微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60073 | 人-機接口,標記和鑒別用的基本原理和安全原則.指示設備和調節器的編碼原理 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| IEC 60535 | 噴流扇和調速器 | Jet fans and regulators |
| IEC 60665 | 家用和類似用途的交流排氣扇及其調速器 | A.C. electric ventilating fans and regulators for household and similar purposes |
| IEC 60723-5-1 | 通信用電感器和變壓器磁芯 第5部分:分規范:用于可調電感器和變壓器中的磁性氧化物磁芯的調節器 第1節:空白 | Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers; section 1: blank detail specification; assessment level A |
| IEC 60723-5 | 通信用電感器和變壓器磁芯 第5部分:分規范:用于可調電感器和變壓器中的磁性氧化物磁芯的調節器 | Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers |
| IEC 60730-2-11 | 家用和類似用途的電氣自動控制器 第2-11部分:能量調節器的特殊要求 | Automatic electrical controls for household and similar use - Part 2: Particular requirements for energy regulators |
| IEC 60879 Corrigendum 1 | 電環流扇和調速器的性能與結構 | Performance and construction of electric circulating fans and regulators |
| IEC 60879 | 環流扇和調速器的性能與結構 | Performance and construction of electric circulating fans and regulators |
| IEC 61683 | 光伏系統 功率調節器 效率測量程序 | Photovoltaic systems - Power conditioners - Procedure for measuring efficiency |
| IEC 61800-1 | 可調速電力傳動系統 第1部分:一般要求 低壓可調速直流電力傳動系統的定額規范 | Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems |
| IEC 61800-2 | 可調速電力傳動系統 第2部分:一般要求 低壓可調頻交流電力傳動系統的定額規范 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems |
| IEC 61800-3 | 可調速電力傳動系統 第3部分:電磁兼容要求和特定試驗方法 | Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
| IEC 61800-4 | 可調速的電氣動力驅動系統.第4部分:一般要求.大于1000V但不超過35KV交流電的交流動力驅動系統的等級規范 | Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV |
| IEC 61800-5-1 Corrigendum 1 | 可調速電力傳動系統.第5-1部分:安全要求.電、熱、能.技術勘誤1 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy; Corrigendum 1 |
| IEC 61800-5-1 | 可調速的電驅動系統.第5-1部分:安全要求.電、熱及能量 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy |
| IEC 61822 | 機場的照明和信號燈的電氣裝置.恒流調節器 | Electrical installations for lighting and beaconing of aerodromes - Constant current regulators |
| IEC/TR 61800-6 | 可調速電力驅動系統.第6部分:負載類型和相應電流額定值的測定指南 | Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings |
| ISO 10524-1 | 醫用氣體設備用的壓力調節器.第1部分:壓力調節器和帶流量計的壓力調節器 | Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 10524-2 | 醫用氣體用壓力調節器.第2部分:進氣壓力調節器和線性壓力調節器 | Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators |
| ISO 10524-3 | 醫用氣體設備用的壓力調節器.第3部分:帶氣瓶閥的壓力調節器 | Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves |
| ISO 14617-8 | 圖表用圖形符號.第8部分:閥門和氣流調節器 | Graphical symbols for diagrams - Part 8: Valves and dampers |
| ISO 15500-10 | 道路車輛 壓縮天然氣(CNG)燃料系統部件 第10部分:氣流調節器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster |
| ISO 23551-2 | 氣體燃燒器和燃?xì)庠O(shè)備用安全和控制裝置.特殊要求.第2部分:壓力調節器 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 2: Pressure regulators |
| ISO 3046-4 | 往復式內燃機 性能 第4部分:調速 | Reciprocating internal combustion engines - Part 4: Speed governing |
| ISO 6263 | 液壓傳動 調速閥 安裝面 | Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces |
| ISO 7291 | 氣焊設備 用于300 bar以下的焊接、切割及相關工藝用匯流系統上的壓力調節器 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar |
| ISO 7292 | 焊接、切割和相關工藝用氣瓶流量調節器 分類和規范 | Flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification and specifications |
| ISO 8854 | 道路車輛 帶調節器的交流發電機 試驗方法和一般要求 | Road vehicles; alternators with regulators; test methods and general requirements |
| 編號 | 中文名稱 | 英文名稱 |