微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 1002 | 滾動軸承 飛機機架軸承 特性、外形尺寸、公差、額定靜載荷 | Rolling bearings; Airframe bearings; Characteristics, boundary dimensions, tolerances, static load ratings |
| ISO 10129 | 滑動軸承.軸承金屬的試驗.靜態條件下潤滑油的耐腐蝕性 | Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions |
| ISO 10285 | 套筒型循環球直線運動球軸承 米制 | Rolling bearings, linear motion, recirculating ball, sleeve type; metric series |
| ISO 10317 | 滾動軸承 公制圓錐滾子軸承 代號系統 | Rolling bearings; metric tapered roller bearings; designation system |
| ISO 104 | 滾動軸承.止推軸承. 外形尺寸.總體設計圖 | Rolling bearings - Thrust bearings - Boundary dimensions, general plan |
| ISO 10792-1 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第1部分:米制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series |
| ISO 10792-2 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series |
| ISO 10792-3 | 航空航天 飛機結構用不銹鋼自潤滑球面滑動軸承 第3部分:技術規范 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification |
| ISO 113 | 滾動軸承 軸承座 外形尺寸 | Rolling bearings - Plummer block housings - Boundary dimensions |
| ISO 1132-1 | 滾動軸承 公差 第1部分:術語和定義 三種語言版 | Rolling bearings - Tolerances - Part 1: Terms and definitions |
| ISO 1132-2 | 滾動軸承 公差 第2部分：測量和規量原則和方法 | Rolling bearings - Tolerances - Part 2: Measuring and gauging principles and methods |
| ISO 11687-1 | 滑動軸承 滑動軸承座 第1部分:支撐式 | Plain bearings - Pedestal plain bearings - Part 1: Pillow blocks |
| ISO 11687-2 | 滑動軸承 滑動軸承座 第2部分:單邊法蘭式 | Plain bearings - Pedestal plain bearings - Part 2: Side flange bearings |
| ISO 11687-3 | 滑動軸承 滑動軸承座 第3部分:中心法蘭式 | Plain bearings - Pedestal plain bearings - Part 3: Centre flange bearings |
| ISO 12043 | 滾動軸承 單列圓柱滾子軸承 平擋圈及套圈無檔邊端倒角尺寸 | Roller bearings - Single-row cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides |
| ISO 12044 | 滾動軸承 單列角接觸球軸承 外圈非推力端倒角尺寸 | Roller bearings - Single-row angular contact ball bearings - Chamfer dimensions for outer ring non-thrust side |
| ISO 1206 | 滾動軸承 滾針軸承,尺寸48、49和69系列 限制尺寸和誤差 | Rolling bearings - Needle roller bearings, dimension series 48, 49 und 69 - Boundary dimensions and tolerances |
| ISO 12128 | 滑動軸承 潤滑油孔、油槽和油穴 尺寸、類型、標記及其應用 | Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
| ISO 12129-1 | 滑動軸承 第1部分:配合 | Plain bearings - Part 1: Fits |
| ISO 12129-2 | 滑動軸承 第2部分:軸、法蘭和止推環的形位公差和表面粗糙度 | Plain bearings - Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars |
| ISO 12130-1 | 滑動軸承 靜態條件下液壓斜墊止推滑動軸承 第1部分：斜墊止推軸承的計算 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings |
| ISO 12130-2 | 滑動軸承 靜態條件下液壓斜墊止推滑動軸承 第2部分：斜墊止推軸承的功能 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings |
| ISO 12130-3 | 滑動軸承 靜態條件下液壓斜墊止推滑動軸承 第3部分：斜墊止推軸承計算用指導值 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings |
| ISO 12131-1 | 滑動軸承 穩態條件下液體動壓滑動止推墊軸承 第1部分：止推墊軸承的計算 | Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings |
| ISO 12131-2 | 滑動軸承 穩態條件下液體動壓滑動止推墊軸承 第2部分：止推墊軸承的計算功能 | Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings |
| ISO 12131-3 | 滑動軸承 穩態條件下液體動壓滑動止推墊軸承 第3部分：止推墊軸承的計算指導值 | Plain bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings |
| ISO 12132 | 滑動軸承 薄壁軸瓦的質量保證 設計中的失效形式和影響分析(FMEA) | Plain bearings - Quality assurance of thin-walled half bearings - Design FMEA |
| ISO 12167-1 | 滑動軸承 靜態條件下帶有排泄槽的液壓滑動軸頸軸承 第1部分：帶有排泄槽的潤滑油滑動軸頸軸承的計算 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12167-2 | 滑動軸承 靜態條件下帶有排泄槽的液壓滑動軸頸軸承 第2部分：帶有排泄槽的潤滑油滑動軸頸軸承的計算用特 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12168-1 | 滑動軸承 靜態條件下不帶排泄槽的液壓滑動軸頸軸承 第1部分：不帶排泄槽的潤滑油滑動軸頸軸承的計算 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 12168-2 | 滑動軸承 靜態條件下不帶排泄槽的液壓滑動軸頸軸承 第1部分：不帶排泄槽的潤滑油滑動軸頸軸承的計算用特 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 1224 | 滾動軸承 儀器精密軸承 | Rolling bearings; Instrument precision bearings |
| ISO 12240-1 | 關節軸承 第1部分:徑向球面滑動軸承 | Spherical plain bearings - Part 1: Radial spherical plain bearings |
| ISO 12240-2 | 關節軸承 第2部分:向心角接觸球面滑動軸承 | Spherical plain bearings - Part 2: Angular contact radial spherical plain bearings |
| ISO 12240-3 | 關節軸承 第3部分:推力球面滑動軸承 | Spherical plain bearings - Part 3: Thrust spherical plain bearings |
| ISO 12240-4 Technical Corrigendum 1 | 關節軸承 第4部分:桿端球面滑動軸承 技術勘誤1 | Spherical plain bearings - Part 4: Spherical plain bearing rod ends; Technical Corrigendum 1 |
| ISO 12240-4 | 關節軸承 第4部分:桿端球面滑動軸承 | Spherical plain bearings - Part 4: Spherical plain bearing rod ends |
| ISO 12301 Technical Corrigendum 1 | 滑動軸承 幾何特性和材料質量特性的質量控制技術和檢驗 技術勘誤表1 | Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics; Technical Corrigendum 1 |
| ISO 12301 | 滑動軸承 幾何特性和材料質量特性的質量控制技術和檢驗 | Plain bearings; quality control techniques and inspection of geometrical and material quality characteristics |
| ISO 12302 | 滑動軸承 質量特定 統計過程控制 | Plain bearings; quality characteristics; statistical process control (SPC) |
| ISO 12303 | 滑動軸承 質量特性 機器和加工能力的計算 | Plain bearings - Quality characteristics - Calculation of machine and process capabilities |
| ISO 12306 | 滑動軸承 薄壁軸瓦和薄壁軸套的壁厚測量 | Plain bearings; measurement of wall thickness of thin-walled half-bearings and thin-walled bushes |
| ISO 12307-1 | 滑動軸承 卷制軸套 第1部分:外徑的檢驗 | Plain bearings - Wrapped bushes - Part 1: Checking the outside diameter |
| ISO 12307-2 | 滑動軸承 卷制軸套檢驗 第2部分:內徑的檢驗 | Plain bearings - Checking of wrapped bushes - Part 2: Checking the inside diameter |
| ISO 12308 | 滑動軸承 質量保證 抽樣形式 定義、應用和檢驗 | Plain bearings; quality assurance; sample types; definitions, applications and testing |
| ISO 13012 Technical Corrigendum 1 | 套筒型循環球直線運動球軸承 附件 技術勘誤1 | Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories; Technical corrigendum 1 |
| ISO 13012 | 套筒型循環球直線運動球軸承 附件 | Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories |
| ISO 13411 | 航空航天 飛機結構用滾針、滾柱和滾道式滾子軸承 技術規范 | Aerospace - Airframe needle roller, cylindrical roller and track roller bearings - Technical specification |
| ISO 13414 | 航空航天 飛機結構用帶檔邊的單列滾針軸承 英制系列 | Aerospace - Airframe needle roller bearings, single-row, shielded - Inch series |
| ISO 13778 | 滑動軸承 薄壁軸瓦的質量保證 選配法獲得小間隙 | Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range |
| ISO 13846 | 塑料管道系統 熱塑性加壓塑料管道用端部負載軸承和非端部負載軸承的安裝和連接 在內水壓下長期密封的試驗方 | Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaklightness under internal water pressure |
| ISO 14190 | 航空航天 飛機結構用滾動軸承:滾珠和球面滾子軸承 技術規范 | Aerospace - Airframe rolling bearings: Ball and spherical roller bearings - Technical specification |
| ISO 14191 | 航空航天 飛機結構用直徑系列3和4的單列自位球面滾子軸承 米制系列 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, diameter series 3 and 4 - Metric series |
| ISO 14192 | 航空航天 飛機結構用單列自位中等負荷防塵球面滾子軸承 米制系列 | Aerospace - Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty - Metric series |
| ISO 14193 | 航空航天 飛機結構用中等負荷擴展內圈單列自位密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series |
| ISO 14194 | 航空航天 飛機結構用重負荷擴展內圈自位雙列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, extended inner ring, heavy duty - Inch series |
| ISO 14195 | 航空航天 飛機結構用輕負荷扭力管設計的自位雙列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, torque tube design, light duty - Inch series |
| ISO 14196 | 航空航天 飛機結構用重負荷普通內圈自位雙列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, plain inner ring, heavy duty - Inch series |
| ISO 14197 | 航空航天 飛機結構用中等負荷自位單列密封球面滾子軸承 英制系列 | Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, intermediate duty - Inch series |
| ISO 14201 | 航空航天 飛機結構用直徑系列2的自位雙列球軸承 米制系列 | Aerospace - Airframe ball bearings, double-row, self-aligning, diameter series 2 - Metric series |
| ISO 14202 | 航空航天 飛機結構用直徑系列0和2的單列剛性球軸承 米制系列 | Aerospace - Airframe ball bearings, single-row, rigid, diameter series 0 and 2 - Metric series |
| ISO 14203 | 航空航天 飛機結構用直徑系列8和9單列剛性球軸承 米制系列 | Aerospace - Airframe ball bearings, single-row, rigid, diameter series 8 and 9 - Metric series |
| ISO 14204 | 航空航天 飛機結構用直徑系列0的雙列剛性球軸承 米制系列 | Aerospace - Airframe ball bearings, double-row, rigid, diameter series 0 - Metric series |
| ISO 14206 | 航空航天 飛機結構用輕負荷單列剛性密封球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series |
| ISO 14207 | 航空航天 飛機結構用輕負荷密封精密單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light duty - Inch series |
| ISO 14208 | 航空航天 飛機結構用中等負荷密封單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty - Inch series |
| ISO 14209 | 航空航天 飛機結構用中等負荷密封精密單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series |
| ISO 14210 | 航空航天 飛機結構用扭力管設計的輕負荷密封單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty - Inch series |
| ISO 14211 | 航空航天 飛機結構用輕負荷扭力管設計的單列剛性密封精密球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty - Inch series |
| ISO 14212 | 航空航天 飛機結構用扭力管設計的超輕負荷密封單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty - Inch series |
| ISO 14213 | 航空航天 飛機結構用扭力管設計的超輕負荷密封精密單列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra light duty - Inch series |
| ISO 14214 | 航空航天 飛機結構用重負荷密封雙列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series |
| ISO 14215 | 航空航天 飛機結構用重負荷密封精密雙列剛性球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty - Inch series |
| ISO 14216 | 航空航天 飛機結構用重負荷密封雙列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series |
| ISO 14217 | 航空航天 飛機結構用重負荷密封精密雙列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series |
| ISO 14218 | 航空航天 飛機結構用重負荷密封單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series |
| ISO 14219 | 航空航天 飛機結構用重負荷密封精密單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series |
| ISO 14220 | 航空航天 飛機結構用輕負荷密封單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series |
| ISO 14221 | 航空航天 飛機結構用輕負荷密封精密單列自調心球軸承 英制系列 | Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series |
| ISO 14728-1 | 滾動軸承.線性運動滾動軸承.第1部分:動態負載額定值和額定壽命 | Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life |
| ISO 14728-2 | 滾動軸承.線性運動滾動軸承.第2部分:靜態負載額定值 | Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings |
| ISO 14839-1 | 機械振動.有主動磁性軸承的旋轉機械裝置.第1部分:詞匯 | Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearing - Part 1: Vocabulary |
| ISO 14839-2 | 機械振動.裝配有主動磁性軸承的旋轉機械裝置的振動.第2部分:振動評價 | Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings - Part 2: Evaluation of vibration |
| ISO 15 | 滾動軸承 向心軸承 外形尺寸總方案 | Rolling bearings - Radial bearings - Boundary dimensions, general plan |
| ISO 15241 | 滾動軸承 量值符號 | Rolling bearings - Symbols for quantities |
| ISO 15242-1 | 滾動軸承.振動測量方法.第1部分:基本原則 | Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals |
| ISO 15242-2 | 滾動軸承.振動測量方法.第2部分:帶圓柱芯和外表面的徑向滾珠軸承 | Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface |
| ISO 15243 | 滾動軸承.損傷和故障.術語、特性和成因 | Rolling bearings - Damage and failures - Terms, characteristics and causes |
| ISO 15312 | 滾動軸承.熱速率.計算和系數 | Rolling bearings - Thermal speed rating - Calculation and coefficients |
| ISO 16287 | 滑動軸承.熱塑性軸襯.尺寸和公差 | Plain bearings - Thermoplastic bushes - Dimensions and tolerances |
| ISO 199 | 滾動軸承.止推軸承.公差 | Rolling bearings - Thrust bearings - Tolerances |
| ISO 21107 | 滾動軸承和球面滑動軸承.電子介質用查尋結構.用屬性詞匯標識的特性和性能標準 | Rolling bearings and spherical plain bearings - Search structure for electronic media - Characteristics and performance criteria identified by attribute vocabulary |
| ISO 246 | 滾動軸承 圓柱滾子軸承斜擋圈 外形尺寸 | Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions |
| ISO 2795 | 滑動軸承 燒結軸套 尺寸和公差 | Plain bearings; sintered bushes; dimensions and tolerances |
| ISO 281 AMD 1 | 滾動軸承 額定動載荷和額定壽命 修改1 | Rolling bearings - Dynamic load ratings and rating life; Amendment 1 |
| ISO 281 AMD 2 | 滾動軸承 額定動載荷和額定壽命 修改2:壽命修正系數axyz | Rolling bearings - Dynamic load ratings and rating life; Amendment 2: Life modification factor a<(Index)xyz> |
| ISO 281 | 滾動軸承 額定動載荷和額定壽命 | Rolling bearings; dynamic load ratings and rating life |
| ISO 2982-1 | 滾動軸承 附件 第1部分:錐形襯套 | Rolling bearings - Accessories - Part 1: Tapered sleeves - Dimensions |
| ISO 2982-2 | 滾動軸承 附件 第2部分:鎖緊母和鎖緊裝置 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices; Dimensions |
| ISO 3030 | 滾動軸承 向心滾針和保持架組件 尺寸和公差 | Roller bearings - Radial needle roller and cage assemblies - Dimensions and tolerances |
| ISO 3031 | 滾動軸承 推力滾針和保持架組件、推力墊圈 外形尺寸和公差 | Rolling bearings - Thrust needle roller and cage assemblies, thrust washers - Boundary dimensions and tolerances |
| ISO 3096 Technical Corrigendum 1 | 滾動軸承 滾針 尺寸和公差 技術勘誤1 | Rolling bearings - Needle rollers - Dimensions and tolerances; Technical Corrigendum 1 |
| ISO 3096 | 滾動軸承 滾針 尺寸和公差 | Rolling bearings - Needle rollers - Dimensions and tolerances |
| ISO 3228 | 滾動軸承 外球面軸承鑄造和沖壓座 | Rolling bearings; cast and pressed housings for insert bearings |
| ISO 3245 | 滾動軸承 無內圈、沖壓外圈滾針軸承 外形尺寸和公差 | Rolling bearings - Needle roller bearings, drawn cup without inner rings - Boundary dimensions and tolerances |
| ISO 3290 | 滾動軸承 球 尺寸和公差 | Rolling bearings - Balls - Dimensions and tolerances |
| ISO 3547-1 | 滑動軸承 卷制軸套 第1部分:尺寸 | Plain bearings - Wrapped bushes - Part 1: Dimensions |
| ISO 3547-2 | 滑動軸承 卷制軸套 第2部分:外徑和內徑試驗數據 | Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameter |
| ISO 3547-3 | 滑動軸承 卷制軸套 第3部分:潤滑油孔、油槽和油穴 | Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations |
| ISO 3547-4 | 滑動軸承 卷制軸套 第4部分:材料 | Plain bearings - Wrapped bushes - Part 4: Materials |
| ISO 3548 | 滑動軸承 帶或不帶法蘭的薄壁軸瓦 公差、設計要素和試驗方法 | Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test |
| ISO 355 ADD 1 | 滾動軸承 公制圓錐滾子軸承 外形尺寸和系列代號 補充1 | Rolling bearings; metric tapered roller bearings; boundary dimensions and series designations; addendum 1 |
| ISO 355 ADD 2 | 滾動軸承 公制圓錐滾子軸承 外形尺寸和系列代號 補充2 | Rolling bearings; metric tapered roller bearings; boundary dimensions and series designations; addendum 2 |
| ISO 355 | 滾動軸承 公制圓錐滾子軸承 外形尺寸和系列代號 | Rolling bearings; Metric tapered roller bearings; Boundary dimensions and series designations |
| ISO 4378-1 | 滑動軸承 術語、定義和分類 第1部分:設計、軸承材料及其性能 三種語言版 | Plain bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties |
| ISO 4378-2 | 滑動軸承 術語、定義和分類 第2部分:摩擦和磨損 三種語言版 | Plain bearings; Terms, definitions and classification; Part 2 : Friction and wear Trilingual edition |
| ISO 4378-3 | 滑動軸承 術語、定義和分類 第3部分:潤滑 三種語言版 | Plain bearings; Terms, definitions and classification; Part 3 : Lubrication Trilingual edition |
| ISO 4378-4 | 滑動軸承 術語、定義和分類 第4部分:計算參數及其符號 三種語言版 | Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol |
| ISO 4379 | 滑動軸承.銅合金襯套 | Plain bearings; copper alloy bushes |
| ISO 4381 | 滑動軸承 多層滑動軸承用鉛錫鑄造合金 | Plain bearings - Lead and tin casting alloys for multilayer plain bearings |
| ISO 4382-1 | 滑動軸承 銅合金 第1部分:單層和多層厚壁滑動軸承用鑄造合金 | Plain bearings; copper alloys; part 1: cast copper alloys for solid and multilayer thick-walled plain bearings |
| ISO 4382-2 | 滑動軸承 銅合金 第2部分:單層滑動軸承用鍛造合金 | Plain bearings; copper alloys; part 2: wrought copper alloys for solid plain bearings |
| ISO 4383 | 滑動軸承 薄壁滑動軸承用金屬多層材料 | Plain bearings - Multilayer materials for thin-walled plain bearings |
| ISO 4384-1 | 滑動軸承 軸承合金的硬度試驗 第1部分:復合材料 | Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials |
| ISO 4384-2 | 滑動軸承 軸承合金的硬度試驗 第2部分:單層材料 | Plain bearings; Hardness testing of bearing metals; Part 2 : Solid materials |
| ISO 4385 | 滑動軸承 金屬軸承材料的抗壓試驗 | Plain bearings; Compression testing of metallic bearing materials |
| ISO 4386-1 | 滑動軸承 多層金屬滑動軸承 第1部分:結合強度超聲波無損檢驗 | Plain bearings; metallic multilayer plain bearings; part 1: non-destructive ultrasonic testing of bond |
| ISO 4386-2 | 滑動軸承 多層金屬滑動軸承 第2部分:厚度大于或等于2mm的軸承金屬層的結合強度破壞性試驗 | Plain bearings; Metallic multilayer plain bearings; Part 2 : destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm |
| ISO 4386-3 | 滑動軸承 多層金屬滑動軸承 第3部分:無損穿透檢測 | Plain bearings; metallic multilayer plain bearings; part 3: non-destructive penetrant testing |
| ISO 464 | 滾動軸承 帶定位止動環的向心軸承 尺寸和公差 | Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances |
| ISO 492 | 滾動軸承.徑向軸承.公差 | Rolling bearings - Radial bearings - Tolerances |
| ISO 5593 | 滾動軸承 詞匯 三種語言版 | Rolling bearings - Vocabulary |
| ISO 5753 | 滾動軸承 徑向游隙 | Rolling bearings; radial internal clearance |
| ISO 582 | 滾動軸承 倒角尺寸的最大值 | Rolling bearings - Chamfer dimensions - Maximum values |
| ISO 5949 | 工具鋼和軸承鋼 用標準圖譜法評定碳化物分布的顯微照相法 | Tool steels and bearing steels; Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 6279 | 滑動軸承.固體軸承用鋁合金 | Plain bearings - Aluminium alloys for solid bearings |
| ISO 6280 | 滑動軸承 厚壁多層軸承軸瓦的技術要求 | Plain bearings; Requirements on backings for thick-walled multilayer bearings |
| ISO 6282 | 滑動軸承 金屬薄壁軸瓦 0.01極限值的測定 | Plain bearings; metallic thin-walled half bearings; determination of the sigma 0,01<(hoch)*>-limit |
| ISO 6524 | 滑動軸承 薄壁軸瓦 周長檢驗 | Plain bearings; thin-walled half-bearings; checking of peripheral length |
| ISO 6525 | 滑動軸承 帶材環型止推墊圈 尺寸和公差 | Plain bearings; Ring type thrust washers made from strip; Dimensions and tolerances |
| ISO 6526 | 滑動軸承 沖壓雙金屬半圓止推墊圈 要素和公差 | Plain bearings; Pressed bimetallic half thrust washers; Features and tolerances |
| ISO 6691 | 滑動軸承用熱塑性聚合物 分類和名稱 | Thermoplastic polymers for plain bearings - Classification and designation |
| ISO 6743-2 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第2部分:F組(錠子軸承、軸承和離合器) | Lubricants, industrial oils and related products (class L); Classification; Part 2 : Family F (Spindle bearings, bearings and associated clutches) |
| ISO 6811 Technical Corrigendum 1 | 關節軸承 詞匯 技術勘誤1 三種語言版 | Spherical plain bearings - Vocabulary; Technical corrigendum 1 |
| ISO 6811 | 關節軸承 詞匯 三種語言版 | Spherical plain bearings - Vocabulary |
| ISO 683-17 | 熱處理鋼、合金鋼和易切鋼 第17部分:滾球和滾柱軸承鋼 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels |
| ISO 7063 | 滾動軸承.滾針軸承滾道滾針.邊界尺寸和公差 | Rolling bearings - Needle roller bearing track rollers - Boundary dimensions and tolerances |
| ISO 7146 | 滑動軸承 損壞和外觀變化的原因、特征和術語 | Plain bearings; terms, characteristics and causes of damage and changes in appearance |
| ISO 7148-1 | 滑動軸承 軸承材料摩擦特性試驗 第1部分:軸承材料試驗 | Plain bearings - Testing of the tribological behaviour of bearing materials - Part 1: Testing of bearing metals |
| ISO 7148-2 | 滑動軸承 軸承材料摩擦特性試驗 第2部分:聚合物基體軸承材料試驗 | Plain bearings - Testing of the tribological behaviour of bearing materials - Part 2: Testing of polymer-based bearing materials |
| ISO 76 | 滾動軸承.靜載荷額定值 | Rolling bearings - Static load ratings |
| ISO 7902-1 | 穩態條件下液壓滑動軸承 圓柱形軸承 第1部分:計算程序 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure |
| ISO 7902-2 | 穩態條件下液壓滑動軸承 圓柱形軸承 第2部分:計算程序用函數 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure |
| ISO 7902-3 | 穩態條件下液壓滑動軸承 圓柱形軸承 第3部分:可允許的運行參數值 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters |
| ISO 7904-1 | 滑動軸承 符號 第1部分:基本符號 | Plain bearings - Symbols - Part 1: Basic symbols |
| ISO 7904-2 | 滑動軸承 符號 第2部分:應用符號 | Plain bearings - Symbols - Part 2: Applications |
| ISO 7905-1 | 滑動軸承 軸瓦疲勞強度 第1部分:在液體動壓潤滑條件下試驗臺和使用中的滑動軸承 | Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication |
| ISO 7905-2 | 滑動軸承.軸承疲勞強度.第2部分:金屬軸程材料的液體樣品的試驗 | Plain bearings - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material |
| ISO 7905-3 | 滑動軸承.軸承疲勞強度.第3部分:金屬多層軸承材料在滑動帶上的試驗 | Plain bearings - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material |
| ISO 7905-4 | 滑動軸承.軸承疲勞強度.第3部分:多層金屬滑動軸承材料的軸瓦試驗 | Plain bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing material |
| ISO 7938 | 航空器 操縱鋼索系統滑輪用球軸承 尺寸和載荷 | Aircraft; Ball bearings for control cable pulleys; Dimensions and loads |
| ISO 7939 | 航空器 操縱鋼索系統用帶有球軸承的非金屬滑輪 尺寸和載荷 | Aircraft; non-metallic pulleys with ball bearings for control cables; dimensions and loads |
| ISO 8443 | 滾動軸承 凸緣外圈向心球軸承 凸緣尺寸 | Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions |
| ISO 8826-1 | 技術制圖 滾動軸承 第1部分:通用簡化畫法 | Technical drawings; rolling bearings; part 1: general simplified representation |
| ISO 8826-2 | 技術制圖 滾動軸承 第2部分:詳細簡化畫法 | Technical drawings - Rolling bearings - Part 2: Detailed simplified representation |
| ISO 9628 | 滾動軸承.嵌入軸承和偏心鎖緊軸承環.邊界尺寸和公差 | Rolling bearings - Insert bearings and eccentric locking collars - Boundary dimensions and tolerances |
| ISO 9758 | 航空航天 航空器操縱鋼絲繩用滾動軸承用螺紋式鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope - Dimensions and loads |
| ISO 9760 | 航空航天 航空器滾動軸承操縱鋼絲繩上的鍛制耐腐蝕鋼制叉形端 尺寸及載荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
| ISO/TR 6281 | 滑動軸承 液體動壓和混合潤滑條件下的臺架試驗 準則 | Plain bearings; testing under conditions of hydrodynamic and mixed lubrication in test rigs; guidelines |
| ISO/TS 16799 | 滾動軸承 額定動載荷和額定壽命 基本額定動載荷計算中的間斷點 | Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings |
| 編號 | 中文名稱 | 英文名稱 |