微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A95-701 | 粉末冶金.機械零部件自潤滑軸承用金屬與合金.規范和試驗方法的說明 | (POWDER METALLURGY.METALS AND ALLOYS FOR MECHANICAL PARTS SELF-LUBRICATING BEARINGS. INTERPRETATION OF SPECIFICATIONS AND TEST METHODS.) |
| NF A95-711 | 粉末冶金.機械部件和自潤滑軸承用的合金.鋼號一般命名規則 | (POWDER METALLURGY. ALLOYS FOR MECHANICAL PARTS AND SELF-LUBRICATING BEARINGS. RULES FOR THE CONVETIONAL DESIGNATION OF GRADES.) |
| NF A95-771-1 | 燒結金屬材料.規范.第1部分:用液體潤滑劑浸漬的軸承材料 | (Sintered metal materials. Specifications. Part 1 : materials, for bearings, impregnated with liquid lubricant.) |
| NF C27-140 | 石油產品和潤滑劑.三重磷酸脂渦輪控制流體.規范 | (Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category iso-L-tcd). Specifications.) |
| NF C27-231 | 蒸汽輪機中石油潤滑油的使用和保護指南 | (Maintenance and use guide for petroleum lubricating oils for steam turbines.) |
| NF C34-200 | 架空線路用導線.潤滑脂特性 | (Conductors for overhead lines - Characteristics of greases.) |
| NF D36-204 | 除工藝過程用之外的燃?xì)馄骶吆陀嘘P(guān)控制器的潤滑劑 | (LUBRICANTS FOR APPLICATIONS IN APPLIANCES AND ASSOCIATED CONTROLS USING COMBUSTIBLE GASES EXCEPT THOSE DESIGNED FOR USE IN INDUSTRIAL PROCESSES. (EUROPEAN STANDARD EN 377).) |
| NF E22-502 | 滑動軸承.術語,定義和分類.第3部分:潤滑 | (Plain bearings. Terms, definitions and classification. Part 3 : lubrication.) |
| NF E22-580 | 滑動軸承.耐磨材料摩擦性能試驗.第1部份：帶耐磨材料，配料和油的組件在極限潤滑條件下摩擦與磨損性能試驗 | (PLAIN BEARINGS. TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS. PART 1 : TESTING OF THE FRICTION AND WEAR BEHAVIOUR OF BEARING MATERIAL/MATING MATERIAL/OIL COMBINATIONS UNDER CONDITIONS OF BOUNDARY LUBRICATION.) |
| NF E28-011 | 傳動軸潤滑環 | (LUBRICATION RING FOR DRIVING SHAFT.) |
| NF E28-201 | 潤滑裝置.鉸鏈蓋滑脂塞 | (FLIP TOP LUBRICATOR.) |
| NF E28-202 | 潤滑裝置.轉動蓋滑脂塞 | (OIL PLUGS WITH ROTATING CAPS.) |
| NF E28-204 | 潤滑裝置.帽罩式油環 | (STAUFFER LUBRICATORS.) |
| NF E28-205 | 潤滑裝置.滑油液面計 | (OIL LEVEL.) |
| NF E37-200 | 往復式內燃機.性能.第1部分:功率、燃料消耗量和潤滑油消耗量和試驗方法說明.通用內燃機的附加要求 | (Reciprocating internal combustion engines - Performances - Part 1 : Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use) |
| NF E37-401 | 內燃機用全流量潤滑油濾器的試驗方法.第1部分:壓降/流量特性 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 1 : pressure drop/flow characteristics.) |
| NF E37-402 | 內燃機用全流量潤滑油濾器的試驗方法.第2部分:旁路濾芯部分的特性 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 2 : element by-pass component characteristics.) |
| NF E37-403 | 內燃機用全流量潤滑油濾器的試驗方法.第3部分:耐高壓降和耐高溫性 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 3 : resistance to high pressure drop and to elevated temperature.) |
| NF E37-406 | 內燃機用全流量潤滑油濾器的試驗方法.第6部分:靜態破裂壓力試驗 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 6 : static burst pressure test.) |
| NF E48-602 | 潤滑油，工業油和相關產品.L級.分類.H系列液壓系統 | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS. CLASS L. CLASSIFICATION. FAMILLE H. “HYDRAULIC SYSTEM“.) |
| NF E49-320-1 | 氣動液體動力.壓縮空氣潤滑器.第1部分:包含在供應商資料和產品標志要求的主要特性 | (Pneumatic fluid power. Compressed air lubricators. Part 1 : main characteristics to be included in supplier`s literature and product-marking requirements.) |
| NF E49-320-2 | 氣動液體動力.壓縮空氣潤滑器.第2部分:測定包含在供應商資料和產品標志要求的主要特性的試驗方法 | (Pneumatic fluid power. Compressed air lubricators. Part 2 : test methods to determine the main characteristics to be included in supplier`s literature.) |
| NF E60-202 | 機床.潤滑系統 | (Machine-tools. Lubrification systems.) |
| NF E63-076 | 壓力機配套工具.導向部件.自動潤滑油環 | (PRESS TOOLS - GUIDING ELEMENTS - SELF-OILING RINGS.) |
| NF F19-503 | 鐵路車輛.軸箱的滾軸承用潤滑脂試驗方法.潤滑脂氧化穩定性的動態試驗 | (RAILWAY ROLLING STOCK. TESTS METHOD OF GREASES FOR AXLE-BOXES TO ROLLING BEARINGS. DYNAMIC TEST FOR STABILITY TO OXYDATION OF GREASE.) |
| NF F19-504 | 鐵路車輛.滾動軸承軸箱潤滑脂試驗方法.“R2F“機潤滑穩定性試驗 | (RAILWAY ROLLING STOCK. METHOD OF TEST FOR GREASES FOR ROLLER BEARING AXLE-BOXES. GREASE SUITABILITY TEST ON THE “R2F“ MACHINE.) |
| NF F19-505 | 鐵路車輛.轉動軸箱用的潤滑油試驗方法.在試驗臺上進行振動、碰撞、旋轉的強力試驗 | (RAILWAY ROLLING STOCK. TESTING METHOD OF GREASES FOR AXLE-BOXES WITH ROLLING BEARINGS. VIBRATIONS,SHOCKS,ROTATION AND PRESSURES ENDURING TEST ON “ROPECACS“ MACHINE.) |
| NF F19-510 | 鐵路工具.軸箱.潤滑油 | (Railway applications. Axleboxes. Lubricating greases.) |
| NF F19-813 | 鐵路機車.軸箱中球面軸承用的潤滑油.質量規定 | (RAILWAY ROLLING STOCK. GREASES USED AS LUBRICANTS OF ROLLER BEARING AXLEBOXES. QUALITY REQUIREMENTS.) |
| NF L10-200 | 航空和航天.最大厚度10千分尺的金屬襯底表面用不帶有粘結材料或填料的干式氟碳潤滑劑.涂層配件的質量 | (AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED WITHOUT BINDING MATERIAL OR FILLER, MAXIMUM THICKNESS OF 10 MICROMETER ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.) |
| NF L10-201 | 航空航天工業.金屬底層最小厚度5微米的帶粘接材料和濾膜的潤滑碳氟化合物鍍膜.鍍膜部分的質量 | (AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MICROMETERS ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.) |
| NF L10-211 | 航空航天系列.干膜潤滑試驗方法.鋼樣抗腐蝕試驗(歐洲標準EN 3026) | (Aerospace series. Test method for dry film lubricants. Corrosion test on steel specimens.) |
| NF L10-212 | 航空和航天.干潤滑膜的檢驗方法.鹽霧試驗(歐洲標準EN 3027) | (Aerospace series. Test method for dry film lubricants. Salt spray test.) |
| NF L10-213 | 航空航天系列.干膜潤滑試驗方法.實粒含量測量(歐洲標準EN 3030) | (Aerospace series. Test method for dry film lubricants. Solids content.) |
| NF L10-214 | 航空航天系列.干膜潤滑試驗方法.厚度測量(歐洲標準EN 3032) | (Aerospace series. Test method for dry film lubricants. Thickness measurement.) |
| NF L10-215 | 航空航天系列.二硫化鉬干膜潤滑油.涂覆法(歐洲標準EN 2491) | (AEROSPACE SERIES. MOLYBDENUM DISULPHIDE DRY LUBRICANTS. COATING METHODS. (EUROPEAN STANDARD EN 2491).) |
| NF L22-512 | 航空螺栓和螺母.MoS2潤滑的、鍍鎘、鋼制、帶擴孔和系留墊圈的、ISO M或ISO MJ螺紋的自鎖定六角螺母.等級:11 | (Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambian) |
| NF L22-519 | 航空用螺栓和螺母.自鎖十二角頭螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1550MPa(室溫)/235℃ | (Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC.) |
| NF L22-525 | 航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、細螺距螺紋、ISO M螺紋、自鎖緊雙六角頭螺母.等級:1100MPa(室溫)/ | (Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.) |
| NF L22-541 | 航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、ISO M或ISO MJ螺紋自鎖緊六角頭螺母.等級:1100MPa(室溫)/235℃或 | () |
| NF L22-567 | 航空螺栓和螺母.鋼制、鍍鎘、MoS2潤滑的、ISO M或ISO MJ螺紋、帶擴孔的雙耳自鎖緊固定螺母.等級:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) |
| NF L22-568 | 航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat) |
| NF L22-569 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeer) |
| NF L22-570 | 航空用螺栓和螺母.60度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempera) |
| NF L22-571 | 航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 | (Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at am) |
| NF L22-572 | 航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-573 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫) | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-574 | 航空用螺栓和螺母.銳角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa () |
| NF L22-575 | 航空用螺栓和螺母.雙耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t) |
| NF L22-576 | 航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien) |
| NF L22-577 | 航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍鎘鋼螺紋.MoS2潤滑.分類:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M) |
| NF L22-587 | 航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/235 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperatu) |
| NF L22-589 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/23 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe) |
| NF L22-590 | 航空用螺栓和螺母.60度角埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/42 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-591 | 航空用螺栓和螺母.雙耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a) |
| NF L22-592 | 航空用螺栓和螺母.單耳埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (a) |
| NF L22-593 | 航空用螺栓和螺母.90度角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa () |
| NF L22-594 | 航空用螺栓和螺母.銳角埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa) |
| NF L22-595 | 航空用螺栓和螺母.雙耳扁埋頭自鎖地腳螺母.對比系列.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient) |
| NF L22-596 | 航空用螺栓和螺母.單耳浮動埋頭自鎖地腳螺母.ISO M或ISO MJ鍍銀耐腐蝕鋼螺紋.MoS2潤滑.分類:1100MPa(室溫)/ | (Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambien) |
| NF L22-750 | 潤滑軸 | (LUBRICATING PINS. (RECH.).) |
| NF L24-102 | 航空和航天系列.凸臺,細六角頭,緊配合公差柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺栓.等級:1100MPA(室溫下)/3 | (Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-103 | 航空航天系列.陽極化、MOS2潤滑的短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/315度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).) |
| NF L24-109 | 航空航天系列.陽極化MOS2潤滑鈦合金制標準六角頭、螺紋頭螺絲.等級:1100MPA(室溫)/315℃(歐洲標準EN 3308) | (AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).) |
| NF L24-134 | 航空和航天系列.100度減徑沉頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺絲.等級:1100MP | () |
| NF L24-136 | 航空和航天系列.陽極化MOS2潤滑鈦制100度標準埋頭偏移十字槽、螺紋頭螺絲.等級:1100MPA(室溫下)/315℃(歐洲 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3306).) |
| NF L24-182 | 航空和航天.用MoS2潤滑,陽極化,鈦合金制,短螺紋,帶翼型十字槽的平頭螺釘.等級:1100MPa(室溫下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).) |
| NF L24-186 | 航空和航天系列.平頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).) |
| NF L24-188 | 航空和航天系列.平頭,偏移十字槽,螺紋到頂部,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).) |
| NF L24-228 | 航空和航天系列.用MoS2潤滑陽極化鈦合金制短螺紋緊公差標準柄標準雙六角頭螺栓.分類:1100MPa(環境溫度)/315 | (AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).) |
| NF L24-469 | 航空和航天系列.合金鋼鍍鎘MOS2潤滑深锪孔雙耳鎖緊浮動地腳螺母.等級:900MPa/235℃(歐洲標準EN 2264) | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2264).) |
| NF L24-472 | 航空和航天系列.帶埋頭孔的固定錨式單耳自鎖鍍鎘合金鋼MOS2潤滑螺母.分類.1100MPa(環境溫度)/235℃ | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).) |
| NF L24-507 | 航空和航天.自鎖鍍隔合金鋼MOS*2制坡面墊平用潤滑六角螺母.等級900MPa/235℃ | (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2647).) |
| NF L29-811 | 軸向連接潤滑器 | (Lubricating nipples for shafts.) |
| NF L29-812 | 徑向連接潤滑器 | (Lubricating nipples for bearings.) |
| NF L31-550 | 航空航天系列.帶自調潤滑襯套的耐蝕鋼關節軸承.技術規范 | (Aerospace series. Bearings spherical plain in corrosion resisting steel with self lubricating liners. Technical specification.) |
| NF L31-553 | 航空和航天系列.自潤滑油封防腐球頭螺栓和寬內墊圈.尺寸和負載 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads.) |
| NF L31-554 | 航空和航天系列.輕系列自潤滑油封鋼制耐腐蝕球頭螺栓的鋼球頭螺栓 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, light series. Dimensions and loads.) |
| NF L31-555 | 航空和航天系列.標準系列自潤滑油封鋼制耐腐蝕球頭螺栓.尺寸和負載 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, normal series. Dimensions and loads.) |
| NF L31-556 | 航空和航天系列.室溫條件下高負荷、窄系列、帶自動潤滑層的耐蝕鋼球面軸承.尺寸和負載 | (Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads.) |
| NF L31-557 | 航空和航天系列.室溫條件下高負荷、寬系列、帶自動潤滑層的耐蝕鋼球面軸承.尺寸和負載 | (Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads.) |
| NF L31-558 | 航空和航天系列.室溫條件下高負荷、輕系列、帶自動潤滑層的耐蝕鋼球面軸承.尺寸和負載 | (Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions andd loads.) |
| NF L31-601 | 航空和航天系列.自動潤滑墊圈.技術規范 | (Aerospace series. Bushes with self-lubricating liner. Technical specification.) |
| NF L31-602 | 航空和航天系列.鋁合金圓環.自潤滑油封.尺寸和負載 | (AEROSPACE SERIES. BUSHES,PLAIN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2285).) |
| NF L31-603 | 航空和航天系列.鋁合金凸環.自潤滑油封.尺寸和負載 | (AEROSPACE SERIES. BUSHES,FLANGED ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2286).) |
| NF L31-604 | 航空和航天系列.鋼質防腐圓環.自潤滑油封.尺寸和負載 | (AEROSPACE SERIES. BUSHES,PLAIN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2287).) |
| NF L31-605 | 航空和航天系列.鋼制防腐凸環.自潤滑油封.尺寸和負載 | (Aerospace series. Bushes, flanged corrosion resisting steel with self-lubricating liner. Dimensions and loads.) |
| NF L35-170 | 有自潤滑裝置的球形接頭.無縱向槽的長螺紋桿.尺寸和負荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK WITHOUT KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-171 | 有自潤滑裝置的球形接頭有縱向槽的長螺紋桿.尺寸和負荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK AND KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-172 | 航空和航天系列.帶螺紋桿和自潤滑油封球頭螺栓的可調底座.尺寸和負載.(歐洲標準 EN 2498) | (AEROSPACE SERIES. ROD ENDS,AJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AN THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2498).) |
| NF L36-222 | 航空和航天系列.帶自潤滑油封和螺紋安裝桿的球形可調接頭:螺紋直徑1.5.尺寸和負荷.(歐洲標準EN 2790) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK WITH ENGAGEMENT : 1,5 THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2790).) |
| NF L36-223 | 航空和航天系列.帶自潤滑油封和螺紋安裝桿的單包邊可調接頭:螺紋直徑1.5.尺寸和負荷.(歐洲標準EN 2791) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SINGLE FORK AND THREADED SHANK WITH ENGAGEMENT : 1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2791).) |
| NF L36-224 | 航空和航天系列.帶自潤滑油封和螺紋安裝桿的雙包邊可調接頭.螺紋直徑1.5.尺寸和負荷.(歐洲標準EN 2792) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,DOUBLE FORK AND THREADED SHANK WITH ENGAGEMENT :1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2792).) |
| NF L36-225 | 航空和航天.帶關節軸承和自潤滑涂層的吊環端頭.交貨技術條件 | (AEROSPACE SERIES. ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2068).) |
| NF L44-550 | 潤滑油壓力注入接頭 | (Pressure re-oiling connection.) |
| NF M07-019 | 石油產品和潤滑材料.閃點的測定.彭斯克--馬丁(Peucky-Martens)閉杯法 | (Retroleum products and lubricants. Determination of flash point. Pensky-martens closed cup method.) |
| NF M07-071-1 | 柴油燃料.使用高頻往復裝置對潤滑性的評價.第1部分:試驗方法 | (Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1 : test method.) |
| NF M07-103 | 柴油燃料乳劑中的水.使用高頻往復裝置對潤滑性的評價 | (Water in diesel fuel emulsions - Assessment of lubricity using the high-frequency reciprocating rib (HFRR).) |
| NF M82-661 | 采礦設備.固體潤滑劑.使用說明 | (MINING EQUIPMENT. SOLID LUBRICANTS. RECOMMENDATIONS FOR USE.) |
| NF M82-662 | 采礦設備.固體潤滑劑.一般特性 | (MINING EQUIPMENT. SOLID LUBRICANTS. GENERAL PROPERTIES.) |
| NF M88-950 | 石油工業.潤滑油壓射器.尺寸 | (PETROLEUM INDUSTRIE. GREASE CATRIGES. DIMENSIONS.) |
| NF R16-505 | 內燃機.潤滑油用自旋式濾油器.尺寸 | (Internal combustion engines. Spin-on filters for lubricating oil. Dimensions.) |
| NF R16-521 | 道路車輛.球面頭錐形短螺紋潤滑器.尺寸特性 | (Road vehicles. Lubricating spherical heads with short conical screw threads. Dimensional characteristics.) |
| NF S97-034 | 添加潤滑劑和醫用或非醫用的制劑,放在與避孕套接觸的部位.相容性.規范和試驗方法 | (ADDITIONAL LUBRICANTS AND MEDICINAL OR NON-MEDICINAL PREPARATIONS INTENDED OR LIKELY TO BE PLACED IN CONTACT WITH MALE CONDOMS. COMPATIBILITY. SPECIFICATIONS AND TEST METHODS.) |
| NF T60-102 | 潤滑脂.滴點測定 | (Lubricating greases. Determination of the dropping point.) |
| NF T60-103 | 石油產品.潤滑脂和燃燒油在密封容器中閃點的測定 | (PETROLEUM PRODUCTS. CLOSED CUP FLASH POINT OF LUBRICANTS AND FUEL OILS.) |
| NF T60-106 | 液態石油產品.未用和使用過的潤滑油中雜質、磨損金屬和添加元素的測定.感應耦合等離子體原子發射光譜法(ICP | (Liquid petroleum products - Determination of additive elements, wear metals and contaminants in unused and used lubricating oils - Method by inductively coupled plasma atomic emission spectroscopy (IC) |
| NF T60-109 | 石油產品.爆炸法測定石油產品和潤滑脂中硫的含量 | (PETROLEUM PRODUCTS. DETERMINATION OF SULPHUR IN PETROLEUM PRODUCTS AND LUBRICANTS BY THE BOMB METHOD.) |
| NF T60-111 | 石油基潤滑油.老化特性.用康拉孫(法)測定氧化后殘?zhí)嫉淖兓? | (Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation.) |
| NF T60-112 | 石油產品和潤滑劑.酸值和堿值的測定.彩色指示劑滴定法 | (Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method.) |
| NF T60-129 | 石油產品.潤滑油發泡特性的測定 | (Petroleum products. Determination of foaming characteristics of lubricating oils.) |
| NF T60-133 | 石油產品.潤滑脂的游離酸度和堿度 | (PETROLEUM PRODUCTS. ACIDITY AND ALKALINITY OF LUBRICANT GREASES.) |
| NF T60-135 | 石油產品和潤滑劑.潤滑油的防銹特性的測定 | (Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases.) |
| NF T60-139 | 石油產品.潤滑脂的表視粘度 | (INDUSTRIAL OILS AND GREASES. APPARENT VISCOSITY OF LUBRICATING GREASE.) |
| NF T60-140 | 石油產品.用四分之一或二分之一標度錐測定潤滑脂的針入度 | (CONE PENETRATION OF LUBRICATION GREASE USING ONE-QUARTER OR ONE-HALF SCALE CONE EQUIPMENT.) |
| NF T60-141 | 工業液體潤滑劑.ISO粘度分類 | (Industrial liquid lubricants. ISO viscosity classification.) |
| NF T60-144 | 石油產品.潤滑脂中硫灰分的測定 | (DETERMINATION OF SULFATED ASH FROM GREASES.) |
| NF T60-157 | 石油產品.潤滑油中不溶物質的含量 | (PETROLEUM PRODUCTS. INSOLUBLES CONTENT OF LUBRICATING OILS.) |
| NF T60-162 | 潤滑劑、工油和類似產品(L類).分類.O部分: 綜合 | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 0 : GENERAL.) |
| NF T60-163 | 潤滑劑.工業油和類似產品(L類).分類.第1部分: A類(潤滑損耗) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 1 : FAMILY A (TOTAL LOSS SYSTEM).) |
| NF T60-164 | 潤滑劑、工業油和類似產品(L類).分類.第2部分: F類(主軸軸承.軸承和亮合離合器 (LUBRICANTS,INDUSTRIAL OIL | (SPINDLE BEARINGS AND ASSOCIATED CLUTCHES).) |
| NF T60-171 | 石油產品.低溫下潤滑脂錐面的錐入滲透度 | (PETROLEUM PRODUCTS. DETERMINATION OF CONE PENETRATION OF GREASES UNDER LOW TEMPERATURE.) |
| NF T60-189 | 潤滑脂.車輪軸承脂的滲漏趨勢 | (LUBRICATING GREASES. LEAKAGE TENDENCIES OF AUTOMOTIVE WHEEL BEARING GREASES.) |
| NF T60-191 | 石油產品和潤滑脂.潤滑脂存儲時的脫油現象.壓力下的靜態條件 | (Petroleum products and lubricating greases. Oil separation on storage of grease. Static conditions under pressure.) |
| NF T60-198 | 潤滑油.基本生物降解性的評定.紅外光譜法 | (LUBRICANTS. EVALUATION OF PRIMARY BIODEGRADABILITY. METHOD BY INFRARED SPECTROSCOPY.) |
| NF T60-199 | 潤滑脂.潤滑脂耐磨擦腐蝕壓痕的能力 | (LUBRICATING GREASES. ABILITY OF LUBRICATING GREASES TO RESIST TO FALSE BRINELLING.) |
| NF T60-215 | 動物脂肪和植物脂肪.潤滑工業油酸氧化試驗(MACKEY試驗) | (ANIMAL AND VEGETABLE FATS. OXIDIZABILITY TEST OF TECHNICAL OLEIC ACIDS FOR OILING (MACKEY TEST).) |
| NF T60-309 | 潤滑劑、工業油和類似產品(L類).分類.O部分: 綜合 | (SOAPS. DETERMINATION OF UNSAPONIFIABLE AND UNSAPONIFIED MATTER.) |
| NF T60-500 | 石油產品和潤滑劑.分類方法.分類說明 | (Petroleum products and lubricants. Method of classification. Definition of classes.) |
| NF T60-501 | 潤滑劑、工業潤滑油及其產品(L類).分類.第3A部分:D系列(壓縮機用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 3A : FAMILY D (COMPRESSORS).) |
| NF T60-502 | 潤滑劑、工業潤滑油及其產品(L類).分類,第3B部分:D系列(氣體和制冷壓縮機用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 3B : FAMILY D (GAS AND REFRIGERATION COMPRESSORS).) |
| NF T60-503 | 潤滑劑、工業潤滑油及相關產品(L級).分類.第5部分:T族(渦輪用) | (Lubricants, industrial oils and related products (class L). Classification. Part 5 : family T (turbines).) |
| NF T60-504 | 潤滑劑、工業潤滑油及其產品(L類).分類.第7部分:M系列(金屬加工用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 7 : FAMILLY M (METALWORKING).) |
| NF T60-505 | 潤滑劑、工業用油及相關產品(L類).分類.第8部分:R系列(暫時性防腐) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 8 : FAMILY R (TEMPORARY PROTECTION AGAINST CORROSION).) |
| NF T60-506 | 潤滑劑、工業用油及相關產品(L類).分類.第9部分:X系列(潤滑脂) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 9 : FAMILY X (GREASES).) |
| NF T60-507 | 潤滑劑、工業用油及相關產品(L類).分類.第6部分:C系列(齒輪傳動) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 6 : FAMILY C (GEARS).) |
| NF T60-508 | 潤滑劑、工業潤滑油和類似產品(L級).分類.第10部分:Y類(雜頂) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 10 : FAMILY Y (MISCELLANEOUS).) |
| NF T60-509 | 潤滑劑、工業潤滑油和類似產品(L級).分類.第11部分:P類(風動工具) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 11 : FAMILY P (PNEUMATIC TOOLS).) |
| NF T60-510 | 潤滑劑、工業油類和有關產品(L級).分類.第12部分:Q類(導熱液體) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 12 : FAMILY Q (HEAT TRANSFERT FLUIDS).) |
| NF T60-511 | 潤滑劑、工業潤滑油和類似產品(L級).第13部分:G類(滑軌) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 13 : FAMILY G (SLIDEWAYS).) |
| NF T60-512 | 潤滑油、工業用油和類似產品.(L級).分類.第14部分.U類(熱處理) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 14 : FAMILY U (HEAT TREATMENT).) |
| NF T60-513 | 潤滑劑、工業潤滑油和相關產品(L類).分類.第4部分:H組(液壓系統) | (Lubricants, industrial oils and related products (class L) - Classification - Part 4 : family H (hydraulic systems).) |
| NF T60-514 | 潤滑劑、工業用油和有關產品(L類).分類.第15部分:E系列(內燃機油) | (Lubricants, industrial oils and related products (class L) - Classification - Part 15 : family E (Internal combustion engine oils).) |
| NF T60-521 | 石油產品和潤滑劑.渦輪用石油潤滑油(ISO-L-TSA和ISO-L-TGA).規范 | (PETROLEUM PRODUCTS AND LUBRICANTS. PETROLEUM LUBRICATING OILS FOR TURBINES (CATEGORIES ISO-L-TSA AND ISO-L-TGA). SPECIFICATIONS.) |
| NF T60-524 | 潤滑油、工業潤滑油和相關產品(L級).E族(內燃機潤滑油).兩沖程周期汽油機用油規范(EGB、EGC、EGD類) | (Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD).) |
| NF T60-525 | 潤滑油、工業用油和相關產品(L級).H族(液壓系統).目錄HH、HL、HN、HR、HV和HG規范 | (Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG.) |
| NF T60-526 | 潤滑油、工業油及有關產品(L級).H系列(液壓系統).HFAE、HFAS、HFB、HFC、HFDR和HFDU類別規范 | (Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU.) |
| NF T60-602 | 工業齒輪用耐特高壓潤滑劑.人工老化氧化穩定性的評定 | (EXTREME PRESSURE LUBRICANTS FOR INDUSTRIAL GEARS. EVALUATION OF OXIDATION STABILITY BY ARTIFICIAL AGEING.) |
| NF T60-605 | 石油產品和潤滑劑.未用的潤滑油基上的多環芳香劑的測定.二甲亞礬萃取反應指數法 | (PETROLEUM PRODUCTS AND LUBRICANTS. DETERMINATION OF POLYCYCLIC AROMATICS IN UNUSED LUBRICATING BASE OILS. DIMETHYL SULPHOXIDE EXTRACTION REFRACTIVE INDEX METHOD.) |
| NF T60-607 | 石油產品和潤滑油.凈餾分油DMSO抽提物紫外吸收指數的測定 | (PETROLEUM PRODUCTS AND LUBRICANTS. DETERMINATION OF THE UV ABSORBANCE INDEX OF DMSO EXTRACT OF NEAT CUTTING OILS.) |
| NF T60-608 | 石油產品和潤滑劑.高負荷下潤滑脂的攻絲滾柱軸承潤滑性能 | (Petroleum products and lubricants - Tappered roller bearing lubricating ability of a grease under high load.) |
| NF T60-609 | 石油產品和潤滑劑.酸值的測定.無水分電勢滴定法 | (PETROLEUM PRODUCTS AND LUBRICANTS. DETERMINATION OF ACID NUMBER. NON-AQUEOUS POTENTIOMETRIC TITRATION METHOD. (EUROPEAN STANDARD EN 12634).) |
| NF T60-612-2 | 石油產品.潤滑油可過濾性測定.第2部分:干油程序 | (Petroleum products - Determination of the filterability of lubricating oils - Part 2 : procedure for dry oils.) |
| NF T60-613 | 石油產品和潤滑油.金屬作業用水流質體.評估生物耐性 | (Petroleum products and lubricants - Aqueous fluids for metal working - Evaluation of the biological resistance.) |
| NF T77-104 | 工業基硅.膠劑,潤滑脂和非流體凝膠.錐入度的測定.稠度法 | (BASIC SILICONES FOR INDUSTRIAL USE. PASTES,GREASES AND NON FLUID GELS. DETERMINATION OF CONE PENETRATION. CONSISTOMETRY.) |
| 編號 | 中文名稱 | 英文名稱 |