微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60050-561 AMD 1 | 國際電工詞匯 第561章:頻率控制與選擇用壓電器件 第561-06節:表面聲波濾波器 修改1 | International Electrotechnical Vocabulary - Chapter 561: Piezoelectric devices for frequency control and selection - Section 561-06: Surface acoustic wave filters; Amendment 1 |
| IEC 60050-561 AMD 2 | 國際電工詞匯.第561章:頻率控制和選擇用壓電器件.第561-07節:表面聲波設備的特性.修改件2 | International Electrotechnical Vocabulary - Chapter 561: Piezoelectric devices for frequency control and selection - Section 561-07: Characteristics of surface acoustic wave (saw) devices; Amendment 2 |
| IEC 60050-561 | 國際電工詞匯 第561章:頻率控制和選擇用壓電器件 | International electrotechnical vocabulary; chapter 561: piezoelectric devices for frequency control and selection |
| IEC 60051-4 | 直接作用模擬指示電測量儀表及其附件 第4部分:頻率表的特殊要求 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4 : Special requirements for frequency meters |
| IEC 60107-1 | 電視廣播傳輸接收機的測量方法 第1部分:一般要求 廣播和電視頻率顯示的測量 | Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements on displays at radio and video frequencies |
| IEC 60122-2-1 AMD 1 | 頻率控制和選擇用石英晶體元件 第2部分:頻率控制和選擇用石英晶體元件使用指南 第1節:微處理器鐘用石英晶體 | Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; section 1: quartz crystal units for microprocessor clock supply |
| IEC 60122-2-1 | 頻率控制和選擇用石英晶體元件 第2部分:頻率控制和選擇用石英晶體元件使用指南 第1節:微處理器時鐘用石英晶 | Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; section 1: quartz crystal units for microprocessor clock supply |
| IEC 60122-2 | 頻率控制和選擇用石英晶體元件 第2部分:頻率控制和選擇用石英晶體元件使用指南 | Quartz crystal units for frequency control and selection. Part 2 : Guide to the use of quartz crystal units for frequency control and selection |
| IEC 60130-10 | 頻率低于3MHz的連接器 第10部分:便攜式娛樂設備對外接低壓電源用連接器 | Connectors for frequencies below 3 MHz. Part 10 : Connectors for coupling an external low-voltage power supply to portable entertainment equipment |
| IEC 60130-12 | 頻率低于3MHz的連接器 第12部分:電路連接和試驗用連接器 | Connectors for frequencies below 3 MHz. Part 12 : Link and test connectors |
| IEC 60130-16 | 頻率低于3MHz的連接器 第16部分:雙列印制線路板連接器,其接觸件及其引出端間距為2.54mm(0.1 in) | Connectors for frequencies below 3 MHz. Part 16 : Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54 mm (0.1 in) |
| IEC 60130-17 | 頻率低于3MHz的連接器 第17部分:可充電電池用可多向插合的互連器件的詳細規范 | Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| IEC 60130-2 AMD 1 | 頻率低于3MHz的連接器 第2部分:無線電接收機及相關音響設備用連接器 修改1 | Connectors for frequencies below 3 MHz. Part 2 : Connectors for radio receivers and associated sound equipment |
| IEC 60130-2 | 頻率低于3MHz的連接器 第2部分:無線電接收機及相關音響設備用連接器 | Connectors for frequencies below 3 MHz. Part 2 : Connectors for radio receivers and associated sound equipment |
| IEC 60130-3 | 頻率低于3MHz的連接器 第3部分:電池組連接器 | Connectors for frequencies below 3 MHz. Part 3 : Battery connectors |
| IEC 60130-4 | 頻率低于3MHz的連接器 第4部分:螺紋連接多接觸件圓形連接器 | Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threaded coupling |
| IEC 60130-4A | 頻率低于3MHz的連接器 第4部分:螺紋連接多接觸件圓形連接器 補充1 | Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threaded coupling. |
| IEC 60130-5 | 頻率低于3MHz的連接器 第5部分:刀形多接觸件矩形連接器 | Connectors for frequencies below 3 MHz. Part 5 : Rectangular multipole connectors with blade contacts |
| IEC 60130-6 | 頻率低于3MHz的連接器 第6部分:小型刀形多接觸件矩形連接器 | Connectors for frequencies below 3 MHz. Part 6 : Rectangular miniature multipole connectors with blade contacts |
| IEC 60130-7 | 頻率低于3MHz的連接器 第7部分:卡口或推拉式多接觸件圓形連接器 | Connectors for frequencies below 3 MHz. Part 7 : Circular multipole connectors with bayonet or push-pull coupling |
| IEC 60130-8 | 頻率低于3MHz的連接器 第8部分:無線電設備中音頻線路用同心連接器 | Connectors for frequencies below 3 MHz. Part 8 : Concentric connectors for audio circuits in radio receivers |
| IEC 60130-9 | 頻率低于3MHz的連接器 第9部分:無線電及相關音響設備用圓形連接器 | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
| IEC 60169-26 | 射頻連接器 第26部分:螺紋連接射頻同軸連接器 特性阻抗50Ω 頻率范圍0-18Hz(TNC18GHz型) | Radio-frequency connectors; part 26: R.F. coaxial connectors with screw coupling; characteristic impedance 50 ohms; frequency range 0 to 18 GHz (type TNC 18 GHz) |
| IEC 60196 | IEC標準頻率 | I E C standard frequencies |
| IEC 60244-6 | 無線電發射機的測量方法 第6部分:在130KHz-1GHz頻率范圍內的機箱輻射 | Methods of measurement for radio transmitters. Part 6 : Cabinet radiation at frequencies between 130 kHz and 1 GHz |
| IEC 60244-7 | 無線電發射機的測量方法 第7部分:在1GHz以上頻率的機箱輻射 | Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz |
| IEC 60244-7A | 無線電發射機的測量方法 第7部分:在1GHz以上頻率的機箱輻射 補充1:第4節:中型發射機 第5節:大型發射機 | Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz. First supplement: Sections four and five: Medium-sized and large transmitters |
| IEC 60255-22-7 | 電氣繼電器.第22-7部分:量度繼電器和保護裝置的電氣干擾試驗.電源頻率抗擾試驗 | Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment; Power frequency immunity tests |
| IEC 60263 | 繪制頻率特性和極坐標圖用的標度和尺寸 | Scales and sizes for plotting frequency characteristics and polar diagrams |
| IEC 60377-1 | 絕緣材料在300MHz以上頻率下介電性能測定方法 第1部分:總則 | Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 1 : General |
| IEC 60377-2 | 絕緣材料在300MHz以上頻率下介電性能測定方法 第2部分:諧振法 | Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 2 : Resonance methods |
| IEC 60404-6 | 磁性材料.第6部分:使用環形試樣的頻率范圍在20至200kHz的軟磁金屬材料和粉末材料磁性能的測量方法 | Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens |
| IEC 60444-1 AMD 1 | 用π型網絡零相位技術測量石英晶體元件參數 第1部分:用π型網絡零相位技術測量石英晶體元件的諧振頻率和諧 | Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network; Amendment 1 |
| IEC 60444-1 | 用π型網絡零相位技術測量石英晶體元件參數 第1部分:用π型網絡零相位技術測量石英晶體元件的諧振頻率和諧 | Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 1: basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network |
| IEC 60444-4 | 用π型網絡的零相位技術測量石英諧振器參數.第4部分:石英晶體元件負荷諧振頻率fl、負荷諧振電阻Rl的測量方 | Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 4: method for the measurement of the load resonance frequency FL load resonance resistance RL and the calculation of other derived values of quartz crystal units, up to 30 MHz |
| IEC 60444-7 | 石英晶體元件參數的測量.第7部分:石英晶體元件的放射性和頻率下降測量 | Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units |
| IEC 60487-2-4 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第4節:頻率調制器 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Four - Frequency modulators |
| IEC 60487-2-5 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第5節:頻率調制器 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Five - Frequency demodulators |
| IEC 60510-2-5 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第5節:頻率調制器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 5: frequency modulators |
| IEC 60510-2-6 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第6節:頻率解調器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 6: frequency demodulators |
| IEC 60510-3-2 | 衛星地面站用無線電設備的測量方法 第3部分:分系統組合測量方法 第2節:頻率范圍為4GHz～6GHz的接收系統品質 | Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section Two: Measurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range |
| IEC 60556 | 用于微波頻率的旋磁材料.性能的測量方法 | Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties |
| IEC 60603-1 AMD 1 | 印制板用頻率低于3MHz的連接器 第1部分:總規范 具有評定質量的詳細規范的總要求和編寫指南 修改1 | Connectors for frequencies below 3 MHz for use with printed boards; part 1: generic specification; general requirements and guide for the preparation of detail specifications, with assessed quality; amendment 1 |
| IEC 60603-1 | 印制板用頻率低于3MHz的連接器 第1部分:總規范 一般要求和帶有質量評定的連接器詳細規范的編寫指南 | Connectors for frequencies below 3 MHz for use with printed boards; part 1: generic specification; general requirements and guide for the preparation of detail specifications, with assessed quality |
| IEC 60603-10 | 印制板用頻率低于3MHz的連接器 第10 部分:反裝型基本網格為2.54 mm (0.1 in)的印制板用兩件式連接器 | Connectors for frequencies below 3 MHz for use with printed boards; part 10: two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type |
| IEC 60603-11 | 印制板用頻率低于3MHz的連接器 第11部分:同軸連接器詳細規范(自由連接器和固定連接器尺寸) | Connectors for frequencies below 3 MHz for use with printed boards; part 11: detail specification for concentric connectors (dimensions for free connectors and fixed connectors) |
| IEC 60603-12 | 印制板用頻率低于3MHz的連接器 第12部分:集成電路用系列插座的尺寸、一般要求和試驗的詳細規范 | Connectors for frequencies below 3 MHz for use with printed boards; part 12: detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
| IEC 60603-13 | 印制板用頻率低于3MHz的連接器 第13部分:有質量評定的和不可接觸絕緣位移接端(ID)自由連接器、基本網格為2. | Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
| IEC 60603-14 | 印制板用頻率低于3MHz的連接器 第14部分:音頻、視頻和音像設備用低音頻及視頻圓形連接器詳細規范 | Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
| IEC 60603-2 AMD 1 | 印制板用頻率低于3MHz的連接器 第2部分:有質量評定和具有通用普通安裝特性、基本網格為2.54 mm (0.1in)的印 | Connectors for frequencies below 3 MHs for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features; Amendment 1 |
| IEC 60603-2 | 印制板用頻率低于3MHz的連接器 第2部分:有質量評定和具有通用普通安裝特性、基本網格為2.54 mm (0.1 in)的 | Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| IEC 60603-3 | 印制板用頻率低于3MHz的連接器 第3部分:具有接觸件中心間距為2.54 mm (0.100 in)及以同樣間距交錯排列接端 | Connectors for frequencies below 3 MHz for use with printed boards. Part 3 : Two-part connectors for printed boards having contacts spaced 2.54 mm (O.100 in) centres and staggered terminations at that same spacing |
| IEC 60603-4 | 印制板用頻率低于3MHz的連接器 第4部分:具有接觸件中心間距為1.91 mm (0.075 in)及以同樣間距交錯排列接端 | Connectors for frequencies below 3 MHz for use with printed boards. Part 4 : Two-part connectors for printed boards having contacts spaced at 1.91 mm (0.075 in) centres and staggered terminations at that same spacing |
| IEC 60603-5 | 印制板用頻率低于3MHz的連接器 第5部分:間距為2.54 mm (0.1 in)雙面印制板用的邊緣插座連接器和兩件式連接 | Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (O.1 in) spacing |
| IEC 60603-6 | 印制板用頻率低于3MHz的連接器 第6部分:標稱厚度為1.6 mm (0.063 in)單面或雙面印制板用接觸件間距為2.54 m | Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge-socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm (0.063 in) nominal thickness. |
| IEC 60603-7 | 印制板用頻率低于3MHz的連接器 第7部分:有質量評定的具有通用插合特性包括固定和自由連接器的8位連接器詳細 | Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality |
| IEC 60603-7-4 | 電子設備連接器.第7-4部分:數據傳輸頻率250MHZ及以下的8位非屏蔽自由和固定連接器的詳細規范 | Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| IEC 60603-7-7 | 電子設備用連接器.第7-7部分:有最大頻率為600MHz的數據傳輸用8路屏蔽的固定和自由連接器的詳細規范 | Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz |
| IEC 60603-8 | 印制板用頻率低于3MHz的連接器 第8部分:具有0.63 mm×0.63 mm的方形陽接觸件基本網格為2.54 mm (0.1 in)的 | Connectors for frequencies below 3 MHz for use with printed boards; part 8: two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm × 0,63 mm |
| IEC 60603-9 | 印制板用頻率低于3MHz的連接器 第9部分:基本網格為2.54 mm (0.1 in)的印制板、底板和電纜連接器用兩件式連 | Connectors for frequencies below 3 MHz for use with printed boards; part 9: two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
| IEC 60642 AMD 1 | 頻率控制和選擇用壓電陶瓷諧振子和諧振器 第1章:標準值和條件 第2章:測量和試驗條件 修改1 | Piezoelectric ceramic resonators and resonator units for frequency control and selection; chapter 1: standard values and conditions; chapter 2: measuring and test conditions; amendment 1 |
| IEC 60642 | 頻率控制和選擇用壓電陶瓷諧振子和諧振器 第1章:標準值和條件 第2章:測量和試驗條件 | Piezoelectric ceramic resonators and resonator units for frequency control and selection. Chapter I: Standard values and conditions. Chapter II: Measuring and test conditions |
| IEC 60747-16-2 | 半導體器件 第16-2部分：微波集成電路 頻率預定標器 | Semiconductor devices - Part 16-2: Microwave integrated circuits; Frequency prescalers |
| IEC 60747-16-3 | 半導體器件.第16-3部分:微波集成電路.頻率變壓器 | Semiconductor devices - Part 16-3: Microwave integrated circuits; Frequency converters |
| IEC 60749-12 Corrigendum 1 | 半導體器件.機械和氣候試驗方法.第12部分:振動、可變頻率 | Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency |
| IEC 60749-12 | 半導體器件.機械和氣候試驗方法.第12部分: 振動,可變頻率 | Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency |
| IEC 60807-1 | 頻率低于3MHz的矩形連接器 第1部分:總規范 一般要求和有質量評定要求的連接器詳細規范的編寫指南 | Rectangular connectors for frequencies below 3 MHz; part 1: generic specification; general requirements and guide for the preparation of detail specifications for connectors with assessed quality |
| IEC 60807-2 AMD 1 | 頻率低于3MHz的矩形連接器 第2部分:具有梯形金屬外殼和圓形錫焊型接觸件的有質量評定要求的系列連接器的詳 | Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types; Amendment 1 |
| IEC 60807-2 | 頻率低于3MHz的矩形連接器 第2部分:具有梯形金屬外殼和圓形錫焊型接觸件的有質量評定要求的系列連接器詳細 | Rectangular connectors for frequencies below 3 MHz; part 2: detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts; fixed solder contact types |
| IEC 60807-3 | 頻率低于3MHz的矩形連接器 第3部分:具有梯形金屬外殼和圓形接觸件的系列連接器詳細規范 具有封閉式接筒的后 | Rectangular connectors for frequencies below 3 MHz; part 3: detail specification for a range of connectors with trapezoidal shaped metal sheels and round contacts; removable crimp contact types with closed crimp barrels, rear insertion/rear extraction |
| IEC 60807-6 | 頻率低于3MHz的矩形連接器 第6部分:具有定位導向件的20號(7.5A)圓形接觸件的系列矩形連接器詳細規范 固定錫 | Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range of rectangular connectors with size 20 (7,5A) round contacts having polarized guides - Fixed solder contact types |
| IEC 60807-7 | 頻率低于3MHz的矩形連接器 第7部分:具有定位導向件或插拔鎖緊螺桿和16號(13A)圓形接觸件的系列連接器詳細規 | Rectangular connectors for frequencies below 3 MHz; part 7: detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts; removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality |
| IEC 60807-8 | 頻率低于3MHz的矩形連接器 第8部分:具有4個信號接觸件和電纜屏蔽用接地接觸件的連接器詳細規范 | Rectangular connectors for frequencies below 3 MHz; part 8: detail specification for connectors, four-signal contacts and earthing contacts for cable screen |
| IEC 60807-9 | 頻率低于3MHz的矩形連接器 第9部分:電視機用系列連接器詳細規范 | Rectangular connectors for frequencies below 3 MHz; part 9: detail specification for a range of peritelevision connectors |
| IEC 60866 | 工作在0.50～15MHz頻率范圍內的水聽器的特性和校準 | Characteristics and calibration of hydrophones for operation in the frequency range O.5 MHz to 15 MHz |
| IEC 61000-4-16 AMD 1 | 電磁兼容性(EMC) 第4-16部分:試驗和測量技術 對頻率在0～150KHz范圍內的傳導共模騷擾的抗擾度試驗 修改1 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz; Amendment 1 |
| IEC 61000-4-16 Edition 1.1 | 電磁兼容性(EMC).第4-16部分:試驗和測量技術.0 Hz-150 KHz頻率范圍的普通模塊導電抗擾試驗 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz |
| IEC 61000-4-16 | 電磁兼容性(EMC) 第4-16部分:試驗和測量技術 對頻率在0～150KHz范圍內的傳導共模騷擾的抗擾度試驗 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz |
| IEC 61000-4-28 AMD 1 | 電磁兼容性(EMC) 第4-28部分:試驗和測量技術 電力頻率變化、抗擾度試驗 修改1 | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variation of power frequency, immunity test; Amendment 1 |
| IEC 61000-4-28 Edition 1.1 | 電磁兼容性(EMC).第4-28部分:試驗和測量技術.電源頻率變化和抗擾試驗 | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variation of power frequency, immunity test |
| IEC 61000-4-28 | 電磁兼容性(EMC) 第4-28部分:試驗和測量技術 電力頻率變化、抗擾度試驗 | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test |
| IEC 61000-4-8 Edition 1.1 | 電磁兼容性.第4-8部分:試驗和測量方法.電源頻率磁場抗擾試驗 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques; Power frequency magnetic field immunity test |
| IEC 61094-6 | 測量傳聲器.第6部分:頻率響應的測定用靜電致動器 | Measurement microphones - Part 6: Electrostatic actuators for determination of frequency response |
| IEC 61101 | 0.5MHz～15MHz頻率范圍內采用平面掃描技術對水聽器的絕對校準 | The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz |
| IEC 61102 AMD 1 | 0.5MHz～15MHz頻率范圍內用水聽器測量和表征超聲場 修改1 | Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz; amendment 1 |
| IEC 61102 | 0.5MHz～15MHz頻率范圍內用水聽器測量和表征超聲場 | Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz |
| IEC 61161 Edition 1.1 | 頻率范圍在0,5MHZ到25MHZ的液體中超聲電力測量 | Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz |
| IEC 61161 | 0.5MHz～25MHz頻率范圍內液體中超聲波功率測量 | Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz |
| IEC 61240 | 壓電器件 頻率控制和選擇用表面安裝器件外形圖制備 總則 | Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - Genral rules |
| IEC 61338-1-4 | 波導型介電諧振器.第1-4部分:一般信息和試驗條件.毫米波頻率時介電諧振器材料的相對復介電常數測量方法 | Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency |
| IEC 61566 | 射頻電磁場輻照測量 頻率范圍從100kHz～1GHz間的場強 | Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz |
| IEC 61689 | 超聲學 理療裝置 0.5MHz～5MHz頻率范圍內的性能要求和測量方法 | Ultrasonics - Physiotherapy systems - Performance requirements and methods of measurement in the frequency range 0,5 MHz to 5 MHz |
| IEC 61788-7 | 超導性.第7部分:電特性測量.微波頻率下超導體的表面電阻 | Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance of superconductors at microwave frequencies |
| IEC 61837-1 | 頻率控制和選擇用表面安裝的壓電器件 標準外形和端頭連接 第1部分:塑料模壓外殼外形 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines |
| IEC 61837-2 | 頻率控制和選擇用表面安裝的壓電器件 標準外形和端頭連接 第2部分:陶瓷外殼 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures |
| IEC 61837-3 | 頻率控制和選擇用表面安裝的壓電器件 標準外形和端頭連接 第3部分:金屬外殼 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures |
| IEC 61837-4 | 頻率控制和選擇用表面安裝的壓電器件.標準外形和端頭連接器.第4部分:混合外殼輪廓圖 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 4: Hybrid enclosure outlines |
| IEC 62092 | 超聲學 水聽器 15MHz至40MHz頻率范圍內的特性和校準 | Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz |
| IEC 62106 | 頻率范圍為87.5～108.0MHz的VHF/FM聲音廣播用無線電數據系統(RDS)的規范 | Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz |
| IEC 62209-1 | 人暴露于手持和車載無線通信設備產生的射頻場.人體模型、儀器和規程.第1部分:緊貼耳朵使用的手持設備(頻率 | Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) |
| IEC/PAS 60603-7-3 | 電子設備用連接件.第7-3部分:100 MHz頻率及以下的數據傳輸用8路屏蔽的活動式連接器和固定式連接器的詳細規 | Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
| IEC/PAS 61076-3-110 | 電子設備用連接器.第3-110部分:頻率在600MHz以下的8位連接器的詳細規范 | Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz |
| IEC/PAS 61076-3-111 | 電子設備用連接器.第3-111部分:工業環境最高頻率為250Hz的8頻道,有屏蔽和無屏蔽的,松散的和固定連接器的詳 | Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz |
| IEC/PAS 61076-3-114 | 電子設備用連接器.第3-114部分:矩形型連接器.與IEC 60603-7系列接口結合的工業環境用、最高頻率為600Hz的8 | Connectors for electronic equipment - Part 3-114: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| IEC/PAS 61076-3-115 | 電子設備用連接器.第3-115部分:矩形連接器.與IEC 60603-7系列接口結合的工業環境用最高頻率為600Hz的8頻道 | Connectors for electronic equipment - Part 3-115: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
| IEC/PAS 61076-3-116 | 電子設備用連接器.第3-116部分:矩形連接器.與IEC 60603-7系列接口結合的工業環境用最高頻率為600Hz的8頻道 | Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp |
| IEC/PAS 61169-4 | 無線電頻率連接器.第4部分:分規范.具有螺釘鎖定的外部導體內徑為16mm(0.63in)的射頻同軸連接器.特性阻抗為5 | Radio-frequency connectors - Part 4: Sectional specification - Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16) |
| IEC/PAS 62187 Edition 1.0 | 可變頻率的振動試驗方法 | Variable frequency vibration test method |
| IEC/TR 60283 | 濾波器晶體單元的無用諧振頻率和等效電阻的測量方法 | Methods for the measurement of frequency and equivalent resistance of unwanted resonances of filter crystal units |
| IEC/TR 60444-3 | 用π型網絡零相位技術測量石英晶體元件參數 第3部分:利用有并聯電容Co補償?shù)摩行途W(wǎng)絡相位技術測量頻率達200 | Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 3: basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a w-network with compensation of the parallel capacitance C<(Index)0> |
| IEC/TR 60479-2 | 通過人體的電流的效應 第2部分:特殊情況 第4章:頻率100Hz以上的交流電流的效應 第5章:特殊電流波形的效應 | Effects of current passing through the human body. Part 2 : Special aspects. Chapter 4: Effects of alternating current with frequencies above 100 Hz. Chapter 5: Effects of special waveforms of current. Chapter 6: Effects of unidirectional single impulse currents of short duration |
| IEC/TR 60657 | 頻率范圍為10MHz-300,000MHz的非電離的輻射危險 | Non-ionizing radiation hazards in the frequency range from 1O MHz to 300 000 MHz |
| IEC/TR 61000-1-4 | 電磁兼容性(EMC).第1-4部分:總則.頻率范圍2kHz及以下的設備排放的電源頻率傳導的諧波電流的限值的歷史比率 | Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz |
| IEC/TR2 61220 | 超聲學聲場 0.5MHz～15MHz頻率范圍內用水聽器測量和表征醫療超聲設備產生的超聲場的指南 | Ultrasonics-fields; guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz |
| IEC/TR3 61000-2-3 | 電磁兼容性(EMC) 第2部分:環境 第3節:環境的描述 輻射現象和與非網頻率有關的傳導現象 | Electromagnetic compatibility (EMC); part 2: environment; section 3: description of the environment; radiated and non-network-frequency-related conducted phenomena |
| IEC/TR3 61141 | 射頻同軸連接器的頻率上限 | Upper frequency limit of r.f. coaxial connectors |
| IEC/TS 61334-5-5 | 采用配電線載波系統的配電自動化 第5-5部分：低層文件集 擴展頻譜 快頻率跳躍（SS-FFH）文件集 | Distribution automation using distribution line carrier systems - Part 5-5: Lower layer profiles - Spread spectrum-fast frequency hopping (SS-FFH) profile |
| IEC/TS 61994-1 | 頻率控制和選擇用壓電和介電器件.詞匯.第1部分:壓電和介電諧振器 | Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 1: Piezoelectric and dielectric resonators |
| IEC/TS 61994-2 | 頻率控制和選擇用壓電和介電器件 術語 第2部分:壓電和介電濾波器 | Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 2: Piezoelectric and dielectric filters |
| IEC/TS 61994-3 | 頻率控制和選擇用壓電和介電器件.詞匯.第3部分:壓電和介質振蕩器 | Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 3: Piezoelectric and dielectric oscillators |
| IEC/TS 61994-4-1 | 頻率控制和選擇用壓電和介電器件 術語 第4-1部分：壓電材料 合成石英晶體 | Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-1: Piezoelectric materials; Synthetic quartz crystal |
| IEC/TS 61994-4-2 | 頻率控制和選擇用壓電和介電器件.術語匯編.第4-2部分:壓電和介電材料.壓電陶瓷 | Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics |
| IEC/TS 61994-4-4 | 頻率控制和選擇用壓電和介電器件.術語匯編.第4-4部分:材料.表面聲波設備用材料 | Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices |
| ISO 11093-8 | 紙和紙板 紙芯的檢測 第8部分:試驗?zāi)Ｐ头治龇y定自然頻率和彎曲模量 | Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis |
| ISO 11785 | 動物對無線電頻率識別的技術概念 | Radio frequency identification of animals - Technical concept |
| ISO 15186-3 | 聲學.用聲強進行建筑物和建筑構件的隔聲測量.第3部分:低頻率實驗室測量 | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies |
| ISO 16 | 聲學 標準調音頻率(標準音調) | Acoustics; Standard tuning frequency (Standard musical pitch) |
| ISO 2247 | 包裝 滿裝的運輸包裝和單元貨物 固定低頻率振動試驗 | Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency |
| ISO 266 | 聲學 優選頻率 | Acoustics - Preferred frequencies |
| ISO 3389 | 航空器 無線電頻率的撓性同軸電纜 尺寸和電氣特性 | Aircraft; Radio frequency flexible coaxial cables; Dimensions and electrical characteristics |
| ISO 5347-14 | 振動與沖擊傳感器的校準方法 第14部分:安裝在鋼塊上的無阻尼加速度計共振頻率的測試 | Methods for the calibration of vibration and shock pick-ups; part 14: resonance frequency testing of undamped accelerometers on a steel block |
| ISO 7196 | 聲學 次聲測量用的頻率計權特性 | Acoustics - Frequency-weighting characteristic for infrasound measurements |
| ISO 7831 | 電影 35mm電影片光學聲跡的還音A環(電聲)頻率響應 還音特性 | Cinematography; A-chain frequency response for reproduction of 35 mm photographic sound; Reproduction characteristics |
| ISO 8590 | 電影 70mm電影涂磁發行拷貝上磁性聲跡 錄音頻率響應特性 | Cinematography - Audio records on 70 mm motion-picture release prints with magnetic stripes - Recorded characteristic |
| ISO 8622 | 電影 70mm電影涂磁發行拷貝上磁性聲跡 A環還音頻率響應特性 | Cinematography - Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes - A-chain reproduction characteristics |
| ISO/IEC 14443-2 | 識別卡 無接觸點集成電路卡 近程卡 第2部分：無線電頻率功率和信號接口 | Identification cards - Contactless integrated circuit(s) cards; Proximity cards - Part 2: Radio frequency power and signal interface |
| ISO/TR 10305-1 | 道路車輛.電磁場強度測量設備的校正.第1部分:頻率大于0Hz的電磁場測量設備 | Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies 0 Hz |
| ISO/TR 15461 | 鋼制鍛件 機械試驗用試驗頻率、抽樣條件和試驗方法 | Steel forgings - Testing frequency, sampling conditions and test methods for mechanical tests |
| ISO/TR 389-5 | 聲學 校正聽力設備的基準零級 8kHz-16kHz頻率范圍內的純音的等效閾聲壓級 | Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz |
| 編號 | 中文名稱 | 英文名稱 |