微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF C46-401 | 工業過程控制系統用模擬信號控制器.第1部分:性能評估方法 | (Controllers with analogue signals for use in industrial-process control systems. Part 1 : methods of evaluating the performance.) |
| NF C46-402 | 工業過程控制系統中用模擬信號控制器.第2部分:檢驗和常規試驗指南 | (Controllers with analogue signals for use in industrial-process control systems. Part 2 : guidance for inspection and routine testing.) |
| NF C46-421 | 工業過程控制系統.鑒定用自適應控制器的分類 | (Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation.) |
| NF C46-500 | 工業過程控制系統.帶氣壓輸出的閥位控制器性能評估方法 | (Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs.) |
| NF C46-603 | 發送器,致動器和可編程序控制器間信息交換用文件傳送協議總線.數據鏈層 | (Fip bus for exchange of information between transmitters, actuators and programmable controllers. Data link layer.) |
| NF C46-613 | 可編程控制器.第1部分:一般信息 | (Programmable controllers. Part 1 : general information.) |
| NF C46-614 | 程序控制器.第2部分:設備要求和試驗 | (Programmable controllers. Part 2 : equipment requirements and test.) |
| NF C46-614/A2 | 程序控制器.第2部分:設備要求和試驗 | (Programmable controllers - Part 2 : equipment requirements and test.) |
| NF C46-615 | 程序控制器.第3部分:程序設計語言 | (Programmable controllers - Part 3 : programming languages.) |
| NF C46-617 | 可編程控制器.第5部分:通信 | (Programmable controllers - Part 5 : communications.) |
| NF C46-619 | 可編程控制器.第7部分:模糊控制編程 | (Programmable controllers - Part 7 : fuzzy control programming.) |
| NF C46-660-1 | 控制器裝置接口用的基于ISO 11898的工業通信子系統.第1部分:一般要求 | (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1 : general requirements.) |
| NF C46-660-3 | 控制器裝置接口用的基于ISO 11898的工業通信子系統.第3部分:智能分布系統 | (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 3 : Smart Distributed System (SDS).) |
| NF C46-660-4 | 控制器裝置接口用的基于ISO 11898的工業通信子系統.第4部分:CANopen | (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4 : CANopen.) |
| NF C47-734/A2 | 家用和類似用途的自動電控制器.第2-4部分:密封和半密封電動壓縮機組的電動機熱保護器的特殊要求 | (Automatic electrical controls for household and similar use - Part 2-4 : particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type.) |
| NF C47-735 | 家用和類似用途的電氣自動控制器.第2-5部分:自動電燃燒器控制系統的特殊要求 | (Automatic electrical controls for household and similar use - Part 2-5 : particular requirements for automatic electrical burner control systems.) |
| NF C47-736 | 家用和類似用途的自動電控制設備.第2部分:自動電壓敏控制器件包括機械要求在內的特殊要求 | (Automatic electrical controls for household and similar use. Part 2 : particular requirements for automatic electrical pressure sensing controls including memchanical requirements.) |
| NF C47-737/A13 | 家用和類似用途的電自動控制器.第2-7部分:定時器和定時開關的特殊要求 | (Automatic electrical controls for household and similar use - Part 2-7 : particular requirements for timers and time switches.) |
| NF C47-738 | 家用和類似用途的電氣自動控制器.第2-8部分:電動水閥的特殊要求,包括機械要求 | (Automatic electrical controls for household and similar use - Part 2-8 : particular requirements for electrically operated water valves, including mechanical requirements.) |
| NF C47-739 | 家用和類似用途的電氣自動控制器.第2-9部分:熱敏控制器特殊要求 | (Automatic electrical controls for household and similar use - Part 2-9 : particular requirements for temperature sensing controls.) |
| NF C47-739/A11 | 家用和類似用途電器用自動電控制器.第2-9部分:熱敏控制器的特殊要求 | (Automatic electrical controls for household and similar use - Part 2-9 : particular requirements for temperature sensing controls.) |
| NF C47-7391 | 家用和類似用途電器的自動電控制器.第2部分:第9節:熱敏控制器的特殊要求.第1次修改 | () |
| NF C47-740/A2 | 家用和類似用途的自動電控制器.第2-10部分:電動機起動繼電器的特殊要求 | (Automatic electrical controls for household and similar use - Part 2-10 : particular requirements for motor starting relays.) |
| NF C47-743 | 家用和類似用途的電氣自動控制器.第2部分:濕度感應控制器特別要求 | (Automatic electrical controls for household and similar use. Part 2 : particular requirements for humidity sensing controls.) |
| NF C47-743/A2 | 家用及類似用途的電自動控制器.第2-13部分:濕敏控制器的特殊要求 | (Automatic electrical controls for household and similar use - Part 2-13 : particular requirements for humidity sensing controls.) |
| NF C47-746 | 家用和類似用途的自動電控制設備.第2部分:家用和類似用途浮子式水位自動電控制器的特殊要求 | (Automatic electrical controls for household and similar use. Part 2 : particular requirements for automatic electrical water level operating controls of the float type for household and similar applications.) |
| NF C47-748 | 家用及類似用途的電自動控制器.第2部分:包括機械要求的自動水和空氣流量感應控制器的特殊要求 | (Automatic electrical controls for household and similar use - Part 2 : particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements.) |
| NF C47-749 | 家用和類似用途的電氣自動控制器.第2-19部分:電氣操作油閥門的特殊要求,包括機械要求 | (Automatic electrical controls for household and similar use - Part 2-19 : particular requirements for electrically operated oil valves, including mechanical requirements.) |
| NF C48-343 | 警報系統.公共警報系統.第3部分:固定裝置和控制器 | (Alarm systems - Social alarm systems - Part 3 : local unit and controller.) |
| NF C48-438 | 報警系統.侵入檢測.事件控制器.與中央報警裝置或電話報警送話器相結合的記錄功能 | (Alarm systems - Intrusion detection - Events controller-recorder function integrated in central alarm units or telephone alarm transmitters.) |
| NF C63-112 | 低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.交流半導體電動機控制器和起動器 | (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - A.C. semiconductor motor controllers and starters.) |
| NF C63-112/A1 | 低壓開關設備和控制設備.第4-2部分:接觸器和電動機啟動器.交流電流半導體控制器和啟動器 | (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters.) |
| NF C63-113 | 低壓開關設備和控制設備.第4-3部分:接觸器和電動機起動器.非電動機負載用交流半導體控制器和接觸器 | (Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.) |
| NF C63-211M1 | 低壓工業設備.低壓開關和控制器.額定電壓為500V的交流熔斷器.補充要求.內部帶撞擊器的熔斷器.單撞擊器 | (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. FUSES FOR A. C. CIRCUITS RATED 500 V. ADDITIONAL REQUIREMENTS : STRIKER FUSES - INDEPENDENT STRIKERS.) |
| NF C74-304 | 醫用電氣設備.第2-24部分:輸液泵及其控制器的安全特殊要求 | (Medical electrical equipment Part 2-24 : particular requirements for the safety of infusion pumps and controllers.) |
| NF D36-204 | 除工藝過程用之外的燃?xì)馄骶吆陀嘘P(guān)控制器的潤滑劑 | (LUBRICANTS FOR APPLICATIONS IN APPLIANCES AND ASSOCIATED CONTROLS USING COMBUSTIBLE GASES EXCEPT THOSE DESIGNED FOR USE IN INDUSTRIAL PROCESSES. (EUROPEAN STANDARD EN 377).) |
| NF D36-305 | 燃?xì)馄骶叩亩喙δ芸刂破? | (Multifunctional controls for gas burning appliances.) |
| NF D36-391-1/A1 | 燃?xì)馊紵骱腿細庋b置用燃?xì)?空氣比率控制器.第1部分:氣動結構類型 | (Gas/air ratio controls for gas burners and gas burning appliances - Part 1 : pneumatic types.) |
| NF L58-110 | 開關.轉換開關.控制器 | (LEVER AND BUTTON OPERATED CONTROL SWITCHES. (RECH.).) |
| NF P52-701-2 | 加熱系統用控制器.第2部分:熱水加熱系統用最佳啟-?？刂圃O(shè)備 | (Controls for heating systems - Part 2 : optimum start-stop control equipment for hot water heating systems.) |
| NF P52-701-3 | 加熱系統用控制器.第3部分:電加熱系統用外部溫度補償控制設備 | (Controls for heating systems - Part 3 : outside temperature compensated control equipment for electrical heating system.) |
| NF P99-022-1 | 道路交通管理.交通信號控制器.第1部分:控制器的試驗方法 | (Road traffic control - Traffic signal controllers - Part 1 : method of test of controllers.) |
| NF P99-071-1 | 道路交通信號控制.控制器標準對話規范.第1部分:DIASER 規范(交通控制設備的標準對話) | (Road traffic signal control - Controller standard dialogue specification - Part 1 : DIASER specification (standard dialogue for traffic control equipment).) |
| NF P99-100 | 交通信號控制器.功能及操作的安全規范 | (Traffic signal controllers - Functional and operational safety specifications.) |
| NF P99-101 | 交通信號燈控制器.功能安全要求 | (Traffic signal controllers - Functional safety requirements.) |
| NF P99-105 | 道路交通管理.路口信號燈的控制器.功能特性 | (ROAD TRAFFIC CONTROL. TRAFFIC SIGNAL CONTROLLER. FUNCTIONAL SPECIFICATIONS.) |
| NF P99-110 | 道路交通管理.交通信號控制器.帶外部設備的并行數據交換.功能規范和連接性能 | (ROAD TRAFFIC CONTROL. TRAFFIC SIGNAL CONTROLLER. PARALLEL EXCHANGES OF DATA WITH EXTERNAL UNITS. FUNCTIONAL SPECIFICATIONS AND CONNECTION CHARACTERISTICS.) |
| NF Z66-800-2 | 信息處理系統.光纖排列數據接口(FDDI).第2部分:中速存取控制器(MAC)標志環 | (INFORMATION PROCESSING SYSTEMS. FIBRE DISTRIBUTED DATA INTERFACE (FDDI). PART 2 : TOKEN RING MEDIA ACCESS CONTROL (MAC). (EUROPEAN STANDARD EN 29314-2).) |
| NF Z66-802 | 信息處理系統.接口和盒式軟磁盤機之間以及它們的主機控制器 | (Information processing systems. Interface between flexible disk cartridge drives and their host controllers.) |
| NF Z83-592 | 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.一般特性(GSM 08.51) | (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. General aspects (GSM 08.51).) |
| NF Z83-593 | 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.接口原子(GSM 08.52) | (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. Interface principles (GSM 08.52).) |
| NF Z83-594 | 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.實線電路的層1結構(GSM 08.54) | (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. Layer 1 structure of physical circuits (GSM 08.54).) |
| NF Z83-595 | 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.層2規范(GSM 08.56) | (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. Layer 2 specification (GSM 08.56).) |
| NF Z83-596 | 數字蜂窩式電信系統(2).基站控制器.無線電接收機基站(BSS-BTS)接口.層3規范 | (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC-BTS) interface. Layer 3 specification (GSM 08.58, version 4.9.0).) |
| 編號 | 中文名稱 | 英文名稱 |