微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC/PAS 62182 Edition 1.0 | 可靠度檢驗之前的不密閉的表面安裝器件的預處理 | Preconditioning of nonhermetic surface mount devices prior to reliability testing |
| ISO 11124-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第1部分:一般介紹及分類 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11124-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第2部分:冷硬鑄鐵丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit |
| ISO 11124-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第3部分:高碳鑄鋼丸和砂 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit |
| ISO 11124-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第4部分:低碳鑄鋼丸 | Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot |
| ISO 11125-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第1部分:抽樣 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11125-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11125-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第3部分:硬度測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness |
| ISO 11125-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第4部分:表觀密度測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density |
| ISO 11125-5 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第5部分:缺陷顆粒的百分比和微結構的測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure |
| ISO 11125-6 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第6部分:外來雜質測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter |
| ISO 11125-7 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法 第7部分:含水量測定 | Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture |
| ISO 11126-1 Technical Corrigendum 1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1 |
| ISO 11126-1 Technical Corrigendum 2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 技術勘誤2 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2 |
| ISO 11126-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第1部分:總體介紹和分類 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification |
| ISO 11126-10 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第10部分:鐵鉛石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne |
| ISO 11126-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第3部分:銅精煉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag |
| ISO 11126-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第4部分:煤爐渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag |
| ISO 11126-5 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第5部分:鎳精煉渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag |
| ISO 11126-6 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第6部分:煉鐵爐渣 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag |
| ISO 11126-7 Technical Corrigendum 1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁 技術勘誤1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1 |
| ISO 11126-7 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第7部分:熔融氧化鋁 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide |
| ISO 11126-8 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第8部分:橄欖石砂 | Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand |
| ISO 11126-9 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求 第9部分:十字石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite |
| ISO 11127-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第1部分:抽樣 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling |
| ISO 11127-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第2部分:顆粒尺寸分布的測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution |
| ISO 11127-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第3部分:表觀密度測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density |
| ISO 11127-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第4部分:通過玻璃載片試驗評定硬度 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test |
| ISO 11127-5 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第5部分:含水量測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture |
| ISO 11127-6 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法 第6部分:通過測量電導率測定水溶性雜質 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement |
| ISO 11127-7 | 涂裝油漆和有關產品前鋼材預處理 非金屬噴沙清理磨料的試驗方法 第7部分:水溶性氯化物的測定 | Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides |
| ISO 11218 | 航空航天 液壓油液清潔度分級 | Aerospace; cleanliness classification for hydraulic fluids |
| ISO 11464 | 土壤質量.物理化學分析用樣品的預處理 | Soil quality - Pretreatment of samples for physico-chemical analysis |
| ISO 11998 | 色漆和清漆.測定涂層的耐濕性和清潔度 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings |
| ISO 12345 | 柴油發動機.燃料噴射設備的清潔度評定 | Diesel engines - Cleanliness assessment of fuel injection equipment |
| ISO 14507 | 土質.測定有機污物用試樣的預處理 | Soil quality - Pretreatment of samples for determination of organic contaminants |
| ISO 14952-1 | 航天系統.流體系統的表面清潔度.第1部分:詞匯 | Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary |
| ISO 14952-2 | 航天系統.流體系統的表面清潔度.第2部分:清潔度等級 | Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness levels |
| ISO 14952-3 | 航天系統.流體系統的表面清潔度.第3部分:非揮發性殘余物和粒子濃度的測定用分析方法 | Space systems - Surface cleanliness of fluid systems - Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination |
| ISO 14952-4 | 航天系統.流體系統的表面清潔度.第4部分:初步清潔過程 | Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes |
| ISO 14952-5 | 航天系統.流體系統的表面清潔度.第5部分:干燥過程 | Space systems - Surface cleanliness of fluid systems - Part 5: Drying processes |
| ISO 14952-6 | 航天系統.流體系統的表面清潔度.第6部分:精細清潔過程 | Space systems - Surface cleanliness of fluid systems - Part 6: Precision-cleaning processes |
| ISO 15388 | 空間系統.污染和清潔度控制 | Space systems - Contamination and cleanliness control |
| ISO 16720 | 土質.連續分析用試樣的凍干法預處理 | Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis |
| ISO 18413 | 液壓傳動.部件和元件的清潔度.與污物收集、分析和數據報告相關的檢驗文件和原則 | Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| ISO 6761 | 鋼管 焊接用管端和配件的預處理 | Steel tubes; Preparation of ends of tubes and fittings for welding |
| ISO 8501-1 Supplement | 涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分的補充信息:用不同磨料噴砂處理時鋼表面變 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives |
| ISO 8501-1 | 涂料和有關產品使用前鋼襯底的制備.表面清潔度的視覺評價.第1部分:未涂覆鋼襯底和已有覆層全部除去后鋼襯底 | Preparation of steel substrates before application of paints and related products; visual assessment of surface cleanliness; part 1: rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 8501-2 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分:局部去除原有涂層后鋼材的除銹等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8501-3 | 涂裝油漆和有關產品前鋼材的預處理.表面清潔度的目視評定.第3部分:焊接、切邊及其它表面缺陷區域的處理等級 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 8502-11 | 涂裝油漆和有關產品前鋼材預處理.表面清潔度的評定試驗.第11部分:水溶性硫酸鹽濁度測定的現場方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate |
| ISO 8502-12 | 使用涂料和相關產品之前鋼基質的制備.表面清潔度評定試驗.第12部分:滴定測定水溶鐵離子的現場試驗方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrrous ions |
| ISO 8502-2 | 涂覆油漆和相關產品前鋼材襯底的預處理.表面清潔度的評定試驗.第2部分:潔凈表面氯化物的測定 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces |
| ISO 8502-3 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第3部分:油漆前預處理后的鋼材表面上的灰塵評定(壓 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8502-4 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第4部分:油覆前凝露可能性的評定導則 | Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8502-5 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第5部分:涂裝前鋼材表面上氯化物測定(離子探測管法) | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
| ISO 8502-6 | 油漆和相關產品用前鋼材的預處理.表面清潔度的評定試驗.第6部分:提取分析用可溶性雜質.Bresle法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method |
| ISO 8502-8 | 涂裝油漆和有關產品前鋼材的預處理 表面清潔度評定試驗 第8部分：現場水分折射測定方法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture |
| ISO 8502-9 | 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第9部分:水溶性鹽的現場電導測定法 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 8503-1 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第1部分:磨料噴射清理表面粗糙度的ISO評定 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 8503-2 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分:磨料噴射清理表面的粗糙度定級方法 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure |
| ISO 8503-3 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第3部分:ISO表面輪廓比較儀的校準方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure |
| ISO 8503-4 | 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第4部分:ISO表面輪廓比較儀的校準方法和表 | Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure |
| ISO 8503-5 | 涂裝油漆和有關產品前鋼材預處理.噴射清理鋼材的表面粗糙度特性.第5部分:表面輪廓測定的復制帶法 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile |
| ISO 8504-1 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第1部分:總則 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles |
| ISO 8504-2 | 涂裝油漆和有關產品前鋼材預處理.表面預處理方法.第2部分:磨料噴射清理 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning |
| ISO 8504-3 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分:手工和動力工具清洗 | Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 9587 | 金屬和其他無機覆蓋層 鋼鐵為減少氫脆危險的預處理 | Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO/TR 10949 | 液壓傳動.元件清潔度.從生產到安裝的過程中元件清潔度的取得和控制指南 | Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| ISO/TR 15235 | 涂裝油漆和有關產品前鋼材的預處理 收集的有關溶水鹽污染水平的影響的信息 | Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination |
| ISO/TS 16431 | 液壓傳動.配件系統.清潔度的鑒定 | Hydraulic fluid power - Assembled systems - Verification of cleanliness |
| 編號 | 中文名稱 | 英文名稱 |