微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10096 | 航空航天.等級為:450 MPa(環境溫度)/425℃、600 MPa(環境溫度)/235℃、600 MPa(環境溫度)/315℃、600 MPa( | Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temperature)/650 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature) /730 °C and 1100 MPa (at ambiente temperature)/600 °C - Dimensions |
| ISO 1022 | 航空航天 流體系統用氣態氧充氣接頭(舊型) 尺寸(英制系列) | Aerospace; gaseous oxygen replenishment connection for use in fluid systems (old type); dimensions (inch series) |
| ISO 10299 | 航空航天 實心鉚釘 材料和米制的識別 | Aerospace - Rivets, solid - Material and metric series identification |
| ISO 10502 | 航空航天.溫度為230℃及以下、壓力為10500 kPa下使用的聚四氟乙烯(PTFE)軟管組件.采購規范 | Aerospace; hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa; procurement specification |
| ISO 10583 | 航空航天 流體系統 導管/組件試驗方法 | Aerospace fluid systems; test methods for tube/fitting assemblies |
| ISO 10792-1 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第1部分:米制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series |
| ISO 10792-2 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series |
| ISO 10792-3 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第3部分:技術規范 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification |
| ISO 10955 | 航空航天 航空器操縱鋼絲繩用末端接頭和松緊套筒 技術規范 | Aerospace - End-fittings and turnbarrels for aircraft control wire rope - Technical specification |
| ISO 10959 | 航空航天 MJ螺紋 量規 | Aerospace - MJ threads - Gauging |
| ISO 11077 | 航空航天 自行式除冰和防冰車 功能要求 | Aerospace; self-proppelled de-icing/anti-icing vehicles; functional requirements |
| ISO 11217 | 航空航天 液壓系統液體污染物 取樣點位置和取樣準則 | Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling |
| ISO 11218 | 航空航天 液壓油液清潔度分級 | Aerospace; cleanliness classification for hydraulic fluids |
| ISO 12 | 航空航天 管路 識別標志 | Aerospace; Pipelines; Identification |
| ISO 12256 | 航空航天.內十字形槽扳手.米制系列 | Aerospace - Drives, internal, cruciform, ribbed - Metric series |
| ISO 12258 | 航空航天 強度等級小于或等于1275MPa、金屬材料制成、有涂覆或未涂覆、具有長MJ螺紋及大徑或中徑桿型的雙六 | Aerospace - Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions |
| ISO 12260 | 航空航天 強度等級小于或等于1100MPa、金屬材料制成、有涂覆或未涂覆、短的或中等長度MJ螺紋,階梯桿型、內 | Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| ISO 12261 | 航空航天 強度等級小于或等于1100MPa、金屬材料制成、有涂覆或未涂覆、長長度MJ螺紋、中徑桿型、內偏高扭矩 | Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| ISO 12268 | 航空航天.等級為:450 MPa(環境溫度)/425℃、600 MPa(環境溫度)/235℃、600 MPa(環境溫度)/315℃、600 MPa( | Aerospace - Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads; classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temperature)/650 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/730 °C and 1100 MPa (at ambiante temperature)/600 °C - Dimensions |
| ISO 12272 | 航空航天.等級為:900 MPa(環境溫度)/235℃、900 MPa(環境溫度)/315℃和900 MPa(環境溫度)/425℃,帶增大沉孔 | Aerospace - Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 12273 | 航空航天.等級為:900 MPa(環境溫度)/235℃、900 MPa(環境溫度)/315℃和900 MPa(環境溫度)/425℃,帶MJ螺紋自 | Aerospace - Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads; classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 12274 | 航空航天.等級為:900 MPa(環境溫度)/235℃、900 MPa(環境溫度)/315℃、900 MPa(環境溫度)/425℃,帶MJ螺紋自 | Aerospace - Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads; classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 12277 | 航空航天 等級為:1100 MPa(環境溫度)/120℃、1100 MPa(環境溫度)/235℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 12278 | 航空航天.等級為:900 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/235℃、1250 MPa(環境溫度)/235℃和550 MPa | Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient temperature)/235 °C - Dimensions |
| ISO 12280 | 航空航天 筒形自鎖螺母用彈性金屬片保持架 尺寸 | Aerospace - Retainers, spring, sheet metal, for self-locking barrel nuts - Dimensions |
| ISO 12281 | 航空航天.經過或未經過表面處理的金屬材料制100°普通沉頭實心鉚釘.尺寸 | Aerospace - Rivets, solid, 100° normal countersunk head, in metallic material, with or without surface treatment - Dimensions |
| ISO 12288 | 航空航天 鎳合金實心鉚釘 采購規范 | Aerospace - Rivets, solid, in nickel alloy - Procurement specification |
| ISO 12289 | 航空航天.防腐蝕鋼制實心鉚釘.采購規范 | Aerospace - Rivets, solid, in corrosion-resisting steel - Procurement specification |
| ISO 12290 | 航空航天 鈦和鈦合金實心鉚釘 采購規范 | Aerospace - Rivets, solid, in titanium or titanium alloy - Procurement specification |
| ISO 12319 | 航空航天. 'P'(環形)夾具.獲取規范 | Aerospace - 'P' (loop style) clamps - Procurement specification |
| ISO 12333 | 航空航天 連續置換液壓馬達 35000 kPa系統的一般規范 | Aerospace - Constant-displacement hydraulic motors - General specifications for 35000 kPa systems |
| ISO 12334 | 航空航天 帶壓力補償?shù)淖兞髁恳簤罕?35000 kPa系統的一般要求 | Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems |
| ISO 13411 | 航空航天 飛機結構用滾針、滾柱和滾道式滾子軸承 技術規范 | Aerospace - Airframe needle roller, cylindrical roller and track roller bearings - Technical specification |
| ISO 13412 | 航空航天 飛機結構用軛型單列密封的滾針滾道式滾子 英制系列 | Aerospace - Airframe needle track roller, yoke type, single-row, sealed - Inch series |
| ISO 13413 | 航空航天 飛機結構用軛型、雙列密封的滾針滾道式滾子 英制系列 | Aerospace - Airframe needle track roller, yoke type, double-row, sealed - Inch series |
| ISO 13414 | 航空航天 飛機結構用帶檔邊的單列滾針軸承 英制系列 | Aerospace - Airframe needle roller bearings, single-row, shielded - Inch series |
| ISO 13415 | 航空航天 飛機結構用柱型單列密封的滾針滾道式滾子 英制系列 | Aerospace - Airframe needle track roller, stud type, single-row, sealed - Inch series |
| ISO 13416 | 航空航天 飛機結構用軛型單列密封的滾針滾道式滾子 米制系列 | Aerospace - Airframe needle track roller, yoke type, single-row, sealed - Metric series |
| ISO 13417 | 航空航天 飛機結構用柱型單列密封的滾針滾道式滾子 米制系列 | Aerospace - Airframe needle track roller, stud type, single-row, sealed - Metric series |
| ISO 13589 | 航空航天.等級:1100 MPa(環境溫度)/425℃、1100 MPa(環境溫度)/650℃、1210 MPa(環境溫度)/425℃、1210 MPa | Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/425 °C and 1550 MPa (at ambient temperature)/600° C - Dimensions |
| ISO 13595 | 航空航天 涂覆或未涂覆、金屬材料制、帶MJ螺紋游動自鎖螺母的螺紋襯套 尺寸 | Aerospace - Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions |
| ISO 13596 | 航空航天 涂覆或未涂覆、金屬材料制、帶MJ螺紋的封閉型自鎖螺紋襯套 尺寸 | Aerospace - Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions |
| ISO 13597 | 航空航天 涂覆或未涂覆、金屬材料制、帶MJ螺紋的開放型自鎖螺紋襯套 尺寸 | Aerospace - Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions |
| ISO 13598 | 航空航天 涂覆或未涂覆、金屬材料制、縮減法蘭、帶MJ螺紋的封閉型自鎖螺紋襯套 尺寸 | Aerospace - Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions |
| ISO 13599 | 航空航天 涂覆或未涂覆、金屬材料制、帶間隙配合孔的螺紋襯套 尺寸 | Aerospace - Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions |
| ISO 13921 | 航空航天.金屬材料制涂覆或未涂覆的、強度等級小于或等于1100 MPa、具有大徑桿型、短的和中等長度MJ螺紋、 | Aerospace - Screws, 100° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| ISO 14190 | 航空航天 飛機結構用滾動軸承:滾珠和球面滾子軸承 技術規范 | Aerospace - Airframe rolling bearings: Ball and spherical roller bearings - Technical specification |
| ISO 14191 | 航空航天 飛機結構用直徑系列3和4的單列自位球面滾子軸承 米制系列 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, diameter series 3 and 4 - Metric series |
| ISO 14192 | 航空航天 飛機結構用單列自位中等負荷防塵球面滾子軸承 米制系列 | Aerospace - Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty - Metric series |
| ISO 14193 | 航空航天 飛機結構用中等負荷擴展內圈單列自位密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series |
| ISO 14194 | 航空航天 飛機結構用重負荷擴展內圈自位雙列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, extended inner ring, heavy duty - Inch series |
| ISO 14195 | 航空航天 飛機結構用輕負荷扭力管設計的自位雙列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, torque tube design, light duty - Inch series |
| ISO 14196 | 航空航天 飛機結構用重負荷普通內圈自位雙列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, plain inner ring, heavy duty - Inch series |
| ISO 14197 | 航空航天 飛機結構用中等負荷自位單列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, intermediate duty - Inch series |
| ISO 14201 | 航空航天 飛機結構用直徑系列2的自位雙列球軸承 米制系列 | Aerospace - Airframe ball bearings, double-row, self-aligning, diameter series 2 - Metric series |
| ISO 14202 | 航空航天 飛機結構用直徑系列0和2的單列剛性球軸承 米制系列 | Aerospace - Airframe ball bearings, single-row, rigid, diameter series 0 and 2 - Metric series |
| ISO 14203 | 航空航天 飛機結構用直徑系列8和9單列剛性球軸承 米制系列 | Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 - Metric series |
| ISO 14204 | 航空航天 飛機結構用直徑系列0的雙列剛性球軸承 米制系列 | Aerospace - Airframe ball bearings, double-row, rigid, diameter series 0 - Metric series |
| ISO 14206 | 航空航天 飛機結構用輕負荷單列剛性密封球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series |
| ISO 14207 | 航空航天 飛機結構用輕負荷密封精密單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light duty - Inch series |
| ISO 14208 | 航空航天 飛機結構用中等負荷密封單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty - Inch series |
| ISO 14209 | 航空航天 飛機結構用中等負荷密封精密單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series |
| ISO 14210 | 航空航天 飛機結構用扭力管設計的輕負荷密封單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty - Inch series |
| ISO 14211 | 航空航天 飛機結構用輕負荷扭力管設計的單列剛性密封精密球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty - Inch series |
| ISO 14212 | 航空航天 飛機結構用扭力管設計的超輕負荷密封單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty - Inch series |
| ISO 14213 | 航空航天 飛機結構用扭力管設計的超輕負荷密封精密單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra light duty - Inch series |
| ISO 14214 | 航空航天 飛機結構用重負荷密封雙列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series |
| ISO 14215 | 航空航天 飛機結構用重負荷密封精密雙列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty - Inch series |
| ISO 14216 | 航空航天 飛機結構用重負荷密封雙列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series |
| ISO 14217 | 航空航天 飛機結構用重負荷密封精密雙列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series |
| ISO 14218 | 航空航天 飛機結構用重負荷密封單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series |
| ISO 14219 | 航空航天 飛機結構用重負荷密封精密單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series |
| ISO 14220 | 航空航天 飛機結構用輕負荷密封單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series |
| ISO 14221 | 航空航天 飛機結構用輕負荷密封精密單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series |
| ISO 14275 | 航空航天.有條紋的內偏距十字交叉驅動器.米制系列 | Aerospace - Drives, internal, offset cruciform, ribbed - Metric series |
| ISO 14276 | 航空航天.內偏距十字交叉驅動器.米制系列 | Aerospace - Drives, internal, offset cruciform - Metric series |
| ISO 14277 | 航空航天.有條紋的內調整偏差十字形驅動器或無條紋驅動器.米制系列 | Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series |
| ISO 14278 | 航空航天.有條紋的內調整偏差十字形精確計量儀或無條紋驅動器.米制系列 | Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series |
| ISO 14279 | 航空航天.內十字形驅動器.米制系列 | Aerospace - Drives, internal, cruciform - Metric series |
| ISO 14280 | 航空航天.有條紋,內十字形驅動器或無條紋驅動器.米制系列 | Aerospace - Drivers, ribbed for internal cruciform ribbed or unribbed drives - Metric series |
| ISO 14281 | 航空航天.有條紋的內十字形精確計量儀或無條紋驅動器.米制系列 | Aerospace - Gauges for internal cruciform ribbed or unribbed drives - Metric series |
| ISO 14300-1 | 航天系統 程序管理 第1部分：程序結構 | Space systems - Programme management - Part 1: Structuring of a programme |
| ISO 14300-2 | 航天系統.程序管理.第2部分:產品保證程序 | Space systems - Programme management - Part 2: Product assurance |
| ISO 14302 | 航天系統.電磁兼容性要求 | Space systems - Electromagnetic compatibility requirements |
| ISO 14303 | 航天系統.運載火箭與航天器的接口 | Space systems - Launch-vehicle-to-spacecraft interfaces |
| ISO 14619 | 航天系統.空間實驗.一般要求 | Space systems - Space experiments - General requirements |
| ISO 14620-1 | 航天系統.安全要求.第1部分:系統安全 | Space systems - Safety requirements - Part 1: System safety |
| ISO 14620-2 | 航天系統 安全要求 第2部分:發射現場操作 | Space systems-- Safety requirments - Part 2: Launch site operations |
| ISO 14620-3 | 航天系統.安全要求 第3部分:飛行安全系統 | Space systems - Safety requirements - Part 3: Flight safety systems |
| ISO 14621-1 | 航天系統.電氣、電子和電氣機械(EEE)零件.第1部分:零件管理 | Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 1: Parts management |
| ISO 14621-2 | 航天系統.電氣、電子和機電元件.第2部分:控制程序要求 | Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 2: Control programme requirements |
| ISO 14622 | 航天系統 結構設計 載荷及其誘導環境 | Space systems - Structural design - Loads and induced environment |
| ISO 14623 | 航天系統.壓力容器及承壓結構.設計與操作 | Space systems - Pressure vessels and pressurized structures - Design and operation |
| ISO 14624-1 | 航天系統.材料的安全和兼容性.第1部分:材料向上易燃性的測定 | Space systems - Safety and compatibility of materials - Part 1: Determination of upward flammability of materials |
| ISO 14624-2 | 航天系統.材料的安全和兼容性.第2部分:電線絕緣和附屬材料易燃性的測定 | Space systems - Safety and compatibility of materials - Part 2: Determination of flammability of electrical-wire insulation and accessory materials |
| ISO 14624-3 | 航天系統.材料的安全性和兼容性.第3部分:材料和附屬物品產生的廢氣物測定 | Space systems - Safety and compatibility of materials - Part 3: Determination of offgassed products from materials and assembled articles |
| ISO 14624-4 | 航天系統.材料的安全和兼容性.第4部分:加壓氣態氧或富氧環境下材料向上易燃性的測定 | Space systems - Safety and compatibility of materials - Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments |
| ISO 14624-5 | 航天系統.材料的安全和兼容性.第5部分:航空航天推進器的系統/組件材料的活性測定 | Space systems - Safety and compatibility of materials - Part 5: Determination of reactivity of system/component materials with aerospace propellants |
| ISO 14624-6 | 航天系統.材料的安全和兼容性.第6部分:加工材料與航空航天流反應性測定 | Space systems - Safety and compatibility of materials - Part 6: Determination of reactivity of processing materials with aerospace fluids |
| ISO 14624-7 | 航天系統.材料的安全和兼容性.第7部分:航空航天流體對材料穿透率和滲透性的測定 | Space systems - Safety and compatibility of materials - Part 7: Determination of permeability and penetration of materials to aerospace fluids |
| ISO 1464 | 航空航天 三腳千斤頂 間隙尺寸 | Aerospace; Tripod jacks; Clearance dimensions |
| ISO 14711 | 航天系統.不載人運行的概念產品.定義和使用概念產品指南 | Space systems - Unmanned mission operations concepts - Guidelines for defining and accessing concept products |
| ISO 14721 | 航天數據和信息傳輸系統.開放式檔案信息系統.參考模式 | Space data and information transfer systems - Open archival information system - Reference model |
| ISO 14950 | 航天系統.不載人航天器的可操作性 | Space systems - Unmanned spacecraft operability |
| ISO 14951-1 | 航天系統 流體特性 第1部分:氧 | Space systems - Fluid characteristics - Part 1: Oxygen |
| ISO 14951-10 | 航天系統.流體特性.第10部分:水 | Space systems - Fluid characteristics - Part 10: Water |
| ISO 14951-11 | 航天系統 流體特性 第11部分:氨 | Space systems - Fluid characteristics - Part 11: Ammonia |
| ISO 14951-12 | 航天系統 流體特性 第12部分:二氧化碳 | Space systems - Fluid characteristics - Part 12: Carbon dioxide |
| ISO 14951-13 | 航天系統 流體特性 第13部分:供氣用空氣 | Space systems - Fluid characteristics - Part 13: Breathing air |
| ISO 14951-2 | 航天系統 流體特性 第2部分:氫推進劑 | Space systems - Fluid characteristics - Part 2: Hydrogen propellant |
| ISO 14951-3 Technical Corrigendum 1 | 航天系統 流體特性 第3部分:氮 技術勘誤1 | Space systems - Fluid characteristics - Part 3: Nitrogen; Technical Corrigendum 1 |
| ISO 14951-3 | 航天系統 流體特性 第3部分:氮 | Space systems - Fluid characteristics - Part 3: Nitrogen |
| ISO 14951-4 Technical Corrigendum 1 | 航天系統 流體特性 第4部分:氦 技術勘誤1 | Space systems - Fluid characteristics - Part 4: Helium; Technical Corrigendum 1 |
| ISO 14951-4 | 航天系統 流體特性 第4部分:氦 | Space systems - Fluid characteristics - Part 4: Helium |
| ISO 14951-5 Technical Corrigendum 1 | 航天系統.流體特性.第5部分:四氧化二氮推進劑.技術勘誤1 | Space systems - Fluid characteristics - Part 5: Nitrogen tetroxide propellant; Technical Corrigendum 1 |
| ISO 14951-5 | 航天系統 流體特性 第5部分:四氧化二氮推進劑 | Space systems - Fluid characteristics - Part 5: Nitrogen tetroxide propellant |
| ISO 14951-6 Technical Corrigendum 1 | 航天系統.流體特性.第6部分:一甲基肼推進劑.技術勘誤1 | Space systems - Fluid characteristics - Part 6: Monomethylhydrazine propellant; Technical Corrigendum 1 |
| ISO 14951-6 | 航天系統 流體特性 第6部分:一甲基肼推進劑 | Space systems - Fluid characteristics - Part 6: Monomethylhydrazine propellant |
| ISO 14951-7 Technical Corrigendum 1 | 航天系統.流體特性.第7部分:肼推進劑.技術勘誤1 | Space systems - Fluid characteristics - Part 7: Hydrazine propellant; Technical Corrigendum 1 |
| ISO 14951-7 | 航天系統 流體特性 第7部分:肼推進劑 | Space systems - Fluid characteristics - Part 7: Hydrazine propellant |
| ISO 14951-8 | 航天系統 流體特性 第8部分:煤油推進劑 | Space systems - Fluid characteristics - Part 8: Kerosene propellant |
| ISO 14951-9 Technical Corrigendum 1 | 航天系統 流體特性 第9部分:氬 技術勘誤1 | Space systems - Fluid characteristics - Part 9: Argon; Technical Corrigendum 1 |
| ISO 14951-9 | 航天系統 流體特性 第9部分:氬 | Space systems - Fluid characteristics - Part 9: Argon |
| ISO 14952-1 | 航天系統.流體系統的表面清潔度.第1部分:詞匯 | Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary |
| ISO 14952-2 | 航天系統.流體系統的表面清潔度.第2部分:清潔度等級 | Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness levels |
| ISO 14952-3 | 航天系統.流體系統的表面清潔度.第3部分:非揮發性殘余物和粒子濃度的測定用分析方法 | Space systems - Surface cleanliness of fluid systems - Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination |
| ISO 14952-4 | 航天系統.流體系統的表面清潔度.第4部分:初步清潔過程 | Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes |
| ISO 14952-5 | 航天系統.流體系統的表面清潔度.第5部分:干燥過程 | Space systems - Surface cleanliness of fluid systems - Part 5: Drying processes |
| ISO 14952-6 | 航天系統.流體系統的表面清潔度.第6部分:精細清潔過程 | Space systems - Surface cleanliness of fluid systems - Part 6: Precision-cleaning processes |
| ISO 14953 | 航天系統 結構設計 運載器的靜態鑒定試驗載荷量級的確定 | Space systems - Structural design - Determination of loading levels for static qualification testing of launch vehicles |
| ISO 15387 | 航天系統.單結太陽能電池.測量和校準規程 | Space systems - Single-junction solar cells - Measurements and calibration procedures |
| ISO 15389 AMD 1 | 航天系統.空中到地面的臨時管纜.修改件1:防止意外的交叉接合 | Space systems - Flight-to-ground umbilicals; Amendment 1: Prevention of accidental cross-connection |
| ISO 15389 Technical Corrigendum 1 | 航天系統.空中到地面的臨時管纜.技術勘誤1 | Space systems - Flight-to-ground umbilicals; Technical Corrigendum 1 |
| ISO 15390 | 航天環境(天然的和人工的).銀河宇宙射線模型 | Space environment (natural and artificial) - Galactic cosmic ray model |
| ISO 1540 | 航空航天.飛行器電氣系統的特性 | Aerospace - Characteristics of aircraft electrical systems |
| ISO 15859-1 | 航天系統.流動特性、取樣和試驗方法.第1部分:氧 | Space systems - Fluid characteristics, sampling and test methods - Part 1: Oxygen |
| ISO 15859-10 | 航天系統.流動特性、取樣和試驗方法.第10部分:水 | Space systems - Fluid characteristics, sampling and test methods - Part 10: Water |
| ISO 15859-11 | 航天系統.流動特性、取樣和試驗方法.第11部分:氨 | Space systems - Fluid characteristics, sampling and test methods - Part 11: Ammonia |
| ISO 15859-12 | 航天系統.流動特性、取樣和試驗方法.第12部分:二氧化碳 | Space systems - Fluid characteristics, sampling and test methods - Part 12: Carbon dioxide |
| ISO 15859-13 | 航天系統.流動特性、取樣和試驗方法.第13部分:呼吸用空氣 | Space systems - Fluid characteristics, sampling and test methods - Part 13: Breathing air |
| ISO 15859-2 | 航天系統.流動特性、取樣和試驗方法.第2部分:氫 | Space systems - Fluid characteristics, sampling and test methods - Part 2: Hydrogen |
| ISO 15859-3 | 航天系統.流動特性、取樣和試驗方法.第3部分:氮 | Space systems - Fluid characteristics, sampling and test methods - Part 3: Nitrogen |
| ISO 15859-4 | 航天系統.流動特性、取樣和試驗方法.第4部分:氦 | Space systems - Fluid characteristics, sampling and test methods - Part 4: Helium |
| ISO 15859-5 | 航天系統.流動特性、取樣和試驗方法.第5部分:四氧化氮推進劑 | Space systems - Fluid characteristics, sampling and test methods - Part 5: Nitrogen tetroxide propellants |
| ISO 15859-6 | 航天系統.流動特性、取樣和試驗方法.第6部分:一甲基肼推進劑 | Space systems - Fluid characteristics, sampling and test methods - Part 6: Monomethylhydrazine propellant |
| ISO 15859-7 | 航天系統.流動特性、取樣和試驗方法.第7部分:肼推進劑 | Space systems - Fluid characteristics, sampling and test methods - Part 7: Hydrazine propellant |
| ISO 15859-8 | 航天系統.流動特性、取樣和試驗方法.第8部分:煤油推進劑 | Space systems - Fluid characteristics, sampling and test methods - Part 8: Kerosine propellant |
| ISO 15859-9 | 航天系統.流動特性、取樣和試驗方法.第9部分:氬 | Space systems - Fluid characteristics, sampling and test methods - Part 9: Argon |
| ISO 15860 | 航天系統.氣體污染.現場試驗測量方法 | Space systems - Gas contamination - Measurement methods for field tests |
| ISO 15863 | 航天系統.航天飛機與運載工具間接口的控制文獻 | Space systems - Spacecraft-to-launch-vehicle interface control document |
| ISO 15865 | 航天系統.合格評定 | Space systems - Qualification assessment |
| ISO 15872 | 航空航天.UNJ螺紋.測量 | Aerospace - UNJ threads - Gauging |
| ISO 15889 | 航天數據和信息傳送系統.數據描述語言.EAST規范 | Space data and information transfer systems - Data description language - EAST specification |
| ISO 16031-1 | 航空航天液壓系統.英制系列O型密封圈:內直徑和橫截面,公差和尺寸認證編碼.第1部分:液壓系統近似公差 | Aerospace fluid systems - O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes - Part 1: Close tolerances for hydraulic systems |
| ISO 16031-2 | 航空航天流體系統.英制系列O型密封圈:內直徑和橫截面、公差和尺寸識別碼.第2部分:非液壓系統的標準公差 | Aerospace fluid systems - O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes - Part 2: Standard tolerances for non-hydraulic systems |
| ISO 16091 | 航天系統.統一的后勤支援 | Space systems - Integrated logistic support |
| ISO 16458 | 航天系統.不載人航天器運輸.一般要求 | Space systems - Unmanned spacecraft transportation - General requirements |
| ISO 17057 | 航空航天 實心鉚釘 試驗方法 | Aerospace - Rivets, solid - Test method |
| ISO 17401 | 航天系統.運載工具用航天飛行器接口要求文獻 | Space systems - Spacecraft interface requirements document for launch vehicle services |
| ISO 17666 | 航天系統.風險管理 | Space systems - Risk management |
| ISO 19933 | 航天系統.航天器發射環境試驗報告格式 | Space systems - Format for spacecraft launch environment test report |
| ISO 2020-1 | 航空航天 航空器操縱系統用預成形柔性鋼絲繩 第1部分:尺寸和負載能力 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 1: Dimensions and loads |
| ISO 2020-2 | 航空航天 航空器操縱系統用預成形柔性鋼絲繩 第2部分:技術規范 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 2: Technical specification |
| ISO 21347 | 航天系統.斷裂和損壞控制 | Space systems - Fracture and damage control |
| ISO 21348 | 航天環境(天然的和人造的).太陽輻照度的測定規程 | Space environment (natural and artificial) - Process for determining solar irradiances |
| ISO 21349 | 航天系統.規劃評定 | Space systems - Project reviews |
| ISO 21350 | 航天系統.現貨供應產品的利用 | Space systems - Off-the-shelf item utilization |
| ISO 21351 | 航天系統.功能和技術規范 | Space systems - Functional and technical specifications |
| ISO 21961 | 航天數據和信息傳輸系統.數據實體字典規范語言(DEDSL).抽象語句 | Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - Abstract syntax |
| ISO 21962 | 航天數據和信息傳輸系統.數據實體字典規范語言(DEDSL).PVL語法 | Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - PVL syntax |
| ISO 22072 | 航空航天.電動流體靜力傳動裝置(EHA).采購規范中定義的特性 | Aerospace - Electrohydrostatic actuator (EHA) - Characteristics to be defined in procurement specifications |
| ISO 22538-1 | 航天系統.氧氣安全.第1部分:氧氣系統及組件的設計 | Space systems - Oxygen safety - Part 1: Design of oxygen systems and components |
| ISO 22538-2 | 航天系統.氧氣安全.第2部分:氧氣系統及組件用金屬材料的選擇 | Space systems - Oxygen safety - Part 2: Selection of metallic materials for oxygen systems and components |
| ISO 22538-3 | 航天系統.氧氣安全.第3部分:氧氣系統及組件用非金屬材料的選擇 | Space systems - Oxygen safety - Part 3: Selection of non-metallic materials for oxygen systems and components |
| ISO 22538-4 | 航天系統.氧氣安全.第4部分:氧氣系統及組件的危險分析 | Space systems - Oxygen safety - Part 4: Hazards analyses for oxygen systems and components |
| ISO 22641 | 航天數據和信息傳送系統.TM(遙測技術)同步和信道編碼 | Space data and information transfer systems - TM (telemetry) synchronization and channel coding |
| ISO 22642 Technical Corrigendum 1 | 航天數據和信息傳輸系統.TC(遙測指令)同步和信道編碼.技術勘誤1 | Space data and information transfer systems - TC (telecommand) synchronization and channel coding; Technical Corrigendum 1 |
| ISO 22642 | 航天數據和信息傳送系統.TC(遙測指令)同步和信道編碼 | Space data and information transfer systems - TC (telecommand) synchronization and channel coding |
| ISO 22643 | 航天數據和信息傳送系統.數據實體字典規范語言(DEDSL).XML/DTD語句 | Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - XML/DTD Syntax |
| ISO 22644 | 航天數據和信息傳送系統.軌道數據文電 | Space data and information transfer systems - Orbit data messages |
| ISO 22645 | 航天數據和信息傳送系統.TM(遙測技術)航天數據鏈接協議 | Space data and information transfer systems - TM (telemetry) space data link protocol |
| ISO 22646 | 航天數據和信息傳送系統.航天數據包協議 | Space data and information transfer systems - Space packet protocol |
| ISO 22647 | 航天數據和信息傳輸系統.空間鏈路識別符 | Space data and information transfer systems - Space link identifiers |
| ISO 22663 | 航天數據和信息傳輸系統.接近1的空間鏈接協議.數據鏈路層 | Space data and information transfer systems - Proximity-1 space link protocol - Data link layer |
| ISO 22664 | 航天數據和信息傳送系統.TC(遙測指令)航天數據鏈接協議 | Space data and information transfer systems - TC (telecommand) space data link protocol |
| ISO 22666 | 航天數據和信息傳輸系統.AOS(高級軌道系統)航天數據連接協議 | Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol |
| ISO 22667 | 航天數據和信息傳送系統.通信操作過程-1 | Space data and information transfer systems - Communication operations Procedure-1 |
| ISO 22671 | 航天數據和信息傳送系統.空間鏈路擴展(SLE).向前通信鏈路傳送裝置(CLTU)業務 | Space data and information transfer systems - Space link extension (SLE) - Forward communications link transmission unit (CLTU) service |
| ISO 22672 | 航天數據和信息傳輸系統.空間鏈路擴展(SLE).正向空間數據包業務 | Space data and information transfer systems - Space link extension (SLE) - Forward space packet service |
| ISO 23038 | 航天系統.航天用太陽能電池.電子和質子輻射試驗法 | Space systems - Space solar cells - Electron and proton irradiation test methods |
| ISO 23933 | 航空航天.等級為135 °C/20.684 kPa (275 °F/3.000 psi) 和135 °C/21.000 kPa (275 °F/3.046 psi)的芳族 | Aerospace - Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 °C/20.684 kPa (275 °F/3.000 psi) and 135 °C/21.000 kPa (275 °F/3.046 psi) - Procurement specification |
| ISO 245 | 航空航天 鎖緊絲 直徑 | Aerospace - Lockwire - Diameters |
| ISO 2635 | 航空器.一般用途的飛機電纜和航空航天應用的導線.尺寸和特性 | Aircraft - Conductors for general purpose aircraft electrical cables and aerospace applications - Dimensions and characteristics |
| ISO 2964 | 航空航天 管材 外徑和管壁厚度 米制尺寸 | Aerospace; Tubing; Outside diameters and thicknesses; Metric dimensions |
| ISO 3161 | 航空航天 UNJ螺紋 一般要求和極限尺寸 | Aerospace - UNJ threads - General requirements and limit dimensions |
| ISO 3168 | 航空航天.等級為:1100MPa(環境溫度)/235℃、1100MPa(環境溫度/315℃和1100MPa(環境溫度)/425℃、帶有沉孔及 | Aerospace - Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3185 | 航空航天 強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型的普 | Aerospace; bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3186 | 航空航天 強度等級1250 MPa～1800 MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、大徑 | Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions |
| ISO 3191 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3193 Technical Corrigendum 1 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPA; dimensions; technical corrigendum 1 |
| ISO 3193 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3202 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、帶內偏高扭矩十字槽或不打滑扳動結 | Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| ISO 3203 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通雙 | Aerospace; bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3209 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3221 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3222 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3223 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3224 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3225 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 3230 | 航空航天.金屬制有或無表面處理的帶圓墩坑的正常100°沉頭實心鉚釘.尺寸 | Aerospace - Rivets, solid, 100 ° normal countersunk head with dome, metallic material, with or without surface treatment - Dimensions |
| ISO 3353-1 | 航空航天.引導和收尾螺紋.第1部分:滾壓外螺紋 | Aerospace - Lead and runout threads - Part 1: Rolled external threads |
| ISO 3353-2 | 航空航天.引導和收尾螺紋.第2部分:內螺紋 | Aerospace - Lead and runout threads - Part 2: Internal threads |
| ISO 4095 | 航空航天 十二角傳動 扳手結構 米制系列 | Aerospace - Bihexagonal drives - Wrenching configuration - Metric series |
| ISO 4147 | 航空航天.等級為:600 MPa(環境溫度)/120℃、600 MPa(環境溫度)/235℃、900 MPa(環境溫度)/425℃、1100 MPa( | Aerospace - Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 ° C, 1250 MPa (at ambient temperature)/235 ° C and 1550 MPa (at ambient temperature)/ 600° C - Dimensions |
| ISO 44 | 航空航天 手柄操縱的雙位(開/關)開關 操作方向 | Aerospace; Lever-operated, two-position, ON/OFF switches; Directions of operation |
| ISO 5843-1 | 航空航天器結構 同義術語表 第1部分:航空航天電氣設備 三種語言版 | Aerospace construction; List of equivalent terms; Part 1 : Aerospace electrical equipment Trilingual edition |
| ISO 5843-10 | 航空航天 同義術語表 第10部分:飛機結構 三種語言版 | Aerospace; list of equivalent terms; part 10: aircraft structure |
| ISO 5843-2 | 航空航天 同義術語表 第2部分:航空航天用鉚釘 三種語言版 | Aerospace; list of equivalent terms; part 2: aerospace rivets |
| ISO 5843-3 | 航空航天 同義術語表 第3部分:航空航天用螺栓和螺母 三種語言版 | Aerospace - List of equivalent terms - Part 3: Aerospace bolts and nuts |
| ISO 5843-4 | 航空航天 同義術語表 第4部分:飛行力學 三種語言版 | Aerospace; list of equivalent terms; part 4: flight dynamics |
| ISO 5843-5 | 航空航天 同義術語表 第5部分:航空器設備的環境條件和工作條件 三種語言版 | Aerospace; list of equivalent terms; part 5; environmental and operating conditions for aircraft equipment |
| ISO 5843-6 | 航空航天 同義術語表 第6部分:標準大氣 三種語言版 | Aerospace; List of equivalent terms; Part 6 : Standard atmosphere Trilingual edition |
| ISO 5843-8 | 航空航天 同義術語表 第8部分:航空器可靠性 三種語言版 | Aerospace; list of equivalent terms; part 8: aircraft reliability |
| ISO 5843-9 | 航空航天 同義術語表 第9部分:航空器 三種語言版 | Aerospace; list of equivalent terms; part 9: aircraft |
| ISO 5855-1 | 航空航天 MJ螺紋 第1部分:一般要求 | Aerospace - MJ threads - Part 1: General requirements |
| ISO 5855-2 | 航空航天 MJ螺紋 第2部分:螺栓和螺母螺紋的極限尺寸 | Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts |
| ISO 5855-3 | 航空航天 MJ螺紋 第3部分:液體系統管接頭螺紋系統的極限尺寸 | Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems |
| ISO 5856 | 航空航天 強度等級小于或等于1100 MPa、金屬材料制成、有涂層或無涂層、帶有中或短長度MJ螺紋、大徑桿型及 | Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 5857 | 航空航天 強度等級1250 MPa帶有MJ螺紋的合金鋼凸頭螺栓 采購規范 | Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification |
| ISO 5858 | 航空航天.最高工作溫度小于或等于425℃的自鎖螺母.采購規范 | Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C - Procurement specification |
| ISO 5859 | 航空航天 液壓氣動系統和組件原理圖用圖形符號 | Aerospace; graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| ISO 5878 ADD 1 | 航空航天用參考大氣 補充1 | Addendum 1 |
| ISO 5878 ADD 2 | 航空航天用參考大氣 補充2 | Reference atmospheres for aerospace use; addendum 2 |
| ISO 5878 AMD 1 | 航空航天用參考大氣 修改1 | Reference atmospheres for aerospace use; amendment 1 |
| ISO 5878 | 航空航天用參考大氣 | Reference atmospheres for aerospace use |
| ISO 5884 | 航空航天 流體系統和組件 液壓油液固體顆粒污染的系統取樣和測量方法 | Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 6771 | 航空航天.流體系統和部件.壓力和溫度分類 | Aerospace - Fluid systems and components - Pressure and temperature classifications |
| ISO 6772 | 航空航天 流體系統 液壓軟管、導管和接頭組件的沖擊試驗 | Aerospace; fluid systems; impulse testing of hydraulic hose, tubing and fitting assemblies |
| ISO 6773 | 航空航天 流體系統 管道及配件的熱沖擊試驗 | Aerospace - Fluid systems - Thermal shock testing of piping and fittings |
| ISO 7169 | 航空航天.液壓系統用24°錐形的、壓力范圍截至3000psi或21000kPa的可拆卸管接頭.采購規范(英制/米制) | Aerospace - Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3000 psi or 21000 kPa - Procurement specification, inch/metric |
| ISO 7258 | 航空航天用聚四氟乙烯(PTFE)管材 密度和相對密度的測定方法 | Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density |
| ISO 7314 | 航空航天.液壓系統.金屬軟管組件 | Aerospace - Fluid systems - Metal hose assemblies |
| ISO 7315 | 航空航天 液壓系統安裝用“P”形卡箍(環狀卡箍) 包容尺寸 | Aerospace; "P" clamps (loop clamps) for fluid systems; envelope dimensions |
| ISO 7319 | 航空航天.流體系統.24°錐孔米制管接頭的接口 | Aerospace; fluid systems; interface of 24° cone metric couplings |
| ISO 7320 | 航空航天 流體系統螺紋密封連接接頭 尺寸 | Aerospace; couplings, threaded and sealed, for fluid systems; dimensions |
| ISO 7332 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 7403 | 航空航天 花鍵傳動 扳手結構 米制系列 | Aerospace - Spline drives - Wrenching configuration - Metric series |
| ISO 7481 | 航空航天 最高工作溫度小于或等于425℃的自鎖螺母 試驗方法 | Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 °C - Test methods |
| ISO 7661 | 航空航天 流體系統 可軸向調準的管路安裝用夾塊 設計標準和合格鑒定試驗 米制系列 | Aerospace; Fluid systems; Clamp blocks for tube lines having axial alignment; Design standard and qualification testing; Metric series |
| ISO 7689 | 航空航天 強度等級1100 MPa、帶MJ螺紋的合金鋼螺栓 采購規范 | Aerospace; alloy steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 7913 | 航空航天 米制螺栓和螺釘?shù)男螤詈臀恢霉? | Aerospace - Bolts and screws, metric - Tolerances of form and position |
| ISO 7961 | 航空航天 螺栓 試驗方法 | Aerospace; bolts; test methods |
| ISO 7995 | 航空航天.涂覆或未涂覆自鎖式六角形MJ螺紋螺母.等級:1100MPa/235℃、1100MPa/315℃ 或1100MPa/425℃.尺寸 | Aerospace - Nuts, hexagonal, self-locking, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 8074 | 航空航天 奧氏體不銹鋼零件的表面處理 | Aerospace; Surface treatment of austenitic stainless steel parts |
| ISO 8075 | 航空航天 可淬硬的不銹鋼零件表面處理 | Aerospace; Surface treatment of hardenable stainless steel parts |
| ISO 8078 | 航空航天工藝 鋁合金的陽極化處理 無著色涂層的硫酸工藝規程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, undyed coating |
| ISO 8079 | 航空航天工藝 鋁合金的陽極化處理 帶著色涂層的硫酸工藝規程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, dyed coating |
| ISO 8080 | 航空航天 鈦和鈦合金的陽極化處理 硫酸工藝規程 | Aerospace; Anodic treatment of titanium and titanium alloys; Sulfuric acid process |
| ISO 8081 | 航空航天工藝 鋁合金的化學轉化涂鍍 一般用途 | Aerospace process; Chemical conversion coating for aluminium alloys; General purpose |
| ISO 8168 | 航空航天 強度等級為1100 MPa、帶MJ螺紋的耐腐蝕和耐熱鋼制螺栓 采購規范 | Aerospace; corrosion- and heat-resisting steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 8177 | 航空航天 流體系統用“Ω”形卡箍(鞍型卡箍) 尺寸 | Aerospace; Omega clamps (saddle clamps) for fluid systems; Dimensions |
| ISO 8278 | 航空航天 液壓式壓力補償變流量泵 一般要求 | Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements |
| ISO 8279 | 航空航天.等級為:600 MPa(環境溫度)/120℃、600 MPa(環境溫度)/235℃、900 MPa(環境溫度)/425℃、1100MPa( | Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/730 ° C, 1250 MPa (at ambient temperature)/235 ° C and 1550 MPa (at ambient temperature)/ 600° C - Dimensions |
| ISO 8280 | 航空航天 由金屬材料制成,經過或沒有經過表面處理的普通頭實心鉚釘 尺寸 | Aerospace; rivets, solid, universal head, metallic material, with or without surface treatment; dimensions |
| ISO 8399-1 | 航空航天 附件驅動和安裝法蘭(米制系列) 第1部分:設計準則 | Aerospace - Accessory drives and mounting flanges (Metric series) - Part 1: Design criteria |
| ISO 8399-2 | 航空航天 附件驅動和安裝法蘭(米制系列) 第2部分:尺寸 | Aerospace - Accessory drives and mounting flanges (Metric series) - Part 2: Dimensions |
| ISO 8479 | 航空航天 流體系統的“Q”形卡箍 尺寸 | Aerospace; "Q" clamps (centre-mounted clamps) for fluid systems; Dimensions |
| ISO 8538 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃、帶沉孔 | Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 8574 | 航空航天.液壓系統管路安裝.彎管的合格試驗 | Aerospace - Hydraulic system tubing - Qualification tests for bent tubes |
| ISO 8575 | 航空航天 流體系統 液壓系統管路安裝 | Aerospace; fluid systems; hydraulic system tubing |
| ISO 8591-1 | 航空航天 鍛鋁和鋁合金 檢驗、試驗和供貨要求 第1部分:一般要求 | Aerospace; wrought aluminium and aluminium alloys; inspection, testing and supply requirements; part 1: general requirements |
| ISO 8625-1 | 航空航天 流體系統 詞匯 第1部分:與壓力有關的通用術語和定義 兩種語言版 | Aerospace; fluid systems; vocabulary; part 1: general terms and definitions relating to pressure |
| ISO 8625-2 | 航空航天 流體系統 詞匯 第2部分:與流動有關的通用術語和定義 兩種語言版 | Aerospace; fluid systems; vocabulary; part 2: general terms and definitions relating to flow |
| ISO 8625-3 | 航空航天 流體系統 詞匯 第3部分:與溫度有關的通用術語和定義 兩種語言版 | Aerospace; fluid systems; vocabulary; part 3: general terms and definitions relating to temperature |
| ISO 8641 | 航空航天 最高工作溫度高于425℃的自鎖螺母 采購規范 | Aerospace; Self-locking nuts with maximum operating temperature greater than 425 degrees C; Procurement specification |
| ISO 8642 | 航空航天 最高工作溫度高于425℃的自鎖螺母 試驗方法 | Aerospace; Self-locking nuts with maximum operating temperature greater than 425 degrees C; Test methods |
| ISO 8775 | 航空航天 流體系統用氣氧充填接頭(新型) 尺寸(英制) | Aerospace; gaseous oxygen replenishment connection for use in fluid systems (new type); dimensions (inch series) |
| ISO 8788 | 航空航天 米制螺母 形狀和位置公差 | Aerospace - Nuts, metric - Tolerances of form and position |
| ISO 8913 | 航空航天.輕型聚四氟乙烯(PTFE)軟管組件.等級：400℉/3000psi(204℃/20684kPa)和204℃/21000 kPa(400℉/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3 000 psi (204 °C/20 684 kPa) and 204 °C/21 000 kPa (400 °F/3 046 psi) - Procurement specification |
| ISO 8940 | 航空航天.錨式自鎖密封自定位雙耳沉孔螺母.級別:900MPa/120℃,900MPa/175℃,C級和900MPa/235℃.尺寸 | Aerospace - Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/120 °C, 900 MPa (at ambient temperature)/175 °C and 900 MPa (at ambient temperature)/235 °C - Dimensions |
| ISO 9139 | 航空航天 普通或開槽螺母 采購規范 | Aerospace - Nuts, plain or slotted (castellated) - Procurement specification |
| ISO 9140 | 航空航天 普通或開槽螺母 試驗方法 | Aerospace - Nuts, plain or slotted (castellated) - Test methods |
| ISO 9152 | 航空航天 強度等級為1100 MPa的鈦合金MJ螺紋螺栓 采購規范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification |
| ISO 9154 | 航空航天 由強度等級為1550 MPa的耐熱鎳基合金制成的帶MJ螺紋的螺栓 采購規范 | Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification |
| ISO 9156 | 航空航天.等級為:1100 MPa(環境溫度)/235℃、1100 MPa(環境溫度)/315℃和1100 MPa(環境溫度)/425℃,帶沉孔 | Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| ISO 9157 | 航空航天.等級為:1100MPa(室溫下)/425℃、1100MPa(室溫下)/650℃、1210MPa(室溫下)/425℃、1210MPa(室溫下) | Aerospace - Nuts, spline-drive, self-locking, with MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/425°C and 1550 MPa (at ambient temperature)/600°C - Dimensions |
| ISO 9199 | 航空航天.等級為:1100 MPa(環境溫度)/425℃、1100 MPa(環境溫度)/650℃、1210 MPa(環境溫度)/425℃、1210 M | Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at ambient temperature)/235 °C, 1550 MPa (at ambient temperature)/425 °C and 1550 MPa (at ambient temperature)/ 600 °C - Dimensions |
| ISO 9206 | 航空航天 恒流量液壓馬達 一般規范 | Aerospace; constant displacement hydraulic motors; general specifications |
| ISO 9216 | 航空航天.滑輪用合金鋼和鍍鎘或耐腐蝕鋼和鈍化六角帶槽(齒形頭)螺母.尺寸和質量 | Aerospace - Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9217 | 航空航天.滑輪用合金鋼和鍍鎘或耐腐蝕鋼和鈍化帶埋頭孔的倒角墊圈.尺寸和質量 | Aerospace - Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9218 | 航空航天.滑輪用合金鋼和鍍鎘或耐腐蝕鋼和鈍化平墊圈.尺寸和質量 | Aerospace - Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9219 | 航空航天.滑輪用合金鋼和鍍鎘或鈦合金鋼、MoS<下標2>潤滑或耐腐蝕鋼和鈍化的緊公差柄、短螺紋薄六角頭螺栓. | Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9254 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通在 | Aerospace; bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9255 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、普通在 | Aerospace; bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9256 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、大六角 | Aerospace; bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9418 | 航空航天 鋁或鋁合金實心鉚釘 采購規范 | Aerospace - Rivets, solid, in aluminium or aluminium alloys - Procurement specification |
| ISO 9528 | 航空航天 等級為21000kPa/204℃標準型聚四氟乙烯(PTFE)軟管組件 采購規范 | Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/21 000 kPa - Procurement specification |
| ISO 9538 | 航空航天 液壓管路安裝接頭及管接頭 平面彎曲試驗 | Aerospace - Hydraulic tubing joints and fittings - Planar flexure test |
| ISO 9609 | 航空航天.等級為:450 MPa(環境溫度)/120℃、450 MPa(環境溫度)/235℃、600 MPa(環境溫度)/425℃、900 MPa( | Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPA (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/600 °C - Dimensions* |
| ISO 9618 | 航空航天.等級為:450 MPa(環境溫度)/120℃、450 MPa(環境溫度)/235℃、600 MPa(環境溫度)/425℃、900 MPa( | Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPA (at ambient temperature)/ 650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/600 °C - Dimensions |
| ISO 9634 | 航空航天 流體系統 塑料保護罩及管堵的尺寸 | Aerospace - Fluid systems - Dimensions of plastic protective caps and plugs |
| ISO 9679 | 航空航天.流體系統用夾具 | Aerospace - Clamps for fluid systems - Test methods |
| ISO 9736 | 航空航天 航空器操縱鋼絲繩的螺紋式鋼制有眼端 尺寸及載荷 | Aerospace - Eye-ends, in steel, threaded, for aircraft control wire rope - Dimensions and loads |
| ISO 9737 | 航空航天 航空器操縱鋼絲繩用鍛制耐腐蝕鋼有眼端 尺寸及載荷 | Aerospace - Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9738 | 航空航天 航空器操縱鋼絲繩的旋轉套筒 尺寸及載荷 | Aerospace - Turnbarrels, for aircraft control wire rope - Dimensions and loads |
| ISO 9747 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕鋼雙柄球端 尺寸及載荷 | Aerospace - Double-shank ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9748 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕鋼球端 尺寸及載荷 | Aerospace - Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9749 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕柱螺栓端 尺寸及載荷 | Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9757 | 航空航天 航空器操縱鋼絲繩旋轉套筒用螺紋式鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads |
| ISO 9758 | 航空航天 航空器操縱鋼絲繩用滾動軸承用螺紋式鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads |
| ISO 9759 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕鋼叉形端 尺寸及載荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9760 | 航空航天 航空器滾動軸承操縱鋼絲繩上的鍛制耐腐蝕鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
| ISO 9761 | 航空航天 航空器操縱鋼絲繩旋轉套筒用耐腐蝕鋼制鎖定夾 尺寸 | Aerospace - Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles - Dimensions |
| ISO 9762 | 航空航天 航空器操縱鋼絲繩組件 尺寸及端部配件組合 | Aerospace - Aircraft control wire rope assemblies - Dimensions and end-fitting combinations |
| ISO 9763 | 航空航天 航空器操縱鋼絲繩組件 技術規范 | Aerospace - Aircraft control wire rope assemblies - Technical specification |
| ISO 9938 | 航空航天 強度溫度等級為204℃/28000 kPa的聚四氟乙烯軟管組件 采購規范 | Aerospace - Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/28 000 kPa - Procurement specification |
| ISO 9939 | 航空航天 滑油的壓力加油接頭(新型) | Aerospace; pressure re-oiling connection (new type) |
| ISO/TR 10201 | 航空航天 電子儀表和系統的標準 | Aerospace - Standards for electronic instruments and systems |
| ISO/TR 12198 | 航空航天 實心鉚釘 材料 | Aerospace - Rivets, solid - Materials |
| ISO/TR 17400 | 航天系統.航天全套發射裝置、集成站和其他設備.通用測試指南 | Space systems - Space launch complexes, integration sites and other facilities - General testing guidelines |
| ISO/TR 23462 | 航天系統.航天規劃管理框架的定義指南 | Space systems - Guidelines to define the management framework for a space project |
| 編號 | 中文名稱 | 英文名稱 |