微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 10048 | 熱軋窄鋼帶 尺寸和形狀公差 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10126 | 半成品交貨的冷軋非合金鋼電工鋼薄板和鋼帶 | Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state |
| EN 10132-1 | 熱處理用冷軋窄鋼帶 交貨技術條件 第1部分：總則 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| EN 10132-2 | 熱處理用冷軋窄鋼帶 交貨技術條件 第2部分：表面硬化鋼 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels |
| EN 10132-3 | 熱處理用冷軋窄鋼帶 交貨技術條件 第3部分：淬火和回火鋼 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering |
| EN 10132-4-2000+AC | 熱處理用冷軋窄鋼帶 交貨技術條件 第4部分：彈簧鋼和其它應用的鋼 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications |
| EN 10140 | 冷軋窄鋼帶 尺寸和形狀公差 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10151 | 彈簧用不銹鋼鋼帶 交貨技術條件 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10214 | 連續熱浸鍍鋅鋁薄鋼板和鋼帶 交貨技術條件 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions |
| EN 10215 | 連續熱浸鍍鋁鋅薄鋼板和鋼帶 交貨技術條件 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions |
| EN 10246-15 | 鋼管的無損檢測 第15部分：層狀缺陷探測用的制造焊接鋼管用鋼帶/鋼板的自動超聲檢驗 | Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| EN 10251 | 磁性材料 測定電工鋼片和電工鋼帶幾何特性值的方法 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| EN 10265 | 磁性材料 鋼板和鋼帶的機械特性和導磁率的規范 | Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| EN 10292-2000+A1 | 冷成型用較高屈服強度的連續熱扎鍍層鋼帶和薄鋼板 交貨技術條件 | Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions |
| EN 10303 | 中頻用薄磁鋼板和鋼帶 | Thin magnetic steel sheet and strip for use at medium frequencies |
| EN 13246 | 包裝 拉伸鋼帶規范 | Packaging - Specification for tensional steel strapping |
| EN 13247 | 包裝 載荷提升、捆綁和固定用拉伸鋼帶規范 | Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads |
| EN 2810 | 航空航天系列 耐熱純化鋼帶槽／帶眼扁矮普通對邊六角螺母 等級：900 MPa (環境溫度)/650℃ | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 523 | 預應力鋼筋束用鋼帶材護套 術語、要求、質量控制 | Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control |
| EN 524-1 | 預應力鋼筋束用鋼帶材護套 試驗方法 第1部分：形狀和尺寸的確定 | Steel strip sheaths for prestressing tendons - Test methods - Part 1: Determination of shape and dimensions |
| EN 524-2 | 預應力鋼筋束用鋼帶材護套 試驗方法 第2部分：撓性的測定 | Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour |
| EN 524-3 | 預應力鋼筋束用鋼帶材護套 試驗方法 第3部分：反復彎曲試驗 | Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test |
| EN 524-4 | 預應力鋼筋束用鋼帶材護套 試驗方法 第4部分：抗橫向負載力的測定 | Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance |
| EN 524-5 | 預應力鋼筋束用鋼帶材護套 試驗方法 第5部分：抗拉伸負載力的測定 | Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance |
| EN 524-6 | 預應力鋼筋束用鋼帶材護套 試驗方法 第6部分：密封性的測定(水流失的測定) | Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss) |
| EN 60404-2 | 磁性材料 第2部分：用愛普斯坦框系統測量電工鋼片和鋼帶的磁性能的方法 | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC 60404-2:1996) |
| prEN 10326 | 連續熱浸鍍結構鋼帶和薄鋼帶 交貨技術條件 | Continuously hot-dip coated structural steels strip and sheet - Technical delivery conditions |
| prEN 10327 | 冷成形用連續熱浸鍍冷扎低碳鋼帶和薄鋼帶 交貨技術條件 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| prEN 4351 | 航空航天系列 耐腐蝕鋼帶自對中雙排滾珠軸承和帶螺紋柄的活塞桿端 尺寸和負荷 英制 | Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in corrosion resisting steel - Dimensions and loads - Inch series |
| 編號 | 中文名稱 | 英文名稱 |