微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| CWA 14747 | 人道主義者的主要活動 檢查和評定 金屬探測器 | Humanitarian mine action - Test and evaluation - Metal detectors |
| EN 10246-10 | 鋼管的無損檢測 第10部分：鋼管缺陷探測用的自動熔弧焊鋼管焊縫的射線檢驗 | Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| EN 10246-11 | 鋼管的無損檢測 第11部分：表面缺陷探測用的無縫和焊接鋼管的液體滲透檢驗 | Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections |
| EN 10246-12 | 鋼管的無損檢測 第12部分：表面缺陷探測用的無縫和焊接鐵磁鋼管的磁粉檢驗 | Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| EN 10246-14 | 鋼管的無損檢測 第14部分：層狀缺陷探測用的無縫和焊接鋼管(埋弧焊接除外)的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| EN 10246-15 | 鋼管的無損檢測 第15部分：層狀缺陷探測用的制造焊接鋼管用鋼帶/鋼板的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| EN 10246-16 | 鋼管的無損檢測 第16部分：層狀缺陷探測用的焊接鋼管焊縫附近區域的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
| EN 10246-17 | 鋼管的無損檢測 第17部分：層狀缺陷探測用的無縫和焊接鋼管端部的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
| EN 10246-18 | 鋼管的無損檢測 第18部分：層狀缺陷探測用的無縫和焊接鐵磁鋼管端部的磁粉檢驗 | Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
| EN 10246-3 | 鋼管的無損檢測 第3部分：缺陷探測用無縫和焊接鋼管(埋弧焊除外)的自動渦流檢驗 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10246-4 | 鋼管的無損檢測 第4部分：橫向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 | Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
| EN 10246-5 | 鋼管的無損檢測 第5部分：徑向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 | Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| EN 10246-6 | 鋼管的無損檢測 第6部分：橫向缺陷探測用無縫鋼管的自動全周界超聲檢驗 | Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
| EN 10246-7 | 鋼管的無損檢測 第7部分：縱向缺陷探測用的無縫和焊接鐵磁鋼管(埋弧焊除外)的自動周界超聲檢驗 | Non destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections |
| EN 10246-8 | 鋼管的無損檢測 第8部分：縱向缺陷探測用電焊鋼管焊縫的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| EN 10246-9 | 鋼管的無損檢測 第9部分：探測用縱向和/或橫向缺陷埋弧焊鋼管焊縫的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 12094-9 | 固定式消防系統 氣體滅火系統的部件 第9部分：對專用火焰探測器的要求及試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 9: Requirements and test methods for special fire detectors |
| EN 12766-1 | 石油制品和廢油 PCBs和相關產品的測定 第1部分：用電子俘獲探測器（ECD）通過氣相色譜分析（GC）法分離和 | Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| EN 13751 | 食品 使用光激發光探測輻照食品 | Foodstuffs - Detection of irradiated food using photostimulated luminescence |
| EN 1518 | 無損檢驗 漏泄試驗 質譜漏泄探測器特性 | Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors |
| EN 50194 | 探測房屋內易燃氣體的電氣裝置 測試方法及性能要求 | Electrical apparatus for the detection of combustible gases in domestic premises - Test methods and performance requirements |
| EN 50238 | 鐵路應用 機車車輛和火車探測系統的兼容性 | Railway applications - Compatibility between rolling stock and train detection systems |
| EN 50244 | 家用易燃氣體探測用電氣設備 選擇、安裝、使用和維修指南 | Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance |
| EN 50270 | 電磁兼容性 探測和測量易燃氣體、有毒氣體或氧氣的電氣裝置 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 50271 | 探測和測量易燃氣體、有毒氣體或氧氣的電氣裝置 使用軟件和（或）數字技術裝置的要求和測試 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
| EN 50291 | 探測房屋內一氧化碳的電氣裝置 試驗方法和性能要求 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Test methods and performance requirements |
| EN 50292 | 探測房屋內一氧化碳的電氣裝置 選擇、安裝、使用和維護指南 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Guide on the selection, installation, use and maintenance |
| EN 54-1 | 火災探測和火災警報系統 第1部分：介紹 | Fire detection and fire alarm systems - Part 1: Introduction |
| EN 54-10 | 火災探測和火災警報系統 第10部分：火焰探測器 點探測器 | Fire detection and fire alarm systems - Part 10: Flame detectors; Point detectors |
| EN 54-11 | 火災探測和火災警報系統 第11部分：人工呼叫點 | Fire detection and fire alarm systems - Part 11: Manual call points |
| EN 54-12 | 火災探測和火災警報系統 第12部分：煙霧探測器 使用光束的線探測器 | Fire detection and fire alarm systems - Part 12: Smoke detectors; Line detectors using an optical light beam |
| EN 54-2-1997+AC | 火災探測和火災警報系統 第2部分：控制和指示設備 | Fire detection and fire alarm systems - Part 2: Control and indicating equipment |
| EN 54-2/prA1 | 火災探測和火災警報系統 第2部分：控制和指示設備 修改A1 | Fire detection and fire alarm systems - Part 2: Control and indicating equipment; Amendment A1 |
| EN 54-3 | 火災探測和火災警報系統 第3部分：火災警報設備 發聲器 | Fire detection and fire alarm systems - Part 3: Fire alarm devices; Sounders |
| EN 54-4-1997+AC-1999+A1 | 火災探測和火災警報系統 第4部分：電源設備 | Fire detection and fire alarm systems - Part 4: Power supply equipment / Note: To be amended by EN 54-4/prA2 (2003-06). |
| EN 54-5 | 火災探測和火災警報系統 第5部分：熱探測器 點探測器 | Fire detection and fire alarm systems - Part 5: Heat detectors; Point detectors |
| EN 54-7 | 火災探測和火災警報系統 第7部分：煙霧探測器 使用散射光、透射光或電離的點探測器 | Fire detection and fire alarm systems - Part 7: Smoke detectors; Point detectors using scattered light, transmitted light or ionization |
| EN 60601-2-9 | 醫用電器設備 第2－9部分：放射治療中與患者接觸的計量儀與輻射探測器連接的安全專用要求 | Medical electrical equipment - Part 2-9: Particular requirements for the safety of patient contact dosemeters used in radiotherapy with electrically connected radiation detectors (IEC 60601-2-9:1996) |
| EN 60749-20 | 半導體器件 機械和氣候試驗方法 第20部分：用塑料封裝的半導體磁場探測器對潮濕和焊熱結合效應的阻抗 | Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat (IEC 60749-20:2002) / Note: Endorsement notice |
| EN 61040 | 激光輻射功率和能量測量探測器、儀表和設備 | Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990) |
| EN 61243-2-1997+A1-2000+A2 | 帶電作業 電壓探測器 第2部分：1kV-36kV交流電壓用電阻型 | Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. (IEC 61243-2:1995 + corrigendum 1996, modified) |
| EN 61266 | 超聲學 手持探頭式多普勒胎兒心音探測儀 性能要求、測量方法和報告 | Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting (IEC 61266:1994) |
| EN 61674-1997+A1 | 醫用電氣設備 用于X射線診斷成像中帶電離室和/或半導體探測器的劑量儀 | Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnosis imaging (IEC 61674:1997) |
| EN 867-4 | 消毒器中使用的非生物系統 第4部分：選擇蒸汽滲透探測用Bowie和Dick試驗之一的指示器規范 | Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| EN ISO 10360-5 | 產品幾何量技術規范(GPS) 坐標測量機(CMM)的驗收和復檢試驗 第5部分：使用多觸針探測系統的坐標測量機 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems (ISO 10360-5:2000) |
| EN ISO 13927 | 塑料 用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放試驗 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001) |
| EN ISO 6888-3 | 食品和動物飼料的微生物學 凝血酶陽性葡萄球菌(金黃色葡萄球菌及其他種)計數的水平方法 第3部分：微量探 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and MPN technique for low numbers (ISO 6888-3:2003) |
| ENV 13563 | 交通控制設備 車輛探測器 | Traffic control equipment - Vehicle detectors |
| ENV 583-6 | 無損檢測 超聲波檢驗 第6部分：作為間隔性波分級和探測方法的飛行時間衍射技術 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| prEN 12411-1 | 工廠環境 直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第1部分：一般要求和試驗方法 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods |
| prEN 12411-2 | 工廠環境 直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第2部分：用于測量極限值范圍內濃度的設 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the range of limit values |
| prEN 12411-3 | 工作場所的氣體 直接探測有毒氣體和蒸氣直接測量其濃度用的電氣儀表 第3部分：用于測量遠大于極限值的 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of polluting gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values |
| prEN 12411-4 | 工作場所的氣體 工廠環境 直接探測有毒氣體和蒸氣及直接測量其濃度的電子設備 第4部分：選擇、安裝、 | Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance |
| prEN 12766-3 | 石油成制品和廢油 PCBs和相關產品的測定 第3部分：使用電子俘獲探測器通過氣相色譜分析（GC）法測定和量 | Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (PCBT) content by gas chromatography (GC) using an electron capture dectector(ECD) |
| prEN 13631-16 | 民用炸藥 烈性炸藥 第16部分：有毒氣體的探測和測量 | Exlosives for civil uses - High explosives - Part 16: Detection and measurement of toxic gases |
| prEN 50111-4 | 建筑物內及周圍的報警系統 第4部分：報警系統 入侵探測系統和攔劫系統 報警器 | Alarm systems in and around buildings; part 4: alarm system, intrusion and hold-up systems; warning devices |
| prEN 50131-2-1 | 報警系統 干擾系統 第2-1部分：干擾探測器 一般要求 | Alarm system; intrusion system; part 2-1: intrusion detectors; common requirements |
| prEN 50131-2-2 | 報警系統 干擾系統 第2-2部分：無源紅外探測器要求 | Alarm systems - Intrusion systems - Part 2-2: Requirements for passive infrared detectors |
| prEN 54-13 | 火災探測和火災警報系統 第13部分：系統要求和兼容性評定 | Fire detection and fire alarm systems - Part 13: System requirements and compatibility assessment |
| prEN 54-14 | 火災探測和火災警報系統 第14部分：計劃、設計、安裝、試運轉、使用和維護指南 | Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance |
| prEN 60839-2-7 | 報警系統 第2部分：入侵者報警系統的要求 第7節：建筑物使用的玻璃斷口狀通過探測器 草案 | Draft IEC 60839-2-7: Alarm systems - Part 2: Requirements for intruder alarm systems - Section 7: Passive glass-break detectors for use in buildings |
| 編號 | 中文名稱 | 英文名稱 |