微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 1041 | 廠商提供的醫療設備信息 | Information supplied by the manufacturer with medical devices |
| EN 1169 | 預制混凝土制品 玻璃纖維增強水泥廠生產控制的一般規則 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement |
| EN 12255-1 | 廢水處理廠 第1部分：一般建造原則 | Wastewater treatment plants - Part 1: General construction principles |
| EN 12255-10 | 廢水處理廠 第10部分：安全規則 | Wastewater treatment plants - Part 10: Safety principles |
| EN 12255-11 | 廢水處理廠 第11部分：一般要求的數據 | Wastewater treatment plants - Part 11: General data required |
| EN 12255-12 | 廢水處理廠 第12部分：控制和自動化 | Wastewater treatment plants - Part 12: Control and automation |
| EN 12255-13 | 廢水處理廠 第13部分：化學處理 通過沉淀/絮凝作用除理廢水 | Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/flocculation |
| EN 12255-3-2000+AC | 廢水處理廠 第3部分：預處理 | Wastewater treatment plants - Part 3: Preliminary treatment |
| EN 12255-4 | 廢水處理廠 第4部分：初級沉降 | Wastewater treatment plants - Part 4: Primary settlement |
| EN 12255-5 | 廢水處理廠 第5部分：沉淀池處理 | Wastewater treatment plants - Part 5: Lagooning processes |
| EN 12255-6 | 廢水處理廠 第6部分：活性污泥處理 | Wastewater treatment plants - Part 6: Activated sludge process |
| EN 12255-7 | 廢水處理廠 第7部分：生物固定膜反應器 | Wastewater treatment plants - Part 7: Biological fixed-film reactors |
| EN 12255-8 | 廢水處理廠 第8部分： 污泥處理和存貯 | Wastewater treatment plants - Part 8: Sludge treatment and storage |
| EN 12255-9 | 廢水處理廠 第9部分：氣味控制和通風 | Wastewater treatment plants - Part 9: Odour control and ventilation |
| EN 12285-1 | 工廠預制鋼罐 第1部分：易燃和不易燃的水污染液體地下儲存用臥式圓柱形單層和雙層鋼罐 | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| EN 1279-6 | 建筑玻璃 隔離玻璃裝置 第6部分：工廠生產控制及周期試驗 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
| EN 12919 | 工廠環境 體積流速大于5L/min的化學藥劑采樣泵 要求與試驗方法 | Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
| EN 12976-1 | 太陽能系統及構件 工廠預制系統 第1部分：一般要求 | Thermal solar systems and components - Factory made systems - Part 1: General requirements |
| EN 12976-2 | 太陽能系統及構件 工廠預制系統 第2部分：試驗方法 | Thermal solar systems and components - Factory made systems - Part 2: Test methods |
| EN 13098 | 工廠環境 空中微生物和空中毒素的測量準則 | Workplace atmospheres - Guidelines for measurement of airborne micro-organisms and endotoxin |
| EN 13162 | 建筑物保溫制品 工廠預制石棉（MW）制品 規范 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| EN 13163 | 建筑物保溫制品 工廠預制多孔聚苯乙烯（EPS）制品 規范 | Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification |
| EN 13164 | 建筑物保溫制品 工廠預制擠壓泡沫塑料（XPS）制品 規范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification |
| EN 13165 | 建筑物保溫制品 工廠預制剛性聚氨酯泡沫（PUR）制品 規范 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification |
| EN 13166 | 建筑物保溫制品 工廠預制酚醛泡沫（PF）制品 規范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification |
| EN 13167 | 建筑物保溫制品 工廠預制泡沫玻璃（CG）制品 規范 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| EN 13168 | 建筑物保溫制品 工廠預制刨花（WW）制品 規范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| EN 13169 | 建筑物保溫制品 工廠預制多孔珍珠巖（EPB）制品 規范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification |
| EN 13170 | 建筑物保溫制品 工廠預制多孔軟木（ICB）制品 規范 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| EN 13171 | 建筑物保溫制品 工廠預制木質纖維（WF）制品 規范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| EN 13205 | 工廠環境 空氣粒子濃度測定儀性能評估 | Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
| EN 13212 | 路標材料 工廠生產控制 | Road marking materials - Requirements for the factory production control |
| EN 13890 | 工廠環境 空氣粒子中金屬和類金屬的測量程序 要求和試驗方法 | Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
| EN 1620 | 生物技術 大規模加工和生產 依照危害程度的工廠建造 | Biotechnology - Large-scale process and production - Plant building according to the degree of hazard |
| EN 2000 | 航空航天系列 質量保證 EN航空航天產品 制造廠商質量體系的批準 | Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| EN 326-2 | 木基板 取樣、剪切和檢驗 第2部分：工廠中的質量控制 | Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory |
| EN 50065-2-3 | 頻率范圍為3kHz-148.5kHz的低壓電氣設備的信號裝置 第2-3部分：主通信設備頻率范圍為95kHz-148.5kHz以及計 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by el |
| EN 61000-2-4 | 電磁兼容性(MEC) 第2-4部分：環境 工廠中低頻傳導騷擾的兼容性水平 | Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances (IEC 61000-2-4:2002) / Note: Endorsement notice |
| EN 61181 | 浸漬絕緣材料 溶解氣體分析(DGA)應用于電氣設備的工廠試驗 | Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993) |
| EN 61355 | 工廠、系統和設備用文件的分類及代碼 | Classification and designation of documents for plants, systems and equipment (IEC 61355:1997) |
| EN 61660-1 | 電廠和變電站直流輔助設施中的短路電流 第1部分：短路電流的計算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents (IEC 61660-1:1997) |
| EN 61660-2 | 電廠和變電站直流輔助設施中的短路電流 第2部分：效應計算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects (IEC 61660-2:1997) |
| EN 710 | 鑄模、制蕊機械、工廠及相關設備的安全要求 | Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment |
| EN ISO 13705 | 石油和天然氣工業 一般煉油廠的燒火的加熱器 | Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001) |
| EN ISO 5667-13 | 水質 采樣 第13部分：生活污水和水處理廠污水采樣指南 | Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997) |
| prEN 12255-14 | 廢水處理廠 第14部分：消毒 | Wastewater treatment plants - Part 14: Disinfection |
| prEN 12255-15 | 廢水處理 廠 第15部分：活性污泥曝氣池中清水中氧傳送的測量 | Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in activated sludge aeration tanks |
| prEN 12255-2 | 廢水處理廠 第2部分：生廢水泵送裝置的性能要求 | Wastewater treatment plants - Part 2: Performance requirements of raw wastewater pumping installations |
| prEN 12271-10 | 地面修整 規范 第10部分：工廠生產控制 | Surface dressing - Specifications - Part 10: Factory production control |
| prEN 12285-2 | 工廠預制金屬罐 第2部分：用于地下貯存易燃和不易燃水污染液的柱形單層皮和雙層皮臥式罐 | Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| prEN 12411-1 | 工廠環境 直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第1部分：一般要求和試驗方法 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods |
| prEN 12411-2 | 工廠環境 直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第2部分：用于測量極限值范圍內濃度的設 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the range of limit values |
| prEN 12411-4 | 工作場所的氣體 工廠環境 直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第4部分：選擇、安裝、 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance |
| prEN 12873-1 | 材料對人類生活用水的影響 流動產生的影響 第1部分：非粘結性工廠預制品試驗方法 | Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products |
| prEN 13108-10 | 瀝青混合物 質量 第10部分：工廠生產控制 | Bituminous mixtures - Quality - Part 10: Factory production control |
| prEN 14081-3 | 木結構 具有矩形截面的按強度分級的結構用木材 第3部分：機械級配 工廠生產管理的附加要求 | Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading - Additional requirements for factory production control |
| prEN 14303 | 工業裝置和建筑設備用熱絕緣產品 工廠制礦棉產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| prEN 14304 | 工業裝置和建筑設備用熱絕緣產品 工廠制柔性人造橡膠泡沫產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| prEN 14305 | 工業裝置和建筑設備用熱絕緣產品 工廠制蜂窩玻璃產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| prEN 14306 | 工業裝置和建筑設備用熱絕緣產品 工廠制硅酸鈣產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
| prEN 14307 | 工業裝置和建筑設備用熱絕緣產品 工廠制擠壓聚苯乙烯泡沫產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
| prEN 14308 | 工業裝置和建筑設備用熱絕緣產品 工廠制硬質聚氨基甲酸乙酯泡沫和聚異氰尿酸酯泡沫產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| prEN 14309 | 工業裝置和建筑設備用熱絕緣產品 工廠制膨脹聚氯乙烯產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| prEN 14313 | 工業裝置和建筑設備用隔熱產品 工廠制聚乙烯泡沫產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| prEN 14314 | 工業裝置和建筑設備用熱絕緣產品 工廠制酚醛泡沫產品 規范 | Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification |
| prEN 14440 | 灰漿路面層 工廠生產控制 | Slurry surfacing - Factory production control |
| prEN 2000 | 航空航天系列 質量保證 EN航空航天產品 制造廠商質量體系批準 | Aerospace series - quality assurance - EN aerospace products - Approval of the quality systems of manufacturers |
| prEN 61660-3 | 電廠和變電站直流輔助設施中的短路電流 第3部分：計算舉例 | IEC 61660-3: Short-circuit currents in DC auxiliary installations in power plants and substations - Part 3: Examples of calculation |
| prEN 62270 | 用于水利發電廠自動化的計算機控制的IEEE指南 | IEEE Guide for computer-based control for hydroelectric power plant automation |
| 編號 | 中文名稱 | 英文名稱 |