微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 3567-001 | 航空航天系列 MIL-STD-1553B一致多元數據總線系統用在線偶合器 第001部分：技術規范 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification |
| EN 3567-003 | 航空航天系列 與MIL-STD-1553B一致多元數據總線系統在線偶合器 第003部分：單內嵌偶合器 產品標準 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard |
| EN 3567-004 | 航空航天系列 與MIL-STD-1553B一致多元數據總線系統在線偶合器 第004部分：雙在線耦合器 產品標準 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard |
| EN 50109-2-5 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-5部分：數據總線用帶2個內芯的電纜連接的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| EN 50182 | 用于過熱總線的導體 圓形同軸多股電纜芯線的導體 | Conductors for overhead lines - Round wire concentric lay stranded conductors / Note: Includes Corrigendum of July 2001 |
| EN 60439-2 | 低壓開關設備和控制設備組合裝置 第2部分：母線干線總線的特殊要求 | Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) (IEC 60439-2:2000) |
| EN 60821 | IEC-821-VME總線 1字節至4字節數據用微處理系統總線 | IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data (IEC 60821:1991, modified) |
| EN 60864-2 | 廣播發射機或發射機系統和監督設備之間互連的標準化 第2部分：使用數據總線互連的系統接口標準 | Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections (IEC 60864-2:1997) |
| EN 60933-4 | 音頻、視頻和視聽系統 互連和匹配值 第4部分：內部數字總線用連接器和接線點 | Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) (IEC 60933-4:1994) |
| EN 61030 | 音頻、視頻和視聽系統用 家用數字總線(D２B) | Audio, video and audiovisual systems; domestic digital bus (D2B) (IEC 61030:1991 + A1:1993) |
| EN 61158-2 | 工業控制系統用范圍總線標準 第2部分：物理層規范和服務定義 | Fieldbus standard for use in industrial control systems; part 2: physical layer specification and service definition (IEC 61158-2:1993) |
| EN 61158-2/prA1 | 工業控制系統用范圍總線標準 第2部分：物理層規范和服務定義 修改prA1 | Signal polarity requirements for wire media |
| HD 576 S1 | IEC 60822 VSB IEC 60821 VME總線的并聯子系統總線 | IEC 60822 VSB - Parallel sub-system bus of the IEC 60821 VME bus |
| HD 593.1 S1 | 微處理系統總線8比特和16比特數據(MULTIBUS I) 第1部分：功能描述和電氣及定時規范 | Microprocessor system bus 8-bit and 16-bit data (MULTIBUS I) - Part 1: Functional description with electrical and timing specifications (IEC 60796-1:1990) |
| HD 593.2 S1 | 微處理系統總線8比特和16比特數據(MULTIBUS I) 第2部分：帶邊緣連接器的系統總線配置的機械和插頭描述 | Microprocessor system bus 8-bit and 16-bit data (MULTIBUS I) - Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct) (IEC 60796-2:1990) |
| HD 593.3 S1 | 微處理系統總線8比特和16比特數據(MULTIBUS I) 第3部分：帶插頭和插座連接器的歐洲卡配置的機械和插頭描述 | Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I) - Part 3:Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors (IEC 60796-3:1990) |
| IEC 60079-27 | 爆炸性氣體環境用電氣設備.第27部分:現場總線本質安全原理(FISCO)和現場總線不易燃原理(FNICO) | Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) |
| IEC 60439-2 AMD 1 | 低壓開關設備和控制設備組合裝置.第2部分:母線干線系統總線的特殊要求.修改件1 | Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways); Amendment 1 |
| IEC 60439-2 Edition 3.1 | 低壓開關設備和控制設備組合裝置.第2部分:母線干線系統總線的特殊要求 | Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) |
| IEC 60439-2 | 低壓開關設備和控制設備組合裝置 第2部分:母線干線系統總線的特殊要求 | Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) |
| IEC 60552 AMD 1 | 計算機輔助測量與控制 多機箱系統組織 分支總線和A1型計算機輔助測量與控制機箱控制器規范 修改1 | CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1 |
| IEC 60552 | 計算機輔助測量與控制 多機箱系統組織 分支總線和A1型計算機輔助測量與控制機箱控制器規范 | CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1 |
| IEC 60728-7-3 | 電視信號、聲音信號和交互信號設備用電纜網絡.第7-3部分:混合光纖同軸電纜外部線纜狀況監測.電力轉發器接口 | Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring; Power supply to transponder interface bus (PSTIB) specification |
| IEC 60796-1 | 微處理機系統總線 8位和16位數據(MULTIBUS) 第1部分:電氣和定時規范的功能描述 | Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I); part 1: functional description with electrical and timing specifications |
| IEC 60796-2 | 微處理機系統總線 8位和16位數據(MULTIBUS) 第2部分:采用邊緣連接器(直接配合)作為系統總線配置的機械和插 | Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I); part 2: mechanical and pin descriptions for the system bus configuration, with edge connectors (direct) |
| IEC 60796-3 | 微處理機系統總線 8位和16位數據(MULTIBUS) 第3部分:采用插針和插座連接器(間接配合)作為歐洲卡配置的機械 | Microprocessor system BUS I, 8-bit and 16-bit data; part 3: mechanical and pin descriptions for the eurocard configuration with pin and socket (indirect) connectors |
| IEC 60821 AMD 1 | IEC 821 VME總線 1～4字節數據微處理機系統總線 修改1 | VMEbus - Microprocessor system bus for 1 byte to 4 byte data; Amendment 1 |
| IEC 60821 | IEC 821 VME總線 1～4字節數據微處理機系統總線 | IEC 60821-VMEbus; microprocessor system bus for 1 byte to 4 byte data |
| IEC 60822 | IEC 821 VME總線的并行子系統總線 | IEC 60822 VSB; parallel sub-system bus of the IEC 60821 VMEbus |
| IEC 60823 | 微處理機系統總線(VME總線) IEC 821總線(VME總線)的串行子系統總線 | Microprocessor system bus (VMSbus); serial sub-system bus of the IEC 60821 bus (VMEbus) |
| IEC 60864-2 | 廣播發射機或發射機系統和監控設備之間互連的標準化 第2部分:采用數據總線互連的系統接口標準 | Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections |
| IEC 60933-4 | 音頻、視頻和視聽系統 互連和匹配值 第4部分:內部數字總線用連接器和接線點 | Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) |
| IEC 61030 AMD 1 | 音頻、視頻和視聽系統 家用數字總線 修改1 | Audio, video and audiovisual systems; domestic digital bus (D2B); amendment 1 |
| IEC 61030 | 音頻、視頻和視聽系統 家用數字總線(D2B) | Audio, video and audiovisual systems; domestic digital bus (D2B) |
| IEC 61076-4-113 | 電子設備連接器.印制板連接器.第4-113部分:總線裝置中印制板和背板用格柵為2.5mm的5列兩件式連接器的詳細規 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| IEC 61158-2 Corrigendum 1 | 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第2部分:物理層規范和服務定義 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition |
| IEC 61158-2 | 測量和控制用數字數據通信.工業控制系統用現場總線.弟2部分:物理層規范和服務定義 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition |
| IEC 61158-3 | 測量和控制用數字數據通信.工業控制系統用現場總線.第3部分:數據鏈路服務定義 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
| IEC 61158-4 Corrigendum 1 | 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第4部分:數據鏈路協議規范 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
| IEC 61158-4 | 測量和控制用數字數據通信.工業控制系統用現場總線.第4部分:數據鏈路協議規范 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
| IEC 61158-5 Corrigendum 1 | 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第5部分:應用層服務定義 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| IEC 61158-5 | 測量和控制用數字數據通信.工業控制系統用現場總線.第5部分:應用層服務定義 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| IEC 61158-6 Corrigendum 1 | 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第6部分:應用層協議規范 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| IEC 61158-6 | 測量和控制用數字數據通信.工業控制系統用現場總線.第6部分:應用層協議規范 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| IEC 61301 | 核儀器 NIM儀器用數據總線 | Nuclear instrumentation - Digital bus for NIM instruments |
| IEC 61375-1 | 道路電氣設備 列車總線 第1部分:列車通信網 | Electric railway equipment - Train bus - Part 1: Train Communication Network |
| IEC 61784-1 Corrigendum 1 | 勘誤1.測量和控制用數字數據通信.第1部分:與工業控制系統用現場總線相關的連續和不連續制造用輪廓圖集 | Corrigendum 1 - Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems |
| IEC 61784-1 | 測量和控制用數字數據通信.第1部分:與工業控制系統用總線相關的連續和不連續制造用線型控制裝置 | Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems |
| IEC 62026-6 | 低壓開關設備和控制設備 控制器 器件的接口（CDIs） 第6部分 ：Seriplex（串行多路控制總線） | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 6: Seriplex (Serial Multiplexed Control Bus) |
| IEC/PAS 62030 | 測量和控制用數字數據通信.工業控制系統用現場總線.第1節:MODBUS應用協議.規范V1.1a.第2節: 實時發行-定購. | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Section 1: MODBUS Application Protocol - Specification V1.1a - Section 2: Real-Time Publish-Subscribe; RTPS Wire Protocol Specification Version 1.0 |
| IEC/PAS 62453-2 | 現場設備工具界面規范.第2部分:I網絡總線通訊(NTERBUS) | Field Device Tool (FDT) interface specification - Part 2: INTERBUS communication |
| IEC/PAS 62453-5 | 現場設備工具界面規范.第5部分:現場總線基金會(FOUNDATION FIELDBUS)通訊 | Field device tool (FDT) interface specification - Part 5: FOUNDATION FIELDBUS communication |
| IEC/TR 61158-1 | 測量和控制用數字數據通信.工業控制系統用子段總線.第1部分:IEC 61158系列的綜述和指南 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 1: Overview anf guidance for the IEC 61158 series |
| ISO 23570-2 | 工業自動化系統和集成.工業設施的分布式安裝.第2部分:混合通信總線 | Industrial automation systems and integration - Distributed installation in industrial applications - Part 2: Hybrid communication bus |
| ISO 6951 | 信息處理 處理機系統總線接口(歐洲總線A) | Information processing; Processor system bus interface (Eurobus A) |
| ISO/IEC 10857 | 信息技術 微處理機系統 未來總線 邏輯協議規范 | Information technology - Microprocessor systems - Futurebus+ - Logical protocol specification |
| ISO/IEC 10861 | 信息技術 微處理機系統 高性能同步32位總線:MULTIBUSⅡ | Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II |
| ISO/IEC 11458 AMD 1 | 信息技術 微處理機系統 VIC總線 板箱間電纜總線 補充1 | () |
| ISO/IEC 11458 | 信息技術.微處理機系統.VIC總線.板箱間電纜總線 | Information technology; microprocessor systems; VICbus; inter-crate cable bus |
| ISO/IEC 13213 | 信息技術.微處理機系統.微處理機總線的控制和狀態登記(CSR)體系結構 | Information technology - Microprocessor systems - Control and Status Registers (CSR) architecture for microcomputer buses |
| ISO/IEC 14576 | 信息技術 同步分離傳送類型總線(ST總線) 邏輯層 | Information technology - Synchronous split transfer type system bus (Stbus) - Logical layer |
| ISO/IEC 14776-232 | 信息技術 小型計算機系統接口(SCSI) 第232部分：系列總線協議2 (SBP-2) | Information technology - Small computer system interface (SCSI) - Part 232: Serial Bus Protocol 2 (SBP-2) |
| ISO/IEC 15205 | SBus-基片和模塊互連總線 | SBus - Chip and module interconnect bus |
| ISO/IEC 15776 | VME64總線.規范 | VME64bus - Specification |
| JIS X6801 | 同步分離傳遞型系統總線(STbus).邏輯層 | Synchronous split transfer type system bus (STbus) -- Logical layer |
| prEN 50159 | 鐵路應用 對于使用串聯單總線的有關系統通信安全的基本要求 | Railway applications; basic requirements for safety related system communication using a serial single BUS |
| prEN 61128 | 交流隔離器 由隔離器轉變總線變換電流 | Alternating current disconnectors; bus-transfer current switching by disconnectors (IEC 61128:1992) |
| prEN 61158-2 | 工業控制系統用范圍總線標準 第2部分：物理層規范和服務定義 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification (IEC 61158-2:200X - (65C/289/FDIS)) |
| prEN 61158-3 | 測量和控制用數字數據通信 工業控制系統用現場總線 第3部分：數據鏈路服務定義 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link layer service definition (IEC 61158-3:200X - (65C/290/FDIS)) |
| prEN 61158-4 | 測量和控制用數字數據通信 工業控制系統用現場總線 第4部分：數據鏈路協議規范 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link layer protocol specifications (IEC 61158-4:200X - (65C/291/FDIS)) |
| prEN 61158-5 | 測量和控制用數字數據通信 工業控制系統用現場總線 第5部分：應用層服務定義 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definitions (IEC 61158-5:200X - (65C/292/FDIS)) |
| prEN 61158-6 | 測量和控制用數字數據通信 工業控制系統用現場總線 第6部分：應用層協議規范 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification (IEC 61158-6:200X - (65C/293/FDIS)) |
| 編號 | 中文名稱 | 英文名稱 |