微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A51-127 | 銅和銅合金.醫用氣體或真空用的無縫圓銅管 | (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.) |
| NF A51-310 | 銅和銅合金.電子管、半導體器件和真空設施用高傳導性的銅制產品 | (Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications.) |
| NF B40-339 | 密實成型耐火制品的試驗方法.第17部分:真空水銀法測定粒狀材料的松密度 | (METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 17 : DETERMINATION OF BULK DENSITY OF GRANULAR MATERIALS BY THE MERCURY METHOD WITH VACUUM. (EUROPEAN STANDARD EN 993-17).) |
| NF B40-340 | 密實成型耐火產品試驗方法.第18部分:利用真空滲水法測定顆粒材料的體密度 | (Methods of test for dense shaped refractory products - Part 18 : determination of bulk density of granular materials by the water method with vacuum.) |
| NF C73-161 | 家用真空清潔器.性能的測量方法 | (Vaccum cleaners for household use - Methods of measuring the performance.) |
| NF C73-161/A1 | 家用真空吸塵器性能的測量方法 | (Vaccum cleaners for household use - Methods of measuring the performance.) |
| NF C73-802 | 家用和類似用途電器的安全.第2部分:真空吸塵器和吸水式吸塵器的特殊要求 | (Safety of household and similar electrical appliances - Part 2 : particular requirements for vacuum cleaners and water suction cleaning appliances.) |
| NF C73-802/A1 | 家用和類似用途電器的安全.第2-2部分:真空吸塵器和吸水清潔器具特殊要求 | (Safety of household and similar electrical appliances - Part 2-2 : particular requirements for vacuum cleaners and water suction cleaning appliances.) |
| NF C73-869 | 家用和類似電器的安全.第2部分:工業和商業用濕、干真空吸塵器包括電刷的特殊要求 | (Safety of household and similar electrical appliances. Part 2 : particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use.) |
| NF D21-001 | 接觸食品的材料和物品.家用保溫容器.第1部分:真空器皿、保溫瓶和保溫水壺規范 | (Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 1 : specification for vacuum ware, insulated flasks and jugs.) |
| NF E04-201 | 工業流程控制.圖形符號.第201部分:真空技術. | (Industrial processes. Symbolic representation. Vacuum technology.) |
| NF E29-720 | 真空技術.高真空連接件.基本原理 | (VACUUM TECHNOLOGY. HIGH VACUUM CONNECTIONS. BASIC PRINCIPLES) |
| NF E29-721 | 真空技術.高真空用法蘭盤.尺寸 | (VACUUM TECHNOLOGY. HIGH VACUUM FLANGES. DIMENSIONS) |
| NF E29-722 | 真空技術.高真空管頸用旋轉法蘭盤.裝配環形件.尺寸 | (VACUUM TECHNOLOGY. HIGH VACUUM ROTATABLE FLANGES FOR USE WITH COLLARS. COLLAR RETAINING RINGS. DIMENSIONS) |
| NF E29-723 | 真空技術.高真空管頸.尺寸 | (VACUUM TECHNOLOGY HIGH VACUUM COLLARS. DIMENSIONS) |
| NF E29-724 | 真空技術.高真空帶卡箍的快速連接管.尺寸 | (VACUUM TECHNOLOGY. CLAMPED TYPE QUICK RELEASE COUPLINGS FOR HIGH VACUUM. DIMENSIONS) |
| NF E29-726 | 真空技術.真空管道用鋼管.尺寸 | (VACUUM TECHNOLOGY. STEEL TUBES FOR VACUUM PIPES. DIMENSIONS) |
| NF E51-290 | 壓縮機和真空泵.安全要求.第1部分:壓縮機 | (Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.) |
| NF E51-291 | 壓縮機和真空泵.安全要求.第2部分:真空泵 | (Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.) |
| NF E86-502-1 | 低溫車輛.大型可運輸真空絕緣車輛.第1部分:基本要求 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1 : fundamental requirements.) |
| NF E86-502-2 | 低溫容器.大體積可運輸?shù)恼婵战^緣容器.第2部分:設計、裝配、檢驗和試驗 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.) |
| NF E86-502-3 | 冷凍車輛.大型可運輸真空絕緣車輛.第3部分:運行要求 | (Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.) |
| NF E86-504-1 | 冷凝容器.靜置真空絕緣壓力容器.第1部分:基本原理要求 | (Cryogenic vessels - Static vacuum insulated vessels - Part 1 : fundamental requirements.) |
| NF E86-504-2 | 低溫容器.靜壓真空絕熱容器.第2部分:設計、制造、檢驗和測試 | (Cryogenic vessels - Static vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing.) |
| NF E86-504-3 | 低溫容器.靜態真空絕緣容器.第3部分:操作要求 | (Cryogenic vessels - Static vacuum insulated vessels - Part 3 : operational requirements.) |
| NF E86-601-2 | 檢漏系統.第2部分:壓力和真空系統 | (Leak detection systems - Part 2 : pressure and vacuum systems.) |
| NF H35-105-1 | 制瓶工業.寬口玻璃容器.吸真空突出部的精整.第1部分:38mm標準直徑 | (Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 1 : 38 mm nominal diameter.) |
| NF H35-105-2 | 制瓶工業.寬口玻璃容器.吸真空突出部的精整.第2部分:43mm和48mm標準直徑 | (Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 2 : 43 mm and 48 mm nominal diameters.) |
| NF H35-105-3 | 制瓶工業.寬口玻璃容器.吸真空突出部的精整.第3部分:89mm標準直徑 | (Bottling industry. Wide mouth glass containers. Vacuum finish. Part 3 : 89 mm nominal diameter.) |
| NF H35-105-4 | 制瓶工業.寬口玻璃容器.吸真空突出部的精整.第4部分:100mm標準直徑 | (Bottling industry. Wide mouth glass containers. Vacuum lug finish. Part 4 : 100 mm nominal diameter.) |
| NF H44-023 | 煙霧發生器.內壓真空容器的阻力測定 | (AEROSOL GENERATORS. DETERMINATION OF THE RESISTANCE OF THE EMPTY CONTAINERS TO INTERNAL PRESSURE. VERIFICATION OF CONFORMITY TO TEST PRESSURE.) |
| NF J38-540 | 船舶和造船技術.載油艙用壓力/真空閥 | (Ships and marine technology - Pressure/vacuum valves for cargo tanks.) |
| NF L52-250-409 | 航空航天系列.飛行器用電纜.試驗方法.第409部分:真空老化試驗 | (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409 : air-excluded ageing.) |
| NF L95-012 | 航天產品保證.航天材料篩選的熱真空除氣試驗 | (Space product assurance - Thermal vacuum outgassing test for the screening of space materials.) |
| NF P16-200 | 建筑物外部的真空排污系統 | (VACUUM SEWERAGE SYSTEMS OUTSIDE BUILDINGS. (EUROPEAN STANDARD EN 1091).) |
| NF P16-210 | 建筑物中的真空排水系統 | (VACUUM DRAINAGE SYSTEMS INSIDE BUILDINGS. (EUROPEAN STANDARD EN 12109).) |
| NF P98-630 | 橫路標.公路上使用的標記.通過真空蒸餾測量冷油漆和涂料的揮發餾分 | (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. DETERMINATION OF VOLATILE CONTENTS OF PAINTS AND COLD PLASTICS BY VACUUM DISTILLATION.) |
| NF S31-704-2-1 | 家用和類似用途電氣設備.測定空氣噪聲的試驗規程.第2-1部分:真空吸塵器的特殊要求 | (Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1 : particular requirements for vacuum cleaners.) |
| NF S76-016 | 呼吸保護裝置.防有毒氣體和氣體顆粒吸入的真空管過濾半罩式面具.要求,試驗,標記 | (Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking.) |
| NF S90-240 | 外科醫療器械.生物抽樣用一次性器皿.真空器皿 | (Medico-surgical equipment. Single-use containers for biological samples. Evacuated tubes.) |
| NF S95-153 | 醫療抽吸設備.第3部分:真空或壓力源驅動的抽吸設備 | (Medical suction equipment - Part 3 : suction equipment powered from a vacuum or pressure source.) |
| NF S95-155 | 醫用氣體管道系統.第3部分:壓縮醫用氣體管道和真空管道 | (Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.) |
| NF S95-162 | 醫用氣體管道系統.第1部分:醫用壓縮氣體和真空裝置的終端元件 | (Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.) |
| NF T30-605 | 涂料.室內工程涂層.真空篩選機測定法 | (PAINTS. FILLERS FOR INTERIOR USE. SIEVE ANALYSIS USING A VACUMM SIENER.) |
| NF T54-941 | 塑料管道系統.熱水和冷水系統.真空密封性的檢驗方法 | (Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.) |
| NF T66-046 | 瀝青和瀝青粘合劑.用真空毛細管法測定動粘滯度 | (Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary.) |
| NF T70-516 | 軍用高能材料.安全、易損壞性.真空狀態下壓力計化學兼容性的研究 | (ENERGETIC MATERIALS FOR DEFENSE. SAFETY, VULNERABILITY. STUDY OF CHEMICAL COMPATIBILITY BY VACUUM STABILITY WITH MANOMETER.) |
| NF T70-517 | 軍用高能材料.安全、易損壞性.真空狀態下傳感器化學兼容性的研究 | (ENERGETIC MATERIALS FOR DEFENSE. SAFETY, VULNERABILITY. STUDY OF CHEMICAL COMPATIBILITY BY VACUUM STABILITY WITH TRANSDUCER.) |
| NF T70-531 | 國防用高能材料.安全性、易損性.水銀管真空試驗 | (Energetic materials for defense - Safety, vulnerability - Vacum test with mercury tube.) |
| NF T75-120 | 香精油.真空蒸餾殘?jiān)亩坑?jì)算 | (ESSENTIAL OILS. DETERMINATION OF THE RESIDUE ON VACUUM DISTILLATION.) |
| NF V03-621 | 葡萄糖.干燥后質量損失的測定.真空烘箱法 | (Dextrose. Determination of loss in mass on drying. Vacuum oven method.) |
| NF X10-500 | 真空技術.詞匯.一般術語 | (VACUUM TECHNOLOGY - VOCABULARY - GENERAL TERMS) |
| NF X10-501 | 真空技術.詞匯.真空泵 | (Vacuum technology. Vocabulary. Vacuum pumps.) |
| NF X10-507 | 真空技術.噴霧離子泵.功能特性的測定 | (VACUUM TECHNOLOGY - SPUTTER-ION PUMPS - MEASUREMENT OF PERFORMANCE CHARACTERISTICS) |
| NF X10-511 | 真空技術.真空體積初壓泵.體積流量的測定 | (Vacuum technology-positive-displacement vacuum pumps-measurement ofthe volume rate of flow (pumping speed).) |
| NF X10-519 | 真空技術.渦輪分子泵.功能特性的測定 | (VACUUM TECHNOLOGY - METHODS OF MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF TURBO-MOLECULAR PUMPS) |
| NF X10-520 | 真空技術.工業真空系統中壓力的測量 | (VACUUM TECHNOLOGY-PRESSURE MEASUREMENT IN INDUSTRIAL VACUUM SYSTEMS) |
| NF X10-521 | 真空技術.壓力計校準.直接比較法 | (VACUUM TECHNOLOGY. VACUUM GAUGES. CALIBRATION. METHOD BY DIRECT COMPARISON.) |
| NF X10-522 | 真空技術.電離壓力計.校準.直接比較法 | (VACUUM TECHNOLOGY. IONIZATION VACUUM GAUGES. CALIBRATION BY DIRECT COMPARISON.) |
| NF X10-523 | 真空技術.低壓壓力計校準的一般方法 | (VACUUM TECHNOLOGY.GENERAL METHODS FOR LOW PRESSURE GAUGE CALIBRATION) |
| NF X10-524 | 真空技術.壓力計.校準.動力學法 | (VACUUM TECHNOLOGY. VACUUM GAUGES. CALIBRATION. DYNAMIC METHOD.) |
| NF X10-541 | 真空技術.蒸汽噴射器的驗收試驗 | (VACUUM TECHNOLOGY. ACCEPTANCE TESTS FOR STEAM JET EJECTORS.) |
| 編號 | 中文名稱 | 英文名稱 |