微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 11854 | 食品工業用管配件.不銹鋼制軟管.帶螺紋的軟管接頭和軟管錐形接頭 | Food industry fittings; hose unions of stainless steel; threaded hose couplings, conical hose couplings |
| DIN 12215 | 玻璃實驗儀器.軟管連接用玻璃管端.橄欖形和毛細管端 | Laboratory glassware; glass tube ends for hose connections, olives, capillary tube ends |
| DIN 12865 | 實驗室儀器.橡膠管 | Laboratory apparatus; rubber tubing |
| DIN 14312 | 標稱壓力為16、壓力吸水用消防軟管B型鋁合金聯接器 | Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16 |
| DIN 14330-1 | S 28 消防軟管用標稱壓力PN16 C型鋁合金聯軸器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 28 |
| DIN 14330-2 | S 38 消防軟管用標稱壓力PN16 C型鋁合金聯軸器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 32 |
| DIN 14330-3 | 急救S形橡膠管C型輸液聯接器.第3部分:C-S 28型和C-S 32型輸液聯接器用連接裝置 | Delivery coupling, type C, for first aid rubber hoses S; bind-apparatus for delivery coupling type C-S 28 and C-S 32 |
| DIN 14332 | 輸送管路的C型鋁合聯接器.公稱壓力16 .用于 C42 消防軟管 | Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42 |
| DIN 14461-5 | 與干式滅火上升總管道連接的輸送閥裝置.PN16救火軟管閥 | Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16 |
| DIN 14462 Berichtigung 1 | 滅火用引水管.滅火軟管系統和引水管道的規劃和安裝.DIN 14462-2007勘誤表 | Water conduit for fire extinguishing - Planning and installation of fire hose systems and water conduit for fire extinguishing, Corrigenda to DIN 14462:2007-01 |
| DIN 14463-1 | 消防滅火用給水系統.遙控注水和泄水裝置.第1部分:消防軟管的卷取系統 | Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 1: For hose reel systems |
| DIN 14572 | 排氣金屬軟管用排氣金屬軟管和聯軸器 | Exhaust gas metal hoses and couplings for exhaust gas metal hoses |
| DIN 14819 | 滅火劑用吸收軟管.要求.檢驗方法、處理 | Pick up hose for extinguishing agents; requirements, test methods, treatment |
| DIN 14820-1 | 消防水龍管橋架.第1部分:木制消防軟管橋架 | Bridges for fire hoses - Part 1: Bridges for fire hoses of wood |
| DIN 14827-1 | 消防設備.輸水軟管運輸用籠筐.第1部分:B、C和D型輸水軟管運輸用籠筐 | Fire fighting equipment - Cages for transport of delivery hoses - Part 1: Cages for transport of delivery hoses type B, C and D |
| DIN 14828 | 繩索軟管架 | Rope hose holders |
| DIN 19658-2 | 灌溉系統用可卷繞聚乙烯(PE)管道和軟管.第2部分:形狀固定的織物芯層軟管.尺寸和供貨技術條件 | Polyethylene (PE) coiling pipes and hoses for irrigation systems - Part 2: Hoses with fabric inlay, rigid form; dimensions and technical delivery conditions |
| DIN 19658-3 | 灌溉系統用可盤繞聚乙烯(PE)管和軟管.帶織物內層的非剛性材料軟管.第3部分:尺寸和供貨技術條件 | Polyethylene (PE) coiling pipes and hoses for use in irrigation systems; hoses of nonrigid material with woven fabric inner layer; dimensions and technical delivery conditions |
| DIN 20018-1 | 織物增強軟管.第1部分:最大工作壓力PN 10/16 | Textile-reinforced hoses - Part 1: Maximal working pressure PN 10/16 |
| DIN 20018-2 | 織物增強軟管.第2部分:最大工作壓力PN 40 | Textile-reinforced hoses - Part 2: Maximal working pressure PN 40 |
| DIN 20018-3 | 織物增強軟管.第3部分:最大工作壓力PN 100 | Textile-reinforced hoses - Part 3: Maximal working pressure PN 100 |
| DIN 20018-4 | 織物增強軟管.第4部分:試驗 | Textile-reinforced hoses - Part 4: Testing |
| DIN 20021 | 液壓系統.帶襯里的軟管.DIN EN 853至DIN EN 857的補充件 | Fluid-systems - Hoses with layer - Completation for DIN EN 853 to DIN EN 857 |
| DIN 20029 | 軟管管接頭.1:3 錐度量規 | Hose fittings; 1:3 taper gauges |
| DIN 20030 | 軟管連接件.帶柄的直旋塞.尺寸、材料和要求 | Hose fittings; straight-way-cock with grip; dimensions, materials, requirements |
| DIN 20033 | 軟管連接件.帶壓緊螺母的錐形管嘴 | Hose fittings; tapered nozzle with clamping nut |
| DIN 20035 | 軟管管接頭.法蘭管嘴.公稱壓力16 | Hose fittings; flange nozzle; nominal pressure 16 |
| DIN 20036 | 軟管管接頭.圓螺紋的管接頭套管 | Hose fittings; coupling nipples with round thread form |
| DIN 20037 | 軟管管接頭.連接套管.尺寸 | Hose fittings; connecting nipple; dimensions |
| DIN 20038 | 軟管管接頭.接頭管嘴 | Hose fittings; coupling nozzles |
| DIN 20039 | 軟管連接件.軟管夾 | Hose fittings - Hose clamps |
| DIN 20040 | 軟管管接頭.連接套管閥.公稱壓力16 | Hose fittings; nipple valves; nominal pressure 16 |
| DIN 20066 | 流體動力系統.軟管組件.尺寸、要求 | Fluid power systems - Hose assemblies - Dimensions, requirements |
| DIN 22100-5 | 地下礦井用合成器材和材料.管、管隔離件和軟管.安全要求、檢驗、標識 | Articles and materials from synthetic for use in underground mines; tubes, tube isolations and hoses; safety requirements, testing, marking |
| DIN 24950-1 | 第1部分:液壓和氣動軟管組件術語 | Oilhydraulic and pneumatic; terms for hose assemblies |
| DIN 25624-1 | 有軌機動車部件名稱.互通通道.第1部分:橡膠管通道連接 | Terms for railway vehicle parts - Intercommunicating gangways - Part 1: Rubber tube gangway connection |
| DIN 2827 | 化學制品用不銹鋼軟管 | Hose assemblies of stainless steel for chemical products |
| DIN 3017-1 | 渦輪傳動軟管卡圈.A型 | Hose clamps with worm gear drive; shape A |
| DIN 3017-2 | 軟管卡箍.第2部分:帶緊固凸緣的卡箍 | Hose clamps - Part 2: Clamps with fastening lugs |
| DIN 3017-3 | 軟管卡箍.第3部分:螺栓卡箍 | Hose clamps - Part 3: Bolt clamps |
| DIN 3017-4 | 軟管卡圈.第4部分:技術交貨條件 | Hose clamps - Part 4: Technical delivery conditions |
| DIN 3017-5 | 軟管卡箍.第5部分:帶緊固凸耳的寬帶軟管卡箍.D型和E型 | Hose clamps - Part 5: Wide strip hose clamps with fastening lugs; Types D and E |
| DIN 3021-1 | 軟管夾件.彈簧板夾件(FBS).第1部分:尺寸、標記、材料和類型 | Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types |
| DIN 3021-2 | 軟管夾子.彈簧帶夾子.第2部分:交貨技術條件 | Hose clamps - Spring band clamp - Part 2: Technical delivery conditions |
| DIN 3021-3 | 軟管夾子.彈簧帶夾子.第3部分:系統: 彈簧帶夾子-軟管-插口 | Hose clamps - Spring band clamp - Part 3: System: Spring band clamp-hose-spigot |
| DIN 30664-1 | 不帶外罩和配筋的實驗室用燃?xì)庠钴浌?第1部分:安全要求和試驗 | Hoses for gasfired burners for laboratories, without shroud and armoring - Part 1: Safety requirements and tests |
| DIN 30693 | 液化石油氣用軟管的防斷裂安全防護裝置 | Safety devices against rupture of flexible tubes for LPG |
| DIN 3238 | 壓縮空氣匹配件.爪狀匹配件,帶安全螺母內部寬度42mm,具有凸或凹軟管連接末端的匹配件連接環 | Couplings for compressed air - Claw coupling, 42 mm internal width, with securing nut - Coupling with male, female and hose connection ends, joint ring |
| DIN 3285 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.軟管連接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples |
| DIN 3291 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的軟管連接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples |
| DIN 3383-1 | 煤氣軟管組件和連接閥.安全軟管組件、帶有快速連接裝置的安全閥 | Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device |
| DIN 3383-2 | 燃?xì)廛浌芗斑B接件.第2部分:剛性連接軟管 | Hose assemblies and connection valves for gas - Part 2: Hose assemblies for rigid connection |
| DIN 3383-4 | 軟管組件和連接配件.煤氣用安全連接配件和試驗室管路用接頭 | Hose assemblies and connection fittings; safety connection fittings for gas and couplings for laboratory tubing |
| DIN 3384 | 燃?xì)庥貌讳P鋼軟管組件.安全要求、測試和標記 | Hose assemblies of stainless steel for gas - Safety requirements, testing, marking |
| DIN 3489 | 壓縮空氣匹配件.爪狀匹配件,無安全螺母的42mm內寬,凸形凹形匹配件,軟管和封閉連接末端旋轉匹配件,連接環 | Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring |
| DIN 47632-1 | 1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.保護性連接套管 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes |
| DIN 47632-2 | 1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.內套管 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes |
| DIN 47632-3 | 1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.導線橫截面的配置 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections |
| DIN 47632-4 | 1KV以下的塑料絕緣電力電纜用熱縮塑料軟管的連接套管.內部結構 | Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction |
| DIN 4815-2 | 液化氣用軟管.軟管組件 | Hoses for LPG; hose assemblies |
| DIN 4815-3 | 液化氣用軟管.運輸車輛用加氣和排空用軟管管道 | Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles |
| DIN 4815-4 | 液化石油氣用軟管.車輛燃?xì)庋b置用軟管和軟管組件 | Hoses for LPG; hoses and hose assemblies for fuel gas installations in vehicles |
| DIN 4815-5 | 液化氣用軟管.車輛液化氣管道用軟管接合器.第5部分:安全要求概念、試驗、標記 | Hoses for LPG; coupling for LPG hose assemblies in vehicles; concepts safety requirements, tests, marking |
| DIN 49012 | 電氣裝置用導管和管件.用于重機械應力的金屬軟管.結構形式和要求 | Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stresses construction types and requirements |
| DIN 5065 | 包裝.金屬及塑料軟管用端口塑料密封物 | Packaging; plastic closures for metal and plastic tubes |
| DIN 6103 | 包裝材料.圓柱形塑料軟管.同軸多層管.尺寸、材料 | Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials |
| DIN 65164-1 | 航空航天.非金屬編織軟管.第1部分:尺寸、重量 | Aerospace - Non metallic braided cable sleevings - Part 1: Dimensions, masses |
| DIN 65164-2 | 航空航天.非金屬編織軟管.第2部分:技術規范 | Aerospace - Non metallic braided cable sleevings - Part 2: Technical specification |
| DIN 65178-6 | 航空航天.液體管道的構造和設計.軟管組件、制造 | Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture |
| DIN 65210-1 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第1部分:軟管技術規范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses |
| DIN 65210-2 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第2部分:軟管配件技術規范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings |
| DIN 65210-3 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第3部分:成套軟管組件技術規范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies |
| DIN 65211-1 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第1部分:軟管技術規范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses |
| DIN 65211-2 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第2部分:軟管配件技術規范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings |
| DIN 65211-3 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第2部分:成套軟管組件技術規范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies |
| DIN 65212 | 航空航天.儀表的低壓軟管.技術規范 | Aerospace; instrumentation low pressure hoses; technical specification |
| DIN 65213 | 航空航天.公稱壓力為35巴以下的套管連接用軟管.技術規范 | Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification |
| DIN 73379-1 | 燃油軟管.第1部分:尺寸、材料、標記 | Fuel hoses - Part 1: Dimensions, material, marking |
| DIN 73379-2 | 燃油軟管.第2部分:要求和試驗 | Fuel hoses - Part 2: Requirements and tests |
| DIN 73411-1 | 汽車?yán)鋮s管.軟管和元件.第1部分:尺寸、材料、類型 | Cooling pipes in motor vehicles - Hoses and compounds - Part 1: Dimensions, materials, types |
| DIN 73411-2 | 汽車?yán)鋮s管.軟管和化合物.第2部分:要求和試驗 | Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing |
| DIN 74225 | 液壓制動軟管組件.制動用軟管接頭.制動軟管夾 | Brake hose assemblies; brake hose fittings; brake hose clips |
| DIN 74286 | 氣壓制動系統.雙管氣壓制動系統的軟管聯結器的密封圈 | Air braking systems; packing rings for hose couplings for double line braking systems |
| DIN 74304 | 壓接管接頭.軟管接頭 | Compression coupling; hose coupling |
| DIN 74310-1 | 氣壓制動設備.軟管.尺寸、材料、標志 | Air braking systems; hoses; dimensions, material, marking |
| DIN 74310-2 | 氣壓制動設備.軟管.要求、試驗 | Air braking systems; hoses; requirements, tests |
| DIN 74325 | 氣壓制動系統.軟管連接管.形狀和尺寸 | Air braking systems; hose nipples; shapes, dimensions |
| DIN 7591 | 家用設備的水管配件.公稱壓力10巴的兩端用軟管連接的帶扁平墊圈的螺紋連接管 | Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10 |
| DIN 7714 | 硬橡膠管 | Ebonite pipes |
| DIN 7715-40 | 橡膠產品.尺寸公差.軟管 | Rubber products - Dimmensional tolerances; hoses |
| DIN 85005-2 | 船舶和海上技術.技術文獻的圖形符號.第2部分:管和軟管組件.管和軟管連接.套管 | Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose-joints, penetrations |
| DIN 8541-2 | 焊接、切割和相關工藝用軟管.燃料氣體、氧氣和其它不可燃?xì)怏w用帶外保護套的軟管 | Hoses for welding, cutting and allied processes; hoses with protective cover for use with fuel gas, oxygen and other non-combustible gases |
| DIN 8541-3 | 焊接、切割和相關工藝用橡膠軟管.第3部分:特殊要求用有涂層和無涂層的氧化橡膠軟管.安全要求和檢驗 | Rubber hoses for welding, cutting and allied processes - Part 3: Oxygen rubber hoses with and without coatings for special requirements; safety requirements and testing |
| DIN 86200 | 滅火和甲板沖洗設備.軟管接頭.管件.軟管.附件.造船用各類管件產品概要 | Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding |
| DIN 86204 | 船舶用黃銅制公稱壓力16的C型整體消防軟管接頭 | Solid fire hose coupling type C, PN 16; made of brass, for use on ships |
| DIN 86205 | 船舶用黃銅制公稱壓力16的B型整體消防軟管接頭 | Solid fire hose coupling type B, PN 16; made of brass for use on ships |
| DIN 86211 | 公稱壓力（PN）16、帶C或B型消防軟管管接頭和帶法蘭連接的滅火閥 | Fire valves for PN 16, with fire hose couplings type C or B and with flange connection |
| DIN 9462 | 航空航天.軟管組件.測量 | Aerospace; hose assemblies; survey |
| DIN CEN/TS 14421 | 壓接和模鍛的軟管口和金屬環 | Hose tail and ferrule for crimping and swaging; German version CEN/TS 14421:2006 |
| DIN EN 10324 | 鋼絲和鋼絲制品.軟管加筋線 | Steel wire and wire products - Hose reinforcement wire; German version EN 10324:2004 |
| DIN EN 1113 | 盥洗室(PN 10)管件用淋浴噴頭軟管 | Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997 |
| DIN EN 12115 Bb.1 | 液體或氣體化學品用橡膠和熱塑軟管和軟管組件.規范.耐受性 | Rubber and thermoplastic hoses and hose assemblies for liquid or gaseous chemicals - Specification - Resistance |
| DIN EN 12115 | 液體或氣體化合物用橡膠和熱塑性軟管及軟管組件.規范 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:1999 |
| DIN EN 12324-1 | 灌溉方法.噴灌用繞軟管輪系統.第1部分:尺寸系列 | Irrigation technic - Reel machine systems - Part 1: Size series; German version EN 12324-1:1998 |
| DIN EN 12375 | 包裝.鋁軟管.管壁厚度的測定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998 |
| DIN EN 12377 | 包裝材料.軟管材.封閉體的氣密性試驗方法 | Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998 |
| DIN EN 12434 | 低溫容器.低溫軟管 | Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000 |
| DIN EN 1256 | 氣焊設備.焊接、切割和相關工藝設備用軟管組件規范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes; German version EN 1256:2006 |
| DIN EN 13045 | 包裝.圓柱形塑料軟管.尺寸和公差 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2000 |
| DIN EN 13046 | 包裝.圓柱形金屬軟管.尺寸和公差 | Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; German version EN 13046:2000 |
| DIN EN 13047 | 包裝.圓錐形金屬軟管.尺寸和公差 | Packaging - Flexible conical metallic tubes - Dimensions and tolerances; German version EN 13047:2000 |
| DIN EN 13048 | 包裝.鋁軟管.內部清漆薄膜厚度測量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000 |
| DIN EN 13180 | 建筑物通風.通氣管結構.軟管尺寸和機械要求 | Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts; German version EN 13180:2001 |
| DIN EN 1327 | 氣焊機.焊接及相關工藝用熱塑軟管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes; German version EN 1327:1996 |
| DIN EN 13461 | 包裝.圓柱形層壓軟管.尺寸和公差 | Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; German version EN 13461:2001 |
| DIN EN 13482 | 瀝青用橡膠軟管及軟管組件.規范 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification; German version EN 13482:2001 |
| DIN EN 13483 | 可測量的燃料分配系統用帶內部蒸氣回收的橡膠和塑料軟管和軟管組件.規范 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification; German version EN 13483:2005 |
| DIN EN 1360 | 已測燃料分配系統用橡膠和塑料軟管及軟管組件.規范 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification; German version EN 1360:2005 |
| DIN EN 1361 | 航空燃料輸送用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification; German version EN 1361:2004 |
| DIN EN 13765 | 烴類、溶劑和化學品輸送用熱塑性多層(非硫化)塑料軟管和軟管組件.規范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification; German version EN 13765:2003 |
| DIN EN 13766 | 液化石油氣和液化天然氣輸送熱塑性多層非硫化軟管和軟管組件.規范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification; German version EN 13766:2003 |
| DIN EN 138 | 呼吸防護器.清潔空氣.全面罩、半面罩或口罩連接軟管裝置.要求、測試,標記 | Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking; German version EN 138:1994 |
| DIN EN 13905 | 衛生設備旋塞用低阻力淋浴軟管 | Low resistance shower hoses for sanitary tapware; German version EN 13905:2003 |
| DIN EN 14420-1 | 帶夾具的軟管配件.第1部分:要求、檢查、名稱與符號和試驗 | Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing; English version of DIN EN 14420-1:2007-04 |
| DIN EN 14420-2 | 帶夾件的軟管配件.第2部分:軟管尾部的軟管側面部件 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail; German version EN 14420-2:2004 |
| DIN EN 14420-3 | 帶夾件的軟管配件.第3部分:栓接或銷接夾件 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned; German version EN 14420-3:2004 |
| DIN EN 14420-4 | 帶夾具的軟管配件.第4部分:法蘭接頭 | Hose fittings with clamp units - Part 4: Flange connections; English version of DIN EN 14420-4:2007-04 |
| DIN EN 14420-5 | 帶夾件的軟管配件.第5部分:螺紋連接 | Hose fittings with clamp units - Part 5: Threaded connections; German version EN 14420-5:2004 |
| DIN EN 14420-6 | 帶夾具的軟管配件.第6部分:TW油罐車接頭 | Hose fittings with clamp units - Part 6: TW tank truck couplings (includes Amendment A1:2007); English version of DIN EN 14420-6:2004+A1:2007-04 |
| DIN EN 14420-7 | 帶夾件的軟管配件.第7部分:凸輪鎖緊接頭 | Hose fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007); English version of DIN EN 14420-7:2007-04 |
| DIN EN 14420-8 | 帶夾具的軟管配件.第8部分:對稱半節管接頭(吉爾曼系統) | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) (includes Amendment A1:2007); English version of DIN EN 14420-8:2007-04 |
| DIN EN 14422 | LPG傳送軟管用對殼式耦合組件 | Clamp type coupling assemblies for LPG transfer hoses; German version EN 14422:2004 |
| DIN EN 14423 | 額定電壓18巴及以下的蒸汽軟管用對殼式耦合組件 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar; German version EN 14423:2004 |
| DIN EN 14424 | 帶螺旋箍的軟管管件 | Hose fittings with screwed ferrules; German version EN 14424:2004 |
| DIN EN 14454 | 防飲用水回流污染的裝置.軟管接頭防回流裝置DN 15至DN 32. A型H系列 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A; German version EN 14454:2005 |
| DIN EN 14540 | 滅火軟管.固定系統用非滲濾扁平軟管 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems; German version EN 14540:2004 + A1:2007 |
| DIN EN 14585-1 Bb.1 | 壓力設備用波紋金屬軟管組件.第2部分:合格評定程序使用指南 | Corrugated metal hose assemblies for pressure applications - Guidance on the use of conformity assessment procedures; English version of DIN EN 14585-1 Supplement 1:2006-04 |
| DIN EN 14585-1 | 壓力設備用波紋金屬軟管組件.第1部分:要求 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements; German version EN 14585-1:2006 |
| DIN EN 14800 | 使用氣體燃料連接家用器具的波紋狀安全金屬軟管組件 | Corrugated safety metal hose assemblies for the connection domestic appliance using gaseous fuels; German version EN 14800:2007 |
| DIN EN 1736 | 制冷系統和熱泵.軟管元件、隔振器和膨脹節.要求、設計和安裝 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; German version EN 1736:2000 |
| DIN EN 1761 | 油罐車輸油橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification; German version EN 1761:1999 |
| DIN EN 1762 | 25巴(2.5MPA)及以下液化石油氣、LPG(液相和氣相)和天然氣用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2003 |
| DIN EN 1763-1 | 商用汽態丙烷、丁烷及其混合物用橡膠和塑料管、軟管和配件.第1部分:橡膠管、塑料管和軟管要求 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000 |
| DIN EN 1763-1 | 商用汽態丙烷、丁烷及其混合物用橡膠和塑料管、軟管和配件.第1部分:橡膠管、塑料管和軟管要求 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixture in the vapour phase - Part 1: Requirements for rubber and plastics tubing and hoses; German version EN 1763-1:2000 |
| DIN EN 1765 | 油的吸放設備用橡膠軟管組件.組件規范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies; German version EN 1765:2004 |
| DIN EN 1947 | 消防軟管.泵和水車用半剛性輸水軟管和軟管組件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles; German version EN 1947:2002 + A1:2007 |
| DIN EN 24641 | 給排水橡膠軟管.要求 | Rubber hoses for water suction and discharge; specification (ISO 4641:1991); German version EN 24641:1993 |
| DIN EN 26801 | 橡膠和塑料軟管.體積膨脹的測定 | Rubber or plastics hoses; determination of volumetric expansion (ISO 6801:1983); German version EN 26801:1993 |
| DIN EN 26802 | 金屬絲增強的橡膠和塑料軟管組件.撓曲狀態下液壓脈沖試驗 | Rubber and plastics hose and hose assemblies with wire reinforcements; hydraulic impulse test with flexing (ISO 6802:1991); german version EN 26802:1993 |
| DIN EN 269 | 呼吸防護器.加護罩的電動式新鮮空氣軟管呼吸器.要求、檢驗、標記; 德文版本 EN 269:1994 | Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking; German version EN 269:1994 |
| DIN EN 27326 | 橡膠和塑料軟管.靜態條件下耐臭氧性能的評定 | Rubber and plastics hoses; assessment of ozone resistance under static conditions (ISO 7326:1991); German version EN 27326:1993 |
| DIN EN 28029 | 塑料軟管.一般用途的紡織物增強的可折疊水管 | Plastics hose; general purpose collapsible water hose, textile reinforced; specification (ISO 8029:1985); German version EN 28029:1993 |
| DIN EN 29168 | 手持式牙科器械.軟管連接件 | Dental handpieces - Hose connectors (ISO 9168:1991); German version EN 29168:1994 |
| DIN EN 559 | 氣焊機.焊接、切割和相關工藝用橡膠軟管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes; German version EN 559:2003 |
| DIN EN 560 | 氣焊設備.焊接、切割和相關工藝用設備的軟管連接 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes; German version EN 560:2005 |
| DIN EN 60684-3-151 | 絕緣軟管套.第3部分:各類管套的規范.第151頁:擠壓成型的聚氯乙烯/腈橡膠管套.一般應用 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998 |
| DIN EN 60684-3-151 | 絕緣軟管套.第3部分:各類管套的規范.第151頁:擠壓成型的聚氯乙烯/腈橡膠管套.一般應用 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpose (IEC 60684-3-151:1998); German version EN 60684-3-151:1998 |
| DIN EN 60684-3-212 Berichtigung 1 | 絕緣軟管.第3部分:各種型號軟管規范.活頁212:熱收縮聚烯烴軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006, Corrigenda to DIN EN 60684-3-212 (VDE 0341-3-212):2006-08; CENELEC-Corrigendum November 2006 to EN 60684-3-212:2006 |
| DIN EN 60684-3-212 | 絕緣軟套管.第3部分:各種型號軟管規范.活頁212:熱收縮聚烯烴軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006 |
| DIN EN 60684-3-228 | 絕緣軟套管.第3部分:各種型號軟管規范.活頁228:阻燃、耐流體、收縮比2:1的熱收縮、半硬質聚偏二氟乙烯軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:2004); German version EN 60684-3-228:2004 |
| DIN EN 60684-3-233 | 絕緣軟管襯.第3部分:各類管襯的規范.第233頁:阻燃的耐流體的收縮比為2:1的熱收縮含氟彈性管套(IEC 60684-3- | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006 |
| DIN EN 60684-3-240 bis 243 | 絕緣軟管.第3部分:各型軟管規范.240至243節:熱收縮聚四氟乙烯(PTFE)絕緣軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002); German version EN 60684-3-240 to 243:2002 |
| DIN EN 60684-3-271 | 絕緣軟套管.第3部分:各種型號軟管規范.活頁271:阻燃、耐流體、收縮比2:1的熱收縮高彈性軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:2004); German version EN 60684-3-271:2004 |
| DIN EN 60684-3-300 | 絕緣軟管.第3部分:各型軟管規范.300節:無涂層玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 |
| DIN EN 60684-3-320 | 絕緣軟管.第3部分:各型軟管規范.320節:輕度浸漬的聚對苯二甲酸乙二醇酯編織物 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated (IEC 60684-3-320:2002); German version EN 60684-3-320:2002 |
| DIN EN 60684-3-343 bis 345 | 絕緣軟管.第3部分:各型軟管規范.343至345節:無涂層可擴張乙烯三氟氯乙烯纖維編織軟管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 |
| DIN EN 60684-3-400 bis 402 | 絕緣軟管.第3部分:各型軟管規范.400至402節:帶硅彈性涂層的玻璃纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002 |
| DIN EN 60684-3-403 bis 405 | 絕緣軟管.第3部分:各型軟管規范.403至405節:丙烯酸酯玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic coating (IEC 60684-3-403 to 405:2002); German version EN 60684-3-403 to 405:2002 |
| DIN EN 60684-3-406 bis 408 | 絕緣軟管.第3部分:各種型號軟管規范.活頁406-408:帶PVC涂層的玻璃纖維編織軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003 |
| DIN EN 60684-3-420 bis 422 | 絕緣軟管.第3部分:各型軟管規范.420至422節:丙烯酸酯聚酯纖維軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002 |
| DIN EN 61479 | 帶電作業.絕緣材料的柔性導體封蓋物 (線路軟管) (IEC 61479:2001 + A1:2002); 德文版本 EN 61479:2001 + A1 | Live working - Flexible conductor covers (line hoses) of insulating material (IEC 61479:2001 + A1:2002); German version EN 61479:2001 + A1:2002 |
| DIN EN 61770 | 與總水管連接的電氣器具.避免軟管組件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets (IEC 61770:1998 + A1:2004 + A2:2006); German version EN 61770:1999 + Corrigendum December 2005 + A1:2004 + A2:2006 |
| DIN EN 62237 | 帶電作業.液壓工具和設備用帶配件的絕緣軟管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment (IEC 62237:2003, modified); German version EN 62237:2005 |
| DIN EN 671-1 | 固定式消防系統.水龍帶系統.第1部分:半剛性水龍帶的軟管卷盤; 德文版本 EN 671-1:2001 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose; German version EN 671-1:2001 |
| DIN EN 671-2/A1 | 固定式消防系統.軟管系統.第2部分:帶吹塑軟管的軟管系統 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose; German version EN 671-2:2001/A1:2004 |
| DIN EN 671-3 | 固定的消防設備.軟管系統.第3部分:半鋼性軟管卷曲機和扁平軟管系統維修 | Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose; German version EN 671-3:2000 + AC:2000 |
| DIN EN 694 | 消防軟管.固定系統用半剛性軟管 | Fire-fighting hoses - Semi-rigid hoses for fixed systems; German version EN 694:2001 + AC:2002 + AC:2003 + A1:2007 |
| DIN EN 739 | 醫療氣體用低壓軟管組件(包括修改件A1:2002); 德文版本 EN 739:1998 + A1:2002 | Low-pressure hose assemblies for use with medical gases (includes Amendment A1:2002); German version EN 739:1998 + A1:2002 |
| DIN EN 853 | 橡膠軟管和軟管組件.帶金屬絲編織層的液壓軟管.規范 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996 |
| DIN EN 854 | 橡膠軟管和軟管組件.帶織物編織層的液壓軟管.規范 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996 |
| DIN EN 855 | 塑料軟管和軟管組件.帶織物編織層的塑料液壓軟管.規范 | Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996 |
| DIN EN 856 | 橡膠軟管和軟管組件.帶金屬絲螺旋墊層的液壓軟管.規范 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996 |
| DIN EN 857 | 橡膠軟管和軟管組件.帶金屬絲編織層的緊湊型液壓軟管.規范 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996 |
| DIN EN 908 | 農林機械.帶軟管卷筒的噴灌機.安全性 | Agricultural and forestry machinery - Reel machines for irrigation - Safety; German Version EN 908:1999 |
| DIN EN ISO 10380 | 管道系統.波紋狀金屬軟管和軟管組件 | Pipework - Corrugated metal hose and hose assemblies (ISO 10380:2003); German version EN ISO 10380:2003 |
| DIN EN ISO 10806 | 管道工程.波紋狀金屬軟管用配件 | Pipework - Fittings for corrugated metal hoses (ISO 10806:2003); German version EN ISO 10806:2003 |
| DIN EN ISO 10807 | 管道工程.爆燃性空氣電纜保護用波紋金屬軟管組件 | Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996 |
| DIN EN ISO 10960 | 橡膠和塑料軟管.動態耐臭氧性評估 | Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994); German version EN ISO 10960:1996 |
| DIN EN ISO 11758 | 橡膠和塑料軟管.氙弧燈曝光.顏色和外觀變化 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995); German version EN ISO 11758:1997 |
| DIN EN ISO 1307 | 工業通用橡膠和塑料軟管.內徑和公差、長度公差 (ISO 1307:1992); 德文版本 EN ISO 1307:1995 | Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992); German version EN ISO 1307:1995 |
| DIN EN ISO 13628-2 | 石油天然氣工業.海底生產系統設計和操作.第2部分:海底和船用自由軟管系統(ISO 13628-2-2006) | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006 |
| DIN EN ISO 1401 | 農業噴灌用橡膠軟管 | Rubber hoses for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999 |
| DIN EN ISO 1402 | 橡膠和塑料軟管及軟管組件.液壓靜力試驗 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996 |
| DIN EN ISO 14113 | 氣焊設備.最大設計壓力不超過450巴液化氣橡膠及塑料軟管組件 | Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997 |
| DIN EN ISO 15465 | 管道工程.帶繞金屬軟管和軟管配件 | Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004); German version EN ISO 15465:2004 |
| DIN EN ISO 15540 | 船舶和航海技術.軟管組件耐燃性.試驗方法 | Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001 |
| DIN EN ISO 15541 | 船舶和航海技術.軟管組件耐燃性.試驗板要求 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001 |
| DIN EN ISO 1746 | 橡膠或塑料軟管和管道.彎曲試驗 | Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000 |
| DIN EN ISO 2398 | 壓縮空氣用紡織纖維增強橡膠軟管.規范 | Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995); German version EN ISO 2398:1997 |
| DIN EN ISO 3861 | 噴砂橡膠軟管.規范 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 |
| DIN EN ISO 3994 | 塑料軟管.給排含水物質用螺旋熱塑塑料增強的熱塑塑料軟管.規范 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 |
| DIN EN ISO 4023 | 蒸汽用橡膠軟管.試驗方法 (ISO 898-7:1992); 德文版本 EN 20898-7:1995 | Rubber hoses for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995 |
| DIN EN ISO 4080 | 橡膠和塑料軟管和軟管組件.透氣性測定 (ISO 4080:1991); 德文版本 EN ISO 4080:1995 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995 |
| DIN EN ISO 4671 | 橡膠和塑料軟管及軟管組件.尺寸測量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 |
| DIN EN ISO 4672 | 橡膠和塑料軟管.低于室溫的柔性試驗 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999 |
| DIN EN ISO 5771 | 輸送無水氨用橡膠軟管和軟管組件.規范 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:1994, including Corr 1:1995); German version EN ISO 5771:1996 |
| DIN EN ISO 5774 | 壓縮空氣用織物增強塑料軟管.規范 | Plastics hoses, textile-reinforced, for compressed air - Specification (ISO 5774:1997); German version EN ISO 5774:2000 |
| DIN EN ISO 6134 | 飽和蒸汽用橡膠軟管和軟管組件.規范(ISO 6134-2005).德文版本 EN ISO 6134 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005); German version EN ISO 6134:2005 |
| DIN EN ISO 6224 | 帶織物加固內襯的橡膠供水軟管.規范 | Plastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997 |
| DIN EN ISO 6803 | 橡膠和塑料軟管及軟管組件.無彎曲液壓壓力脈沖試驗 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997 |
| DIN EN ISO 6806 | 油燃燒器軟管和軟管組件.規范 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:1992); German version EN ISO 6806:1995 |
| DIN EN ISO 6807 | 旋轉式鉆探和振動裝置用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003); German version EN ISO 6807:2003 |
| DIN EN ISO 6808 | 給排油用塑料軟管及軟管組件.規范 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000 |
| DIN EN ISO 6945 | 橡膠軟管.外覆層耐磨性的測定 | Rubber hoses - Determination of abrasion resistance of the outer cover (ISO 6945:1991) (including Amendment A1); German version EN ISO 6945:1996 + A1:2000 |
| DIN EN ISO 7233 | 橡膠和塑料軟管和軟管組件.吸入阻力測定 (ISO 7233:1991); 德文版本 EN ISO 7233:1995 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995 |
| DIN EN ISO 7369 | 管道工程.金屬軟管和軟管組件.詞匯 | Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004 |
| DIN EN ISO 7662 | 橡膠和塑料軟管.內襯磨損測定 | Rubber and plastics hoses - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996 |
| DIN EN ISO 7751 | 橡膠和塑料軟管及軟管組件.試驗壓力和爆破壓力與設計工作壓力的比值 (ISO 7751:1991); 德文版本 EN ISO 775 | Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 |
| DIN EN ISO 7840 | 小艇.耐火燃油軟管 | Small craft - Fire resistant fuel hoses (ISO 7840:2004); German version EN ISO 7840:2004 |
| DIN EN ISO 8028 | 真空噴漆用橡膠和/或塑料軟管組件.規范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000 |
| DIN EN ISO 8030 | 橡膠和塑料軟管.易燃燒性試驗方法 | Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995); German version EN ISO 8030:1997 |
| DIN EN ISO 8031 | 橡膠和塑料軟管及軟管組件.電阻測定 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance (ISO 8031:1993); German version EN ISO 8031:1997 |
| DIN EN ISO 8032 | 橡膠和塑料軟管組件.結合液壓脈沖試驗的軟管彎曲試驗(半Ω 型彎曲試驗) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999 |
| DIN EN ISO 8033 | 橡膠和塑料軟管.元件間附著力的測定(ISO 8033:2006) | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2006); English version of DIN EN ISO 8033:2006-11 |
| DIN EN ISO 8308 | 橡膠和塑料軟管及管系.軟管和管壁的透液量測定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993); German version EN ISO 8308:1995 |
| DIN EN ISO 8330 | 橡膠和塑料軟管和軟管組件.詞匯 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000 |
| DIN EN ISO 8469 | 小型船舶.非耐火燃料軟管 (ISO 8469-2006) | Small craft - Non-fire-resistant fuel hoses (ISO 8469:2006); English version of DIN EN ISO 8469:2006-10 |
| DIN EN ISO 8580 | 橡膠和塑料軟管.靜定狀態下抗紫外線的測定 (ISO 8580:1987); 德文版本 EN ISO 8580:1995 | Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995 |
| DIN ISO 10502 | 航空航天.溫度為230℃以下氣壓為10500KPa時使用的聚四氟乙烯(PTFE)軟管.采購規范 | Aerospace - Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992) |
| DIN ISO 12151-2 | 液壓傳動和通用連接件.軟管接頭.第2部分:帶ISO 8434-1和8434-4 24°錐形連接件末端和O形圈的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003) |
| DIN ISO 12151-3 | 液壓傳動和通用連接件.軟管接頭.第3部分:帶ISO 6162法蘭末端的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999) |
| DIN ISO 6772 | 航空航天.流體系統.液壓軟管、管道和連接組件的脈沖試驗 (ISO 6772:1988) | Aerospace - Fluid systems - Impulse testing of hydraulic hose, tubing and fitting assemblies (ISO 6772:1988) |
| DIN ISO 7258 | 航空航天.航空航天用聚四氟乙烯(PTFE)軟管.密度和相對密度的測定方法.與ISO7258, 1984相同 | Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984 |
| DIN V 65900-13 | 航空航天系列.液體和氣體用的柔性軟管和軟管組件的設計及制造.安裝 | Aerospace series - Design and construction of flexible hoses and hose assemblies for fluids in liquid and gaseous condition - Installation (AECMA Technical Report TR 2675:1996 + Corrigendum 1997) |
| 編號 | 中文名稱 | 英文名稱 |