微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A49-751 | 地下熱水管網的預隔熱粘結管道系統.鋼制供水管配件、聚氨基甲酸乙酯熱絕緣材料以及高密度聚乙烯外殼 | (Preinsulated bonded pipe systems for underground hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
| NF C18-404 | 帶電作業用的絕緣材料袖套 | (Sleeves of insulating material for live working.) |
| NF C18-415 | 帶電作業用的絕緣材料手套和連指手套規范 | (Specification for gloves and mitts of insulating material for live working.) |
| NF C18-478 | 帶電作業.絕緣材料作成的梯子 | (Live working - Ladders of insulating material.) |
| NF C18-479 | 帶電作業.絕緣材料用柔性導線外殼(軟管) | (Live working - Flexible conductor covers (line hoses) of insulating material.) |
| NF C18-479/A1 | 帶電作業.絕緣材料的柔性導體封蓋物 | (Live working - Flexible conductor covers (line hoses) of insulating material.) |
| NF C26-011-1 | 絕緣材料.電工用工業剛性模制矩形和六邊形橫截面的熱固性樹脂基層壓管材和棒材.第1部分:定義、名稱與符號和 | (Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1 : definitions, des) |
| NF C26-111 | 云母基絕緣材料規范.第1部分:定義和一般要求 | (Specification for insulating materials based on mica - Part 1 : definitions and general requirements.) |
| NF C26-112 | 云母基絕緣材料規范.第2部分:試驗方法 | (Specification for insuslating materials based on mica. Part 2 : methods of test.) |
| NF C26-113-1 | 云母基絕緣材料規范.第3部分:單項材料規范.第1活頁:換向器隔板和材料 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 1 : commutator separators and materials.) |
| NF C26-113-2 | 云母基絕緣材料規范.第3部分:單一材料規范.第2活頁:云母紙 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 2 : mica paper.) |
| NF C26-113-3 | 云母基絕緣材料規范.第3部分:單項材料規范.第3活頁:加熱設備用硬質云母材料 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 3 : specification for rigid mica materials for heating equipment.) |
| NF C26-113-4 | 云母基絕緣材料規范.第3部分:單項材料規范.第4活頁:用B級環氧樹脂粘合劑粘結的聚酯薄膜襯底云母紙 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 4 : polyester film-backed mica paper with a B-stage epoxy resin binder.) |
| NF C26-113-5 | 云母基絕緣材料規范.第3部分:單項材料規范.第5活頁:用環氧樹脂粘合劑粘結的待浸漬處理的玻璃纖維織物襯底云 | (Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).) |
| NF C26-113-6 | 云母基絕緣材料規范.第3部分:單項材料規范.第6活頁:用B級環氧樹脂粘合劑粘結的玻璃纖維織物襯底云母紙 | (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.) |
| NF C26-113-7 | 云母基絕緣材料規范.第3部分:單項材料規范.第7活頁:單導體膠帶用帶環氧樹脂粘結劑的聚酯薄膜云母紙 | (Insulating materials based on mica. Part 3 : specification of individual materials. Sheet 7 : polyester film mica paper with an expoxy resin binder for single conductor taping.) |
| NF C26-113-8 | 云母基絕緣材料規范.第3部分:單項材料規范.第8活頁:抗燃安全電纜用云母紙帶 | (Insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 8 : mica paper tapes for flame-resistant security cables.) |
| NF C26-113-9 | 云母基絕緣材料規范.第3部分:單項材料規范.第9活頁:單項材料規范.第9活頁:壓制膠合云母板 | (Insulating materials based on mica. Part 3 : specification for individual materials. Sheet 9 : moulding micanite.) |
| NF C26-121 | 固體絕緣材料.云母基制品.選型件.規則 | (SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS - MOULDED PARTS. REQUIREMENTS.) |
| NF C26-122 | 固體絕緣材料.成卷云母基制品.規范 | (SOLID INSULATING MATERIALS. MICACEOUS PRODUCTS IN ROLLS. SPECIFICATIONS.) |
| NF C26-125 | 固體絕緣材料.軟云母基制品.規范 | (SOLID INSULATING MATERIALS. FLEXIBLE MICA PRODUCTS. SPECIFICATION.) |
| NF C26-170 | 固體絕緣材料.電氣用剛紙.一般要求 | (Solid insulating materials. Vulcanized fibre for electrical purposes. General requirements.) |
| NF C26-200 | 絕緣材料試驗方法.電氣絕緣材料在試驗前和試驗中應遵循的條件 | (Methods of testing insulating materials. Standard conditions for usterials.) |
| NF C26-202 | 絕緣材料.老化試驗數據的統計分析 | (Insulating materials statistical analysis of ageing test data.) |
| NF C26-203 | 試驗方法.用繞管法評價軟片型絕緣材料耐熱性的試驗方法 | (Test method for evaluating thermal endurance of flexible sheet materials using the wrappel tube method.) |
| NF C26-212 | 測定暴露于電熱金屬線源時固體電絕緣材料可燃性的試驗方法. | (Methods of test for the determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources.) |
| NF C26-214 | 用差式掃描量熱法測定電絕緣材料溶化和結晶的熱量和溫度 | (Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry.) |
| NF C26-215 | 絕緣材料的試驗方法.固體電絕緣材料體電阻率和表面電阻率的試驗方法 | (Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.) |
| NF C26-218 | 絕緣材料的試驗方法. 高溫絕緣材料的絕緣電阻率和橫向電阻率的試驗方法 | (Methods of testing insulating materials. Method of test for electrial resistance and resistivity of insulating materials at elevated temperatures.) |
| NF C26-220 | 絕緣材料的試驗方法.潮濕條件下固體絕緣材料的電阻指數和滲透特性的測定方法 | (Method of testing insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions.) |
| NF C26-220 | 固體絕緣材料的比較起痕指數和耐泄痕指數的測定方法 | (Method for the determination of the proof and the comparative tracking indices of solid insulating materials.) |
| NF C26-221 | 電絕緣材料的測試方法.評估惡劣的環境條件下使用的電絕緣材料的擊穿和腐蝕電阻 | (Methods of testing isulating materials. Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions.) |
| NF C26-222 | 電氣絕緣材料.抗電弧和侵蝕性的評定方法.常規輪浸蝕試驗 | (Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test.) |
| NF C26-226 | 絕緣材料介電強度.試驗方法.第1部分:功率頻率試驗 | (Electrical strength of insulating materials. Test methods. Part 1 : tests at power frequencies.) |
| NF C26-228 | 絕緣材料的介電強度.試驗方法.第3部分:1,2/50 微秒脈沖試驗的補充要求 | (Electrical strengh of insulating materials - Test methods - Part 3 : additional requirements for 1,2/50 micro second impulse tests.) |
| NF C26-230 | 絕緣材料的試驗方法.測定工頻、音頻和無線電頻率用電絕緣材料介電常數和離散因子的推薦方法 | (Methods of testing insulating materials. Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating material at power, audio and radio freq.) |
| NF C26-231 | 絕緣材料的試驗方法.測定高于300MHz 的絕緣材料介電特性的推薦方法 | (Methods of testing insulating materials.recommended methods for thedetermination of the dielectric properties of insulating material at frequencies above 300 MHz.) |
| NF C26-231/AM1 | 絕緣材料的試驗方法.絕緣材料在頻率為300MHz以上時的介電特性的推薦測定方法 | (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.) |
| NF C26-231M1 | 絕緣材料的試驗方法.絕緣材料在頻率為300MH2以上時的介電特性的推薦測定方法 | (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.) |
| NF C26-235-1 | 電絕緣材料的液壓穩定性的試驗方法.第1部分:塑料薄膜 | (Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.) |
| NF C26-235-2 | 電氣絕緣材料.液壓穩定性試驗方法.第2部分:模制熱固 | (Electrical insulating materials. Methods of test for the hydrolytic stability. Part 2 : moulded thermosets.) |
| NF C26-240 | 測定由表面放電擊穿絕緣材料的相對電阻的推薦性測定方法 | (Recommanded test methods for determining the relative resistance of insulating materials to breakdown by surface discharges.) |
| NF C26-251 | 絕緣材料的試驗方法.電絕緣材料用塑料薄膜和塑料紙摩擦系數的測定方法 | (Methods of testing insulating materials. Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation.) |
| NF C26-260 | 絕緣材料的試驗方法.有絕緣材料時測定電解腐蝕性的試驗方法 | (Methods of testings insulating materials test methods for determining electrolytic corrosion with insulating materials.) |
| NF C26-270 | 絕緣材料的試驗方法.新的和老化的電工用紙中等聚合粘度的測定 | (Mesurement of the average viscosimetric degree of polymerization ofnew and aged electrical papers.) |
| NF C26-280 | 絕緣材料的試驗方法.用液體提取法測定絕緣材料中離子雜質的試驗方法 | (Methods of testing insulating materials. Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids.) |
| NF C26-287 | 干燥,固體絕緣材料.云母基絕緣材料.一般規定 | (Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges.) |
| NF C26-290-1 | 電器絕緣材料.確定電離輻射的影響.第1部分:輻射感應和劑量測定 | (Electrical insulating materials. Determination of the effects of ionizing radiation. Part 1 : radiation interaction and dosimetry.) |
| NF C26-290-2 | 測定絕緣材料電離輻射效應的指南.第2部分:輻射和試驗方法 | (Guide for determining the effects of ionizing radiation on insulating materials. Part 2 : procedures for irradiation and test.) |
| NF C26-290-4 | 對絕緣材料的離子輻射力的測定指南.第4部分:在輻射環境中設施的分類體系 | (Guide for determining the effects of ionizing radiation on insulating materials. Part 4 : classification system for service in radiation environnements.) |
| NF C26-290-5 | 電絕緣材料.確定電離輻射的影響.第5部分:在使用過程中的老化評定方法 | (Electrical insulation materials - Determinination of the effects of ionising - radiation - Part 5 : procedures for assessment of ageing in service.) |
| NF C26-301 | 電絕緣材料.耐熱性能.第1部分:老化過程和試驗結果評定 | (Electrical insulating materials - Properties of thermal endurance - Part 1 : ageing procedures and evaluation of test results.) |
| NF C26-302 | 電絕緣材料熱穩定性的測定.試驗準則選擇 | (Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria.) |
| NF C26-303 | 電絕緣材料.耐熱性能.第3部分:耐熱性計算說明 | (Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics.) |
| NF C26-304 | 電絕緣材料耐熱性能測定.老化爐.第1節.單室爐 | (Determination of thermal endurance properties of electrical insulating materials. Ageing ovens. Section 1 : single-chamber ovens.) |
| NF C26-304-2 | 電絕緣材料.耐熱性能.第4-2部分:老化爐.300℃以下使用的精確爐 | (Electrical insulating materials - Thermal endurance properties - Part 4-2 : ageing ovens - Precision ovens for use up to 300 oC.) |
| NF C26-304-3 | 電絕緣材料.耐熱性.第4-3部分:老化烘箱.多室烘箱 | (Electrical insulating materials - Thermal endurance properties - Part 4-3 : ageing ovens - Multi-chamber ovens.) |
| NF C26-305 | 電絕緣材料.耐熱特性.第5部分:絕緣材料相對耐熱指數(RTE)的測定 | (Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material.) |
| NF C26-306 | 電絕緣材料耐熱性試驗的分析試驗方法的應用指南 | (Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials.) |
| NF C26-401-1 | 陶瓷和玻璃絕緣材料.第1部分:定義和分類 | (Ceramic and glass insulating materials. Part 1 : definitions and classifications.) |
| NF C26-401-2 | 陶瓷和玻璃絕緣材料.第2部分:試驗方法 | (Ceramic and glass insulating materials - Part 2 : methods of test.) |
| NF C26-401-3 | 陶瓷和玻璃絕緣材料.第3部分:單個材料的規范 | (Ceramic and glass-insulating materials. Part 3 : specifications for individual materials.) |
| NF C27-240 | 浸漬絕緣材料.關于電氣設備制造試驗的溶解氣體的分析應用(歐洲標準 EN 61 181) | (Impregnated insulating materials. Application of dissolved gas analysis (dga) to factory tests on electrical equipment.) |
| NF C32-027/A2 | 電纜和光纜用絕緣材料和護套材料.通用試驗方法.第1-4部分:一般應用.低溫試驗 | (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4 : general application - Tests at low temperature.) |
| NF C32-028/A1 | 電纜和光纜用絕緣材料和護套材料.通用試驗方法.第2-1部分:專用于彈性化合物的方法.耐臭氧性、熱固和礦物油 | (Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1 : methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tes) |
| NF E29-033 | 地下熱水管道網絡的隔熱管道系統.鋼制供水管道聚氨基甲酸乙酯熱絕緣材料及高密度聚乙烯外殼的連接組件 | (Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
| NF E29-480 | 地下熱水管網的預隔熱管道系統.鋼制供水管道、聚氨基甲酸乙酯熱絕緣材料及高密度聚乙烯外殼的鋼閥門組件(歐 | (Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.) |
| NF P75-101 | 建筑物絕緣材料.定義 | (THERMAL INSULATION FOR BUILDING PURPOSES. DEFINITION.) |
| XP P 30-313 | 屋頂. 固定件.組件抗性的測定.測定絕緣材料或框架密封包覆固定拉力負荷的測試方法 | (ROOFING. FASTENERS. DETERMINATION OF THE CHARACTERISTIC RESISTANCE OF THE ASSEMBLY. TEST METHOD TO DETERMINE THE PULL-OUT LOAD OF FIXINGS OUT OF INSULATING MATERIAL OR SEALING COATING FROM THE FRAME.) |
| 編號 | 中文名稱 | 英文名稱 |