微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60336 Corrigendum 1 | 醫用電氣設備.醫療診斷用X射線管組件.焦點特性.勘誤1 | Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Characteristics of focal spots; Corrigendum 1 |
| IEC 60336 | 醫療電氣設備.醫療診斷用X射線管組件.焦點的特性 | Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Characteristics of focal spots |
| IEC 60601-1-3 | 醫用電氣設備 第1部分:安全通用要求 第3節:并列標準:診斷X射線設備輻射防護通用要求 | Medical electrical equipment - Part 1: General requirements for safety - 3. Collateral standard: General requirements for radiation protection in diagnostic X-ray equipment |
| IEC 60601-2-22 | 醫療電氣設備.第2-22部分:外科、整容、治療和診斷用激光設備基本安全和基本性能的特殊要求 | Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| IEC 60601-2-28 | 醫用電氣設備 第2-28部分:醫療診斷用X射線源組件和X射線管組件安全專用要求 | Medical electrical equipment; part 2: particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis |
| IEC 60601-2-33 AMD 1 | 醫用電氣設備.第2-33部分:醫療診斷用磁共振設備的安全專用要求.修改件1 | Medical electrical equipment - Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis; Amendment 1 |
| IEC 60601-2-33 Edition 2.1 | 醫用電氣設備.第2-33部分:醫療診斷用磁共振設備的安全專用要求 | Medical electrical equipment - Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis |
| IEC 60601-2-33 | 醫用電氣設備.第2-33部分:醫療診斷用磁共振設備安全的特殊要求 | Medical electrical equipment - Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis |
| IEC 60601-2-37 | 醫療電氣設備.第2-37部分:超聲波醫療診斷和監測設備的基本安全和基本性能用特殊要求 | Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
| IEC 60601-2-41 | 醫用電氣設備 第2-41部分:外科手術燈和診斷用燈的安全專用要求 | Medical electrical equipment - Part 2-41: Particular requirements for the safety of surgical luminaires and luminaires for diagnostic |
| IEC 60601-2-7 | 醫用電氣設備 第2-7部分:診斷X射線發生裝置的高壓發生器安全專用要求 | Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators |
| IEC 60613 | 醫用診斷旋轉陽極X射線管的電、熱和負載特性 | Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis |
| IEC 60627 | 診斷用X-射線成像設備 通用和大圖形防散射濾柵的特性 | Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids |
| IEC 60706-5 | 設備的可維護性.第5部分:易測性和診斷測試 | Maintainability of equipment - Part 5: Testability and diagnostic testing |
| IEC 60806 | 醫療診斷旋轉陽極X射線管最大對稱輻射場的測定 | Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis |
| IEC 61010-2-101 | 測量、控制和實驗室用電氣設備的安全要求.第2-101部分:實驗室診斷(IVD)醫療設備的特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
| IEC 61157 | 醫療診斷超聲波設備聲輸出的報告用標準方法 | Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment |
| IEC 61267 | 醫用診斷X射線設備.測定特性時使用的輻射條件 | Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characetristics |
| IEC 61326-2-6 Corrigendum 1 | 測量、控制和實驗室用電氣設備.電磁兼容性(EMC)要求.第2-6部分:特殊要求.體外診斷(IVD)醫療設備.技術勘誤1 | Electrical equipment for measurement, control and laboratory use, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In-vitro diagnostic (IVD) medical equipment; Corrigendum 1 |
| IEC 61326-2-6 | 測量、控制和實驗室用電氣設備.電磁兼容性要求.第2-6部分:特殊要求.實驗室條件下診斷（IVD)醫療設備 | Electrical equipment for measurement, control and laboratory use, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In-vitro diagnostic (IVD) medical equipment |
| IEC 61331-1 | 醫用診斷X射線輻射防護器具 第1部分:材料衰減性能的測定 | Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials |
| IEC 61331-2 | 醫用診斷X射線輻射防護器具 第2部分:防護玻璃板 | Protective devices against diagnostic medical X-radiation - Part 2: Protective glass plates |
| IEC 61331-3 | 醫用診斷X射線輻射防護器具 第3部分:防護服和性腺防護器具 | Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing and protective devices for gonads |
| IEC 61674 AMD 1 | 醫用電氣設備.用于X射線診斷成像中帶電離室和/或半導體探測器的劑量儀.修改件1 | Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging; Amendment 1 |
| IEC 61674 | 醫用電氣設備 用于X射線診斷成像中帶電離室和/或半導體探測器的劑量儀 | Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging |
| IEC 61676 | 醫用電氣設備.在放射診斷中X射線管電壓的無傷害性測量用劑量測定儀器 | Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology |
| IEC 62286 | 消費者電子產品和網絡用服務診斷接口.IEEE 1394的實施 | Service diagnostic interface for consumer electronics products and networks - Implementation for IEEE 1394 |
| IEC 62359 | 超聲波.聲場特性.測定與醫療診斷超聲場相關的熱和機械指數的試驗方法 | Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields |
| IEC 62394 | 消費者電子產品和網絡用服務診斷接口.ECHONET的實施 | Service diagnostic interface for consumer electronics products and networks - Implementation for ECHONET |
| IEC/TR 60854 | 超聲脈沖回聲診斷設備性能的測量方法 | Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment |
| IEC/TR 61010-3-101 | 測量、控制及實驗室用電氣設備的安全要求.第3-101部分:IEC 61010-2-101:2002的一致性鑒定報告.實驗室條件下 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-101: Conformity verification report for IEC 61010-2-101:2002; Particular requirements for in vitro diagnostic (IVD) medical equipment |
| IEC/TS 61895 | 超聲學 脈沖多普勒診斷裝置 確定性能的試驗規程 | Ultrasonics - Pulsed Doppler diagnostic systems - Test procedures to determine performance |
| IEC/TS 62306 | 超聲波學.野外特性.在診斷超聲波場內測定溫度上升的試驗目標 | Ultrasonics - Field characterisation - Test objects for determination temperature elevation in diagnostic ultrasonic fields |
| ISO 11992-4 Technical Corrigendum 1 | 道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第4部分:診斷.技術勘誤1 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics; Technical Corrigendum 1 |
| ISO 11992-4 | 道路車輛.牽引車和拖掛車之間電連接數字信息的交換.第4部分:診斷 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics |
| ISO 13372 | 機器的工況監測和診斷.詞匯 | Condition monitoring and diagnostics of machines - Vocabulary |
| ISO 13373-1 | 條件監測和機械診斷.振動條件監測.第1部分:一般程序 | Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures |
| ISO 13373-2 | 機器的工況監測和診斷.振動條件監測.第2部分:振動數據的處理、分析和表示 | Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data |
| ISO 13374-1 | 機械狀態的監測和診斷.數據處理、通信和表示.第1部分:一般指南 | Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1: General guidelines |
| ISO 13374-2 | 機器的工況監測和診斷.數據處理、通信和表示.第2部分:數據處理 | Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 2: Data processing |
| ISO 13379 | 機器的工況監控和診斷.數據說明和診斷技術通用指南 | Condition monitoring and diagnostics of machines - General guidelines on data interpretation and diagnostics techniques |
| ISO 13380 | 機器的條件監控和診斷.對使用性能參數的一般導則 | Condition monitoring and diagnostics of machines - General guidelines on using performance parameters |
| ISO 13381-1 | 機器的工況監測和診斷.預測.第1部分:一般指南 | Condition monitoring and diagnostics of machines - Prognostics - Part 1: General guidelines |
| ISO 14229-1 | 道路車輛.統一診斷設備(UDS).第1部分:規范和要求 | Road vehicles - Unified diagnostic services (UDS) - Part 1: Specification and requirements |
| ISO 14229 | 道路車輛.統一診斷設備(UDS).要求和規范 | Road vehicles - Unified diagnostic services (UDS) - Specification and requirements |
| ISO 14230-1 | 道路車輛 診斷系統 關鍵詞協議2000 第1部分:物理層 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 1: Physical layer |
| ISO 14230-2 | 道路車輛 診斷系統 關鍵詞協議2000 第2部分:數據鏈路層 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 2: Data link layer |
| ISO 14230-3 | 道路車輛 診斷系統 關鍵詞協議2000 第3部分:應用層 | Road vehicles - Diagnostic systems - Keyword protocol 2000 - Part 3: Application layer |
| ISO 14230-4 | 道路車輛 診斷系統 關鍵詞協議2000 第4部分:對與排放有關系統的要求 | Road vehicles - Diagnostic systems; Keyword protocol 2000 - Part 4: Requirements for emission-related systems |
| ISO 15031-1 | 道路車輛 車輛與發射相關診斷的外部設備之間的通信 第1部分：一般信息 | Road vehicles - Communication between vehicle and external equipment for emmissions-related diagnostics - Part 1: General information |
| ISO 15031-3 | 道路車輛.排放相關的診斷用車輛和外部設備之間的通信.第3部分:診斷連接器和相關電路的規范及使用 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits, specification and use |
| ISO 15031-4 | 道路車輛.排放相關的診斷用車輛和外部設備之間的通信.第4部分:外部試驗設備 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 4: External test equipment |
| ISO 15031-5 | 道路車輛.排放相關診斷用車輛和外部設備之間的通信.第5部分:排放相關的診斷服務 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services |
| ISO 15031-6 | 道路車輛.車輛與發射相關診斷用外部設備間的通信.第6部分:故障診斷編碼定義 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions |
| ISO 15031-7 | 道路車輛 車輛與發射相關診斷用外部設備間的通信 第7部分：數據鏈路的安全 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 7: Data link security |
| ISO 15171-1 | 用于流體傳動和一般用途的管接頭 診斷用液壓管接頭 第1部分:非壓力下連接的管接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure |
| ISO 15171-2 | 用于流體傳動和一般用途的管接頭 診斷用液壓管接頭 第2部分:帶M16×2螺紋端的壓力連接接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 × 2 end for connection under pressure |
| ISO 15193 | 實驗室條件下醫用診斷裝置.生物原始試樣中數量值的測量.參考測量法的說明 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures |
| ISO 15194 | 實驗室條件下醫用診斷裝置.生物原始試樣中數量值的測量.標準物質的描述 | In vitro diagnostic systems - Measurement of quantities in samples of biological origin - Description of reference materials |
| ISO 15197 | 體外診斷試驗系統.糖尿病癥管理中自測用血糖監測系統的要求 | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
| ISO 15198 | 臨床實驗室藥物.體外診斷醫療設備.由制造商證實的用戶質量控制程序 | Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of user quality control procedures by the manufacturer |
| ISO 15765-1 | 道路車輛.控制器區域網絡(CAN)診斷.第1部分:一般信息 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 1: General information |
| ISO 15765-2 | 道路車輛.控制器區域網絡(CAN)的診斷.第2部分:網絡層服務 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 2: Network layer services |
| ISO 15765-3 | 道路車輛.控制器區域網絡(CAN)的診斷.第3部分:統一標準診斷服務的實施 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 3: Implementation of unified diagnostic services (UDS on CAN) |
| ISO 15765-4 | 道路車輛.控制器區域網絡(CAN)診斷.第4部分:相關發射系統的要求 | Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 4: Requirements for emissions-related systems |
| ISO 16844-6 | 道路車輛.速度記錄器系統.第6部分:診斷 | Road vehicles - Tachograph systems - Part 6: Diagnostics |
| ISO 17359 | 機器的條件監控和診斷.總導則 | Condition monitoring and diagnostics of machines - General guidelines |
| ISO 17511 | 體外診斷醫療裝置.生物試樣的定量測量.校準儀和控制材料賦值的計量溯源性 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials |
| ISO 18153 | 體外診斷醫療裝置.生物樣品的定量測量.校準儀和控制材料所賦酶的催化濃度值的計量溯源性 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials |
| ISO 18436-1 Technical Corrigendum 1 | 機器的工況監測與診斷.人員的培訓與認證要求.第1部分:認證機構和認證過程的要求.技術勘誤1 | Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 1: Requirements for certifying bodies and the certification process, Technical Corrigendum 1 |
| ISO 18436-1 | 機器的工況監測與診斷.人員的培訓與認證要求.第1部分:認證機構和認證過程的要求 | Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 1: Requirements for certifying bodies and the certification process |
| ISO 18436-2 | 機器的情況監測與診斷.人員的培訓與確認要求.第2部分:振動情況的監測和診斷 | Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 2: Vibration condition monitoring and diagnostics |
| ISO 19001 | 實驗室診斷醫療設備.生物著色用實驗室診斷試劑生產廠商提供的信息 | In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| ISO 20776-1 | 臨床實驗室試驗和在玻璃試管內診斷試驗系統.傳染介質易傳染性試驗和抗菌易傳染性試驗裝置性能評估.第1部分: | Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobic bacteria involved in infectious diseases |
| ISO 20776-2 | 臨床實驗室測試和體外診斷試驗系統.傳染者的易感性測試和抗菌劑易感性試驗裝置的性能評估.第2部分:抗菌劑易 | Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 2: Evaluation of performance of antimicrobial susceptibility test devices |
| ISO 22096 | 機器條件控制和診斷.聲音發射 | Condition monitoring and diagnostics of machines - Acoustic emission |
| ISO 7639 | 道路車輛 診斷系統 圖形符號 兩種語言版 | Road vehicles; Diagnostic systems; Graphical symbols Bilingual edition |
| ISO 8093 | 道路車輛 電子系統的故障診斷試驗 | Road vehicles; Diagnostic testing of electronic systems |
| ISO 9141 | 道路車輛 診斷系統 對數字信息交換的要求 | Road vehicles - Diagnostic systems - Requirements for interchange of digital information |
| ISO 9141-2 AMD 1 | 道路車輛 診斷系統 第2部分:交換數字信息的 CARB 要求 修改1 | Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information; Amendment 1 |
| ISO 9141-2 | 道路車輛 診斷系統 第2部分:交換數字信息的 CARB 要求 | Road vehicles; diagnostic systems; part 2: CARB requirements for interchange of digital information |
| ISO 9141-3 | 道路車輛 診斷系統 第3部分:車輛和OBDⅡ掃描工具之間通信的檢驗 | Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool |
| ISO/IEC 10164-14 Technical Corrigendum 1 | 信息技術.開放系統互連.系統管理:可信性和診斷測試分類.技術勘誤1 | Information technology - Open Systems Interconnection - Systems Management: Confidence and diagnostic test categories; Technical Corrigendum 1 |
| ISO/IEC 10164-14 Technical Corrigendum 2 | 信息技術.開放系統互連.系統管理:確信和診斷試驗類別.技術勘誤2 | Information technology - Open Systems Interconnection - Systems Management: Confidence and diagnostic test categories; Technical Corrigendum 2 |
| ISO/IEC 10164-14 Technical Corrigendum 3 | 信息技術.開放系統互連.系統管理:確信和診斷試驗類別.技術勘誤3 | Information technology - Open Systems Interconnection - Systems Management: Confidence and diagnostic test categories; Technical Corrigendum 3 |
| ISO/IEC 10164-14 | 信息技術 開放系統互連 系統管理:可信性和診斷測試分類 技術勘誤1 | Information technology - Open Systems Interconnection - System Management: Confidence and diagnostic test categories - Technical Corrigendum 1 |
| ISO/PAS 27145-1 | 道路車輛.實施全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求.第1部分:總說明和應用定義 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 1: General information and use case definition |
| ISO/PAS 27145-4 | 道路車輛.實施全球統一的道路車輛車載診斷系統技術法規(WWH－OBD)通訊要求.第4部分:車輛和試驗設備間連接 | Road vehicles - Implementation of WWH-OBD communication requirements - Part 4: Connection between vehicle and test equipment |
| ISO/TR 15031-2 | 道路車輛.與排放相關的診斷用車輛和外部設備間的通信.第2部分:術語、定義、縮略語和縮語 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Terms, definitions, abbreviations and acronyms |
| ISO/TR 18112 | 臨床實驗室試驗和在實驗室條件下診斷試驗系統.在實驗室條件下診斷用的專用醫學設備.制造商提供信息的管理要 | Clinical laboratory testing and in vitro diagnostic test systems - In vitro diagnostic medical devices for professional use - Summary of regulatory requirements for information supplied by the manufacturer |
| 編號 | 中文名稱 | 英文名稱 |