微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DL/T 1077 | 苯乙烯系離子交換樹脂有機溶出物測定方法（動態法） | Determination for organic leachables of styrene ion exchange resins(Dynamic) |
| DL/T 519 | 火力發電廠水處理用離子交換樹脂驗收標準 | () |
| DL/T 5193 | 環氧樹脂砂漿技術規程 | () |
| DL/T 673 | 火力發電廠水處理用001×7強酸性陽離子交換樹脂報廢標準 | () |
| DL/T 771 | 火電廠水處理用離子交換樹脂選用導則 | () |
| DL/T 772 | 火力發電廠水處理用離子交換樹脂標準工作交換容量測定方法 | () |
| DL/T 807 | 火力發電廠水處理用201×7強堿性陰離子交換樹脂報廢標準 | () |
| DL/T 953 | 水處理用強堿性陰離子交換樹脂耐熱性能測定方法 | () |
| FZ/T 01080 | 樹脂整理織物交聯程度的測定染色法 | () |
| FZ/T 50010.11 | 粘膠纖維用漿粕樹脂含量的測定 | () |
| FZ/T 50010.11 | 粘膠纖維用漿粕樹脂含量的測定 | () |
| FZ/T 64001 | 機織樹脂黑碳襯布 | () |
| FZ/T 64007 | 機織樹脂襯布 | Resin-finished interlinings of woven fabrics |
| GB 11115 | 低密度聚乙烯樹脂 | Low density polyethylene resin |
| GB 11116 | 高密度聚乙烯樹脂 | High density polyethylene resin |
| GB 11658 | 聚氯乙烯樹脂廠衛生防護距離標準 | Health protection zone standard for polyvinyl chloride resin plants |
| GB 12672 | 丙烯腈-丁二烯-苯乙烯(ABS)樹脂 | Acrylonitrile-butadiene-styrene (ABS) resin |
| GB 13114 | 食品容器及包裝材料用聚對苯二甲酸乙二醇酯樹脂衛生標準 | Hygienic standardfor polyethylene terephthalate resin used as food containers and packaging materials |
| GB 13115 | 食品容器及包裝材料用不飽和聚酯樹脂及其玻璃鋼制品衛生標準 | Hygienic standard for unsaturated polyester resin and glass fibre reinforced plastics used asfood containers and packaging materials |
| GB 13116 | 食品容器及包裝材料用聚碳酸酯樹脂衛生標準 | Hygienic standard for polycarbonate resin used as foodcontainers and packaging materials |
| GB 15204 | 食品容器、包裝材料用偏氯乙烯-氯乙烯共聚樹脂衛生標準 | Hygienic standardof vinylidene chloride-vinyl chloride copolymer resins for food containers andpackaging material |
| GB 16331 | 食品包裝材料用尼龍6樹脂衛生標準 | () |
| GB 17931 | 瓶用聚對苯二甲酸乙二醇酯(PET)樹脂 | Poly(ethylene terephthalate)(PET)resin for bottles |
| GB 4803 | 食品容器、包裝材料用聚氯乙烯樹脂衛生標準 | Hygienic standard for polyvinyl chloride resin used as food container and packaging material |
| GB 9686 | 食品容器內壁聚酰胺環氧樹脂涂料衛生標準 | Hygienic standard for polyamideepoxy resin used as internal coating of food container |
| GB 9691 | 食品包裝用聚乙烯樹脂衛生標準 | Hygienic standard for polyethylene resin used as food packaging material |
| GB 9692 | 食品包裝用聚苯乙烯樹脂衛生標準 | Hygienic standard for polystyrene resinused as food packaging material |
| GB 9693 | 食品包裝用聚丙烯樹脂衛生標準 | Hygienic standard for polypropyrene resinused as food packaging material |
| GB/T 11175 | 合成樹脂乳液試驗方法 | Testing methods for synthetic resin emulsions |
| GB/T 11991 | 離子交換樹脂轉型膨脹率測定方法 | () |
| GB/T 11992 | 氯型強堿性陰離子交換樹脂交換容量測定方法 | () |
| GB/T 12007.2 | 環氧樹脂鈉離子測定方法 | Epoxide resins--Determination of sodium ion |
| GB/T 12007.3 | 環氧樹脂總氯含量測定方法 | Epoxide resins--Determination of total chlorine content |
| GB/T 12007.6 | 環氧樹脂軟化點測定方法環球法 | Epoxide resins--Determination of softening point--Ring and ball method |
| GB/T 12007.7 | 環氧樹脂凝膠時間測定方法 | Determination of gelation time of epoxide resins |
| GB/T 12010.10 | 聚乙烯醇樹脂粒度測定方法 | Determination of particle size of polyvinyl alcohol resins |
| GB/T 12010.11 | 聚乙烯醇樹脂氫氧化鈉含量測定方法 | Determination of sodium hydroxide contents of polyvinyl alcohol resins |
| GB/T 12010.12 | 聚乙烯醇樹脂透明度測定方法 | Determination of transparency of polyvinyl alcohol resins |
| GB/T 12010.2 | 聚乙烯醇樹脂規格 | Polyvinyl alcohol resins--Specification |
| GB/T 12010.3 | 聚乙烯醇樹脂粘度測定方法 | Determination of viscocity of polyvinyl alcohol resins |
| GB/T 12010.4 | 聚乙烯醇樹脂揮發分測定方法 | Determination of volatile matter of polyvinyl alcohol resins |
| GB/T 12010.5 | 聚乙烯醇樹脂殘留乙酸根(或醇解度)測定方法 | Determination of residual acetic radical contents (or alcoholysis) of polyvinyl alcohol resins |
| GB/T 12010.6 | 聚乙烯醇樹脂乙酸鈉含量測定方法 | Determination of sodium acetate contents of polyvinyl alcohol resins |
| GB/T 12010.7 | 聚乙烯醇樹脂灰分測定方法 | Determination of ash content of polyvinyl alcohol resins |
| GB/T 12010.8 | 聚乙烯醇樹脂 pH 值測定方法 | Determination of pH of polyvinyl alcohol resins |
| GB/T 12010.9 | 聚乙烯醇樹脂平均聚合度測定方法 | Determination of average polymerizationdegree of polyvinyl alcohol resins |
| GB/T 12598 | 離子交換樹脂滲磨圓球率、磨后圓球率的測定 | Determination for sphericity of ion exchange resins after attrition or osmotic-attrition |
| GB/T 12670 | 聚丙烯(PP)樹脂 | () |
| GB/T 12671 | 聚苯乙烯(PS)樹脂 | () |
| GB/T 1303.2 | 電氣用熱固性樹脂工業硬質層壓板規范第3部分:單項材料規范第3篇:對三聚氰胺樹脂硬質層壓板的要求 | Specification for industrial rigid laminated sheetsbased on thermosetting resins for electrical purposes--Part 3:Specifications for individual materials--Sheet 3:Requirements for rigid laminated sheets based onmelamine resins |
| GB/T 13461 | 合成樹脂小腿假肢 | Synthetic resin blow knee prostheses |
| GB/T 13657 | 雙酚-A型環氧樹脂 | Bisphenol-A epoxy resins |
| GB/T 13659 | 聚氯乙烯糊用樹脂 | () |
| GB/T 14074 | 木材膠粘劑及其樹脂檢驗方法 | Testing methods for wood adhesives and their resins |
| GB/T 14354 | 玻璃纖維增強不飽和聚酯樹脂食品容器 | () |
| GB/T 14520 | 氣相色譜分析法測定不飽和聚酯樹脂增強塑料中的殘留苯乙烯單體含量 | Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas chromatography |
| GB/T 14590 | 鈕扣用液體不飽和聚酯樹脂 | Liquid unsaturated polyester resin for button |
| GB/T 14732 | 木材工業膠粘劑用脲醛、酚醛、三聚氰胺甲醛樹脂 | Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde resins |
| GB/T 15022 | 電氣絕緣無溶劑可聚合樹脂復合物定義和一般要求 | Definitions and general requirements for solventless polymerisable resinous compounds used for electrical insulation |
| GB/T 15022.2 | 電氣絕緣用樹脂基活性復合物 第2部分: 試驗方法 | Resin besed reactive compounds used for electrical insulation - Part 2: Methods of test |
| GB/T 15182 | 線型低密度聚乙烯樹脂 | Linear low density polyethylene resin |
| GB/T 15223 | 塑料 液體樹脂 用比重瓶法測定密度 | () |
| GB/T 15595 | 聚氯乙烯樹脂 熱穩定性試驗方法 白度法 | Polyvinyl chloride resins - Test methods for the thermal stability - Whiteness method |
| GB/T 15928 | 不飽和聚酯樹脂基增強塑料中殘留苯乙烯單體含量的測定 | () |
| GB/T 1630.1 | 塑料 環氧樹脂 第1部分：命名 | () |
| GB/T 1631 | 離子交換樹脂命名系統和基本規范 | () |
| GB/T 17417.1 | 稀土礦石化學分析方法陽離子交換樹脂分離富集電感耦合等離子體原子發射光譜法測定稀土分量 | Method for chemical analysis of rare earth ores--Determination of separated rare earth content--Preconcentration and separation by cationexchange resin，ICP-AES method |
| GB/T 18381 | 電工用熱固性樹脂工業硬質層壓板規范定義、命名和一般要求 | Specificationfor industrial rigid laminated sheets based on thermosetting resins for electrical purposes--Definitions，designations and general requirements |
| GB/T 1841 | 聚烯烴樹脂稀溶液粘度試驗方法 | Test method for the viscosity of the dilute solution of polyolefine resin |
| GB/T 19314.1 | 小艇艇體結構和構件尺寸第1部分:材料:熱固性樹脂、玻璃纖維增強塑料、基準層合板 | Small craft--Hull construction and scantlings--Part 1: Materials: Thermosetting resins，glass-fibre reinforcement，reference laminate |
| GB/T 19860 | 弱酸性陽離子交換樹脂氫型率測定方法 | Determination for hydrogen form of weak acid cation exchange resins |
| GB/T 19861 | 丙烯酸系陰離子交換樹脂強堿基團、弱堿基團和弱酸基團交換容量測定方法 | Determination for strong-base group,weak-base group and weak-acid group exchange capacity of acrylic type anion exchange resins |
| GB/T 20022 | 塑料氯乙烯均聚和共聚樹脂表觀密度的測定 | Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density |
| GB/T 21059 | 塑料 液態或乳液態或分散體系聚合物/樹脂 用旋轉黏度計在規定剪切速率下黏度的測定 | Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate |
| GB/T 21777 | 色漆和清漆用漆基 氯化聚合物樹脂 通用試驗方法 | () |
| GB/T 21843 | 塑料 氯乙烯均聚和共聚樹脂 用機械篩測定粒徑 | Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving |
| GB/T 21872 | 鑄造自硬呋喃樹脂用磺酸固化劑 | Sulphonic acid hardener for foundry no-bake furan resin |
| GB/T 21988 | 塑料 氯乙烯均聚和共聚樹脂 水中篩分析 | Plastics-Vinyl chloride homopolymer and copolymer resins-Sieve analysis in water |
| GB/T 21992 | 糊用聚氯乙烯樹脂 雜質與外來粒子數的測定 | Polyvinyl chloride resins for Paste - Determination of number of impurities particles and foreign particles |
| GB/T 21993 | 聚氯乙烯樹脂 甲醇或乙醇萃取物含量的測定 | Polyvinyl chloride resins - Determination of the content of methanol or ethanol extract |
| GB/T 22293 | 姜及其油樹脂 主要刺激成分測定 HPLC法 | () |
| GB/T 22314 | 塑料 環氧樹脂 黏度測定方法 | () |
| GB/T 2567 | 樹脂澆鑄體性能試驗方法 | () |
| GB/T 2576 | 纖維增強塑料樹脂不可溶分含量試驗方法 | Test method for insoluble matter content of resin rsed in fiber reinforced plastics |
| GB/T 2577 | 玻璃纖維增強塑料樹脂含量試驗方法 | Test method for resin content of glass fiber reinforced plastics |
| GB/T 2895 | 塑料 聚酯樹脂 部分酸值和總酸值的測定 | () |
| GB/T 2914 | 塑料 氯乙烯均聚和共聚樹脂 揮發物(包括水)的測定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) |
| GB/T 2915 | 聚氯乙烯樹脂水萃取物電導率的測定 | Determination of conductivity of water extract of poly(vinyl chloride) resins |
| GB/T 2916 | 塑料 氯乙烯均聚和共聚樹脂 用空氣噴射篩裝置的篩分析 | Plastic - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus |
| GB/T 3400 | 塑料通用型氯乙烯均聚和共聚樹脂室溫下增塑劑吸收量的測定 | Plastics--Homopolymer and copolymer resins of vinyl chloeride for general use--Determination of plasticizer absorption at room temperature |
| GB/T 3401 | 用毛細管黏度計測定聚氯乙烯樹脂稀溶液的黏度 | Determination of the viscosity of Poly(vinyl chloride) resins in dilute solution using capillary viscometers |
| GB/T 3402.1 | 塑料氯乙烯均聚和共聚樹脂第1部分：命名體系和規范基礎 | Plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations |
| GB/T 3855 | 碳纖維增強塑料樹脂含量試驗方法 | Test method for resin content of carbon fiber reinforced plastics |
| GB/T 4611 | 通用型聚氯乙烯樹脂“魚眼”的測定方法 | Determination method of "fish eyes"for polyvinyl chloride resins of general use |
| GB/T 4615 | 聚氯乙烯樹脂 殘留氯乙烯單體含量的測定 氣相色譜法 | Poly(vinyl chloride) - Determination of residual vinyl chloride monomer content - Gas chromatographic method |
| GB/T 4616 | 塑料 酚醛模塑料 丙酮可溶物（未模塑態材料的表觀樹脂含量）測定 | () |
| GB/T 4618.1 | 塑料 環氧樹脂氯含量的測定 第1部分：無機氯 | () |
| GB/T 4618.2 | 塑料 環氧樹脂氯含量的測定 第2部分：易皂化氯 | () |
| GB/T 5009.101 | 食品容器及包裝材料用聚酯樹脂及其成型品中銻的測定 | Determination of antimony in polyester resin and products for food containers and packaging materials |
| GB/T 5009.122 | 食品容器、包裝材料用聚氯乙烯樹脂及成型品中殘留1，1-二氯乙烷的測定 | Determination of residual ethylidene dichloride in polyvinyl chloride resin and product for food container and packaging material |
| GB/T 5009.125 | 尼龍6樹脂及成型品中己內酰胺的測定 | Determination of 6-caprolactam in nylon 6 resin and its products |
| GB/T 5009.127 | 食品包裝用聚酯樹脂及其成型品中鍺的測定 | Determination of germanium in polyester resin and products for food packaging |
| GB/T 5009.152 | 食品包裝用苯乙烯-丙烯腈共聚物和橡膠改性的丙烯腈-丁二烯-苯乙烯樹脂及其成型品中殘留丙烯腈單體的測定 | Determination of residual acrylonitrile monomer in styrene-acrylonitrile copolymers and rubber-modified acrylonitrile-butadiene-styrene resins and their products used for food packaging |
| GB/T 5009.166 | 食品包裝用樹脂及其制品的預試驗 | Preliminary test of resin and it’s products used as food packaging materials |
| GB/T 5009.58 | 食品包裝用聚乙烯樹脂衛生標準的分析方法 | Method for analysis of hygienicstandard of polyethylene resin for food packaging |
| GB/T 5009.59 | 食品包裝用聚苯乙烯樹脂衛生標準的分析方法 | Method for analysis of hygienic standard of polystyrene resin for food packaging |
| GB/T 5009.70 | 食品容器內壁聚酰胺環氧樹脂涂料衛生標準的分析方法 | Method for analysis of hygienic standard of epoxy coating for inner wall of food container |
| GB/T 5009.71 | 食品包裝用聚丙烯樹脂衛生標準的分析方法 | Method for analysis of hygienicstandard of polypropyrene resin for food packaging |
| GB/T 5009.98 | 食品容器及包裝材料用不飽和聚酯樹脂及其玻璃鋼制品衛生標準的分析方法 | Method for analysis of hygienic standard of unsatur-ated polyester resin and glass fibre reinforced plastics used as food containers and packaging materials |
| GB/T 5009.99 | 食品容器及包裝材料用聚碳酸酯樹脂衛生標準的分析方法 | Method for analysisof hygienic standard of polycarbonate resin used as food containers and packaging materials |
| GB/T 5019.6 | 以云母為基的絕緣材料 第6部分: 聚酯薄膜補強B階環氧樹脂粘合云母帶 | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder |
| GB/T 5130 | 電氣用熱固性樹脂工業硬質層壓板試驗方法 | Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose |
| GB/T 5206.2 | 色漆和清漆詞匯第二部分樹脂術語 | Paints and varnishes--Vocabulary--Part 2:Termin-ology of resins |
| GB/T 5475 | 離子交換樹脂取樣方法 | Methods for sampling ion exchange resins |
| GB/T 5476 | 離子交換樹脂預處理方法 | Methods for pretreating ion exchange resins |
| GB/T 5543 | 樹脂整理劑總甲醛含量、游離甲醛含量和羥甲基甲醛含量的測定 | Resin finishing agent―Determination total formaldehyde content、free formaldehyde content and methylol formadehyde contend |
| GB/T 5546 | 樹脂整理劑 不揮發組分的測定 | Resin finishing agent - Determination of the nonvolatile content |
| GB/T 5547 | 樹脂整理劑 黏度的測定 | Resin finishing agent - Determination of the viscosity |
| GB/T 5548 | 樹脂整理劑 加催化劑后溶液穩定性的測定 | Resin finishing agent - Determination of the sability of solution after adding catalyst |
| GB/T 5757 | 離子交換樹脂含水量測定方法 | () |
| GB/T 5758 | 離子交換樹脂粒度、有效粒徑和均一系數的測定 | Determination for particle size range，effective size and uniformity coefficient of ion exchange resins |
| GB/T 5759 | 氫氧型陰離子交換樹脂含水量測定方法 | Determination for water retention capacity of anion exchange resins in hydroxylic form |
| GB/T 5760 | 氫氧型陰離子交換樹脂交換容量測定方法 | Determination for exchange capacity of anion exchange resins in hydroxylic form |
| GB/T 5761 | 懸浮法通用聚氯乙烯樹脂 | Suspension polyvinyl chloride resins of general purpose |
| GB/T 6554 | 電氣絕緣用樹脂基反應復合物第2部分:試驗方法電氣用涂敷粉末方法 | Resin based reactive compounds used for electrical insulation--Part 2:Methods of test--Methods for coating pourders for electrical purposes |
| GB/T 6595 | 聚丙烯樹脂魚眼測試方法 | Test method for fish eye count of polypropyleneresin |
| GB/T 6691 | 樹脂整理劑 折射率的測定 | Resin finishing agent - Determination of refractive index |
| GB/T 6692 | 樹脂整理劑相對密度的測定 | Resin finishing agent―Determination of relative density |
| GB/T 6743 | 塑料用聚酯樹脂、色漆和清漆用漆基 部分酸值和總酸值的測定 | Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value |
| GB/T 7193 | 不飽和聚酯樹脂試驗方法 | () |
| GB/T 7193.7 | 液態不飽和聚酯樹脂顏色試驗方法 | Test method for colour of liquid unsaturated polyester resin |
| GB/T 7351 | 纖維級聚乙烯醇樹脂 | Polyvinyl alcohol resins for fibre grade |
| GB/T 7911 | 熱固性樹脂浸漬紙高壓裝飾層積板(HPL) | Decorative high-pressure laminates(HPL)--Sheets based on thermosetting resins |
| GB/T 8144 | 陽離子交換樹脂交換容量測定方法 | () |
| GB/T 8237 | 纖維增強塑料用液體不飽和聚酯樹脂 | Liquid unsaturated polyester resin for fiber reinforced plastics |
| GB/T 8330 | 離子交換樹脂濕真密度測定方法 | () |
| GB/T 8331 | 離子交換樹脂濕視密度測定方法 | () |
| GB/T 9348 | 塑料 聚氯乙烯樹脂 雜質與外來粒子數的測定 | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles |
| GB/T 9350 | 塑料氯乙烯均聚和共聚樹脂水萃取液pH值的測定 | Plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract |
| GB/T 9755 | 合成樹脂乳液外墻涂料 | Synthetic resin emulsion coatings for exterior wall |
| GB/T 9756 | 合成樹脂乳液內墻涂料 | Synthetic resin emulsion coatings for interior wall |
| HG/T 2002 | 涂料用過氯乙烯樹脂 | () |
| HG/T 2163 | 聚三氟氯乙烯樹脂 | () |
| HG/T 21638 | 樹脂整體地面通用圖 | () |
| HG/T 2164 | 液體和溶液狀酚醛樹脂粘度的測定 | () |
| HG/T 2166 | 預浸料樹脂含量試驗方法 | () |
| HG/T 2231 | 石油樹脂 | () |
| HG/T 2233 | 共聚甲醛樹脂 | () |
| HG/T 2345 | 鑄造樹脂用磺酸固化劑 | () |
| HG/T 2349 | 聚酰胺1010樹脂 | () |
| HG/T 2501 | 酚醛樹脂PH值的測定 | () |
| HG/T 2621 | 氣相色譜法測定酚醛樹脂中殘留苯酚含量 | () |
| HG/T 2622 | 酚醛樹脂中游離甲醛含量的測定 | () |
| HG/T 2623 | 三層混床專用離子交換樹脂 | () |
| HG/T 2624 | 聚碳酸酯樹脂 | () |
| HG/T 2625 | 環氧澆鑄樹脂線性收縮率的測定 | () |
| HG/T 2710 | 液體酚醛樹脂水混溶性的測定 | () |
| HG/T 2711 | 液體酚醛樹脂非揮發物的常規測定 | () |
| HG/T 2910-1997(2007) | 固體感光性樹脂凸版 | () |
| HG/T 3311 | 聚氯乙烯樹脂（懸浮法）熱穩定性測試方法 氯化氫水吸收法 | () |
| HG/T 3320 | 涂附磨具用水溶性酚醛樹脂膠粘劑 | () |
| HG/T 3791 | 氯乙烯-納米碳酸鈣原位聚合懸浮法聚氯乙烯樹脂 | () |
| HG/T 3792 | 交聯型氟樹脂涂料 | () |
| HG/T 3793 | 熱熔型氟樹脂（PVDF）涂料 | () |
| HG/T 3875 | 酚醛胺（PAA）環氧樹脂固化劑 | Phenol aldehyde amine epoxy resin firming agent |
| HG/T 3943 | 聚氯乙烯樹脂 甲苯含量的測定 | Poly(vinyl chloride)resin-Determination of toluene content |
| HG/T 3944 | 聚氯乙烯樹脂 金屬離子含量的測定 ICP法 | Poly(vinyl chloride) resin-Determination of metal ions contents-ICP method |
| HG/T 3946 | 聚氯乙烯樹脂 腈基團含量的測定 | Poly(vinyl chloride) resin-Determination of nitrile group content |
| HG/T 4009 | 瓦楞紙板印刷用柔性樹脂版 | () |
| HG/T 4076 | 本體法聚氯乙烯樹脂 | () |
| Hygienic standard of nylon 6 resins for food packaging material | 聚苯乙烯和丙烯腈-丁二烯-苯乙烯樹脂中殘留苯乙烯單體的測定氣相色譜法 | Determination of residual styrene monomer in polystyrene and acry-lonitrile-butadiene-styrene resins by gas chromatography |
| JB/T 10109 | 電氣絕緣用無溶劑可聚合樹脂復合物規范單項材料規范 不飽和聚酯浸漬樹脂 | () |
| JB/T 10322.1 | 電工用樹脂浸漬玻璃纖維網格 第1部分：定義和一般要求 | () |
| JB/T 10322.2 | 電工用樹脂浸漬玻璃纖維網格 第2部分：試驗方法 | () |
| JB/T 10322.3 | 電工用樹脂浸漬玻璃纖維網格 第3部分：單項材料規范環氧玻璃纖維網格 | () |
| JB/T 3631 | 普通磨具 樹脂重負荷磨削砂輪 | () |
| JB/T 3828 | 鑄造用熱芯盒樹脂 | () |
| JB/T 4175 | 固結磨具 纖維增強樹脂切割砂輪 | Bonded abrasive products-Resionoid bond fiber |
| JB/T 50172 | 樹脂磨具硬化爐能耗分等 | () |
| JB/T 6236.1 | 電工用樹脂浸漬玻璃纖維無緯綁扎帶 定義和一般要求 | () |
| JB/T 6236.2 | 電工用樹脂浸漬玻璃纖維無緯綁扎帶 試驗方法 | () |
| JB/T 6236.3 | 電工用樹脂浸漬玻璃纖維無緯綁扎帶 技術條件 | () |
| JB/T 6353 | 固結磨具 樹脂和橡膠薄片砂輪 | Bonded abrasive products-Resinoid and rubber bond flat grinding wheel |
| JB/T 7093 | 硅樹脂玻璃纖維自熄管 | () |
| JB/T 7526 | 鑄造用自硬呋喃樹脂 | () |
| JB/T 7831 | 額定電壓1kV（Um=1.2kV）到10kV（Um=12kV）電力電纜樹脂澆鑄式終端 | Cast resin terminations for power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) |
| JB/T 7832 | 額定電壓1kV（Um=1.2kV）到10kV（Um=12kV）電力電纜樹脂澆鑄式直通接頭 | Cast resin straight joints for power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) |
| JB/T 8496 | 樹脂砂再生成套裝置 技術條件 | () |
| JB/T 8497 | 碗形樹脂砂混砂機 技術條件 | () |
| JB/T 8498 | 螺旋葉片式樹脂砂連續混砂機 技術條件 | () |
| JB/T 8834 | 鑄造用殼型(芯)酚醛樹脂 | () |
| JC 552 | 纖維纏繞增強熱固性樹脂壓力管 | () |
| JC 561.1 | 增強用玻璃纖維網布 第1部分：樹脂砂輪用玻璃纖維網布 | () |
| JC/T 1015 | 環氧樹脂地面涂層材料 | Epoxy resin flooring coating |
| JC/T 1026 | 玻璃纖維增強熱固性樹脂承載型格柵 | Glass fiber reinforced thermosetting resin grating for supporting loads |
| JC/T 1041 | 混凝土裂縫用環氧樹脂灌漿材料 | Epoxy grouting resin for concrete crack |
| JC/T 1092 | 纖維增強塑料機械成型用不飽和聚酯樹脂 | () |
| JC/T 718-1990(1996) | 玻璃纖維增強聚酯樹脂耐磨蝕臥式容器 | () |
| JC/T 775 | 預浸料樹脂流動度試驗方法 | () |
| MT 146.1 | 樹脂錨桿 錨固劑 | () |
| MT 146.2 | 樹脂錨桿 金屬桿體及其附件 | () |
| prEN 10309 | 岸上和海上管路鋼管及配件 外表環氧樹脂粉末涂層 | Steel tubes and fittings for onshore and offshore pipelines - External epoxy powder coating |
| prEN 1796-3 | 有或無壓力供水用塑料管道系統聚合物樹脂（UP）基玻璃纖維增強熱固性塑料（GRP） 第3部分：管件 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 3: Fittings |
| QB 2506 | 光學樹脂眼鏡片 | () |
| QB/T 1331 | 制革用丙烯酸樹脂乳液 | () |
| QB/T 2223 | 制革用丙烯酸樹脂乳液測試方法 | () |
| QB/T 2506 | 光學樹脂眼鏡片 | () |
| QB/T 3637 | 不飽和聚酯樹脂鈕扣 | () |
| SH/T 1590 | 苯乙烯-丁二烯系列抗沖擊苯乙烯（SB）樹脂 | () |
| SH/T 1761.1 | 聚丙烯樹脂粉料 第1部分：間歇法 | () |
| SY/T 0323 | 玻璃纖維增強熱固性樹脂壓力管道施工及驗收規范 | () |
| SY/T 5094 | 鉆井液用磺甲基酚醛樹脂 | () |
| SY/T 6572 | 防砂用樹脂性能評價方法 | () |
| YB/T 165-1999(2006年確認) | 樹脂結合鋁鎂碳磚 | () |
| YB/T 4131 | 耐火材料用酚醛樹脂 | () |
| YB/T 5093 | 固體古馬隆-茚樹脂 | () |
| YB/T 5094 | 固體古馬隆-茚樹脂外觀顏色測定方法 | () |
| YB/T 5095 | 固體古馬隆-茚樹脂酸堿度測定方法 | () |
| YBJ 215 | 土壤中鈾的測定CL-5209 萃淋樹脂分離2-(5-溴-2-吡啶偶氮)-5-二乙氨基苯酚分光光度法 | Determination of uranium in soil--CL-5209 extractant-containing resin separation 2-(5-bromo-2-pyridylazo)-5-diethlaminophenol spectrophotometry |
| 編號 | 中文名稱 | 英文名稱 |