微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10664 | 螺栓和螺釘用內板擰的六角花形 | Hexalobular internal driving feature for bolts and screws |
| ISO 11926-2 | 通用和液壓傳動用聯接件 帶ISO 725螺紋和O形圈密封的油口和螺紋端頭 第2部分:重型(S 系列)螺栓端頭 | Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends |
| ISO 11926-3 | 通用和液壓傳動用聯接件 帶ISO 725螺紋和O形圈密封的油口和螺紋端頭 第3部分:輕型(L 系列)螺栓端頭 | Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends |
| ISO 12149 | 螺栓連接閥蓋的通用鋼制截止閥 | Bolted bonnet steel globe valves for general-purpose applications |
| ISO 12258 | 航空航天 強度等級小于或等于1275MPa、金屬材料制成、有涂覆或未涂覆、具有長MJ螺紋及大徑或中徑桿型的雙六 | Aerospace - Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions |
| ISO 13918 | 焊接 電弧螺栓焊用螺栓和陶瓷箍套 | Welding - Studs and ceramic ferrules for arc stud welding |
| ISO 14555 | 焊接.金屬材料的電弧螺栓焊 | Welding - Arc stud welding of metallic materials |
| ISO 15071 Technical Corrigendum 1 | 六角法蘭面螺栓.小型系列.產品等級A級.技術勘誤1 | Hexagon bolts with flange - Small series - Product grade A; Technical Corrigendum 1 |
| ISO 15071 | 六角法蘭面螺栓 小系列 產品等級A級 | Hexagon bolts with flange - Small series - Product grade A |
| ISO 15072 Technical Corrigendum 1 | 米制細牙螺紋六角法蘭面螺栓.小型系列.產品等級A級.技術勘誤1 | Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A; Technical Corrigendum 1 |
| ISO 15072 | 米制細牙螺紋六角法蘭面螺栓 小系列 產品等級A級 | Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
| ISO 16030 AMD 1 | 氣壓傳動.連接.氣口和雙頭螺栓端.修改件1 | Pneumatic fluid power - Connections - Ports and stud ends; Amendment 1 |
| ISO 16030 | 氣壓傳動 連接 氣口和雙頭螺栓端 | Pmeumatic fluid power - Connections - Portsand and stud ends |
| ISO 1891 | 螺栓、螺釘、螺母和附件 名詞和術語 三種語言版 | Bolts, screws, nuts and accessories; terminology and nomenclature trilingual edition |
| ISO 2184 | 工業用腳輪.頂板尺寸.第1部分:有4個螺栓孔的長形頂板 | Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes |
| ISO 225 | 緊固件 螺栓、螺釘、螺柱和螺母 尺寸代號和標注 三種語言版 | Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition |
| ISO 262 | ISO一般用途米制螺紋 螺釘、螺栓和螺母的選用尺寸 | ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts |
| ISO 263 | ISO英制螺紋 直徑與螺距系列及螺釘、螺栓和螺母的選用系列 直徑范圍0.06英寸～6英寸 | ISO inch screw threads; General plan and selection for screws, bolts and nuts; Diameter range 0,06 to 6 in |
| ISO 273 | 緊固件 螺栓和螺釘用通孔 | Fasteners; Clearance holes for bolts and screws |
| ISO 299 | 機床工作臺 T形槽和相應螺栓 | Machine tool tables; T-slots and corresponding bolts |
| ISO 3185 | 航空航天 強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型的普 | Aerospace; bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3186 | 航空航天 強度等級1250 MPa～1800 MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、大徑 | Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions |
| ISO 3193 Technical Corrigendum 1 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPA; dimensions; technical corrigendum 1 |
| ISO 3193 | 航空航天 強度等級小于或等于1100 MPa、有涂層或無涂層、金屬材料制成、短的或中等長度MJ螺紋、大徑桿型普 | Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3203 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通雙 | Aerospace; bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 3506-1 | 耐腐蝕不銹鋼緊固件的機械性能 第1部分:螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs |
| ISO 4014 | 六角頭螺栓 產品等級A和B級 | Hexagon head bolts - Product grades A and B |
| ISO 4015 | 六角頭螺栓 產品等級B級 細桿:(桿徑近似等于中徑) | Hexagon head bolts; Product grade B; Reduced shank (Shank diameter = pitch diameter) |
| ISO 4016 | 六角頭螺栓 產品等級C級 | Hexagon head bolts - Product grade C |
| ISO 4162 | 六角法蘭面螺栓 小系列 | Hexagon flange bolts; small series |
| ISO 4759-1 | 緊固件公差 第1部分:螺栓、螺釘、螺栓和螺母 產品等級A、B和C級 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C |
| ISO 4759-3 | 緊固件公差 第3部分:螺栓、螺釘和螺母用平墊圈 產品等級為A和C級 | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C |
| ISO 5713 | 土壤耕作設備 土壤耕作部件的固定螺栓 | Equipment for working the soil; fixing bolts for soil working elements |
| ISO 5843-3 | 航空航天 同義術語表 第3部分:航空航天用螺栓和螺母 三種語言版 | Aerospace - List of equivalent terms - Part 3: Aerospace bolts and nuts |
| ISO 5855-2 | 航空航天 MJ螺紋 第2部分:螺栓和螺母螺紋的極限尺寸 | Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts |
| ISO 5857 | 航空航天 強度等級1250 MPa帶有MJ螺紋的合金鋼凸頭螺栓 采購規范 | Aerospace; alloy steel protruding head bolts with strength classification 1250 MPa and MJ threads; procurement specification |
| ISO 5894 | 船舶與海上技術 蓋子用螺栓固定的人孔 | Ships and marine technology - Manholes with bolted covers |
| ISO 6002 | 用螺栓連接閥蓋的鋼制閘閥 | Bolted bonnet steel gate valves |
| ISO 6157-1 | 緊固件 表面缺陷 第1部分:螺栓、螺釘和螺柱特殊要求 | Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements |
| ISO 6157-3 | 緊固件 表面缺陷 第3部分:螺栓、螺釘和螺柱特殊要求 | Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements |
| ISO 6164 | 液壓傳動.25MPa和40MPa(250 bar和400 bar)壓力下使用的四螺栓整體方法蘭 | Hydraulic fluid power; four-srew, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ISO 6305-4 | 鐵道部件 交貨技術條件 第4部分:魚尾板和緊固件用的非處理鋼螺母和螺栓及高強度螺母和螺栓 | Railway components; technical delivery requirements; part 4: untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings |
| ISO 7378 | 緊固件 螺栓、螺釘和螺柱 開口銷孔和金屬絲孔 | Fasteners; Bolts, screws and studs; Split pin holes and wire holes |
| ISO 7689 | 航空航天 強度等級1100 MPa、帶MJ螺紋的合金鋼螺栓 采購規范 | Aerospace; alloy steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 7852 | 土方機械 防松螺栓頭 形狀和尺寸(螺紋尺寸除外) | Earth-moving machinery; Plough bolt heads; Shapes and dimensions (excluding thread dimensions) |
| ISO 7913 | 航空航天 米制螺栓和螺釘?shù)男螤詈臀恢霉? | Aerospace - Bolts and screws, metric - Tolerances of form and position |
| ISO 7961 | 航空航天 螺栓 試驗方法 | Aerospace; bolts; test methods |
| ISO 8168 | 航空航天 強度等級為1100 MPa、帶MJ螺紋的耐腐蝕和耐熱鋼制螺栓 采購規范 | Aerospace; corrosion- and heat-resisting steel bolts with strength classification 1100 MPa and MJ threads; procurement specification |
| ISO 8678 | 小半圓頭低方頸螺栓B級 | Cup head square neck bolts with small head and short neck; product grade B |
| ISO 8765 | 米制細牙六角頭螺栓 產品等級A和B級 | Hexagon head bolts with metric fine pitch thread - Product grades A and B |
| ISO 8820-4 | 道路車輛.熔斷器.第4部分:陰性接觸(類型A)、螺栓接觸(類型B) 及其試驗夾具熔斷器 | Road vehicles - Fuse links - Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures |
| ISO 8820-6 | 道路車輛.熔斷器.第6部分:單螺栓連接熔斷器 | Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links |
| ISO 8839 | 緊固件機械性能 有色金屬制造的螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 885 | 普通螺栓和螺釘 米制系列 頭下圓角半徑 | General purpose bolts and screws - Metric series - Radii under the head |
| ISO 887 Technical Corrigendum 1 | 通用米制螺栓、螺釘和螺母用普通墊圈.一般示意圖.技術勘誤1 | Plain washers for metric bolts, screws and nuts for general purposes - General plan; Technical Corrigendum 1 |
| ISO 887 | 米制普通螺栓、螺釘和螺母用平墊圈 總方案 | Plain washers for metric bolts, screws and nuts for general purposes - General plan |
| ISO 888 | 螺栓、螺釘和螺柱 普通螺栓的公稱長度及螺紋長度 | Bolts, screws and studs; Nominal lengths, and thread lengths for general purpose bolts |
| ISO 898-1 | 碳鋼和鑄鋼制造的緊固件機械性能 第1部分:螺栓、螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs |
| ISO 898-7 | 緊固件機械性能 第7部分:螺栓與螺釘?shù)呐ぞ卦囼灪妥钚∨ぞ毓Q直徑1mm～10mm | Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm,ISO 9974-1:2000 |
| ISO 8992 | 緊固件.螺栓、螺釘、螺柱和螺母通用技術條件 | Fasteners - General requirements for bolts, screws, studs and nuts |
| ISO 9152 | 航空航天 強度等級為1100 MPa的鈦合金MJ螺紋螺栓 采購規范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification |
| ISO 9154 | 航空航天 由強度等級為1550 MPa的耐熱鎳基合金制成的帶MJ螺紋的螺栓 采購規范 | Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa - Procurement specification |
| ISO 9219 | 航空航天.滑輪用合金鋼和鍍鎘或鈦合金鋼、MoS<下標2>潤滑或耐腐蝕鋼和鈍化的緊公差柄、短螺紋薄六角頭螺栓. | Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses |
| ISO 9254 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、普通在 | Aerospace; bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9255 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準柄、短或中等長度MJ螺紋、普通在 | Aerospace; bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9256 | 航空航天.強度等級小于或等于1100MPa、有涂層或無涂層、金屬材料制成的標準直徑或中徑柄、長MJ螺紋、大六角 | Aerospace; bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions |
| ISO 9749 | 航空航天 航空器操縱鋼絲繩上的鍛制耐腐蝕柱螺栓端 尺寸及載荷 | Aerospace - Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope - Dimensions and loads |
| ISO 9974-1 | 通用和液壓傳動用聯接件 帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭 第1部分:螺紋氣門 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports |
| ISO 9974-2 | 通用和液壓傳動用聯接件 帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭 第2部分:彈性密封的雙頭螺 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 9974-3 | 通用和液壓傳動用聯接件 帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭 第3部分:金屬-金屬密封的 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 9974-4 | 通用和液壓傳動用聯接件.帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭.第4部分:內外六角氣門栓的 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| 編號 | 中文名稱 | 英文名稱 |