微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS A1128 | 用壓力法測定新澆混凝土空氣含量的試驗方法 | Method of test for air content of fresh concrete by pressure method |
| JIS A1517 | 窗和門組合件.動態壓力的水密性試驗 | Windows and doorsets -- Watertightness test under dynamic pressure |
| JIS A9108 | 用壓力加工法經防腐劑處理的基木 | Foundation wood sill treated with preservatives by pressure processes |
| JIS B0190 | 壓力容器結構用術語匯編 | Glossary of terms used in construction of pressure vessels |
| JIS B6402 | 機械壓力機.精度測試 | Mechanical power presses -- Testing of the accuracy |
| JIS B6406 | 機械壓力機.A-加權聲壓級測量方法 | Mechanical presses -- Methods of measurement of A-weighted sound pressure level |
| JIS B6420 | 壓力機械.操作符號 | Presswork machinery -- Symbols for operations |
| JIS B6451 | 閉式雙柱壓力機.特性和尺寸 | Straight-sided power presses -- Characteristics and dimensions |
| JIS B6471 | 閉模壓力機鍛造用模塊 | Die blocks for closed-die press forging |
| JIS B6803 | 焊接、切割及相關工藝用壓力調節器 | Pressure regulator for welding, cutting and allied processes |
| JIS B7529 | 蒸氣壓力溫度計 | Vapour pressure thermometers |
| JIS B7610-1 | 壓力平衡.第1部分:計量要求 | Pressure balances -- Part 1: Metrological requirements |
| JIS B7610-2 | 壓力平衡.第2部分:試驗方法 | Pressure balances -- Part 2: Test methods |
| JIS B7610-3 | 壓力平衡.第3部分:操作程序和條件 | Pressure balances -- Part 3: Operation procedure and conditions |
| JIS B8006 | 往復式內燃機性能的壓力測量 | Pressure measurements of performance for reciprocating internal combustion engines |
| JIS B8210 | 蒸汽鍋爐和壓力容器.彈簧加載安全閥 | Steam boilers and pressure vessels -- Spring loaded safety valves |
| JIS B8238 | 液化石油氣用壓力調節器 | Pressure regulators for liquefied petroleum gas |
| JIS B8240 | 致冷用壓力容器的結構 | Construction of pressure vessels for refrigeration |
| JIS B8247 | 壓力容器封頭 圧力容器用鏡板 |
Formed head for pressure vessel |
| JIS B8247 AMD 1 | 壓力容器封頭（修改件1） 圧力容器用鏡板（追補１） |
Formed head for pressure vessel (Amendment 1) |
| JIS B8248 | 圓柱形雙層壓力容器 円筒形多層圧力容器 |
Cylindrical layered pressure vessels |
| JIS B8265 | 壓力容器的結構.一般原則 圧力容器の構造 ― 一般事項 |
Construction of pressure vessel -- General principles |
| JIS B8265 AMD 1 | 壓力容器的結構.一般原則（修改件1） 圧力容器の構造―一般事項（追補１） |
Construction of pressure vessel -- General principles (Amendment 1) |
| JIS B8265 AMD 2 | 壓力容器的結構.一般原則（修改件2） 圧力容器の構造―一般事項（追補２） |
Construction of pressure vessel -- General principles (Amendment 2) |
| JIS B8266 | 壓力容器結構用替換標準 圧力容器の構造 ― 特定規格 |
Alternative standard for construction of pressure vessels |
| JIS B8266 AMD 1 | 壓力容器制造用代替標準( 修改件1) 圧力容器の構造―特定規格（追補1） |
Alternative standard for construction of pressure vessels (Amendment 1) |
| JIS B8274 | 壓力容器用平管板 圧力容器の管板 |
Flat tubesheet for pressure vessels |
| JIS B8277 | 壓力容器用膨脹接合 圧力容器の伸縮継手 |
Expansion joint for pressure vessels |
| JIS B8278 | 鞍座支撐式水平壓力容器 サドル支持の橫置圧力容器 |
Saddle supported horizontal pressure vessels |
| JIS B8279 | 壓力容器罩 圧力容器のジャケット |
Jacket for pressure vessels |
| JIS B8280 | 非圓形橫截面的壓力容器 非円形胴の圧力容器 |
Pressure vessels of noncircular cross section |
| JIS B8284 | 壓力容器用快速關閉 圧力容器の急速開閉ふた裝置 |
Quick closure for pressure vessels |
| JIS B8285 | 壓力容器的焊接程序合格鑒定試驗 | Welding procedure qualification test for pressure vessels |
| JIS B8286 | 壓力容器用觀察鏡 | Sight glasses for pressure vessels |
| JIS B8316-2 | 容積真空泵.性能特性的測定.第2部分:極限壓力的測定 | Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure |
| JIS B8317-2 | 蒸氣真空泵.性能特性測量.第2部分:臨界托持壓力的測量 | Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure |
| JIS B8349-2 | 液壓傳動.系統和組件中產生的壓力波動級別的測定.第2部分:泵的簡化法 | Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 2: Simplified method for pumps |
| JIS B8356-7 | 液壓動力.過濾器.過濾器性能的評價.第7部分:微分壓力與流動特性關系的評價 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 7: Evaluation of differential pressure versus flow characteristics |
| JIS B8357 | 液壓動力.帶壓力補償?shù)牧髁靠刂崎y.安裝面 | Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces |
| JIS B8366-2 | 流體動力系統和元件.液壓缸.元件和識別碼.第2部分:標稱壓力 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 2: Nominal pressures |
| JIS B8372-1 | 液壓流體動力.壓縮空氣壓力調節器和過濾調節器.第1部分:廠商資料和產品生產要求應包含的主要特性 | Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements |
| JIS B8372-2 | 氣動流體動力.壓縮空氣壓力調節器和過濾調節器.第2部分:廠商資料應包含的主要特性測定的試驗方法 | Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
| JIS B8397 | 液壓流體動力.帶分離器的氣-液蓄壓器.壓力和容積的范圍及特征數量 | Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities |
| JIS B8409 AMD 1 | 燃油器用壓力式電磁泵（修改件1） | Pressure type solenoid pumps for oil burners (Amendment 1) |
| JIS B8409 | 燃油器用壓力式電磁泵 | Pressure type solenoid pumps for oil burners |
| JIS B8418 | 非壓力式熱水器 | Non pressure type hot water generator |
| JIS B8660 | 液壓動力.流量和壓力控制閥.試驗方法 | Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods |
| JIS B8664 | 液壓流體動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥. 安裝表面 | Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces |
| JIS B8667 | 液壓傳動.壓力開關.安裝表面 | Hydraulic fluid power -- Pressure switches -- Mounting surfaces |
| JIS B8670 | 流體動力系統和元件.標稱壓力 | Fluid power systems and components -- Nominal pressures |
| JIS B9939-2 | 液壓流體動力.測量技術.第2部分:封閉管道中平均穩態壓力的測量 | Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit |
| JIS B9950 | 壓力擺轉吸收器.詞匯 | Pressure swing adsorption apparatus -- Vocabulary |
| JIS B9951 | 壓力擺動吸收器.試驗方法 | Pressure swing adsorption apparatus -- Test methods |
| JIS C1031 | 工業過程控制系統用壓力和壓差傳感器的性能評價方法 | Methods of evaluating the performance of pressure and differential pressure transmitters for use in industrial-process control systems |
| JIS C1507 | 電聲學.聲音強度的測量用儀器.雙壓力傳感擴音器的測量 | Electroacoustics -- Instruments for the measurement of sound intensity -- Measurement with pairs of pressure sensing microphones |
| JIS C2813 | 建筑物電氣裝置用彈簧壓力型電線連接器 | Spring pressure type wire connectors for electrical installations of buildings |
| JIS C3660-3-1 | 電纜和光纜的絕緣和鎧裝材料的通用試驗方法.第3-1部分:聚氯乙烯復合物專用方法.高溫下壓力試驗.耐裂性試驗 | Common test methods for insulating and sheathing materials of electric and optical cables -- Part 3-1: Methods specific to PVC compounds -- Pressure test at high temperature -- Test for resistance to cracking |
| JIS C8367 | 家用設備用機電壓力式衡溫器 | Electromechanical pressure type thermostats for household appliances |
| JIS D5803 | 汽車潤滑油壓力警報燈開關 | Warning lamp switches of lubricating oil pressure for automobiles |
| JIS D5814 | 汽車用真空壓力開關 | Vacuum pressure switches for automobiles |
| JIS E4118 | 鐵路機車車輛用波登管壓力計 | Bourdon tube pressure gauges for railway rolling stock |
| JIS F0504 | 船上機械裝置用減壓閥的應用和設定壓力 | Application and setting pressure of relief valves for ships' machinery |
| JIS F7003 | 造船.船用壓力表的應用 | Shipbuilding -- Application of pressure gauges on board |
| JIS F7341 | 造船.鍛鋼制100K壓力計閥 | Shipbuilding -- Forged steel 100K pressure gauge valves |
| JIS F7343 | 造船.青銅制20K壓力計旋塞 | Shipbuilding -- Bronze 20K pressure gauge cocks |
| JIS F9701 | 造船.壓力開關 | Shipbuilding -- Pressure switches |
| JIS F9704 | 船舶用電子壓力傳感器 | Marine electronic pressure transmitters |
| JIS G0801 | 壓力容器用鋼板的超聲檢驗 | Ultrasonic examination of steel plates for pressure vessels |
| JIS G3103 | 鍋爐和壓力容器用碳鋼和鉬合金鋼厚板材 | Carbon steel and molybdenum alloy steel plates for boilers and pressure vessels |
| JIS G3115 | 中溫設備壓力容器用鋼板 | Steel plates for pressure vessels for intermediate temperature service |
| JIS G3118 | 中溫設備壓力容器用碳素鋼板 | Carbon steel plates for pressure vessels for intermediate and moderate temperature services |
| JIS G3119 | 鍋爐和壓力容器用錳-鉬和錳-鉬-鎳合金鋼厚板材 | Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates for boilers and pressure vessels |
| JIS G3120 | 壓力容器用淬火和回火的錳鉬及錳鉬鎳合金鋼板 | Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates quenched and tempered for pressure vessels |
| JIS G3124 | 中溫壓力容器用高強度鋼板 | High strength steel plates for pressure vessel for intermediate and moderate temperature service |
| JIS G3126 | 低溫壓力容器用碳素鋼板 | Carbon steel plates for pressure vessels for low temperature service |
| JIS G3127 | 低溫設備壓力容器用鎳鋼板 | Nickel steel plates for pressure vessels for low temperature services |
| JIS G3202 | 壓力容器用碳素鋼鍛件 | Carbon steel forgings for pressure vessels |
| JIS G3203 | 高溫壓力容器用合金鋼鍛件 | Alloy steel forgings for pressure vessels for high-temperature service |
| JIS G3204 | 壓力容器用淬火和回火的合金鋼鍛件 | Quenched and tempered alloy steel forgings for pressure vessels |
| JIS G3205 | 低溫壓力容器用碳素鋼及合金鋼鍛件 | Carbon and alloy steel forgings for pressure vessels for low-temperature service |
| JIS G3206 | 高溫下壓力容器用高強度鉻-鉬合金鋼鍛件 | High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service |
| JIS G3214 | 壓力容器用不銹鋼鍛件 | Stainless steel forgings for pressure vessels |
| JIS G3454 | 壓力設備用碳鋼管 | Carbon steel pipes for pressure service |
| JIS G4109 | 鍋爐和壓力容器用鉻鉬合金鋼板 | Chromium-molybdenum alloy steel plates for boilers and pressure vessels |
| JIS G4110 | 高溫下壓力容器用高強度鉻鉬和鉻鉬釩合金鋼板 | High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels under high-temperature service |
| JIS H7201 | 吸氫合金的壓力-組成-溫度(PCT)關系用測量方法 | Method for measurement of pressure-composition-temperature(PCT) relations of hydrogen absorbing alloys |
| JIS K2258 | 原油和石油產品.蒸發壓力的測定.里德法 | Crude oil and petroleum products -- Determination of vapour pressure -- Reid method |
| JIS K5600-3-5 | 涂料試驗方法.第3部分:成膜性.第5節:堆疊性壓力試驗 | Testing methods for paints -- Part 3: Film formability -- Section 5: Pressure test for stackability |
| JIS K7030 | 玻璃纖維增強熱固性塑料(GRP)制管道和配件.與壓力相關的術語定義、包括術語之間的關系及安裝和連接的術語 | Pipes and fittings made of glass fiber reinforced thermosetting plastics (GRP) -- Definitions of terms relating pressure, including relationships between them, and terms for installation and jointing |
| JIS P8131 | 紙張和紙板.用馬倫式高壓力試驗機測定產品脆裂強度 | Paper and board -- Determination of bursting strength by Mullen high-pressure tester |
| JIS R9301-3-4 | 礬粉.第3部分:化學分析方法.第4節:壓力容器中的酸性測定 | Alumina powder -- Part 3: Methods of chemical analysis -- 4: Decomposition by acid in pressure vessel |
| JIS S2302 | 汽水飲料瓶的抗內壓力試驗法 | Method of internal pressure test for carbonated beverage bottles |
| JIS S3200-1 | 供水服務設備.靜水壓力的測試方法 | Equipment for water supply service -- Test methods of hydrostatic pressure |
| JIS S3200-5 | 供水服務設備.用真空壓力法破壞測試方法 | Equipment for water supply service -- Test methods of destruction by vacuum pressure |
| JIS T3351 | 壓力監測用管設備 | Tubing set for pressure monitoring |
| JIS T9111-6 | 橡膠避孕套.第6部分:破裂容積和壓力的測定 | Rubber condoms -- Part 6: Determination of bursting volume and pressure |
| JIS W0125-1 | 航空航天.流體系統.詞匯.第1部分:與壓力有關的一般術語和定義 | Aerospace -- Fluid systems -- Vocabulary -- Part 1: General terms and definitions relating to pressure |
| JIS W0814 | 飛行器設備.機載設備的環境和工作條件.濕度、溫度和壓力試驗 | Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests |
| JIS W1841 | 航空航天.氣動、壓力補償式變量傳送泵.一般要求 | Aerospace -- Hydraulic, pressure compensated, variable delivery pumps -- General requirements |
| JIS W2921 | 航空航天.液壓系統和部件.壓力和溫度分類 | Aerospace -- Fluid systems and components -- Pressure and temperature classifications |
| JIS W3202 | 飛行器.壓力加油連接件 | Aircraft -- Pressure refuelling connections |
| JIS W3211 | 飛行器.壓力加油連接 | Aircraft -- Pressure re-oiling connection |
| JIS Z2332 | 用壓力變化測量檢測漏泄的試驗方法 | Test method for leaks using the pressure change measurement |
| JIS Z2342 | 壓力試驗過程中壓力容器的聲波發射測試方法和試驗結果的分類 | Methods for acoustic emission testing of pressure vessels during pressure tests and classification of test results |
| JIS Z3881 | 氣體壓力焊接技術合格鑒定標準程序 | Standard qualification procedure for gas pressure welding technique |
| JIS Z8707 | 壓力式溫度計和雙金屬溫度計溫度測量方法 | Method of temperature measurement by filled-system thermometers and bimetallic thermometers |
| JIS Z8751 | 通過液體靜壓力壓頭差讀取真空計的方法 | Reading methods of the vacuum gauges by means of the head difference in the hydrostatic pressure |
| JIS Z8817 | 可燃粉塵的爆炸壓力和壓力上升速率的試驗方法 | Test method for explosion pressure and rate of pressure rise of combustible dusts |
| 編號 | 中文名稱 | 英文名稱 |