微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS B4130 | 金剛石/立方晶體氮化硼產品.金剛石或立方晶體氮化硼的粒度 | Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride |
| JIS B4131 | 金剛石/立方晶體氮化硼產品.金剛石或立方晶體氮化硼砂輪 | Diamond/CBN products -- Diamond or CBN grinding wheels |
| JIS B4138 | 金剛石/立方晶體氮化硼產品.金剛石或立方晶體氮化硼分割鋸 | Diamond/CBN products -- Diamond or CBN segmented saws |
| JIS B4141 | 金剛石/立方晶體氮化硼產品.金剛石或立方晶粒氮化硼砂輪和鋸.形狀的尺寸特性和代碼 | Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms |
| JIS B6915 | 鋼鐵的滲氮和碳氮共滲工藝 | Process of nitriding and nitrocarburizing of iron and steel |
| JIS B7953 | 大氣中氮氧化合物的連續分析儀 | Continuous analyzers for oxides of nitrogen in ambient air |
| JIS B7982 | 煙道廢氣中氧化氮的自動測量系統和分析儀 | Automated measuring systems and analyzers for nitrogen oxides in flue gas |
| JIS B7988 | 廢氣中氧化亞氮用連續分析器 | Continuous analyzers for dinitrogen monoxide in flue gas |
| JIS B7992 | 用非萃取法測定煙道廢氣中氮的氧化物的自動測量系統 | Automated measuring systems for oxides of nitrogen in flue gas using non-extractive methods |
| JIS C6492 | 印制電路基板材料.限定可燃性(垂直燃燒試驗)的雙馬來酰亞胺/三氮雜苯改良環氧衍生物機織玻璃纖維包銅層壓片 | Base materials for printed circuits -- Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
| JIS C6524 | 多層印制線路板用半固化片.BISMALEIMIDE/三氮雜苯/環氧樹脂浸漬玻璃布 | Prepreg for multilayer printed wiring boards -- Bismaleimide/Triazine/Epoxide resin-impregnated glass cloth |
| JIS D1030 | 汽車.排氣中一氧化碳、二氧化碳、總烴類和氧化氮含量測量的分析程序 | Automobiles -- Analytical procedure for measurement of carbon monoxide, carbon dioxide, total hydrocarbons and oxides of nitrogen in exhaust gas |
| JIS G0562 | 鋼和鐵滲氮層深度的測量方法 | Method of measuring nitrided case depth for iron and steel |
| JIS G0563 | 滲氮鋼和鐵的表面硬度的測量方法 | Method of measuring surface hardness for nitrided iron and steel |
| JIS G1228 AMD 1 | 鋼鐵.氮含量的測定方法(修改件1) | Iron and steel -- Methods for determination of nitrogen content (Amendment 1) |
| JIS G1228 | 鋼鐵中氮含量的測定方法 | Iron and steel -- Methods for determination of nitrogen content |
| JIS G7502 | 鍛造氮化鋼 | Wrought nitriding steels |
| JIS H1612 | 鈦和鈦合金中氮的測定方法 | Methods for determination of nitrogen in titanium and titanium alloys |
| JIS H1653 | 鋯及鋯合金中氮的測定方法 | Methods for determination of nitrogen in zirconium and zirconium alloys |
| JIS H1685 | 鉭中氮的測定方法 | Method for determination of nitrogen in tantalum |
| JIS H8690 | 干式處理氮化鈦鍍層 | Titanium nitride coatings by dry processing |
| JIS K0104 | 廢氣中氧化氮含量的測定方法 | Methods for determination of nitrogen oxides in flue gas |
| JIS K0400-44-40 | 水質.基爾達氮的測定.用硒礦化后的檢測方法 | Water quality -- Determination of Kjeldahl nitrogen -- Method after mineralization with selenium |
| JIS K0400-45-10 | 水質.氮的測定.用戴氏合金還原后的催化消化 | Water quality -- Determination of nitrogen -- Catalytic digestion after reduction with Devarda's alloy |
| JIS K1107 | 氮?dú)? | Nitrogen |
| JIS K2609 | 原油和石油產品.氮含量的測定 | Crude petroleum and petroleum products -- Determination of nitrogen content |
| JIS K6217-2 | 橡膠工業用碳黑.基本特性.第2部分:特定表面面積的測定.氮吸收法.單點法 | Carbon black for rubber industry -- Fundamental characteristics -- Part 2: Determination of specific surface area -- Nitrogen adsorption methods -- Single-point procedures |
| JIS K7245 | 塑料.環氧化胺硬化劑.伯胺、仲胺和叔胺族氮含量的測定 | Plastics -- Amine epoxide hardeners -- Determination of primary, secondary and tertiary amine group nitrogen content |
| JIS K8776 | 2-羥基-1-(2'羥基-4'-磺基-1'-萘偶氮)-3-萘酸 | 2-Hydroxy-1-(2-hydroxy-4-sulfo-1-naphthylazo)-3-naphthoic acid |
| JIS K8826 AMD 1 | 氮化物分析用氫氧化鈉（修改件1） | Sodium hydroxide for nitrogen compounds analysis (Amendment 1) |
| JIS K8826 | 氮化物分析用氫氧化鈉 | Sodium hydroxide for nitrogen compounds analysis |
| JIS K9501 | 疊氮化鈉 | Sodium azide |
| JIS K9524 | 偶氮砷 III | Arsenazo III |
| JIS L0855 | 耐氧化氮染色牢度試驗方法 | Test methods for colour fastness to nitrogen oxides |
| JIS P4505 | 重氮感光紙 | Diazo Sensitized Papers |
| JIS R1603 | 精細陶瓷用氮化硅細粉末的化學分析方法 | Methods for chemical analysis of fine silicon nitride powders for fine ceramics |
| JIS R1640 | 氮化硅的定量相位分析方法 | Methods for the quantitative phase analysis of silicon nitride |
| JIS R1669 | 精細陶瓷.滾動軸承球的氮化硅材料的基本特征和分類 | Fine ceramics -- Fundamental characteristics and classification of silicon nitride materials for rolling bearing balls |
| JIS R1675 | 精細陶瓷用精細氮化鋁粉的化學分析方法 | Methods for chemical analysis of fine aluminium nitride powders for fine ceramics |
| JIS R1701-1 | 精細陶瓷(高級陶瓷、高級工業陶瓷).光催化材料的空氣凈化性能試驗方法.第1部分:氧化氮的清除 | Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials -- Part 1: Removal of nitric oxide |
| JIS S3032 | 開放式強制通風燃油空間取暖爐用氧化氮排放率的測量方法 | Measurement method of NOx emission rate for open type forced ventilating oil burning space heaters |
| JIS T7403-2 | 外科植入物用不銹鋼基合金.第2部分:鍛制的高氮不銹鋼 | Stainless steel based alloys for surgical implant applications -- Part 2: Wrought high nitrogen stainless steel |
| 編號 | 中文名稱 | 英文名稱 |