微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60264-1 | 繞組線的包裝 第1部分:圓繞組線容器 | Packaging of winding wires. Part 1 : Containers for round winding wires |
| IEC 60264-2-1 AMD 1 | 繞組線的包裝.第2-1部分:圓柱形筒裝交貨線盤.基本尺寸.修改件1 | Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools; Basic dimensions; Amendment 1 |
| IEC 60264-2-1 | 繞組線的包裝 第2部分:圓柱形筒裝交貨線盤 第1節:基本尺寸 | Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section one; basic dimensions |
| IEC 60264-2-2 AMD 1 | 繞組線的包裝.第2-2部分:圓柱形筒裝交貨線盤.熱塑性材料制可回收線盤規范.修改件1 | Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material; Amendment 1 |
| IEC 60264-2-2 | 繞組線的包裝 第2部分:圓柱形筒裝交貨線盤 第2節:熱塑性材料可回收線盤規范 | Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section 2: specification for returnable spools made from thermoplastic material |
| IEC 60264-2-3 AMD 1 | 繞組線的包裝.第2-3部分:圓柱形筒裝交貨線盤.熱塑性材料制不可回收線盤規范.修改件1 | Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material; Amendment 1 |
| IEC 60264-2-3 | 繞組線的包裝 第2部分:圓柱形筒裝交貨線盤 第3節:熱塑性材料不可回收線盤規范 | Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section 3: specification for non-returnable spools made from thermoplastic material |
| IEC 60264-3-1 AMD 1 | 繞組線的包裝.第3-1部分:圓錐形筒裝交貨線盤.基本尺寸.修改件1 | Packaging of winding wires - Part 3-1: Taper barrelled delivery spools; Basic dimensions; Amendment 1 |
| IEC 60264-3-1 | 繞組線的包裝 第3-1部分:圓錐形筒裝交貨線盤 基本尺寸 | Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions |
| IEC 60264-3-2 | 繞組線的包裝 第3-2部分:圓錐型筒裝交貨線盤 熱塑性材料可回收線盤規范 | Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials |
| IEC 60264-3-3 AMD 1 | 繞組線的包裝.第3-3部分:圓錐形筒裝交貨線盤.熱塑性材料制不可回收線盤規范.修改件1 | Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material; Amendment 1 |
| IEC 60264-3-3 | 繞組線的包裝 第3部分:圓錐形筒裝交貨線盤 第3節:熱塑性材料不可回收線盤規范 | Packaging of winding wires; part 3: taper barrelled delivery spools; section 3: specification for non-returnable spools made from thermoplastic material |
| IEC 60264-3-4 | 繞組線的包裝 第3-4部分:圓錐形筒裝交貨線盤 圓錐形筒裝交貨線盤容器的基本尺寸 | Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools |
| IEC 60264-3-5 | 繞組線的包裝 第3-5部分:圓錐形筒裝交貨線盤 熱塑性材料線盤線筒規范 | Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material |
| IEC 60264-4-1 | 繞組線的包裝 第4-1部分:試驗方法 熱塑性材料交貨線盤 | Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials |
| IEC 60264-4-2 AMD 1 | 繞組線的包裝.第4-2部分:試驗方法.熱塑性材料制錐形筒裝交貨線盤容器.修改件1 | Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools; Amendment 1 |
| IEC 60264-4-2 | 繞組線的包裝 第4部分:試驗方法 第2節:熱塑性材料錐形筒裝交貨線盤容器 | Packaging of winding wires; part 4: methods of test; section 2: containers made from thermoplastic material for taper barrelled delivery spools |
| IEC 60264-5-1 AMD 1 | 繞組線的包裝.第5-1部分:帶圓錐形側板的圓柱形筒裝交貨線盤.基本尺寸.修改件1 | Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges; Basic dimensions; Amendment 1 |
| IEC 60264-5-1 | 繞組線的包裝 第5-1部分:帶圓錐形側板的圓柱形筒裝交貨線盤 基本尺寸 | Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions |
| IEC 60264-5-2 | 繞組線的包裝 第5-2部分：帶圓錐形側板的圓柱形筒裝交貨線盤 墊塑材料制可回收線盤規范 | Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges; Specification for returnable spools made from thermoplastic material |
| IEC 60286-1 | 自動裝配用元件的包裝 第1部分:具有軸向引線的元件在連續編帶上的帶式包裝 | Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes |
| IEC 60286-2 AMD 1 | 自動裝配用元件的包裝.第2部分:具有單向引線的元件在連續編帶上的帶式包裝.修改件1 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes; Amendment 1 |
| IEC 60286-2 | 自動裝配用元件的包裝 第2部分:具有單向引線的元件在連續編帶上的帶式包裝 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
| IEC 60286-3 | 自動處理用元件的包裝.第3部分:表面裝配元件在連續傳送帶上的包裝 | Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes |
| IEC 60286-5 | 自動裝配用元件的包裝.第5部分:矩陣式料盤 | Packaging of components for automatic handling - Part 5: Matrix trays |
| IEC 60286-6 | 自動化處理用組件的包裝.第6部分:表面安裝組件的散裝箱包裝 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| IEC 60512-11-13 | 電子設備連接器.試驗和測量.第11-13部分:氣候試驗.試驗11n:無釬焊包裝連接的氣密性 | Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test 11n: Gas tightness, solderless wrapped connections |
| IEC 61076-4-108 | 電子設備連接器.第4-108部分:有質量評定的印制板連接器.符合IEC 60917-1的基本網格為2.5mm、有25mm模數間距 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| IEC 61193-2 | 質量評估系統.第2部分:電子元件和包裝件檢驗用抽樣檢驗方法的選擇和使用 | Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages |
| IEC 61834-4 | 錄音 用戶用(525-60、625-50、1125-60和1250-50系統)6.35mm磁帶的螺旋掃描數字視頻盒式錄音系統 第4部分:包 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents |
| IEC 62090 | 使用條形碼和二維符號的電子元器件用產品包裝標簽 | Product package labels for electronic components using bar code and two-dimensional symbologies |
| IEC 62137 | 環境和耐用試驗.區域陣列式包裝件表面安裝板的試驗方法FBGA、BGA、FLGA、LGA、SON和QFN | Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
| IEC 62148-1 | 光纖有源元件及器件.包裝和接口標準.第1部分:總則和指南 | Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance |
| IEC 62148-10 | 光纖有源元件及器件.包裝和接口標準.第10部分:SFF MU雙20針無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 10: SFF MU duplex 20-pin transceivers |
| IEC 62148-11 | 光纖有源元件及器件.包裝和接口標準.第11部分:14針調制器集成激光二極管發射機 | Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters |
| IEC 62148-12 | 纖維光學有源元件和器件.包裝和接口標準.第12部分:帶同軸RF連接器的激光傳輸器 | Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector |
| IEC 62148-2 Corrigendum 1 | 纖維光學有源元件和器件.包裝和接口標準.第2部分:SFF MT-RJ 10針無線電收發信機 | Fibre optic active components and devices - Package interface standards - Part 2: SFF MT-RJ 10-pin transceivers |
| IEC 62148-2 | 光纖有源元件及器件.包裝和接口標準.第2部分:SFF MT-RJ 10針無線電收發信機 | Fibre optic active components and devices - Package interface standards - Part 2: SFF MT-RJ 10-pin transceivers |
| IEC 62148-3 | 光纖有源元件及器件.包裝和接口標準.第3部分:SFF MT-RJ 20針無線電收發信機 | Fibre optic active components and devices - Package interface standards - Part 3: SFF MT-RJ 20-pin transceivers |
| IEC 62148-4 | 光纖有源元件及器件.包裝和接口標準.第4部分:PN1 9塑料光學無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 4: PN 1 × 9 plastic optical transceivers |
| IEC 62148-5 | 光纖有源元件及器件.包裝和接口標準.第5部分:SC 1光纖模數 | Fibre optic active components and devices - Package and interface standards - Part 5: SC 1×9 fibre optic modules |
| IEC 62148-6 | 纖維光學有源元件和器件.包裝和接口標準.第6部分:ATM-PON無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers |
| IEC 62148-7 | 光纖有源元件及器件.包裝和接口標準.第7部分:SFF LC 10針無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers |
| IEC 62148-8 | 光纖有源元件及器件.包裝和接口標準.第8部分:SFF LC 20針無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC 20-pin transceivers |
| IEC 62148-9 Corrigendum 1 | 纖維光學有源元件和器件.包裝和接口標準.第9部分:SFF MU雙工10針無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers |
| IEC 62148-9 | 光纖有源元件及器件.包裝和接口標準.第9部分:SFF MU雙10針無線電收發信機 | Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers |
| IEC/PAS 62169 Edition 1.0 | 處理、包裝、船用和潮濕/回流敏感表面固定裝置的標準 | Standard for handling, packing, shipping and use of moisture/reflow sensitive surface mount devices |
| IEC/PAS 62169 | 對濕敏/逆流敏表面安裝器件的處置、包裝、發貨和使用的標準 | Standard for handling, packing, shipping and use of moisture/reflow sensitive surface mount devices |
| IEC/TR 62258-3 | 半導體壓模產品.第3部分:搬運、包裝和儲存的良好實施規程建議 | Semiconductor die products - Part 3: Recommendations for good practice in handling, packing and storage |
| ISO 10303-210 | 工業自動化系統和集成 產品數據表示和交換 第210部分： 應用協議：電子安裝、互連和包裝設計 | Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design |
| ISO 10303-232 | 工業自動化系統和集成.產品數據表示和交換.第232部分:應用協議.技術數據包裝核心信息和交換 | Industrial automation systems and integration - Product data representation and exchange - Part 232: Application protocol: Technical data packaging core information and exchange |
| ISO 10310 | 神經外科植入物 可植入神經刺激器的標記和包裝 | Neurosurgical implants - Marking and packaging of implantable neural stimulators |
| ISO 10442 | 石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| ISO 10531 | 包裝 滿裝的運輸包裝 單元貨物穩定性試驗 | Packaging; complete, filled transport packages; stability testing of unit loads |
| ISO 11607-1 | 終端無菌醫學設備的包裝.第1部分:材料、消毒阻擋系統和包裝系統的要求 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 11607-2 | 終端無菌醫學設備的包裝.第2部分:組成、密封和裝配過程的確認要求 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 11683 | 包裝 觸摸危險標志 要求 | Packaging - Tactile warnings of danger - Requirements |
| ISO 11897 | 包裝 熱塑柔性薄膜袋 折邊處的撕裂擴展試驗 | Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds |
| ISO 12048 | 包裝 滿裝的運輸包裝 使用壓力試驗機的壓力試驗和堆積試驗 | Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester |
| ISO 1215 | 商品干燥原軟木、軟木栓皮碎料、軟木廢物和軟木殘渣 定義和包裝 | Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste; Definitions and packaging |
| ISO 1216 | 軟木板 分級 分類和包裝 | Corkwood in planks - Grading, classification and packing |
| ISO 12807 | 放射性物質安全運輸包裝的泄漏檢驗 | Safe transport of radioactive materials - Leakage testing on packages |
| ISO 13302 | 感官分析.由包裝引起的食品味道改變的評定方法 | Sensory analysis - Methods for assessing modifications to the flavours of foodstuffs due to packaging |
| ISO 13355 | 包裝 滿裝的運輸包裝和單元貨物 隨機垂直振動試驗 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
| ISO 13503-2 | 石油和天然氣工業.完井液和材料.第2部分:高壓水砂破裂法和礫石包裝作業用支撐劑性能測定 | Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations |
| ISO 13503-4 | 石油和天然氣工業.完井液和材料.第4部分:在靜態條件下測量外部碰擊和砂礫包裝液體泄露程序 | Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions |
| ISO 13631 | 石油和天然氣工業.包裝用往復式氣體壓縮機 | Petroleum and natural gas industries - Packaged reciprocating gas compressors |
| ISO 1434 | 成包天然橡膠 包裝量測定 | Natural rubber in bales - Amount of bale coating - Determination |
| ISO 14535 | 攝影 電子掃描儀及成像膠片和像紙卷的室光負載包裝 尺寸及有關要求 | Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements |
| ISO 14850-1 | 核能.廢棄物包裝件的活性測量.第1部分:帶公開幾何條件的整體模型中的高分辨率γ光譜測定法 | Nuclear energy - Waste-packages activity measurement - Part 1: High-resolution gamma spectrometry in integral mode with open geometry |
| ISO 14968 | 紙和紙板 辦公室用紙的切割尺寸 每個包裝中紙頁卷曲的測量 | Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets |
| ISO 15119 | 包裝.袋.已填充袋摩擦系數的測定 | Packaging - Sacks - Determination of the friction of filled sacks |
| ISO 15378 | 藥品的主要包裝材料.以優秀制造實踐為基準對ISO 9001:2000應用的特殊要求 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) |
| ISO 15394 | 包裝 航運、運輸和可接受標簽的兩維符號和條碼 | Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| ISO 15676 | 心血管外科植入物和人造器官.心肺分流術和體外膜肺氧合(ECMO)用一次性導管包裝的要求 | Cardiovascular implants and artificial organs - Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) |
| ISO 15750-1 | 包裝.鋼筒.第1部分:最小總?cè)萘繛?208 l, 210 l and 216.5 l的通口柱桶 | Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l |
| ISO 15750-2 | 包裝.鋼筒.第2部分:最小總?cè)萘繛?212 l, 216,5 l 和 230 l的密封蓋圓筒 | Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l |
| ISO 15750-3 | 包裝.鋼筒.第3部分:鋼桶用插入法蘭型密封系統 | Packaging - Steel drums - Part 3: Inserted flange-type closure systems |
| ISO 16101 | 包裝.危險貨物的運輸包裝.塑料兼容性試驗 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing |
| ISO 16103 | 包裝.危險物品的運輸包裝.再生塑料材料 | Packaging - Transport packaging for dangerous goods - Recycled plastics material |
| ISO 16104 | 包裝.危險物品的運輸包裝.試驗方法 | Packaging - Transport packaging for dangerous goods - Test methods |
| ISO 16106 | 包裝.危險貨品運輸包裝.危險貨物包裝、中間散貨容器(IBCs)和大型包裝.應用ISO 9001的指南 | Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 |
| ISO 16467 | 包裝.危險品用運輸包裝件.IBCs用試驗方法 | Packaging - Transport packages for dangerous goods - Test methods for IBCs |
| ISO 16883 | 包裝.危險物品運輸包裝件.大包裝試驗方法 | Packaging - Transport packages for dangerous goods - Test methods for large packagings |
| ISO 1749 | 航空器 彈性密封圈 包裝和識別 | Aircraft; Elastomeric sealing rings; Packaging and identification |
| ISO 1997 | 粒狀軟木和軟木粉 分類、性質和包裝 | Granulated cork and cork powder; classification, properties and packing |
| ISO 20299-1 | 橡膠包包裝用薄膜.第1部分:丁二烯橡膠(BR)和丁苯橡膠(SBR) | Film for wrapping rubber bales - Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) |
| ISO 20299-2 | 橡膠包包裝用薄膜.第2部分:天然橡膠 | Film for wrapping rubber bales - Part 2: Natural rubber |
| ISO 20848-1 | 包裝.塑料桶.第1部分:標稱容量113.6 L～220 L的可拆蓋圓桶 | Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l |
| ISO 20848-2 | 包裝.塑料桶.第2部分:標稱容量208.2 L～220 L的固定蓋(密封蓋)圓桶 | Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l |
| ISO 20848-3 | 包裝.塑料圓筒.第3部分:標稱容量113.6 L～220 L塑料圓桶的塞子/桶孔閉合系統 | Packaging - Plastics drums - Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l |
| ISO 21067 | 包裝.詞匯 | Packaging - Vocabulary |
| ISO 21898 | 包裝.非危險貨物用軟的過渡性散貨集裝箱 | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| ISO 2206 | 包裝 滿裝的運輸包裝 試驗時包裝件的標識 | Packaging; Complete, filled transport packages; Identification of parts when testing |
| ISO 2219 | 熱絕緣用的膨脹純集成軟木 特性、取樣和包裝 | Expanded pure agglomerated cork for thermal insulation; characteristics, sampling and packaging |
| ISO 2233 | 包裝 滿裝的運輸包裝和單元貨物 試驗條件 | Packaging - Complete, filled transport packages and unit loads - Conditioning for testing |
| ISO 2234 | 包裝 滿裝的運輸包裝和單元貨物 靜載荷法堆積試驗 | Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load |
| ISO 2244 | 包裝 滿裝的運輸包裝和單元貨物 水平?jīng)_擊試驗 | Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests |
| ISO 2247 | 包裝 滿裝的運輸包裝和單元貨物 固定低頻率振動試驗 | Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency |
| ISO 2248 | 包裝 滿裝的運輸包裝 墜落垂直沖擊試驗 | Packaging; Complete, filled transport packages; Vertical impact test by dropping |
| ISO 22715 | 化妝品.包裝和標簽 | Cosmetics - Packaging and labelling |
| ISO 22742 | 包裝.產品包裝用線形條碼和二維符號 | Packaging - Linear bar code and two-dimensional symbols for product packaging |
| ISO 23667 | 包裝.危險貨物的運輸包裝.硬質塑料和塑料合成的IBCs.兼容性測試 | Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing |
| ISO 2855 | 放射性物質 包裝 內容物和輻射泄漏檢驗 | Radioactive materials; Packagings; Test for contents leakage and radiation leakage |
| ISO 2873 | 包裝 滿裝的運輸包裝和單元貨物 低壓試驗 | Packaging - Complete, filled transport packages and unit loads - Low pressure test |
| ISO 2875 | 包裝 滿裝的運輸包裝和單元貨物 噴水試驗 | Packaging - Complete, filled transport packages and unit loads - Water-spray test |
| ISO 2876 | 包裝 滿裝的運輸包裝 滾動試驗 | Packaging; Complete, filled transport packages; Rolling test |
| ISO 3394 | 剛性的矩形包裝件尺寸 運輸包裝 | Dimensions of rigid rectangular packages; Transport packages |
| ISO 3676 | 包裝 單元貨物大小 尺寸 | Packaging; Unit load sizes; Dimensions |
| ISO 3863 | 圓柱形軟木塞 尺寸特性、取樣、包裝和標記 | Cylindrical cork stoppers; dimensional characteristics, sampling, packaging and marking |
| ISO 3869 | 復合軟木 膨脹連接填充料 規范、包裝和貼標志 | Composition cork - Expansion joint fillers - Specifications, packaging and marking |
| ISO 4178 | 滿裝的運輸包裝 分類檢驗 記錄的信息 | Complete, filled transport packages; Distribution trials; Information to be recorded |
| ISO 4180-1 | 滿裝的運輸包裝 性能試驗計劃編制的一般規則 第1部分:一般原則 | Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 1 : General principles |
| ISO 4180-2 | 滿裝的運輸包裝 性能試驗計劃編制的一般規則 第2部分:定量的數據 | Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 2 : Quantitative data |
| ISO 4472 | 針葉樹和闊葉樹鋸材 運輸包裝 | Coniferous and broadleaved sawn timber; Transportation packages |
| ISO 4709 | 復合軟木 襯墊材料 分級體系 要求、取樣、包裝和標記 | Composition cork - Gasket material - Classification system, requirements, sampling, packaging and marking |
| ISO 4714 | 復合軟木 規格、取樣、包裝和標記 | Composition cork - Specifications, sampling, packaging and marking |
| ISO 5989 | 攝影技術.鹵化銀照相材料沖洗用預包裝的化學藥品.詞匯 | Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary |
| ISO 6196-4 | 縮微攝影技術 詞匯 第4部分:材料和包裝 兩種語言版 | Micrographics - Vocabulary - Part 4: Materials and packaging |
| ISO 6590-1 | 包裝 袋 名詞和種類 第1部分:紙袋 三種語言版 | Packaging; Sacks; Vocabulary and types; Part 1 : Paper sacks Trilingual edition |
| ISO 6590-2 | 包裝 袋 名詞和種類 第2部分:熱塑柔性薄膜袋 三種語言版 | Packaging; Sacks; Vocabulary and types; Part 2 : Sacks made from thermoplastic flexible film Trilingual edition |
| ISO 6591-1 | 包裝 袋 說明及測量方法 第1部分:空紙袋 | Packaging; Sacks; Description and method of measurement; Part 1 : Empty paper sacks |
| ISO 6591-2 | 包裝 袋 說明及測量方法 第2部分:熱塑柔性薄膜空袋 | Packaging; Sacks; Description and method of measurement; Part 2 : Empty sacks made from thermoplastic flexible film |
| ISO 6599-1 | 包裝 袋 試驗條件 第1部分:紙袋 | Packaging; Sacks; Conditioning for testing; Part 1 : Paper sacks |
| ISO 6661 | 新鮮水果和蔬菜 陸路運輸車輛上平行六面體包裝件的排列 | Fresh fruits and vegetables; Arrangement of parallelepipedic packages in land transport vehicles |
| ISO 7023 | 包裝.袋.空紙袋檢驗抽樣方法 | Packaging; Sacks; Method of sampling empty sacks for testing |
| ISO 7195 | 核能.六氟化鈾(UF6)的運輸包裝 | Nuclear energy - Packaging of uranium hexafluoride (UF6) for transport |
| ISO 7558 | 水果和蔬菜預包裝指南 | Guide to the prepacking of fruits and vegetables |
| ISO 7711-1 | 牙科旋轉器械 金鋼鉆器械 第1部分:尺寸、要求、標記和包裝 | Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging |
| ISO 780 | 包裝 貨物搬運的圖形標志 | Packaging - Pictorial marking for handling of goods |
| ISO 7965-1 | 包裝 袋 跌落試驗 第1部分:紙袋 | Packaging; Sacks; Drop test; Part 1 : Paper sacks |
| ISO 8037-2 Technical Corrigendum 1 | 光學和光學儀器.顯微鏡.載玻片.第2部分:材料質量、成品標準和包裝模式.技術勘誤1 | Optics and optical instruments - Microscopes; Slides - Part 2: Quality of material, standards of finish and mode of packaging; Technical Corrigendum 1 |
| ISO 8037-2 | 光學和光學儀器 顯微鏡 載玻片 第2部分:材料質量、成品標準和包裝模式 | Optics and optical instruments - Microscopes - Slides - Part 2: Quality of material, standards of finish and mode of packaging |
| ISO 8115-3 | 包 第3部分:棉包 包裝及標記 | Bales - Part 3: Bales of cotton - Packaging and labelling |
| ISO 8255-2 | 光學和光學儀器 顯微鏡 蓋玻片 第2部分:材料質量、成品標準和包裝模式 | Optics and optical instruments - Microscopes - Cover glasses - Part 2: Quality of materials, standards of finish and mode of packaging |
| ISO 8317 Technical Corrigendum 1 | 防兒童拆開的包裝.可再次包裝的要求和試驗程序.技術勘誤1 | Child-resistant packaging - Requirements and testing procedures for reclosable packages; Technical Corrigendum 1 |
| ISO 8317 | 防兒童拆開的包裝.可再次包裝的要求和試驗程序 | Child-resistant packaging - Requirements and testing procedures for reclosable packages |
| ISO 8318 | 包裝 滿裝的運輸包裝和單元貨物 采用可變頻的正弦振動試驗 | Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency |
| ISO 8351-1 | 包裝 袋 分類方法 第1部分:紙袋 | Packaging - Method of specification for sacks - Part 1: Paper sacks |
| ISO 8351-2 | 包裝 袋 分類方法 第2部分:熱塑柔性薄膜袋 | Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film |
| ISO 8367-1 | 包裝.一般用途包裝袋的尺寸公差.第1部分:紙袋 | Packaging; dimensional tolerances for general purpose sacks; part 1: paper sacks |
| ISO 8367-2 | 包裝 一般用途包裝袋的尺寸公差 第2部分:熱塑柔性薄膜袋 | Packaging; dimensional tolerances for general purpose sacks; part 2: sacks made from thermoplastic flexible film |
| ISO 8474 | 包裝 滿裝的運輸包裝 浸水試驗 | Packaging; Complete, filled transport packages; Water immersion test |
| ISO 8768 | 包裝 滿裝的運輸包裝 倒塌試驗 | Packaging; Complete, filled transport packages; Toppling test |
| ISO 9454-1 | 軟釬焊劑 分類和要求 第1部分:分類、標記和包裝 | Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging |
| ISO Guide 41 | 包裝標準.消費者要求 | Standards for packaging; consumer requirements |
| ISO/Guide 41 | 包裝標準 消費者的需求 | Standards for packaging - Consumer requirements |
| ISO/TR 210 | 精油 包裝材料及條件和儲存的通用規則 | Essential oils - General rules for packaging, conditioning and storage |
| ISO/TR 8281-1 | 包裝 用平面尺寸估計滿裝的容量 第1部分:紙袋 | Packaging; Estimating the filled volume using the flat dimensions; Part 1 : Paper sacks |
| 編號 | 中文名稱 | 英文名稱 |