微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60204-32 | 機械的安全 機械的電氣設備 第32部分:起重機械的要求 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| ISO 10245-1 | 起重機 限制器和指示器 第1部分:總則 | Cranes - Limiting and indicating devices - Part 1: General |
| ISO 10245-2 | 起重機 限制器和指示器 第2部分:汽車起重機 | Cranes - Limiting and indicating devices - Part 2: Mobile cranes |
| ISO 10245-3 | 起重機 限制器和指示器 第3部分:塔式起重機 | Cranes - Limiting and indicating devices - Part 3: Tower cranes |
| ISO 10245-4 Technical Corrigendum 1 | 起重機.限制器和指示器.第4部分:動臂起重機.技術勘誤1 | Cranes - Limiting and indicating devices - Part 4: Jib cranes; Technical Corrigendum 1 |
| ISO 10245-4 | 起重機.限制器和指示器.第4部分:動臂起重機 | Cranes - Limiting and indicating devices - Part 4: Jib cranes |
| ISO 10245-5 | 起重機 限制器和指示器 第5部分:橋式和門式起重機 | Cranes - Limiting and indicating devices - Part 5: Overhead travelling and portal bridge cranes |
| ISO 10571 | 起重機和某些特殊機械用輪胎 | Tyres for mobile cranes and similar specialized machines |
| ISO 10972-1 | 起重機 機構要求 第1部分:總則 | Cranes - Requirements for mechanisms - Part 1: General |
| ISO 10972-3 | 起重機.機構要求.第3部分:塔式起重機 | Cranes - Requirements for mechanisms - Part 3: Tower cranes |
| ISO 10972-4 | 起重機.機構要求.第4部分:臂架式起重機 | Cranes - Requirements for mechanisms - Part 4: Jib cranes |
| ISO 10972-5 | 起重機.機械性能要求.第5部分:橋式和門座起重機 | Cranes - Requirements for mechanisms - Part 5: Bridge and gantry cranes |
| ISO 10973 | 起重機 備件手冊 | Cranes - Spare parts manual |
| ISO 11629 | 起重機.起重機及其組件質量的測量 | Cranes - Measurement of the mass of a crane and its components |
| ISO 11630 | 起重機 車輪位置的測量 | Cranes - Measurement of wheel alignment |
| ISO 11660-1 | 起重機 走道、扶手和護欄 第1部分:總則 | Cranes - Access, guards and restraints - Part 1: General |
| ISO 11660-2 | 起重機 走道、扶手和護欄 第2部分:流動式起重機 | Cranes - Access, guards and restraints - Part 2: Mobile cranes |
| ISO 11660-3 | 起重機 走道、扶手和護欄 第3部分:塔式起重機 | Cranes - Access, guards and restraints - Part 3: Tower cranes |
| ISO 11660-5 | 起重機 通道、扶手和護欄 第5部分：橋式和龍門起重機 | Cranes - Access, guards and restraints - Part 5: Bridge and gantry cranes |
| ISO 11661 | 流動式起重機 額定起重能力曲線 | Mobile cranes - Presentation of rated capacity charts |
| ISO 11662-1 | 流動式起重機 起重機性能參數測定 第1部分:卸載和工作半徑 | Mobile cranes - Experimental determination of crane performance - Part 1: Tipping loads and radii |
| ISO 11994 | 起重機 可用性 詞匯 三種語言版 | Cranes - Availability - Vocabulary |
| ISO 12210-1 | 起重機 工作和非工作狀態下的錨定裝置 第1部分:總則 | Cranes - Anchoring devices for in-service and out-of-service conditions - Part 1: General |
| ISO 12210-4 Technical Corrigendum 1 | 起重機 工作和非工作狀態下的錨定裝置 第4部分:臂架式起重機 技術勘誤1 | Cranes - Anchoring devices for in-service and out-of-service conditions - Part 4: Jib cranes; Technical Corrigemdum 1 |
| ISO 12210-4 | 起重機 工作和非工作狀態下的錨定裝置 第4部分:臂架式起重機 | Cranes - Anchoring devices for in-service and out-of-service conditions - Part 4: Jib cranes |
| ISO 12478-1 | 起重機 維護手冊 第1部分:總則 | Cranes - Maintenance manual - Part 1: General |
| ISO 12480-1 | 起重機 安全使用 第1部分:總則 | Cranes - Safe use - Part 1: General |
| ISO 12480-3 | 起重機.安全使用.第3部分:塔式起重機 | Cranes - Safe use - Part 3: Tower cranes |
| ISO 12480-4 | 起重機.安全使用.第4部分:動臂起重機 | Cranes - Safe use - Part 4: Jib cranes |
| ISO 12482-1 | 起重機 狀態監控 第1部分:總則 | Cranes - Condition monitoring - Part 1: General |
| ISO 12485 | 塔式起重機 穩定性要求 | Tower cranes - Stability requirements |
| ISO 12488-1 | 起重機.輪子和移動及橫動軌道的公差.第1部分:總則 | Cranes - Tolerances for wheels and travel and traversing tracks - Part 1: General |
| ISO 12488-4 | 起重機.輪子和移動及橫動軌道的公差.第4部分:動臂起重機 | Cranes - Tolerances for wheels and travel and traversing tracks - Part 4: Jib cranes |
| ISO 13200 | 起重機 安全標志和危險圖示 總則 | Cranes - Safety signs and hazard pictorials - General principles |
| ISO 13202 | 起重機.速度和時間參數的測量 | Cranes - Measurement of velocity and time parameters |
| ISO 14518 | 起重機.試驗荷載的要求 | Cranes - Requirements for test loads |
| ISO 15442 | 起重機.裝載機起重機的安全要求 | Cranes - Safety requirements for loader cranes |
| ISO 15513 | 起重機 對起重機司機(操作者)、吊裝工、信號員和顧問資格的要求 | Cranes - Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| ISO 16881-1 | 起重機.軌道輪和相關觸輪滑軌支撐結構的設計計算.第1部分:總則 | Cranes - Design calculation for rail wheels and associated trolley track supporting structure - Part 1: General |
| ISO 1834 | 起重用短環鏈 驗收總則 | Short link chain for lifting purposes - General conditions of acceptance |
| ISO 1835 | 起重用短環鏈 吊鏈等用M(4)級非校準鏈條 | Short link chain for lifting purposes; grade M (4), non-calibrated, for chain slings etc. |
| ISO 22986 | 起重機.硬挺度.橋式起重機和龍門起重機 | Cranes - Stiffness - Bridge and gantry cranes |
| ISO 2374 | 起重機械 基本型的最大起重量范圍 | Lifting appliances; Range of maximum capacities for basic models |
| ISO 23813 | 起重機.指定人員的培訓 | Cranes - Training of appointed persons |
| ISO 23815-1 | 起重機.維護.第1部分:總則 | Cranes - Maintenance - Part 1: General |
| ISO 23853 | 起重機.吊裝工和信號手的培訓 | Cranes - Training of slingers and signallers |
| ISO 2415 | 起重用鍛造卸扣.D形弓形卸扣 | Forged shackles for general lifting purposes - Dee shackles and bow shackles |
| ISO 3075 | 起重用短環鏈 吊鏈等用S(6)級非校準鏈條 | Short link chain for lifting purposes; grade S (6) non calibrated, for chain slings etc. |
| ISO 3076 | 起重用短環鏈 吊鏈等用T(8)級非校準鏈條 | Short link chain for lifting purposes; grade T (8), non-calibrated, for chain slings etc. |
| ISO 3077 | 起重用短環鏈 T級，（T、DAT和DT型），差動吊鏈 | Short-link chain for lifting purposes - Grade T, (types T, DAT and DT), fine-tolerance hoist chain |
| ISO 3266 | 一般起重用的吊環螺釘 | Eyebolts for general lifting purposes |
| ISO 4301-1 | 起重機和起重機械.分級.第1部分:總則 | Cranes and lifting appliances; Classification; Part 1 : General |
| ISO 4301-2 | 起重機械 分級 第2部分:流動式起重機 | Lifting appliances; Classification; Part 2 : Mobile cranes |
| ISO 4301-3 | 起重機 分級 第3部分:塔式起重機 | Cranes -- Classification -- Part 3: Tower crane |
| ISO 4301-4 | 起重機和相關設備 分級 第4部分:臂架式起重機 | Cranes and related equipment; classification; part 4: jib cranes |
| ISO 4301-5 | 起重機 分級 第5部分:橋式和門式起重機 | Cranes; classification; part 5: overhead travelling and portal bridge cranes |
| ISO 4302 | 起重機 風載荷估算 | Cranes; Wind load assessment |
| ISO 4304 | 除流動式和浮式起重機以外的起重機 穩定性一般要求 | Cranes other than mobile and floating cranes; General requirements for stability |
| ISO 4305 | 流動式起重機 穩定性的確定 | Mobile cranes; determination of stability |
| ISO 4306-2 | 起重機 詞匯 第2部分:流動式起重機 三種語言版 | Cranes - Vocabulary - Part 2: Mobile cranes |
| ISO 4306-3 | 起重機.詞匯.第3部分:塔式起重機 | Cranes - Vocabulary - Part 3: Tower cranes |
| ISO 4306-5 | 起重機.詞匯.第5部分:橋式起重機和龍門起重機 | Cranes - Vocabulary - Part 5: Bridge and gantry cranes |
| ISO 4308-1 | 起重機和提升設備.鋼絲繩的選用.第1部分:總則 | Cranes and lifting appliances - Selection of wire ropes - Part 1: General |
| ISO 4308-2 | 起重機和起重機械 鋼絲繩的選擇 第2部分:流動式起重機 利用系數 | Cranes and lifting appliances; selection of wire ropes; part 2: mobile cranes; coefficient of utilization |
| ISO 4309 | 起重機.金屬絲繩.保養、維修、安裝、檢查和報廢 | Cranes - Wire ropes - Care, maintenance, installation, examination and discard |
| ISO 4310 | 起重機 試驗規范和程序 | Cranes; Test code and procedures |
| ISO 4779 | M(4)級鏈條配用的鍛制環眼起重吊鉤 | Forged steel lifting hooks with point and eye for use with steel chains of grade M(4) |
| ISO 6965 | 航空器 裝吊航空貨運集裝箱和大件貨物的自行式龍門起重機 功能要求 | Aircraft; Self-propelled gantry for lifting air cargo containers and outsize cargoes; Functional requirements |
| ISO 7296-1 AMD 1 | 起重機 圖形符號 第1部分:總則 修改1 | Cranes - Graphic symbols - Part 1: General; Amendment 1 |
| ISO 7296-1 | 起重機 圖形符號 第1部分:總則 | Cranes; graphic symbols; part 1: general |
| ISO 7296-2 | 起重機 圖形符號 第2部分:流動式起重機 | Cranes - Graphical symbols - Part 2: Mobile cranes |
| ISO 7296-3 | 起重機.圖形符號.第3部分:塔式起重機 | Cranes - Graphical symbols - Part 3: Tower cranes |
| ISO 7363 | 起重機和起重機械 技術性能和驗收文件 | Cranes and lifting appliances; Technical characteristics and acceptance documents |
| ISO 7592 | 起重用鋼制圓環校準鏈 正確使用和維護導則 | Calibrated round steel link lifting chains; Guidelines to proper use and maintenance |
| ISO 7752-1 | 起重機械 控制裝置 布置形式和特性 第1部分:一般原則 | Lifting appliances; Controls; Layout and characteristics; Part 1 : General principles |
| ISO 7752-2 ADD 1 | 起重機械 控制裝置 布置形式和特性 (第2部分)流動式起重機的基本布置和要求 補充1 | Lifting appliances; controls; layout and characteristics; basic arrangement and requirements for mobile cranes; addendum 1 |
| ISO 7752-2 | 起重機械 控制裝置 布置形式和特性 第2部分:流動式起重機的基本布置和要求 | Lifting appliances; Controls; Layout and characteristics; Part 2 : Basic arrangement and requirements for mobile cranes |
| ISO 7752-3 | 起重機 控制裝置 布置形式和特性 第3部分:塔式起重機 | Cranes; controls; layout and characteristics; part 3: tower cranes |
| ISO 7752-4 | 起重機 控制裝置 布置形式和特性 第4部分:臂架式起重機 | Cranes; controls; layout and characteristics; part 4: jib cranes |
| ISO 7752-5 | 起重機械 控制裝置 布置形式和特性 第5部分:橋式和門式起重機 | Lifting appliances; Controls; Layout and characteristics; Part 5 : Overhead travelling cranes and portal bridge cranes |
| ISO 8087 | 流動式起重機 卷筒和滑輪尺寸 | Mobile cranes; Drum and sheave sizes |
| ISO 8431 | 造船 固定式旋臂起重機 雜貨裝卸用船上安裝型式 | Shipbuilding; fixed jib cranes; ship mounted type for general cargo handling |
| ISO 8566-1 | 起重機 司機室 第1部分:總則 | Cranes - cabins - part 1: General |
| ISO 8566-2 | 起重機 司機室 第2部分:流動式起重機 | Cranes - Cabins - Part 2: Mobile cranes |
| ISO 8566-3 | 起重機 司機室 第3部分:塔式起重機 | Cranes - cabins - part 3: Tower cranes |
| ISO 8566-4 | 起重機 司機室 第4部分:臂架式起重機 | Cranes - Cabins - Part 4: Jib cranes |
| ISO 8566-5 | 起重機 司機室 第5部分:橋式和門式起重機 | Cranes - cabins - part 5: Overhead travelling and portal bridge cranes |
| ISO 8686-1 | 起重機 載荷和載荷組合的設計原則 第1部分:總則 | Cranes; design principles for loads and load combinations; part 1: general |
| ISO 8686-2 | 起重機.載荷和載荷組合的設計原則.第2部分:汽車起重機 | Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes |
| ISO 8686-3 | 起重機 載荷和載荷組合的設計原則 第3部分:塔式起重機 | Cranes - Design principles for loads and load combinations - Part 3: Tower cranes |
| ISO 8686-4 | 起重機.載荷和載荷組合的設計原則.第5部分:動臂起重機 | Cranes - Design principles for loads and load combinations - Part 4: Jib cranes |
| ISO 8686-5 | 起重機 載荷和載荷組合的設計原則 第5部分:橋式和門式起重機 | Cranes; design principles for loads and load combinations; part 5: overhead travelling and portal bridge cranes |
| ISO 9373 | 起重機和相關設備 試驗中參數測量的精度要求 | Cranes and related equipment; accuracy requirements for measuring parameters during testing |
| ISO 9374-1 | 起重機 應提供的資料 第1部分:總則 | Cranes; information to be provided; part 1: general |
| ISO 9374-3 | 起重機.應提供的咨詢、定購、報價和供應信息.第3部分:塔式起重機 | Cranes - Information to be provided for enquiries, orders, offers and supply - Part 3: Tower cranes |
| ISO 9374-4 | 起重機 應提供的資料 第4部分:臂架式起重機 | Cranes; information to be provided; part 4: jib cranes |
| ISO 9374-5 | 起重機 應提供的資料 第5部分:橋式和門式起重機 | Cranes; information to be provided; part 5: overhead travelling cranes and portal bridge cranes |
| ISO 9926-1 | 起重機 司機培訓 第1部分:總則 | Cranes; training of drivers; part 1: general |
| ISO 9926-3 | 起重機.司機培訓.第3部分:塔式起重機 | Cranes - Training of drivers - Part 3: Tower cranes |
| ISO 9927-1 | 起重機 檢查 第1部分:總則 | Cranes - Inspections - Part 1: General |
| ISO 9927-3 | 起重機.檢查.第3部分:塔式起重機 | Cranes - Inspections - Part 3: Tower cranes |
| ISO 9928-1 | 起重機 起重機操作手冊 第1部分:總則 | Cranes; crane driving manual; part 1: general |
| ISO 9928-2 | 起重機.起重機操作手冊.第2部分:汽車起重機操作者 | Cranes - Crane driving manual - Part 2: Mobile crane operators |
| ISO 9942-1 | 起重機 信息標牌 第1部分:總則 | Cranes - Information labels - Part 1: General |
| ISO 9942-3 | 起重機 信息標牌 第3部分:塔式起重機 | Cranes - Information labels - Part 3: Tower cranes |
| ISO/TR 16880 | 起重機.橋式和龍門起重機.設計和建造要求和推薦的國際標準 | Cranes - Bridge and gantry cranes - International Standards for design and manufacturing requirements and recommendations |
| ISO/TR 19961 | 起重機.汽車起重機的安全規范 | Cranes - Safety code on mobile cranes |
| ISO/TR 25599 | 起重機.動臂起重機.設計、制造、使用和維修要求及建議的國際標準 | Cranes - Jib cranes - International Standards for design, manufacturing, use and maintenance requirements and recommendations |
| ISO/TR 27245 | 起重機.塔式起重機.設計、制造、使用和維修要求和推薦國際標準 | Cranes - Tower cranes - International Standards for design, manufacture, use and maintenance requirements and recommendations |
| ISO/TS 15696 | 起重機 等同術語表 三種語言版 | Cranes - List of equivalent termes |
| 編號 | 中文名稱 | 英文名稱 |