微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 10257-1 | 動力電纜或通信電纜鎧甲用鍍鋅或鋅合金的非合金鋼電線 第1部分：地面電纜 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| EN 10257-2 | 動力電纜或通信電纜鎧甲用鍍鋅或鋅合金的非合金鋼電線 第2部分：海底電纜 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| EN 12548 | 鉛和鉛合金 電纜鈹和護套用鉛合金鑄錠 | Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
| EN 12613 | 具有可視特性的地下電纜和管線用塑料報警裝置 | Plastics warning devices for underground cables and pipelines with visual characteristics |
| EN 175500 | 分規范：包括批準和能力批準的連接器用電纜引出端附件 | Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval |
| EN 187105 | 單模光纖電纜(管道/直埋安裝) | Single mode optical cable (duct/direct buried installation) |
| EN 2083 | 航空航天系列 電纜用銅和銅合金導體 產品標準 | Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard |
| EN 2355 | 航空航天系統 控制電纜用耐腐蝕鋼的螺紋叉形端 尺寸和負載 | Aerospace series - Fork-ends, threaded, control cable in corrosion resisting steel; Dimensions and loads |
| EN 2591-610 | 航空航天系列 光電連接元件 試驗方法 第610部分：光學元件 電纜附件的效能 電纜拉力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 610: Optical elements; Effectiveness of cable attachment; Cable pulling |
| EN 2591-611 | 航空航天系列 光電連接元件 試驗方法 第611部分：光學元件 電纜附件的效能 電纜扭力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 611: Optical elements; Effectiveness of cable attachment; Cable torsion |
| EN 2591-612 | 航空航天系列 光電連接元件 試驗方法 第612部分：光學元件 電纜附件的效能 電纜軸向壓力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression |
| EN 300429 V 1.2.1 | 數字視頻廣播（DVB） 電纜系統用構架結構、頻道編碼和調制 | Digital Video Broadcasting (DVB) - Framing structure, channel coding and modulation for cable systems |
| EN 3475-100 | 航空航天系列 飛行器用的電纜 試驗方法 第100部分：總則 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General |
| EN 3475-201 | 航空航天系列 飛行器用的電纜 試驗方法 第201部分：可視檢查／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-202 | 航空航天系列 飛行器用的電纜 試驗方法 第202部分：質量／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-301 | 航空航天系列 飛行器用的電纜 試驗方法 第301部分：每單位長度的歐母電阻／注：適合與EN 3475-100結合使 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Ohmic resistance per unit length / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-302 | 航空航天系列 飛行器用的電纜 試驗方法 第302部分：電壓校檢試驗／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-303 | 航空航天系列 飛行器用的電纜 試驗方法 第303部分：絕緣電阻／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-304 | 航空航天系列 飛行器用的電纜 試驗方法 第304部分：表面電阻／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-305 | 航空航天系列 飛行器用的電纜 試驗方法 第305部分：過載電阻／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-401 | 航空航天系列 飛行器用的電纜 試驗方法 第401部分：加速老化／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-402 | 航空航天系列 飛行器用的電纜 試驗方法 第402部分：收縮和脫層／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-403 | 航空航天系列 飛行器用的電纜 試驗方法 第403部分：脫層和阻塞／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-404 | 航空航天系列 飛行器用的電纜 試驗方法 第404部分：熱沖擊／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-405 | 航空航天系列 飛行器用的電纜 試驗方法 第405部分：環境溫度下的彎曲／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-406 | 航空航天系列 飛行器用的電纜 試驗方法 第406部分：冷彎試驗／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-407 | 航空航天系列 飛行器用的電纜 試驗方法 第407部分：可燃性／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-409 | 航空航天系列 飛行器用的電纜 試驗方法 第409部分：真空老化／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-410 | 航空航天系列 飛行器用的電纜 試驗方法 第410部分：耐熱性／注：適合與EN 3475-100和 ASTM D 3032 (1986 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 14 |
| EN 3475-412 | 航空航天系列 飛行器用的電纜 試驗方法 第412部分：防潮性能 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance |
| EN 3475-413 | 航空航天系列 飛行器用的電纜 試驗方法 第414部分：纏繞反向測試 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test |
| EN 3475-501 | 航空航天系列 飛行器用的電纜 試驗方法 第501部分：動態切口／注：適合與EN 3475-100和 ASTM D 3032 (19 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic out-through / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 22 |
| EN 3475-502 | 航空航天系列 飛行器用的電纜 測試方法 第502部分：切口擴散／注：適合與EN 3475-100 結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-503 | 航空航天系列 飛行器用的電纜 測試方法 第503部分：擦傷磨損／注：適合與EN 3475-100 結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-504 | 航空航天系列 飛行器用的電纜 測試方法 第504部分：扭轉／注：適合與EN 3475-100 結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-505 | 航空航天系列 飛行器用的電纜 測試方法 第505部分：導線和絞線的拉伸試驗／注：適合與EN 3475-100結合使 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-506 | 航空航天系列 飛行器用的電纜 測試方法 第506部分：電鍍連續性／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuity / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-507 | 航空航天系列 飛行器用的電纜 測試方法 第507部分：絕緣層與導體間的剝離性及粘附力／注：適合與EN 3475 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Strippability and adherence of insulation to the conductor / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-508 | 航空航天系列 飛行器用的電纜 測試方法 第508部分：電鍍厚度 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness |
| EN 3475-509 | 航空航天系列 飛行器用的電纜 測試方法 第509部分：軟焊性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability |
| EN 3475-510 | 航空航天系列 飛行器用的電纜 測試方法 第510部分：鎧裝和包皮材料、抗張強度和擠壓絕緣層的伸張度 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material |
| EN 3475-511 | 航空航天系列 飛行器用的電纜 試驗方法 第511部分：電纜與電纜磨損 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion |
| EN 3475-512 | 航空航天系列 飛行器用的電纜 試驗方法 第512部分：耐彎曲性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance |
| EN 3475-603 | 航空航天系列 飛行器用的電纜 試驗方法 第603部分：抗?jié)窕≤壽E性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking |
| EN 3475-604 | 航空航天系列 飛行器用的電纜 試驗方法 第604部分：抗干弧擴展性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation |
| EN 3475-605 | 航空航天系列 飛行器用的電纜 試驗方法 第605部分：濕短路試驗 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test |
| EN 3475-701 | 航空航天系列 飛行器用的電纜 試驗方法 第701部分：絕緣層與導體間的剝離性和粘附力／注：適合與EN 3475 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippability / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-702 | 航空航天系列 飛行器用的電纜 試驗方法 第702部分：屏蔽抗沖擊能力／注：適合與EN 3475-100結合使用 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-703 | 航空航天系列 飛行器用的電纜 試驗方法 第703部分：制造商標記的持久性／注：適合與EN 3475-100結合使 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturers marking / Note: Applies only in conjunction with EN 3475-100 |
| EN 3475-704 | 航空航天系列 飛行器用的電纜 試驗方法 第704部分：柔性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility |
| EN 3475-705 | 航空航天系列 飛行器用的電纜 試驗方法 第705部分：對比測量 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 705: Contrast measurement |
| EN 3475-801 | 航空航天系列 飛行器用的電纜 試驗方法 第801部分：每單位長度電容 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length |
| EN 3475-802 | 航空航天系列 飛行器用的電纜 試驗方法 第802部分：非平衡電容 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance |
| EN 3475-803 | 航空航天系列 飛行器用的電纜 試驗方法 第803部分：可變電容 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation |
| EN 3475-804 | 航空航天系列 飛行器用的電纜 試驗方法 第804部分：傳播速度 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of progagation |
| EN 3475-805 | 航空航天系列 飛行器用的電纜 試驗方法 第805部分：阻抗特征 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance |
| EN 3475-806 | 航空航天系列 飛行器用的電纜 試驗方法 第806部分：衰減 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation |
| EN 3475-807 | 航空航天系列 飛行器用的電纜 試驗方法 第807部分：傳輸阻抗 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance / Note: Applies in conjunction with EN 3475-100 (2002-02) |
| EN 3475-808 | 航空航天系列 飛行器用的電纜 試驗方法 第808部分：串音 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk / Note: Applies in conjunction with EN 3475-100 (2002-02) |
| EN 3745-205 | 航空航天系列 航空用光纜和光纖 試驗方法 第205部分：電纜縱向尺寸的穩定性 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability |
| EN 3745-511 | 航空航天系列 航空用光纜和光纖 試驗方法 第511部分：電纜間磨損 | Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion |
| EN 50083-1-1993+A1 -1997+A2 | 電視和聲音信號及交互式服務用電纜網絡 第1部分：安全要求 | Cable networks for television signals, sound signals and interactive services - Part 1: Safety requirements |
| EN 50083-10 | 電視和聲音信號及交互式服務用電纜分配系統 第10部分：回程線路系統性能 | Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths |
| EN 50083-2 | 電視和聲音信號及交互式服務用電纜網絡 第2部分：設備的電磁兼容性 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| EN 50083-3 | 電視和聲音信號及交互式服務用電纜網絡 第3部分：共軸電纜網絡的活力寬譜帶設備 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for coaxial cable networks |
| EN 50083-4 | 電視和聲音信號及交互式服務用電纜網絡 第4部分：共軸電纜網絡的無源寬譜帶設備 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 50083-5 | 電視和聲音信號及交互式服務用電纜網絡 第5部分：起點設備 | Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
| EN 50083-6 | 電視和聲音信號及交互式服務用電纜網絡 第6部分：光學設備 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| EN 50083-7-1996+A1 | 電視和聲音信號及交互式服務用電纜網絡 第7部分：系統性能 | Cable networks for television signals, sound signals and interactive services - Part 7: System performance |
| EN 50083-8 | 電視和聲音信號及交互式服務用電纜網絡 第8部分：網絡的電磁兼容性 | Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks |
| EN 50083-9 | 電視和聲音信號及交互式服務用電纜網絡 第9部分：DVB/MPEG-2-傳輸電流用 CATV-/SMATV端點和類似專業設備 | Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| EN 50085-1-1997+A1 | 電氣裝置用電纜槽和電纜管道系統 第1部分：一般要求 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
| EN 50085-1/prA2 | 電氣裝置用電纜槽和電纜管道系統 第1部分：一般要求 修改PrA2 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A2 |
| EN 50085-2-3 | 電氣裝置用電纜槽和電纜管道系統 第2-3部分：箱式設備用有槽電纜槽系統的特殊要求 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
| EN 50086-1 | 電纜裝置用導管系統 第1部分：一般要求 | Conduit systems for cable management - Part 1: General requirements |
| EN 50086-2-1-1995 +A11 | 電纜裝置用導管系統 第2-1部分：剛性導管系統的特殊要求 | Conduit systems for cable management - Part 2-1: Particular requirements for rigid conduit systems |
| EN 50086-2-2-1995 +A11 | 電纜裝置用導管系統 第2-2部分：可彎曲導管系統的特殊要求 | Conduit systems for cable management - Part 2-2: Particular requirements for pliable conduit systems |
| EN 50086-2-3-1995 +A11 | 電纜裝置用導管系統 第2-3部分：柔性導管系統的特殊要求 | Conduit systems for cable management - Part 2-3: Particular requirements for flexible conduit systems |
| EN 50086-2-4-1994 +A1 | 電纜裝置用導管系統 第2-4部分：地下導管系統的特殊要求 | Conduit systems for cable management - Part 2-4: Particular requirements for conduit systems buried underground |
| EN 50098-1-1998+A1 | 信息技術用建筑群中電纜敷設 第1部分：ISDN基本存取 | Customer premises cabling for information technology - Part 1: ISDN basic access |
| EN 50098-2 | 建筑群中信息技術用電纜敷設 第2部分：千字節/秒ISDN初級多路傳送連接和租用專線網絡接口 | Customer premises cabling for information technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface |
| EN 50109-1 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第1部分：一般要求和試驗 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests |
| EN 50109-2-1 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-1部分：射頻連接器和同軸接觸器的手工壓接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with fixed dies,sies A to E,V and W |
| EN 50109-2-2 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-2部分：射頻連接器和同軸接觸器的手動壓接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removadle and inter-changeadle dies,size A to G,Q to T,V and W |
| EN 50109-2-3 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-3部分：電器插接連接件觸點的特殊要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
| EN 50109-2-4 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-4部分：SMZ系列高頻插接連接的中間接點的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ |
| EN 50109-2-5 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-5部分：數據總線用帶2個內芯的電纜連接的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| EN 50117-1 | 同軸電纜 第1部分：通用規范 | Coaxial cables - Part 1: Generic specification / Note: Applies only in conjunction with EN 50290-1-1 |
| EN 50117-2-1 | 同軸電纜 第2-1部分：電纜配電網使用的電纜的分規范 5 MHz 至1000 MHz操作系統使用的室內電壓降電纜 | Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks; Indoor drop cables for systems operating at 5 MHz - 1000 MHz / Note: Applies only in conjunction with EN 50117-1 |
| EN 50117-3-1 | 同軸電纜 第3-1部分：電信設備用電纜的分規范 數字通信系統用小型電纜 | Coaxial cables - Part 3-1: Sectional specifications for cables used in telecom applications; Miniaturized cables used in digital communication systems / Note: Applies only in conjunction with EN 50117-1 |
| EN 50117-3 | 電纜配電設備用同軸電纜 第3部分：用戶室外引入電纜用分規范 | Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables |
| EN 50117-4 | 電纜配電設備用同軸電纜 第4部分：配電器和線路電纜用分規范 | Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables |
| EN 50117-5 | 電纜配電網絡用同軸電纜 第5部分：用在頻率在5MHz至2150MHz之間網絡操作用室內分接電纜分規范 | Coaxial cables used in cabled distribution networks - Part 5: Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
| EN 50117-6 | 電纜配電網絡用同軸電纜 第6部分：用于頻率在5MHz-2150MHz之間網絡操作用室外分接電纜分規范 | Coaxial cables used in cabled distribution networks - Part 6: Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
| EN 50143-1997+A1 | 無荷載額定輸出電壓大于1KV小于10KV的標志燈和氣體放電管裝置用電纜 | Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| EN 50146 | 電力設備用電纜線 | Cable ties for electrical installations |
| EN 50173-1 | 信息技術 普通電纜系統 第1部分：一般要求和辦公區 | Information technology - Generic cabling systems - Part 1: General requirements and office areas |
| EN 50174-1 | 信息技術 鋪設電纜裝置 第1部分：規范和質量保證 | Information technology - Cabling installation - Part 1: Specification and quality assurance |
| EN 50174-2 | 信息技術 鋪設電纜裝置 第2部分：建筑物內部設施安裝的規劃及實踐 | Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings |
| EN 50182 | 用于過熱總線的導體 圓形同軸多股電纜芯線的導體 | Conductors for overhead lines - Round wire concentric lay stranded conductors / Note: Includes Corrigendum of July 2001 |
| EN 50200 | 用于緊急線路的非保護型小電纜的耐火性試驗方法 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| EN 50214 | 升降機用柔軟電纜 | Flexible cables for lifts |
| EN 50249 | 地下管道和電纜的定位器 性能與安全 | Electromagnetic locators for buried pipes and cables - Performance and safety |
| EN 50262-1998+A1 | 電氣設備用米制電纜密封裝置 | Metric cable glands for electrical installations |
| EN 50264-1 | 鐵路應用 具有特殊放火性能的鐵路機車車輛電纜 標準外壁 第1部分：基本要求 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 1: General requirements |
| EN 50264-2 | 鐵路應用 具有特殊放火性能的鐵路機車車輛電纜 標準外壁 第2部分：?jiǎn)涡倦娎| | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 2: Single core cables |
| EN 50264-3 | 鐵路應用 具有特殊放火性能的鐵路機車車輛電纜 標準外壁 第3部分：多芯電纜 | Railway applications - Railway rolling stock cables having special fire performance; Standard wall - Part 3: Multicore cables |
| EN 50265-1 | 在著火條件下電纜的一般測試方法 單個絕緣導體或電纜耐火焰垂直傳播試驗 第1部分：裝置 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1: Apparatus |
| EN 50265-2-1 | 在著火條件下電纜的一般測試方法 單個絕緣導體或電纜耐火焰垂直傳播試驗 第2-1部分：方法 1kW預混火焰 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - 1 kW pre-mixed flame |
| EN 50265-2-2 | 在著火條件下電纜的一般測試方法 單個絕緣導體或電纜耐火焰垂直傳播試驗 第2-2部分：方法 擴散火焰 | Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 2: Procedures - Diffusion flame |
| EN 50266-1 | 在著火條件下電纜的一般測試方法 分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗 第1部分：裝置 | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Apparatus |
| EN 50266-2-1 | 在著火條件下電纜的一般測試方法 分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗 第2-1部分：程序 A | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1: Procedures; Category A F/R / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-2 | 在著火條件下電纜的一般測試方法 分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗 第2-2部分：程序 A | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: Procedures; Category A / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-3 | 在著火條件下電纜的一般測試方法 分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗 第2-3部分：程序 B | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures - Category B / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-4 | 在著火條件下電纜的一般測試方法 分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗 第2-4部分：程序 C | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures; Category C / Note: Includes Corrigendum of March 2002 |
| EN 50266-2-5 | 在著火條件下電纜的一般測試方法 分布在垂直安裝的膠合線或電纜四周的垂直火焰的試驗 第2-5部分：程序 D | Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-5: Procedures; Small cables; Category D / Note: Includes Corrigendum of March 2002 |
| EN 50267-1 | 在著火條件下電纜的一般測試方法 電纜材料燃燒過程中放出氣體的試驗 第1部分：裝置 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
| EN 50267-2-1 | 在著火條件下電纜的一般測試方法 電纜材料燃燒過程中放出氣體的試驗 第2-1部分：程序 氫鹵酸氣體量的測 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
| EN 50267-2-2 | 在著火條件下電纜的一般測試方法 電纜材料燃燒過程中放出氣體的試驗 第2-2部分：程序 通過測量 pH 值和 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| EN 50267-2-3 | 在著火條件下電纜的一般測試方法 電纜材料燃燒過程中放出氣體的試驗 第2-3部分：程序 通過測量 pH 值和 | Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity Partly Supersedes HD602S1:1992 |
| EN 50268-1 | 在燃燒條件下電纜的一般試驗方法 在規定條件下電纜燃燒煙密度測量 第1部分：儀器 | Common test methods for cable under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus |
| EN 50268-2 | 在燃燒條件下電纜的一般試驗方法 在規定條件下電纜燃燒煙密度測量 第2部分：程序 | Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure |
| EN 50288-1 | 模擬和數字通信和管理中使用的多元金屬電纜 第1部分：通用規范 | Multi-element metallic cables use in analogue and digital communication and control - Part 1: Generic specification |
| EN 50288-2-1 | 模擬和數字通信和管理中使用的多元金屬電纜 第2-1部分：表征100 MHz以上的屏蔽電纜的部分規范 水平及建筑 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterized up to 100 MHz; Horizontal and building backbone cables |
| EN 50288-2-2 | 電纜和數字通信和管理中用的多芯金屬電纜 第2-2部分：特征頻率達100 MHz屏蔽電纜的部分規范 工作區和中繼 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz; Work area and patch cord cables |
| EN 50288-3-1 | 模擬和數字通信和管理中使用的多元金屬電纜 第3-1部分：表征100 MHz以上的未屏蔽電纜的部分規范 水平及建 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterized up to 100 MHz; Horizontal and building backbone cables |
| EN 50288-3-2 | 模擬和數字通信和管理中使用的多元金屬電纜 第3-2部分：表征100 MHz以上的未屏蔽電纜的部分規范 工作區和 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterized up to 100 MHz; Work area and patch cord cables |
| EN 50288-4-1 | 模擬和數字通信和管理中使用的多元金屬電纜 第4-1部分：表征600 MHz以上的屏蔽電纜的部分規范 水平及建筑 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterized up to 600 MHz; Horizontal and building backbone cables |
| EN 50288-4-2 | 模擬和數字通信和管理中使用的多元金屬電纜 第4-2部分：表征600 MHz以上的屏蔽電纜的部分規范 工作區和局 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterized up to 600 MHz; Work area and patch cord cables |
| EN 50289-1-1 | 通信電纜 試驗方法規范 第1-1部分：電氣試驗方法 基本要求 | Communication cables - Specifications for test methods - Part 1-1: Electrical test methods; General requirements |
| EN 50289-1-10 | 通信電纜 試驗方法規范 第1-10部分：電氣試驗方法 串音 | Communication cables - Specifications for test methods - Part 1-10: Electrical test methods; Crosstalk / Note: Applies only in conjunction with EN 50289-1-1 |
| EN 50289-1-11 | 通信電纜 試驗方法規范 第1-11部分：電氣試驗方法 特征阻抗 輸入阻抗 回波損耗 | Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss / Note: Applies only in conjunction with EN 50289-1-1 |
| EN 50289-1-2 | 通信電纜 試驗方法規范 第1-2部分：電氣試驗方法 DC電阻 | Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance |
| EN 50289-1-3 | 通信電纜 試驗方法規范 第1-3部分：電氣試驗方法 絕緣強度 | Communication cables - Specifications for test methods - Part 1-3: Electrical test methods; Dielectric strength |
| EN 50289-1-4 | 通信電纜 試驗方法規范 第1-4部分：電氣試驗方法 絕緣電阻 | Communication cables - Specifications for test methods - Part 1-4: Electrical test methods; Insulation resistance / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-5 | 通信電纜 試驗方法規范 第1-5部分：電氣試驗方法 電容 | Communication cables - Specifications for test methods - Part 1-5: Electrical test methods; Capacitance / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-6 | 通信電纜 試驗方法規范 第1-6部分：電氣試驗方法 電磁性能 | Communication cables - Specifications for test methods - Part 1-6: Electrical test methods; Electromagnetic performance / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-7 | 通信電纜 試驗方法規范 第1-7部分：電氣試驗方法 傳播速度 | Communication cables - Specifications for test methods - Part 1-7: Electrical test methods; Velocity of propagation / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-8 | 通信電纜 試驗方法規范 第1-8部分：電氣試驗方法 衰減 | Communication cables - Specifications for test methods - Part 1-8: Electrical test methods - Attenuation / Note: Applies in conjunction with EN 50289-1-1 |
| EN 50289-1-9 | 通信電纜 試驗方法規范 第1-9部分：電氣試驗方法 衰減不平衡（縱向轉換損失、縱向轉換傳遞損失） | Communications cables - Specifications for test methods - Part 1-9: Electrical test methods; Unbalance attenuation (longitudinal conversion loss, longitudinal conversion transfer loss) |
| EN 50289-3-1 | 通信電纜 試驗方法規范 第3-1部分：機械試驗方法 基本要求 | Communication cables - Specifications for test methods - Part 3-1: Mechanical test methods; General requirements |
| EN 50289-3-11 | 通信電纜 試驗方法規范 第3-11部分：機械試驗方法 電纜耐切斷性 | Communication cables - Specifications for test methods - Part 3-11: Mechanical test methods; Cable cut-through resistance |
| EN 50289-3-12 | 通信電纜 試驗方法規范 第3-12部分：機械試驗方法 強迫性損傷 | Communication cables - Specifications for test methods - Part 3-12: Mechnical test methods; Shot gun damage |
| EN 50289-3-13 | 通信電纜 試驗方法的規范 第3-13部分：機械試驗方法 風蝕振動 | Communication cables - Specifications for test methods - Part 3-13: Mechanical test methods; Aeolian vibration / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-3-15 | 通信電纜 試驗方法規范 第3-15部分：機械試驗方法 水下電纜耐液壓／注意：和EN 50289-3-1聯合使用 | Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods; Underwater cable resistance to hydrostatic pressure / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-3-16 | 通信電纜 試驗方法規范 第3-16部分：機械試驗方法 電纜拉力性能 | Communication cables - Specifications for test methods - Part 3-16: Mechanical test methods; Cable tensile performance |
| EN 50289-3-17 | 通信電纜 試驗方法規范 第3-17部分：機械試驗方法 絕緣材料和包皮的粘合力 | Communication cables - Specifications for test methods - Part 3-17: Mechnical test methods; Adhesion of dielectric and sheath / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-3-2 | 通信電纜 試驗方法規范 第3-2部分：機械試驗方法 導體的抗拉強度和延展性 | Communication cables - Specifications for test methods - Part 3-2: Mechanical test methods; Tensile strength and elongation for conductor |
| EN 50289-3-4 | 通信電纜 試驗方法規范 第3-4部分：機械試驗方法 絕緣體和包層的抗拉強度 延展性和收縮性 | Communication cables - Specifications for test methods - Part 3-4: Mechanical test methods; Tensile strength, elongation and shrinkage of insulation and sheath |
| EN 50289-3-5 | 通信電纜 試驗方法規范 第3-5部分：機械試驗方法 電纜的抗擠壓性 | Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable |
| EN 50289-3-6 | 通信電纜 試驗方法規范 第3-6部分：機械試驗方法 電纜的抗沖擊性 | Communication cables - Specifications for test methods - Part 3-6: Mechanical test methods; Impact resistance of the cable |
| EN 50289-3-7 | 通信電纜 試驗方法規范 第3-7部分：機械試驗方法 電纜包皮的耐腐蝕性 | Communication cables - Specifications for test methods - Part 3-7: Mechanical test methods; Abrasion resistance of the cable sheath |
| EN 50289-3-8 | 通信電纜 試驗方法規范 第3-8部分：機械試驗方法 電纜包皮標志的耐腐蝕性 | Communication cables - Specifications for test methods - Part 3-8: Mechanical test methods; Abrasion resistance of cable sheath markings |
| EN 50289-3-9 | 通信電纜 試驗方法規范 第3-9部分：機械試驗方法 彎曲試驗 | Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods; Bending tests |
| EN 50289-4-1 | 通信電纜 試驗方法規范 第4-1部分：環境試驗方法 基本要求 | Communication cables - Specifications for test methods - Part 4-1: Environmental test methods; General requirements |
| EN 50289-4-11 | 通信電纜 試驗方法規范 第4-11部分：環境試驗方法 匯集在水平方向上的耐火試驗 | Communication cables - Specifications for test methods - Part 4-11: Environmental test methods; A horizontal integrated fire test method |
| EN 50289-4-14 | 通信電纜 試驗方法的規范 第3-14部分：環境試驗方法 閃電 | Communication cables - Specifications for test methods - Part 4-14: Environmental test methods; Lightning / Note: Applies in conjunction with EN 50289-3-1 |
| EN 50289-4-2 | 通信電纜 試驗方法規范 第4-2部分：環境試驗方法 浸水 | Communication cables - Specifications for test methods - Part 4-2: Environmental test methods; Water penetration |
| EN 50289-4-6 | 通信電纜 試驗方法規范 第4-6部分：環境試驗方法 溫度的周期性變化 | Communication cables - Specifications for test methods - Part 4-6: Environmental test methods; Temperature cycling |
| EN 50289-4-9 | 通信電纜 試驗方法規范 第4-9部分：環境試驗方法 耐氣壓試驗 | Communication cables - Specifications for test methods - Part 4-9: Environmental test methods; Pneumatic resistance |
| EN 50290-2-20 | 通信電纜 第2-20部分：通用的設計原理及結構 總則 | Communication cables - Part 2-20: Common design rules and construction; General |
| EN 50290-2-21 | 通信電纜 第2-21部分：通用的設計原理及結構 PVC絕緣化合物 | Communication cables - Part 2-21: Common design rules and construction; PVC insulation compounds |
| EN 50290-2-22 | 通信電纜 第2-22部分：通用的設計原則及結構 PVC包皮化合物 | Communication cables - Part 2-22: Common design rules and construction; PVC sheating compounds |
| EN 50290-2-23 | 通信電纜 第2-23部分：通用的設計原理及結構 PE絕緣體 | Communication cables - Part 2-23: Common design rules and construction; PE insulation |
| EN 50290-2-24 | 通信電纜 第2-24部分：通用的設計原理及結構 PE包皮 | Communication cables - Part 2-24: Common design rules and construction; PE sheathing / Note: Applies only in conjunction with EN 50290-2-20 |
| EN 50290-2-25 | 通信電纜 第2-25部分：通用的設計原理及結構 聚丙烯絕緣化合物 | Communication cables - Part 2-25: Common design rules and construction; Polypropylene insulation compounds / Note: Applies only in conjunction with EN 50290-2-20 |
| EN 50290-2-26 | 通信電纜 第2-26部分：通用的設計原理及結構 無鹵阻燃熱塑化合物 | Communication cables - Part 2-26: Common design rules and construction; Halogen free flame retardant insulation compounds / Note: Applies only in conjunction with EN 50290-2-20 |
| EN 50290-2-27 | 通信電纜 第2-27部分：通用的設計原理及結構 無鹵阻燃熱塑包復物 | Communication cables - Part 2-27: Common design rules and construction; Halogen free flame retardant thermoplastic sheathing compounds / Note: Applies only in conjunction with EN 50290-2-20 |
| EN 50290-2-28 | 通信電纜 第2-28部分：通用的設計原理及結構 滿充電纜的填充復合物 | Communication cables - Part 2-28: Common design rules and construction; Filling compounds for filled cables / Note: Applies only in conjunction with EN 50290-2-20 |
| EN 50290-2-29 | 通信電纜 第2-29部分：通用的設計原理及結構 交聯PE絕緣復合物 | Communication cables - Part 2-29: Common design rules and construction; Cross-linked PE insulation compounds / Note: Applies only in conjunction with EN 50290-2-20 |
| EN 50290-2-30 | 通信電纜 第2-30部分：通用的設計原理及結構 聚（四氟乙烯－六氟烯）（FEP）絕緣及包復物 | Communication cables - Part 2-30: Common design rules and construction; Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing / Note: Applies only in conjunction with EN 50290-2-20 |
| EN 50290-4-1 | 通信電纜 第4-1部分：電纜用途總則：環境條件及安全問題 | Communication cables - Part 4-1: General considerations for the use of cables; Environmental conditions and safety aspects |
| EN 50299 | 最高電壓為72.5kV至550KV設備的變壓器和電抗器用油浸電纜連接組件 | Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV |
| EN 50305 | 鐵路應用 有特殊防火性能的鐵路機車車輛電纜 試驗方法 | Railway applications - Railway rolling stock cables having special fire performance - Test methods |
| EN 50306-1 | 鐵路設施 有專門防火性能的鐵路車輛電纜 薄壁 第1部分：一般要求 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 1: General requirements |
| EN 50306-2 | 鐵路設施 有專門防火性能的鐵路車輛電纜 薄壁 第2部分：?jiǎn)涡倦娎| | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 2: Single core cables |
| EN 50306-3 | 鐵路設施 有專門防火性能的鐵路車輛電纜 薄壁 第3部分：?jiǎn)涡竞投嘈倦娎|（二芯、三芯和四芯）的屏障及薄 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 3: Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
| EN 50306-4 | 鐵路設施 有專門防火性能的鐵路車輛電纜 薄壁 第4部分：多芯和多對電纜的標準壁護套 | Railway applications - Railway rolling stock cables having special fire performance; Thin wall - Part 4: Multicore and multipair cables standard wall sheathed |
| EN 50307 | 鉛與鉛合金 電纜的鉛與鉛合金包皮和電纜套 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
| EN 50334 | 識別芯線的電纜的注冊標記 | Marking by inscription for the identification of cores of electric cables |
| EN 50336 | 不大于36kV的變壓器和電抗器電纜箱的套筒 | Bushings for transformers and reactor cable boxes not exceeding 36 kV |
| EN 50340 | 液壓電纜切割器 在額定電壓高達AC 30 kV的電氣設施上使用的裝置 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV / Note: Includes Corrigendum of February 2002 |
| EN 50343 | 鐵路設備 機車車輛 安裝電纜規則 | Railway applications - Rolling stock - Rules for installation of cabling |
| EN 50355 | 鐵路設備 具有特殊防火性能的鐵路機車車輛電纜 薄內壁和標準內壁 使用指南 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall; Guide to use |
| EN 50356 | 電纜的火花試驗方法 | Method for spark testing of cables |
| EN 50362 | 應急電路中使用的較大未保護電源和控制電纜的防火試驗方法 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| EN 50368 | 電氣裝置用電纜夾具 | Cable cleats for electrical installations |
| EN 60169-23 | 射頻連接器 第23部分：與3.5mm剛性精密同軸電纜配用外導體內徑3.5mm(0.1378in）的插針插孔式射頻連接器 | Radio-frequency connectors- part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) (IEC 60169-23:1991) |
| EN 60169-24 | 射頻連接器 第24部分：典型用于75Ω電纜分配系統、螺紋連接射頻同軸連接器（F型） | Radio-frequency connectors- part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 60169-24:1991) |
| EN 60169-25 | 射頻連接器 第25部分：與雙芯屏蔽對稱電纜配用、外導體內徑為13.56mm(0.534in)的雙極螺紋連接連接器（TWHN | Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type TWHN) (IEC 60169-25:1992) |
| EN 60230 | 電纜極其附件的沖擊電壓試驗 | Impulse tests on cables and their accessories (IEC 60230:1966) |
| EN 60371-3-8 | 以云母為基材的絕緣材料 第3部分：?jiǎn)雾?xiàng)材料規范 活頁8：耐燃燒安全電纜用云母紙帶 | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables (IEC 60371-3-8:1995 + Corrigendum 1995) |
| EN 60439-5-1996+A1 | 低壓開關設備和控制設備組合裝置 第5部分：公共場所戶外安裝用組合裝置（CDCs）的特殊要求 用于電網中配 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks (IEC 60439-5:1996) |
| EN 60465 | 充油電纜用的未使用過的絕緣礦物油規范 | Specification for unused insulating mineral oils for cables with oil ducts (IEC 60465:1988) |
| EN 60603-9 | 印制板用頻率低于3MHz的連接器 第９部分：2.54mm(0.1in)基本網格印制電路板、底板和電纜連接器用兩對端連 | Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990) |
| EN 60702-1 | 額定電壓750V及以下礦物絕緣電纜 第1部分：電纜 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables (IEC 60702-1:2002) |
| EN 60702-2 | 額定電壓750V及以下礦物絕緣電纜 第2部分：終端 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations (IEC 60702-2:2002) |
| EN 60719 | 額定電壓達450/750V及以下圓形銅導線電纜的平均外形尺寸上下限的計算 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V (IEC 60719:1992) |
| EN 60794-1-1 | 光學纖維電纜 第１－１部分：總規范 總則 | Optical fibre cables - Part 1-1: Generic specification; General (IEC 60794-1-1:2001) |
| EN 60794-1-2-1999 +A | 光學纖維電纜 第1-2部分：總規范 光纜基本試驗程序 | Optical fibre cables - Part 1-2: General specification - Basic optical cable test procedures (IEC 60794-1-2:1999) |
| EN 60794-1-2/prA2 | 光學纖維電纜 第1-2部分：總規范 光纜基本試驗程序 修改草案２ | Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures |
| EN 60794-2-10 | 光纖電纜 第2-10部分：室內電纜 單電纜和雙電纜的族規范 | Optical fibre cables - Part 2-10: Indoor cables; Family specification for simplex and duplex cables (IEC 60794-2-10:2003) / Note: Endorsement notice |
| EN 60794-2-20 | 光纖電纜 第2-20部分：室內電纜 多光纖配電電纜的族規范 | Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003) / Note: Endorsement notice |
| EN 60794-2 | 光纖電纜 第2部分：室內電纜 分規范 | Optical fibre cables - Part 2: Indoor cables; Sectional specification (IEC 60794-2:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002) and EN 60794-1-2 (1999) |
| EN 60794-2-30 | 光纖電纜 第2-30部分：室內電纜 光纖帶狀電纜的族規范 | Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003) / Note: Endorsement notice |
| EN 60794-3-10 | 光纖電纜 第3-10部分：室外電纜 管道和直接填埋的通訊光纜的族規范 | Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables (IEC 60794-3-10:2002, modified) / Note: Endorsement notice |
| EN 60794-3-20 | 光學纖維電纜 第3-20部分：室外電纜 自立式架空通訊光纜的族規范 | Optical fibre cables - Part 3-20: Outdoor cables; Family specification for optical self-supporting aerial telecommunication cables (IEC 60794-3-20:2002, modified) / Note: Endorsement notice |
| EN 60794-3 | 光學纖維電纜 第３部分：分規范 戶外電纜 | Optical fibre cables - Part 3: Sectional specification; Outdoor cables (IEC 60794-3:2001) |
| EN 60794-3-30 | 光纖電纜 第3-30部分：室外電纜 穿越湖、江的通訊光纜的族規范 | Optical fibre cables - Part 3-30: Outdoor cables; Family specification for optical telecommunication cables for lake and river crossings (IEC 60794-3-30:2002) / Note: Endorsement notice. Applies only in conjunction with EN 60794-1-1 (2002), EN 60794-1-2 |
| EN 60811-1-1-1995+A1 | 電纜絕緣和護套材料 通用試驗方法 第1部分：一般應用方法 第1節：厚度和總尺寸的測量 機械性能測定試驗 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties (IEC 60811-1-1:1993) |
| EN 60811-1-2-1995 +A2 | 電纜絕緣和護套材料 通用試驗方法 第1部分：一般應用方法 第2節：熱老化方法 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 2: Thermal ageing methods (IEC 60811-1-2:1985 + corrigendum 1986 + A1:1989) |
| EN 60811-1-3-1995 +A1 | 電纜絕緣和護套材料通用試驗方法 第１部分：一般應用方法 第３節：密度測定方法 吸水試驗 收縮試驗 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 3: Methods for determining the density - Water absorption tests - Shrinkage test (IEC 60811-1-3:1993) |
| EN 60811-1-4-1995 +A2 | 電纜絕緣和護套材料 通用試驗方法：第1部分：一般應用方法 第4節：低溫試驗 | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application; section 4: Test at low temperature (IEC 60811-1-4:1985 + corrigendum 1986 + A1:1993) |
| EN 60811-2-1-1998 +A1 | 電纜絕緣和護套材料 通用試驗方法 第2-1部分：合成橡膠專用方法 抗臭氧試驗 熱固試驗和礦物油浸試驗 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998) |
| EN 60811-3-1-1995 +A1-1996+A2 | 電纜的絕緣和護套材料 通用試驗方法 第3部分：.聚氯乙烯(PVC)化合物專用方法 第1節：高溫下壓力試驗 耐 | Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking (IEC 60811-3-1:1985 + Corrigendum 1986) |
| EN 60811-3-2 | 電纜絕緣和護套材料 通用試驗方法 第3部分：聚氯乙烯復合物專用方法 第2節：質量損失試驗 熱穩定性試驗 | Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test (IEC 60811-3-2:1985 + Corrigendum 1986 + A1:1993) |
| EN 60811-4-1 | 電纜絕緣護套材料 通用試驗方法 第4部分：聚乙烯和聚丙烯化合物專用方法 第1節：耐環境應力破裂性 在空 | Insulating and sheathing materials of electric cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 1: Resistance to environmental stress cracking - Wrapping test after thermal ageing in air - Meas |
| EN 60811-4-2 | 電纜絕緣和護套材料 通用試驗方法 第4部分：聚乙烯和聚丙烯化合物專用方法 第2節：預處理后抗拉強度和斷 | Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Tensile strength and elongation at break after pre-conditioning-Wrapping text often thermal ageing in air-Measurement of mass increase-Long-term stablity text-Text method for Copper-cotalyed oxidation |
| EN 60811-5-1 | 電纜絕緣和護套材料通用試驗方法 第5部分：填充復合物的專用方法 第1節：滴點 油分離 較低溫脆性 總酸 | Insulating and sheathing materials of electric cables and optical fibre cables - Common test methods - Part 5: Methods specific to filling compounds - Section 1: Drop point; separation of oil - lower temperature brittleness; total acid number; absence of |
| EN 60874-17 | 光纖和電纜的接頭 第１７部分：纖維光學接頭的部分規范 F-05型(磨擦鎖定) | Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996) |
| EN 60885-2 | 電纜的電氣試驗方法 第2部分：局部放電試驗 | Electrical test methods for electric cables - Part 2: Partial discharge tests (IEC 60885-2:1987) / Note: Endorsement notice |
| EN 60885-3 | 電纜的電氣試驗方法 第3部分：局部放電試驗 擠壓電力電纜段局部放電測量的試驗方法 | Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988) / Note: Endorsement notice |
| EN 60966-1 | 射頻與同軸電纜組件 第1部分：總規范 一般要求和試驗方法 | Radio frequency and coaxial cables assemblies - Part 1: Generic specification - General requirements and test methods (IEC 60966-1:1999) |
| EN 60966-2-1-1995+A1 | 射頻和同軸電纜組件 第2-1部分：柔軟同軸電纜組件分規范 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies (IEC 60966-2-1:1991) |
| EN 60966-2-2 | 射頻和同軸電纜組件 第2－2部分：柔軟性同軸電纜組件空白詳細規范 | Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:1992) |
| EN 60966-2-3 | 射頻和同軸電纜部件 第2-3部分：柔軟同軸電纜部件的詳細規范 | Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:1996) |
| EN 60966-2-4 | 射頻與同軸電纜組件 第2-4部分：無線電和電視接收機用電纜部件詳細規范（頻率范圍0至3000MHz的IEC60169-2 | Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-2 connectors (IEC 60966-2-4:2003) / Note: Endorsement notice |
| EN 60966-2-5 | 射頻和同軸電纜組件 第2-5部分：無線電和電視接收機用電纜組件的詳細規格 頻率范圍在0至1000 MHz | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 60169-2 connectors (IEC 60966-2-5:2003) / Note: Endorsement notice |
| EN 60966-2-6 | 射頻和同軸電纜組件 第2-6部分：電視和無線電接收機用電纜組件的詳細規格 頻率范圍在0至3000 MHz,IEC 601 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:2003) / Note: Endorsement notice |
| EN 60966-3-1 | 射頻和同軸電纜組件 第3－1部分：半柔軟同軸電纜組件空白詳細規范 | Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:1992) |
| EN 60966-3 | 射頻和同軸電纜組件 第3部分：半柔軟同軸電纜組件分規范 | Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:1992) |
| EN 60966-3-2 | 射頻和同軸電纜部件 第3-1部分：.GSM(0.8GHz-1GHz)用半柔軟同軸電纜部件的詳細規范 | Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:1996) |
| EN 60966-4-1 | 射頻和同軸電纜部件 第4-1部分：半硬性同軸電纜組件空白詳細規范 | Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:1994) |
| EN 60966-4 | 射頻和同軸電纜部件 第4部分：半硬性同軸電纜組件分規范 | Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:1992) |
| EN 60974-12 | 弧焊設備 第12部分：焊接電纜的連接器 | Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified) |
| EN 61076-4-110 | 電子設備用連接器 第4-110部分：有質量評定的印制板連接器 包括完全屏蔽和閉鎖功能的基本網格為2.0mm閉鎖 | Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality; Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function (IEC 61076-4-110:2001) |
| EN 61076-7 | 直流低頻模擬及數字高速數據應用系統用連接器 第7部分：有質量評定的包括鑒定和能力批準的電纜引出端附件 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval; Sectional specification (IEC 61076-7:2000) |
| EN 61138-1997 +A11 | 便攜式接地和短路設備用電纜 | Cables for portable earthing and short-circuiting equipment (IEC 61138:1994 + A1:1995, modified) |
| EN 61169-24 | 射頻連接器 第24部分：分規范 帶有螺旋聯接器、通常用于75Ω電纜分配系統(F型)的射頻同軸連接器 | Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 61169-24:2001) |
| EN 61196-2 | 射頻電纜 規范 第2部分：聚四氟乙烯(PTFE)絕緣半硬射頻同軸電纜分規范 | Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice |
| EN 61196-3 | 射頻電纜 第3部分：局域網用同軸電纜分規范 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998) |
| EN 61196-3-2 | 射頻電纜 第3-2部分：水平層布線數字通信用同軸電纜 有效半徑為185m、速率10Mb/s及以下的局域網用實心介 | Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997) |
| EN 61196-3-3 | 射頻電纜 第3-3部分：水平層布線數字通信用同軸電纜 有效半徑為185m、速率10Mb/s及以下的局域網用泡沫介 | Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997) |
| EN 61238-1 | 額定電壓達 30 kV 的電力電纜的壓縮和機械連接器 第1部分：試驗方法和要求 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (U<(Index)m> = 42 kV) - Part 1: Test methods and requirements (IEC 61238-1:2003, modified) / Note: Endorsement notice |
| EN 61300-2-35 | 光纖互連器件和無源元件 基本試驗和測量程序 第2-35部分：試驗 電纜章動 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests-Cable nutation (IEC 61300-2-35:1995) |
| EN 61300-2-4 | 光纖互連器件和無源元件 基本試驗和測量程序 第2-4部分：試驗 纖維/電纜保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention (IEC 61300-2-4:1995) |
| EN 61313-1 | 光纖無源器件和電纜組件 第1部分：能力批準 通用規范 | Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification (IEC 61313-1:1995) |
| EN 61316 | 工業電纜卷筒 | Industrial cable reels (IEC 61316:1999) |
| EN 61515 | 礦物絕緣熱電偶電纜和熱電偶 | Mineral insulated thermocouple cables and thermocouples (IEC 61515:1995) |
| EN 61537 | 電纜管理用電纜托架系統和電纜梯系統 | Cable tray systems and cable ladder systems for cable management (IEC 61537:2001) |
| EN 61726 | 電纜組件、電纜、連接器和無源微波元件 混響室法測量屏蔽衰減 | Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method (IEC 61726:1999) |
| EN 61935-1-2000 +A1 | 通用布線系統 根據ISO/IEC 11801對對稱通信布線進行檢驗的規范 第1部分：電纜敷設 | Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling (IEC 61935-1:2000) |
| EN 61935-2 | 通用布線系統 根據EN 50173對對稱通信布線進行檢驗的規范 第2部分：中繼電纜和施工場所軟線 | Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with EN 50173 - Part 2: Patch cords and work area cords (IEC 61935-2:2003) / Note: Endorsement notice. Includes Corrigendum of September 2003 |
| EN 62012-1 | 惡劣環境下使用的數字通信用多芯和對稱雙芯/四芯電纜 第1部分：通用規范 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification (IEC 62012-1:2002) / Note: Endorsement notice |
| EN 62037 | 射頻連接器、連接器電纜組件和電纜 互調電平測量 | RF connectors, connector cable assemblies and cables - Intermodulation level measurement (IEC 62037:1999) |
| EN ISO 10807 | 管道工程 在爆燃性空氣中電纜保護用皺紋軟金屬管組件 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere (ISO 10807:1994) |
| EN ISO 5828 | 電阻焊設備 連接水冷接頭的二次連接電纜 尺寸及特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001) |
| EN ISO 6551 | 石油液體和氣體 動態測量的精度和可靠性 電脈沖數據和／或電子脈沖數據的電纜傳輸 | Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data (ISO 6551:1982) |
| EN ISO 8205-1 | 電阻焊接水冷次級線圈連接電纜 第1部分：雙導體連接電纜的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Part 1: Dimensions and requirements for double-conductor connection cables (ISO 8205-1:2002) |
| EN ISO 8205-2 | 電阻焊接水冷次級線圈連接電纜 第2部分：?jiǎn)胃鶎?dǎo)線連接電纜的尺寸和要求 | Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002) |
| EN ISO 8205-3 | 電阻焊接水冷次級線圈連接電纜 第3部分：試驗要求 | Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:1993) |
| ENV 50213 | 機場照明用的金屬屏蔽電纜 | Metallic screened cables for airfield lighting |
| HD 120 S1 | 特性阻抗和射頻同軸電纜的尺寸 | Characteristic impedances and dimensions of radio-frequency coaxial cables |
| HD 134.5 S1 | 射頻連接器 第5部分：96號IEC 60050-17電纜和更大號電纜用射頻同軸連接器 | Radio-frequency connectors-part 5: R.F. coaxial connectors for cables 96 IEC 60050-17 and larger |
| HD 134.6 S1 | 射頻連接器 第6部分：96號IEC 60075-17電纜和更大號電纜用射頻同軸連接器 | Radio-frequency connectors; part 6: R.F. coaxial connectors for cables 96 IEC 60075-17 and larger |
| HD 21.1 S4 | 額定電壓為450/750V及以下的熱塑性塑料絕的電纜 第1部分：一般要求 | Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements |
| HD 21.10 S2 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第10部分：可延長導線 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10: Extensible leads |
| HD 21.11 S1-1995+A1 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第11部分：光源電纜 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11: Cables for luminaires |
| HD 21.12 S1-1994 +A1 | 額定電壓450/750V的聚氯乙烯絕緣電纜 第12部分：耐熱軟電纜(軟線) | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat-resistant flexible cables (cords) |
| HD 21.13 S1-1995 +A1 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第13部分：帶2個或更多導體的耐油聚氯乙烯鎧裝電纜 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 13: Oil resistant PVC sheated cables with two or more conductors |
| HD 21.14 S1 | 額定電壓450/750V及以下的熱塑性塑料絕的電纜 第14部分：非鹵素?zé)崴苄运芰匣衔锏慕^緣和包覆的軟電纜(軟 | Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds |
| HD 21.2 S3 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第2部分：試驗方法 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods |
| HD 21.3 S3-1995 +A1 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第3部分：固定布線用非鎧裝電纜 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring (IEC 60227-3:1993, modified) |
| HD 21.4 S2 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第4部分：固定配線的鎧裝電纜 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring |
| HD 21.5 S3-1994 +A1-1999+A2 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第5部分：軟電纜(軟線) | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V; part 5: flexible cables (cords) (IEC 60227-5:1979, modified) |
| HD 21.7 S2-1996+A1 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第7部分：溫度達90攝氏度的導體內部配線用單芯非鎧裝電纜 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90℃ |
| HD 21.8 S2 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第8部分：裝飾鏈用單芯非鎧裝電纜 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains |
| HD 21.9 S2-1995 +A1 | 額定電壓450/750V及以下的聚氯乙烯絕緣電纜 第9部分：低溫安裝用單芯非鎧裝電纜 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheated cable for installation at low temperatures |
| HD 22.1 S4 | 額定電壓450/750V及以下的交聯橡膠絕緣電纜 第1部分：一般要求 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements |
| HD 22.10 S1-1994+A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第10部分：EPR絕緣和聚亞安脂鎧裝軟電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 10: EPR insulated and polyurethane sheathed flexible cable |
| HD 22.11 S1-1995 +A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第11部分：EVA軟線和軟電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 11: EVA cords and flexible cables |
| HD 22.12 S1-1996 +A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第12部分：耐熱EPR軟線和軟電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat resistant EPR cords and flexible cables |
| HD 22.13 S1-1996+A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第13部分：煙霧和腐蝕性氣體低排放的絕緣和交聯聚合物單芯和多芯軟 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13: Single and multicore flexible cables, insulated and sheathed with crosslinked polymer and having low emission of smoke and corrosive gases |
| HD 22.14 S2 | 額定電壓450/750V及以下的交聯橡膠絕緣電纜 第14部分：要求高軟度設施用軟線 | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility |
| HD 22.15 S1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第15部分：絕緣并包覆耐熱硅樹脂橡膠的多芯電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber |
| HD 22.16 S1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第16部分：防水聚氯丁烯或相同的合成橡膠鎧裝電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 16: Water resistant polychloroprene or equivalent synthetic elastomer sheathed cables |
| HD 22.2 S3 | 額定電壓450/750V及以下的橡膠絕緣電纜 第2部分：試驗方法 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods |
| HD 22.3 S3-1995 +A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第3部分：耐熱硅樹脂橡膠絕緣電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone rubber insulated cables (IEC 60245-3:1980, modified) / Note: To be replaced by prHD 22.3 S4 (2003-05). |
| HD 22.4 S3-1995 +A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第4部分：軟線和軟電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables (IEC 60245-4:1994, modified) / Note: To be replaced by prHD 22.4 S4 (2003-05). |
| HD 22.6 S2-1995 +A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第6部分：弧焊電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 6: Arc welding cables / Note: To be amended by HD 22.6 S2/prA2 (2003-05). |
| HD 22.7 S2-1995+A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第7部分：溫度達110°C的導體內部配線用耐增溫電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110℃ / Note: To be amended by HD 22.7 S2/prA2 (2003-05). |
| HD 22.8 S2-1994+A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第8部分：裝飾鏈用聚氯丁烯或相同的合成橡膠鎧裝電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains / Note: To be amended by HD 22.8 S2/prA2 (2003-05). |
| HD 22.9 S2-1995+A1 | 額定電壓450/750V及以下的橡膠絕緣電纜 第9部分：煙霧和腐蝕性氣體低排放的固定配線用單芯非鎧裝電纜 | Rubber insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cables for fixed wiring having low emission of smoke and corrosive gases |
| HD 27 S1 | 軟電纜和軟線芯體的顏色 | Colours of the cores of flexible cables and cords |
| HD 308 S2 | 電纜芯和軟線的識別 | Identification of cores in cables and flexible cords |
| HD 359 S2 | 聚氯乙烯護套扁式電梯電纜 | Flat polyvinylchloride sheathed lift cables |
| HD 361 S3 | 電纜設備系統 | System for cable designation |
| HD 364 S2 | 醫療X光設備用高壓電纜插頭和插座連接 | High-voltage cable plug and socket connections for medical X-ray equipment |
| HD 383 S2-1986+A1 -1989+A2 | 絕緣電纜的導線 環形導線公差極限指南 | Conductors of insulated cables; guide to the dimensional limits of circular conductors |
| HD 428.2.1 S1 | 50 Hz、50 至2500 kVA、設備最高電壓不超過36 kV 的三相油浸式配電變壓器 第2部分：高壓和/或低壓端帶有電 | Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side - Section 1: General req uirements |
| HD 428.2.2 S1 | 50 Hz、50 至2500 kVA、設備最高電壓不超過36 kV 的三相油浸式配電變壓器 第2部分：高壓和/或低壓端帶有電 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 2: Cable boxes |
| HD 428.2.3 S1 | 50 Hz、50 至2500 kVA、設備最高電壓不超過36 kV 的三相油浸式配電變壓器 第2部分：高壓和/或低壓端帶有電 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Section 3: Cable boxes |
| HD 446.3 S1 | 熱電偶 第3部分：擴展和補償電纜 公差和識別系統 | Thermocouples; Part 3: Extension and compensating cables; Tolerances and identification system (IEC 60584-3:1989, modified) |
| HD 489 S1 | 射頻電纜和連接器用六邊形和方形壓接模型腔、壓錐、標準規、外導體壓接套和中心接觸壓接圓筒的推薦性尺寸 | Recommended dimensions for hexagonal and square crimping-die cavities, indentors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors |
| HD 516 S2-1997 +A1 | 低壓協調電纜的使用指南 | Guide to use of low voltage harmonized cables |
| HD 586.3 S1 | 額定電壓不超過750V的礦物絕緣電纜 第3部分：使用指南 | Mineral insulated cables with a rated voltage not exceeding 750 V - Part 3: Guide to use |
| HD 603 S1-1994 +A1 | 額定電壓0.6/1 kV的配電電纜 | Distribution cables of rated voltage 0,6/1 kV |
| HD 604 S1-1994 +A1 | 發電站用具有特殊防火性能的0.6/1kV電力電纜 | 0.6/1 kV power cables with special fire performance for use in power stations |
| HD 605 S1-1994+A1-1996 +A2-2001+A3 | 電纜 附加試驗方法 | Electrical cables - Additional test methods / Note: To be amended by HD 605 S1/prA4 (2003-08). |
| HD 609 S1 | 數字和模擬通信用設備電纜分規范 | Sectional specification for equipment cables to be used for digital and analogue communication |
| HD 620 S1-1996 +A1 | 額定電壓3.6/6 (7.2) kV 至 20.8/36 (42) kV的擠壓絕緣配電電纜 | Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV |
| HD 621 S1-1996 +A1 | 中壓樹脂浸漬紙絕緣配電電纜 | Medium voltage impregnated paper insulated distribution cables |
| HD 622 S1-1996 +A1 | 發電站使用的、具有特殊防火性能的、額定電壓從3.6/6 (7.2) kV 至 20.8/36 (42) kV并包括20.8/36 (42) kV的 | Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations |
| HD 623 S1-1996+A1 | 額定電壓 0.6/1.0 kV 配電電纜的接頭、止動端和室外終端規范 | Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV / Note: To be replaced by prEN 50393 (2003-07). |
| HD 626 S1-1996 +A1-1997+A2 | 額定電壓0.6/1 (1.2) kV的高架配電電纜 | Overhead distribution cables of rated voltage U<(Index)o>/U(U<(Index)m>): 0,6/1 (1,2) kV |
| HD 627 S1-1996 +A1 | 電力電纜 地上和地下安裝的多芯和多對電纜 | Power cables - Multicore and multipair cable for installation above and below ground |
| HD 628 S1-1996+A1 | 額定電壓3.6/6 kV至20.8/36 kV并包括20.8/36 kV的電力電纜附件的試驗方法 | Test methods for accessories for power cables with rated voltage from 3,6/6 kV(Um = 7,2 kV) up to and including 20,8/36 kV(Um = 42 kV) |
| HD 629.1 S1-1996 +A1 | 額定電壓3.6/6 kV至20.8/36 kV的電力電纜用附件的試驗要求 第1部分：擠壓絕緣電纜 | Test requirements on accessories for use on power cables of rated voltages from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 1: Cables with extruded insulation / Note: To be replaced by prHD 629.1 S2 (2003-10). |
| HD 629.2 S1-1997 +A1 | 額定電壓3.6/6(7.2) kV至20.8/36(42) kV的電力電纜用附件的試驗要求 第2部分：樹脂浸漬紙絕緣電纜 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation / Note: To be replaced by prHD 629.2 S2 (2003-10). |
| HD 631.1 S1 | 材料特性 第1部分：電纜附件中使用的化合物：硫化前和硫化狀態下的樹脂化合物 | Material characterisation - Part 1: Compounds for use in cable accessories: Resinous compounds before cure and in the cured state |
| HD 632 S1 | 額定電壓36 kV 至150 kV的擠壓絕緣電力電纜及其附件 | Power cables with extruded insulation and their accessories for rated voltages above 36 kV (Um = 42 kV) up to 150 kV (Um = 170 kV) |
| HD 633 S1 | 交流電壓400 kV及以下的注油(注液)、紙和聚丙烯紙層薄板絕緣、金屬護套電纜及附件的試驗 | Tests on oil-filled (fluid-filled), paper- and polypropylene paper laminate-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um=420 kV) |
| HD 634 S1 | 交流電壓275 kV及以下的內部氣壓電纜及附件的試驗 | Tests on internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV) |
| HD 635 S1 | 交流電壓275 kV及以下的外部氣壓電纜及附件的試驗 | Tests on external gas-pressure (gas compression) cables and accessories for alternating voltages up to and including 275 kV (U<(Index)m>=300 kV) |
| prEN 14280 | 地下電纜管道的塑料管線系統 未增塑聚氯乙烯 塑料管、管件及管線規范 | Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| prEN 14282 | 地下電纜管道的塑料管線系統 聚丙烯 塑料管、管件及管線規范 | Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| prEN 177000 | 通用規范：光纖連接器/電纜組件 能力批準 | Generic specification: optical fibre connector/cable assemblies; capability approval |
| prEN 2084 | 航空航天系列 銅和銅合金導體的一般用途的單芯電纜 技術規范 | Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification |
| prEN 2234 | 航空航天系列 耐火電纜 技術規則 | Aerospace series - Cable, electrical, fire resistant - Technical specification |
| prEN 2235 | 航空航天系列 屏蔽和護套單芯和多芯電纜 | Aerospace series - Single and multicore electric cables, screened and jacketed |
| prEN 2266-002 | 航空航天系列 通用電纜 工作溫度 55 ℃ 和 200 ℃ 之間 第002部分：總則 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: General |
| prEN 2266-007 | 航空航天系列 通用電纜 工作溫度 55 ℃ 和 200 ℃ 之間 第007部分：UV激光可打印的多芯套內電纜 產品 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 200℃ - Part 007: UV laser printable multicore jacketed cable - Product standard |
| prEN 2267-002 | 航空航天系列 通用電纜 工作溫度 55 ℃ 和 260 ℃ 之間 第002部分：總則 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: General |
| prEN 2267-007 | 航空航天系列 通用電纜 工作溫度 55 ℃ 和 200 ℃ 之間 第007部分：007 DMA 系列 單芯噴墨打印和多芯 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard |
| prEN 2267-008 | 航空航天系列 通用電纜 工作溫度 55 ℃ 和 200 ℃ 之間 第008部分：008 DMA 系列 單芯UV激光打印和多 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55℃ and 260℃ - Part 008: DM family, single UV laser printable and multicore assembly - Product standard |
| prEN 2346-002 | 航空航天系列 耐火電纜 工作溫度65 ℃ and 260 ℃之間 第00部分：00 總則 | Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 002: General |
| prEN 2346-003 | 航空航天系列 耐火電纜 工作溫度65 ℃ and 260 ℃之間 第003部分：?jiǎn)涡?DL系列 總則 | Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 003: DL family, single core; Product standard |
| prEN 2346-004 | 航空航天系列 耐火電纜 工作溫度65 ℃ and 260 ℃之間 第004部分：DN 系列 UV單芯激光印刷和多芯組裝 | Aerospace series - Cables, electrical, fire-resistant; Operating temperatures between -65℃ and 260℃ - Teil 004: DN family, single UV laser printable and multicore assembly; Light weight; Product standard |
| prEN 2591-609 | 航空航天系列 光電連接元件 試驗方法 第609部分：光學元件 電纜附件的效能 電纜循環可繞性 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
| prEN 2713-002 | 航空航天系列 一般用途的單芯和多芯電纜 工作溫度在－55℃和200℃之間 第002部分：屏蔽和護套 通用 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 002: Screened and jacketed - General |
| prEN 2713-011 | 航空航天系列 一般用途的單芯和多芯電纜 工作溫度在－55℃和260℃之間 第011部分：屏蔽（螺旋）和護套 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 200℃ - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard |
| prEN 2714-002 | 航空航天系列 一般用途的單芯和多芯電纜 工作溫度在－55℃和260℃之間 第002部分：屏蔽和護套 通用 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 002: Screened and jacketed - General |
| prEN 2714-011 | 航空航天系列 一般用途的單芯和多芯電纜 工作溫度在－55℃和260℃之間 第011部分：屏蔽（螺旋）和護套 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard |
| prEN 2714-012 | 航空航天系列 一般用途的單芯和多芯電纜 工作溫度在－55℃和260℃之間 第0012部分：屏蔽（編織的）和護 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55℃ and 260℃ - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard |
| prEN 2853 | 航空航天系列 帶EN2083導體的電纜的電流額定值 | Aerospace series - Current ratings for electrical cables with conductor EN 2083 |
| prEN 3475-203 | 航空航天系列 飛行器用的電纜 試驗方法 第203部分：尺寸 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions |
| prEN 3475-306 | 航空航天系列 飛行器用的電纜 試驗方法 第306部分：導體連續性 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 306: Continuity of conductors |
| prEN 3475-411 | 航空航天系列 飛行器用的電纜 試驗方法 第411部分：液體阻力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
| prEN 3475-414 | 航空航天系列 飛行器用的電纜 試驗方法 第414部分：差式掃描熱量計（ＤＳＣ測試） | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) |
| prEN 3475-415 | 航空航天系列 飛行器用的電纜 試驗方法 第415部分：溫度的迅速變化 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 415: Rapid change of temperature |
| prEN 3475-416 | 航空航天系列 飛行器用的電纜 試驗方法 第416部分：熱老化 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 416: Thermal ageing |
| prEN 3475-513 | 航空航天系列 飛行器用的電纜 試驗方法 第513部分：變形阻力（與塑料電纜捆接時） | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 513: Deformation resistance (Installation with plastic cable ties) |
| prEN 3475-601 | 航空航天系列 飛行器用的電纜 試驗方法 第601部分：煙密度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
| prEN 3475-602 | 航空航天系列 飛行器用的電纜 試驗方法 第602部分：毒性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
| prEN 3719 | 航空航天系列 電纜用鋁和鋁合金導體 產品標準 | Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
| prEN 4434 | 航空航天系列 用于電纜的銅或銅合金輕質導線 產品標準 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard |
| prEN 45510-2-8 | 電站設備采購指南 第2-8部分：電氣設備 動力電纜 | Guide for procurement of power station equipment - Electrical equipment - Part 2-8: Power cables |
| prEN 45541 | 采購指南 電氣設備 電纜網 | Guide for procurement - Electrical equipment - Cabling systems |
| prEN 45542 | 采購指南 電氣設備 LV/MV電纜 | Guide for procurement - Electrical equipment - LV/MV cables |
| prEN 4604-001 | 航空航天系列 信號傳輸用電纜 第001部分：技術規范 | Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification |
| prEN 4604-002 | 航空航天系列 信號傳輸用電纜 第002部分：總則 | Aerospace series - Cable, electrical, for signal transmission - Part 002: General |
| prEN 4604-003 | 航空航天系列 信號傳輸用電纜 第003部分：50 歐姆、200度、WZ型同軸電纜 產品標準 | Aerospace series - Cable, electrical, for signal transmission - Part 003: Coaxial cable 50 Ohm, 200℃, type WZ; Product standard |
| prEN 4604-004 | 航空航天系列 信號傳輸用電纜 第004部分：耐擾性、50 歐姆、200度、WS型微型同軸電纜 產品標準 | Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200℃, type WS; Product standard |
| prEN 4604-005 | 航空航天系列 信號傳輸用電纜 第005部分：75 歐姆、200度、WL型同軸電纜 產品標準 | Aerospace series - Cable, electrical, for signal transmission - Part 005: Cable, coaxial, 75 Ohms, 200℃, type WL; Product standard |
| prEN 4604-006 | 航空航天系列 信號傳輸用電纜 第006部分：50 歐姆、200度、WM型同軸電纜 產品標準 | Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 Ohms, 200℃, type WM; Product standard |
| prEN 4604-007 | 航空航天系列 信號傳輸用電纜 第007部分：50 歐姆、200度、WN型同軸電纜 產品標準 | Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 Ohms, 200℃, type WN; Product standard |
| prEN 474-12 | 土方機械 安全 第12部分：電纜溝開鑿機要求 | Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
| prEN 50085-2-1 | 電氣裝置用電纜槽和電纜管道系統 第2-1部分：安裝在墻上或天花板上的電纜槽和電纜管道系統的特殊要求 | Cable trunking and cable ducting systems for electrical installations - Part 2-1: Particular requirements for cable trunking systems and cable ducting systems intended for mounting on walls and/or ceilings |
| prEN 50090-9-1 | 家用和建筑物電子系統（HBES） 第9-1部分：安裝要求 通用的HBES一級雙絞線敷設電纜 | Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements; Generic cabling for HBES class 1 twisted pair |
| prEN 50118 | 家用及類似目的使用的電纜盤（IEC 23B(秘書處)323） | Cable reels for household and similar purposes (IEC 23B(Secretariat)323) |
| prEN 50174-3 | 信息技術信息技術 鋪設電纜裝置 第3部分：：建筑物外部設施安裝的規劃及實踐 | Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings |
| prEN 50290-1-2 | 通信電纜 第1-2部分：通用的設計原理及結構 定義 | Communication cables - Part 1-2: Definitions |
| prEN 50290-2-1 | 通信電纜 第2-1部分：通用的設計原理及結構 | Communication cables - Part 2-1: Common design rules and construction / Note: Applies in conjunction with EN 50290-1-1 |
| prEN 50290-3 | 通信電纜 第3部分：質量評定 | Communication cables - Part 3: Quality assessment |
| prEN 50369 | 電纜的液封外殼系統 | Liquid tight sheathing systems for cable management |
| prEN 6049-001 | 航空航天系列 設備電纜 偏聚酸胺纖維保護套 第001部分：技術規范 | Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 001: Technical specification |
| prEN 6049-006 | 航空航天系列 設備電纜 偏聚酸胺纖維保護套 第006部分：自動包裝保護套 易彎曲接線端裝置 產品標準 | Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard |
| prEN 6059-100 | 航空航天系列 設備電纜 保護套 試驗方法 第100部分：總則 | Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 100: General |
| prEN 6059-303 | 航空航天系列 設備電纜 保護套 試驗方法 第303部分：耐流體性 | Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids |
| prEN 6059-406 | 航空航天系列 設備電纜 保護套 試驗方法 第406部分：振動 | Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 406: Vibration |
| prEN 60728-6 | 電視信號的電纜網絡 聲音信號交互服務 第６部分：光學裝置 | IEC 60728-6: Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| prEN 60794-4-1 | 光學纖維電纜 第４－１部分：高壓輸電線架空電纜 | IEC 60794-4-1: Optical fibre cables - Part 4-1: Aerial optical cables for high voltage power lines |
| prEN 60794-4 | 光學纖維電纜 第４部分：高壓輸電線架空電纜 | IEC 60794-4, Ed. 2.0: Optical fibre cables - Part 4: Sectional specification; Aerial optical cables along electrical power lines |
| prEN 61156 | 數字通信用對絞或星絞多芯對稱電纜的通用規范 | Draft IEC 61156: generic specification for multicore and symmetrical pair/quad cables for digital communications |
| prEN 61279 | 分規范 光學電信電纜 | IEC 61279; sectional specification; optical telecommunication cables |
| prHD 359 S3 | 聚氯乙烯護套扁式軟電纜 | Flat polyvinyl chloride sheathed flexible cables |
| prHD 361 S3 | 電纜設備系統 | System for cable designation |
| 編號 | 中文名稱 | 英文名稱 |