary reference thermometers) |
| BS 1902-10.1-1993 | 耐火材料試驗方法.熔模鑄造外殼鑄模系統.高溫下抗變形能力的測定 | (Methods of testing refractory materials - Investment casting shell mould systems - Determination of resistance to deformation at elevated temperatures) |
| BS 1902-10.2-1994 | 耐火材料試驗方法.熔模鑄造外殼鑄模系統.高溫下透氣性和標準空氣流量的測定 | (Methods of testing refractory materials - Investment casting shell mould systems - Determination of permeability and standard air flow capacity at elevated temperatures) |
| BS 1902-11-1991 | 耐火材料試驗方法.第11部分:耐火灰漿和膩?zhàn)?/td> | (Methods of testing refractory materials - Refractory mortars and putties) |
| BS 1902-2.2-1974 | 耐火材料的試驗方法.第2部分:化學分析(濕法).第2節:含鉻材料的化學分析 | (Methods of testing refractory materials - Chemical analysis (wet methods) - Chemical analysis of chrome-bearing materials) |
| BS 1902-2.3 Addendum No. 1-197 | 耐火材料的試驗方法.第2部分:化學分析(濕法).第3節:鎂和白云石的化學分析.第1次修改 | (Methods of testing refractory materials - Chemical analysis (wet methods) - Determination of boron in magnesites) |
| BS 1902-3.0-1988 | 耐火材料的試驗方法.第3部分:一般特性和結構特性.第0節:說明 | (Methods of testing refractory materials - General and textural properties - Introduction) |
| BS 1902-3.1-1981 | 耐火材料的試驗方法.一般特性和結構特性.取樣導則 | (Methods of testing refractory materials - General and textural properties - Guidance on sampling) |
| BS 1902-3.10-1981 | 耐火材料的試驗方法.一般特性和結構特性.一氧化碳性的測定(1902-310法) | (Methods of testing refractory materials - General and textural properties - Determination of resistance to carbon monoxide (method 1902-310)) |
| BS 1902-3.11-1983 | 耐火材料的試驗方法.第3部分:一般特性和結構特性.第11節:耐火磚塊的尺寸與形狀的測量(1902-311法) | (Methods of testing refractory materials - General and textural properties - Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-311)) |
| BS 1902-3.13-1996 | 耐火材料的試驗方法.第3部分:一般特性和結構特性.耐火磚塊的外型缺陷和尺寸的測量.第13節:耐火磚塊的邊角缺 | (Methods of testing refractory materials - General and textural properties - Measurement of dimensions and external defects of refractory bricks - Corner and edge defects and other surface imperfection) |
| BS 1902-3.14-1996 | 耐火材料的試驗方法.一般特性和結構特性.水合趨勢的測定 | (Methods of testing refractory materials - General and textural properties - Determination of hydration tendency) |
| BS 1902-3.16-1990 | 耐火材料試驗方法.第3部分:一般特性和結構特性.第16節:氣孔尺寸分布情況的測定(1902-316法) | (Methods of testing refractory materials - General and textural properties - Determination of pore size distribution (method 1902-316)) |
| BS 1902-3.17-1990 | 耐火材料的試驗方法.第3部分:一般特性和結構特性.第17節:密實成型制品體積密度和堆集密度的測定(1902-317法 | (Methods of testing refractory materials - General and textural properties - Determination of volume and bulk density of dense shaped products (methods 1902-317)) |
| BS 1902-3.19-1996 | 耐火材料的試驗方法.一般特性和結構特性.耐火磚塊的外型缺陷和尺寸測量.尺寸及與圖形的一致性 | (Methods of testing refractory materials - General and textural properties - Measurement of dimensions and external defects of refractory bricks - Dimensions and conformity to drawings) |
| BS 1902-3.2-1981 | 耐火材料的試驗方法.一般特性和結構特性.試樣尺寸的測量 | (Methods of testing refractory materials - General and textural properties - Measurement of dimensions of specimens for testing (methods 1902-302)) |
| BS 1902-3.3-1981 | 耐火材料的試驗方法.第3部分:一般特性和結構特性.第3節:篩析(1902-303法) | (Methods of testing refractory materials - General and textural properties - Sieve analysis (methods 1902-303)) |
| BS 1902-3.5-1981 | 耐火材料的試驗方法.一般特性和結構特性.粉末密度的測定 | (Methods of testing refractory materials - General and textural properties - Determination of powder density (method 1902-305)) |
| BS 1902-4.0-1985 | 耐火材料的試驗方法.外加應力作用下測量的特性.說明 | (Methods of testing refractory materials - Properties measured under an applied stress - Introduction) |
| BS 1902-4.4-1985 | 耐火材料的試驗方法.第4部分:外加應力作用下測量的特性.第0節:引言 | (Methods of testing refractory materials. Properties measured under an applied stress. Introduction) |
| BS 1902-4.6-1985 | 耐火材料的試驗方法.第4部分:外加應力作用下測量的特性.第6節:環境溫度下耐磨性(環境溫度下磨損度指數)的測 | (Methods of testing refractory materials - Properties measured under an applied stress - Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (meth) |
| BS 1902-5.0-1992 | 耐火材料的試驗方法.耐火和熱特性.說明 | (Methods of testing refractory materials - Refractory and thermal properties - Introduction) |
| BS 1902-5.11-1986 | 耐火材料的試驗方法.第5部分:耐火和耐熱性.第11節:通過棱柱試驗測定耐熱剝離性(1902-511法) | (Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal spalling resistance by the prism test (method 1902-511)) |
| BS 1902-5.13-1984 | 耐火材料的試驗方法.第5部分:耐火和耐熱性.第13節:抗?fàn)t渣吸附性的測定(1902-513法) | (Methods of testing refractory materials - Refractory and thermal properties - Determination of resistance to attack by slag (method 1902-513)) |
| BS 1902-5.14-1992 | 耐火材料的試驗方法.耐火與耐熱性能.熱膨脹性的測定(溫度在1500℃以下)(方法1902-5.14) | (Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (temperatures up to 1500 ℃) (methods 1902-5.14)) |
| BS 1902-5.3-1990 | 耐火材料試驗方法.耐火和耐熱性.熱膨脹性的測定(1100℃水平法)(方法1902-503) | (Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (horizontal method to 1100 ℃) (method 1902-503)) |
| BS 1902-5.4-1990 | 耐火材料試驗方法.第5部分:耐火和耐熱性.第4節:大塊試件熱膨脹的測定(1902-504法) | (Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal expansion (for large test pieces) (method 1902-504)) |
| BS 1902-5.5-1992 | 耐火材料的試驗方法.耐火和耐熱性.引言 | (Methods of testing refractory materials. Refractory and thermal properties. Introduction) |
| BS 1902-5.8-1992 | 耐火材料的試驗方法.第5部分:耐火和耐熱性.第8部分:熱導率測定(拼合柱法)(方法1902-508) | (Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal conductivity (split column method) (method 1902-508)) |
| BS 1902-6-1986 | 耐火材料的試驗方法.第6部分:陶瓷纖維制品 | (Methods of testing refractory materials - Ceramic fibre products) |
| BS 1902-7.0-1987 | 耐火材料的試驗方法.用于整體結構的不定型耐火材料.說明和定義 | (Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Introduction and definitions) |
| BS 1902-7.1-1987 | 耐火材料的試驗方法.第7部分:用于整體結構的未成形耐火材料.第1節:取樣導則 | Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Guidance on sampling (of unshaped refractories) |
| BS 1902-7.2-1987 | 耐火材料的試驗方法.第7部分:用于整體結構的未成型耐火材料.第2節:供貨與接收貨時的材料試驗(1902-702法) | (Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Testing of material as supplied and received (method 1902-702)) |
| BS 1902-7.3-1987 | 耐火材料的試驗方法.第7部分:用于整體結構的未成型耐火材料.第3節:振動密實集澆注試件的制備(1902-703法) | Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Preparation of test pieces from dense castables by vibration (method 1902-703) |
| BS 1902-7.4-1987 | 耐火材料的試驗方法.第7部分:用于整體結構的未成型耐火材料.第4節:隔離澆注試件的制備(1902-704法) | (Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Preparation of test pieces from insulating castables (method 1902-704)) |
| BS 1902-7.5-1987 | 耐火材料的試驗方法.第7部分:用于整體結構的未成型耐火材料.第5節:可塑和夯筑混合試件的制備(1902-705法) | (Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Preparation of test pieces from mouldables and ramming mixes (method 1902-705)) |
| BS 1902-7.6-1987 | 耐火材料的試驗方法.第7部分:用于整體結構的未成型耐火材料.第6節:作為預制試件的材料試驗 | (Methods of testing refractory materials - Unshaped refractories used in monolithic construction - Testing of materials as preformed test pieces) |
| BS 1902-7.7-1987 | 耐火材料的試驗方法.第7部分:用于整體結構的未成型耐火材料.第0節:引言與定義 | (Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Introduction and definitions) |
| BS 1902-9.1-1987 | 耐火材料的試驗方法.第9部分:用儀器方法進行化學分析.第1節:硅酸鋁耐火材料的X射線熒光分析法 | (Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of alumino-silicate refractories by X-ray fluorescence) |
| BS 1902-9.2-1987 | 耐火材料試驗方法.第9部分:儀器化學分析法.第2節:用X射線熒光光譜法分析硅質耐火材料 | (Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of silica refractories by X-ray fluorescence) |
| BS 1902-9.3-1998 | 耐火材料的試驗方法.用儀器分析法進行化學分析.鉻的測定 | (Methods of testing refractory materials - Chemical analysis by instrumental methods - Determination of chromium (VI)) |
| BS 1903-1981 | 服裝工業用術語詞匯 | (Glossary of terms used by the clothing industry) |
| BS 1906-1952 | (空氣和水的)1/8in-1/4in公稱尺寸的軟管接頭規范 | (Specification for hose couplings (air and water) () |
| BS 1911-1990 | 硬肥皂規范 | (Specification for hard soap) |
| BS 1912-1990 | 肥皂片規范 | (Specification for soap flakes) |
| BS 1913-1990 | 軟肥皂規范 | (Specification for soft soap) |
| BS 1914-1990 | 香皂規范 | (Specification for toilet soap) |
| BS 1915-1968 | 幻燈機規范 | (Specification for still projectors) |
| BS 1917-1968 | 幻燈片和攝影軟片規范 | (Specification for slides and film strips) |
| BS 1918-1-1978 | 玻璃容器的精加工.第1部分:連續螺紋精加工規范 | (Glass container finishes - Specification for continuous thread finish) |
| BS 1918-2-1981 | 玻璃容器的精加工.第2部分:冠形蓋瓶口精加工規范 | (Glass container finishes - Specification for crown finish) |
| BS 1919-1-1993 | 弓鋸條.第1部分:手持式和機動式弓鋸條規范 | (Hacksaw blades - Specification for hand and machine hacksaw blades) |
| BS 1919-2-1995 | 鋸床鋼鋸條.第2部分:切割性能規范 | (Hacksaw blades - Specification for cutting performance) |
| BS 192-1-1996 | 開口扳手.第1部分:米制單位和統一單位 | (Open-ended wrenches - Metric and unified) |
| BS 192-2-1998 | 開口扳手.BS和惠氏螺紋 | (Open-ended wrenches - BS and Whitworth) |
| BS 1922-1987 | 藥用玻璃劑量量器規范 | (Specification for glass dispensing measures for pharmaceutical purposes) |
| BS 1924-1-1990 | 土木工程穩定材料.第1部分:材料穩定處理前的一般要求、取樣、試樣制備和試驗 | (Stabilized materials for civil engineering purposes - General requirements, sampling, sample preparation and tests on materials before stabilization) |
| BS 1924-2-1990 | 土木工程穩定材料.第2部分:水泥穩定和石灰穩定材料試驗方法 | (Stabilized materials for civil engineering purposes - Methods of test for cement-stabilized and lime-stabilized materials) |
| BS 1929-1953 | 內窺鏡與診斷儀器用燈的螺紋及外部尺寸規范 | (Specification for screw threads and external dimensions of lamps for endoscopic and diagnostic instruments) |
| BS 1932-2-1989 | 卷裝紗和線的強度試驗.第2部分:打結強度和鉤接強力的測定方法 | (Testing the strength of yarns and threads from packages - Methods for determination of knot strength and loop strength) |
| BS 1935-1972 | 多軸鉆頭用軸頭及可調接頭規范 | (Specification for spindle noses and adjustable adaptors for multi-spindle heads) |
| BS 1936-1-1952 | 螺紋切槽和退刀紋規范.第1部分:英制螺紋 | (Undercuts and runouts for screw threads - Inch screw threads) |
| BS 1936-2-1991 | 螺紋切槽和退刀紋規范.第2部分:ISO米制螺紋規范 | (Undercuts and runouts for screw threads - Specification for ISO metric screw threads) |
| BS 1937-1953 | 工程用棘輪搖鉆及鉆柱規范 | (Specification for engineers’ ratchet braces and drilling pillars) |
| BS 1940-1987 | 工業用丁酮(乙基甲基酮)規范 | (Specification for butanone (ethyl methyl ketone) for industrial use) |
| BS 1941-1993 | 工業用4甲基-2-戊酮(甲基異戊基甲酮)規范 | (Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use) |
| BS 1943-1989 | 木工鑿和扁鑿規范 | (Specification for woodworking chisels and gouges) |
| BS 1945-1971 | 加熱設備(煤氣、電力與燃油的)的爐欄規范 | (Specification for fireguards for heating appliances (gas, electric and oil-burning)) |
| BS 196-1961 | 電壓達250V單相交流電路用帶接地線的保護式不可反轉插頭、插座電纜藕合器與設備藕合器規范 | (Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts) |
| BS 1968-1953 | 球閥用浮球(銅)規范 | (Specification for floats for ballvalves (copper)) |
| BS 1970-2001 | 橡膠和PVC制成的熱水袋規范 | (Hot water bottles manufactured from rubber and PVC - Specification) |
| BS 1974-1953 | 鋁合金大鉚釘.(公稱直徑1/2英寸至1英寸)規范 | (Specification for large aluminium alloy rivets () |
| BS 1978-1965 | 手搖鉆規范 | (Specification for bit braces) |
| BS 1979-1985 | 精神病院用病房床架規范 | (Specification for hospital ward bedsteads for psychiatric hospitals) |
| BS 1981-1991 | 統一標準機、螺釘與螺母規范 | (Specification for unified machine screws and machine screw nuts) |
| BS 1982-0-1990 | 有機材料制成或含有有機材料的板條制品的耐霉性.第0部分:測定方法指南 | (Fungal resistance of panel products made of or containing materials of organic origin - Guide to methods for determination) |
| BS 1982-1-1990 | 有機材料制成或含有有機材料的板條制品的耐霉性.第1部分:抗木腐擔子菌性的測定方法 | (Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to wood-rotting Basidiomycetes) |
| BS 1982-2-1990 | 有機材料制成或含有有機材料的板條制品的耐霉性.第2部分:抗纖維素分解微真菌性的測定方法 | (Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to cellulose-decomposing microfungi) |
| BS 1982-3-1990 | 有機材料制成或含有有機材料的板條制品的耐霉性.第3部分:抗霉菌或抗霉性的測定方法 | (Fungal resistance of panel products made of or containing materials of organic origin - Methods for determination of resistance to mould or mildew) |
| BS 1983-1-1969 | 機床與便攜式電動工具用卡盤規范.刀具夾緊卡盤 | (Specification for chucks for machine tools and portable power tools - Tool-holding chucks) |
| BS 1983-2-1994 | 機床與輕便電動工具用卡盤.電動工件卡盤規范 | (Chucks for machine tools and portable power tools - Specification for workholding chucks, power operated) |
| BS 1983-3-1987 | 機床與輕便電動工具用卡盤規范.第3部分:電動工件卡盤的底爪用夾頭墊尺寸 | (Chucks for machine tools and portable power tools - Specification for dimensions of collet pads for base jaws of power operated workholding chucks) |
Copyright ? 2008 Worldwide Translation.
寬天下翻譯公司版權所有.Tel:010-83345348
? 相關文章
成功案例：
服務語言:
英語翻譯 | 西班牙語翻譯 | 法語翻譯 | 意大利語翻譯 | 韓語翻譯 | 葡萄牙語翻譯 | 德語翻譯 | 日語翻譯
技術標準翻譯
