微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A05-103 | 金屬鍍層.硫代乙酰胺腐蝕試驗(TAA試驗) | (METALLIC COATINGS. THIOACETAMIDE CORROSION TEST (TAA TEST). (EUROPEAN STANDARD EN ISO 4538).) |
| NF A05-105 | 金屬鍍層和其它無機物涂層.適用于儲存情況的腐蝕試驗一般規則 | (Metallic and other non-organic coatings. General rules for corrosion tests applicable for storage conditions.) |
| NF A49-880 | 鋼管.熱浸鍍鋅.管和管附件鍍層的化學分析 | (Steel tubes. Hot dip galvanization. Chemical analysis of the coating of tubes and tubular accessories.) |
| NF A81-325 | 焊條.非合金鋼和細晶粒鋼制惰性氣體保護鎢焊接用棒材,線材和鍍層 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A91-001 | 金屬和合金防腐蝕.表面處理、金屬和其他無機鍍層.詞匯. | (Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary.) |
| NF A91-010 | 金屬鍍層和表面處理.術語.分類.符號 | (Metallic coatings and surface treatments of metals. Terminology. Classification. Symbols.) |
| NF A91-012 | 金屬鍍層.易損件的金屬鍍層保護 | (METALLIC COATINGS. WEAR PARTS PROTECTED BY METALLIC COATINGS.) |
| NF A91-080 | 金屬鍍層.錫電鍍層.規范和試驗方法 | (Metallic coatings. Electroplated coatings of tin. Specification and test methods.) |
| NF A91-081 | 金屬鍍層.錫鎳合金電鍍層.規范和試驗方法 | (Metallic coatings. Electroplated coatings of tin-nickel alloy. Specification and test methods.) |
| NF A91-082 | 金屬鍍層.錫鉛合金電解沉淀.規范和試驗方法 | (METALLIC COATINGS. ELECTROPLATED COATINGS OF TIN-LEAD ALLOYS. SPECIFICATION AND TEST METHODS.) |
| NF A91-091 | 金屬鍍層.工業用的銀和銀合金電解沉淀 | (Metallic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes.) |
| NF A91-092-1 | 金屬鍍層.電解銀和電解合金鍍層的試驗方法.第1部分:鍍層厚度的測定 | (Metallic coatings. Test methods for electrodeposited silver and silver alloys coatings. Part 1 : determination of coating thickness.) |
| NF A91-092-2 | 金屬鍍層.電解銀和電解合金鍍層的試驗方法.第2部分:粘附試驗 | (Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 2 : adhesion tests.) |
| NF A91-094 | 金屬鍍層.工業用金和鍍金合金電鍍層 | (Metallic coatings. Electrodeposited gold and gold alloy coatings for engineering purposes.) |
| NF A91-095-1 | 金屬鍍層.金和金合金鍍層試驗方法:第1部分:鍍層厚度的測定 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : determination of coating thickness.) |
| NF A91-095-2 | 金屬鍍層.金和金合金鍍層試驗方法:第2部分:環境試驗 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : environmental tests.) |
| NF A91-095-3 | 金屬鍍層.金及金合金電鍍層的試驗方法.第3部分:孔隙率的陽極電解試驗 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 3 : electrographic tests for porosity.) |
| NF A91-095-4 | 金屬鍍層.金和金合金鍍層試驗方法:第4部分:金含量的測定 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 4 : determination of gold content.) |
| NF A91-095-5 | 金屬鍍層.金和金合金鍍層試驗方法:第5部分:粘附試驗 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 5 : adhesion tests.) |
| NF A91-095-6 | 金屬鍍層.電鍍金和金合金鍍層的測試方法.第6部分:殘留鹽類的測定 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 6 : determination of the presence of residual salts.) |
| NF A91-103 | 金屬鍍層.鍍鎳和鍍鉻的鋅合金零件的驗收條件 | (Metallic coatings. Acceptance conditions for nickel- and chromium-plated zinc alloy parts.) |
| NF A91-107 | 金屬鍍層.延展性的測量方法述評 | (METALLIC COATINGS. REVIEW OF METHODS OF MEASUREMENT OF DUCTILITY. (EUROPEAN STANDARD EN ISO 8401).) |
| NF A91-108 | 金屬鍍層.鍍層厚度的測量.掃描電子顯微鏡法 | (Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.) |
| NF A91-110 | 金屬和氧化物鍍層.鍍層厚度的測定.顯微鏡法 | (Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.) |
| NF A91-111 | 金屬鍍層.鍍層厚度的測量.陽極分解的電量計法 | (Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution.) |
| NF A91-112 | 磁性基質的非磁性鍍層.鍍層厚度的測量.磁性法 | (Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method.) |
| NF A91-113 | 非磁性基體金屬上的非導體鍍層.鍍層厚度的測量.渦流法 | (Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method.) |
| NF A91-114 | 金屬鍍層.鍍層厚度的測量.表面光法度輪廓儀法 | (Metallic coatings. Measurement of coating thickness. Profilometric method.) |
| NF A91-116 | 金屬鍍層.鍍層厚度的測定.X射線光譜測定法 | (Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods.) |
| NF A91-118 | 冶金和其他非有機鍍層.維氏硬度計和努氏顯微硬度試驗機 | (Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.) |
| NF A91-119 | 鉻電解鍍層.電解腐蝕試驗.(EC試驗) | (Electrodeposited chromium coatings. Electrolytic corrosion testing. (EC test).) |
| NF A91-120 | 磁性和非磁性基質的鎳電鍍層.鍍層厚度的測量.磁性法(歐洲標準EN ISO 2361) | (Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method.) |
| NF A91-123 | 金屬鍍層.鐵類材料的熱浸鍍鋅涂層.用重量測定法測定單位面積重量 | (METALLIC COATINGS. HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS. GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA. (EUROPEAN STANDARD EN ISO 1460).) |
| NF A91-124 | 金屬鍍層.熱浸鍍鋅.粘結強度試驗法 | (Metallic coatings - Galvanization by immersion in molten zinc (hot-dip galvanizing) - Adhesion test methods.) |
| NF A91-131 | 熱鍍鋅鋼絲.鋅鍍層的規范 | (HOT-GALVANIZED STEEL WIRE. ZINC COATING SPECIFICATION.) |
| NF A91-140 | 金屬基質上的金屬鍍層.電鍍層和化學沉積層.試驗附著力的方法述評 | (METALLIC COATINGS ON METALLIC SUBSTRATES. ELECTRODEPOSITED AND CHEMICALLY DEPOSITED COATINGS. REVIEW OF METHODS AVAILABLE FOR TESTING ADHESION. (EUROPEAN STANDARD EN ISO 2819).) |
| NF A91-148 | 金屬鍍層.孔隙試驗.潮濕硫試驗. | (METALLIC COATINGS. POROSITY TESTS. HUMID SULFUR (FLOWERS OF SULFUR) TEST. (EUROPEAN STANDARD EN ISO 12687).) |
| NF A91-149 | 金屬鍍層.孔隙試驗.電圖記錄金屬基質上金和鈀涂層的孔隙度 | (Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.) |
| NF A91-150 | 金屬鍍層.孔隙試驗.通過亞硫酸和二氧化硫蒸氣的金和鈀涂層的孔隙度 | (Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour.) |
| NF A91-220 | 熱噴鍍.熱噴鍍層的特征和檢驗 | (Thermal spraying - Characterization and testing of thermally sprayed coatings.) |
| NF A91-450 | 鋁及其合金的陽極氧化.鋁的陽極氧化物鍍層的一般規范 | (Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium.) |
| NF A91-472 | 鋅或鎘電解沉積物的鉻酸鹽轉化鍍層.規范和試驗方法 | (Chromate conversion coatings on zinc or cadmium electrodeposits. Specifications and test methods.) |
| NF C20-131 | 鋁導線用帶導電鍍層的有鋁片或銅片的接頭.規則和尺寸 | (LUGS WITH COPPER OR ALUMINIUM FLATS AND WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.) |
| NF E25-009 | 緊固件.電鍍層 | (Fasteners - Electroplated coatings.) |
| NF L52-250-506 | 航空航天系列.飛行器用電纜.試驗方法.第506部分:鍍層連續性 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506 : plating continuity.) |
| NF L52-250-507 | 航空航天系列.飛行器用電纜.試驗方法.第507部分:鍍層的粘結強度 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507 : adherence of plating.) |
| NF P37-101 | 屋頂附件.銅部件的熱鍍錫層.鍍層規范 | (ROOF FITTINGS. FIRE TINNED FINISH OF COPPER PARTS. FINISH SPECIFICATIONS.) |
| NF S80-771 | 鐘表業.手表殼和鐘表零件合金鍍層的一般特性 | (Horology. General requirements for gold alloy coverings on watch cases and horological components.) |
| NF S80-772 | 鐘表制造.鍍層的試驗方法 | (HOROLOGY. GOLD-PLATED WATCH-CASES. TEST METHODS FOR COATINGS.) |
| NF S86-306 | 時間測量?jī)x表.輻射發光鍍層檢驗條件 | (Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits.) |
| NF T37-001-1 | 鍍金屬線圈.試驗方法.第1部分:鍍層厚度 | (Coil coated metals - Test methods - Part 1 : coating thickness.) |
| 編號 | 中文名稱 | 英文名稱 |