微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS A8604 | 建筑工程用潛水泵 | Submersible pumps for construction |
| JIS B0119 | 水輪機及雙向旋轉泵水輪機.詞匯 | Hydraulic turbines and reversible pump turbines -- Vocabulary |
| JIS B0131 | 渦輪泵術語集 | Glossary of terms for turbopumps |
| JIS B2292-1 | 液壓傳動.容積式泵和發動機的安裝盤與軸端的尺寸和識別代碼.第1部分:用米制單位表示的英寸系列 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units |
| JIS B2292-2 | 液壓傳動.容積式泵和發動機的安裝盤與軸端的尺寸和識別代碼.第2部分:米制系列 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series |
| JIS B4626 | 水泵鉗 | Water pump pliers |
| JIS B8103 | 水輪機及雙向泵水渦輪的模型試驗方法 | Methods for model tests of hydraulic turbine and reversible pump-turbine |
| JIS B8301 ERRATUM 1 | 旋轉動力泵.液壓性能驗收試驗.1級和2級(勘誤1) | Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2 (Erratum 1) |
| JIS B8301 | 旋轉動力泵.液壓性能驗收試驗.1級和2級 | Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2 |
| JIS B8302 | 泵抽排量的測量方法 | Measurement methods of pump discharge |
| JIS B8306 | 離心油泵.用油作為測試液體的液壓性能驗收試驗 | Centrifugal type oil pumps -- Hydraulic performance acceptance tests by oil as testing liquid |
| JIS B8310 | 泵用加權噪聲壓強的測量方法 | Methods of a-weighted sound pressure level measurement for pumps |
| JIS B8311 | 往復式泵.液壓性能驗收試驗 | Reciprocating pumps -- Hydraulic performance acceptance tests |
| JIS B8312 | 齒輪泵和螺旋泵.液壓性能驗收試驗 | Gear pumps and screw pumps -- Hydraulic performance acceptance tests |
| JIS B8313 | 端吸離心泵 | End suction centrifugal pumps |
| JIS B8314 AMD 1 | 淺井電泵（修改件1） | Electric shallow well pumps (Amendment 1) |
| JIS B8314 | 淺井電泵 | Electric shallow well pumps |
| JIS B8316-1 | 容積真空泵.性能特性的測定.第1部分:容積流量的測定(泵速) | Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed) |
| JIS B8316-2 | 容積真空泵.性能特性的測定.第2部分:極限壓力的測定 | Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of ultimate pressure |
| JIS B8317-1 | 蒸氣真空泵.性能特性的測定.第1部分:容積流量的測定(泵速) | Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed) |
| JIS B8317-2 | 蒸氣真空泵.性能特性測量.第2部分:臨界托持壓力的測量 | Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure |
| JIS B8318 | 深井電泵 深井戸用電気井戸ポンプ | Electric deep well pumps |
| JIS B8318 AMD 1 | 電動深井泵（修改件1） 深井戸用電気井戸ポンプ（追補１） | Electric deep well pumps (Amendment 1) |
| JIS B8319 | 小型多級離心泵 小形多段遠心ポンプ | Small size multi-stage centrifugal pumps |
| JIS B8322 | 雙吸螺旋泵 両吸込渦巻ポンプ | Double suction volute pumps |
| JIS B8323 | 水環真空泵 水封式真空ポンプ | Water ring vacuum pumps |
| JIS B8324 | 深井潛水電動泵 深井戸用水中モータポンプ | Submersible motor pumps for deep well |
| JIS B8325 | 水池用潛水泵 設備排水用水中モータポンプ | Submersible motor pumps for sump |
| JIS B8327 | 利用模型泵測試泵性能的試驗方法 模型によるポンプ性能試験方法 | Testing methods for performance of pump, using model pump |
| JIS B8348 | 液壓流體動力.泵和電動機.試驗方法 | Hydraulic fluid power -- Pumps and motors -- Test methods |
| JIS B8349-2 | 液壓傳動.系統和組件中產生的壓力波動級別的測定.第2部分:泵的簡化法 | Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 2: Simplified method for pumps |
| JIS B8350-1 | 液壓流體動力.氣載噪聲級測定的試驗規程.第1部分:泵 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps |
| JIS B8350-3 | 液壓流體動力.氣載噪聲級測定的試驗規程.第3部分:泵.采用平行六面體麥克風排列法 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array |
| JIS B8351 | 液壓葉片泵 | Vane pumps for hydraulic use |
| JIS B8352 | 液壓齒輪泵 | Gear pumps for hydraulic use |
| JIS B8382 | 液壓流體動力.無源活塞置換泵和馬達.推導容量的測定 | Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity |
| JIS B8383 | 液壓流體動力.泵和馬達.幾何位移量 | Hydraulic fluid power -- Pumps and motors -- Geometric displacements |
| JIS B8384 | 液壓動力.正排量泵、電機和整體傳動裝置.穩態性能的測定 | Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance |
| JIS B8385 | 液壓動力.泵、電機和整體傳動裝置.參數定義和字母符號 | Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols |
| JIS B8409 AMD 1 | 燃油器用壓力式電磁泵（修改件1） | Pressure type solenoid pumps for oil burners (Amendment 1) |
| JIS B8409 | 燃油器用壓力式電磁泵 | Pressure type solenoid pumps for oil burners |
| JIS B8615-1 | 非管道式空調和熱泵.性能試驗和評定 | Non-ducted air conditioners and heat pumps -- Testing and rating for performance |
| JIS B8615-2 | 管道通風空調和空氣對空氣熱泵.性能的試驗和額定值 | Ducted air-conditioners and air-to-air heat pumps -- Testing and rating for performance |
| JIS B8627-1 | 燃?xì)獍l(fā)動機驅動的熱泵空調器.第1部分:一般要求 | Gas engine driven heat pump air conditioners -- Part 1: General requirements |
| JIS B8627-2 | 燃?xì)獍l(fā)動機驅動的熱泵空調器.第2部分:無管道輸送的燃?xì)獍l(fā)動機驅動的熱泵空調器.性能的試驗和額定值 | Gas engine driven heat pump air conditioners -- Part 2: Non-ducted gas engine driven heat pump air conditioners -- Testing and rating for performance |
| JIS B8627-3 | 燃?xì)獍l(fā)動機驅動的熱泵空調器.第3部分:有管道輸送的燃?xì)獍l(fā)動機驅動的熱泵空調器.性能的試驗和額定值 | Gas engine driven heat pump air conditioners -- Part 3: Ducted gas engine driven heat pump air conditioners -- Testing and rating for performance |
| JIS B8661 | 液壓流體動力.電控油壓泵試驗方法 | Hydraulic fluid power -- Test method for electrically controlled oil hydraulic pumps |
| JIS C6122-6 | 光纖放大器.試驗方法.第6部分:泵激泄漏參數的試驗方法 | Optical fiber amplifiers -- Test methods -- Part 6: Test methods for pump leakage parameters |
| JIS C9335-2-40 | 家用和類似用途電氣設備的安全.第2-40部分:電熱泵、空調和減濕器的特殊要求 | Household and similar electrical appliances -- Safety -- Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| JIS C9335-2-41 | 家用和類似用途電器.安全.第2-41部分:泵的特殊要求 | Household and similar electrical appliances -- Safety -- Part 2-41: Particular requirements for pumps |
| JIS C9335-2-51 | 家用和類似用途電器.安全.第2-51部分:加熱和供水設施用固定式循環泵的特殊要求 | Household and similar electrical appliances -- Safety -- Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| JIS D0116-1 | 柴油發動機.噴油設備詞匯.第1部分:噴油泵 | Diesel engines -- Vocabulary of fuel injection equipment -- Part 1: Fuel injection pumps |
| JIS D3601 | 汽車.機械式燃油泵 | Automobiles -- Mechanical fuel pumps |
| JIS D3603-1 | 柴油發動機.噴油泵的安裝尺寸.第1部分:炮架形安裝直列多柱塞泵 | Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 1: Cradle-mounted in-line pumps |
| JIS D3603-2 | 柴油發動機.噴油泵的安裝尺寸.第2部分:公軌燃料噴射系統用基座安裝直列多柱塞泵和高壓供給泵 | Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 2: Base-mounted in-line pumps and high-pressure supply pumps for common rail fuel injection systems |
| JIS D3603-3 | 柴油發動機.噴油泵的安裝尺寸.第3部分:端蓋凸緣安裝泵用法蘭 | Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 3: Flanges for end flange-mounted pumps |
| JIS D3606 | 汽車.電動燃油泵 | Automobiles -- Electric fuel pumps |
| JIS D3608 | 柴油機.噴油泵和輪轂軸末端錐度 | Diesel engines -- Tapers for shaft ends of fuel injection pumps and hubs |
| JIS D3633 | 道路車輛.燃料噴射泵的試驗.第1部分:動態條件 | Road vehicles -- Fuel injection pump testing -- Part 1: Dynamic conditions |
| JIS D3634 | 道路車輛.燃料噴射泵的試驗.第2部分:靜態條件 | Road vehicles -- Fuel injection pump testing -- Part 2: Static conditions |
| JIS D3635 | 道路車輛.燃料噴射泵的試驗.第3部分:應用及試驗程序 | Road vehicles -- Fuel injection pump testing -- Part 3: Application and test procedures |
| JIS D3636 | 道路車輛.柴油機燃料噴射泵試驗.樞軸型校準噴嘴 | Road vehicles -- Diesel fuel injection equipment testing -- Pintle type calibrating nozzle |
| JIS D3638 | 道路車輛.柴油發動機.注油泵檢驗.燃料噴射器的校準 | Road vehicles -- Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors |
| JIS D3651 | 柴油發動機.高壓燃料噴射泵組件.一般要求和尺寸 | Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions |
| JIS F6721 | 船用液壓舵機液壓泵的工廠試驗方法 | Shop test method for oil pressure pumps at hydraulic steering gears for ships |
| JIS S2037 | 燃油裝置的注油泵 | Filler pumps for oil burning appliances |
| JIS T0601-2-24 | 醫用電氣設備.第2-24部分:輸液泵和控制器安全專用要求 | Medical electrical equipment -- Part 2-24: Particular requirements for the safety of infusion pumps and controllers |
| JIS T1603 | 人工心肺的電動血液泵 | Electric motor driven blood pump for cardiopulmonary bypass |
| JIS T1653 | 注液泵 | Infusion pumps |
| JIS W1841 | 航空航天.氣動、壓力補償式變量傳送泵.一般要求 | Aerospace -- Hydraulic, pressure compensated, variable delivery pumps -- General requirements |
| JIS Z8126-2 | 真空技術.詞匯.第2部分:真空泵和相關術語 | Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms |
| 編號 | 中文名稱 | 英文名稱 |